sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / hwmon / pmbus / pmbus.h
blobbfcb13bae34bd67338e363d8b76849572d39f7d6
1 /*
2 * pmbus.h - Common defines and structures for PMBus devices
4 * Copyright (c) 2010, 2011 Ericsson AB.
5 * Copyright (c) 2012 Guenter Roeck
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 #ifndef PMBUS_H
23 #define PMBUS_H
25 #include <linux/bitops.h>
26 #include <linux/regulator/driver.h>
29 * Registers
31 enum pmbus_regs {
32 PMBUS_PAGE = 0x00,
33 PMBUS_OPERATION = 0x01,
34 PMBUS_ON_OFF_CONFIG = 0x02,
35 PMBUS_CLEAR_FAULTS = 0x03,
36 PMBUS_PHASE = 0x04,
38 PMBUS_CAPABILITY = 0x19,
39 PMBUS_QUERY = 0x1A,
41 PMBUS_VOUT_MODE = 0x20,
42 PMBUS_VOUT_COMMAND = 0x21,
43 PMBUS_VOUT_TRIM = 0x22,
44 PMBUS_VOUT_CAL_OFFSET = 0x23,
45 PMBUS_VOUT_MAX = 0x24,
46 PMBUS_VOUT_MARGIN_HIGH = 0x25,
47 PMBUS_VOUT_MARGIN_LOW = 0x26,
48 PMBUS_VOUT_TRANSITION_RATE = 0x27,
49 PMBUS_VOUT_DROOP = 0x28,
50 PMBUS_VOUT_SCALE_LOOP = 0x29,
51 PMBUS_VOUT_SCALE_MONITOR = 0x2A,
53 PMBUS_COEFFICIENTS = 0x30,
54 PMBUS_POUT_MAX = 0x31,
56 PMBUS_FAN_CONFIG_12 = 0x3A,
57 PMBUS_FAN_COMMAND_1 = 0x3B,
58 PMBUS_FAN_COMMAND_2 = 0x3C,
59 PMBUS_FAN_CONFIG_34 = 0x3D,
60 PMBUS_FAN_COMMAND_3 = 0x3E,
61 PMBUS_FAN_COMMAND_4 = 0x3F,
63 PMBUS_VOUT_OV_FAULT_LIMIT = 0x40,
64 PMBUS_VOUT_OV_FAULT_RESPONSE = 0x41,
65 PMBUS_VOUT_OV_WARN_LIMIT = 0x42,
66 PMBUS_VOUT_UV_WARN_LIMIT = 0x43,
67 PMBUS_VOUT_UV_FAULT_LIMIT = 0x44,
68 PMBUS_VOUT_UV_FAULT_RESPONSE = 0x45,
69 PMBUS_IOUT_OC_FAULT_LIMIT = 0x46,
70 PMBUS_IOUT_OC_FAULT_RESPONSE = 0x47,
71 PMBUS_IOUT_OC_LV_FAULT_LIMIT = 0x48,
72 PMBUS_IOUT_OC_LV_FAULT_RESPONSE = 0x49,
73 PMBUS_IOUT_OC_WARN_LIMIT = 0x4A,
74 PMBUS_IOUT_UC_FAULT_LIMIT = 0x4B,
75 PMBUS_IOUT_UC_FAULT_RESPONSE = 0x4C,
77 PMBUS_OT_FAULT_LIMIT = 0x4F,
78 PMBUS_OT_FAULT_RESPONSE = 0x50,
79 PMBUS_OT_WARN_LIMIT = 0x51,
80 PMBUS_UT_WARN_LIMIT = 0x52,
81 PMBUS_UT_FAULT_LIMIT = 0x53,
82 PMBUS_UT_FAULT_RESPONSE = 0x54,
83 PMBUS_VIN_OV_FAULT_LIMIT = 0x55,
84 PMBUS_VIN_OV_FAULT_RESPONSE = 0x56,
85 PMBUS_VIN_OV_WARN_LIMIT = 0x57,
86 PMBUS_VIN_UV_WARN_LIMIT = 0x58,
87 PMBUS_VIN_UV_FAULT_LIMIT = 0x59,
89 PMBUS_IIN_OC_FAULT_LIMIT = 0x5B,
90 PMBUS_IIN_OC_WARN_LIMIT = 0x5D,
92 PMBUS_POUT_OP_FAULT_LIMIT = 0x68,
93 PMBUS_POUT_OP_WARN_LIMIT = 0x6A,
94 PMBUS_PIN_OP_WARN_LIMIT = 0x6B,
96 PMBUS_STATUS_BYTE = 0x78,
97 PMBUS_STATUS_WORD = 0x79,
98 PMBUS_STATUS_VOUT = 0x7A,
99 PMBUS_STATUS_IOUT = 0x7B,
100 PMBUS_STATUS_INPUT = 0x7C,
101 PMBUS_STATUS_TEMPERATURE = 0x7D,
102 PMBUS_STATUS_CML = 0x7E,
103 PMBUS_STATUS_OTHER = 0x7F,
104 PMBUS_STATUS_MFR_SPECIFIC = 0x80,
105 PMBUS_STATUS_FAN_12 = 0x81,
106 PMBUS_STATUS_FAN_34 = 0x82,
108 PMBUS_READ_VIN = 0x88,
109 PMBUS_READ_IIN = 0x89,
110 PMBUS_READ_VCAP = 0x8A,
111 PMBUS_READ_VOUT = 0x8B,
112 PMBUS_READ_IOUT = 0x8C,
113 PMBUS_READ_TEMPERATURE_1 = 0x8D,
114 PMBUS_READ_TEMPERATURE_2 = 0x8E,
115 PMBUS_READ_TEMPERATURE_3 = 0x8F,
116 PMBUS_READ_FAN_SPEED_1 = 0x90,
117 PMBUS_READ_FAN_SPEED_2 = 0x91,
118 PMBUS_READ_FAN_SPEED_3 = 0x92,
119 PMBUS_READ_FAN_SPEED_4 = 0x93,
120 PMBUS_READ_DUTY_CYCLE = 0x94,
121 PMBUS_READ_FREQUENCY = 0x95,
122 PMBUS_READ_POUT = 0x96,
123 PMBUS_READ_PIN = 0x97,
125 PMBUS_REVISION = 0x98,
126 PMBUS_MFR_ID = 0x99,
127 PMBUS_MFR_MODEL = 0x9A,
128 PMBUS_MFR_REVISION = 0x9B,
129 PMBUS_MFR_LOCATION = 0x9C,
130 PMBUS_MFR_DATE = 0x9D,
131 PMBUS_MFR_SERIAL = 0x9E,
134 * Virtual registers.
135 * Useful to support attributes which are not supported by standard PMBus
136 * registers but exist as manufacturer specific registers on individual chips.
137 * Must be mapped to real registers in device specific code.
139 * Semantics:
140 * Virtual registers are all word size.
141 * READ registers are read-only; writes are either ignored or return an error.
142 * RESET registers are read/write. Reading reset registers returns zero
143 * (used for detection), writing any value causes the associated history to be
144 * reset.
145 * Virtual registers have to be handled in device specific driver code. Chip
146 * driver code returns non-negative register values if a virtual register is
147 * supported, or a negative error code if not. The chip driver may return
148 * -ENODATA or any other error code in this case, though an error code other
149 * than -ENODATA is handled more efficiently and thus preferred. Either case,
150 * the calling PMBus core code will abort if the chip driver returns an error
151 * code when reading or writing virtual registers.
153 PMBUS_VIRT_BASE = 0x100,
154 PMBUS_VIRT_READ_TEMP_AVG,
155 PMBUS_VIRT_READ_TEMP_MIN,
156 PMBUS_VIRT_READ_TEMP_MAX,
157 PMBUS_VIRT_RESET_TEMP_HISTORY,
158 PMBUS_VIRT_READ_VIN_AVG,
159 PMBUS_VIRT_READ_VIN_MIN,
160 PMBUS_VIRT_READ_VIN_MAX,
161 PMBUS_VIRT_RESET_VIN_HISTORY,
162 PMBUS_VIRT_READ_IIN_AVG,
163 PMBUS_VIRT_READ_IIN_MIN,
164 PMBUS_VIRT_READ_IIN_MAX,
165 PMBUS_VIRT_RESET_IIN_HISTORY,
166 PMBUS_VIRT_READ_PIN_AVG,
167 PMBUS_VIRT_READ_PIN_MIN,
168 PMBUS_VIRT_READ_PIN_MAX,
169 PMBUS_VIRT_RESET_PIN_HISTORY,
170 PMBUS_VIRT_READ_POUT_AVG,
171 PMBUS_VIRT_READ_POUT_MIN,
172 PMBUS_VIRT_READ_POUT_MAX,
173 PMBUS_VIRT_RESET_POUT_HISTORY,
174 PMBUS_VIRT_READ_VOUT_AVG,
175 PMBUS_VIRT_READ_VOUT_MIN,
176 PMBUS_VIRT_READ_VOUT_MAX,
177 PMBUS_VIRT_RESET_VOUT_HISTORY,
178 PMBUS_VIRT_READ_IOUT_AVG,
179 PMBUS_VIRT_READ_IOUT_MIN,
180 PMBUS_VIRT_READ_IOUT_MAX,
181 PMBUS_VIRT_RESET_IOUT_HISTORY,
182 PMBUS_VIRT_READ_TEMP2_AVG,
183 PMBUS_VIRT_READ_TEMP2_MIN,
184 PMBUS_VIRT_READ_TEMP2_MAX,
185 PMBUS_VIRT_RESET_TEMP2_HISTORY,
187 PMBUS_VIRT_READ_VMON,
188 PMBUS_VIRT_VMON_UV_WARN_LIMIT,
189 PMBUS_VIRT_VMON_OV_WARN_LIMIT,
190 PMBUS_VIRT_VMON_UV_FAULT_LIMIT,
191 PMBUS_VIRT_VMON_OV_FAULT_LIMIT,
192 PMBUS_VIRT_STATUS_VMON,
196 * OPERATION
198 #define PB_OPERATION_CONTROL_ON BIT(7)
201 * CAPABILITY
203 #define PB_CAPABILITY_SMBALERT BIT(4)
204 #define PB_CAPABILITY_ERROR_CHECK BIT(7)
207 * VOUT_MODE
209 #define PB_VOUT_MODE_MODE_MASK 0xe0
210 #define PB_VOUT_MODE_PARAM_MASK 0x1f
212 #define PB_VOUT_MODE_LINEAR 0x00
213 #define PB_VOUT_MODE_VID 0x20
214 #define PB_VOUT_MODE_DIRECT 0x40
217 * Fan configuration
219 #define PB_FAN_2_PULSE_MASK (BIT(0) | BIT(1))
220 #define PB_FAN_2_RPM BIT(2)
221 #define PB_FAN_2_INSTALLED BIT(3)
222 #define PB_FAN_1_PULSE_MASK (BIT(4) | BIT(5))
223 #define PB_FAN_1_RPM BIT(6)
224 #define PB_FAN_1_INSTALLED BIT(7)
227 * STATUS_BYTE, STATUS_WORD (lower)
229 #define PB_STATUS_NONE_ABOVE BIT(0)
230 #define PB_STATUS_CML BIT(1)
231 #define PB_STATUS_TEMPERATURE BIT(2)
232 #define PB_STATUS_VIN_UV BIT(3)
233 #define PB_STATUS_IOUT_OC BIT(4)
234 #define PB_STATUS_VOUT_OV BIT(5)
235 #define PB_STATUS_OFF BIT(6)
236 #define PB_STATUS_BUSY BIT(7)
239 * STATUS_WORD (upper)
241 #define PB_STATUS_UNKNOWN BIT(8)
242 #define PB_STATUS_OTHER BIT(9)
243 #define PB_STATUS_FANS BIT(10)
244 #define PB_STATUS_POWER_GOOD_N BIT(11)
245 #define PB_STATUS_WORD_MFR BIT(12)
246 #define PB_STATUS_INPUT BIT(13)
247 #define PB_STATUS_IOUT_POUT BIT(14)
248 #define PB_STATUS_VOUT BIT(15)
251 * STATUS_IOUT
253 #define PB_POUT_OP_WARNING BIT(0)
254 #define PB_POUT_OP_FAULT BIT(1)
255 #define PB_POWER_LIMITING BIT(2)
256 #define PB_CURRENT_SHARE_FAULT BIT(3)
257 #define PB_IOUT_UC_FAULT BIT(4)
258 #define PB_IOUT_OC_WARNING BIT(5)
259 #define PB_IOUT_OC_LV_FAULT BIT(6)
260 #define PB_IOUT_OC_FAULT BIT(7)
263 * STATUS_VOUT, STATUS_INPUT
265 #define PB_VOLTAGE_UV_FAULT BIT(4)
266 #define PB_VOLTAGE_UV_WARNING BIT(5)
267 #define PB_VOLTAGE_OV_WARNING BIT(6)
268 #define PB_VOLTAGE_OV_FAULT BIT(7)
271 * STATUS_INPUT
273 #define PB_PIN_OP_WARNING BIT(0)
274 #define PB_IIN_OC_WARNING BIT(1)
275 #define PB_IIN_OC_FAULT BIT(2)
278 * STATUS_TEMPERATURE
280 #define PB_TEMP_UT_FAULT BIT(4)
281 #define PB_TEMP_UT_WARNING BIT(5)
282 #define PB_TEMP_OT_WARNING BIT(6)
283 #define PB_TEMP_OT_FAULT BIT(7)
286 * STATUS_FAN
288 #define PB_FAN_AIRFLOW_WARNING BIT(0)
289 #define PB_FAN_AIRFLOW_FAULT BIT(1)
290 #define PB_FAN_FAN2_SPEED_OVERRIDE BIT(2)
291 #define PB_FAN_FAN1_SPEED_OVERRIDE BIT(3)
292 #define PB_FAN_FAN2_WARNING BIT(4)
293 #define PB_FAN_FAN1_WARNING BIT(5)
294 #define PB_FAN_FAN2_FAULT BIT(6)
295 #define PB_FAN_FAN1_FAULT BIT(7)
298 * CML_FAULT_STATUS
300 #define PB_CML_FAULT_OTHER_MEM_LOGIC BIT(0)
301 #define PB_CML_FAULT_OTHER_COMM BIT(1)
302 #define PB_CML_FAULT_PROCESSOR BIT(3)
303 #define PB_CML_FAULT_MEMORY BIT(4)
304 #define PB_CML_FAULT_PACKET_ERROR BIT(5)
305 #define PB_CML_FAULT_INVALID_DATA BIT(6)
306 #define PB_CML_FAULT_INVALID_COMMAND BIT(7)
308 enum pmbus_sensor_classes {
309 PSC_VOLTAGE_IN = 0,
310 PSC_VOLTAGE_OUT,
311 PSC_CURRENT_IN,
312 PSC_CURRENT_OUT,
313 PSC_POWER,
314 PSC_TEMPERATURE,
315 PSC_FAN,
316 PSC_NUM_CLASSES /* Number of power sensor classes */
319 #define PMBUS_PAGES 32 /* Per PMBus specification */
321 /* Functionality bit mask */
322 #define PMBUS_HAVE_VIN BIT(0)
323 #define PMBUS_HAVE_VCAP BIT(1)
324 #define PMBUS_HAVE_VOUT BIT(2)
325 #define PMBUS_HAVE_IIN BIT(3)
326 #define PMBUS_HAVE_IOUT BIT(4)
327 #define PMBUS_HAVE_PIN BIT(5)
328 #define PMBUS_HAVE_POUT BIT(6)
329 #define PMBUS_HAVE_FAN12 BIT(7)
330 #define PMBUS_HAVE_FAN34 BIT(8)
331 #define PMBUS_HAVE_TEMP BIT(9)
332 #define PMBUS_HAVE_TEMP2 BIT(10)
333 #define PMBUS_HAVE_TEMP3 BIT(11)
334 #define PMBUS_HAVE_STATUS_VOUT BIT(12)
335 #define PMBUS_HAVE_STATUS_IOUT BIT(13)
336 #define PMBUS_HAVE_STATUS_INPUT BIT(14)
337 #define PMBUS_HAVE_STATUS_TEMP BIT(15)
338 #define PMBUS_HAVE_STATUS_FAN12 BIT(16)
339 #define PMBUS_HAVE_STATUS_FAN34 BIT(17)
340 #define PMBUS_HAVE_VMON BIT(18)
341 #define PMBUS_HAVE_STATUS_VMON BIT(19)
343 enum pmbus_data_format { linear = 0, direct, vid };
344 enum vrm_version { vr11 = 0, vr12 };
346 struct pmbus_driver_info {
347 int pages; /* Total number of pages */
348 enum pmbus_data_format format[PSC_NUM_CLASSES];
349 enum vrm_version vrm_version;
351 * Support one set of coefficients for each sensor type
352 * Used for chips providing data in direct mode.
354 int m[PSC_NUM_CLASSES]; /* mantissa for direct data format */
355 int b[PSC_NUM_CLASSES]; /* offset */
356 int R[PSC_NUM_CLASSES]; /* exponent */
358 u32 func[PMBUS_PAGES]; /* Functionality, per page */
360 * The following functions map manufacturing specific register values
361 * to PMBus standard register values. Specify only if mapping is
362 * necessary.
363 * Functions return the register value (read) or zero (write) if
364 * successful. A return value of -ENODATA indicates that there is no
365 * manufacturer specific register, but that a standard PMBus register
366 * may exist. Any other negative return value indicates that the
367 * register does not exist, and that no attempt should be made to read
368 * the standard register.
370 int (*read_byte_data)(struct i2c_client *client, int page, int reg);
371 int (*read_word_data)(struct i2c_client *client, int page, int reg);
372 int (*write_word_data)(struct i2c_client *client, int page, int reg,
373 u16 word);
374 int (*write_byte)(struct i2c_client *client, int page, u8 value);
376 * The identify function determines supported PMBus functionality.
377 * This function is only necessary if a chip driver supports multiple
378 * chips, and the chip functionality is not pre-determined.
380 int (*identify)(struct i2c_client *client,
381 struct pmbus_driver_info *info);
383 /* Regulator functionality, if supported by this chip driver. */
384 int num_regulators;
385 const struct regulator_desc *reg_desc;
388 /* Regulator ops */
390 extern const struct regulator_ops pmbus_regulator_ops;
392 /* Macro for filling in array of struct regulator_desc */
393 #define PMBUS_REGULATOR(_name, _id) \
394 [_id] = { \
395 .name = (_name # _id), \
396 .id = (_id), \
397 .of_match = of_match_ptr(_name # _id), \
398 .regulators_node = of_match_ptr("regulators"), \
399 .ops = &pmbus_regulator_ops, \
400 .type = REGULATOR_VOLTAGE, \
401 .owner = THIS_MODULE, \
404 /* Function declarations */
406 void pmbus_clear_cache(struct i2c_client *client);
407 int pmbus_set_page(struct i2c_client *client, u8 page);
408 int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg);
409 int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word);
410 int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
411 int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
412 int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg,
413 u8 value);
414 int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
415 u8 mask, u8 value);
416 void pmbus_clear_faults(struct i2c_client *client);
417 bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg);
418 bool pmbus_check_word_register(struct i2c_client *client, int page, int reg);
419 int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
420 struct pmbus_driver_info *info);
421 int pmbus_do_remove(struct i2c_client *client);
422 const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client
423 *client);
425 #endif /* PMBUS_H */