drivers/iio/common/ssp_sensors/ssp.h

   1 /*
   2  *  Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
   3  *
   4  *  This program is free software; you can redistribute it and/or modify
   5  *  it under the terms of the GNU General Public License as published by
   6  *  the Free Software Foundation; either version 2 of the License, or
   7  *  (at your option) any later version.
   8  *
   9  *  This program is distributed in the hope that it will be useful,
  10  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  *  GNU General Public License for more details.
  13  *
  14  */
  15
  16 #ifndef __SSP_SENSORHUB_H__
  17 #define __SSP_SENSORHUB_H__
  18
  19 #include <linux/delay.h>
  20 #include <linux/gpio.h>
  21 #include <linux/iio/common/ssp_sensors.h>
  22 #include <linux/iio/iio.h>
  23 #include <linux/spi/spi.h>
  24
  25 #define SSP_DEVICE_ID           0x55
  26
  27 #ifdef SSP_DBG
  28 #define ssp_dbg(format, ...) pr_info("[SSP] "format, ##__VA_ARGS__)
  29 #else
  30 #define ssp_dbg(format, ...)
  31 #endif
  32
  33 #define SSP_SW_RESET_TIME               3000
  34 /* Sensor polling in ms */
  35 #define SSP_DEFAULT_POLLING_DELAY       200
  36 #define SSP_DEFAULT_RETRIES             3
  37 #define SSP_DATA_PACKET_SIZE            960
  38 #define SSP_HEADER_BUFFER_SIZE          4
  39
  40 enum {
  41         SSP_KERNEL_BINARY = 0,
  42         SSP_KERNEL_CRASHED_BINARY,
  43 };
  44
  45 enum {
  46         SSP_INITIALIZATION_STATE = 0,
  47         SSP_NO_SENSOR_STATE,
  48         SSP_ADD_SENSOR_STATE,
  49         SSP_RUNNING_SENSOR_STATE,
  50 };
  51
  52 /* Firmware download STATE */
  53 enum {
  54         SSP_FW_DL_STATE_FAIL = -1,
  55         SSP_FW_DL_STATE_NONE = 0,
  56         SSP_FW_DL_STATE_NEED_TO_SCHEDULE,
  57         SSP_FW_DL_STATE_SCHEDULED,
  58         SSP_FW_DL_STATE_DOWNLOADING,
  59         SSP_FW_DL_STATE_SYNC,
  60         SSP_FW_DL_STATE_DONE,
  61 };
  62
  63 #define SSP_INVALID_REVISION                    99999
  64 #define SSP_INVALID_REVISION2                   0xffffff
  65
  66 /* AP -> SSP Instruction */
  67 #define SSP_MSG2SSP_INST_BYPASS_SENSOR_ADD      0xa1
  68 #define SSP_MSG2SSP_INST_BYPASS_SENSOR_RM       0xa2
  69 #define SSP_MSG2SSP_INST_REMOVE_ALL             0xa3
  70 #define SSP_MSG2SSP_INST_CHANGE_DELAY           0xa4
  71 #define SSP_MSG2SSP_INST_LIBRARY_ADD            0xb1
  72 #define SSP_MSG2SSP_INST_LIBRARY_REMOVE         0xb2
  73 #define SSP_MSG2SSP_INST_LIB_NOTI               0xb4
  74 #define SSP_MSG2SSP_INST_LIB_DATA               0xc1
  75
  76 #define SSP_MSG2SSP_AP_MCU_SET_GYRO_CAL         0xcd
  77 #define SSP_MSG2SSP_AP_MCU_SET_ACCEL_CAL        0xce
  78 #define SSP_MSG2SSP_AP_STATUS_SHUTDOWN          0xd0
  79 #define SSP_MSG2SSP_AP_STATUS_WAKEUP            0xd1
  80 #define SSP_MSG2SSP_AP_STATUS_SLEEP             0xd2
  81 #define SSP_MSG2SSP_AP_STATUS_RESUME            0xd3
  82 #define SSP_MSG2SSP_AP_STATUS_SUSPEND           0xd4
  83 #define SSP_MSG2SSP_AP_STATUS_RESET             0xd5
  84 #define SSP_MSG2SSP_AP_STATUS_POW_CONNECTED     0xd6
  85 #define SSP_MSG2SSP_AP_STATUS_POW_DISCONNECTED  0xd7
  86 #define SSP_MSG2SSP_AP_TEMPHUMIDITY_CAL_DONE    0xda
  87 #define SSP_MSG2SSP_AP_MCU_SET_DUMPMODE         0xdb
  88 #define SSP_MSG2SSP_AP_MCU_DUMP_CHECK           0xdc
  89 #define SSP_MSG2SSP_AP_MCU_BATCH_FLUSH          0xdd
  90 #define SSP_MSG2SSP_AP_MCU_BATCH_COUNT          0xdf
  91
  92 #define SSP_MSG2SSP_AP_WHOAMI                           0x0f
  93 #define SSP_MSG2SSP_AP_FIRMWARE_REV                     0xf0
  94 #define SSP_MSG2SSP_AP_SENSOR_FORMATION                 0xf1
  95 #define SSP_MSG2SSP_AP_SENSOR_PROXTHRESHOLD             0xf2
  96 #define SSP_MSG2SSP_AP_SENSOR_BARCODE_EMUL              0xf3
  97 #define SSP_MSG2SSP_AP_SENSOR_SCANNING                  0xf4
  98 #define SSP_MSG2SSP_AP_SET_MAGNETIC_HWOFFSET            0xf5
  99 #define SSP_MSG2SSP_AP_GET_MAGNETIC_HWOFFSET            0xf6
 100 #define SSP_MSG2SSP_AP_SENSOR_GESTURE_CURRENT           0xf7
 101 #define SSP_MSG2SSP_AP_GET_THERM                        0xf8
 102 #define SSP_MSG2SSP_AP_GET_BIG_DATA                     0xf9
 103 #define SSP_MSG2SSP_AP_SET_BIG_DATA                     0xfa
 104 #define SSP_MSG2SSP_AP_START_BIG_DATA                   0xfb
 105 #define SSP_MSG2SSP_AP_SET_MAGNETIC_STATIC_MATRIX       0xfd
 106 #define SSP_MSG2SSP_AP_SENSOR_TILT                      0xea
 107 #define SSP_MSG2SSP_AP_MCU_SET_TIME                     0xfe
 108 #define SSP_MSG2SSP_AP_MCU_GET_TIME                     0xff
 109
 110 #define SSP_MSG2SSP_AP_FUSEROM                          0x01
 111
 112 /* voice data */
 113 #define SSP_TYPE_WAKE_UP_VOICE_SERVICE                  0x01
 114 #define SSP_TYPE_WAKE_UP_VOICE_SOUND_SOURCE_AM          0x01
 115 #define SSP_TYPE_WAKE_UP_VOICE_SOUND_SOURCE_GRAMMER     0x02
 116
 117 /* Factory Test */
 118 #define SSP_ACCELEROMETER_FACTORY                       0x80
 119 #define SSP_GYROSCOPE_FACTORY                           0x81
 120 #define SSP_GEOMAGNETIC_FACTORY                         0x82
 121 #define SSP_PRESSURE_FACTORY                            0x85
 122 #define SSP_GESTURE_FACTORY                             0x86
 123 #define SSP_TEMPHUMIDITY_CRC_FACTORY                    0x88
 124 #define SSP_GYROSCOPE_TEMP_FACTORY                      0x8a
 125 #define SSP_GYROSCOPE_DPS_FACTORY                       0x8b
 126 #define SSP_MCU_FACTORY                                 0x8c
 127 #define SSP_MCU_SLEEP_FACTORY                           0x8d
 128
 129 /* SSP -> AP ACK about write CMD */
 130 #define SSP_MSG_ACK             0x80    /* ACK from SSP to AP */
 131 #define SSP_MSG_NAK             0x70    /* NAK from SSP to AP */
 132
 133 struct ssp_sensorhub_info {
 134         char *fw_name;
 135         char *fw_crashed_name;
 136         unsigned int fw_rev;
 137         const u8 * const mag_table;
 138         const unsigned int mag_length;
 139 };
 140
 141 /* ssp_msg options bit */
 142 #define SSP_RW          0
 143 #define SSP_INDEX       3
 144
 145 #define SSP_AP2HUB_READ         0
 146 #define SSP_AP2HUB_WRITE        1
 147 #define SSP_HUB2AP_WRITE        2
 148 #define SSP_AP2HUB_READY        3
 149 #define SSP_AP2HUB_RETURN       4
 150
 151 /**
 152  * struct ssp_data - ssp platformdata structure
 153  * @spi:                spi device
 154  * @sensorhub_info:     info about sensorhub board specific features
 155  * @wdt_timer:          watchdog timer
 156  * @work_wdt:           watchdog work
 157  * @work_firmware:      firmware upgrade work queue
 158  * @work_refresh:       refresh work queue for reset request from MCU
 159  * @shut_down:          shut down flag
 160  * @mcu_dump_mode:      mcu dump mode for debug
 161  * @time_syncing:       time syncing indication flag
 162  * @timestamp:          previous time in ns calculated for time syncing
 163  * @check_status:       status table for each sensor
 164  * @com_fail_cnt:       communication fail count
 165  * @reset_cnt:          reset count
 166  * @timeout_cnt:        timeout count
 167  * @available_sensors:  available sensors seen by sensorhub (bit array)
 168  * @cur_firm_rev:       cached current firmware revision
 169  * @last_resume_state:  last AP resume/suspend state used to handle the PM
 170  *                      state of ssp
 171  * @last_ap_state:      (obsolete) sleep notification for MCU
 172  * @sensor_enable:      sensor enable mask
 173  * @delay_buf:          data acquisition intervals table
 174  * @batch_latency_buf:  yet unknown but existing in communication protocol
 175  * @batch_opt_buf:      yet unknown but existing in communication protocol
 176  * @accel_position:     yet unknown but existing in communication protocol
 177  * @mag_position:       yet unknown but existing in communication protocol
 178  * @fw_dl_state:        firmware download state
 179  * @comm_lock:          lock protecting the handshake
 180  * @pending_lock:       lock protecting pending list and completion
 181  * @mcu_reset_gpio:     mcu reset line
 182  * @ap_mcu_gpio:        ap to mcu gpio line
 183  * @mcu_ap_gpio:        mcu to ap gpio line
 184  * @pending_list:       pending list for messages queued to be sent/read
 185  * @sensor_devs:        registered IIO devices table
 186  * @enable_refcount:    enable reference count for wdt (watchdog timer)
 187  * @header_buffer:      cache aligned buffer for packet header
 188  */
 189 struct ssp_data {
 190         struct spi_device *spi;
 191         struct ssp_sensorhub_info *sensorhub_info;
 192         struct timer_list wdt_timer;
 193         struct work_struct work_wdt;
 194         struct delayed_work work_refresh;
 195
 196         bool shut_down;
 197         bool mcu_dump_mode;
 198         bool time_syncing;
 199         int64_t timestamp;
 200
 201         int check_status[SSP_SENSOR_MAX];
 202
 203         unsigned int com_fail_cnt;
 204         unsigned int reset_cnt;
 205         unsigned int timeout_cnt;
 206
 207         unsigned int available_sensors;
 208         unsigned int cur_firm_rev;
 209
 210         char last_resume_state;
 211         char last_ap_state;
 212
 213         unsigned int sensor_enable;
 214         u32 delay_buf[SSP_SENSOR_MAX];
 215         s32 batch_latency_buf[SSP_SENSOR_MAX];
 216         s8 batch_opt_buf[SSP_SENSOR_MAX];
 217
 218         int accel_position;
 219         int mag_position;
 220         int fw_dl_state;
 221
 222         struct mutex comm_lock;
 223         struct mutex pending_lock;
 224
 225         int mcu_reset_gpio;
 226         int ap_mcu_gpio;
 227         int mcu_ap_gpio;
 228
 229         struct list_head pending_list;
 230
 231         struct iio_dev *sensor_devs[SSP_SENSOR_MAX];
 232         atomic_t enable_refcount;
 233
 234         __le16 header_buffer[SSP_HEADER_BUFFER_SIZE / sizeof(__le16)]
 235                 ____cacheline_aligned;
 236 };
 237
 238 void ssp_clean_pending_list(struct ssp_data *data);
 239
 240 int ssp_command(struct ssp_data *data, char command, int arg);
 241
 242 int ssp_send_instruction(struct ssp_data *data, u8 inst, u8 sensor_type,
 243                          u8 *send_buf, u8 length);
 244
 245 int ssp_irq_msg(struct ssp_data *data);
 246
 247 int ssp_get_chipid(struct ssp_data *data);
 248
 249 int ssp_set_magnetic_matrix(struct ssp_data *data);
 250
 251 unsigned int ssp_get_sensor_scanning_info(struct ssp_data *data);
 252
 253 unsigned int ssp_get_firmware_rev(struct ssp_data *data);
 254
 255 int ssp_queue_ssp_refresh_task(struct ssp_data *data, unsigned int delay);
 256
 257 #endif /* __SSP_SENSORHUB_H__ */