?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / iio / light / si1145.c
blob096034c126a456216df8024e7fad419b845fd272
1 /*
2 * si1145.c - Support for Silabs SI1132 and SI1141/2/3/5/6/7 combined ambient
3 * light, UV index and proximity sensors
4 *
5 * Copyright 2014-16 Peter Meerwald-Stadler <pmeerw@pmeerw.net>
6 * Copyright 2016 Crestez Dan Leonard <leonard.crestez@intel.com>
7 *
8 * This file is subject to the terms and conditions of version 2 of
9 * the GNU General Public License. See the file COPYING in the main
10 * directory of this archive for more details.
11 *
12 * SI1132 (7-bit I2C slave address 0x60)
13 * SI1141/2/3 (7-bit I2C slave address 0x5a)
14 * SI1145/6/6 (7-bit I2C slave address 0x60)
15 */
16
17 #include <linux/module.h>
18 #include <linux/i2c.h>
19 #include <linux/err.h>
20 #include <linux/slab.h>
21 #include <linux/delay.h>
22 #include <linux/irq.h>
23 #include <linux/gpio.h>
24
25 #include <linux/iio/iio.h>
26 #include <linux/iio/sysfs.h>
27 #include <linux/iio/trigger.h>
28 #include <linux/iio/trigger_consumer.h>
29 #include <linux/iio/triggered_buffer.h>
30 #include <linux/iio/buffer.h>
31 #include <linux/util_macros.h>
32
33 #define SI1145_REG_PART_ID 0x00
34 #define SI1145_REG_REV_ID 0x01
35 #define SI1145_REG_SEQ_ID 0x02
36 #define SI1145_REG_INT_CFG 0x03
37 #define SI1145_REG_IRQ_ENABLE 0x04
38 #define SI1145_REG_IRQ_MODE 0x05
39 #define SI1145_REG_HW_KEY 0x07
40 #define SI1145_REG_MEAS_RATE 0x08
41 #define SI1145_REG_PS_LED21 0x0f
42 #define SI1145_REG_PS_LED3 0x10
43 #define SI1145_REG_UCOEF1 0x13
44 #define SI1145_REG_UCOEF2 0x14
45 #define SI1145_REG_UCOEF3 0x15
46 #define SI1145_REG_UCOEF4 0x16
47 #define SI1145_REG_PARAM_WR 0x17
48 #define SI1145_REG_COMMAND 0x18
49 #define SI1145_REG_RESPONSE 0x20
50 #define SI1145_REG_IRQ_STATUS 0x21
51 #define SI1145_REG_ALSVIS_DATA 0x22
52 #define SI1145_REG_ALSIR_DATA 0x24
53 #define SI1145_REG_PS1_DATA 0x26
54 #define SI1145_REG_PS2_DATA 0x28
55 #define SI1145_REG_PS3_DATA 0x2a
56 #define SI1145_REG_AUX_DATA 0x2c
57 #define SI1145_REG_PARAM_RD 0x2e
58 #define SI1145_REG_CHIP_STAT 0x30
59
60 #define SI1145_UCOEF1_DEFAULT 0x7b
61 #define SI1145_UCOEF2_DEFAULT 0x6b
62 #define SI1145_UCOEF3_DEFAULT 0x01
63 #define SI1145_UCOEF4_DEFAULT 0x00
64
65 /* Helper to figure out PS_LED register / shift per channel */
66 #define SI1145_PS_LED_REG(ch) \
67 (((ch) == 2) ? SI1145_REG_PS_LED3 : SI1145_REG_PS_LED21)
68 #define SI1145_PS_LED_SHIFT(ch) \
69 (((ch) == 1) ? 4 : 0)
70
71 /* Parameter offsets */
72 #define SI1145_PARAM_CHLIST 0x01
73 #define SI1145_PARAM_PSLED12_SELECT 0x02
74 #define SI1145_PARAM_PSLED3_SELECT 0x03
75 #define SI1145_PARAM_PS_ENCODING 0x05
76 #define SI1145_PARAM_ALS_ENCODING 0x06
77 #define SI1145_PARAM_PS1_ADC_MUX 0x07
78 #define SI1145_PARAM_PS2_ADC_MUX 0x08
79 #define SI1145_PARAM_PS3_ADC_MUX 0x09
80 #define SI1145_PARAM_PS_ADC_COUNTER 0x0a
81 #define SI1145_PARAM_PS_ADC_GAIN 0x0b
82 #define SI1145_PARAM_PS_ADC_MISC 0x0c
83 #define SI1145_PARAM_ALS_ADC_MUX 0x0d
84 #define SI1145_PARAM_ALSIR_ADC_MUX 0x0e
85 #define SI1145_PARAM_AUX_ADC_MUX 0x0f
86 #define SI1145_PARAM_ALSVIS_ADC_COUNTER 0x10
87 #define SI1145_PARAM_ALSVIS_ADC_GAIN 0x11
88 #define SI1145_PARAM_ALSVIS_ADC_MISC 0x12
89 #define SI1145_PARAM_LED_RECOVERY 0x1c
90 #define SI1145_PARAM_ALSIR_ADC_COUNTER 0x1d
91 #define SI1145_PARAM_ALSIR_ADC_GAIN 0x1e
92 #define SI1145_PARAM_ALSIR_ADC_MISC 0x1f
93 #define SI1145_PARAM_ADC_OFFSET 0x1a
94
95 /* Channel enable masks for CHLIST parameter */
96 #define SI1145_CHLIST_EN_PS1 BIT(0)
97 #define SI1145_CHLIST_EN_PS2 BIT(1)
98 #define SI1145_CHLIST_EN_PS3 BIT(2)
99 #define SI1145_CHLIST_EN_ALSVIS BIT(4)
100 #define SI1145_CHLIST_EN_ALSIR BIT(5)
101 #define SI1145_CHLIST_EN_AUX BIT(6)
102 #define SI1145_CHLIST_EN_UV BIT(7)
103
104 /* Proximity measurement mode for ADC_MISC parameter */
105 #define SI1145_PS_ADC_MODE_NORMAL BIT(2)
106 /* Signal range mask for ADC_MISC parameter */
107 #define SI1145_ADC_MISC_RANGE BIT(5)
108
109 /* Commands for REG_COMMAND */
110 #define SI1145_CMD_NOP 0x00
111 #define SI1145_CMD_RESET 0x01
112 #define SI1145_CMD_PS_FORCE 0x05
113 #define SI1145_CMD_ALS_FORCE 0x06
114 #define SI1145_CMD_PSALS_FORCE 0x07
115 #define SI1145_CMD_PS_PAUSE 0x09
116 #define SI1145_CMD_ALS_PAUSE 0x0a
117 #define SI1145_CMD_PSALS_PAUSE 0x0b
118 #define SI1145_CMD_PS_AUTO 0x0d
119 #define SI1145_CMD_ALS_AUTO 0x0e
120 #define SI1145_CMD_PSALS_AUTO 0x0f
121 #define SI1145_CMD_PARAM_QUERY 0x80
122 #define SI1145_CMD_PARAM_SET 0xa0
123
124 #define SI1145_RSP_INVALID_SETTING 0x80
125 #define SI1145_RSP_COUNTER_MASK 0x0F
126
127 /* Minimum sleep after each command to ensure it's received */
128 #define SI1145_COMMAND_MINSLEEP_MS 5
129 /* Return -ETIMEDOUT after this long */
130 #define SI1145_COMMAND_TIMEOUT_MS 25
131
132 /* Interrupt configuration masks for INT_CFG register */
133 #define SI1145_INT_CFG_OE BIT(0) /* enable interrupt */
134 #define SI1145_INT_CFG_MODE BIT(1) /* auto reset interrupt pin */
135
136 /* Interrupt enable masks for IRQ_ENABLE register */
137 #define SI1145_MASK_ALL_IE (BIT(4) | BIT(3) | BIT(2) | BIT(0))
138
139 #define SI1145_MUX_TEMP 0x65
140 #define SI1145_MUX_VDD 0x75
141
142 /* Proximity LED current; see Table 2 in datasheet */
143 #define SI1145_LED_CURRENT_45mA 0x04
144
145 enum {
146 SI1132,
147 SI1141,
148 SI1142,
149 SI1143,
150 SI1145,
151 SI1146,
152 SI1147,
153 };
154
155 struct si1145_part_info {
156 u8 part;
157 const struct iio_info *iio_info;
158 const struct iio_chan_spec *channels;
159 unsigned int num_channels;
160 unsigned int num_leds;
161 bool uncompressed_meas_rate;
162 };
163
164 /**
165 * struct si1145_data - si1145 chip state data
166 * @client: I2C client
167 * @lock: mutex to protect shared state.
168 * @cmdlock: Low-level mutex to protect command execution only
169 * @rsp_seq: Next expected response number or -1 if counter reset required
170 * @scan_mask: Saved scan mask to avoid duplicate set_chlist
171 * @autonomous: If automatic measurements are active (for buffer support)
172 * @part_info: Part information
173 * @trig: Pointer to iio trigger
174 * @meas_rate: Value of MEAS_RATE register. Only set in HW in auto mode
175 */
176 struct si1145_data {
177 struct i2c_client *client;
178 struct mutex lock;
179 struct mutex cmdlock;
180 int rsp_seq;
181 const struct si1145_part_info *part_info;
182 unsigned long scan_mask;
183 bool autonomous;
184 struct iio_trigger *trig;
185 int meas_rate;
186 };
187
188 /**
189 * __si1145_command_reset() - Send CMD_NOP and wait for response 0
190 *
191 * Does not modify data->rsp_seq
192 *
193 * Return: 0 on success and -errno on error.
194 */
195 static int __si1145_command_reset(struct si1145_data *data)
196 {
197 struct device *dev = &data->client->dev;
198 unsigned long stop_jiffies;
199 int ret;
200
201 ret = i2c_smbus_write_byte_data(data->client, SI1145_REG_COMMAND,
202 SI1145_CMD_NOP);
203 if (ret < 0)
204 return ret;
205 msleep(SI1145_COMMAND_MINSLEEP_MS);
206
207 stop_jiffies = jiffies + SI1145_COMMAND_TIMEOUT_MS * HZ / 1000;
208 while (true) {
209 ret = i2c_smbus_read_byte_data(data->client,
210 SI1145_REG_RESPONSE);
211 if (ret <= 0)
212 return ret;
213 if (time_after(jiffies, stop_jiffies)) {
214 dev_warn(dev, "timeout on reset\n");
215 return -ETIMEDOUT;
216 }
217 msleep(SI1145_COMMAND_MINSLEEP_MS);
218 continue;
219 }
220 }
221
222 /**
223 * si1145_command() - Execute a command and poll the response register
224 *
225 * All conversion overflows are reported as -EOVERFLOW
226 * INVALID_SETTING is reported as -EINVAL
227 * Timeouts are reported as -ETIMEDOUT
228 *
229 * Return: 0 on success or -errno on failure
230 */
231 static int si1145_command(struct si1145_data *data, u8 cmd)
232 {
233 struct device *dev = &data->client->dev;
234 unsigned long stop_jiffies;
235 int ret;
236
237 mutex_lock(&data->cmdlock);
238
239 if (data->rsp_seq < 0) {
240 ret = __si1145_command_reset(data);
241 if (ret < 0) {
242 dev_err(dev, "failed to reset command counter, ret=%d\n",
243 ret);
244 goto out;
245 }
246 data->rsp_seq = 0;
247 }
248
249 ret = i2c_smbus_write_byte_data(data->client, SI1145_REG_COMMAND, cmd);
250 if (ret) {
251 dev_warn(dev, "failed to write command, ret=%d\n", ret);
252 goto out;
253 }
254 /* Sleep a little to ensure the command is received */
255 msleep(SI1145_COMMAND_MINSLEEP_MS);
256
257 stop_jiffies = jiffies + SI1145_COMMAND_TIMEOUT_MS * HZ / 1000;
258 while (true) {
259 ret = i2c_smbus_read_byte_data(data->client,
260 SI1145_REG_RESPONSE);
261 if (ret < 0) {
262 dev_warn(dev, "failed to read response, ret=%d\n", ret);
263 break;
264 }
265
266 if ((ret & ~SI1145_RSP_COUNTER_MASK) == 0) {
267 if (ret == data->rsp_seq) {
268 if (time_after(jiffies, stop_jiffies)) {
269 dev_warn(dev, "timeout on command %#02hhx\n",
270 cmd);
271 ret = -ETIMEDOUT;
272 break;
273 }
274 msleep(SI1145_COMMAND_MINSLEEP_MS);
275 continue;
276 }
277 if (ret == ((data->rsp_seq + 1) &
278 SI1145_RSP_COUNTER_MASK)) {
279 data->rsp_seq = ret;
280 ret = 0;
281 break;
282 }
283 dev_warn(dev, "unexpected response counter %d instead of %d\n",
284 ret, (data->rsp_seq + 1) &
285 SI1145_RSP_COUNTER_MASK);
286 ret = -EIO;
287 } else {
288 if (ret == SI1145_RSP_INVALID_SETTING) {
289 dev_warn(dev, "INVALID_SETTING error on command %#02hhx\n",
290 cmd);
291 ret = -EINVAL;
292 } else {
293 /* All overflows are treated identically */
294 dev_dbg(dev, "overflow, ret=%d, cmd=%#02hhx\n",
295 ret, cmd);
296 ret = -EOVERFLOW;
297 }
298 }
299
300 /* Force a counter reset next time */
301 data->rsp_seq = -1;
302 break;
303 }
304
305 out:
306 mutex_unlock(&data->cmdlock);
307
308 return ret;
309 }
310
311 static int si1145_param_update(struct si1145_data *data, u8 op, u8 param,
312 u8 value)
313 {
314 int ret;
315
316 ret = i2c_smbus_write_byte_data(data->client,
317 SI1145_REG_PARAM_WR, value);
318 if (ret < 0)
319 return ret;
320
321 return si1145_command(data, op | (param & 0x1F));
322 }
323
324 static int si1145_param_set(struct si1145_data *data, u8 param, u8 value)
325 {
326 return si1145_param_update(data, SI1145_CMD_PARAM_SET, param, value);
327 }
328
329 /* Set param. Returns negative errno or current value */
330 static int si1145_param_query(struct si1145_data *data, u8 param)
331 {
332 int ret;
333
334 ret = si1145_command(data, SI1145_CMD_PARAM_QUERY | (param & 0x1F));
335 if (ret < 0)
336 return ret;
337
338 return i2c_smbus_read_byte_data(data->client, SI1145_REG_PARAM_RD);
339 }
340
341 /* Expand 8 bit compressed value to 16 bit, see Silabs AN498 */
342 static u16 si1145_uncompress(u8 x)
343 {
344 u16 result = 0;
345 u8 exponent = 0;
346
347 if (x < 8)
348 return 0;
349
350 exponent = (x & 0xf0) >> 4;
351 result = 0x10 | (x & 0x0f);
352
353 if (exponent >= 4)
354 return result << (exponent - 4);
355 return result >> (4 - exponent);
356 }
357
358 /* Compress 16 bit value to 8 bit, see Silabs AN498 */
359 static u8 si1145_compress(u16 x)
360 {
361 u32 exponent = 0;
362 u32 significand = 0;
363 u32 tmp = x;
364
365 if (x == 0x0000)
366 return 0x00;
367 if (x == 0x0001)
368 return 0x08;
369
370 while (1) {
371 tmp >>= 1;
372 exponent += 1;
373 if (tmp == 1)
374 break;
375 }
376
377 if (exponent < 5) {
378 significand = x << (4 - exponent);
379 return (exponent << 4) | (significand & 0xF);
380 }
381
382 significand = x >> (exponent - 5);
383 if (significand & 1) {
384 significand += 2;
385 if (significand & 0x0040) {
386 exponent += 1;
387 significand >>= 1;
388 }
389 }
390
391 return (exponent << 4) | ((significand >> 1) & 0xF);
392 }
393
394 /* Write meas_rate in hardware */
395 static int si1145_set_meas_rate(struct si1145_data *data, int interval)
396 {
397 if (data->part_info->uncompressed_meas_rate)
398 return i2c_smbus_write_word_data(data->client,
399 SI1145_REG_MEAS_RATE, interval);
400 else
401 return i2c_smbus_write_byte_data(data->client,
402 SI1145_REG_MEAS_RATE, interval);
403 }
404
405 static int si1145_read_samp_freq(struct si1145_data *data, int *val, int *val2)
406 {
407 *val = 32000;
408 if (data->part_info->uncompressed_meas_rate)
409 *val2 = data->meas_rate;
410 else
411 *val2 = si1145_uncompress(data->meas_rate);
412 return IIO_VAL_FRACTIONAL;
413 }
414
415 /* Set the samp freq in driver private data */
416 static int si1145_store_samp_freq(struct si1145_data *data, int val)
417 {
418 int ret = 0;
419 int meas_rate;
420
421 if (val <= 0 || val > 32000)
422 return -ERANGE;
423 meas_rate = 32000 / val;
424
425 mutex_lock(&data->lock);
426 if (data->autonomous) {
427 ret = si1145_set_meas_rate(data, meas_rate);
428 if (ret)
429 goto out;
430 }
431 if (data->part_info->uncompressed_meas_rate)
432 data->meas_rate = meas_rate;
433 else
434 data->meas_rate = si1145_compress(meas_rate);
435
436 out:
437 mutex_unlock(&data->lock);
438
439 return ret;
440 }
441
442 static irqreturn_t si1145_trigger_handler(int irq, void *private)
443 {
444 struct iio_poll_func *pf = private;
445 struct iio_dev *indio_dev = pf->indio_dev;
446 struct si1145_data *data = iio_priv(indio_dev);
447 /*
448 * Maximum buffer size:
449 * 6*2 bytes channels data + 4 bytes alignment +
450 * 8 bytes timestamp
451 */
452 u8 buffer[24];
453 int i, j = 0;
454 int ret;
455 u8 irq_status = 0;
456
457 if (!data->autonomous) {
458 ret = si1145_command(data, SI1145_CMD_PSALS_FORCE);
459 if (ret < 0 && ret != -EOVERFLOW)
460 goto done;
461 } else {
462 irq_status = ret = i2c_smbus_read_byte_data(data->client,
463 SI1145_REG_IRQ_STATUS);
464 if (ret < 0)
465 goto done;
466 if (!(irq_status & SI1145_MASK_ALL_IE))
467 goto done;
468 }
469
470 for_each_set_bit(i, indio_dev->active_scan_mask,
471 indio_dev->masklength) {
472 int run = 1;
473
474 while (i + run < indio_dev->masklength) {
475 if (!test_bit(i + run, indio_dev->active_scan_mask))
476 break;
477 if (indio_dev->channels[i + run].address !=
478 indio_dev->channels[i].address + 2 * run)
479 break;
480 run++;
481 }
482
483 ret = i2c_smbus_read_i2c_block_data_or_emulated(
484 data->client, indio_dev->channels[i].address,
485 sizeof(u16) * run, &buffer[j]);
486 if (ret < 0)
487 goto done;
488 j += run * sizeof(u16);
489 i += run - 1;
490 }
491
492 if (data->autonomous) {
493 ret = i2c_smbus_write_byte_data(data->client,
494 SI1145_REG_IRQ_STATUS,
495 irq_status & SI1145_MASK_ALL_IE);
496 if (ret < 0)
497 goto done;
498 }
499
500 iio_push_to_buffers_with_timestamp(indio_dev, buffer,
501 iio_get_time_ns(indio_dev));
502
503 done:
504 iio_trigger_notify_done(indio_dev->trig);
505 return IRQ_HANDLED;
506 }
507
508 static int si1145_set_chlist(struct iio_dev *indio_dev, unsigned long scan_mask)
509 {
510 struct si1145_data *data = iio_priv(indio_dev);
511 u8 reg = 0, mux;
512 int ret;
513 int i;
514
515 /* channel list already set, no need to reprogram */
516 if (data->scan_mask == scan_mask)
517 return 0;
518
519 for_each_set_bit(i, &scan_mask, indio_dev->masklength) {
520 switch (indio_dev->channels[i].address) {
521 case SI1145_REG_ALSVIS_DATA:
522 reg |= SI1145_CHLIST_EN_ALSVIS;
523 break;
524 case SI1145_REG_ALSIR_DATA:
525 reg |= SI1145_CHLIST_EN_ALSIR;
526 break;
527 case SI1145_REG_PS1_DATA:
528 reg |= SI1145_CHLIST_EN_PS1;
529 break;
530 case SI1145_REG_PS2_DATA:
531 reg |= SI1145_CHLIST_EN_PS2;
532 break;
533 case SI1145_REG_PS3_DATA:
534 reg |= SI1145_CHLIST_EN_PS3;
535 break;
536 case SI1145_REG_AUX_DATA:
537 switch (indio_dev->channels[i].type) {
538 case IIO_UVINDEX:
539 reg |= SI1145_CHLIST_EN_UV;
540 break;
541 default:
542 reg |= SI1145_CHLIST_EN_AUX;
543 if (indio_dev->channels[i].type == IIO_TEMP)
544 mux = SI1145_MUX_TEMP;
545 else
546 mux = SI1145_MUX_VDD;
547 ret = si1145_param_set(data,
548 SI1145_PARAM_AUX_ADC_MUX, mux);
549 if (ret < 0)
550 return ret;
551
552 break;
553 }
554 }
555 }
556
557 data->scan_mask = scan_mask;
558 ret = si1145_param_set(data, SI1145_PARAM_CHLIST, reg);
559
560 return ret < 0 ? ret : 0;
561 }
562
563 static int si1145_measure(struct iio_dev *indio_dev,
564 struct iio_chan_spec const *chan)
565 {
566 struct si1145_data *data = iio_priv(indio_dev);
567 u8 cmd;
568 int ret;
569
570 ret = si1145_set_chlist(indio_dev, BIT(chan->scan_index));
571 if (ret < 0)
572 return ret;
573
574 cmd = (chan->type == IIO_PROXIMITY) ? SI1145_CMD_PS_FORCE :
575 SI1145_CMD_ALS_FORCE;
576 ret = si1145_command(data, cmd);
577 if (ret < 0 && ret != -EOVERFLOW)
578 return ret;
579
580 return i2c_smbus_read_word_data(data->client, chan->address);
581 }
582
583 /*
584 * Conversion between iio scale and ADC_GAIN values
585 * These could be further adjusted but proximity/intensity are dimensionless
586 */
587 static const int si1145_proximity_scale_available[] = {
588 128, 64, 32, 16, 8, 4};
589 static const int si1145_intensity_scale_available[] = {
590 128, 64, 32, 16, 8, 4, 2, 1};
591 static IIO_CONST_ATTR(in_proximity_scale_available,
592 "128 64 32 16 8 4");
593 static IIO_CONST_ATTR(in_intensity_scale_available,
594 "128 64 32 16 8 4 2 1");
595 static IIO_CONST_ATTR(in_intensity_ir_scale_available,
596 "128 64 32 16 8 4 2 1");
597
598 static int si1145_scale_from_adcgain(int regval)
599 {
600 return 128 >> regval;
601 }
602
603 static int si1145_proximity_adcgain_from_scale(int val, int val2)
604 {
605 val = find_closest_descending(val, si1145_proximity_scale_available,
606 ARRAY_SIZE(si1145_proximity_scale_available));
607 if (val < 0 || val > 5 || val2 != 0)
608 return -EINVAL;
609
610 return val;
611 }
612
613 static int si1145_intensity_adcgain_from_scale(int val, int val2)
614 {
615 val = find_closest_descending(val, si1145_intensity_scale_available,
616 ARRAY_SIZE(si1145_intensity_scale_available));
617 if (val < 0 || val > 7 || val2 != 0)
618 return -EINVAL;
619
620 return val;
621 }
622
623 static int si1145_read_raw(struct iio_dev *indio_dev,
624 struct iio_chan_spec const *chan,
625 int *val, int *val2, long mask)
626 {
627 struct si1145_data *data = iio_priv(indio_dev);
628 int ret;
629 u8 reg;
630
631 switch (mask) {
632 case IIO_CHAN_INFO_RAW:
633 switch (chan->type) {
634 case IIO_INTENSITY:
635 case IIO_PROXIMITY:
636 case IIO_VOLTAGE:
637 case IIO_TEMP:
638 case IIO_UVINDEX:
639 ret = iio_device_claim_direct_mode(indio_dev);
640 if (ret)
641 return ret;
642 ret = si1145_measure(indio_dev, chan);
643 iio_device_release_direct_mode(indio_dev);
644
645 if (ret < 0)
646 return ret;
647
648 *val = ret;
649
650 return IIO_VAL_INT;
651 case IIO_CURRENT:
652 ret = i2c_smbus_read_byte_data(data->client,
653 SI1145_PS_LED_REG(chan->channel));
654 if (ret < 0)
655 return ret;
656
657 *val = (ret >> SI1145_PS_LED_SHIFT(chan->channel))
658 & 0x0f;
659
660 return IIO_VAL_INT;
661 default:
662 return -EINVAL;
663 }
664 case IIO_CHAN_INFO_SCALE:
665 switch (chan->type) {
666 case IIO_PROXIMITY:
667 reg = SI1145_PARAM_PS_ADC_GAIN;
668 break;
669 case IIO_INTENSITY:
670 if (chan->channel2 == IIO_MOD_LIGHT_IR)
671 reg = SI1145_PARAM_ALSIR_ADC_GAIN;
672 else
673 reg = SI1145_PARAM_ALSVIS_ADC_GAIN;
674 break;
675 case IIO_TEMP:
676 *val = 28;
677 *val2 = 571429;
678 return IIO_VAL_INT_PLUS_MICRO;
679 case IIO_UVINDEX:
680 *val = 0;
681 *val2 = 10000;
682 return IIO_VAL_INT_PLUS_MICRO;
683 default:
684 return -EINVAL;
685 }
686
687 ret = si1145_param_query(data, reg);
688 if (ret < 0)
689 return ret;
690
691 *val = si1145_scale_from_adcgain(ret & 0x07);
692
693 return IIO_VAL_INT;
694 case IIO_CHAN_INFO_OFFSET:
695 switch (chan->type) {
696 case IIO_TEMP:
697 /*
698 * -ADC offset - ADC counts @ 25°C -
699 * 35 * ADC counts / °C
700 */
701 *val = -256 - 11136 + 25 * 35;
702 return IIO_VAL_INT;
703 default:
704 /*
705 * All ADC measurements have are by default offset
706 * by -256
707 * See AN498 5.6.3
708 */
709 ret = si1145_param_query(data, SI1145_PARAM_ADC_OFFSET);
710 if (ret < 0)
711 return ret;
712 *val = -si1145_uncompress(ret);
713 return IIO_VAL_INT;
714 }
715 case IIO_CHAN_INFO_SAMP_FREQ:
716 return si1145_read_samp_freq(data, val, val2);
717 default:
718 return -EINVAL;
719 }
720 }
721
722 static int si1145_write_raw(struct iio_dev *indio_dev,
723 struct iio_chan_spec const *chan,
724 int val, int val2, long mask)
725 {
726 struct si1145_data *data = iio_priv(indio_dev);
727 u8 reg1, reg2, shift;
728 int ret;
729
730 switch (mask) {
731 case IIO_CHAN_INFO_SCALE:
732 switch (chan->type) {
733 case IIO_PROXIMITY:
734 val = si1145_proximity_adcgain_from_scale(val, val2);
735 if (val < 0)
736 return val;
737 reg1 = SI1145_PARAM_PS_ADC_GAIN;
738 reg2 = SI1145_PARAM_PS_ADC_COUNTER;
739 break;
740 case IIO_INTENSITY:
741 val = si1145_intensity_adcgain_from_scale(val, val2);
742 if (val < 0)
743 return val;
744 if (chan->channel2 == IIO_MOD_LIGHT_IR) {
745 reg1 = SI1145_PARAM_ALSIR_ADC_GAIN;
746 reg2 = SI1145_PARAM_ALSIR_ADC_COUNTER;
747 } else {
748 reg1 = SI1145_PARAM_ALSVIS_ADC_GAIN;
749 reg2 = SI1145_PARAM_ALSVIS_ADC_COUNTER;
750 }
751 break;
752 default:
753 return -EINVAL;
754 }
755
756 ret = iio_device_claim_direct_mode(indio_dev);
757 if (ret)
758 return ret;
759
760 ret = si1145_param_set(data, reg1, val);
761 if (ret < 0) {
762 iio_device_release_direct_mode(indio_dev);
763 return ret;
764 }
765 /* Set recovery period to one's complement of gain */
766 ret = si1145_param_set(data, reg2, (~val & 0x07) << 4);
767 iio_device_release_direct_mode(indio_dev);
768 return ret;
769 case IIO_CHAN_INFO_RAW:
770 if (chan->type != IIO_CURRENT)
771 return -EINVAL;
772
773 if (val < 0 || val > 15 || val2 != 0)
774 return -EINVAL;
775
776 reg1 = SI1145_PS_LED_REG(chan->channel);
777 shift = SI1145_PS_LED_SHIFT(chan->channel);
778
779 ret = iio_device_claim_direct_mode(indio_dev);
780 if (ret)
781 return ret;
782
783 ret = i2c_smbus_read_byte_data(data->client, reg1);
784 if (ret < 0) {
785 iio_device_release_direct_mode(indio_dev);
786 return ret;
787 }
788 ret = i2c_smbus_write_byte_data(data->client, reg1,
789 (ret & ~(0x0f << shift)) |
790 ((val & 0x0f) << shift));
791 iio_device_release_direct_mode(indio_dev);
792 return ret;
793 case IIO_CHAN_INFO_SAMP_FREQ:
794 return si1145_store_samp_freq(data, val);
795 default:
796 return -EINVAL;
797 }
798 }
799
800 #define SI1145_ST { \
801 .sign = 'u', \
802 .realbits = 16, \
803 .storagebits = 16, \
804 .endianness = IIO_LE, \
805 }
806
807 #define SI1145_INTENSITY_CHANNEL(_si) { \
808 .type = IIO_INTENSITY, \
809 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
810 BIT(IIO_CHAN_INFO_OFFSET) | \
811 BIT(IIO_CHAN_INFO_SCALE), \
812 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
813 .scan_type = SI1145_ST, \
814 .scan_index = _si, \
815 .address = SI1145_REG_ALSVIS_DATA, \
816 }
817
818 #define SI1145_INTENSITY_IR_CHANNEL(_si) { \
819 .type = IIO_INTENSITY, \
820 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
821 BIT(IIO_CHAN_INFO_OFFSET) | \
822 BIT(IIO_CHAN_INFO_SCALE), \
823 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
824 .modified = 1, \
825 .channel2 = IIO_MOD_LIGHT_IR, \
826 .scan_type = SI1145_ST, \
827 .scan_index = _si, \
828 .address = SI1145_REG_ALSIR_DATA, \
829 }
830
831 #define SI1145_TEMP_CHANNEL(_si) { \
832 .type = IIO_TEMP, \
833 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
834 BIT(IIO_CHAN_INFO_OFFSET) | \
835 BIT(IIO_CHAN_INFO_SCALE), \
836 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
837 .scan_type = SI1145_ST, \
838 .scan_index = _si, \
839 .address = SI1145_REG_AUX_DATA, \
840 }
841
842 #define SI1145_UV_CHANNEL(_si) { \
843 .type = IIO_UVINDEX, \
844 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
845 BIT(IIO_CHAN_INFO_SCALE), \
846 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
847 .scan_type = SI1145_ST, \
848 .scan_index = _si, \
849 .address = SI1145_REG_AUX_DATA, \
850 }
851
852 #define SI1145_PROXIMITY_CHANNEL(_si, _ch) { \
853 .type = IIO_PROXIMITY, \
854 .indexed = 1, \
855 .channel = _ch, \
856 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
857 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
858 BIT(IIO_CHAN_INFO_OFFSET), \
859 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
860 .scan_type = SI1145_ST, \
861 .scan_index = _si, \
862 .address = SI1145_REG_PS1_DATA + _ch * 2, \
863 }
864
865 #define SI1145_VOLTAGE_CHANNEL(_si) { \
866 .type = IIO_VOLTAGE, \
867 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
868 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
869 .scan_type = SI1145_ST, \
870 .scan_index = _si, \
871 .address = SI1145_REG_AUX_DATA, \
872 }
873
874 #define SI1145_CURRENT_CHANNEL(_ch) { \
875 .type = IIO_CURRENT, \
876 .indexed = 1, \
877 .channel = _ch, \
878 .output = 1, \
879 .scan_index = -1, \
880 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
881 }
882
883 static const struct iio_chan_spec si1132_channels[] = {
884 SI1145_INTENSITY_CHANNEL(0),
885 SI1145_INTENSITY_IR_CHANNEL(1),
886 SI1145_TEMP_CHANNEL(2),
887 SI1145_VOLTAGE_CHANNEL(3),
888 SI1145_UV_CHANNEL(4),
889 IIO_CHAN_SOFT_TIMESTAMP(6),
890 };
891
892 static const struct iio_chan_spec si1141_channels[] = {
893 SI1145_INTENSITY_CHANNEL(0),
894 SI1145_INTENSITY_IR_CHANNEL(1),
895 SI1145_PROXIMITY_CHANNEL(2, 0),
896 SI1145_TEMP_CHANNEL(3),
897 SI1145_VOLTAGE_CHANNEL(4),
898 IIO_CHAN_SOFT_TIMESTAMP(5),
899 SI1145_CURRENT_CHANNEL(0),
900 };
901
902 static const struct iio_chan_spec si1142_channels[] = {
903 SI1145_INTENSITY_CHANNEL(0),
904 SI1145_INTENSITY_IR_CHANNEL(1),
905 SI1145_PROXIMITY_CHANNEL(2, 0),
906 SI1145_PROXIMITY_CHANNEL(3, 1),
907 SI1145_TEMP_CHANNEL(4),
908 SI1145_VOLTAGE_CHANNEL(5),
909 IIO_CHAN_SOFT_TIMESTAMP(6),
910 SI1145_CURRENT_CHANNEL(0),
911 SI1145_CURRENT_CHANNEL(1),
912 };
913
914 static const struct iio_chan_spec si1143_channels[] = {
915 SI1145_INTENSITY_CHANNEL(0),
916 SI1145_INTENSITY_IR_CHANNEL(1),
917 SI1145_PROXIMITY_CHANNEL(2, 0),
918 SI1145_PROXIMITY_CHANNEL(3, 1),
919 SI1145_PROXIMITY_CHANNEL(4, 2),
920 SI1145_TEMP_CHANNEL(5),
921 SI1145_VOLTAGE_CHANNEL(6),
922 IIO_CHAN_SOFT_TIMESTAMP(7),
923 SI1145_CURRENT_CHANNEL(0),
924 SI1145_CURRENT_CHANNEL(1),
925 SI1145_CURRENT_CHANNEL(2),
926 };
927
928 static const struct iio_chan_spec si1145_channels[] = {
929 SI1145_INTENSITY_CHANNEL(0),
930 SI1145_INTENSITY_IR_CHANNEL(1),
931 SI1145_PROXIMITY_CHANNEL(2, 0),
932 SI1145_TEMP_CHANNEL(3),
933 SI1145_VOLTAGE_CHANNEL(4),
934 SI1145_UV_CHANNEL(5),
935 IIO_CHAN_SOFT_TIMESTAMP(6),
936 SI1145_CURRENT_CHANNEL(0),
937 };
938
939 static const struct iio_chan_spec si1146_channels[] = {
940 SI1145_INTENSITY_CHANNEL(0),
941 SI1145_INTENSITY_IR_CHANNEL(1),
942 SI1145_TEMP_CHANNEL(2),
943 SI1145_VOLTAGE_CHANNEL(3),
944 SI1145_UV_CHANNEL(4),
945 SI1145_PROXIMITY_CHANNEL(5, 0),
946 SI1145_PROXIMITY_CHANNEL(6, 1),
947 IIO_CHAN_SOFT_TIMESTAMP(7),
948 SI1145_CURRENT_CHANNEL(0),
949 SI1145_CURRENT_CHANNEL(1),
950 };
951
952 static const struct iio_chan_spec si1147_channels[] = {
953 SI1145_INTENSITY_CHANNEL(0),
954 SI1145_INTENSITY_IR_CHANNEL(1),
955 SI1145_PROXIMITY_CHANNEL(2, 0),
956 SI1145_PROXIMITY_CHANNEL(3, 1),
957 SI1145_PROXIMITY_CHANNEL(4, 2),
958 SI1145_TEMP_CHANNEL(5),
959 SI1145_VOLTAGE_CHANNEL(6),
960 SI1145_UV_CHANNEL(7),
961 IIO_CHAN_SOFT_TIMESTAMP(8),
962 SI1145_CURRENT_CHANNEL(0),
963 SI1145_CURRENT_CHANNEL(1),
964 SI1145_CURRENT_CHANNEL(2),
965 };
966
967 static struct attribute *si1132_attributes[] = {
968 &iio_const_attr_in_intensity_scale_available.dev_attr.attr,
969 &iio_const_attr_in_intensity_ir_scale_available.dev_attr.attr,
970 NULL,
971 };
972
973 static struct attribute *si114x_attributes[] = {
974 &iio_const_attr_in_intensity_scale_available.dev_attr.attr,
975 &iio_const_attr_in_intensity_ir_scale_available.dev_attr.attr,
976 &iio_const_attr_in_proximity_scale_available.dev_attr.attr,
977 NULL,
978 };
979
980 static const struct attribute_group si1132_attribute_group = {
981 .attrs = si1132_attributes,
982 };
983
984 static const struct attribute_group si114x_attribute_group = {
985 .attrs = si114x_attributes,
986 };
987
988
989 static const struct iio_info si1132_info = {
990 .read_raw = si1145_read_raw,
991 .write_raw = si1145_write_raw,
992 .driver_module = THIS_MODULE,
993 .attrs = &si1132_attribute_group,
994 };
995
996 static const struct iio_info si114x_info = {
997 .read_raw = si1145_read_raw,
998 .write_raw = si1145_write_raw,
999 .driver_module = THIS_MODULE,
1000 .attrs = &si114x_attribute_group,
1001 };
1002
1003 #define SI1145_PART(id, iio_info, chans, leds, uncompressed_meas_rate) \
1004 {id, iio_info, chans, ARRAY_SIZE(chans), leds, uncompressed_meas_rate}
1005
1006 static const struct si1145_part_info si1145_part_info[] = {
1007 [SI1132] = SI1145_PART(0x32, &si1132_info, si1132_channels, 0, true),
1008 [SI1141] = SI1145_PART(0x41, &si114x_info, si1141_channels, 1, false),
1009 [SI1142] = SI1145_PART(0x42, &si114x_info, si1142_channels, 2, false),
1010 [SI1143] = SI1145_PART(0x43, &si114x_info, si1143_channels, 3, false),
1011 [SI1145] = SI1145_PART(0x45, &si114x_info, si1145_channels, 1, true),
1012 [SI1146] = SI1145_PART(0x46, &si114x_info, si1146_channels, 2, true),
1013 [SI1147] = SI1145_PART(0x47, &si114x_info, si1147_channels, 3, true),
1014 };
1015
1016 static int si1145_initialize(struct si1145_data *data)
1017 {
1018 struct i2c_client *client = data->client;
1019 int ret;
1020
1021 ret = i2c_smbus_write_byte_data(client, SI1145_REG_COMMAND,
1022 SI1145_CMD_RESET);
1023 if (ret < 0)
1024 return ret;
1025 msleep(SI1145_COMMAND_TIMEOUT_MS);
1026
1027 /* Hardware key, magic value */
1028 ret = i2c_smbus_write_byte_data(client, SI1145_REG_HW_KEY, 0x17);
1029 if (ret < 0)
1030 return ret;
1031 msleep(SI1145_COMMAND_TIMEOUT_MS);
1032
1033 /* Turn off autonomous mode */
1034 ret = si1145_set_meas_rate(data, 0);
1035 if (ret < 0)
1036 return ret;
1037
1038 /* Initialize sampling freq to 10 Hz */
1039 ret = si1145_store_samp_freq(data, 10);
1040 if (ret < 0)
1041 return ret;
1042
1043 /* Set LED currents to 45 mA; have 4 bits, see Table 2 in datasheet */
1044 switch (data->part_info->num_leds) {
1045 case 3:
1046 ret = i2c_smbus_write_byte_data(client,
1047 SI1145_REG_PS_LED3,
1048 SI1145_LED_CURRENT_45mA);
1049 if (ret < 0)
1050 return ret;
1051 /* fallthrough */
1052 case 2:
1053 ret = i2c_smbus_write_byte_data(client,
1054 SI1145_REG_PS_LED21,
1055 (SI1145_LED_CURRENT_45mA << 4) |
1056 SI1145_LED_CURRENT_45mA);
1057 break;
1058 case 1:
1059 ret = i2c_smbus_write_byte_data(client,
1060 SI1145_REG_PS_LED21,
1061 SI1145_LED_CURRENT_45mA);
1062 break;
1063 default:
1064 ret = 0;
1065 break;
1066 }
1067 if (ret < 0)
1068 return ret;
1069
1070 /* Set normal proximity measurement mode */
1071 ret = si1145_param_set(data, SI1145_PARAM_PS_ADC_MISC,
1072 SI1145_PS_ADC_MODE_NORMAL);
1073 if (ret < 0)
1074 return ret;
1075
1076 ret = si1145_param_set(data, SI1145_PARAM_PS_ADC_GAIN, 0x01);
1077 if (ret < 0)
1078 return ret;
1079
1080 /* ADC_COUNTER should be one complement of ADC_GAIN */
1081 ret = si1145_param_set(data, SI1145_PARAM_PS_ADC_COUNTER, 0x06 << 4);
1082 if (ret < 0)
1083 return ret;
1084
1085 /* Set ALS visible measurement mode */
1086 ret = si1145_param_set(data, SI1145_PARAM_ALSVIS_ADC_MISC,
1087 SI1145_ADC_MISC_RANGE);
1088 if (ret < 0)
1089 return ret;
1090
1091 ret = si1145_param_set(data, SI1145_PARAM_ALSVIS_ADC_GAIN, 0x03);
1092 if (ret < 0)
1093 return ret;
1094
1095 ret = si1145_param_set(data, SI1145_PARAM_ALSVIS_ADC_COUNTER,
1096 0x04 << 4);
1097 if (ret < 0)
1098 return ret;
1099
1100 /* Set ALS IR measurement mode */
1101 ret = si1145_param_set(data, SI1145_PARAM_ALSIR_ADC_MISC,
1102 SI1145_ADC_MISC_RANGE);
1103 if (ret < 0)
1104 return ret;
1105
1106 ret = si1145_param_set(data, SI1145_PARAM_ALSIR_ADC_GAIN, 0x01);
1107 if (ret < 0)
1108 return ret;
1109
1110 ret = si1145_param_set(data, SI1145_PARAM_ALSIR_ADC_COUNTER,
1111 0x06 << 4);
1112 if (ret < 0)
1113 return ret;
1114
1115 /*
1116 * Initialize UCOEF to default values in datasheet
1117 * These registers are normally zero on reset
1118 */
1119 if (data->part_info == &si1145_part_info[SI1132] ||
1120 data->part_info == &si1145_part_info[SI1145] ||
1121 data->part_info == &si1145_part_info[SI1146] ||
1122 data->part_info == &si1145_part_info[SI1147]) {
1123 ret = i2c_smbus_write_byte_data(data->client,
1124 SI1145_REG_UCOEF1,
1125 SI1145_UCOEF1_DEFAULT);
1126 if (ret < 0)
1127 return ret;
1128 ret = i2c_smbus_write_byte_data(data->client,
1129 SI1145_REG_UCOEF2, SI1145_UCOEF2_DEFAULT);
1130 if (ret < 0)
1131 return ret;
1132 ret = i2c_smbus_write_byte_data(data->client,
1133 SI1145_REG_UCOEF3, SI1145_UCOEF3_DEFAULT);
1134 if (ret < 0)
1135 return ret;
1136 ret = i2c_smbus_write_byte_data(data->client,
1137 SI1145_REG_UCOEF4, SI1145_UCOEF4_DEFAULT);
1138 if (ret < 0)
1139 return ret;
1140 }
1141
1142 return 0;
1143 }
1144
1145 /*
1146 * Program the channels we want to measure with CMD_PSALS_AUTO. No need for
1147 * _postdisable as we stop with CMD_PSALS_PAUSE; single measurement (direct)
1148 * mode reprograms the channels list anyway...
1149 */
1150 static int si1145_buffer_preenable(struct iio_dev *indio_dev)
1151 {
1152 struct si1145_data *data = iio_priv(indio_dev);
1153 int ret;
1154
1155 mutex_lock(&data->lock);
1156 ret = si1145_set_chlist(indio_dev, *indio_dev->active_scan_mask);
1157 mutex_unlock(&data->lock);
1158
1159 return ret;
1160 }
1161
1162 static bool si1145_validate_scan_mask(struct iio_dev *indio_dev,
1163 const unsigned long *scan_mask)
1164 {
1165 struct si1145_data *data = iio_priv(indio_dev);
1166 unsigned int count = 0;
1167 int i;
1168
1169 /* Check that at most one AUX channel is enabled */
1170 for_each_set_bit(i, scan_mask, data->part_info->num_channels) {
1171 if (indio_dev->channels[i].address == SI1145_REG_AUX_DATA)
1172 count++;
1173 }
1174
1175 return count <= 1;
1176 }
1177
1178 static const struct iio_buffer_setup_ops si1145_buffer_setup_ops = {
1179 .preenable = si1145_buffer_preenable,
1180 .postenable = iio_triggered_buffer_postenable,
1181 .predisable = iio_triggered_buffer_predisable,
1182 .validate_scan_mask = si1145_validate_scan_mask,
1183 };
1184
1185 /**
1186 * si1145_trigger_set_state() - Set trigger state
1187 *
1188 * When not using triggers interrupts are disabled and measurement rate is
1189 * set to zero in order to minimize power consumption.
1190 */
1191 static int si1145_trigger_set_state(struct iio_trigger *trig, bool state)
1192 {
1193 struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
1194 struct si1145_data *data = iio_priv(indio_dev);
1195 int err = 0, ret;
1196
1197 mutex_lock(&data->lock);
1198
1199 if (state) {
1200 data->autonomous = true;
1201 err = i2c_smbus_write_byte_data(data->client,
1202 SI1145_REG_INT_CFG, SI1145_INT_CFG_OE);
1203 if (err < 0)
1204 goto disable;
1205 err = i2c_smbus_write_byte_data(data->client,
1206 SI1145_REG_IRQ_ENABLE, SI1145_MASK_ALL_IE);
1207 if (err < 0)
1208 goto disable;
1209 err = si1145_set_meas_rate(data, data->meas_rate);
1210 if (err < 0)
1211 goto disable;
1212 err = si1145_command(data, SI1145_CMD_PSALS_AUTO);
1213 if (err < 0)
1214 goto disable;
1215 } else {
1216 disable:
1217 /* Disable as much as possible skipping errors */
1218 ret = si1145_command(data, SI1145_CMD_PSALS_PAUSE);
1219 if (ret < 0 && !err)
1220 err = ret;
1221 ret = si1145_set_meas_rate(data, 0);
1222 if (ret < 0 && !err)
1223 err = ret;
1224 ret = i2c_smbus_write_byte_data(data->client,
1225 SI1145_REG_IRQ_ENABLE, 0);
1226 if (ret < 0 && !err)
1227 err = ret;
1228 ret = i2c_smbus_write_byte_data(data->client,
1229 SI1145_REG_INT_CFG, 0);
1230 if (ret < 0 && !err)
1231 err = ret;
1232 data->autonomous = false;
1233 }
1234
1235 mutex_unlock(&data->lock);
1236 return err;
1237 }
1238
1239 static const struct iio_trigger_ops si1145_trigger_ops = {
1240 .owner = THIS_MODULE,
1241 .set_trigger_state = si1145_trigger_set_state,
1242 };
1243
1244 static int si1145_probe_trigger(struct iio_dev *indio_dev)
1245 {
1246 struct si1145_data *data = iio_priv(indio_dev);
1247 struct i2c_client *client = data->client;
1248 struct iio_trigger *trig;
1249 int ret;
1250
1251 trig = devm_iio_trigger_alloc(&client->dev,
1252 "%s-dev%d", indio_dev->name, indio_dev->id);
1253 if (!trig)
1254 return -ENOMEM;
1255
1256 trig->dev.parent = &client->dev;
1257 trig->ops = &si1145_trigger_ops;
1258 iio_trigger_set_drvdata(trig, indio_dev);
1259
1260 ret = devm_request_irq(&client->dev, client->irq,
1261 iio_trigger_generic_data_rdy_poll,
1262 IRQF_TRIGGER_FALLING,
1263 "si1145_irq",
1264 trig);
1265 if (ret < 0) {
1266 dev_err(&client->dev, "irq request failed\n");
1267 return ret;
1268 }
1269
1270 ret = iio_trigger_register(trig);
1271 if (ret)
1272 return ret;
1273
1274 data->trig = trig;
1275 indio_dev->trig = iio_trigger_get(data->trig);
1276
1277 return 0;
1278 }
1279
1280 static void si1145_remove_trigger(struct iio_dev *indio_dev)
1281 {
1282 struct si1145_data *data = iio_priv(indio_dev);
1283
1284 if (data->trig) {
1285 iio_trigger_unregister(data->trig);
1286 data->trig = NULL;
1287 }
1288 }
1289
1290 static int si1145_probe(struct i2c_client *client,
1291 const struct i2c_device_id *id)
1292 {
1293 struct si1145_data *data;
1294 struct iio_dev *indio_dev;
1295 u8 part_id, rev_id, seq_id;
1296 int ret;
1297
1298 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
1299 if (!indio_dev)
1300 return -ENOMEM;
1301
1302 data = iio_priv(indio_dev);
1303 i2c_set_clientdata(client, indio_dev);
1304 data->client = client;
1305 data->part_info = &si1145_part_info[id->driver_data];
1306
1307 part_id = ret = i2c_smbus_read_byte_data(data->client,
1308 SI1145_REG_PART_ID);
1309 if (ret < 0)
1310 return ret;
1311 rev_id = ret = i2c_smbus_read_byte_data(data->client,
1312 SI1145_REG_REV_ID);
1313 if (ret < 0)
1314 return ret;
1315 seq_id = ret = i2c_smbus_read_byte_data(data->client,
1316 SI1145_REG_SEQ_ID);
1317 if (ret < 0)
1318 return ret;
1319 dev_info(&client->dev, "device ID part %#02hhx rev %#02hhx seq %#02hhx\n",
1320 part_id, rev_id, seq_id);
1321 if (part_id != data->part_info->part) {
1322 dev_err(&client->dev, "part ID mismatch got %#02hhx, expected %#02x\n",
1323 part_id, data->part_info->part);
1324 return -ENODEV;
1325 }
1326
1327 indio_dev->dev.parent = &client->dev;
1328 indio_dev->name = id->name;
1329 indio_dev->channels = data->part_info->channels;
1330 indio_dev->num_channels = data->part_info->num_channels;
1331 indio_dev->info = data->part_info->iio_info;
1332 indio_dev->modes = INDIO_DIRECT_MODE;
1333
1334 mutex_init(&data->lock);
1335 mutex_init(&data->cmdlock);
1336
1337 ret = si1145_initialize(data);
1338 if (ret < 0)
1339 return ret;
1340
1341 ret = iio_triggered_buffer_setup(indio_dev, NULL,
1342 si1145_trigger_handler, &si1145_buffer_setup_ops);
1343 if (ret < 0)
1344 return ret;
1345
1346 if (client->irq) {
1347 ret = si1145_probe_trigger(indio_dev);
1348 if (ret < 0)
1349 goto error_free_buffer;
1350 } else {
1351 dev_info(&client->dev, "no irq, using polling\n");
1352 }
1353
1354 ret = iio_device_register(indio_dev);
1355 if (ret < 0)
1356 goto error_free_trigger;
1357
1358 return 0;
1359
1360 error_free_trigger:
1361 si1145_remove_trigger(indio_dev);
1362 error_free_buffer:
1363 iio_triggered_buffer_cleanup(indio_dev);
1364
1365 return ret;
1366 }
1367
1368 static const struct i2c_device_id si1145_ids[] = {
1369 { "si1132", SI1132 },
1370 { "si1141", SI1141 },
1371 { "si1142", SI1142 },
1372 { "si1143", SI1143 },
1373 { "si1145", SI1145 },
1374 { "si1146", SI1146 },
1375 { "si1147", SI1147 },
1376 { }
1377 };
1378 MODULE_DEVICE_TABLE(i2c, si1145_ids);
1379
1380 static int si1145_remove(struct i2c_client *client)
1381 {
1382 struct iio_dev *indio_dev = i2c_get_clientdata(client);
1383
1384 iio_device_unregister(indio_dev);
1385 si1145_remove_trigger(indio_dev);
1386 iio_triggered_buffer_cleanup(indio_dev);
1387
1388 return 0;
1389 }
1390
1391 static struct i2c_driver si1145_driver = {
1392 .driver = {
1393 .name = "si1145",
1394 },
1395 .probe = si1145_probe,
1396 .remove = si1145_remove,
1397 .id_table = si1145_ids,
1398 };
1399
1400 module_i2c_driver(si1145_driver);
1401
1402 MODULE_AUTHOR("Peter Meerwald-Stadler <pmeerw@pmeerw.net>");
1403 MODULE_DESCRIPTION("Silabs SI1132 and SI1141/2/3/5/6/7 proximity, ambient light and UV index sensor driver");
1404 MODULE_LICENSE("GPL");
Linux with added FPC-III support