drivers/ata/sata_sis.c

   1 /*
   2  *  sata_sis.c - Silicon Integrated Systems SATA
   3  *
   4  *  Maintained by:  Uwe Koziolek
   5  *                  Please ALWAYS copy linux-ide@vger.kernel.org
   6  *                  on emails.
   7  *
   8  *  Copyright 2004 Uwe Koziolek
   9  *
  10  *
  11  *  This program is free software; you can redistribute it and/or modify
  12  *  it under the terms of the GNU General Public License as published by
  13  *  the Free Software Foundation; either version 2, or (at your option)
  14  *  any later version.
  15  *
  16  *  This program is distributed in the hope that it will be useful,
  17  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *  GNU General Public License for more details.
  20  *
  21  *  You should have received a copy of the GNU General Public License
  22  *  along with this program; see the file COPYING.  If not, write to
  23  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  24  *
  25  *
  26  *  libata documentation is available via 'make {ps|pdf}docs',
  27  *  as Documentation/DocBook/libata.*
  28  *
  29  *  Hardware documentation available under NDA.
  30  *
  31  */
  32
  33 #include <linux/kernel.h>
  34 #include <linux/module.h>
  35 #include <linux/pci.h>
  36 #include <linux/blkdev.h>
  37 #include <linux/delay.h>
  38 #include <linux/interrupt.h>
  39 #include <linux/device.h>
  40 #include <scsi/scsi_host.h>
  41 #include <linux/libata.h>
  42 #include "sis.h"
  43
  44 #define DRV_NAME        "sata_sis"
  45 #define DRV_VERSION     "1.0"
  46
  47 enum {
  48         sis_180                 = 0,
  49         SIS_SCR_PCI_BAR         = 5,
  50
  51         /* PCI configuration registers */
  52         SIS_GENCTL              = 0x54, /* IDE General Control register */
  53         SIS_SCR_BASE            = 0xc0, /* sata0 phy SCR registers */
  54         SIS180_SATA1_OFS        = 0x10, /* offset from sata0->sata1 phy regs */
  55         SIS182_SATA1_OFS        = 0x20, /* offset from sata0->sata1 phy regs */
  56         SIS_PMR                 = 0x90, /* port mapping register */
  57         SIS_PMR_COMBINED        = 0x30,
  58
  59         /* random bits */
  60         SIS_FLAG_CFGSCR         = (1 << 30), /* host flag: SCRs via PCI cfg */
  61
  62         GENCTL_IOMAPPED_SCR     = (1 << 26), /* if set, SCRs are in IO space */
  63 };
  64
  65 static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
  66 static int sis_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
  67 static int sis_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
  68
  69 static const struct pci_device_id sis_pci_tbl[] = {
  70         { PCI_VDEVICE(SI, 0x0180), sis_180 },   /* SiS 964/180 */
  71         { PCI_VDEVICE(SI, 0x0181), sis_180 },   /* SiS 964/180 */
  72         { PCI_VDEVICE(SI, 0x0182), sis_180 },   /* SiS 965/965L */
  73         { PCI_VDEVICE(SI, 0x0183), sis_180 },   /* SiS 965/965L */
  74         { PCI_VDEVICE(SI, 0x1182), sis_180 },   /* SiS 966/680 */
  75         { PCI_VDEVICE(SI, 0x1183), sis_180 },   /* SiS 966/966L/968/680 */
  76
  77         { }     /* terminate list */
  78 };
  79
  80 static struct pci_driver sis_pci_driver = {
  81         .name                   = DRV_NAME,
  82         .id_table               = sis_pci_tbl,
  83         .probe                  = sis_init_one,
  84         .remove                 = ata_pci_remove_one,
  85 #ifdef CONFIG_PM_SLEEP
  86         .suspend                = ata_pci_device_suspend,
  87         .resume                 = ata_pci_device_resume,
  88 #endif
  89 };
  90
  91 static struct scsi_host_template sis_sht = {
  92         ATA_BMDMA_SHT(DRV_NAME),
  93 };
  94
  95 static struct ata_port_operations sis_ops = {
  96         .inherits               = &ata_bmdma_port_ops,
  97         .scr_read               = sis_scr_read,
  98         .scr_write              = sis_scr_write,
  99 };
 100
 101 static const struct ata_port_info sis_port_info = {
 102         .flags          = ATA_FLAG_SATA,
 103         .pio_mask       = ATA_PIO4,
 104         .mwdma_mask     = ATA_MWDMA2,
 105         .udma_mask      = ATA_UDMA6,
 106         .port_ops       = &sis_ops,
 107 };
 108
 109 MODULE_AUTHOR("Uwe Koziolek");
 110 MODULE_DESCRIPTION("low-level driver for Silicon Integrated Systems SATA controller");
 111 MODULE_LICENSE("GPL");
 112 MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
 113 MODULE_VERSION(DRV_VERSION);
 114
 115 static unsigned int get_scr_cfg_addr(struct ata_link *link, unsigned int sc_reg)
 116 {
 117         struct ata_port *ap = link->ap;
 118         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 119         unsigned int addr = SIS_SCR_BASE + (4 * sc_reg);
 120         u8 pmr;
 121
 122         if (ap->port_no)  {
 123                 switch (pdev->device) {
 124                 case 0x0180:
 125                 case 0x0181:
 126                         pci_read_config_byte(pdev, SIS_PMR, &pmr);
 127                         if ((pmr & SIS_PMR_COMBINED) == 0)
 128                                 addr += SIS180_SATA1_OFS;
 129                         break;
 130
 131                 case 0x0182:
 132                 case 0x0183:
 133                 case 0x1182:
 134                         addr += SIS182_SATA1_OFS;
 135                         break;
 136                 }
 137         }
 138         if (link->pmp)
 139                 addr += 0x10;
 140
 141         return addr;
 142 }
 143
 144 static u32 sis_scr_cfg_read(struct ata_link *link,
 145                             unsigned int sc_reg, u32 *val)
 146 {
 147         struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
 148         unsigned int cfg_addr = get_scr_cfg_addr(link, sc_reg);
 149
 150         if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */
 151                 return -EINVAL;
 152
 153         pci_read_config_dword(pdev, cfg_addr, val);
 154         return 0;
 155 }
 156
 157 static int sis_scr_cfg_write(struct ata_link *link,
 158                              unsigned int sc_reg, u32 val)
 159 {
 160         struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
 161         unsigned int cfg_addr = get_scr_cfg_addr(link, sc_reg);
 162
 163         pci_write_config_dword(pdev, cfg_addr, val);
 164         return 0;
 165 }
 166
 167 static int sis_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
 168 {
 169         struct ata_port *ap = link->ap;
 170         void __iomem *base = ap->ioaddr.scr_addr + link->pmp * 0x10;
 171
 172         if (sc_reg > SCR_CONTROL)
 173                 return -EINVAL;
 174
 175         if (ap->flags & SIS_FLAG_CFGSCR)
 176                 return sis_scr_cfg_read(link, sc_reg, val);
 177
 178         *val = ioread32(base + sc_reg * 4);
 179         return 0;
 180 }
 181
 182 static int sis_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
 183 {
 184         struct ata_port *ap = link->ap;
 185         void __iomem *base = ap->ioaddr.scr_addr + link->pmp * 0x10;
 186
 187         if (sc_reg > SCR_CONTROL)
 188                 return -EINVAL;
 189
 190         if (ap->flags & SIS_FLAG_CFGSCR)
 191                 return sis_scr_cfg_write(link, sc_reg, val);
 192
 193         iowrite32(val, base + (sc_reg * 4));
 194         return 0;
 195 }
 196
 197 static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 198 {
 199         struct ata_port_info pi = sis_port_info;
 200         const struct ata_port_info *ppi[] = { &pi, &pi };
 201         struct ata_host *host;
 202         u32 genctl, val;
 203         u8 pmr;
 204         u8 port2_start = 0x20;
 205         int i, rc;
 206
 207         ata_print_version_once(&pdev->dev, DRV_VERSION);
 208
 209         rc = pcim_enable_device(pdev);
 210         if (rc)
 211                 return rc;
 212
 213         /* check and see if the SCRs are in IO space or PCI cfg space */
 214         pci_read_config_dword(pdev, SIS_GENCTL, &genctl);
 215         if ((genctl & GENCTL_IOMAPPED_SCR) == 0)
 216                 pi.flags |= SIS_FLAG_CFGSCR;
 217
 218         /* if hardware thinks SCRs are in IO space, but there are
 219          * no IO resources assigned, change to PCI cfg space.
 220          */
 221         if ((!(pi.flags & SIS_FLAG_CFGSCR)) &&
 222             ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) ||
 223              (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) {
 224                 genctl &= ~GENCTL_IOMAPPED_SCR;
 225                 pci_write_config_dword(pdev, SIS_GENCTL, genctl);
 226                 pi.flags |= SIS_FLAG_CFGSCR;
 227         }
 228
 229         pci_read_config_byte(pdev, SIS_PMR, &pmr);
 230         switch (ent->device) {
 231         case 0x0180:
 232         case 0x0181:
 233
 234                 /* The PATA-handling is provided by pata_sis */
 235                 switch (pmr & 0x30) {
 236                 case 0x10:
 237                         ppi[1] = &sis_info133_for_sata;
 238                         break;
 239
 240                 case 0x30:
 241                         ppi[0] = &sis_info133_for_sata;
 242                         break;
 243                 }
 244                 if ((pmr & SIS_PMR_COMBINED) == 0) {
 245                         dev_info(&pdev->dev,
 246                                  "Detected SiS 180/181/964 chipset in SATA mode\n");
 247                         port2_start = 64;
 248                 } else {
 249                         dev_info(&pdev->dev,
 250                                  "Detected SiS 180/181 chipset in combined mode\n");
 251                         port2_start = 0;
 252                         pi.flags |= ATA_FLAG_SLAVE_POSS;
 253                 }
 254                 break;
 255
 256         case 0x0182:
 257         case 0x0183:
 258                 pci_read_config_dword(pdev, 0x6C, &val);
 259                 if (val & (1L << 31)) {
 260                         dev_info(&pdev->dev, "Detected SiS 182/965 chipset\n");
 261                         pi.flags |= ATA_FLAG_SLAVE_POSS;
 262                 } else {
 263                         dev_info(&pdev->dev, "Detected SiS 182/965L chipset\n");
 264                 }
 265                 break;
 266
 267         case 0x1182:
 268                 dev_info(&pdev->dev,
 269                          "Detected SiS 1182/966/680 SATA controller\n");
 270                 pi.flags |= ATA_FLAG_SLAVE_POSS;
 271                 break;
 272
 273         case 0x1183:
 274                 dev_info(&pdev->dev,
 275                          "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n");
 276                 ppi[0] = &sis_info133_for_sata;
 277                 ppi[1] = &sis_info133_for_sata;
 278                 break;
 279         }
 280
 281         rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 282         if (rc)
 283                 return rc;
 284
 285         for (i = 0; i < 2; i++) {
 286                 struct ata_port *ap = host->ports[i];
 287
 288                 if (ap->flags & ATA_FLAG_SATA &&
 289                     ap->flags & ATA_FLAG_SLAVE_POSS) {
 290                         rc = ata_slave_link_init(ap);
 291                         if (rc)
 292                                 return rc;
 293                 }
 294         }
 295
 296         if (!(pi.flags & SIS_FLAG_CFGSCR)) {
 297                 void __iomem *mmio;
 298
 299                 rc = pcim_iomap_regions(pdev, 1 << SIS_SCR_PCI_BAR, DRV_NAME);
 300                 if (rc)
 301                         return rc;
 302                 mmio = host->iomap[SIS_SCR_PCI_BAR];
 303
 304                 host->ports[0]->ioaddr.scr_addr = mmio;
 305                 host->ports[1]->ioaddr.scr_addr = mmio + port2_start;
 306         }
 307
 308         pci_set_master(pdev);
 309         pci_intx(pdev, 1);
 310         return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
 311                                  IRQF_SHARED, &sis_sht);
 312 }
 313
 314 module_pci_driver(sis_pci_driver);