?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / acpi / acpica / evgpeinit.c
blob16ce4835e7d023eec158a0f639a94dfab259e78d
1 /******************************************************************************
2 *
3 * Module Name: evgpeinit - System GPE initialization and update
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2016, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 #include <acpi/acpi.h>
45 #include "accommon.h"
46 #include "acevents.h"
47 #include "acnamesp.h"
48
49 #define _COMPONENT ACPI_EVENTS
50 ACPI_MODULE_NAME("evgpeinit")
51 #if (!ACPI_REDUCED_HARDWARE) /* Entire module */
52 /*
53 * Note: History of _PRW support in ACPICA
54 *
55 * Originally (2000 - 2010), the GPE initialization code performed a walk of
56 * the entire namespace to execute the _PRW methods and detect all GPEs
57 * capable of waking the system.
58 *
59 * As of 10/2010, the _PRW method execution has been removed since it is
60 * actually unnecessary. The host OS must in fact execute all _PRW methods
61 * in order to identify the device/power-resource dependencies. We now put
62 * the onus on the host OS to identify the wake GPEs as part of this process
63 * and to inform ACPICA of these GPEs via the acpi_setup_gpe_for_wake interface. This
64 * not only reduces the complexity of the ACPICA initialization code, but in
65 * some cases (on systems with very large namespaces) it should reduce the
66 * kernel boot time as well.
67 */
68
69 /*******************************************************************************
70 *
71 * FUNCTION: acpi_ev_gpe_initialize
72 *
73 * PARAMETERS: None
74 *
75 * RETURN: Status
76 *
77 * DESCRIPTION: Initialize the GPE data structures and the FADT GPE 0/1 blocks
78 *
79 ******************************************************************************/
80 acpi_status acpi_ev_gpe_initialize(void)
81 {
82 u32 register_count0 = 0;
83 u32 register_count1 = 0;
84 u32 gpe_number_max = 0;
85 acpi_status status;
86
87 ACPI_FUNCTION_TRACE(ev_gpe_initialize);
88
89 ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
90 "Initializing General Purpose Events (GPEs):\n"));
91
92 status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
93 if (ACPI_FAILURE(status)) {
94 return_ACPI_STATUS(status);
95 }
96
97 /*
98 * Initialize the GPE Block(s) defined in the FADT
99 *
100 * Why the GPE register block lengths are divided by 2: From the ACPI
101 * Spec, section "General-Purpose Event Registers", we have:
102 *
103 * "Each register block contains two registers of equal length
104 * GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the
105 * GPE0_STS and GPE0_EN registers is equal to half the GPE0_LEN
106 * The length of the GPE1_STS and GPE1_EN registers is equal to
107 * half the GPE1_LEN. If a generic register block is not supported
108 * then its respective block pointer and block length values in the
109 * FADT table contain zeros. The GPE0_LEN and GPE1_LEN do not need
110 * to be the same size."
111 */
112
113 /*
114 * Determine the maximum GPE number for this machine.
115 *
116 * Note: both GPE0 and GPE1 are optional, and either can exist without
117 * the other.
118 *
119 * If EITHER the register length OR the block address are zero, then that
120 * particular block is not supported.
121 */
122 if (acpi_gbl_FADT.gpe0_block_length &&
123 acpi_gbl_FADT.xgpe0_block.address) {
124
125 /* GPE block 0 exists (has both length and address > 0) */
126
127 register_count0 = (u16)(acpi_gbl_FADT.gpe0_block_length / 2);
128 gpe_number_max =
129 (register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1;
130
131 /* Install GPE Block 0 */
132
133 status = acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
134 acpi_gbl_FADT.xgpe0_block.
135 address,
136 acpi_gbl_FADT.xgpe0_block.
137 space_id, register_count0, 0,
138 acpi_gbl_FADT.sci_interrupt,
139 &acpi_gbl_gpe_fadt_blocks[0]);
140
141 if (ACPI_FAILURE(status)) {
142 ACPI_EXCEPTION((AE_INFO, status,
143 "Could not create GPE Block 0"));
144 }
145 }
146
147 if (acpi_gbl_FADT.gpe1_block_length &&
148 acpi_gbl_FADT.xgpe1_block.address) {
149
150 /* GPE block 1 exists (has both length and address > 0) */
151
152 register_count1 = (u16)(acpi_gbl_FADT.gpe1_block_length / 2);
153
154 /* Check for GPE0/GPE1 overlap (if both banks exist) */
155
156 if ((register_count0) &&
157 (gpe_number_max >= acpi_gbl_FADT.gpe1_base)) {
158 ACPI_ERROR((AE_INFO,
159 "GPE0 block (GPE 0 to %u) overlaps the GPE1 block "
160 "(GPE %u to %u) - Ignoring GPE1",
161 gpe_number_max, acpi_gbl_FADT.gpe1_base,
162 acpi_gbl_FADT.gpe1_base +
163 ((register_count1 *
164 ACPI_GPE_REGISTER_WIDTH) - 1)));
165
166 /* Ignore GPE1 block by setting the register count to zero */
167
168 register_count1 = 0;
169 } else {
170 /* Install GPE Block 1 */
171
172 status =
173 acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
174 acpi_gbl_FADT.xgpe1_block.
175 address,
176 acpi_gbl_FADT.xgpe1_block.
177 space_id, register_count1,
178 acpi_gbl_FADT.gpe1_base,
179 acpi_gbl_FADT.
180 sci_interrupt,
181 &acpi_gbl_gpe_fadt_blocks
182 [1]);
183
184 if (ACPI_FAILURE(status)) {
185 ACPI_EXCEPTION((AE_INFO, status,
186 "Could not create GPE Block 1"));
187 }
188
189 /*
190 * GPE0 and GPE1 do not have to be contiguous in the GPE number
191 * space. However, GPE0 always starts at GPE number zero.
192 */
193 gpe_number_max = acpi_gbl_FADT.gpe1_base +
194 ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1);
195 }
196 }
197
198 /* Exit if there are no GPE registers */
199
200 if ((register_count0 + register_count1) == 0) {
201
202 /* GPEs are not required by ACPI, this is OK */
203
204 ACPI_DEBUG_PRINT((ACPI_DB_INIT,
205 "There are no GPE blocks defined in the FADT\n"));
206 status = AE_OK;
207 goto cleanup;
208 }
209
210 cleanup:
211 (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
212 return_ACPI_STATUS(AE_OK);
213 }
214
215 /*******************************************************************************
216 *
217 * FUNCTION: acpi_ev_update_gpes
218 *
219 * PARAMETERS: table_owner_id - ID of the newly-loaded ACPI table
220 *
221 * RETURN: None
222 *
223 * DESCRIPTION: Check for new GPE methods (_Lxx/_Exx) made available as a
224 * result of a Load() or load_table() operation. If new GPE
225 * methods have been installed, register the new methods.
226 *
227 ******************************************************************************/
228
229 void acpi_ev_update_gpes(acpi_owner_id table_owner_id)
230 {
231 struct acpi_gpe_xrupt_info *gpe_xrupt_info;
232 struct acpi_gpe_block_info *gpe_block;
233 struct acpi_gpe_walk_info walk_info;
234 acpi_status status = AE_OK;
235
236 /*
237 * Find any _Lxx/_Exx GPE methods that have just been loaded.
238 *
239 * Any GPEs that correspond to new _Lxx/_Exx methods are immediately
240 * enabled.
241 *
242 * Examine the namespace underneath each gpe_device within the
243 * gpe_block lists.
244 */
245 status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
246 if (ACPI_FAILURE(status)) {
247 return;
248 }
249
250 walk_info.count = 0;
251 walk_info.owner_id = table_owner_id;
252 walk_info.execute_by_owner_id = TRUE;
253
254 /* Walk the interrupt level descriptor list */
255
256 gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head;
257 while (gpe_xrupt_info) {
258
259 /* Walk all Gpe Blocks attached to this interrupt level */
260
261 gpe_block = gpe_xrupt_info->gpe_block_list_head;
262 while (gpe_block) {
263 walk_info.gpe_block = gpe_block;
264 walk_info.gpe_device = gpe_block->node;
265
266 status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD,
267 walk_info.gpe_device,
268 ACPI_UINT32_MAX,
269 ACPI_NS_WALK_NO_UNLOCK,
270 acpi_ev_match_gpe_method,
271 NULL, &walk_info, NULL);
272 if (ACPI_FAILURE(status)) {
273 ACPI_EXCEPTION((AE_INFO, status,
274 "While decoding _Lxx/_Exx methods"));
275 }
276
277 gpe_block = gpe_block->next;
278 }
279
280 gpe_xrupt_info = gpe_xrupt_info->next;
281 }
282
283 if (walk_info.count) {
284 ACPI_INFO(("Enabled %u new GPEs", walk_info.count));
285 }
286
287 (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
288 return;
289 }
290
291 /*******************************************************************************
292 *
293 * FUNCTION: acpi_ev_match_gpe_method
294 *
295 * PARAMETERS: Callback from walk_namespace
296 *
297 * RETURN: Status
298 *
299 * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
300 * control method under the _GPE portion of the namespace.
301 * Extract the name and GPE type from the object, saving this
302 * information for quick lookup during GPE dispatch. Allows a
303 * per-owner_id evaluation if execute_by_owner_id is TRUE in the
304 * walk_info parameter block.
305 *
306 * The name of each GPE control method is of the form:
307 * "_Lxx" or "_Exx", where:
308 * L - means that the GPE is level triggered
309 * E - means that the GPE is edge triggered
310 * xx - is the GPE number [in HEX]
311 *
312 * If walk_info->execute_by_owner_id is TRUE, we only execute examine GPE methods
313 * with that owner.
314 *
315 ******************************************************************************/
316
317 acpi_status
318 acpi_ev_match_gpe_method(acpi_handle obj_handle,
319 u32 level, void *context, void **return_value)
320 {
321 struct acpi_namespace_node *method_node =
322 ACPI_CAST_PTR(struct acpi_namespace_node, obj_handle);
323 struct acpi_gpe_walk_info *walk_info =
324 ACPI_CAST_PTR(struct acpi_gpe_walk_info, context);
325 struct acpi_gpe_event_info *gpe_event_info;
326 acpi_status status;
327 u32 gpe_number;
328 u8 temp_gpe_number;
329 char name[ACPI_NAME_SIZE + 1];
330 u8 type;
331
332 ACPI_FUNCTION_TRACE(ev_match_gpe_method);
333
334 /* Check if requested owner_id matches this owner_id */
335
336 if ((walk_info->execute_by_owner_id) &&
337 (method_node->owner_id != walk_info->owner_id)) {
338 return_ACPI_STATUS(AE_OK);
339 }
340
341 /*
342 * Match and decode the _Lxx and _Exx GPE method names
343 *
344 * 1) Extract the method name and null terminate it
345 */
346 ACPI_MOVE_32_TO_32(name, &method_node->name.integer);
347 name[ACPI_NAME_SIZE] = 0;
348
349 /* 2) Name must begin with an underscore */
350
351 if (name[0] != '_') {
352 return_ACPI_STATUS(AE_OK); /* Ignore this method */
353 }
354
355 /*
356 * 3) Edge/Level determination is based on the 2nd character
357 * of the method name
358 */
359 switch (name[1]) {
360 case 'L':
361
362 type = ACPI_GPE_LEVEL_TRIGGERED;
363 break;
364
365 case 'E':
366
367 type = ACPI_GPE_EDGE_TRIGGERED;
368 break;
369
370 default:
371
372 /* Unknown method type, just ignore it */
373
374 ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
375 "Ignoring unknown GPE method type: %s "
376 "(name not of form _Lxx or _Exx)", name));
377 return_ACPI_STATUS(AE_OK);
378 }
379
380 /* 4) The last two characters of the name are the hex GPE Number */
381
382 status = acpi_ut_ascii_to_hex_byte(&name[2], &temp_gpe_number);
383 if (ACPI_FAILURE(status)) {
384
385 /* Conversion failed; invalid method, just ignore it */
386
387 ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
388 "Could not extract GPE number from name: %s "
389 "(name is not of form _Lxx or _Exx)", name));
390 return_ACPI_STATUS(AE_OK);
391 }
392
393 /* Ensure that we have a valid GPE number for this GPE block */
394
395 gpe_number = (u32)temp_gpe_number;
396 gpe_event_info =
397 acpi_ev_low_get_gpe_info(gpe_number, walk_info->gpe_block);
398 if (!gpe_event_info) {
399 /*
400 * This gpe_number is not valid for this GPE block, just ignore it.
401 * However, it may be valid for a different GPE block, since GPE0
402 * and GPE1 methods both appear under \_GPE.
403 */
404 return_ACPI_STATUS(AE_OK);
405 }
406
407 if ((ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) ==
408 ACPI_GPE_DISPATCH_HANDLER) ||
409 (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) ==
410 ACPI_GPE_DISPATCH_RAW_HANDLER)) {
411
412 /* If there is already a handler, ignore this GPE method */
413
414 return_ACPI_STATUS(AE_OK);
415 }
416
417 if (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) ==
418 ACPI_GPE_DISPATCH_METHOD) {
419 /*
420 * If there is already a method, ignore this method. But check
421 * for a type mismatch (if both the _Lxx AND _Exx exist)
422 */
423 if (type != (gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK)) {
424 ACPI_ERROR((AE_INFO,
425 "For GPE 0x%.2X, found both _L%2.2X and _E%2.2X methods",
426 gpe_number, gpe_number, gpe_number));
427 }
428 return_ACPI_STATUS(AE_OK);
429 }
430
431 /* Disable the GPE in case it's been enabled already. */
432
433 (void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
434
435 /*
436 * Add the GPE information from above to the gpe_event_info block for
437 * use during dispatch of this GPE.
438 */
439 gpe_event_info->flags &= ~(ACPI_GPE_DISPATCH_MASK);
440 gpe_event_info->flags |= (u8)(type | ACPI_GPE_DISPATCH_METHOD);
441 gpe_event_info->dispatch.method_node = method_node;
442
443 ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
444 "Registered GPE method %s as GPE number 0x%.2X\n",
445 name, gpe_number));
446 return_ACPI_STATUS(AE_OK);
447 }
448
449 #endif /* !ACPI_REDUCED_HARDWARE */
Linux with added FPC-III support