sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / ide / ide-io-std.c
blob19763977568c5d6fd7ecc87c3f4e7bc47fc0d85e
2 #include <linux/kernel.h>
3 #include <linux/export.h>
4 #include <linux/ide.h>
6 #if defined(CONFIG_ARM) || defined(CONFIG_M68K) || defined(CONFIG_MIPS) || \
7 defined(CONFIG_PARISC) || defined(CONFIG_PPC) || defined(CONFIG_SPARC)
8 #include <asm/ide.h>
9 #else
10 #include <asm-generic/ide_iops.h>
11 #endif
14 * Conventional PIO operations for ATA devices
17 static u8 ide_inb(unsigned long port)
19 return (u8) inb(port);
22 static void ide_outb(u8 val, unsigned long port)
24 outb(val, port);
28 * MMIO operations, typically used for SATA controllers
31 static u8 ide_mm_inb(unsigned long port)
33 return (u8) readb((void __iomem *) port);
36 static void ide_mm_outb(u8 value, unsigned long port)
38 writeb(value, (void __iomem *) port);
41 void ide_exec_command(ide_hwif_t *hwif, u8 cmd)
43 if (hwif->host_flags & IDE_HFLAG_MMIO)
44 writeb(cmd, (void __iomem *)hwif->io_ports.command_addr);
45 else
46 outb(cmd, hwif->io_ports.command_addr);
48 EXPORT_SYMBOL_GPL(ide_exec_command);
50 u8 ide_read_status(ide_hwif_t *hwif)
52 if (hwif->host_flags & IDE_HFLAG_MMIO)
53 return readb((void __iomem *)hwif->io_ports.status_addr);
54 else
55 return inb(hwif->io_ports.status_addr);
57 EXPORT_SYMBOL_GPL(ide_read_status);
59 u8 ide_read_altstatus(ide_hwif_t *hwif)
61 if (hwif->host_flags & IDE_HFLAG_MMIO)
62 return readb((void __iomem *)hwif->io_ports.ctl_addr);
63 else
64 return inb(hwif->io_ports.ctl_addr);
66 EXPORT_SYMBOL_GPL(ide_read_altstatus);
68 void ide_write_devctl(ide_hwif_t *hwif, u8 ctl)
70 if (hwif->host_flags & IDE_HFLAG_MMIO)
71 writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr);
72 else
73 outb(ctl, hwif->io_ports.ctl_addr);
75 EXPORT_SYMBOL_GPL(ide_write_devctl);
77 void ide_dev_select(ide_drive_t *drive)
79 ide_hwif_t *hwif = drive->hwif;
80 u8 select = drive->select | ATA_DEVICE_OBS;
82 if (hwif->host_flags & IDE_HFLAG_MMIO)
83 writeb(select, (void __iomem *)hwif->io_ports.device_addr);
84 else
85 outb(select, hwif->io_ports.device_addr);
87 EXPORT_SYMBOL_GPL(ide_dev_select);
89 void ide_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
91 ide_hwif_t *hwif = drive->hwif;
92 struct ide_io_ports *io_ports = &hwif->io_ports;
93 void (*tf_outb)(u8 addr, unsigned long port);
94 u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
96 if (mmio)
97 tf_outb = ide_mm_outb;
98 else
99 tf_outb = ide_outb;
101 if (valid & IDE_VALID_FEATURE)
102 tf_outb(tf->feature, io_ports->feature_addr);
103 if (valid & IDE_VALID_NSECT)
104 tf_outb(tf->nsect, io_ports->nsect_addr);
105 if (valid & IDE_VALID_LBAL)
106 tf_outb(tf->lbal, io_ports->lbal_addr);
107 if (valid & IDE_VALID_LBAM)
108 tf_outb(tf->lbam, io_ports->lbam_addr);
109 if (valid & IDE_VALID_LBAH)
110 tf_outb(tf->lbah, io_ports->lbah_addr);
111 if (valid & IDE_VALID_DEVICE)
112 tf_outb(tf->device, io_ports->device_addr);
114 EXPORT_SYMBOL_GPL(ide_tf_load);
116 void ide_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
118 ide_hwif_t *hwif = drive->hwif;
119 struct ide_io_ports *io_ports = &hwif->io_ports;
120 u8 (*tf_inb)(unsigned long port);
121 u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
123 if (mmio)
124 tf_inb = ide_mm_inb;
125 else
126 tf_inb = ide_inb;
128 if (valid & IDE_VALID_ERROR)
129 tf->error = tf_inb(io_ports->feature_addr);
130 if (valid & IDE_VALID_NSECT)
131 tf->nsect = tf_inb(io_ports->nsect_addr);
132 if (valid & IDE_VALID_LBAL)
133 tf->lbal = tf_inb(io_ports->lbal_addr);
134 if (valid & IDE_VALID_LBAM)
135 tf->lbam = tf_inb(io_ports->lbam_addr);
136 if (valid & IDE_VALID_LBAH)
137 tf->lbah = tf_inb(io_ports->lbah_addr);
138 if (valid & IDE_VALID_DEVICE)
139 tf->device = tf_inb(io_ports->device_addr);
141 EXPORT_SYMBOL_GPL(ide_tf_read);
144 * Some localbus EIDE interfaces require a special access sequence
145 * when using 32-bit I/O instructions to transfer data. We call this
146 * the "vlb_sync" sequence, which consists of three successive reads
147 * of the sector count register location, with interrupts disabled
148 * to ensure that the reads all happen together.
150 static void ata_vlb_sync(unsigned long port)
152 (void)inb(port);
153 (void)inb(port);
154 (void)inb(port);
158 * This is used for most PIO data transfers *from* the IDE interface
160 * These routines will round up any request for an odd number of bytes,
161 * so if an odd len is specified, be sure that there's at least one
162 * extra byte allocated for the buffer.
164 void ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf,
165 unsigned int len)
167 ide_hwif_t *hwif = drive->hwif;
168 struct ide_io_ports *io_ports = &hwif->io_ports;
169 unsigned long data_addr = io_ports->data_addr;
170 unsigned int words = (len + 1) >> 1;
171 u8 io_32bit = drive->io_32bit;
172 u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
174 if (io_32bit) {
175 unsigned long uninitialized_var(flags);
177 if ((io_32bit & 2) && !mmio) {
178 local_irq_save(flags);
179 ata_vlb_sync(io_ports->nsect_addr);
182 words >>= 1;
183 if (mmio)
184 __ide_mm_insl((void __iomem *)data_addr, buf, words);
185 else
186 insl(data_addr, buf, words);
188 if ((io_32bit & 2) && !mmio)
189 local_irq_restore(flags);
191 if (((len + 1) & 3) < 2)
192 return;
194 buf += len & ~3;
195 words = 1;
198 if (mmio)
199 __ide_mm_insw((void __iomem *)data_addr, buf, words);
200 else
201 insw(data_addr, buf, words);
203 EXPORT_SYMBOL_GPL(ide_input_data);
206 * This is used for most PIO data transfers *to* the IDE interface
208 void ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf,
209 unsigned int len)
211 ide_hwif_t *hwif = drive->hwif;
212 struct ide_io_ports *io_ports = &hwif->io_ports;
213 unsigned long data_addr = io_ports->data_addr;
214 unsigned int words = (len + 1) >> 1;
215 u8 io_32bit = drive->io_32bit;
216 u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
218 if (io_32bit) {
219 unsigned long uninitialized_var(flags);
221 if ((io_32bit & 2) && !mmio) {
222 local_irq_save(flags);
223 ata_vlb_sync(io_ports->nsect_addr);
226 words >>= 1;
227 if (mmio)
228 __ide_mm_outsl((void __iomem *)data_addr, buf, words);
229 else
230 outsl(data_addr, buf, words);
232 if ((io_32bit & 2) && !mmio)
233 local_irq_restore(flags);
235 if (((len + 1) & 3) < 2)
236 return;
238 buf += len & ~3;
239 words = 1;
242 if (mmio)
243 __ide_mm_outsw((void __iomem *)data_addr, buf, words);
244 else
245 outsw(data_addr, buf, words);
247 EXPORT_SYMBOL_GPL(ide_output_data);
249 const struct ide_tp_ops default_tp_ops = {
250 .exec_command = ide_exec_command,
251 .read_status = ide_read_status,
252 .read_altstatus = ide_read_altstatus,
253 .write_devctl = ide_write_devctl,
255 .dev_select = ide_dev_select,
256 .tf_load = ide_tf_load,
257 .tf_read = ide_tf_read,
259 .input_data = ide_input_data,
260 .output_data = ide_output_data,