drivers/media/dvb-frontends/dibx000_common.h

   1 #ifndef DIBX000_COMMON_H
   2 #define DIBX000_COMMON_H
   3
   4 enum dibx000_i2c_interface {
   5         DIBX000_I2C_INTERFACE_TUNER = 0,
   6         DIBX000_I2C_INTERFACE_GPIO_1_2 = 1,
   7         DIBX000_I2C_INTERFACE_GPIO_3_4 = 2,
   8         DIBX000_I2C_INTERFACE_GPIO_6_7 = 3
   9 };
  10
  11 struct dibx000_i2c_master {
  12 #define DIB3000MC 1
  13 #define DIB7000   2
  14 #define DIB7000P  11
  15 #define DIB7000MC 12
  16 #define DIB8000   13
  17         u16 device_rev;
  18
  19         enum dibx000_i2c_interface selected_interface;
  20
  21 /*      struct i2c_adapter  tuner_i2c_adap; */
  22         struct i2c_adapter gated_tuner_i2c_adap;
  23         struct i2c_adapter master_i2c_adap_gpio12;
  24         struct i2c_adapter master_i2c_adap_gpio34;
  25         struct i2c_adapter master_i2c_adap_gpio67;
  26
  27         struct i2c_adapter *i2c_adap;
  28         u8 i2c_addr;
  29
  30         u16 base_reg;
  31
  32         /* for the I2C transfer */
  33         struct i2c_msg msg[34];
  34         u8 i2c_write_buffer[8];
  35         u8 i2c_read_buffer[2];
  36         struct mutex i2c_buffer_lock;
  37 };
  38
  39 extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst,
  40                                         u16 device_rev, struct i2c_adapter *i2c_adap,
  41                                         u8 i2c_addr);
  42 extern struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master
  43                                                         *mst,
  44                                                         enum dibx000_i2c_interface
  45                                                         intf, int gating);
  46 extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst);
  47 extern void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst);
  48 extern int dibx000_i2c_set_speed(struct i2c_adapter *i2c_adap, u16 speed);
  49
  50 #define BAND_LBAND 0x01
  51 #define BAND_UHF   0x02
  52 #define BAND_VHF   0x04
  53 #define BAND_SBAND 0x08
  54 #define BAND_FM    0x10
  55 #define BAND_CBAND 0x20
  56
  57 #define BAND_OF_FREQUENCY(freq_kHz) ((freq_kHz) <= 170000 ? BAND_CBAND : \
  58                                                                         (freq_kHz) <= 115000 ? BAND_FM : \
  59                                                                         (freq_kHz) <= 250000 ? BAND_VHF : \
  60                                                                         (freq_kHz) <= 863000 ? BAND_UHF : \
  61                                                                         (freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND )
  62
  63 struct dibx000_agc_config {
  64         /* defines the capabilities of this AGC-setting - using the BAND_-defines */
  65         u8 band_caps;
  66
  67         u16 setup;
  68
  69         u16 inv_gain;
  70         u16 time_stabiliz;
  71
  72         u8 alpha_level;
  73         u16 thlock;
  74
  75         u8 wbd_inv;
  76         u16 wbd_ref;
  77         u8 wbd_sel;
  78         u8 wbd_alpha;
  79
  80         u16 agc1_max;
  81         u16 agc1_min;
  82         u16 agc2_max;
  83         u16 agc2_min;
  84
  85         u8 agc1_pt1;
  86         u8 agc1_pt2;
  87         u8 agc1_pt3;
  88
  89         u8 agc1_slope1;
  90         u8 agc1_slope2;
  91
  92         u8 agc2_pt1;
  93         u8 agc2_pt2;
  94
  95         u8 agc2_slope1;
  96         u8 agc2_slope2;
  97
  98         u8 alpha_mant;
  99         u8 alpha_exp;
 100
 101         u8 beta_mant;
 102         u8 beta_exp;
 103
 104         u8 perform_agc_softsplit;
 105
 106         struct {
 107                 u16 min;
 108                 u16 max;
 109                 u16 min_thres;
 110                 u16 max_thres;
 111         } split;
 112 };
 113
 114 struct dibx000_bandwidth_config {
 115         u32 internal;
 116         u32 sampling;
 117
 118         u8 pll_prediv;
 119         u8 pll_ratio;
 120         u8 pll_range;
 121         u8 pll_reset;
 122         u8 pll_bypass;
 123
 124         u8 enable_refdiv;
 125         u8 bypclk_div;
 126         u8 IO_CLK_en_core;
 127         u8 ADClkSrc;
 128         u8 modulo;
 129
 130         u16 sad_cfg;
 131
 132         u32 ifreq;
 133         u32 timf;
 134
 135         u32 xtal_hz;
 136 };
 137
 138 enum dibx000_adc_states {
 139         DIBX000_SLOW_ADC_ON = 0,
 140         DIBX000_SLOW_ADC_OFF,
 141         DIBX000_ADC_ON,
 142         DIBX000_ADC_OFF,
 143         DIBX000_VBG_ENABLE,
 144         DIBX000_VBG_DISABLE,
 145 };
 146
 147 #define BANDWIDTH_TO_KHZ(v)     ((v) / 1000)
 148 #define BANDWIDTH_TO_HZ(v)      ((v) * 1000)
 149
 150 /* Chip output mode. */
 151 #define OUTMODE_HIGH_Z              0
 152 #define OUTMODE_MPEG2_PAR_GATED_CLK 1
 153 #define OUTMODE_MPEG2_PAR_CONT_CLK  2
 154 #define OUTMODE_MPEG2_SERIAL        7
 155 #define OUTMODE_DIVERSITY           4
 156 #define OUTMODE_MPEG2_FIFO          5
 157 #define OUTMODE_ANALOG_ADC          6
 158
 159 #define INPUT_MODE_OFF                0x11
 160 #define INPUT_MODE_DIVERSITY          0x12
 161 #define INPUT_MODE_MPEG               0x13
 162
 163 enum frontend_tune_state {
 164         CT_TUNER_START = 10,
 165         CT_TUNER_STEP_0,
 166         CT_TUNER_STEP_1,
 167         CT_TUNER_STEP_2,
 168         CT_TUNER_STEP_3,
 169         CT_TUNER_STEP_4,
 170         CT_TUNER_STEP_5,
 171         CT_TUNER_STEP_6,
 172         CT_TUNER_STEP_7,
 173         CT_TUNER_STOP,
 174
 175         CT_AGC_START = 20,
 176         CT_AGC_STEP_0,
 177         CT_AGC_STEP_1,
 178         CT_AGC_STEP_2,
 179         CT_AGC_STEP_3,
 180         CT_AGC_STEP_4,
 181         CT_AGC_STOP,
 182
 183         CT_DEMOD_START = 30,
 184         CT_DEMOD_STEP_1,
 185         CT_DEMOD_STEP_2,
 186         CT_DEMOD_STEP_3,
 187         CT_DEMOD_STEP_4,
 188         CT_DEMOD_STEP_5,
 189         CT_DEMOD_STEP_6,
 190         CT_DEMOD_STEP_7,
 191         CT_DEMOD_STEP_8,
 192         CT_DEMOD_STEP_9,
 193         CT_DEMOD_STEP_10,
 194         CT_DEMOD_STEP_11,
 195         CT_DEMOD_SEARCH_NEXT = 51,
 196         CT_DEMOD_STEP_LOCKED,
 197         CT_DEMOD_STOP,
 198
 199         CT_DONE = 100,
 200         CT_SHUTDOWN,
 201
 202 };
 203
 204 struct dvb_frontend_parametersContext {
 205 #define CHANNEL_STATUS_PARAMETERS_UNKNOWN   0x01
 206 #define CHANNEL_STATUS_PARAMETERS_SET       0x02
 207         u8 status;
 208         u32 tune_time_estimation[2];
 209         s32 tps_available;
 210         u16 tps[9];
 211 };
 212
 213 #define FE_STATUS_TUNE_FAILED          0
 214 #define FE_STATUS_TUNE_TIMED_OUT      -1
 215 #define FE_STATUS_TUNE_TIME_TOO_SHORT -2
 216 #define FE_STATUS_TUNE_PENDING        -3
 217 #define FE_STATUS_STD_SUCCESS         -4
 218 #define FE_STATUS_FFT_SUCCESS         -5
 219 #define FE_STATUS_DEMOD_SUCCESS       -6
 220 #define FE_STATUS_LOCKED              -7
 221 #define FE_STATUS_DATA_LOCKED         -8
 222
 223 #define FE_CALLBACK_TIME_NEVER 0xffffffff
 224
 225 #define ABS(x) ((x < 0) ? (-x) : (x))
 226
 227 #define DATA_BUS_ACCESS_MODE_8BIT                 0x01
 228 #define DATA_BUS_ACCESS_MODE_16BIT                0x02
 229 #define DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT 0x10
 230
 231 struct dibGPIOFunction {
 232 #define BOARD_GPIO_COMPONENT_BUS_ADAPTER 1
 233 #define BOARD_GPIO_COMPONENT_DEMOD       2
 234         u8 component;
 235
 236 #define BOARD_GPIO_FUNCTION_BOARD_ON      1
 237 #define BOARD_GPIO_FUNCTION_BOARD_OFF     2
 238 #define BOARD_GPIO_FUNCTION_COMPONENT_ON  3
 239 #define BOARD_GPIO_FUNCTION_COMPONENT_OFF 4
 240 #define BOARD_GPIO_FUNCTION_SUBBAND_PWM   5
 241 #define BOARD_GPIO_FUNCTION_SUBBAND_GPIO   6
 242         u8 function;
 243
 244 /* mask, direction and value are used specify which GPIO to change GPIO0
 245  * is LSB and possible GPIO31 is MSB.  The same bit-position as in the
 246  * mask is used for the direction and the value. Direction == 1 is OUT,
 247  * 0 == IN. For direction "OUT" value is either 1 or 0, for direction IN
 248  * value has no meaning.
 249  *
 250  * In case of BOARD_GPIO_FUNCTION_PWM mask is giving the GPIO to be
 251  * used to do the PWM. Direction gives the PWModulator to be used.
 252  * Value gives the PWM value in device-dependent scale.
 253  */
 254         u32 mask;
 255         u32 direction;
 256         u32 value;
 257 };
 258
 259 #define MAX_NB_SUBBANDS   8
 260 struct dibSubbandSelection {
 261         u8  size; /* Actual number of subbands. */
 262         struct {
 263                 u16 f_mhz;
 264                 struct dibGPIOFunction gpio;
 265         } subband[MAX_NB_SUBBANDS];
 266 };
 267
 268 #define DEMOD_TIMF_SET    0x00
 269 #define DEMOD_TIMF_GET    0x01
 270 #define DEMOD_TIMF_UPDATE 0x02
 271
 272 #define MPEG_ON_DIBTX           1
 273 #define DIV_ON_DIBTX            2
 274 #define ADC_ON_DIBTX            3
 275 #define DEMOUT_ON_HOSTBUS       4
 276 #define DIBTX_ON_HOSTBUS        5
 277 #define MPEG_ON_HOSTBUS         6
 278
 279 #endif