2 * Driver for the Conexant CX23885 PCIe bridge
4 * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
20 #include <linux/init.h>
21 #include <linux/list.h>
22 #include <linux/module.h>
23 #include <linux/moduleparam.h>
24 #include <linux/kmod.h>
25 #include <linux/kernel.h>
26 #include <linux/slab.h>
27 #include <linux/interrupt.h>
28 #include <linux/delay.h>
29 #include <asm/div64.h>
30 #include <linux/firmware.h>
33 #include "altera-ci.h"
34 #include "cx23888-ir.h"
35 #include "cx23885-ir.h"
36 #include "cx23885-av.h"
37 #include "cx23885-input.h"
39 MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
40 MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
41 MODULE_LICENSE("GPL");
42 MODULE_VERSION(CX23885_VERSION
);
44 static unsigned int debug
;
45 module_param(debug
, int, 0644);
46 MODULE_PARM_DESC(debug
, "enable debug messages");
48 static unsigned int card
[] = {[0 ... (CX23885_MAXBOARDS
- 1)] = UNSET
};
49 module_param_array(card
, int, NULL
, 0444);
50 MODULE_PARM_DESC(card
, "card type");
52 #define dprintk(level, fmt, arg...)\
53 do { if (debug >= level)\
54 printk(KERN_DEBUG pr_fmt("%s: " fmt), \
58 static unsigned int cx23885_devcount
;
60 #define NO_SYNC_LINE (-1U)
62 /* FIXME, these allocations will change when
63 * analog arrives. The be reviewed.
65 * 1 line = 16 bytes of CDT
67 * cdt size = 16 * linesize
72 * 0x00000000 0x00008fff FIFO clusters
73 * 0x00010000 0x000104af Channel Management Data Structures
74 * 0x000104b0 0x000104ff Free
75 * 0x00010500 0x000108bf 15 channels * iqsize
76 * 0x000108c0 0x000108ff Free
77 * 0x00010900 0x00010e9f IQ's + Cluster Descriptor Tables
78 * 15 channels * (iqsize + (maxlines * linesize))
79 * 0x00010ea0 0x00010xxx Free
82 static struct sram_channel cx23885_sram_channels
[] = {
85 .cmds_start
= 0x10000,
86 .ctrl_start
= 0x10380,
90 .ptr1_reg
= DMA1_PTR1
,
91 .ptr2_reg
= DMA1_PTR2
,
92 .cnt1_reg
= DMA1_CNT1
,
93 .cnt2_reg
= DMA1_CNT2
,
102 .ptr1_reg
= DMA2_PTR1
,
103 .ptr2_reg
= DMA2_PTR2
,
104 .cnt1_reg
= DMA2_CNT1
,
105 .cnt2_reg
= DMA2_CNT2
,
109 .cmds_start
= 0x100A0,
110 .ctrl_start
= 0x10400,
112 .fifo_start
= 0x5000,
114 .ptr1_reg
= DMA3_PTR1
,
115 .ptr2_reg
= DMA3_PTR2
,
116 .cnt1_reg
= DMA3_CNT1
,
117 .cnt2_reg
= DMA3_CNT2
,
126 .ptr1_reg
= DMA4_PTR1
,
127 .ptr2_reg
= DMA4_PTR2
,
128 .cnt1_reg
= DMA4_CNT1
,
129 .cnt2_reg
= DMA4_CNT2
,
138 .ptr1_reg
= DMA5_PTR1
,
139 .ptr2_reg
= DMA5_PTR2
,
140 .cnt1_reg
= DMA5_CNT1
,
141 .cnt2_reg
= DMA5_CNT2
,
145 .cmds_start
= 0x10140,
146 .ctrl_start
= 0x10440,
148 .fifo_start
= 0x6000,
150 .ptr1_reg
= DMA5_PTR1
,
151 .ptr2_reg
= DMA5_PTR2
,
152 .cnt1_reg
= DMA5_CNT1
,
153 .cnt2_reg
= DMA5_CNT2
,
157 .cmds_start
= 0x10190,
158 .ctrl_start
= 0x10480,
160 .fifo_start
= 0x7000,
162 .ptr1_reg
= DMA6_PTR1
,
163 .ptr2_reg
= DMA6_PTR2
,
164 .cnt1_reg
= DMA6_CNT1
,
165 .cnt2_reg
= DMA6_CNT2
,
174 .ptr1_reg
= DMA7_PTR1
,
175 .ptr2_reg
= DMA7_PTR2
,
176 .cnt1_reg
= DMA7_CNT1
,
177 .cnt2_reg
= DMA7_CNT2
,
186 .ptr1_reg
= DMA8_PTR1
,
187 .ptr2_reg
= DMA8_PTR2
,
188 .cnt1_reg
= DMA8_CNT1
,
189 .cnt2_reg
= DMA8_CNT2
,
193 static struct sram_channel cx23887_sram_channels
[] = {
196 .cmds_start
= 0x10000,
197 .ctrl_start
= 0x105b0,
201 .ptr1_reg
= DMA1_PTR1
,
202 .ptr2_reg
= DMA1_PTR2
,
203 .cnt1_reg
= DMA1_CNT1
,
204 .cnt2_reg
= DMA1_CNT2
,
207 .name
= "VID A (VBI)",
208 .cmds_start
= 0x10050,
209 .ctrl_start
= 0x105F0,
211 .fifo_start
= 0x3000,
213 .ptr1_reg
= DMA2_PTR1
,
214 .ptr2_reg
= DMA2_PTR2
,
215 .cnt1_reg
= DMA2_CNT1
,
216 .cnt2_reg
= DMA2_CNT2
,
220 .cmds_start
= 0x100A0,
221 .ctrl_start
= 0x10630,
223 .fifo_start
= 0x5000,
225 .ptr1_reg
= DMA3_PTR1
,
226 .ptr2_reg
= DMA3_PTR2
,
227 .cnt1_reg
= DMA3_CNT1
,
228 .cnt2_reg
= DMA3_CNT2
,
237 .ptr1_reg
= DMA4_PTR1
,
238 .ptr2_reg
= DMA4_PTR2
,
239 .cnt1_reg
= DMA4_CNT1
,
240 .cnt2_reg
= DMA4_CNT2
,
249 .ptr1_reg
= DMA5_PTR1
,
250 .ptr2_reg
= DMA5_PTR2
,
251 .cnt1_reg
= DMA5_CNT1
,
252 .cnt2_reg
= DMA5_CNT2
,
256 .cmds_start
= 0x10140,
257 .ctrl_start
= 0x10670,
259 .fifo_start
= 0x6000,
261 .ptr1_reg
= DMA5_PTR1
,
262 .ptr2_reg
= DMA5_PTR2
,
263 .cnt1_reg
= DMA5_CNT1
,
264 .cnt2_reg
= DMA5_CNT2
,
268 .cmds_start
= 0x10190,
269 .ctrl_start
= 0x106B0,
271 .fifo_start
= 0x7000,
273 .ptr1_reg
= DMA6_PTR1
,
274 .ptr2_reg
= DMA6_PTR2
,
275 .cnt1_reg
= DMA6_CNT1
,
276 .cnt2_reg
= DMA6_CNT2
,
285 .ptr1_reg
= DMA7_PTR1
,
286 .ptr2_reg
= DMA7_PTR2
,
287 .cnt1_reg
= DMA7_CNT1
,
288 .cnt2_reg
= DMA7_CNT2
,
297 .ptr1_reg
= DMA8_PTR1
,
298 .ptr2_reg
= DMA8_PTR2
,
299 .cnt1_reg
= DMA8_CNT1
,
300 .cnt2_reg
= DMA8_CNT2
,
304 static void cx23885_irq_add(struct cx23885_dev
*dev
, u32 mask
)
307 spin_lock_irqsave(&dev
->pci_irqmask_lock
, flags
);
309 dev
->pci_irqmask
|= mask
;
311 spin_unlock_irqrestore(&dev
->pci_irqmask_lock
, flags
);
314 void cx23885_irq_add_enable(struct cx23885_dev
*dev
, u32 mask
)
317 spin_lock_irqsave(&dev
->pci_irqmask_lock
, flags
);
319 dev
->pci_irqmask
|= mask
;
320 cx_set(PCI_INT_MSK
, mask
);
322 spin_unlock_irqrestore(&dev
->pci_irqmask_lock
, flags
);
325 void cx23885_irq_enable(struct cx23885_dev
*dev
, u32 mask
)
329 spin_lock_irqsave(&dev
->pci_irqmask_lock
, flags
);
331 v
= mask
& dev
->pci_irqmask
;
333 cx_set(PCI_INT_MSK
, v
);
335 spin_unlock_irqrestore(&dev
->pci_irqmask_lock
, flags
);
338 static inline void cx23885_irq_enable_all(struct cx23885_dev
*dev
)
340 cx23885_irq_enable(dev
, 0xffffffff);
343 void cx23885_irq_disable(struct cx23885_dev
*dev
, u32 mask
)
346 spin_lock_irqsave(&dev
->pci_irqmask_lock
, flags
);
348 cx_clear(PCI_INT_MSK
, mask
);
350 spin_unlock_irqrestore(&dev
->pci_irqmask_lock
, flags
);
353 static inline void cx23885_irq_disable_all(struct cx23885_dev
*dev
)
355 cx23885_irq_disable(dev
, 0xffffffff);
358 void cx23885_irq_remove(struct cx23885_dev
*dev
, u32 mask
)
361 spin_lock_irqsave(&dev
->pci_irqmask_lock
, flags
);
363 dev
->pci_irqmask
&= ~mask
;
364 cx_clear(PCI_INT_MSK
, mask
);
366 spin_unlock_irqrestore(&dev
->pci_irqmask_lock
, flags
);
369 static u32
cx23885_irq_get_mask(struct cx23885_dev
*dev
)
373 spin_lock_irqsave(&dev
->pci_irqmask_lock
, flags
);
375 v
= cx_read(PCI_INT_MSK
);
377 spin_unlock_irqrestore(&dev
->pci_irqmask_lock
, flags
);
381 static int cx23885_risc_decode(u32 risc
)
383 static char *instr
[16] = {
384 [RISC_SYNC
>> 28] = "sync",
385 [RISC_WRITE
>> 28] = "write",
386 [RISC_WRITEC
>> 28] = "writec",
387 [RISC_READ
>> 28] = "read",
388 [RISC_READC
>> 28] = "readc",
389 [RISC_JUMP
>> 28] = "jump",
390 [RISC_SKIP
>> 28] = "skip",
391 [RISC_WRITERM
>> 28] = "writerm",
392 [RISC_WRITECM
>> 28] = "writecm",
393 [RISC_WRITECR
>> 28] = "writecr",
395 static int incr
[16] = {
396 [RISC_WRITE
>> 28] = 3,
397 [RISC_JUMP
>> 28] = 3,
398 [RISC_SKIP
>> 28] = 1,
399 [RISC_SYNC
>> 28] = 1,
400 [RISC_WRITERM
>> 28] = 3,
401 [RISC_WRITECM
>> 28] = 3,
402 [RISC_WRITECR
>> 28] = 4,
404 static char *bits
[] = {
405 "12", "13", "14", "resync",
406 "cnt0", "cnt1", "18", "19",
407 "20", "21", "22", "23",
408 "irq1", "irq2", "eol", "sol",
412 printk(KERN_DEBUG
"0x%08x [ %s", risc
,
413 instr
[risc
>> 28] ? instr
[risc
>> 28] : "INVALID");
414 for (i
= ARRAY_SIZE(bits
) - 1; i
>= 0; i
--)
415 if (risc
& (1 << (i
+ 12)))
416 pr_cont(" %s", bits
[i
]);
417 pr_cont(" count=%d ]\n", risc
& 0xfff);
418 return incr
[risc
>> 28] ? incr
[risc
>> 28] : 1;
421 static void cx23885_wakeup(struct cx23885_tsport
*port
,
422 struct cx23885_dmaqueue
*q
, u32 count
)
424 struct cx23885_buffer
*buf
;
426 if (list_empty(&q
->active
))
428 buf
= list_entry(q
->active
.next
,
429 struct cx23885_buffer
, queue
);
431 buf
->vb
.vb2_buf
.timestamp
= ktime_get_ns();
432 buf
->vb
.sequence
= q
->count
++;
433 dprintk(1, "[%p/%d] wakeup reg=%d buf=%d\n", buf
,
434 buf
->vb
.vb2_buf
.index
,
436 list_del(&buf
->queue
);
437 vb2_buffer_done(&buf
->vb
.vb2_buf
, VB2_BUF_STATE_DONE
);
440 int cx23885_sram_channel_setup(struct cx23885_dev
*dev
,
441 struct sram_channel
*ch
,
442 unsigned int bpl
, u32 risc
)
444 unsigned int i
, lines
;
447 if (ch
->cmds_start
== 0) {
448 dprintk(1, "%s() Erasing channel [%s]\n", __func__
,
450 cx_write(ch
->ptr1_reg
, 0);
451 cx_write(ch
->ptr2_reg
, 0);
452 cx_write(ch
->cnt2_reg
, 0);
453 cx_write(ch
->cnt1_reg
, 0);
456 dprintk(1, "%s() Configuring channel [%s]\n", __func__
,
460 bpl
= (bpl
+ 7) & ~7; /* alignment */
462 lines
= ch
->fifo_size
/ bpl
;
467 cx_write(8 + 0, RISC_JUMP
| RISC_CNT_RESET
);
472 for (i
= 0; i
< lines
; i
++) {
473 dprintk(2, "%s() 0x%08x <- 0x%08x\n", __func__
, cdt
+ 16*i
,
474 ch
->fifo_start
+ bpl
*i
);
475 cx_write(cdt
+ 16*i
, ch
->fifo_start
+ bpl
*i
);
476 cx_write(cdt
+ 16*i
+ 4, 0);
477 cx_write(cdt
+ 16*i
+ 8, 0);
478 cx_write(cdt
+ 16*i
+ 12, 0);
483 cx_write(ch
->cmds_start
+ 0, 8);
485 cx_write(ch
->cmds_start
+ 0, risc
);
486 cx_write(ch
->cmds_start
+ 4, 0); /* 64 bits 63-32 */
487 cx_write(ch
->cmds_start
+ 8, cdt
);
488 cx_write(ch
->cmds_start
+ 12, (lines
*16) >> 3);
489 cx_write(ch
->cmds_start
+ 16, ch
->ctrl_start
);
491 cx_write(ch
->cmds_start
+ 20, 0x80000000 | (64 >> 2));
493 cx_write(ch
->cmds_start
+ 20, 64 >> 2);
494 for (i
= 24; i
< 80; i
+= 4)
495 cx_write(ch
->cmds_start
+ i
, 0);
498 cx_write(ch
->ptr1_reg
, ch
->fifo_start
);
499 cx_write(ch
->ptr2_reg
, cdt
);
500 cx_write(ch
->cnt2_reg
, (lines
*16) >> 3);
501 cx_write(ch
->cnt1_reg
, (bpl
>> 3) - 1);
503 dprintk(2, "[bridge %d] sram setup %s: bpl=%d lines=%d\n",
512 void cx23885_sram_channel_dump(struct cx23885_dev
*dev
,
513 struct sram_channel
*ch
)
515 static char *name
[] = {
532 unsigned int i
, j
, n
;
534 pr_warn("%s: %s - dma channel status dump\n",
535 dev
->name
, ch
->name
);
536 for (i
= 0; i
< ARRAY_SIZE(name
); i
++)
537 pr_warn("%s: cmds: %-15s: 0x%08x\n",
539 cx_read(ch
->cmds_start
+ 4*i
));
541 for (i
= 0; i
< 4; i
++) {
542 risc
= cx_read(ch
->cmds_start
+ 4 * (i
+ 14));
543 pr_warn("%s: risc%d: ", dev
->name
, i
);
544 cx23885_risc_decode(risc
);
546 for (i
= 0; i
< (64 >> 2); i
+= n
) {
547 risc
= cx_read(ch
->ctrl_start
+ 4 * i
);
548 /* No consideration for bits 63-32 */
550 pr_warn("%s: (0x%08x) iq %x: ", dev
->name
,
551 ch
->ctrl_start
+ 4 * i
, i
);
552 n
= cx23885_risc_decode(risc
);
553 for (j
= 1; j
< n
; j
++) {
554 risc
= cx_read(ch
->ctrl_start
+ 4 * (i
+ j
));
555 pr_warn("%s: iq %x: 0x%08x [ arg #%d ]\n",
556 dev
->name
, i
+j
, risc
, j
);
560 pr_warn("%s: fifo: 0x%08x -> 0x%x\n",
561 dev
->name
, ch
->fifo_start
, ch
->fifo_start
+ch
->fifo_size
);
562 pr_warn("%s: ctrl: 0x%08x -> 0x%x\n",
563 dev
->name
, ch
->ctrl_start
, ch
->ctrl_start
+ 6*16);
564 pr_warn("%s: ptr1_reg: 0x%08x\n",
565 dev
->name
, cx_read(ch
->ptr1_reg
));
566 pr_warn("%s: ptr2_reg: 0x%08x\n",
567 dev
->name
, cx_read(ch
->ptr2_reg
));
568 pr_warn("%s: cnt1_reg: 0x%08x\n",
569 dev
->name
, cx_read(ch
->cnt1_reg
));
570 pr_warn("%s: cnt2_reg: 0x%08x\n",
571 dev
->name
, cx_read(ch
->cnt2_reg
));
574 static void cx23885_risc_disasm(struct cx23885_tsport
*port
,
575 struct cx23885_riscmem
*risc
)
577 struct cx23885_dev
*dev
= port
->dev
;
578 unsigned int i
, j
, n
;
580 pr_info("%s: risc disasm: %p [dma=0x%08lx]\n",
581 dev
->name
, risc
->cpu
, (unsigned long)risc
->dma
);
582 for (i
= 0; i
< (risc
->size
>> 2); i
+= n
) {
583 pr_info("%s: %04d: ", dev
->name
, i
);
584 n
= cx23885_risc_decode(le32_to_cpu(risc
->cpu
[i
]));
585 for (j
= 1; j
< n
; j
++)
586 pr_info("%s: %04d: 0x%08x [ arg #%d ]\n",
587 dev
->name
, i
+ j
, risc
->cpu
[i
+ j
], j
);
588 if (risc
->cpu
[i
] == cpu_to_le32(RISC_JUMP
))
593 static void cx23885_shutdown(struct cx23885_dev
*dev
)
595 /* disable RISC controller */
596 cx_write(DEV_CNTRL2
, 0);
598 /* Disable all IR activity */
599 cx_write(IR_CNTRL_REG
, 0);
601 /* Disable Video A/B activity */
602 cx_write(VID_A_DMA_CTL
, 0);
603 cx_write(VID_B_DMA_CTL
, 0);
604 cx_write(VID_C_DMA_CTL
, 0);
606 /* Disable Audio activity */
607 cx_write(AUD_INT_DMA_CTL
, 0);
608 cx_write(AUD_EXT_DMA_CTL
, 0);
610 /* Disable Serial port */
611 cx_write(UART_CTL
, 0);
613 /* Disable Interrupts */
614 cx23885_irq_disable_all(dev
);
615 cx_write(VID_A_INT_MSK
, 0);
616 cx_write(VID_B_INT_MSK
, 0);
617 cx_write(VID_C_INT_MSK
, 0);
618 cx_write(AUDIO_INT_INT_MSK
, 0);
619 cx_write(AUDIO_EXT_INT_MSK
, 0);
623 static void cx23885_reset(struct cx23885_dev
*dev
)
625 dprintk(1, "%s()\n", __func__
);
627 cx23885_shutdown(dev
);
629 cx_write(PCI_INT_STAT
, 0xffffffff);
630 cx_write(VID_A_INT_STAT
, 0xffffffff);
631 cx_write(VID_B_INT_STAT
, 0xffffffff);
632 cx_write(VID_C_INT_STAT
, 0xffffffff);
633 cx_write(AUDIO_INT_INT_STAT
, 0xffffffff);
634 cx_write(AUDIO_EXT_INT_STAT
, 0xffffffff);
635 cx_write(CLK_DELAY
, cx_read(CLK_DELAY
) & 0x80000000);
636 cx_write(PAD_CTRL
, 0x00500300);
640 cx23885_sram_channel_setup(dev
, &dev
->sram_channels
[SRAM_CH01
],
642 cx23885_sram_channel_setup(dev
, &dev
->sram_channels
[SRAM_CH02
], 128, 0);
643 cx23885_sram_channel_setup(dev
, &dev
->sram_channels
[SRAM_CH03
],
645 cx23885_sram_channel_setup(dev
, &dev
->sram_channels
[SRAM_CH04
], 128, 0);
646 cx23885_sram_channel_setup(dev
, &dev
->sram_channels
[SRAM_CH05
], 128, 0);
647 cx23885_sram_channel_setup(dev
, &dev
->sram_channels
[SRAM_CH06
],
649 cx23885_sram_channel_setup(dev
, &dev
->sram_channels
[SRAM_CH07
], 128, 0);
650 cx23885_sram_channel_setup(dev
, &dev
->sram_channels
[SRAM_CH08
], 128, 0);
651 cx23885_sram_channel_setup(dev
, &dev
->sram_channels
[SRAM_CH09
], 128, 0);
653 cx23885_gpio_setup(dev
);
657 static int cx23885_pci_quirks(struct cx23885_dev
*dev
)
659 dprintk(1, "%s()\n", __func__
);
661 /* The cx23885 bridge has a weird bug which causes NMI to be asserted
662 * when DMA begins if RDR_TLCTL0 bit4 is not cleared. It does not
663 * occur on the cx23887 bridge.
665 if (dev
->bridge
== CX23885_BRIDGE_885
)
666 cx_clear(RDR_TLCTL0
, 1 << 4);
671 static int get_resources(struct cx23885_dev
*dev
)
673 if (request_mem_region(pci_resource_start(dev
->pci
, 0),
674 pci_resource_len(dev
->pci
, 0),
678 pr_err("%s: can't get MMIO memory @ 0x%llx\n",
679 dev
->name
, (unsigned long long)pci_resource_start(dev
->pci
, 0));
684 static int cx23885_init_tsport(struct cx23885_dev
*dev
,
685 struct cx23885_tsport
*port
, int portno
)
687 dprintk(1, "%s(portno=%d)\n", __func__
, portno
);
689 /* Transport bus init dma queue - Common settings */
690 port
->dma_ctl_val
= 0x11; /* Enable RISC controller and Fifo */
691 port
->ts_int_msk_val
= 0x1111; /* TS port bits for RISC */
692 port
->vld_misc_val
= 0x0;
693 port
->hw_sop_ctrl_val
= (0x47 << 16 | 188 << 4);
695 spin_lock_init(&port
->slock
);
699 INIT_LIST_HEAD(&port
->mpegq
.active
);
700 mutex_init(&port
->frontends
.lock
);
701 INIT_LIST_HEAD(&port
->frontends
.felist
);
702 port
->frontends
.active_fe_id
= 0;
704 /* This should be hardcoded allow a single frontend
705 * attachment to this tsport, keeping the -dvb.c
706 * code clean and safe.
708 if (!port
->num_frontends
)
709 port
->num_frontends
= 1;
713 port
->reg_gpcnt
= VID_B_GPCNT
;
714 port
->reg_gpcnt_ctl
= VID_B_GPCNT_CTL
;
715 port
->reg_dma_ctl
= VID_B_DMA_CTL
;
716 port
->reg_lngth
= VID_B_LNGTH
;
717 port
->reg_hw_sop_ctrl
= VID_B_HW_SOP_CTL
;
718 port
->reg_gen_ctrl
= VID_B_GEN_CTL
;
719 port
->reg_bd_pkt_status
= VID_B_BD_PKT_STATUS
;
720 port
->reg_sop_status
= VID_B_SOP_STATUS
;
721 port
->reg_fifo_ovfl_stat
= VID_B_FIFO_OVFL_STAT
;
722 port
->reg_vld_misc
= VID_B_VLD_MISC
;
723 port
->reg_ts_clk_en
= VID_B_TS_CLK_EN
;
724 port
->reg_src_sel
= VID_B_SRC_SEL
;
725 port
->reg_ts_int_msk
= VID_B_INT_MSK
;
726 port
->reg_ts_int_stat
= VID_B_INT_STAT
;
727 port
->sram_chno
= SRAM_CH03
; /* VID_B */
728 port
->pci_irqmask
= 0x02; /* VID_B bit1 */
731 port
->reg_gpcnt
= VID_C_GPCNT
;
732 port
->reg_gpcnt_ctl
= VID_C_GPCNT_CTL
;
733 port
->reg_dma_ctl
= VID_C_DMA_CTL
;
734 port
->reg_lngth
= VID_C_LNGTH
;
735 port
->reg_hw_sop_ctrl
= VID_C_HW_SOP_CTL
;
736 port
->reg_gen_ctrl
= VID_C_GEN_CTL
;
737 port
->reg_bd_pkt_status
= VID_C_BD_PKT_STATUS
;
738 port
->reg_sop_status
= VID_C_SOP_STATUS
;
739 port
->reg_fifo_ovfl_stat
= VID_C_FIFO_OVFL_STAT
;
740 port
->reg_vld_misc
= VID_C_VLD_MISC
;
741 port
->reg_ts_clk_en
= VID_C_TS_CLK_EN
;
742 port
->reg_src_sel
= 0;
743 port
->reg_ts_int_msk
= VID_C_INT_MSK
;
744 port
->reg_ts_int_stat
= VID_C_INT_STAT
;
745 port
->sram_chno
= SRAM_CH06
; /* VID_C */
746 port
->pci_irqmask
= 0x04; /* VID_C bit2 */
755 static void cx23885_dev_checkrevision(struct cx23885_dev
*dev
)
757 switch (cx_read(RDR_CFG2
) & 0xff) {
760 dev
->hwrevision
= 0xa0;
764 dev
->hwrevision
= 0xa1;
767 /* CX23885-13Z/14Z */
768 dev
->hwrevision
= 0xb0;
771 if (dev
->pci
->device
== 0x8880) {
772 /* CX23888-21Z/22Z */
773 dev
->hwrevision
= 0xc0;
776 dev
->hwrevision
= 0xa4;
780 if (dev
->pci
->device
== 0x8880) {
782 dev
->hwrevision
= 0xd0;
784 /* CX23885-15Z, CX23888-31Z */
785 dev
->hwrevision
= 0xa5;
790 dev
->hwrevision
= 0xc0;
794 dev
->hwrevision
= 0xb1;
797 pr_err("%s() New hardware revision found 0x%x\n",
798 __func__
, dev
->hwrevision
);
801 pr_info("%s() Hardware revision = 0x%02x\n",
802 __func__
, dev
->hwrevision
);
804 pr_err("%s() Hardware revision unknown 0x%x\n",
805 __func__
, dev
->hwrevision
);
808 /* Find the first v4l2_subdev member of the group id in hw */
809 struct v4l2_subdev
*cx23885_find_hw(struct cx23885_dev
*dev
, u32 hw
)
811 struct v4l2_subdev
*result
= NULL
;
812 struct v4l2_subdev
*sd
;
814 spin_lock(&dev
->v4l2_dev
.lock
);
815 v4l2_device_for_each_subdev(sd
, &dev
->v4l2_dev
) {
816 if (sd
->grp_id
== hw
) {
821 spin_unlock(&dev
->v4l2_dev
.lock
);
825 static int cx23885_dev_setup(struct cx23885_dev
*dev
)
829 spin_lock_init(&dev
->pci_irqmask_lock
);
830 spin_lock_init(&dev
->slock
);
832 mutex_init(&dev
->lock
);
833 mutex_init(&dev
->gpio_lock
);
835 atomic_inc(&dev
->refcount
);
837 dev
->nr
= cx23885_devcount
++;
838 sprintf(dev
->name
, "cx23885[%d]", dev
->nr
);
840 /* Configure the internal memory */
841 if (dev
->pci
->device
== 0x8880) {
842 /* Could be 887 or 888, assume a default */
843 dev
->bridge
= CX23885_BRIDGE_887
;
844 /* Apply a sensible clock frequency for the PCIe bridge */
845 dev
->clk_freq
= 25000000;
846 dev
->sram_channels
= cx23887_sram_channels
;
848 if (dev
->pci
->device
== 0x8852) {
849 dev
->bridge
= CX23885_BRIDGE_885
;
850 /* Apply a sensible clock frequency for the PCIe bridge */
851 dev
->clk_freq
= 28000000;
852 dev
->sram_channels
= cx23885_sram_channels
;
856 dprintk(1, "%s() Memory configured for PCIe bridge type %d\n",
857 __func__
, dev
->bridge
);
861 if (card
[dev
->nr
] < cx23885_bcount
)
862 dev
->board
= card
[dev
->nr
];
863 for (i
= 0; UNSET
== dev
->board
&& i
< cx23885_idcount
; i
++)
864 if (dev
->pci
->subsystem_vendor
== cx23885_subids
[i
].subvendor
&&
865 dev
->pci
->subsystem_device
== cx23885_subids
[i
].subdevice
)
866 dev
->board
= cx23885_subids
[i
].card
;
867 if (UNSET
== dev
->board
) {
868 dev
->board
= CX23885_BOARD_UNKNOWN
;
869 cx23885_card_list(dev
);
872 /* If the user specific a clk freq override, apply it */
873 if (cx23885_boards
[dev
->board
].clk_freq
> 0)
874 dev
->clk_freq
= cx23885_boards
[dev
->board
].clk_freq
;
876 dev
->pci_bus
= dev
->pci
->bus
->number
;
877 dev
->pci_slot
= PCI_SLOT(dev
->pci
->devfn
);
878 cx23885_irq_add(dev
, 0x001f00);
880 /* External Master 1 Bus */
881 dev
->i2c_bus
[0].nr
= 0;
882 dev
->i2c_bus
[0].dev
= dev
;
883 dev
->i2c_bus
[0].reg_stat
= I2C1_STAT
;
884 dev
->i2c_bus
[0].reg_ctrl
= I2C1_CTRL
;
885 dev
->i2c_bus
[0].reg_addr
= I2C1_ADDR
;
886 dev
->i2c_bus
[0].reg_rdata
= I2C1_RDATA
;
887 dev
->i2c_bus
[0].reg_wdata
= I2C1_WDATA
;
888 dev
->i2c_bus
[0].i2c_period
= (0x9d << 24); /* 100kHz */
890 /* External Master 2 Bus */
891 dev
->i2c_bus
[1].nr
= 1;
892 dev
->i2c_bus
[1].dev
= dev
;
893 dev
->i2c_bus
[1].reg_stat
= I2C2_STAT
;
894 dev
->i2c_bus
[1].reg_ctrl
= I2C2_CTRL
;
895 dev
->i2c_bus
[1].reg_addr
= I2C2_ADDR
;
896 dev
->i2c_bus
[1].reg_rdata
= I2C2_RDATA
;
897 dev
->i2c_bus
[1].reg_wdata
= I2C2_WDATA
;
898 dev
->i2c_bus
[1].i2c_period
= (0x9d << 24); /* 100kHz */
900 /* Internal Master 3 Bus */
901 dev
->i2c_bus
[2].nr
= 2;
902 dev
->i2c_bus
[2].dev
= dev
;
903 dev
->i2c_bus
[2].reg_stat
= I2C3_STAT
;
904 dev
->i2c_bus
[2].reg_ctrl
= I2C3_CTRL
;
905 dev
->i2c_bus
[2].reg_addr
= I2C3_ADDR
;
906 dev
->i2c_bus
[2].reg_rdata
= I2C3_RDATA
;
907 dev
->i2c_bus
[2].reg_wdata
= I2C3_WDATA
;
908 dev
->i2c_bus
[2].i2c_period
= (0x07 << 24); /* 1.95MHz */
910 if ((cx23885_boards
[dev
->board
].portb
== CX23885_MPEG_DVB
) ||
911 (cx23885_boards
[dev
->board
].portb
== CX23885_MPEG_ENCODER
))
912 cx23885_init_tsport(dev
, &dev
->ts1
, 1);
914 if ((cx23885_boards
[dev
->board
].portc
== CX23885_MPEG_DVB
) ||
915 (cx23885_boards
[dev
->board
].portc
== CX23885_MPEG_ENCODER
))
916 cx23885_init_tsport(dev
, &dev
->ts2
, 2);
918 if (get_resources(dev
) < 0) {
919 pr_err("CORE %s No more PCIe resources for subsystem: %04x:%04x\n",
920 dev
->name
, dev
->pci
->subsystem_vendor
,
921 dev
->pci
->subsystem_device
);
928 dev
->lmmio
= ioremap(pci_resource_start(dev
->pci
, 0),
929 pci_resource_len(dev
->pci
, 0));
931 dev
->bmmio
= (u8 __iomem
*)dev
->lmmio
;
933 pr_info("CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
934 dev
->name
, dev
->pci
->subsystem_vendor
,
935 dev
->pci
->subsystem_device
, cx23885_boards
[dev
->board
].name
,
936 dev
->board
, card
[dev
->nr
] == dev
->board
?
937 "insmod option" : "autodetected");
939 cx23885_pci_quirks(dev
);
941 /* Assume some sensible defaults */
942 dev
->tuner_type
= cx23885_boards
[dev
->board
].tuner_type
;
943 dev
->tuner_addr
= cx23885_boards
[dev
->board
].tuner_addr
;
944 dev
->tuner_bus
= cx23885_boards
[dev
->board
].tuner_bus
;
945 dev
->radio_type
= cx23885_boards
[dev
->board
].radio_type
;
946 dev
->radio_addr
= cx23885_boards
[dev
->board
].radio_addr
;
948 dprintk(1, "%s() tuner_type = 0x%x tuner_addr = 0x%x tuner_bus = %d\n",
949 __func__
, dev
->tuner_type
, dev
->tuner_addr
, dev
->tuner_bus
);
950 dprintk(1, "%s() radio_type = 0x%x radio_addr = 0x%x\n",
951 __func__
, dev
->radio_type
, dev
->radio_addr
);
953 /* The cx23417 encoder has GPIO's that need to be initialised
954 * before DVB, so that demodulators and tuners are out of
955 * reset before DVB uses them.
957 if ((cx23885_boards
[dev
->board
].portb
== CX23885_MPEG_ENCODER
) ||
958 (cx23885_boards
[dev
->board
].portc
== CX23885_MPEG_ENCODER
))
959 cx23885_mc417_init(dev
);
964 cx23885_i2c_register(&dev
->i2c_bus
[0]);
965 cx23885_i2c_register(&dev
->i2c_bus
[1]);
966 cx23885_i2c_register(&dev
->i2c_bus
[2]);
967 cx23885_card_setup(dev
);
968 call_all(dev
, core
, s_power
, 0);
969 cx23885_ir_init(dev
);
971 if (dev
->board
== CX23885_BOARD_VIEWCAST_460E
) {
973 * GPIOs 9/8 are input detection bits for the breakout video
974 * (gpio 8) and audio (gpio 9) cables. When they're attached,
975 * this gpios are pulled high. Make sure these GPIOs are marked
978 cx23885_gpio_enable(dev
, 0x300, 0);
981 if (cx23885_boards
[dev
->board
].porta
== CX23885_ANALOG_VIDEO
) {
982 if (cx23885_video_register(dev
) < 0) {
983 pr_err("%s() Failed to register analog video adapters on VID_A\n",
988 if (cx23885_boards
[dev
->board
].portb
== CX23885_MPEG_DVB
) {
989 if (cx23885_boards
[dev
->board
].num_fds_portb
)
990 dev
->ts1
.num_frontends
=
991 cx23885_boards
[dev
->board
].num_fds_portb
;
992 if (cx23885_dvb_register(&dev
->ts1
) < 0) {
993 pr_err("%s() Failed to register dvb adapters on VID_B\n",
997 if (cx23885_boards
[dev
->board
].portb
== CX23885_MPEG_ENCODER
) {
998 if (cx23885_417_register(dev
) < 0) {
999 pr_err("%s() Failed to register 417 on VID_B\n",
1004 if (cx23885_boards
[dev
->board
].portc
== CX23885_MPEG_DVB
) {
1005 if (cx23885_boards
[dev
->board
].num_fds_portc
)
1006 dev
->ts2
.num_frontends
=
1007 cx23885_boards
[dev
->board
].num_fds_portc
;
1008 if (cx23885_dvb_register(&dev
->ts2
) < 0) {
1009 pr_err("%s() Failed to register dvb on VID_C\n",
1013 if (cx23885_boards
[dev
->board
].portc
== CX23885_MPEG_ENCODER
) {
1014 if (cx23885_417_register(dev
) < 0) {
1015 pr_err("%s() Failed to register 417 on VID_C\n",
1020 cx23885_dev_checkrevision(dev
);
1022 /* disable MSI for NetUP cards, otherwise CI is not working */
1023 if (cx23885_boards
[dev
->board
].ci_type
> 0)
1024 cx_clear(RDR_RDRCTL1
, 1 << 8);
1026 switch (dev
->board
) {
1027 case CX23885_BOARD_TEVII_S470
:
1028 case CX23885_BOARD_TEVII_S471
:
1029 cx_clear(RDR_RDRCTL1
, 1 << 8);
1036 static void cx23885_dev_unregister(struct cx23885_dev
*dev
)
1038 release_mem_region(pci_resource_start(dev
->pci
, 0),
1039 pci_resource_len(dev
->pci
, 0));
1041 if (!atomic_dec_and_test(&dev
->refcount
))
1044 if (cx23885_boards
[dev
->board
].porta
== CX23885_ANALOG_VIDEO
)
1045 cx23885_video_unregister(dev
);
1047 if (cx23885_boards
[dev
->board
].portb
== CX23885_MPEG_DVB
)
1048 cx23885_dvb_unregister(&dev
->ts1
);
1050 if (cx23885_boards
[dev
->board
].portb
== CX23885_MPEG_ENCODER
)
1051 cx23885_417_unregister(dev
);
1053 if (cx23885_boards
[dev
->board
].portc
== CX23885_MPEG_DVB
)
1054 cx23885_dvb_unregister(&dev
->ts2
);
1056 if (cx23885_boards
[dev
->board
].portc
== CX23885_MPEG_ENCODER
)
1057 cx23885_417_unregister(dev
);
1059 cx23885_i2c_unregister(&dev
->i2c_bus
[2]);
1060 cx23885_i2c_unregister(&dev
->i2c_bus
[1]);
1061 cx23885_i2c_unregister(&dev
->i2c_bus
[0]);
1063 iounmap(dev
->lmmio
);
1066 static __le32
*cx23885_risc_field(__le32
*rp
, struct scatterlist
*sglist
,
1067 unsigned int offset
, u32 sync_line
,
1068 unsigned int bpl
, unsigned int padding
,
1069 unsigned int lines
, unsigned int lpi
, bool jump
)
1071 struct scatterlist
*sg
;
1072 unsigned int line
, todo
, sol
;
1076 *(rp
++) = cpu_to_le32(RISC_JUMP
);
1077 *(rp
++) = cpu_to_le32(0);
1078 *(rp
++) = cpu_to_le32(0); /* bits 63-32 */
1081 /* sync instruction */
1082 if (sync_line
!= NO_SYNC_LINE
)
1083 *(rp
++) = cpu_to_le32(RISC_RESYNC
| sync_line
);
1087 for (line
= 0; line
< lines
; line
++) {
1088 while (offset
&& offset
>= sg_dma_len(sg
)) {
1089 offset
-= sg_dma_len(sg
);
1093 if (lpi
&& line
> 0 && !(line
% lpi
))
1094 sol
= RISC_SOL
| RISC_IRQ1
| RISC_CNT_INC
;
1098 if (bpl
<= sg_dma_len(sg
)-offset
) {
1099 /* fits into current chunk */
1100 *(rp
++) = cpu_to_le32(RISC_WRITE
|sol
|RISC_EOL
|bpl
);
1101 *(rp
++) = cpu_to_le32(sg_dma_address(sg
)+offset
);
1102 *(rp
++) = cpu_to_le32(0); /* bits 63-32 */
1105 /* scanline needs to be split */
1107 *(rp
++) = cpu_to_le32(RISC_WRITE
|sol
|
1108 (sg_dma_len(sg
)-offset
));
1109 *(rp
++) = cpu_to_le32(sg_dma_address(sg
)+offset
);
1110 *(rp
++) = cpu_to_le32(0); /* bits 63-32 */
1111 todo
-= (sg_dma_len(sg
)-offset
);
1114 while (todo
> sg_dma_len(sg
)) {
1115 *(rp
++) = cpu_to_le32(RISC_WRITE
|
1117 *(rp
++) = cpu_to_le32(sg_dma_address(sg
));
1118 *(rp
++) = cpu_to_le32(0); /* bits 63-32 */
1119 todo
-= sg_dma_len(sg
);
1122 *(rp
++) = cpu_to_le32(RISC_WRITE
|RISC_EOL
|todo
);
1123 *(rp
++) = cpu_to_le32(sg_dma_address(sg
));
1124 *(rp
++) = cpu_to_le32(0); /* bits 63-32 */
1133 int cx23885_risc_buffer(struct pci_dev
*pci
, struct cx23885_riscmem
*risc
,
1134 struct scatterlist
*sglist
, unsigned int top_offset
,
1135 unsigned int bottom_offset
, unsigned int bpl
,
1136 unsigned int padding
, unsigned int lines
)
1138 u32 instructions
, fields
;
1142 if (UNSET
!= top_offset
)
1144 if (UNSET
!= bottom_offset
)
1147 /* estimate risc mem: worst case is one write per page border +
1148 one write per scan line + syncs + jump (all 2 dwords). Padding
1149 can cause next bpl to start close to a page border. First DMA
1150 region may be smaller than PAGE_SIZE */
1151 /* write and jump need and extra dword */
1152 instructions
= fields
* (1 + ((bpl
+ padding
) * lines
)
1153 / PAGE_SIZE
+ lines
);
1155 risc
->size
= instructions
* 12;
1156 risc
->cpu
= pci_alloc_consistent(pci
, risc
->size
, &risc
->dma
);
1157 if (risc
->cpu
== NULL
)
1160 /* write risc instructions */
1162 if (UNSET
!= top_offset
)
1163 rp
= cx23885_risc_field(rp
, sglist
, top_offset
, 0,
1164 bpl
, padding
, lines
, 0, true);
1165 if (UNSET
!= bottom_offset
)
1166 rp
= cx23885_risc_field(rp
, sglist
, bottom_offset
, 0x200,
1167 bpl
, padding
, lines
, 0, UNSET
== top_offset
);
1169 /* save pointer to jmp instruction address */
1171 BUG_ON((risc
->jmp
- risc
->cpu
+ 2) * sizeof(*risc
->cpu
) > risc
->size
);
1175 int cx23885_risc_databuffer(struct pci_dev
*pci
,
1176 struct cx23885_riscmem
*risc
,
1177 struct scatterlist
*sglist
,
1179 unsigned int lines
, unsigned int lpi
)
1184 /* estimate risc mem: worst case is one write per page border +
1185 one write per scan line + syncs + jump (all 2 dwords). Here
1186 there is no padding and no sync. First DMA region may be smaller
1188 /* Jump and write need an extra dword */
1189 instructions
= 1 + (bpl
* lines
) / PAGE_SIZE
+ lines
;
1192 risc
->size
= instructions
* 12;
1193 risc
->cpu
= pci_alloc_consistent(pci
, risc
->size
, &risc
->dma
);
1194 if (risc
->cpu
== NULL
)
1197 /* write risc instructions */
1199 rp
= cx23885_risc_field(rp
, sglist
, 0, NO_SYNC_LINE
,
1200 bpl
, 0, lines
, lpi
, lpi
== 0);
1202 /* save pointer to jmp instruction address */
1204 BUG_ON((risc
->jmp
- risc
->cpu
+ 2) * sizeof(*risc
->cpu
) > risc
->size
);
1208 int cx23885_risc_vbibuffer(struct pci_dev
*pci
, struct cx23885_riscmem
*risc
,
1209 struct scatterlist
*sglist
, unsigned int top_offset
,
1210 unsigned int bottom_offset
, unsigned int bpl
,
1211 unsigned int padding
, unsigned int lines
)
1213 u32 instructions
, fields
;
1217 if (UNSET
!= top_offset
)
1219 if (UNSET
!= bottom_offset
)
1222 /* estimate risc mem: worst case is one write per page border +
1223 one write per scan line + syncs + jump (all 2 dwords). Padding
1224 can cause next bpl to start close to a page border. First DMA
1225 region may be smaller than PAGE_SIZE */
1226 /* write and jump need and extra dword */
1227 instructions
= fields
* (1 + ((bpl
+ padding
) * lines
)
1228 / PAGE_SIZE
+ lines
);
1230 risc
->size
= instructions
* 12;
1231 risc
->cpu
= pci_alloc_consistent(pci
, risc
->size
, &risc
->dma
);
1232 if (risc
->cpu
== NULL
)
1234 /* write risc instructions */
1237 /* Sync to line 6, so US CC line 21 will appear in line '12'
1238 * in the userland vbi payload */
1239 if (UNSET
!= top_offset
)
1240 rp
= cx23885_risc_field(rp
, sglist
, top_offset
, 0,
1241 bpl
, padding
, lines
, 0, true);
1243 if (UNSET
!= bottom_offset
)
1244 rp
= cx23885_risc_field(rp
, sglist
, bottom_offset
, 0x200,
1245 bpl
, padding
, lines
, 0, UNSET
== top_offset
);
1249 /* save pointer to jmp instruction address */
1251 BUG_ON((risc
->jmp
- risc
->cpu
+ 2) * sizeof(*risc
->cpu
) > risc
->size
);
1256 void cx23885_free_buffer(struct cx23885_dev
*dev
, struct cx23885_buffer
*buf
)
1258 struct cx23885_riscmem
*risc
= &buf
->risc
;
1260 BUG_ON(in_interrupt());
1261 pci_free_consistent(dev
->pci
, risc
->size
, risc
->cpu
, risc
->dma
);
1264 static void cx23885_tsport_reg_dump(struct cx23885_tsport
*port
)
1266 struct cx23885_dev
*dev
= port
->dev
;
1268 dprintk(1, "%s() Register Dump\n", __func__
);
1269 dprintk(1, "%s() DEV_CNTRL2 0x%08X\n", __func__
,
1270 cx_read(DEV_CNTRL2
));
1271 dprintk(1, "%s() PCI_INT_MSK 0x%08X\n", __func__
,
1272 cx23885_irq_get_mask(dev
));
1273 dprintk(1, "%s() AUD_INT_INT_MSK 0x%08X\n", __func__
,
1274 cx_read(AUDIO_INT_INT_MSK
));
1275 dprintk(1, "%s() AUD_INT_DMA_CTL 0x%08X\n", __func__
,
1276 cx_read(AUD_INT_DMA_CTL
));
1277 dprintk(1, "%s() AUD_EXT_INT_MSK 0x%08X\n", __func__
,
1278 cx_read(AUDIO_EXT_INT_MSK
));
1279 dprintk(1, "%s() AUD_EXT_DMA_CTL 0x%08X\n", __func__
,
1280 cx_read(AUD_EXT_DMA_CTL
));
1281 dprintk(1, "%s() PAD_CTRL 0x%08X\n", __func__
,
1283 dprintk(1, "%s() ALT_PIN_OUT_SEL 0x%08X\n", __func__
,
1284 cx_read(ALT_PIN_OUT_SEL
));
1285 dprintk(1, "%s() GPIO2 0x%08X\n", __func__
,
1287 dprintk(1, "%s() gpcnt(0x%08X) 0x%08X\n", __func__
,
1288 port
->reg_gpcnt
, cx_read(port
->reg_gpcnt
));
1289 dprintk(1, "%s() gpcnt_ctl(0x%08X) 0x%08x\n", __func__
,
1290 port
->reg_gpcnt_ctl
, cx_read(port
->reg_gpcnt_ctl
));
1291 dprintk(1, "%s() dma_ctl(0x%08X) 0x%08x\n", __func__
,
1292 port
->reg_dma_ctl
, cx_read(port
->reg_dma_ctl
));
1293 if (port
->reg_src_sel
)
1294 dprintk(1, "%s() src_sel(0x%08X) 0x%08x\n", __func__
,
1295 port
->reg_src_sel
, cx_read(port
->reg_src_sel
));
1296 dprintk(1, "%s() lngth(0x%08X) 0x%08x\n", __func__
,
1297 port
->reg_lngth
, cx_read(port
->reg_lngth
));
1298 dprintk(1, "%s() hw_sop_ctrl(0x%08X) 0x%08x\n", __func__
,
1299 port
->reg_hw_sop_ctrl
, cx_read(port
->reg_hw_sop_ctrl
));
1300 dprintk(1, "%s() gen_ctrl(0x%08X) 0x%08x\n", __func__
,
1301 port
->reg_gen_ctrl
, cx_read(port
->reg_gen_ctrl
));
1302 dprintk(1, "%s() bd_pkt_status(0x%08X) 0x%08x\n", __func__
,
1303 port
->reg_bd_pkt_status
, cx_read(port
->reg_bd_pkt_status
));
1304 dprintk(1, "%s() sop_status(0x%08X) 0x%08x\n", __func__
,
1305 port
->reg_sop_status
, cx_read(port
->reg_sop_status
));
1306 dprintk(1, "%s() fifo_ovfl_stat(0x%08X) 0x%08x\n", __func__
,
1307 port
->reg_fifo_ovfl_stat
, cx_read(port
->reg_fifo_ovfl_stat
));
1308 dprintk(1, "%s() vld_misc(0x%08X) 0x%08x\n", __func__
,
1309 port
->reg_vld_misc
, cx_read(port
->reg_vld_misc
));
1310 dprintk(1, "%s() ts_clk_en(0x%08X) 0x%08x\n", __func__
,
1311 port
->reg_ts_clk_en
, cx_read(port
->reg_ts_clk_en
));
1312 dprintk(1, "%s() ts_int_msk(0x%08X) 0x%08x\n", __func__
,
1313 port
->reg_ts_int_msk
, cx_read(port
->reg_ts_int_msk
));
1316 int cx23885_start_dma(struct cx23885_tsport
*port
,
1317 struct cx23885_dmaqueue
*q
,
1318 struct cx23885_buffer
*buf
)
1320 struct cx23885_dev
*dev
= port
->dev
;
1323 dprintk(1, "%s() w: %d, h: %d, f: %d\n", __func__
,
1324 dev
->width
, dev
->height
, dev
->field
);
1326 /* Stop the fifo and risc engine for this port */
1327 cx_clear(port
->reg_dma_ctl
, port
->dma_ctl_val
);
1329 /* setup fifo + format */
1330 cx23885_sram_channel_setup(dev
,
1331 &dev
->sram_channels
[port
->sram_chno
],
1332 port
->ts_packet_size
, buf
->risc
.dma
);
1334 cx23885_sram_channel_dump(dev
,
1335 &dev
->sram_channels
[port
->sram_chno
]);
1336 cx23885_risc_disasm(port
, &buf
->risc
);
1339 /* write TS length to chip */
1340 cx_write(port
->reg_lngth
, port
->ts_packet_size
);
1342 if ((!(cx23885_boards
[dev
->board
].portb
& CX23885_MPEG_DVB
)) &&
1343 (!(cx23885_boards
[dev
->board
].portc
& CX23885_MPEG_DVB
))) {
1344 pr_err("%s() Unsupported .portb/c (0x%08x)/(0x%08x)\n",
1346 cx23885_boards
[dev
->board
].portb
,
1347 cx23885_boards
[dev
->board
].portc
);
1351 if (cx23885_boards
[dev
->board
].portb
== CX23885_MPEG_ENCODER
)
1352 cx23885_av_clk(dev
, 0);
1356 /* If the port supports SRC SELECT, configure it */
1357 if (port
->reg_src_sel
)
1358 cx_write(port
->reg_src_sel
, port
->src_sel_val
);
1360 cx_write(port
->reg_hw_sop_ctrl
, port
->hw_sop_ctrl_val
);
1361 cx_write(port
->reg_ts_clk_en
, port
->ts_clk_en_val
);
1362 cx_write(port
->reg_vld_misc
, port
->vld_misc_val
);
1363 cx_write(port
->reg_gen_ctrl
, port
->gen_ctrl_val
);
1366 /* NOTE: this is 2 (reserved) for portb, does it matter? */
1367 /* reset counter to zero */
1368 cx_write(port
->reg_gpcnt_ctl
, 3);
1371 /* Set VIDB pins to input */
1372 if (cx23885_boards
[dev
->board
].portb
== CX23885_MPEG_DVB
) {
1373 reg
= cx_read(PAD_CTRL
);
1374 reg
&= ~0x3; /* Clear TS1_OE & TS1_SOP_OE */
1375 cx_write(PAD_CTRL
, reg
);
1378 /* Set VIDC pins to input */
1379 if (cx23885_boards
[dev
->board
].portc
== CX23885_MPEG_DVB
) {
1380 reg
= cx_read(PAD_CTRL
);
1381 reg
&= ~0x4; /* Clear TS2_SOP_OE */
1382 cx_write(PAD_CTRL
, reg
);
1385 if (cx23885_boards
[dev
->board
].portb
== CX23885_MPEG_ENCODER
) {
1387 reg
= cx_read(PAD_CTRL
);
1388 reg
= reg
& ~0x1; /* Clear TS1_OE */
1390 /* FIXME, bit 2 writing here is questionable */
1391 /* set TS1_SOP_OE and TS1_OE_HI */
1393 cx_write(PAD_CTRL
, reg
);
1395 /* FIXME and these two registers should be documented. */
1396 cx_write(CLK_DELAY
, cx_read(CLK_DELAY
) | 0x80000011);
1397 cx_write(ALT_PIN_OUT_SEL
, 0x10100045);
1400 switch (dev
->bridge
) {
1401 case CX23885_BRIDGE_885
:
1402 case CX23885_BRIDGE_887
:
1403 case CX23885_BRIDGE_888
:
1405 dprintk(1, "%s() enabling TS int's and DMA\n", __func__
);
1406 cx_set(port
->reg_ts_int_msk
, port
->ts_int_msk_val
);
1407 cx_set(port
->reg_dma_ctl
, port
->dma_ctl_val
);
1408 cx23885_irq_add(dev
, port
->pci_irqmask
);
1409 cx23885_irq_enable_all(dev
);
1415 cx_set(DEV_CNTRL2
, (1<<5)); /* Enable RISC controller */
1417 if (cx23885_boards
[dev
->board
].portb
== CX23885_MPEG_ENCODER
)
1418 cx23885_av_clk(dev
, 1);
1421 cx23885_tsport_reg_dump(port
);
1426 static int cx23885_stop_dma(struct cx23885_tsport
*port
)
1428 struct cx23885_dev
*dev
= port
->dev
;
1431 dprintk(1, "%s()\n", __func__
);
1433 /* Stop interrupts and DMA */
1434 cx_clear(port
->reg_ts_int_msk
, port
->ts_int_msk_val
);
1435 cx_clear(port
->reg_dma_ctl
, port
->dma_ctl_val
);
1437 if (cx23885_boards
[dev
->board
].portb
== CX23885_MPEG_ENCODER
) {
1439 reg
= cx_read(PAD_CTRL
);
1444 /* clear TS1_SOP_OE and TS1_OE_HI */
1446 cx_write(PAD_CTRL
, reg
);
1447 cx_write(port
->reg_src_sel
, 0);
1448 cx_write(port
->reg_gen_ctrl
, 8);
1452 if (cx23885_boards
[dev
->board
].portb
== CX23885_MPEG_ENCODER
)
1453 cx23885_av_clk(dev
, 0);
1458 /* ------------------------------------------------------------------ */
1460 int cx23885_buf_prepare(struct cx23885_buffer
*buf
, struct cx23885_tsport
*port
)
1462 struct cx23885_dev
*dev
= port
->dev
;
1463 int size
= port
->ts_packet_size
* port
->ts_packet_count
;
1464 struct sg_table
*sgt
= vb2_dma_sg_plane_desc(&buf
->vb
.vb2_buf
, 0);
1466 dprintk(1, "%s: %p\n", __func__
, buf
);
1467 if (vb2_plane_size(&buf
->vb
.vb2_buf
, 0) < size
)
1469 vb2_set_plane_payload(&buf
->vb
.vb2_buf
, 0, size
);
1471 cx23885_risc_databuffer(dev
->pci
, &buf
->risc
,
1473 port
->ts_packet_size
, port
->ts_packet_count
, 0);
1478 * The risc program for each buffer works as follows: it starts with a simple
1479 * 'JUMP to addr + 12', which is effectively a NOP. Then the code to DMA the
1480 * buffer follows and at the end we have a JUMP back to the start + 12 (skipping
1481 * the initial JUMP).
1483 * This is the risc program of the first buffer to be queued if the active list
1484 * is empty and it just keeps DMAing this buffer without generating any
1487 * If a new buffer is added then the initial JUMP in the code for that buffer
1488 * will generate an interrupt which signals that the previous buffer has been
1489 * DMAed successfully and that it can be returned to userspace.
1491 * It also sets the final jump of the previous buffer to the start of the new
1492 * buffer, thus chaining the new buffer into the DMA chain. This is a single
1493 * atomic u32 write, so there is no race condition.
1495 * The end-result of all this that you only get an interrupt when a buffer
1496 * is ready, so the control flow is very easy.
1498 void cx23885_buf_queue(struct cx23885_tsport
*port
, struct cx23885_buffer
*buf
)
1500 struct cx23885_buffer
*prev
;
1501 struct cx23885_dev
*dev
= port
->dev
;
1502 struct cx23885_dmaqueue
*cx88q
= &port
->mpegq
;
1503 unsigned long flags
;
1505 buf
->risc
.cpu
[1] = cpu_to_le32(buf
->risc
.dma
+ 12);
1506 buf
->risc
.jmp
[0] = cpu_to_le32(RISC_JUMP
| RISC_CNT_INC
);
1507 buf
->risc
.jmp
[1] = cpu_to_le32(buf
->risc
.dma
+ 12);
1508 buf
->risc
.jmp
[2] = cpu_to_le32(0); /* bits 63-32 */
1510 spin_lock_irqsave(&dev
->slock
, flags
);
1511 if (list_empty(&cx88q
->active
)) {
1512 list_add_tail(&buf
->queue
, &cx88q
->active
);
1513 dprintk(1, "[%p/%d] %s - first active\n",
1514 buf
, buf
->vb
.vb2_buf
.index
, __func__
);
1516 buf
->risc
.cpu
[0] |= cpu_to_le32(RISC_IRQ1
);
1517 prev
= list_entry(cx88q
->active
.prev
, struct cx23885_buffer
,
1519 list_add_tail(&buf
->queue
, &cx88q
->active
);
1520 prev
->risc
.jmp
[1] = cpu_to_le32(buf
->risc
.dma
);
1521 dprintk(1, "[%p/%d] %s - append to active\n",
1522 buf
, buf
->vb
.vb2_buf
.index
, __func__
);
1524 spin_unlock_irqrestore(&dev
->slock
, flags
);
1527 /* ----------------------------------------------------------- */
1529 static void do_cancel_buffers(struct cx23885_tsport
*port
, char *reason
)
1531 struct cx23885_dmaqueue
*q
= &port
->mpegq
;
1532 struct cx23885_buffer
*buf
;
1533 unsigned long flags
;
1535 spin_lock_irqsave(&port
->slock
, flags
);
1536 while (!list_empty(&q
->active
)) {
1537 buf
= list_entry(q
->active
.next
, struct cx23885_buffer
,
1539 list_del(&buf
->queue
);
1540 vb2_buffer_done(&buf
->vb
.vb2_buf
, VB2_BUF_STATE_ERROR
);
1541 dprintk(1, "[%p/%d] %s - dma=0x%08lx\n",
1542 buf
, buf
->vb
.vb2_buf
.index
, reason
,
1543 (unsigned long)buf
->risc
.dma
);
1545 spin_unlock_irqrestore(&port
->slock
, flags
);
1548 void cx23885_cancel_buffers(struct cx23885_tsport
*port
)
1550 dprintk(1, "%s()\n", __func__
);
1551 cx23885_stop_dma(port
);
1552 do_cancel_buffers(port
, "cancel");
1555 int cx23885_irq_417(struct cx23885_dev
*dev
, u32 status
)
1557 /* FIXME: port1 assumption here. */
1558 struct cx23885_tsport
*port
= &dev
->ts1
;
1565 count
= cx_read(port
->reg_gpcnt
);
1566 dprintk(7, "status: 0x%08x mask: 0x%08x count: 0x%x\n",
1567 status
, cx_read(port
->reg_ts_int_msk
), count
);
1569 if ((status
& VID_B_MSK_BAD_PKT
) ||
1570 (status
& VID_B_MSK_OPC_ERR
) ||
1571 (status
& VID_B_MSK_VBI_OPC_ERR
) ||
1572 (status
& VID_B_MSK_SYNC
) ||
1573 (status
& VID_B_MSK_VBI_SYNC
) ||
1574 (status
& VID_B_MSK_OF
) ||
1575 (status
& VID_B_MSK_VBI_OF
)) {
1576 pr_err("%s: V4L mpeg risc op code error, status = 0x%x\n",
1578 if (status
& VID_B_MSK_BAD_PKT
)
1579 dprintk(1, " VID_B_MSK_BAD_PKT\n");
1580 if (status
& VID_B_MSK_OPC_ERR
)
1581 dprintk(1, " VID_B_MSK_OPC_ERR\n");
1582 if (status
& VID_B_MSK_VBI_OPC_ERR
)
1583 dprintk(1, " VID_B_MSK_VBI_OPC_ERR\n");
1584 if (status
& VID_B_MSK_SYNC
)
1585 dprintk(1, " VID_B_MSK_SYNC\n");
1586 if (status
& VID_B_MSK_VBI_SYNC
)
1587 dprintk(1, " VID_B_MSK_VBI_SYNC\n");
1588 if (status
& VID_B_MSK_OF
)
1589 dprintk(1, " VID_B_MSK_OF\n");
1590 if (status
& VID_B_MSK_VBI_OF
)
1591 dprintk(1, " VID_B_MSK_VBI_OF\n");
1593 cx_clear(port
->reg_dma_ctl
, port
->dma_ctl_val
);
1594 cx23885_sram_channel_dump(dev
,
1595 &dev
->sram_channels
[port
->sram_chno
]);
1596 cx23885_417_check_encoder(dev
);
1597 } else if (status
& VID_B_MSK_RISCI1
) {
1598 dprintk(7, " VID_B_MSK_RISCI1\n");
1599 spin_lock(&port
->slock
);
1600 cx23885_wakeup(port
, &port
->mpegq
, count
);
1601 spin_unlock(&port
->slock
);
1604 cx_write(port
->reg_ts_int_stat
, status
);
1611 static int cx23885_irq_ts(struct cx23885_tsport
*port
, u32 status
)
1613 struct cx23885_dev
*dev
= port
->dev
;
1617 if ((status
& VID_BC_MSK_OPC_ERR
) ||
1618 (status
& VID_BC_MSK_BAD_PKT
) ||
1619 (status
& VID_BC_MSK_SYNC
) ||
1620 (status
& VID_BC_MSK_OF
)) {
1622 if (status
& VID_BC_MSK_OPC_ERR
)
1623 dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n",
1624 VID_BC_MSK_OPC_ERR
);
1626 if (status
& VID_BC_MSK_BAD_PKT
)
1627 dprintk(7, " (VID_BC_MSK_BAD_PKT 0x%08x)\n",
1628 VID_BC_MSK_BAD_PKT
);
1630 if (status
& VID_BC_MSK_SYNC
)
1631 dprintk(7, " (VID_BC_MSK_SYNC 0x%08x)\n",
1634 if (status
& VID_BC_MSK_OF
)
1635 dprintk(7, " (VID_BC_MSK_OF 0x%08x)\n",
1638 pr_err("%s: mpeg risc op code error\n", dev
->name
);
1640 cx_clear(port
->reg_dma_ctl
, port
->dma_ctl_val
);
1641 cx23885_sram_channel_dump(dev
,
1642 &dev
->sram_channels
[port
->sram_chno
]);
1644 } else if (status
& VID_BC_MSK_RISCI1
) {
1646 dprintk(7, " (RISCI1 0x%08x)\n", VID_BC_MSK_RISCI1
);
1648 spin_lock(&port
->slock
);
1649 count
= cx_read(port
->reg_gpcnt
);
1650 cx23885_wakeup(port
, &port
->mpegq
, count
);
1651 spin_unlock(&port
->slock
);
1655 cx_write(port
->reg_ts_int_stat
, status
);
1662 static irqreturn_t
cx23885_irq(int irq
, void *dev_id
)
1664 struct cx23885_dev
*dev
= dev_id
;
1665 struct cx23885_tsport
*ts1
= &dev
->ts1
;
1666 struct cx23885_tsport
*ts2
= &dev
->ts2
;
1667 u32 pci_status
, pci_mask
;
1668 u32 vida_status
, vida_mask
;
1669 u32 audint_status
, audint_mask
;
1670 u32 ts1_status
, ts1_mask
;
1671 u32 ts2_status
, ts2_mask
;
1672 int vida_count
= 0, ts1_count
= 0, ts2_count
= 0, handled
= 0;
1673 int audint_count
= 0;
1674 bool subdev_handled
;
1676 pci_status
= cx_read(PCI_INT_STAT
);
1677 pci_mask
= cx23885_irq_get_mask(dev
);
1678 vida_status
= cx_read(VID_A_INT_STAT
);
1679 vida_mask
= cx_read(VID_A_INT_MSK
);
1680 audint_status
= cx_read(AUDIO_INT_INT_STAT
);
1681 audint_mask
= cx_read(AUDIO_INT_INT_MSK
);
1682 ts1_status
= cx_read(VID_B_INT_STAT
);
1683 ts1_mask
= cx_read(VID_B_INT_MSK
);
1684 ts2_status
= cx_read(VID_C_INT_STAT
);
1685 ts2_mask
= cx_read(VID_C_INT_MSK
);
1687 if ((pci_status
== 0) && (ts2_status
== 0) && (ts1_status
== 0))
1690 vida_count
= cx_read(VID_A_GPCNT
);
1691 audint_count
= cx_read(AUD_INT_A_GPCNT
);
1692 ts1_count
= cx_read(ts1
->reg_gpcnt
);
1693 ts2_count
= cx_read(ts2
->reg_gpcnt
);
1694 dprintk(7, "pci_status: 0x%08x pci_mask: 0x%08x\n",
1695 pci_status
, pci_mask
);
1696 dprintk(7, "vida_status: 0x%08x vida_mask: 0x%08x count: 0x%x\n",
1697 vida_status
, vida_mask
, vida_count
);
1698 dprintk(7, "audint_status: 0x%08x audint_mask: 0x%08x count: 0x%x\n",
1699 audint_status
, audint_mask
, audint_count
);
1700 dprintk(7, "ts1_status: 0x%08x ts1_mask: 0x%08x count: 0x%x\n",
1701 ts1_status
, ts1_mask
, ts1_count
);
1702 dprintk(7, "ts2_status: 0x%08x ts2_mask: 0x%08x count: 0x%x\n",
1703 ts2_status
, ts2_mask
, ts2_count
);
1705 if (pci_status
& (PCI_MSK_RISC_RD
| PCI_MSK_RISC_WR
|
1706 PCI_MSK_AL_RD
| PCI_MSK_AL_WR
| PCI_MSK_APB_DMA
|
1707 PCI_MSK_VID_C
| PCI_MSK_VID_B
| PCI_MSK_VID_A
|
1708 PCI_MSK_AUD_INT
| PCI_MSK_AUD_EXT
|
1709 PCI_MSK_GPIO0
| PCI_MSK_GPIO1
|
1710 PCI_MSK_AV_CORE
| PCI_MSK_IR
)) {
1712 if (pci_status
& PCI_MSK_RISC_RD
)
1713 dprintk(7, " (PCI_MSK_RISC_RD 0x%08x)\n",
1716 if (pci_status
& PCI_MSK_RISC_WR
)
1717 dprintk(7, " (PCI_MSK_RISC_WR 0x%08x)\n",
1720 if (pci_status
& PCI_MSK_AL_RD
)
1721 dprintk(7, " (PCI_MSK_AL_RD 0x%08x)\n",
1724 if (pci_status
& PCI_MSK_AL_WR
)
1725 dprintk(7, " (PCI_MSK_AL_WR 0x%08x)\n",
1728 if (pci_status
& PCI_MSK_APB_DMA
)
1729 dprintk(7, " (PCI_MSK_APB_DMA 0x%08x)\n",
1732 if (pci_status
& PCI_MSK_VID_C
)
1733 dprintk(7, " (PCI_MSK_VID_C 0x%08x)\n",
1736 if (pci_status
& PCI_MSK_VID_B
)
1737 dprintk(7, " (PCI_MSK_VID_B 0x%08x)\n",
1740 if (pci_status
& PCI_MSK_VID_A
)
1741 dprintk(7, " (PCI_MSK_VID_A 0x%08x)\n",
1744 if (pci_status
& PCI_MSK_AUD_INT
)
1745 dprintk(7, " (PCI_MSK_AUD_INT 0x%08x)\n",
1748 if (pci_status
& PCI_MSK_AUD_EXT
)
1749 dprintk(7, " (PCI_MSK_AUD_EXT 0x%08x)\n",
1752 if (pci_status
& PCI_MSK_GPIO0
)
1753 dprintk(7, " (PCI_MSK_GPIO0 0x%08x)\n",
1756 if (pci_status
& PCI_MSK_GPIO1
)
1757 dprintk(7, " (PCI_MSK_GPIO1 0x%08x)\n",
1760 if (pci_status
& PCI_MSK_AV_CORE
)
1761 dprintk(7, " (PCI_MSK_AV_CORE 0x%08x)\n",
1764 if (pci_status
& PCI_MSK_IR
)
1765 dprintk(7, " (PCI_MSK_IR 0x%08x)\n",
1769 if (cx23885_boards
[dev
->board
].ci_type
== 1 &&
1770 (pci_status
& (PCI_MSK_GPIO1
| PCI_MSK_GPIO0
)))
1771 handled
+= netup_ci_slot_status(dev
, pci_status
);
1773 if (cx23885_boards
[dev
->board
].ci_type
== 2 &&
1774 (pci_status
& PCI_MSK_GPIO0
))
1775 handled
+= altera_ci_irq(dev
);
1778 if (cx23885_boards
[dev
->board
].portb
== CX23885_MPEG_DVB
)
1779 handled
+= cx23885_irq_ts(ts1
, ts1_status
);
1781 if (cx23885_boards
[dev
->board
].portb
== CX23885_MPEG_ENCODER
)
1782 handled
+= cx23885_irq_417(dev
, ts1_status
);
1786 if (cx23885_boards
[dev
->board
].portc
== CX23885_MPEG_DVB
)
1787 handled
+= cx23885_irq_ts(ts2
, ts2_status
);
1789 if (cx23885_boards
[dev
->board
].portc
== CX23885_MPEG_ENCODER
)
1790 handled
+= cx23885_irq_417(dev
, ts2_status
);
1794 handled
+= cx23885_video_irq(dev
, vida_status
);
1797 handled
+= cx23885_audio_irq(dev
, audint_status
, audint_mask
);
1799 if (pci_status
& PCI_MSK_IR
) {
1800 subdev_handled
= false;
1801 v4l2_subdev_call(dev
->sd_ir
, core
, interrupt_service_routine
,
1802 pci_status
, &subdev_handled
);
1807 if ((pci_status
& pci_mask
) & PCI_MSK_AV_CORE
) {
1808 cx23885_irq_disable(dev
, PCI_MSK_AV_CORE
);
1809 schedule_work(&dev
->cx25840_work
);
1814 cx_write(PCI_INT_STAT
, pci_status
);
1816 return IRQ_RETVAL(handled
);
1819 static void cx23885_v4l2_dev_notify(struct v4l2_subdev
*sd
,
1820 unsigned int notification
, void *arg
)
1822 struct cx23885_dev
*dev
;
1827 dev
= to_cx23885(sd
->v4l2_dev
);
1829 switch (notification
) {
1830 case V4L2_SUBDEV_IR_RX_NOTIFY
: /* Possibly called in an IRQ context */
1831 if (sd
== dev
->sd_ir
)
1832 cx23885_ir_rx_v4l2_dev_notify(sd
, *(u32
*)arg
);
1834 case V4L2_SUBDEV_IR_TX_NOTIFY
: /* Possibly called in an IRQ context */
1835 if (sd
== dev
->sd_ir
)
1836 cx23885_ir_tx_v4l2_dev_notify(sd
, *(u32
*)arg
);
1841 static void cx23885_v4l2_dev_notify_init(struct cx23885_dev
*dev
)
1843 INIT_WORK(&dev
->cx25840_work
, cx23885_av_work_handler
);
1844 INIT_WORK(&dev
->ir_rx_work
, cx23885_ir_rx_work_handler
);
1845 INIT_WORK(&dev
->ir_tx_work
, cx23885_ir_tx_work_handler
);
1846 dev
->v4l2_dev
.notify
= cx23885_v4l2_dev_notify
;
1849 static inline int encoder_on_portb(struct cx23885_dev
*dev
)
1851 return cx23885_boards
[dev
->board
].portb
== CX23885_MPEG_ENCODER
;
1854 static inline int encoder_on_portc(struct cx23885_dev
*dev
)
1856 return cx23885_boards
[dev
->board
].portc
== CX23885_MPEG_ENCODER
;
1859 /* Mask represents 32 different GPIOs, GPIO's are split into multiple
1860 * registers depending on the board configuration (and whether the
1861 * 417 encoder (wi it's own GPIO's) are present. Each GPIO bit will
1862 * be pushed into the correct hardware register, regardless of the
1863 * physical location. Certain registers are shared so we sanity check
1864 * and report errors if we think we're tampering with a GPIo that might
1865 * be assigned to the encoder (and used for the host bus).
1867 * GPIO 2 thru 0 - On the cx23885 bridge
1868 * GPIO 18 thru 3 - On the cx23417 host bus interface
1869 * GPIO 23 thru 19 - On the cx25840 a/v core
1871 void cx23885_gpio_set(struct cx23885_dev
*dev
, u32 mask
)
1874 cx_set(GP0_IO
, mask
& 0x7);
1876 if (mask
& 0x0007fff8) {
1877 if (encoder_on_portb(dev
) || encoder_on_portc(dev
))
1878 pr_err("%s: Setting GPIO on encoder ports\n",
1880 cx_set(MC417_RWD
, (mask
& 0x0007fff8) >> 3);
1884 if (mask
& 0x00f80000)
1885 pr_info("%s: Unsupported\n", dev
->name
);
1888 void cx23885_gpio_clear(struct cx23885_dev
*dev
, u32 mask
)
1890 if (mask
& 0x00000007)
1891 cx_clear(GP0_IO
, mask
& 0x7);
1893 if (mask
& 0x0007fff8) {
1894 if (encoder_on_portb(dev
) || encoder_on_portc(dev
))
1895 pr_err("%s: Clearing GPIO moving on encoder ports\n",
1897 cx_clear(MC417_RWD
, (mask
& 0x7fff8) >> 3);
1901 if (mask
& 0x00f80000)
1902 pr_info("%s: Unsupported\n", dev
->name
);
1905 u32
cx23885_gpio_get(struct cx23885_dev
*dev
, u32 mask
)
1907 if (mask
& 0x00000007)
1908 return (cx_read(GP0_IO
) >> 8) & mask
& 0x7;
1910 if (mask
& 0x0007fff8) {
1911 if (encoder_on_portb(dev
) || encoder_on_portc(dev
))
1912 pr_err("%s: Reading GPIO moving on encoder ports\n",
1914 return (cx_read(MC417_RWD
) & ((mask
& 0x7fff8) >> 3)) << 3;
1918 if (mask
& 0x00f80000)
1919 pr_info("%s: Unsupported\n", dev
->name
);
1924 void cx23885_gpio_enable(struct cx23885_dev
*dev
, u32 mask
, int asoutput
)
1926 if ((mask
& 0x00000007) && asoutput
)
1927 cx_set(GP0_IO
, (mask
& 0x7) << 16);
1928 else if ((mask
& 0x00000007) && !asoutput
)
1929 cx_clear(GP0_IO
, (mask
& 0x7) << 16);
1931 if (mask
& 0x0007fff8) {
1932 if (encoder_on_portb(dev
) || encoder_on_portc(dev
))
1933 pr_err("%s: Enabling GPIO on encoder ports\n",
1937 /* MC417_OEN is active low for output, write 1 for an input */
1938 if ((mask
& 0x0007fff8) && asoutput
)
1939 cx_clear(MC417_OEN
, (mask
& 0x7fff8) >> 3);
1941 else if ((mask
& 0x0007fff8) && !asoutput
)
1942 cx_set(MC417_OEN
, (mask
& 0x7fff8) >> 3);
1947 static int cx23885_initdev(struct pci_dev
*pci_dev
,
1948 const struct pci_device_id
*pci_id
)
1950 struct cx23885_dev
*dev
;
1951 struct v4l2_ctrl_handler
*hdl
;
1954 dev
= kzalloc(sizeof(*dev
), GFP_KERNEL
);
1958 err
= v4l2_device_register(&pci_dev
->dev
, &dev
->v4l2_dev
);
1962 hdl
= &dev
->ctrl_handler
;
1963 v4l2_ctrl_handler_init(hdl
, 6);
1968 dev
->v4l2_dev
.ctrl_handler
= hdl
;
1970 /* Prepare to handle notifications from subdevices */
1971 cx23885_v4l2_dev_notify_init(dev
);
1975 if (pci_enable_device(pci_dev
)) {
1980 if (cx23885_dev_setup(dev
) < 0) {
1985 /* print pci info */
1986 dev
->pci_rev
= pci_dev
->revision
;
1987 pci_read_config_byte(pci_dev
, PCI_LATENCY_TIMER
, &dev
->pci_lat
);
1988 pr_info("%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
1990 pci_name(pci_dev
), dev
->pci_rev
, pci_dev
->irq
,
1992 (unsigned long long)pci_resource_start(pci_dev
, 0));
1994 pci_set_master(pci_dev
);
1995 err
= pci_set_dma_mask(pci_dev
, 0xffffffff);
1997 pr_err("%s/0: Oops: no 32bit PCI DMA ???\n", dev
->name
);
2001 err
= request_irq(pci_dev
->irq
, cx23885_irq
,
2002 IRQF_SHARED
, dev
->name
, dev
);
2004 pr_err("%s: can't get IRQ %d\n",
2005 dev
->name
, pci_dev
->irq
);
2009 switch (dev
->board
) {
2010 case CX23885_BOARD_NETUP_DUAL_DVBS2_CI
:
2011 cx23885_irq_add_enable(dev
, PCI_MSK_GPIO1
| PCI_MSK_GPIO0
);
2013 case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF
:
2014 cx23885_irq_add_enable(dev
, PCI_MSK_GPIO0
);
2019 * The CX2388[58] IR controller can start firing interrupts when
2020 * enabled, so these have to take place after the cx23885_irq() handler
2021 * is hooked up by the call to request_irq() above.
2023 cx23885_ir_pci_int_enable(dev
);
2024 cx23885_input_init(dev
);
2029 cx23885_dev_unregister(dev
);
2031 v4l2_ctrl_handler_free(hdl
);
2032 v4l2_device_unregister(&dev
->v4l2_dev
);
2038 static void cx23885_finidev(struct pci_dev
*pci_dev
)
2040 struct v4l2_device
*v4l2_dev
= pci_get_drvdata(pci_dev
);
2041 struct cx23885_dev
*dev
= to_cx23885(v4l2_dev
);
2043 cx23885_input_fini(dev
);
2044 cx23885_ir_fini(dev
);
2046 cx23885_shutdown(dev
);
2048 /* unregister stuff */
2049 free_irq(pci_dev
->irq
, dev
);
2051 pci_disable_device(pci_dev
);
2053 cx23885_dev_unregister(dev
);
2054 v4l2_ctrl_handler_free(&dev
->ctrl_handler
);
2055 v4l2_device_unregister(v4l2_dev
);
2059 static struct pci_device_id cx23885_pci_tbl
[] = {
2064 .subvendor
= PCI_ANY_ID
,
2065 .subdevice
= PCI_ANY_ID
,
2070 .subvendor
= PCI_ANY_ID
,
2071 .subdevice
= PCI_ANY_ID
,
2073 /* --- end of list --- */
2076 MODULE_DEVICE_TABLE(pci
, cx23885_pci_tbl
);
2078 static struct pci_driver cx23885_pci_driver
= {
2080 .id_table
= cx23885_pci_tbl
,
2081 .probe
= cx23885_initdev
,
2082 .remove
= cx23885_finidev
,
2088 static int __init
cx23885_init(void)
2090 pr_info("cx23885 driver version %s loaded\n",
2092 return pci_register_driver(&cx23885_pci_driver
);
2095 static void __exit
cx23885_fini(void)
2097 pci_unregister_driver(&cx23885_pci_driver
);
2100 module_init(cx23885_init
);
2101 module_exit(cx23885_fini
);