1 * AppliedMicro X-Gene PCIe interface
4 - device_type: set to "pci"
5 - compatible: should contain "apm,xgene-pcie" to identify the core.
6 - reg: A list of physical base address and length for each set of controller
7 registers. Must contain an entry for each entry in the reg-names
9 - reg-names: Must include the following entries:
10 "csr": controller configuration registers.
11 "cfg": pcie configuration space registers.
12 - #address-cells: set to <3>
13 - #size-cells: set to <2>
14 - ranges: ranges for the outbound memory, I/O regions.
15 - dma-ranges: ranges for the inbound memory regions.
16 - #interrupt-cells: set to <1>
17 - interrupt-map-mask and interrupt-map: standard PCI properties
18 to define the mapping of the PCIe interface to interrupt
20 - clocks: from common clock binding: handle to pci clock.
23 - status: Either "ok" or "disabled".
24 - dma-coherent: Present if dma operations are coherent
28 SoC specific DT Entry:
30 pcie0: pcie@1f2b0000 {
33 compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
34 #interrupt-cells = <1>;
37 reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
38 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
39 reg-names = "csr", "cfg";
40 ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */
41 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
42 dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
43 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
44 interrupt-map-mask = <0x0 0x0 0x0 0x7>;
45 interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
46 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
47 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
48 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
50 clocks = <&pcie0clk 0>;
54 Board specific DT Entry: