drivers/iio/adc/bcm_iproc_adc.c

   1 /*
   2  * Copyright 2016 Broadcom
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License, version 2, as
   6  * published by the Free Software Foundation (the "GPL").
   7  *
   8  * This program is distributed in the hope that it will be useful, but
   9  * WITHOUT ANY WARRANTY; without even the implied warranty of
  10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11  * General Public License version 2 (GPLv2) for more details.
  12  *
  13  * You should have received a copy of the GNU General Public License
  14  * version 2 (GPLv2) along with this source code.
  15  */
  16
  17 #include <linux/module.h>
  18 #include <linux/of.h>
  19 #include <linux/io.h>
  20 #include <linux/clk.h>
  21 #include <linux/mfd/syscon.h>
  22 #include <linux/regmap.h>
  23 #include <linux/delay.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/platform_device.h>
  26
  27 #include <linux/iio/iio.h>
  28
  29 /* Below Register's are common to IPROC ADC and Touchscreen IP */
  30 #define IPROC_REGCTL1                   0x00
  31 #define IPROC_REGCTL2                   0x04
  32 #define IPROC_INTERRUPT_THRES           0x08
  33 #define IPROC_INTERRUPT_MASK            0x0c
  34 #define IPROC_INTERRUPT_STATUS          0x10
  35 #define IPROC_ANALOG_CONTROL            0x1c
  36 #define IPROC_CONTROLLER_STATUS         0x14
  37 #define IPROC_AUX_DATA                  0x20
  38 #define IPROC_SOFT_BYPASS_CONTROL       0x38
  39 #define IPROC_SOFT_BYPASS_DATA          0x3C
  40
  41 /* IPROC ADC Channel register offsets */
  42 #define IPROC_ADC_CHANNEL_REGCTL1               0x800
  43 #define IPROC_ADC_CHANNEL_REGCTL2               0x804
  44 #define IPROC_ADC_CHANNEL_STATUS                0x808
  45 #define IPROC_ADC_CHANNEL_INTERRUPT_STATUS      0x80c
  46 #define IPROC_ADC_CHANNEL_INTERRUPT_MASK        0x810
  47 #define IPROC_ADC_CHANNEL_DATA                  0x814
  48 #define IPROC_ADC_CHANNEL_OFFSET                0x20
  49
  50 /* Bit definitions for IPROC_REGCTL2 */
  51 #define IPROC_ADC_AUXIN_SCAN_ENA        BIT(0)
  52 #define IPROC_ADC_PWR_LDO               BIT(5)
  53 #define IPROC_ADC_PWR_ADC               BIT(4)
  54 #define IPROC_ADC_PWR_BG                BIT(3)
  55 #define IPROC_ADC_CONTROLLER_EN         BIT(17)
  56
  57 /* Bit definitions for IPROC_INTERRUPT_MASK and IPROC_INTERRUPT_STATUS */
  58 #define IPROC_ADC_AUXDATA_RDY_INTR      BIT(3)
  59 #define IPROC_ADC_INTR                  9
  60 #define IPROC_ADC_INTR_MASK             (0xFF << IPROC_ADC_INTR)
  61
  62 /* Bit definitions for IPROC_ANALOG_CONTROL */
  63 #define IPROC_ADC_CHANNEL_SEL           11
  64 #define IPROC_ADC_CHANNEL_SEL_MASK      (0x7 << IPROC_ADC_CHANNEL_SEL)
  65
  66 /* Bit definitions for IPROC_ADC_CHANNEL_REGCTL1 */
  67 #define IPROC_ADC_CHANNEL_ROUNDS        0x2
  68 #define IPROC_ADC_CHANNEL_ROUNDS_MASK   (0x3F << IPROC_ADC_CHANNEL_ROUNDS)
  69 #define IPROC_ADC_CHANNEL_MODE          0x1
  70 #define IPROC_ADC_CHANNEL_MODE_MASK     (0x1 << IPROC_ADC_CHANNEL_MODE)
  71 #define IPROC_ADC_CHANNEL_MODE_TDM      0x1
  72 #define IPROC_ADC_CHANNEL_MODE_SNAPSHOT 0x0
  73 #define IPROC_ADC_CHANNEL_ENABLE        0x0
  74 #define IPROC_ADC_CHANNEL_ENABLE_MASK   0x1
  75
  76 /* Bit definitions for IPROC_ADC_CHANNEL_REGCTL2 */
  77 #define IPROC_ADC_CHANNEL_WATERMARK     0x0
  78 #define IPROC_ADC_CHANNEL_WATERMARK_MASK \
  79                 (0x3F << IPROC_ADC_CHANNEL_WATERMARK)
  80
  81 #define IPROC_ADC_WATER_MARK_LEVEL      0x1
  82
  83 /* Bit definitions for IPROC_ADC_CHANNEL_STATUS */
  84 #define IPROC_ADC_CHANNEL_DATA_LOST             0x0
  85 #define IPROC_ADC_CHANNEL_DATA_LOST_MASK        \
  86                 (0x0 << IPROC_ADC_CHANNEL_DATA_LOST)
  87 #define IPROC_ADC_CHANNEL_VALID_ENTERIES        0x1
  88 #define IPROC_ADC_CHANNEL_VALID_ENTERIES_MASK   \
  89                 (0xFF << IPROC_ADC_CHANNEL_VALID_ENTERIES)
  90 #define IPROC_ADC_CHANNEL_TOTAL_ENTERIES        0x9
  91 #define IPROC_ADC_CHANNEL_TOTAL_ENTERIES_MASK   \
  92                 (0xFF << IPROC_ADC_CHANNEL_TOTAL_ENTERIES)
  93
  94 /* Bit definitions for IPROC_ADC_CHANNEL_INTERRUPT_MASK */
  95 #define IPROC_ADC_CHANNEL_WTRMRK_INTR                   0x0
  96 #define IPROC_ADC_CHANNEL_WTRMRK_INTR_MASK              \
  97                 (0x1 << IPROC_ADC_CHANNEL_WTRMRK_INTR)
  98 #define IPROC_ADC_CHANNEL_FULL_INTR                     0x1
  99 #define IPROC_ADC_CHANNEL_FULL_INTR_MASK                \
 100                 (0x1 << IPROC_ADC_IPROC_ADC_CHANNEL_FULL_INTR)
 101 #define IPROC_ADC_CHANNEL_EMPTY_INTR                    0x2
 102 #define IPROC_ADC_CHANNEL_EMPTY_INTR_MASK               \
 103                 (0x1 << IPROC_ADC_CHANNEL_EMPTY_INTR)
 104
 105 #define IPROC_ADC_WATER_MARK_INTR_ENABLE                0x1
 106
 107 /* Number of time to retry a set of the interrupt mask reg */
 108 #define IPROC_ADC_INTMASK_RETRY_ATTEMPTS                10
 109
 110 #define IPROC_ADC_READ_TIMEOUT        (HZ*2)
 111
 112 #define iproc_adc_dbg_reg(dev, priv, reg) \
 113 do { \
 114         u32 val; \
 115         regmap_read(priv->regmap, reg, &val); \
 116         dev_dbg(dev, "%20s= 0x%08x\n", #reg, val); \
 117 } while (0)
 118
 119 struct iproc_adc_priv {
 120         struct regmap *regmap;
 121         struct clk *adc_clk;
 122         struct mutex mutex;
 123         int  irqno;
 124         int chan_val;
 125         int chan_id;
 126         struct completion completion;
 127 };
 128
 129 static void iproc_adc_reg_dump(struct iio_dev *indio_dev)
 130 {
 131         struct device *dev = &indio_dev->dev;
 132         struct iproc_adc_priv *adc_priv = iio_priv(indio_dev);
 133
 134         iproc_adc_dbg_reg(dev, adc_priv, IPROC_REGCTL1);
 135         iproc_adc_dbg_reg(dev, adc_priv, IPROC_REGCTL2);
 136         iproc_adc_dbg_reg(dev, adc_priv, IPROC_INTERRUPT_THRES);
 137         iproc_adc_dbg_reg(dev, adc_priv, IPROC_INTERRUPT_MASK);
 138         iproc_adc_dbg_reg(dev, adc_priv, IPROC_INTERRUPT_STATUS);
 139         iproc_adc_dbg_reg(dev, adc_priv, IPROC_CONTROLLER_STATUS);
 140         iproc_adc_dbg_reg(dev, adc_priv, IPROC_ANALOG_CONTROL);
 141         iproc_adc_dbg_reg(dev, adc_priv, IPROC_AUX_DATA);
 142         iproc_adc_dbg_reg(dev, adc_priv, IPROC_SOFT_BYPASS_CONTROL);
 143         iproc_adc_dbg_reg(dev, adc_priv, IPROC_SOFT_BYPASS_DATA);
 144 }
 145
 146 static irqreturn_t iproc_adc_interrupt_handler(int irq, void *data)
 147 {
 148         u32 channel_intr_status;
 149         u32 intr_status;
 150         u32 intr_mask;
 151         struct iio_dev *indio_dev = data;
 152         struct iproc_adc_priv *adc_priv = iio_priv(indio_dev);
 153
 154         /*
 155          * This interrupt is shared with the touchscreen driver.
 156          * Make sure this interrupt is intended for us.
 157          * Handle only ADC channel specific interrupts.
 158          */
 159         regmap_read(adc_priv->regmap, IPROC_INTERRUPT_STATUS, &intr_status);
 160         regmap_read(adc_priv->regmap, IPROC_INTERRUPT_MASK, &intr_mask);
 161         intr_status = intr_status & intr_mask;
 162         channel_intr_status = (intr_status & IPROC_ADC_INTR_MASK) >>
 163                                 IPROC_ADC_INTR;
 164         if (channel_intr_status)
 165                 return IRQ_WAKE_THREAD;
 166
 167         return IRQ_NONE;
 168 }
 169
 170 static irqreturn_t iproc_adc_interrupt_thread(int irq, void *data)
 171 {
 172         irqreturn_t retval = IRQ_NONE;
 173         struct iproc_adc_priv *adc_priv;
 174         struct iio_dev *indio_dev = data;
 175         unsigned int valid_entries;
 176         u32 intr_status;
 177         u32 intr_channels;
 178         u32 channel_status;
 179         u32 ch_intr_status;
 180
 181         adc_priv = iio_priv(indio_dev);
 182
 183         regmap_read(adc_priv->regmap, IPROC_INTERRUPT_STATUS, &intr_status);
 184         dev_dbg(&indio_dev->dev, "iproc_adc_interrupt_thread(),INTRPT_STS:%x\n",
 185                         intr_status);
 186
 187         intr_channels = (intr_status & IPROC_ADC_INTR_MASK) >> IPROC_ADC_INTR;
 188         if (intr_channels) {
 189                 regmap_read(adc_priv->regmap,
 190                             IPROC_ADC_CHANNEL_INTERRUPT_STATUS +
 191                             IPROC_ADC_CHANNEL_OFFSET * adc_priv->chan_id,
 192                             &ch_intr_status);
 193
 194                 if (ch_intr_status & IPROC_ADC_CHANNEL_WTRMRK_INTR_MASK) {
 195                         regmap_read(adc_priv->regmap,
 196                                         IPROC_ADC_CHANNEL_STATUS +
 197                                         IPROC_ADC_CHANNEL_OFFSET *
 198                                         adc_priv->chan_id,
 199                                         &channel_status);
 200
 201                         valid_entries = ((channel_status &
 202                                 IPROC_ADC_CHANNEL_VALID_ENTERIES_MASK) >>
 203                                 IPROC_ADC_CHANNEL_VALID_ENTERIES);
 204                         if (valid_entries >= 1) {
 205                                 regmap_read(adc_priv->regmap,
 206                                         IPROC_ADC_CHANNEL_DATA +
 207                                         IPROC_ADC_CHANNEL_OFFSET *
 208                                         adc_priv->chan_id,
 209                                         &adc_priv->chan_val);
 210                                 complete(&adc_priv->completion);
 211                         } else {
 212                                 dev_err(&indio_dev->dev,
 213                                         "No data rcvd on channel %d\n",
 214                                         adc_priv->chan_id);
 215                         }
 216                         regmap_write(adc_priv->regmap,
 217                                         IPROC_ADC_CHANNEL_INTERRUPT_MASK +
 218                                         IPROC_ADC_CHANNEL_OFFSET *
 219                                         adc_priv->chan_id,
 220                                         (ch_intr_status &
 221                                         ~(IPROC_ADC_CHANNEL_WTRMRK_INTR_MASK)));
 222                 }
 223                 regmap_write(adc_priv->regmap,
 224                                 IPROC_ADC_CHANNEL_INTERRUPT_STATUS +
 225                                 IPROC_ADC_CHANNEL_OFFSET * adc_priv->chan_id,
 226                                 ch_intr_status);
 227                 regmap_write(adc_priv->regmap, IPROC_INTERRUPT_STATUS,
 228                                 intr_channels);
 229                 retval = IRQ_HANDLED;
 230         }
 231
 232         return retval;
 233 }
 234
 235 static int iproc_adc_do_read(struct iio_dev *indio_dev,
 236                            int channel,
 237                            u16 *p_adc_data)
 238 {
 239         int read_len = 0;
 240         u32 val;
 241         u32 mask;
 242         u32 val_check;
 243         int failed_cnt = 0;
 244         struct iproc_adc_priv *adc_priv = iio_priv(indio_dev);
 245
 246         mutex_lock(&adc_priv->mutex);
 247
 248         /*
 249          * After a read is complete the ADC interrupts will be disabled so
 250          * we can assume this section of code is safe from interrupts.
 251          */
 252         adc_priv->chan_val = -1;
 253         adc_priv->chan_id = channel;
 254
 255         reinit_completion(&adc_priv->completion);
 256         /* Clear any pending interrupt */
 257         regmap_update_bits(adc_priv->regmap, IPROC_INTERRUPT_STATUS,
 258                         IPROC_ADC_INTR_MASK | IPROC_ADC_AUXDATA_RDY_INTR,
 259                         ((0x0 << channel) << IPROC_ADC_INTR) |
 260                         IPROC_ADC_AUXDATA_RDY_INTR);
 261
 262         /* Configure channel for snapshot mode and enable  */
 263         val = (BIT(IPROC_ADC_CHANNEL_ROUNDS) |
 264                 (IPROC_ADC_CHANNEL_MODE_SNAPSHOT << IPROC_ADC_CHANNEL_MODE) |
 265                 (0x1 << IPROC_ADC_CHANNEL_ENABLE));
 266
 267         mask = IPROC_ADC_CHANNEL_ROUNDS_MASK | IPROC_ADC_CHANNEL_MODE_MASK |
 268                 IPROC_ADC_CHANNEL_ENABLE_MASK;
 269         regmap_update_bits(adc_priv->regmap, (IPROC_ADC_CHANNEL_REGCTL1 +
 270                                 IPROC_ADC_CHANNEL_OFFSET * channel),
 271                                 mask, val);
 272
 273         /* Set the Watermark for a channel */
 274         regmap_update_bits(adc_priv->regmap, (IPROC_ADC_CHANNEL_REGCTL2 +
 275                                         IPROC_ADC_CHANNEL_OFFSET * channel),
 276                                         IPROC_ADC_CHANNEL_WATERMARK_MASK,
 277                                         0x1);
 278
 279         /* Enable water mark interrupt */
 280         regmap_update_bits(adc_priv->regmap, (IPROC_ADC_CHANNEL_INTERRUPT_MASK +
 281                                         IPROC_ADC_CHANNEL_OFFSET *
 282                                         channel),
 283                                         IPROC_ADC_CHANNEL_WTRMRK_INTR_MASK,
 284                                         IPROC_ADC_WATER_MARK_INTR_ENABLE);
 285         regmap_read(adc_priv->regmap, IPROC_INTERRUPT_MASK, &val);
 286
 287         /* Enable ADC interrupt for a channel */
 288         val |= (BIT(channel) << IPROC_ADC_INTR);
 289         regmap_write(adc_priv->regmap, IPROC_INTERRUPT_MASK, val);
 290
 291         /*
 292          * There seems to be a very rare issue where writing to this register
 293          * does not take effect.  To work around the issue we will try multiple
 294          * writes.  In total we will spend about 10*10 = 100 us attempting this.
 295          * Testing has shown that this may loop a few time, but we have never
 296          * hit the full count.
 297          */
 298         regmap_read(adc_priv->regmap, IPROC_INTERRUPT_MASK, &val_check);
 299         while (val_check != val) {
 300                 failed_cnt++;
 301
 302                 if (failed_cnt > IPROC_ADC_INTMASK_RETRY_ATTEMPTS)
 303                         break;
 304
 305                 udelay(10);
 306                 regmap_update_bits(adc_priv->regmap, IPROC_INTERRUPT_MASK,
 307                                 IPROC_ADC_INTR_MASK,
 308                                 ((0x1 << channel) <<
 309                                 IPROC_ADC_INTR));
 310
 311                 regmap_read(adc_priv->regmap, IPROC_INTERRUPT_MASK, &val_check);
 312         }
 313
 314         if (failed_cnt) {
 315                 dev_dbg(&indio_dev->dev,
 316                         "IntMask failed (%d times)", failed_cnt);
 317                 if (failed_cnt > IPROC_ADC_INTMASK_RETRY_ATTEMPTS) {
 318                         dev_err(&indio_dev->dev,
 319                                 "IntMask set failed. Read will likely fail.");
 320                         read_len = -EIO;
 321                         goto adc_err;
 322                 };
 323         }
 324         regmap_read(adc_priv->regmap, IPROC_INTERRUPT_MASK, &val_check);
 325
 326         if (wait_for_completion_timeout(&adc_priv->completion,
 327                 IPROC_ADC_READ_TIMEOUT) > 0) {
 328
 329                 /* Only the lower 16 bits are relevant */
 330                 *p_adc_data = adc_priv->chan_val & 0xFFFF;
 331                 read_len = sizeof(*p_adc_data);
 332
 333         } else {
 334                 /*
 335                  * We never got the interrupt, something went wrong.
 336                  * Perhaps the interrupt may still be coming, we do not want
 337                  * that now.  Lets disable the ADC interrupt, and clear the
 338                  * status to put it back in to normal state.
 339                  */
 340                 read_len = -ETIMEDOUT;
 341                 goto adc_err;
 342         }
 343         mutex_unlock(&adc_priv->mutex);
 344
 345         return read_len;
 346
 347 adc_err:
 348         regmap_update_bits(adc_priv->regmap, IPROC_INTERRUPT_MASK,
 349                            IPROC_ADC_INTR_MASK,
 350                            ((0x0 << channel) << IPROC_ADC_INTR));
 351
 352         regmap_update_bits(adc_priv->regmap, IPROC_INTERRUPT_STATUS,
 353                            IPROC_ADC_INTR_MASK,
 354                            ((0x0 << channel) << IPROC_ADC_INTR));
 355
 356         dev_err(&indio_dev->dev, "Timed out waiting for ADC data!\n");
 357         iproc_adc_reg_dump(indio_dev);
 358         mutex_unlock(&adc_priv->mutex);
 359
 360         return read_len;
 361 }
 362
 363 static int iproc_adc_enable(struct iio_dev *indio_dev)
 364 {
 365         u32 val;
 366         u32 channel_id;
 367         struct iproc_adc_priv *adc_priv = iio_priv(indio_dev);
 368         int ret;
 369
 370         /* Set i_amux = 3b'000, select channel 0 */
 371         ret = regmap_update_bits(adc_priv->regmap, IPROC_ANALOG_CONTROL,
 372                                 IPROC_ADC_CHANNEL_SEL_MASK, 0);
 373         if (ret) {
 374                 dev_err(&indio_dev->dev,
 375                         "failed to write IPROC_ANALOG_CONTROL %d\n", ret);
 376                 return ret;
 377         }
 378         adc_priv->chan_val = -1;
 379
 380         /*
 381          * PWR up LDO, ADC, and Band Gap (0 to enable)
 382          * Also enable ADC controller (set high)
 383          */
 384         ret = regmap_read(adc_priv->regmap, IPROC_REGCTL2, &val);
 385         if (ret) {
 386                 dev_err(&indio_dev->dev,
 387                         "failed to read IPROC_REGCTL2 %d\n", ret);
 388                 return ret;
 389         }
 390
 391         val &= ~(IPROC_ADC_PWR_LDO | IPROC_ADC_PWR_ADC | IPROC_ADC_PWR_BG);
 392
 393         ret = regmap_write(adc_priv->regmap, IPROC_REGCTL2, val);
 394         if (ret) {
 395                 dev_err(&indio_dev->dev,
 396                         "failed to write IPROC_REGCTL2 %d\n", ret);
 397                 return ret;
 398         }
 399
 400         ret = regmap_read(adc_priv->regmap, IPROC_REGCTL2, &val);
 401         if (ret) {
 402                 dev_err(&indio_dev->dev,
 403                         "failed to read IPROC_REGCTL2 %d\n", ret);
 404                 return ret;
 405         }
 406
 407         val |= IPROC_ADC_CONTROLLER_EN;
 408         ret = regmap_write(adc_priv->regmap, IPROC_REGCTL2, val);
 409         if (ret) {
 410                 dev_err(&indio_dev->dev,
 411                         "failed to write IPROC_REGCTL2 %d\n", ret);
 412                 return ret;
 413         }
 414
 415         for (channel_id = 0; channel_id < indio_dev->num_channels;
 416                 channel_id++) {
 417                 ret = regmap_write(adc_priv->regmap,
 418                                 IPROC_ADC_CHANNEL_INTERRUPT_MASK +
 419                                 IPROC_ADC_CHANNEL_OFFSET * channel_id, 0);
 420                 if (ret) {
 421                         dev_err(&indio_dev->dev,
 422                             "failed to write ADC_CHANNEL_INTERRUPT_MASK %d\n",
 423                             ret);
 424                         return ret;
 425                 }
 426
 427                 ret = regmap_write(adc_priv->regmap,
 428                                 IPROC_ADC_CHANNEL_INTERRUPT_STATUS +
 429                                 IPROC_ADC_CHANNEL_OFFSET * channel_id, 0);
 430                 if (ret) {
 431                         dev_err(&indio_dev->dev,
 432                             "failed to write ADC_CHANNEL_INTERRUPT_STATUS %d\n",
 433                             ret);
 434                         return ret;
 435                 }
 436         }
 437
 438         return 0;
 439 }
 440
 441 static void iproc_adc_disable(struct iio_dev *indio_dev)
 442 {
 443         u32 val;
 444         int ret;
 445         struct iproc_adc_priv *adc_priv = iio_priv(indio_dev);
 446
 447         ret = regmap_read(adc_priv->regmap, IPROC_REGCTL2, &val);
 448         if (ret) {
 449                 dev_err(&indio_dev->dev,
 450                         "failed to read IPROC_REGCTL2 %d\n", ret);
 451                 return;
 452         }
 453
 454         val &= ~IPROC_ADC_CONTROLLER_EN;
 455         ret = regmap_write(adc_priv->regmap, IPROC_REGCTL2, val);
 456         if (ret) {
 457                 dev_err(&indio_dev->dev,
 458                         "failed to write IPROC_REGCTL2 %d\n", ret);
 459                 return;
 460         }
 461 }
 462
 463 static int iproc_adc_read_raw(struct iio_dev *indio_dev,
 464                           struct iio_chan_spec const *chan,
 465                           int *val,
 466                           int *val2,
 467                           long mask)
 468 {
 469         u16 adc_data;
 470         int err;
 471
 472         switch (mask) {
 473         case IIO_CHAN_INFO_RAW:
 474                 err =  iproc_adc_do_read(indio_dev, chan->channel, &adc_data);
 475                 if (err < 0)
 476                         return err;
 477                 *val = adc_data;
 478                 return IIO_VAL_INT;
 479         case IIO_CHAN_INFO_SCALE:
 480                 switch (chan->type) {
 481                 case IIO_VOLTAGE:
 482                         *val = 1800;
 483                         *val2 = 10;
 484                         return IIO_VAL_FRACTIONAL_LOG2;
 485                 default:
 486                         return -EINVAL;
 487                 }
 488         default:
 489                 return -EINVAL;
 490         }
 491 }
 492
 493 static const struct iio_info iproc_adc_iio_info = {
 494         .read_raw = &iproc_adc_read_raw,
 495         .driver_module = THIS_MODULE,
 496 };
 497
 498 #define IPROC_ADC_CHANNEL(_index, _id) {                \
 499         .type = IIO_VOLTAGE,                            \
 500         .indexed = 1,                                   \
 501         .channel = _index,                              \
 502         .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),   \
 503         .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
 504         .datasheet_name = _id,                          \
 505 }
 506
 507 static const struct iio_chan_spec iproc_adc_iio_channels[] = {
 508         IPROC_ADC_CHANNEL(0, "adc0"),
 509         IPROC_ADC_CHANNEL(1, "adc1"),
 510         IPROC_ADC_CHANNEL(2, "adc2"),
 511         IPROC_ADC_CHANNEL(3, "adc3"),
 512         IPROC_ADC_CHANNEL(4, "adc4"),
 513         IPROC_ADC_CHANNEL(5, "adc5"),
 514         IPROC_ADC_CHANNEL(6, "adc6"),
 515         IPROC_ADC_CHANNEL(7, "adc7"),
 516 };
 517
 518 static int iproc_adc_probe(struct platform_device *pdev)
 519 {
 520         struct iproc_adc_priv *adc_priv;
 521         struct iio_dev *indio_dev = NULL;
 522         int ret;
 523
 524         indio_dev = devm_iio_device_alloc(&pdev->dev,
 525                                         sizeof(*adc_priv));
 526         if (!indio_dev) {
 527                 dev_err(&pdev->dev, "failed to allocate iio device\n");
 528                 return -ENOMEM;
 529         }
 530
 531         adc_priv = iio_priv(indio_dev);
 532         platform_set_drvdata(pdev, indio_dev);
 533
 534         mutex_init(&adc_priv->mutex);
 535
 536         init_completion(&adc_priv->completion);
 537
 538         adc_priv->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
 539                            "adc-syscon");
 540         if (IS_ERR(adc_priv->regmap)) {
 541                 dev_err(&pdev->dev, "failed to get handle for tsc syscon\n");
 542                 ret = PTR_ERR(adc_priv->regmap);
 543                 return ret;
 544         }
 545
 546         adc_priv->adc_clk = devm_clk_get(&pdev->dev, "tsc_clk");
 547         if (IS_ERR(adc_priv->adc_clk)) {
 548                 dev_err(&pdev->dev,
 549                         "failed getting clock tsc_clk\n");
 550                 ret = PTR_ERR(adc_priv->adc_clk);
 551                 return ret;
 552         }
 553
 554         adc_priv->irqno = platform_get_irq(pdev, 0);
 555         if (adc_priv->irqno <= 0) {
 556                 dev_err(&pdev->dev, "platform_get_irq failed\n");
 557                 ret = -ENODEV;
 558                 return ret;
 559         }
 560
 561         ret = regmap_update_bits(adc_priv->regmap, IPROC_REGCTL2,
 562                                 IPROC_ADC_AUXIN_SCAN_ENA, 0);
 563         if (ret) {
 564                 dev_err(&pdev->dev, "failed to write IPROC_REGCTL2 %d\n", ret);
 565                 return ret;
 566         }
 567
 568         ret = devm_request_threaded_irq(&pdev->dev, adc_priv->irqno,
 569                                 iproc_adc_interrupt_thread,
 570                                 iproc_adc_interrupt_handler,
 571                                 IRQF_SHARED, "iproc-adc", indio_dev);
 572         if (ret) {
 573                 dev_err(&pdev->dev, "request_irq error %d\n", ret);
 574                 return ret;
 575         }
 576
 577         ret = clk_prepare_enable(adc_priv->adc_clk);
 578         if (ret) {
 579                 dev_err(&pdev->dev,
 580                         "clk_prepare_enable failed %d\n", ret);
 581                 return ret;
 582         }
 583
 584         ret = iproc_adc_enable(indio_dev);
 585         if (ret) {
 586                 dev_err(&pdev->dev, "failed to enable adc %d\n", ret);
 587                 goto err_adc_enable;
 588         }
 589
 590         indio_dev->name = "iproc-static-adc";
 591         indio_dev->dev.parent = &pdev->dev;
 592         indio_dev->dev.of_node = pdev->dev.of_node;
 593         indio_dev->info = &iproc_adc_iio_info;
 594         indio_dev->modes = INDIO_DIRECT_MODE;
 595         indio_dev->channels = iproc_adc_iio_channels;
 596         indio_dev->num_channels = ARRAY_SIZE(iproc_adc_iio_channels);
 597
 598         ret = iio_device_register(indio_dev);
 599         if (ret) {
 600                 dev_err(&pdev->dev, "iio_device_register failed:err %d\n", ret);
 601                 goto err_clk;
 602         }
 603
 604         return 0;
 605
 606 err_clk:
 607         iproc_adc_disable(indio_dev);
 608 err_adc_enable:
 609         clk_disable_unprepare(adc_priv->adc_clk);
 610
 611         return ret;
 612 }
 613
 614 static int iproc_adc_remove(struct platform_device *pdev)
 615 {
 616         struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 617         struct iproc_adc_priv *adc_priv = iio_priv(indio_dev);
 618
 619         iio_device_unregister(indio_dev);
 620         iproc_adc_disable(indio_dev);
 621         clk_disable_unprepare(adc_priv->adc_clk);
 622
 623         return 0;
 624 }
 625
 626 static const struct of_device_id iproc_adc_of_match[] = {
 627         {.compatible = "brcm,iproc-static-adc", },
 628         { },
 629 };
 630 MODULE_DEVICE_TABLE(of, iproc_adc_of_match);
 631
 632 static struct platform_driver iproc_adc_driver = {
 633         .probe  = iproc_adc_probe,
 634         .remove = iproc_adc_remove,
 635         .driver = {
 636                 .name   = "iproc-static-adc",
 637                 .of_match_table = of_match_ptr(iproc_adc_of_match),
 638         },
 639 };
 640 module_platform_driver(iproc_adc_driver);
 641
 642 MODULE_DESCRIPTION("Broadcom iProc ADC controller driver");
 643 MODULE_AUTHOR("Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>");
 644 MODULE_LICENSE("GPL v2");