Documentation/devicetree/bindings/mtd/oxnas-nand.txt

   1 * Oxford Semiconductor OXNAS NAND Controller
   2
   3 Please refer to nand.txt for generic information regarding MTD NAND bindings.
   4
   5 Required properties:
   6  - compatible: "oxsemi,ox820-nand"
   7  - reg: Base address and length for NAND mapped memory.
   8
   9 Optional Properties:
  10  - clocks: phandle to the NAND gate clock if needed.
  11  - resets: phandle to the NAND reset control if needed.
  12
  13 Example:
  14
  15 nandc: nand-controller@41000000 {
  16         compatible = "oxsemi,ox820-nand";
  17         reg = <0x41000000 0x100000>;
  18         clocks = <&stdclk CLK_820_NAND>;
  19         resets = <&reset RESET_NAND>;
  20         #address-cells = <1>;
  21         #size-cells = <0>;
  22
  23         nand@0 {
  24                 reg = <0>;
  25                 #address-cells = <1>;
  26                 #size-cells = <1>;
  27                 nand-ecc-mode = "soft";
  28                 nand-ecc-algo = "hamming";
  29
  30                 partition@0 {
  31                         label = "boot";
  32                         reg = <0x00000000 0x00e00000>;
  33                         read-only;
  34                 };
  35
  36                 partition@e00000 {
  37                         label = "ubi";
  38                         reg = <0x00e00000 0x07200000>;
  39                 };
  40         };
  41 };