sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / iio / adc / ti-adc128s052.c
blob89dfbd31be5c88569655a13c6fc72d70d6635e12
1 /*
2 * Copyright (C) 2014 Angelo Compagnucci <angelo.compagnucci@gmail.com>
4 * Driver for Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip.
5 * Datasheets can be found here:
6 * http://www.ti.com/lit/ds/symlink/adc128s052.pdf
7 * http://www.ti.com/lit/ds/symlink/adc122s021.pdf
8 * http://www.ti.com/lit/ds/symlink/adc124s021.pdf
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/err.h>
16 #include <linux/spi/spi.h>
17 #include <linux/module.h>
18 #include <linux/iio/iio.h>
19 #include <linux/regulator/consumer.h>
21 struct adc128_configuration {
22 const struct iio_chan_spec *channels;
23 u8 num_channels;
26 struct adc128 {
27 struct spi_device *spi;
29 struct regulator *reg;
30 struct mutex lock;
32 u8 buffer[2] ____cacheline_aligned;
35 static int adc128_adc_conversion(struct adc128 *adc, u8 channel)
37 int ret;
39 mutex_lock(&adc->lock);
41 adc->buffer[0] = channel << 3;
42 adc->buffer[1] = 0;
44 ret = spi_write(adc->spi, &adc->buffer, 2);
45 if (ret < 0) {
46 mutex_unlock(&adc->lock);
47 return ret;
50 ret = spi_read(adc->spi, &adc->buffer, 2);
52 mutex_unlock(&adc->lock);
54 if (ret < 0)
55 return ret;
57 return ((adc->buffer[0] << 8 | adc->buffer[1]) & 0xFFF);
60 static int adc128_read_raw(struct iio_dev *indio_dev,
61 struct iio_chan_spec const *channel, int *val,
62 int *val2, long mask)
64 struct adc128 *adc = iio_priv(indio_dev);
65 int ret;
67 switch (mask) {
68 case IIO_CHAN_INFO_RAW:
70 ret = adc128_adc_conversion(adc, channel->channel);
71 if (ret < 0)
72 return ret;
74 *val = ret;
75 return IIO_VAL_INT;
77 case IIO_CHAN_INFO_SCALE:
79 ret = regulator_get_voltage(adc->reg);
80 if (ret < 0)
81 return ret;
83 *val = ret / 1000;
84 *val2 = 12;
85 return IIO_VAL_FRACTIONAL_LOG2;
87 default:
88 return -EINVAL;
93 #define ADC128_VOLTAGE_CHANNEL(num) \
94 { \
95 .type = IIO_VOLTAGE, \
96 .indexed = 1, \
97 .channel = (num), \
98 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
99 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
102 static const struct iio_chan_spec adc128s052_channels[] = {
103 ADC128_VOLTAGE_CHANNEL(0),
104 ADC128_VOLTAGE_CHANNEL(1),
105 ADC128_VOLTAGE_CHANNEL(2),
106 ADC128_VOLTAGE_CHANNEL(3),
107 ADC128_VOLTAGE_CHANNEL(4),
108 ADC128_VOLTAGE_CHANNEL(5),
109 ADC128_VOLTAGE_CHANNEL(6),
110 ADC128_VOLTAGE_CHANNEL(7),
113 static const struct iio_chan_spec adc122s021_channels[] = {
114 ADC128_VOLTAGE_CHANNEL(0),
115 ADC128_VOLTAGE_CHANNEL(1),
118 static const struct iio_chan_spec adc124s021_channels[] = {
119 ADC128_VOLTAGE_CHANNEL(0),
120 ADC128_VOLTAGE_CHANNEL(1),
121 ADC128_VOLTAGE_CHANNEL(2),
122 ADC128_VOLTAGE_CHANNEL(3),
125 static const struct adc128_configuration adc128_config[] = {
126 { adc128s052_channels, ARRAY_SIZE(adc128s052_channels) },
127 { adc122s021_channels, ARRAY_SIZE(adc122s021_channels) },
128 { adc124s021_channels, ARRAY_SIZE(adc124s021_channels) },
131 static const struct iio_info adc128_info = {
132 .read_raw = adc128_read_raw,
133 .driver_module = THIS_MODULE,
136 static int adc128_probe(struct spi_device *spi)
138 struct iio_dev *indio_dev;
139 struct adc128 *adc;
140 int config = spi_get_device_id(spi)->driver_data;
141 int ret;
143 indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
144 if (!indio_dev)
145 return -ENOMEM;
147 adc = iio_priv(indio_dev);
148 adc->spi = spi;
150 spi_set_drvdata(spi, indio_dev);
152 indio_dev->dev.parent = &spi->dev;
153 indio_dev->dev.of_node = spi->dev.of_node;
154 indio_dev->name = spi_get_device_id(spi)->name;
155 indio_dev->modes = INDIO_DIRECT_MODE;
156 indio_dev->info = &adc128_info;
158 indio_dev->channels = adc128_config[config].channels;
159 indio_dev->num_channels = adc128_config[config].num_channels;
161 adc->reg = devm_regulator_get(&spi->dev, "vref");
162 if (IS_ERR(adc->reg))
163 return PTR_ERR(adc->reg);
165 ret = regulator_enable(adc->reg);
166 if (ret < 0)
167 return ret;
169 mutex_init(&adc->lock);
171 ret = iio_device_register(indio_dev);
173 return ret;
176 static int adc128_remove(struct spi_device *spi)
178 struct iio_dev *indio_dev = spi_get_drvdata(spi);
179 struct adc128 *adc = iio_priv(indio_dev);
181 iio_device_unregister(indio_dev);
182 regulator_disable(adc->reg);
184 return 0;
187 static const struct of_device_id adc128_of_match[] = {
188 { .compatible = "ti,adc128s052", },
189 { .compatible = "ti,adc122s021", },
190 { .compatible = "ti,adc124s021", },
191 { /* sentinel */ },
193 MODULE_DEVICE_TABLE(of, adc128_of_match);
195 static const struct spi_device_id adc128_id[] = {
196 { "adc128s052", 0}, /* index into adc128_config */
197 { "adc122s021", 1},
198 { "adc124s021", 2},
201 MODULE_DEVICE_TABLE(spi, adc128_id);
203 static struct spi_driver adc128_driver = {
204 .driver = {
205 .name = "adc128s052",
206 .of_match_table = of_match_ptr(adc128_of_match),
208 .probe = adc128_probe,
209 .remove = adc128_remove,
210 .id_table = adc128_id,
212 module_spi_driver(adc128_driver);
214 MODULE_AUTHOR("Angelo Compagnucci <angelo.compagnucci@gmail.com>");
215 MODULE_DESCRIPTION("Texas Instruments ADC128S052");
216 MODULE_LICENSE("GPL v2");