2 * AD7887 SPI ADC driver
4 * Copyright 2010-2011 Analog Devices Inc.
6 * Licensed under the GPL-2.
9 #include <linux/device.h>
10 #include <linux/kernel.h>
11 #include <linux/slab.h>
12 #include <linux/sysfs.h>
13 #include <linux/spi/spi.h>
14 #include <linux/regulator/consumer.h>
15 #include <linux/err.h>
16 #include <linux/module.h>
17 #include <linux/interrupt.h>
18 #include <linux/bitops.h>
20 #include <linux/iio/iio.h>
21 #include <linux/iio/sysfs.h>
22 #include <linux/iio/buffer.h>
24 #include <linux/iio/trigger_consumer.h>
25 #include <linux/iio/triggered_buffer.h>
27 #include <linux/platform_data/ad7887.h>
29 #define AD7887_REF_DIS BIT(5) /* on-chip reference disable */
30 #define AD7887_DUAL BIT(4) /* dual-channel mode */
31 #define AD7887_CH_AIN1 BIT(3) /* convert on channel 1, DUAL=1 */
32 #define AD7887_CH_AIN0 0 /* convert on channel 0, DUAL=0,1 */
33 #define AD7887_PM_MODE1 0 /* CS based shutdown */
34 #define AD7887_PM_MODE2 1 /* full on */
35 #define AD7887_PM_MODE3 2 /* auto shutdown after conversion */
36 #define AD7887_PM_MODE4 3 /* standby mode */
38 enum ad7887_channels
{
45 * struct ad7887_chip_info - chip specifc information
46 * @int_vref_mv: the internal reference voltage
47 * @channel: channel specification
49 struct ad7887_chip_info
{
51 struct iio_chan_spec channel
[3];
55 struct spi_device
*spi
;
56 const struct ad7887_chip_info
*chip_info
;
57 struct regulator
*reg
;
58 struct spi_transfer xfer
[4];
59 struct spi_message msg
[3];
60 struct spi_message
*ring_msg
;
61 unsigned char tx_cmd_buf
[4];
64 * DMA (thus cache coherency maintenance) requires the
65 * transfer buffers to live in their own cache lines.
66 * Buffer needs to be large enough to hold two 16 bit samples and a
67 * 64 bit aligned 64 bit timestamp.
69 unsigned char data
[ALIGN(4, sizeof(s64
)) + sizeof(s64
)]
70 ____cacheline_aligned
;
73 enum ad7887_supported_device_ids
{
77 static int ad7887_ring_preenable(struct iio_dev
*indio_dev
)
79 struct ad7887_state
*st
= iio_priv(indio_dev
);
81 /* We know this is a single long so can 'cheat' */
82 switch (*indio_dev
->active_scan_mask
) {
84 st
->ring_msg
= &st
->msg
[AD7887_CH0
];
87 st
->ring_msg
= &st
->msg
[AD7887_CH1
];
88 /* Dummy read: push CH1 setting down to hardware */
89 spi_sync(st
->spi
, st
->ring_msg
);
91 case ((1 << 1) | (1 << 0)):
92 st
->ring_msg
= &st
->msg
[AD7887_CH0_CH1
];
99 static int ad7887_ring_postdisable(struct iio_dev
*indio_dev
)
101 struct ad7887_state
*st
= iio_priv(indio_dev
);
103 /* dummy read: restore default CH0 settin */
104 return spi_sync(st
->spi
, &st
->msg
[AD7887_CH0
]);
108 * ad7887_trigger_handler() bh of trigger launched polling to ring buffer
110 * Currently there is no option in this driver to disable the saving of
111 * timestamps within the ring.
113 static irqreturn_t
ad7887_trigger_handler(int irq
, void *p
)
115 struct iio_poll_func
*pf
= p
;
116 struct iio_dev
*indio_dev
= pf
->indio_dev
;
117 struct ad7887_state
*st
= iio_priv(indio_dev
);
120 b_sent
= spi_sync(st
->spi
, st
->ring_msg
);
124 iio_push_to_buffers_with_timestamp(indio_dev
, st
->data
,
125 iio_get_time_ns(indio_dev
));
127 iio_trigger_notify_done(indio_dev
->trig
);
132 static const struct iio_buffer_setup_ops ad7887_ring_setup_ops
= {
133 .preenable
= &ad7887_ring_preenable
,
134 .postenable
= &iio_triggered_buffer_postenable
,
135 .predisable
= &iio_triggered_buffer_predisable
,
136 .postdisable
= &ad7887_ring_postdisable
,
139 static int ad7887_scan_direct(struct ad7887_state
*st
, unsigned ch
)
141 int ret
= spi_sync(st
->spi
, &st
->msg
[ch
]);
145 return (st
->data
[(ch
* 2)] << 8) | st
->data
[(ch
* 2) + 1];
148 static int ad7887_read_raw(struct iio_dev
*indio_dev
,
149 struct iio_chan_spec
const *chan
,
155 struct ad7887_state
*st
= iio_priv(indio_dev
);
158 case IIO_CHAN_INFO_RAW
:
159 ret
= iio_device_claim_direct_mode(indio_dev
);
162 ret
= ad7887_scan_direct(st
, chan
->address
);
163 iio_device_release_direct_mode(indio_dev
);
167 *val
= ret
>> chan
->scan_type
.shift
;
168 *val
&= GENMASK(chan
->scan_type
.realbits
- 1, 0);
170 case IIO_CHAN_INFO_SCALE
:
172 *val
= regulator_get_voltage(st
->reg
);
177 *val
= st
->chip_info
->int_vref_mv
;
180 *val2
= chan
->scan_type
.realbits
;
182 return IIO_VAL_FRACTIONAL_LOG2
;
188 static const struct ad7887_chip_info ad7887_chip_info_tbl
[] = {
190 * More devices added in future
197 .info_mask_separate
= BIT(IIO_CHAN_INFO_RAW
),
198 .info_mask_shared_by_type
= BIT(IIO_CHAN_INFO_SCALE
),
206 .endianness
= IIO_BE
,
213 .info_mask_separate
= BIT(IIO_CHAN_INFO_RAW
),
214 .info_mask_shared_by_type
= BIT(IIO_CHAN_INFO_SCALE
),
222 .endianness
= IIO_BE
,
225 .channel
[2] = IIO_CHAN_SOFT_TIMESTAMP(2),
230 static const struct iio_info ad7887_info
= {
231 .read_raw
= &ad7887_read_raw
,
232 .driver_module
= THIS_MODULE
,
235 static int ad7887_probe(struct spi_device
*spi
)
237 struct ad7887_platform_data
*pdata
= spi
->dev
.platform_data
;
238 struct ad7887_state
*st
;
239 struct iio_dev
*indio_dev
;
243 indio_dev
= devm_iio_device_alloc(&spi
->dev
, sizeof(*st
));
244 if (indio_dev
== NULL
)
247 st
= iio_priv(indio_dev
);
249 if (!pdata
|| !pdata
->use_onchip_ref
) {
250 st
->reg
= devm_regulator_get(&spi
->dev
, "vref");
252 return PTR_ERR(st
->reg
);
254 ret
= regulator_enable(st
->reg
);
260 &ad7887_chip_info_tbl
[spi_get_device_id(spi
)->driver_data
];
262 spi_set_drvdata(spi
, indio_dev
);
265 /* Estabilish that the iio_dev is a child of the spi device */
266 indio_dev
->dev
.parent
= &spi
->dev
;
267 indio_dev
->dev
.of_node
= spi
->dev
.of_node
;
268 indio_dev
->name
= spi_get_device_id(spi
)->name
;
269 indio_dev
->info
= &ad7887_info
;
270 indio_dev
->modes
= INDIO_DIRECT_MODE
;
272 /* Setup default message */
274 mode
= AD7887_PM_MODE4
;
275 if (!pdata
|| !pdata
->use_onchip_ref
)
276 mode
|= AD7887_REF_DIS
;
277 if (pdata
&& pdata
->en_dual
)
280 st
->tx_cmd_buf
[0] = AD7887_CH_AIN0
| mode
;
282 st
->xfer
[0].rx_buf
= &st
->data
[0];
283 st
->xfer
[0].tx_buf
= &st
->tx_cmd_buf
[0];
286 spi_message_init(&st
->msg
[AD7887_CH0
]);
287 spi_message_add_tail(&st
->xfer
[0], &st
->msg
[AD7887_CH0
]);
289 if (pdata
&& pdata
->en_dual
) {
290 st
->tx_cmd_buf
[2] = AD7887_CH_AIN1
| mode
;
292 st
->xfer
[1].rx_buf
= &st
->data
[0];
293 st
->xfer
[1].tx_buf
= &st
->tx_cmd_buf
[2];
296 st
->xfer
[2].rx_buf
= &st
->data
[2];
297 st
->xfer
[2].tx_buf
= &st
->tx_cmd_buf
[0];
300 spi_message_init(&st
->msg
[AD7887_CH0_CH1
]);
301 spi_message_add_tail(&st
->xfer
[1], &st
->msg
[AD7887_CH0_CH1
]);
302 spi_message_add_tail(&st
->xfer
[2], &st
->msg
[AD7887_CH0_CH1
]);
304 st
->xfer
[3].rx_buf
= &st
->data
[2];
305 st
->xfer
[3].tx_buf
= &st
->tx_cmd_buf
[2];
308 spi_message_init(&st
->msg
[AD7887_CH1
]);
309 spi_message_add_tail(&st
->xfer
[3], &st
->msg
[AD7887_CH1
]);
311 indio_dev
->channels
= st
->chip_info
->channel
;
312 indio_dev
->num_channels
= 3;
314 indio_dev
->channels
= &st
->chip_info
->channel
[1];
315 indio_dev
->num_channels
= 2;
318 ret
= iio_triggered_buffer_setup(indio_dev
, &iio_pollfunc_store_time
,
319 &ad7887_trigger_handler
, &ad7887_ring_setup_ops
);
321 goto error_disable_reg
;
323 ret
= iio_device_register(indio_dev
);
325 goto error_unregister_ring
;
328 error_unregister_ring
:
329 iio_triggered_buffer_cleanup(indio_dev
);
332 regulator_disable(st
->reg
);
337 static int ad7887_remove(struct spi_device
*spi
)
339 struct iio_dev
*indio_dev
= spi_get_drvdata(spi
);
340 struct ad7887_state
*st
= iio_priv(indio_dev
);
342 iio_device_unregister(indio_dev
);
343 iio_triggered_buffer_cleanup(indio_dev
);
345 regulator_disable(st
->reg
);
350 static const struct spi_device_id ad7887_id
[] = {
351 {"ad7887", ID_AD7887
},
354 MODULE_DEVICE_TABLE(spi
, ad7887_id
);
356 static struct spi_driver ad7887_driver
= {
360 .probe
= ad7887_probe
,
361 .remove
= ad7887_remove
,
362 .id_table
= ad7887_id
,
364 module_spi_driver(ad7887_driver
);
366 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
367 MODULE_DESCRIPTION("Analog Devices AD7887 ADC");
368 MODULE_LICENSE("GPL v2");