1 Device tree configuration for Renesas IIC (sh_mobile) driver
5 - "renesas,iic-r8a73a4" (R-Mobile APE6)
6 - "renesas,iic-r8a7740" (R-Mobile A1)
7 - "renesas,iic-r8a7790" (R-Car H2)
8 - "renesas,iic-r8a7791" (R-Car M2-W)
9 - "renesas,iic-r8a7792" (R-Car V2H)
10 - "renesas,iic-r8a7793" (R-Car M2-N)
11 - "renesas,iic-r8a7794" (R-Car E2)
12 - "renesas,iic-r8a7795" (R-Car H3)
13 - "renesas,iic-sh73a0" (SH-Mobile AG5)
14 - "renesas,rcar-gen2-iic" (generic R-Car Gen2 compatible device)
15 - "renesas,rcar-gen3-iic" (generic R-Car Gen3 compatible device)
16 - "renesas,rmobile-iic" (generic device)
18 When compatible with a generic R-Car version, nodes
19 must list the SoC-specific version corresponding to
20 the platform first followed by the generic R-Car
23 renesas,rmobile-iic must always follow.
25 - reg : address start and address range size of device
26 - interrupts : interrupt of device
27 - clocks : clock for device
28 - #address-cells : should be <1>
29 - #size-cells : should be <0>
32 - clock-frequency : frequency of bus clock in Hz. Default 100kHz if unset.
33 - dmas : Must contain a list of two references to DMA
34 specifiers, one for transmission, and one for
36 - dma-names : Must contain a list of two DMA names, "tx" and "rx".
39 Pinctrl properties might be needed, too. See there.
44 compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
45 "renesas,rmobile-iic";
46 reg = <0 0xe6500000 0 0x425>;
47 interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
48 clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
49 clock-frequency = <400000>;