sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / acpi / acpica / rscalc.c
blobf1e83addd5b431c5522c1d9b9e20901ecd51b0b7
1 /*******************************************************************************
3 * Module Name: rscalc - Calculate stream and list lengths
5 ******************************************************************************/
7 /*
8 * Copyright (C) 2000 - 2016, Intel Corp.
9 * All rights reserved.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
44 #include <acpi/acpi.h>
45 #include "accommon.h"
46 #include "acresrc.h"
47 #include "acnamesp.h"
49 #define _COMPONENT ACPI_RESOURCES
50 ACPI_MODULE_NAME("rscalc")
52 /* Local prototypes */
53 static u8 acpi_rs_count_set_bits(u16 bit_field);
55 static acpi_rs_length
56 acpi_rs_struct_option_length(struct acpi_resource_source *resource_source);
58 static u32
59 acpi_rs_stream_option_length(u32 resource_length, u32 minimum_total_length);
61 /*******************************************************************************
63 * FUNCTION: acpi_rs_count_set_bits
65 * PARAMETERS: bit_field - Field in which to count bits
67 * RETURN: Number of bits set within the field
69 * DESCRIPTION: Count the number of bits set in a resource field. Used for
70 * (Short descriptor) interrupt and DMA lists.
72 ******************************************************************************/
74 static u8 acpi_rs_count_set_bits(u16 bit_field)
76 u8 bits_set;
78 ACPI_FUNCTION_ENTRY();
80 for (bits_set = 0; bit_field; bits_set++) {
82 /* Zero the least significant bit that is set */
84 bit_field &= (u16) (bit_field - 1);
87 return (bits_set);
90 /*******************************************************************************
92 * FUNCTION: acpi_rs_struct_option_length
94 * PARAMETERS: resource_source - Pointer to optional descriptor field
96 * RETURN: Status
98 * DESCRIPTION: Common code to handle optional resource_source_index and
99 * resource_source fields in some Large descriptors. Used during
100 * list-to-stream conversion
102 ******************************************************************************/
104 static acpi_rs_length
105 acpi_rs_struct_option_length(struct acpi_resource_source *resource_source)
107 ACPI_FUNCTION_ENTRY();
110 * If the resource_source string is valid, return the size of the string
111 * (string_length includes the NULL terminator) plus the size of the
112 * resource_source_index (1).
114 if (resource_source->string_ptr) {
115 return ((acpi_rs_length)(resource_source->string_length + 1));
118 return (0);
121 /*******************************************************************************
123 * FUNCTION: acpi_rs_stream_option_length
125 * PARAMETERS: resource_length - Length from the resource header
126 * minimum_total_length - Minimum length of this resource, before
127 * any optional fields. Includes header size
129 * RETURN: Length of optional string (0 if no string present)
131 * DESCRIPTION: Common code to handle optional resource_source_index and
132 * resource_source fields in some Large descriptors. Used during
133 * stream-to-list conversion
135 ******************************************************************************/
137 static u32
138 acpi_rs_stream_option_length(u32 resource_length,
139 u32 minimum_aml_resource_length)
141 u32 string_length = 0;
143 ACPI_FUNCTION_ENTRY();
146 * The resource_source_index and resource_source are optional elements of
147 * some Large-type resource descriptors.
151 * If the length of the actual resource descriptor is greater than the
152 * ACPI spec-defined minimum length, it means that a resource_source_index
153 * exists and is followed by a (required) null terminated string. The
154 * string length (including the null terminator) is the resource length
155 * minus the minimum length, minus one byte for the resource_source_index
156 * itself.
158 if (resource_length > minimum_aml_resource_length) {
160 /* Compute the length of the optional string */
162 string_length =
163 resource_length - minimum_aml_resource_length - 1;
167 * Round the length up to a multiple of the native word in order to
168 * guarantee that the entire resource descriptor is native word aligned
170 return ((u32) ACPI_ROUND_UP_TO_NATIVE_WORD(string_length));
173 /*******************************************************************************
175 * FUNCTION: acpi_rs_get_aml_length
177 * PARAMETERS: resource - Pointer to the resource linked list
178 * resource_list_size - Size of the resource linked list
179 * size_needed - Where the required size is returned
181 * RETURN: Status
183 * DESCRIPTION: Takes a linked list of internal resource descriptors and
184 * calculates the size buffer needed to hold the corresponding
185 * external resource byte stream.
187 ******************************************************************************/
189 acpi_status
190 acpi_rs_get_aml_length(struct acpi_resource *resource,
191 acpi_size resource_list_size, acpi_size *size_needed)
193 acpi_size aml_size_needed = 0;
194 struct acpi_resource *resource_end;
195 acpi_rs_length total_size;
197 ACPI_FUNCTION_TRACE(rs_get_aml_length);
199 /* Traverse entire list of internal resource descriptors */
201 resource_end =
202 ACPI_ADD_PTR(struct acpi_resource, resource, resource_list_size);
203 while (resource < resource_end) {
205 /* Validate the descriptor type */
207 if (resource->type > ACPI_RESOURCE_TYPE_MAX) {
208 return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
211 /* Sanity check the length. It must not be zero, or we loop forever */
213 if (!resource->length) {
214 return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH);
217 /* Get the base size of the (external stream) resource descriptor */
219 total_size = acpi_gbl_aml_resource_sizes[resource->type];
222 * Augment the base size for descriptors with optional and/or
223 * variable-length fields
225 switch (resource->type) {
226 case ACPI_RESOURCE_TYPE_IRQ:
228 /* Length can be 3 or 2 */
230 if (resource->data.irq.descriptor_length == 2) {
231 total_size--;
233 break;
235 case ACPI_RESOURCE_TYPE_START_DEPENDENT:
237 /* Length can be 1 or 0 */
239 if (resource->data.irq.descriptor_length == 0) {
240 total_size--;
242 break;
244 case ACPI_RESOURCE_TYPE_VENDOR:
246 * Vendor Defined Resource:
247 * For a Vendor Specific resource, if the Length is between 1 and 7
248 * it will be created as a Small Resource data type, otherwise it
249 * is a Large Resource data type.
251 if (resource->data.vendor.byte_length > 7) {
253 /* Base size of a Large resource descriptor */
255 total_size =
256 sizeof(struct aml_resource_large_header);
259 /* Add the size of the vendor-specific data */
261 total_size = (acpi_rs_length)
262 (total_size + resource->data.vendor.byte_length);
263 break;
265 case ACPI_RESOURCE_TYPE_END_TAG:
267 * End Tag:
268 * We are done -- return the accumulated total size.
270 *size_needed = aml_size_needed + total_size;
272 /* Normal exit */
274 return_ACPI_STATUS(AE_OK);
276 case ACPI_RESOURCE_TYPE_ADDRESS16:
278 * 16-Bit Address Resource:
279 * Add the size of the optional resource_source info
281 total_size = (acpi_rs_length)(total_size +
282 acpi_rs_struct_option_length
283 (&resource->data.
284 address16.
285 resource_source));
286 break;
288 case ACPI_RESOURCE_TYPE_ADDRESS32:
290 * 32-Bit Address Resource:
291 * Add the size of the optional resource_source info
293 total_size = (acpi_rs_length)(total_size +
294 acpi_rs_struct_option_length
295 (&resource->data.
296 address32.
297 resource_source));
298 break;
300 case ACPI_RESOURCE_TYPE_ADDRESS64:
302 * 64-Bit Address Resource:
303 * Add the size of the optional resource_source info
305 total_size = (acpi_rs_length)(total_size +
306 acpi_rs_struct_option_length
307 (&resource->data.
308 address64.
309 resource_source));
310 break;
312 case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
314 * Extended IRQ Resource:
315 * Add the size of each additional optional interrupt beyond the
316 * required 1 (4 bytes for each u32 interrupt number)
318 total_size = (acpi_rs_length)(total_size +
319 ((resource->data.
320 extended_irq.
321 interrupt_count -
322 1) * 4) +
323 /* Add the size of the optional resource_source info */
324 acpi_rs_struct_option_length
325 (&resource->data.
326 extended_irq.
327 resource_source));
328 break;
330 case ACPI_RESOURCE_TYPE_GPIO:
332 total_size = (acpi_rs_length)(total_size +
333 (resource->data.gpio.
334 pin_table_length * 2) +
335 resource->data.gpio.
336 resource_source.
337 string_length +
338 resource->data.gpio.
339 vendor_length);
341 break;
343 case ACPI_RESOURCE_TYPE_SERIAL_BUS:
345 total_size =
346 acpi_gbl_aml_resource_serial_bus_sizes[resource->
347 data.
348 common_serial_bus.
349 type];
351 total_size = (acpi_rs_length)(total_size +
352 resource->data.
353 i2c_serial_bus.
354 resource_source.
355 string_length +
356 resource->data.
357 i2c_serial_bus.
358 vendor_length);
360 break;
362 default:
364 break;
367 /* Update the total */
369 aml_size_needed += total_size;
371 /* Point to the next object */
373 resource =
374 ACPI_ADD_PTR(struct acpi_resource, resource,
375 resource->length);
378 /* Did not find an end_tag resource descriptor */
380 return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
383 /*******************************************************************************
385 * FUNCTION: acpi_rs_get_list_length
387 * PARAMETERS: aml_buffer - Pointer to the resource byte stream
388 * aml_buffer_length - Size of aml_buffer
389 * size_needed - Where the size needed is returned
391 * RETURN: Status
393 * DESCRIPTION: Takes an external resource byte stream and calculates the size
394 * buffer needed to hold the corresponding internal resource
395 * descriptor linked list.
397 ******************************************************************************/
399 acpi_status
400 acpi_rs_get_list_length(u8 *aml_buffer,
401 u32 aml_buffer_length, acpi_size *size_needed)
403 acpi_status status;
404 u8 *end_aml;
405 u8 *buffer;
406 u32 buffer_size;
407 u16 temp16;
408 u16 resource_length;
409 u32 extra_struct_bytes;
410 u8 resource_index;
411 u8 minimum_aml_resource_length;
412 union aml_resource *aml_resource;
414 ACPI_FUNCTION_TRACE(rs_get_list_length);
416 *size_needed = ACPI_RS_SIZE_MIN; /* Minimum size is one end_tag */
417 end_aml = aml_buffer + aml_buffer_length;
419 /* Walk the list of AML resource descriptors */
421 while (aml_buffer < end_aml) {
423 /* Validate the Resource Type and Resource Length */
425 status =
426 acpi_ut_validate_resource(NULL, aml_buffer,
427 &resource_index);
428 if (ACPI_FAILURE(status)) {
430 * Exit on failure. Cannot continue because the descriptor length
431 * may be bogus also.
433 return_ACPI_STATUS(status);
436 aml_resource = (void *)aml_buffer;
438 /* Get the resource length and base (minimum) AML size */
440 resource_length = acpi_ut_get_resource_length(aml_buffer);
441 minimum_aml_resource_length =
442 acpi_gbl_resource_aml_sizes[resource_index];
445 * Augment the size for descriptors with optional
446 * and/or variable length fields
448 extra_struct_bytes = 0;
449 buffer =
450 aml_buffer + acpi_ut_get_resource_header_length(aml_buffer);
452 switch (acpi_ut_get_resource_type(aml_buffer)) {
453 case ACPI_RESOURCE_NAME_IRQ:
455 * IRQ Resource:
456 * Get the number of bits set in the 16-bit IRQ mask
458 ACPI_MOVE_16_TO_16(&temp16, buffer);
459 extra_struct_bytes = acpi_rs_count_set_bits(temp16);
460 break;
462 case ACPI_RESOURCE_NAME_DMA:
464 * DMA Resource:
465 * Get the number of bits set in the 8-bit DMA mask
467 extra_struct_bytes = acpi_rs_count_set_bits(*buffer);
468 break;
470 case ACPI_RESOURCE_NAME_VENDOR_SMALL:
471 case ACPI_RESOURCE_NAME_VENDOR_LARGE:
473 * Vendor Resource:
474 * Get the number of vendor data bytes
476 extra_struct_bytes = resource_length;
479 * There is already one byte included in the minimum
480 * descriptor size. If there are extra struct bytes,
481 * subtract one from the count.
483 if (extra_struct_bytes) {
484 extra_struct_bytes--;
486 break;
488 case ACPI_RESOURCE_NAME_END_TAG:
490 * End Tag: This is the normal exit
492 return_ACPI_STATUS(AE_OK);
494 case ACPI_RESOURCE_NAME_ADDRESS32:
495 case ACPI_RESOURCE_NAME_ADDRESS16:
496 case ACPI_RESOURCE_NAME_ADDRESS64:
498 * Address Resource:
499 * Add the size of the optional resource_source
501 extra_struct_bytes =
502 acpi_rs_stream_option_length(resource_length,
503 minimum_aml_resource_length);
504 break;
506 case ACPI_RESOURCE_NAME_EXTENDED_IRQ:
508 * Extended IRQ Resource:
509 * Using the interrupt_table_length, add 4 bytes for each additional
510 * interrupt. Note: at least one interrupt is required and is
511 * included in the minimum descriptor size (reason for the -1)
513 extra_struct_bytes = (buffer[1] - 1) * sizeof(u32);
515 /* Add the size of the optional resource_source */
517 extra_struct_bytes +=
518 acpi_rs_stream_option_length(resource_length -
519 extra_struct_bytes,
520 minimum_aml_resource_length);
521 break;
523 case ACPI_RESOURCE_NAME_GPIO:
525 /* Vendor data is optional */
527 if (aml_resource->gpio.vendor_length) {
528 extra_struct_bytes +=
529 aml_resource->gpio.vendor_offset -
530 aml_resource->gpio.pin_table_offset +
531 aml_resource->gpio.vendor_length;
532 } else {
533 extra_struct_bytes +=
534 aml_resource->large_header.resource_length +
535 sizeof(struct aml_resource_large_header) -
536 aml_resource->gpio.pin_table_offset;
538 break;
540 case ACPI_RESOURCE_NAME_SERIAL_BUS:
542 minimum_aml_resource_length =
543 acpi_gbl_resource_aml_serial_bus_sizes
544 [aml_resource->common_serial_bus.type];
545 extra_struct_bytes +=
546 aml_resource->common_serial_bus.resource_length -
547 minimum_aml_resource_length;
548 break;
550 default:
552 break;
556 * Update the required buffer size for the internal descriptor structs
558 * Important: Round the size up for the appropriate alignment. This
559 * is a requirement on IA64.
561 if (acpi_ut_get_resource_type(aml_buffer) ==
562 ACPI_RESOURCE_NAME_SERIAL_BUS) {
563 buffer_size =
564 acpi_gbl_resource_struct_serial_bus_sizes
565 [aml_resource->common_serial_bus.type] +
566 extra_struct_bytes;
567 } else {
568 buffer_size =
569 acpi_gbl_resource_struct_sizes[resource_index] +
570 extra_struct_bytes;
573 buffer_size = (u32)ACPI_ROUND_UP_TO_NATIVE_WORD(buffer_size);
574 *size_needed += buffer_size;
576 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
577 "Type %.2X, AmlLength %.2X InternalLength %.2X\n",
578 acpi_ut_get_resource_type(aml_buffer),
579 acpi_ut_get_descriptor_length(aml_buffer),
580 buffer_size));
583 * Point to the next resource within the AML stream using the length
584 * contained in the resource descriptor header
586 aml_buffer += acpi_ut_get_descriptor_length(aml_buffer);
589 /* Did not find an end_tag resource descriptor */
591 return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
594 /*******************************************************************************
596 * FUNCTION: acpi_rs_get_pci_routing_table_length
598 * PARAMETERS: package_object - Pointer to the package object
599 * buffer_size_needed - u32 pointer of the size buffer
600 * needed to properly return the
601 * parsed data
603 * RETURN: Status
605 * DESCRIPTION: Given a package representing a PCI routing table, this
606 * calculates the size of the corresponding linked list of
607 * descriptions.
609 ******************************************************************************/
611 acpi_status
612 acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
613 acpi_size *buffer_size_needed)
615 u32 number_of_elements;
616 acpi_size temp_size_needed = 0;
617 union acpi_operand_object **top_object_list;
618 u32 index;
619 union acpi_operand_object *package_element;
620 union acpi_operand_object **sub_object_list;
621 u8 name_found;
622 u32 table_index;
624 ACPI_FUNCTION_TRACE(rs_get_pci_routing_table_length);
626 number_of_elements = package_object->package.count;
629 * Calculate the size of the return buffer.
630 * The base size is the number of elements * the sizes of the
631 * structures. Additional space for the strings is added below.
632 * The minus one is to subtract the size of the u8 Source[1]
633 * member because it is added below.
635 * But each PRT_ENTRY structure has a pointer to a string and
636 * the size of that string must be found.
638 top_object_list = package_object->package.elements;
640 for (index = 0; index < number_of_elements; index++) {
642 /* Dereference the subpackage */
644 package_element = *top_object_list;
646 /* We must have a valid Package object */
648 if (!package_element ||
649 (package_element->common.type != ACPI_TYPE_PACKAGE)) {
650 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
654 * The sub_object_list will now point to an array of the
655 * four IRQ elements: Address, Pin, Source and source_index
657 sub_object_list = package_element->package.elements;
659 /* Scan the irq_table_elements for the Source Name String */
661 name_found = FALSE;
663 for (table_index = 0;
664 table_index < package_element->package.count
665 && !name_found; table_index++) {
666 if (*sub_object_list && /* Null object allowed */
667 ((ACPI_TYPE_STRING ==
668 (*sub_object_list)->common.type) ||
669 ((ACPI_TYPE_LOCAL_REFERENCE ==
670 (*sub_object_list)->common.type) &&
671 ((*sub_object_list)->reference.class ==
672 ACPI_REFCLASS_NAME)))) {
673 name_found = TRUE;
674 } else {
675 /* Look at the next element */
677 sub_object_list++;
681 temp_size_needed += (sizeof(struct acpi_pci_routing_table) - 4);
683 /* Was a String type found? */
685 if (name_found) {
686 if ((*sub_object_list)->common.type == ACPI_TYPE_STRING) {
688 * The length String.Length field does not include the
689 * terminating NULL, add 1
691 temp_size_needed += ((acpi_size)
692 (*sub_object_list)->string.
693 length + 1);
694 } else {
695 temp_size_needed += acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
697 } else {
699 * If no name was found, then this is a NULL, which is
700 * translated as a u32 zero.
702 temp_size_needed += sizeof(u32);
705 /* Round up the size since each element must be aligned */
707 temp_size_needed = ACPI_ROUND_UP_TO_64BIT(temp_size_needed);
709 /* Point to the next union acpi_operand_object */
711 top_object_list++;
715 * Add an extra element to the end of the list, essentially a
716 * NULL terminator
718 *buffer_size_needed =
719 temp_size_needed + sizeof(struct acpi_pci_routing_table);
720 return_ACPI_STATUS(AE_OK);