Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt

   1 * Sharp GP2AP020A00F I2C Proximity/ALS sensor
   2
   3 The proximity detector sensor requires power supply
   4 for its built-in led. It is also defined by this binding.
   5
   6 Required properties:
   7
   8   - compatible : should be "sharp,gp2ap020a00f"
   9   - reg : the I2C slave address of the light sensor
  10   - interrupts : interrupt specifier for the sole interrupt generated
  11                  by the device
  12   - vled-supply : VLED power supply, as covered in ../regulator/regulator.txt
  13
  14 Example:
  15
  16 gp2ap020a00f@39 {
  17         compatible = "sharp,gp2ap020a00f";
  18         reg = <0x39>;
  19         interrupts = <2 0>;
  20         vled-supply = <...>;
  21 };