sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / iio / temperature / tmp006.c
blob18c9b43c02cb60583a15b29423ef09e449a0121e
1 /*
2 * tmp006.c - Support for TI TMP006 IR thermopile sensor
4 * Copyright (c) 2013 Peter Meerwald <pmeerw@pmeerw.net>
6 * This file is subject to the terms and conditions of version 2 of
7 * the GNU General Public License. See the file COPYING in the main
8 * directory of this archive for more details.
10 * Driver for the Texas Instruments I2C 16-bit IR thermopile sensor
12 * (7-bit I2C slave address 0x40, changeable via ADR pins)
14 * TODO: data ready irq
17 #include <linux/err.h>
18 #include <linux/i2c.h>
19 #include <linux/delay.h>
20 #include <linux/module.h>
21 #include <linux/pm.h>
22 #include <linux/bitops.h>
24 #include <linux/iio/iio.h>
25 #include <linux/iio/sysfs.h>
27 #define TMP006_VOBJECT 0x00
28 #define TMP006_TAMBIENT 0x01
29 #define TMP006_CONFIG 0x02
30 #define TMP006_MANUFACTURER_ID 0xfe
31 #define TMP006_DEVICE_ID 0xff
33 #define TMP006_TAMBIENT_SHIFT 2
35 #define TMP006_CONFIG_RESET BIT(15)
36 #define TMP006_CONFIG_DRDY_EN BIT(8)
37 #define TMP006_CONFIG_DRDY BIT(7)
39 #define TMP006_CONFIG_MOD_MASK GENMASK(14, 12)
41 #define TMP006_CONFIG_CR_MASK GENMASK(11, 9)
42 #define TMP006_CONFIG_CR_SHIFT 9
44 #define TMP006_MANUFACTURER_MAGIC 0x5449
45 #define TMP006_DEVICE_MAGIC 0x0067
47 struct tmp006_data {
48 struct i2c_client *client;
49 u16 config;
52 static int tmp006_read_measurement(struct tmp006_data *data, u8 reg)
54 s32 ret;
55 int tries = 50;
57 while (tries-- > 0) {
58 ret = i2c_smbus_read_word_swapped(data->client,
59 TMP006_CONFIG);
60 if (ret < 0)
61 return ret;
62 if (ret & TMP006_CONFIG_DRDY)
63 break;
64 msleep(100);
67 if (tries < 0)
68 return -EIO;
70 return i2c_smbus_read_word_swapped(data->client, reg);
73 static const int tmp006_freqs[5][2] = { {4, 0}, {2, 0}, {1, 0},
74 {0, 500000}, {0, 250000} };
76 static int tmp006_read_raw(struct iio_dev *indio_dev,
77 struct iio_chan_spec const *channel, int *val,
78 int *val2, long mask)
80 struct tmp006_data *data = iio_priv(indio_dev);
81 s32 ret;
82 int cr;
84 switch (mask) {
85 case IIO_CHAN_INFO_RAW:
86 if (channel->type == IIO_VOLTAGE) {
87 /* LSB is 156.25 nV */
88 ret = tmp006_read_measurement(data, TMP006_VOBJECT);
89 if (ret < 0)
90 return ret;
91 *val = sign_extend32(ret, 15);
92 } else if (channel->type == IIO_TEMP) {
93 /* LSB is 0.03125 degrees Celsius */
94 ret = tmp006_read_measurement(data, TMP006_TAMBIENT);
95 if (ret < 0)
96 return ret;
97 *val = sign_extend32(ret, 15) >> TMP006_TAMBIENT_SHIFT;
98 } else {
99 break;
101 return IIO_VAL_INT;
102 case IIO_CHAN_INFO_SCALE:
103 if (channel->type == IIO_VOLTAGE) {
104 *val = 0;
105 *val2 = 156250;
106 } else if (channel->type == IIO_TEMP) {
107 *val = 31;
108 *val2 = 250000;
109 } else {
110 break;
112 return IIO_VAL_INT_PLUS_MICRO;
113 case IIO_CHAN_INFO_SAMP_FREQ:
114 cr = (data->config & TMP006_CONFIG_CR_MASK)
115 >> TMP006_CONFIG_CR_SHIFT;
116 *val = tmp006_freqs[cr][0];
117 *val2 = tmp006_freqs[cr][1];
118 return IIO_VAL_INT_PLUS_MICRO;
119 default:
120 break;
123 return -EINVAL;
126 static int tmp006_write_raw(struct iio_dev *indio_dev,
127 struct iio_chan_spec const *chan,
128 int val,
129 int val2,
130 long mask)
132 struct tmp006_data *data = iio_priv(indio_dev);
133 int i;
135 if (mask != IIO_CHAN_INFO_SAMP_FREQ)
136 return -EINVAL;
138 for (i = 0; i < ARRAY_SIZE(tmp006_freqs); i++)
139 if ((val == tmp006_freqs[i][0]) &&
140 (val2 == tmp006_freqs[i][1])) {
141 data->config &= ~TMP006_CONFIG_CR_MASK;
142 data->config |= i << TMP006_CONFIG_CR_SHIFT;
144 return i2c_smbus_write_word_swapped(data->client,
145 TMP006_CONFIG,
146 data->config);
149 return -EINVAL;
152 static IIO_CONST_ATTR(sampling_frequency_available, "4 2 1 0.5 0.25");
154 static struct attribute *tmp006_attributes[] = {
155 &iio_const_attr_sampling_frequency_available.dev_attr.attr,
156 NULL
159 static const struct attribute_group tmp006_attribute_group = {
160 .attrs = tmp006_attributes,
163 static const struct iio_chan_spec tmp006_channels[] = {
165 .type = IIO_VOLTAGE,
166 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
167 BIT(IIO_CHAN_INFO_SCALE),
168 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
171 .type = IIO_TEMP,
172 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
173 BIT(IIO_CHAN_INFO_SCALE),
174 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
178 static const struct iio_info tmp006_info = {
179 .read_raw = tmp006_read_raw,
180 .write_raw = tmp006_write_raw,
181 .attrs = &tmp006_attribute_group,
182 .driver_module = THIS_MODULE,
185 static bool tmp006_check_identification(struct i2c_client *client)
187 int mid, did;
189 mid = i2c_smbus_read_word_swapped(client, TMP006_MANUFACTURER_ID);
190 if (mid < 0)
191 return false;
193 did = i2c_smbus_read_word_swapped(client, TMP006_DEVICE_ID);
194 if (did < 0)
195 return false;
197 return mid == TMP006_MANUFACTURER_MAGIC && did == TMP006_DEVICE_MAGIC;
200 static int tmp006_probe(struct i2c_client *client,
201 const struct i2c_device_id *id)
203 struct iio_dev *indio_dev;
204 struct tmp006_data *data;
205 int ret;
207 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
208 return -EOPNOTSUPP;
210 if (!tmp006_check_identification(client)) {
211 dev_err(&client->dev, "no TMP006 sensor\n");
212 return -ENODEV;
215 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
216 if (!indio_dev)
217 return -ENOMEM;
219 data = iio_priv(indio_dev);
220 i2c_set_clientdata(client, indio_dev);
221 data->client = client;
223 indio_dev->dev.parent = &client->dev;
224 indio_dev->name = dev_name(&client->dev);
225 indio_dev->modes = INDIO_DIRECT_MODE;
226 indio_dev->info = &tmp006_info;
228 indio_dev->channels = tmp006_channels;
229 indio_dev->num_channels = ARRAY_SIZE(tmp006_channels);
231 ret = i2c_smbus_read_word_swapped(data->client, TMP006_CONFIG);
232 if (ret < 0)
233 return ret;
234 data->config = ret;
236 return iio_device_register(indio_dev);
239 static int tmp006_powerdown(struct tmp006_data *data)
241 return i2c_smbus_write_word_swapped(data->client, TMP006_CONFIG,
242 data->config & ~TMP006_CONFIG_MOD_MASK);
245 static int tmp006_remove(struct i2c_client *client)
247 struct iio_dev *indio_dev = i2c_get_clientdata(client);
249 iio_device_unregister(indio_dev);
250 tmp006_powerdown(iio_priv(indio_dev));
252 return 0;
255 #ifdef CONFIG_PM_SLEEP
256 static int tmp006_suspend(struct device *dev)
258 struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
259 return tmp006_powerdown(iio_priv(indio_dev));
262 static int tmp006_resume(struct device *dev)
264 struct tmp006_data *data = iio_priv(i2c_get_clientdata(
265 to_i2c_client(dev)));
266 return i2c_smbus_write_word_swapped(data->client, TMP006_CONFIG,
267 data->config | TMP006_CONFIG_MOD_MASK);
269 #endif
271 static SIMPLE_DEV_PM_OPS(tmp006_pm_ops, tmp006_suspend, tmp006_resume);
273 static const struct i2c_device_id tmp006_id[] = {
274 { "tmp006", 0 },
277 MODULE_DEVICE_TABLE(i2c, tmp006_id);
279 static struct i2c_driver tmp006_driver = {
280 .driver = {
281 .name = "tmp006",
282 .pm = &tmp006_pm_ops,
284 .probe = tmp006_probe,
285 .remove = tmp006_remove,
286 .id_table = tmp006_id,
288 module_i2c_driver(tmp006_driver);
290 MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
291 MODULE_DESCRIPTION("TI TMP006 IR thermopile sensor driver");
292 MODULE_LICENSE("GPL");