drivers/edac/i82860_edac.c

   1 /*
   2  * Intel 82860 Memory Controller kernel module
   3  * (C) 2005 Red Hat (http://www.redhat.com)
   4  * This file may be distributed under the terms of the
   5  * GNU General Public License.
   6  *
   7  * Written by Ben Woodard <woodard@redhat.com>
   8  * shamelessly copied from and based upon the edac_i82875 driver
   9  * by Thayne Harbaugh of Linux Networx. (http://lnxi.com)
  10  */
  11
  12 #include <linux/module.h>
  13 #include <linux/init.h>
  14 #include <linux/pci.h>
  15 #include <linux/pci_ids.h>
  16 #include <linux/edac.h>
  17 #include "edac_module.h"
  18
  19 #define  I82860_REVISION " Ver: 2.0.2"
  20 #define EDAC_MOD_STR    "i82860_edac"
  21
  22 #define i82860_printk(level, fmt, arg...) \
  23         edac_printk(level, "i82860", fmt, ##arg)
  24
  25 #define i82860_mc_printk(mci, level, fmt, arg...) \
  26         edac_mc_chipset_printk(mci, level, "i82860", fmt, ##arg)
  27
  28 #ifndef PCI_DEVICE_ID_INTEL_82860_0
  29 #define PCI_DEVICE_ID_INTEL_82860_0     0x2531
  30 #endif                          /* PCI_DEVICE_ID_INTEL_82860_0 */
  31
  32 #define I82860_MCHCFG 0x50
  33 #define I82860_GBA 0x60
  34 #define I82860_GBA_MASK 0x7FF
  35 #define I82860_GBA_SHIFT 24
  36 #define I82860_ERRSTS 0xC8
  37 #define I82860_EAP 0xE4
  38 #define I82860_DERRCTL_STS 0xE2
  39
  40 enum i82860_chips {
  41         I82860 = 0,
  42 };
  43
  44 struct i82860_dev_info {
  45         const char *ctl_name;
  46 };
  47
  48 struct i82860_error_info {
  49         u16 errsts;
  50         u32 eap;
  51         u16 derrsyn;
  52         u16 errsts2;
  53 };
  54
  55 static const struct i82860_dev_info i82860_devs[] = {
  56         [I82860] = {
  57                 .ctl_name = "i82860"},
  58 };
  59
  60 static struct pci_dev *mci_pdev;        /* init dev: in case that AGP code
  61                                          * has already registered driver
  62                                          */
  63 static struct edac_pci_ctl_info *i82860_pci;
  64
  65 static void i82860_get_error_info(struct mem_ctl_info *mci,
  66                                 struct i82860_error_info *info)
  67 {
  68         struct pci_dev *pdev;
  69
  70         pdev = to_pci_dev(mci->pdev);
  71
  72         /*
  73          * This is a mess because there is no atomic way to read all the
  74          * registers at once and the registers can transition from CE being
  75          * overwritten by UE.
  76          */
  77         pci_read_config_word(pdev, I82860_ERRSTS, &info->errsts);
  78         pci_read_config_dword(pdev, I82860_EAP, &info->eap);
  79         pci_read_config_word(pdev, I82860_DERRCTL_STS, &info->derrsyn);
  80         pci_read_config_word(pdev, I82860_ERRSTS, &info->errsts2);
  81
  82         pci_write_bits16(pdev, I82860_ERRSTS, 0x0003, 0x0003);
  83
  84         /*
  85          * If the error is the same for both reads then the first set of reads
  86          * is valid.  If there is a change then there is a CE no info and the
  87          * second set of reads is valid and should be UE info.
  88          */
  89         if (!(info->errsts2 & 0x0003))
  90                 return;
  91
  92         if ((info->errsts ^ info->errsts2) & 0x0003) {
  93                 pci_read_config_dword(pdev, I82860_EAP, &info->eap);
  94                 pci_read_config_word(pdev, I82860_DERRCTL_STS, &info->derrsyn);
  95         }
  96 }
  97
  98 static int i82860_process_error_info(struct mem_ctl_info *mci,
  99                                 struct i82860_error_info *info,
 100                                 int handle_errors)
 101 {
 102         struct dimm_info *dimm;
 103         int row;
 104
 105         if (!(info->errsts2 & 0x0003))
 106                 return 0;
 107
 108         if (!handle_errors)
 109                 return 1;
 110
 111         if ((info->errsts ^ info->errsts2) & 0x0003) {
 112                 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
 113                                      -1, -1, -1, "UE overwrote CE", "");
 114                 info->errsts = info->errsts2;
 115         }
 116
 117         info->eap >>= PAGE_SHIFT;
 118         row = edac_mc_find_csrow_by_page(mci, info->eap);
 119         dimm = mci->csrows[row]->channels[0]->dimm;
 120
 121         if (info->errsts & 0x0002)
 122                 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
 123                                      info->eap, 0, 0,
 124                                      dimm->location[0], dimm->location[1], -1,
 125                                      "i82860 UE", "");
 126         else
 127                 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
 128                                      info->eap, 0, info->derrsyn,
 129                                      dimm->location[0], dimm->location[1], -1,
 130                                      "i82860 CE", "");
 131
 132         return 1;
 133 }
 134
 135 static void i82860_check(struct mem_ctl_info *mci)
 136 {
 137         struct i82860_error_info info;
 138
 139         edac_dbg(1, "MC%d\n", mci->mc_idx);
 140         i82860_get_error_info(mci, &info);
 141         i82860_process_error_info(mci, &info, 1);
 142 }
 143
 144 static void i82860_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev)
 145 {
 146         unsigned long last_cumul_size;
 147         u16 mchcfg_ddim;        /* DRAM Data Integrity Mode 0=none, 2=edac */
 148         u16 value;
 149         u32 cumul_size;
 150         struct csrow_info *csrow;
 151         struct dimm_info *dimm;
 152         int index;
 153
 154         pci_read_config_word(pdev, I82860_MCHCFG, &mchcfg_ddim);
 155         mchcfg_ddim = mchcfg_ddim & 0x180;
 156         last_cumul_size = 0;
 157
 158         /* The group row boundary (GRA) reg values are boundary address
 159          * for each DRAM row with a granularity of 16MB.  GRA regs are
 160          * cumulative; therefore GRA15 will contain the total memory contained
 161          * in all eight rows.
 162          */
 163         for (index = 0; index < mci->nr_csrows; index++) {
 164                 csrow = mci->csrows[index];
 165                 dimm = csrow->channels[0]->dimm;
 166
 167                 pci_read_config_word(pdev, I82860_GBA + index * 2, &value);
 168                 cumul_size = (value & I82860_GBA_MASK) <<
 169                         (I82860_GBA_SHIFT - PAGE_SHIFT);
 170                 edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size);
 171
 172                 if (cumul_size == last_cumul_size)
 173                         continue;       /* not populated */
 174
 175                 csrow->first_page = last_cumul_size;
 176                 csrow->last_page = cumul_size - 1;
 177                 dimm->nr_pages = cumul_size - last_cumul_size;
 178                 last_cumul_size = cumul_size;
 179                 dimm->grain = 1 << 12;  /* I82860_EAP has 4KiB reolution */
 180                 dimm->mtype = MEM_RMBS;
 181                 dimm->dtype = DEV_UNKNOWN;
 182                 dimm->edac_mode = mchcfg_ddim ? EDAC_SECDED : EDAC_NONE;
 183         }
 184 }
 185
 186 static int i82860_probe1(struct pci_dev *pdev, int dev_idx)
 187 {
 188         struct mem_ctl_info *mci;
 189         struct edac_mc_layer layers[2];
 190         struct i82860_error_info discard;
 191
 192         /*
 193          * RDRAM has channels but these don't map onto the csrow abstraction.
 194          * According with the datasheet, there are 2 Rambus channels, supporting
 195          * up to 16 direct RDRAM devices.
 196          * The device groups from the GRA registers seem to map reasonably
 197          * well onto the notion of a chip select row.
 198          * There are 16 GRA registers and since the name is associated with
 199          * the channel and the GRA registers map to physical devices so we are
 200          * going to make 1 channel for group.
 201          */
 202         layers[0].type = EDAC_MC_LAYER_CHANNEL;
 203         layers[0].size = 2;
 204         layers[0].is_virt_csrow = true;
 205         layers[1].type = EDAC_MC_LAYER_SLOT;
 206         layers[1].size = 8;
 207         layers[1].is_virt_csrow = true;
 208         mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
 209         if (!mci)
 210                 return -ENOMEM;
 211
 212         edac_dbg(3, "init mci\n");
 213         mci->pdev = &pdev->dev;
 214         mci->mtype_cap = MEM_FLAG_DDR;
 215         mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
 216         /* I"m not sure about this but I think that all RDRAM is SECDED */
 217         mci->edac_cap = EDAC_FLAG_SECDED;
 218         mci->mod_name = EDAC_MOD_STR;
 219         mci->mod_ver = I82860_REVISION;
 220         mci->ctl_name = i82860_devs[dev_idx].ctl_name;
 221         mci->dev_name = pci_name(pdev);
 222         mci->edac_check = i82860_check;
 223         mci->ctl_page_to_phys = NULL;
 224         i82860_init_csrows(mci, pdev);
 225         i82860_get_error_info(mci, &discard);   /* clear counters */
 226
 227         /* Here we assume that we will never see multiple instances of this
 228          * type of memory controller.  The ID is therefore hardcoded to 0.
 229          */
 230         if (edac_mc_add_mc(mci)) {
 231                 edac_dbg(3, "failed edac_mc_add_mc()\n");
 232                 goto fail;
 233         }
 234
 235         /* allocating generic PCI control info */
 236         i82860_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
 237         if (!i82860_pci) {
 238                 printk(KERN_WARNING
 239                         "%s(): Unable to create PCI control\n",
 240                         __func__);
 241                 printk(KERN_WARNING
 242                         "%s(): PCI error report via EDAC not setup\n",
 243                         __func__);
 244         }
 245
 246         /* get this far and it's successful */
 247         edac_dbg(3, "success\n");
 248
 249         return 0;
 250
 251 fail:
 252         edac_mc_free(mci);
 253         return -ENODEV;
 254 }
 255
 256 /* returns count (>= 0), or negative on error */
 257 static int i82860_init_one(struct pci_dev *pdev,
 258                            const struct pci_device_id *ent)
 259 {
 260         int rc;
 261
 262         edac_dbg(0, "\n");
 263         i82860_printk(KERN_INFO, "i82860 init one\n");
 264
 265         if (pci_enable_device(pdev) < 0)
 266                 return -EIO;
 267
 268         rc = i82860_probe1(pdev, ent->driver_data);
 269
 270         if (rc == 0)
 271                 mci_pdev = pci_dev_get(pdev);
 272
 273         return rc;
 274 }
 275
 276 static void i82860_remove_one(struct pci_dev *pdev)
 277 {
 278         struct mem_ctl_info *mci;
 279
 280         edac_dbg(0, "\n");
 281
 282         if (i82860_pci)
 283                 edac_pci_release_generic_ctl(i82860_pci);
 284
 285         if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
 286                 return;
 287
 288         edac_mc_free(mci);
 289 }
 290
 291 static const struct pci_device_id i82860_pci_tbl[] = {
 292         {
 293          PCI_VEND_DEV(INTEL, 82860_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 294          I82860},
 295         {
 296          0,
 297          }                      /* 0 terminated list. */
 298 };
 299
 300 MODULE_DEVICE_TABLE(pci, i82860_pci_tbl);
 301
 302 static struct pci_driver i82860_driver = {
 303         .name = EDAC_MOD_STR,
 304         .probe = i82860_init_one,
 305         .remove = i82860_remove_one,
 306         .id_table = i82860_pci_tbl,
 307 };
 308
 309 static int __init i82860_init(void)
 310 {
 311         int pci_rc;
 312
 313         edac_dbg(3, "\n");
 314
 315        /* Ensure that the OPSTATE is set correctly for POLL or NMI */
 316        opstate_init();
 317
 318         if ((pci_rc = pci_register_driver(&i82860_driver)) < 0)
 319                 goto fail0;
 320
 321         if (!mci_pdev) {
 322                 mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
 323                                         PCI_DEVICE_ID_INTEL_82860_0, NULL);
 324
 325                 if (mci_pdev == NULL) {
 326                         edac_dbg(0, "860 pci_get_device fail\n");
 327                         pci_rc = -ENODEV;
 328                         goto fail1;
 329                 }
 330
 331                 pci_rc = i82860_init_one(mci_pdev, i82860_pci_tbl);
 332
 333                 if (pci_rc < 0) {
 334                         edac_dbg(0, "860 init fail\n");
 335                         pci_rc = -ENODEV;
 336                         goto fail1;
 337                 }
 338         }
 339
 340         return 0;
 341
 342 fail1:
 343         pci_unregister_driver(&i82860_driver);
 344
 345 fail0:
 346         pci_dev_put(mci_pdev);
 347         return pci_rc;
 348 }
 349
 350 static void __exit i82860_exit(void)
 351 {
 352         edac_dbg(3, "\n");
 353         pci_unregister_driver(&i82860_driver);
 354         pci_dev_put(mci_pdev);
 355 }
 356
 357 module_init(i82860_init);
 358 module_exit(i82860_exit);
 359
 360 MODULE_LICENSE("GPL");
 361 MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com) "
 362                 "Ben Woodard <woodard@redhat.com>");
 363 MODULE_DESCRIPTION("ECC support for Intel 82860 memory hub controllers");
 364
 365 module_param(edac_op_state, int, 0444);
 366 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");