2 ivtv driver initialization and card probing
3 Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
4 Copyright (C) 2004 Chris Kennedy <c@groovy.org>
5 Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 /* Main Driver file for the ivtv project:
23 * Driver for the Conexant CX23415/CX23416 chip.
24 * Author: Kevin Thayer (nufan_wfk at yahoo.com)
26 * http://www.ivtvdriver.org
29 * MPG600/MPG160 support by T.Adachi <tadachi@tadachi-net.com>
30 * and Takeru KOMORIYA<komoriya@paken.org>
32 * AVerMedia M179 GPIO info by Chris Pinkham <cpinkham@bc2va.org>
33 * using information provided by Jiun-Kuei Jung @ AVerMedia.
35 * Kurouto Sikou CX23416GYC-STVLP tested by K.Ohta <alpha292@bremen.or.jp>
36 * using information from T.Adachi,Takeru KOMORIYA and others :-)
38 * Nagase TRANSGEAR 5000TV, Aopen VA2000MAX-STN6 and I/O data GV-MVP/RX
39 * version by T.Adachi. Special thanks Mr.Suzuki
42 #include "ivtv-driver.h"
43 #include "ivtv-version.h"
44 #include "ivtv-fileops.h"
46 #include "ivtv-firmware.h"
47 #include "ivtv-queue.h"
48 #include "ivtv-udma.h"
50 #include "ivtv-mailbox.h"
51 #include "ivtv-streams.h"
52 #include "ivtv-ioctl.h"
53 #include "ivtv-cards.h"
55 #include "ivtv-routing.h"
56 #include "ivtv-controls.h"
57 #include "ivtv-gpio.h"
58 #include <linux/dma-mapping.h>
59 #include <media/tveeprom.h>
60 #include <media/i2c/saa7115.h>
61 #include "tuner-xc2028.h"
63 /* If you have already X v4l cards, then set this to X. This way
64 the device numbers stay matched. Example: you have a WinTV card
65 without radio and a PVR-350 with. Normally this would give a
66 video1 device together with a radio0 device for the PVR. By
67 setting this to 1 you ensure that radio0 is now also radio1. */
70 /* Callback for registering extensions */
71 int (*ivtv_ext_init
)(struct ivtv
*);
72 EXPORT_SYMBOL(ivtv_ext_init
);
74 /* add your revision and whatnot here */
75 static struct pci_device_id ivtv_pci_tbl
[] = {
76 {PCI_VENDOR_ID_ICOMP
, PCI_DEVICE_ID_IVTV15
,
77 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0},
78 {PCI_VENDOR_ID_ICOMP
, PCI_DEVICE_ID_IVTV16
,
79 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0},
83 MODULE_DEVICE_TABLE(pci
,ivtv_pci_tbl
);
85 /* ivtv instance counter */
86 static atomic_t ivtv_instance
= ATOMIC_INIT(0);
88 /* Parameter declarations */
89 static int cardtype
[IVTV_MAX_CARDS
];
90 static int tuner
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
91 -1, -1, -1, -1, -1, -1, -1, -1,
92 -1, -1, -1, -1, -1, -1, -1, -1,
93 -1, -1, -1, -1, -1, -1, -1, -1 };
94 static int radio
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
95 -1, -1, -1, -1, -1, -1, -1, -1,
96 -1, -1, -1, -1, -1, -1, -1, -1,
97 -1, -1, -1, -1, -1, -1, -1, -1 };
98 static int i2c_clock_period
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
99 -1, -1, -1, -1, -1, -1, -1, -1,
100 -1, -1, -1, -1, -1, -1, -1, -1,
101 -1, -1, -1, -1, -1, -1, -1, -1 };
103 static unsigned int cardtype_c
= 1;
104 static unsigned int tuner_c
= 1;
105 static int radio_c
= 1;
106 static unsigned int i2c_clock_period_c
= 1;
107 static char pal
[] = "---";
108 static char secam
[] = "--";
109 static char ntsc
[] = "-";
113 /* DMA Buffers, Default size in MB allocated */
114 #define IVTV_DEFAULT_ENC_MPG_BUFFERS 4
115 #define IVTV_DEFAULT_ENC_YUV_BUFFERS 2
116 #define IVTV_DEFAULT_ENC_VBI_BUFFERS 1
117 /* Exception: size in kB for this stream (MB is overkill) */
118 #define IVTV_DEFAULT_ENC_PCM_BUFFERS 320
119 #define IVTV_DEFAULT_DEC_MPG_BUFFERS 1
120 #define IVTV_DEFAULT_DEC_YUV_BUFFERS 1
121 /* Exception: size in kB for this stream (MB is way overkill) */
122 #define IVTV_DEFAULT_DEC_VBI_BUFFERS 64
124 static int enc_mpg_buffers
= IVTV_DEFAULT_ENC_MPG_BUFFERS
;
125 static int enc_yuv_buffers
= IVTV_DEFAULT_ENC_YUV_BUFFERS
;
126 static int enc_vbi_buffers
= IVTV_DEFAULT_ENC_VBI_BUFFERS
;
127 static int enc_pcm_buffers
= IVTV_DEFAULT_ENC_PCM_BUFFERS
;
128 static int dec_mpg_buffers
= IVTV_DEFAULT_DEC_MPG_BUFFERS
;
129 static int dec_yuv_buffers
= IVTV_DEFAULT_DEC_YUV_BUFFERS
;
130 static int dec_vbi_buffers
= IVTV_DEFAULT_DEC_VBI_BUFFERS
;
132 static int ivtv_yuv_mode
;
133 static int ivtv_yuv_threshold
= -1;
134 static int ivtv_pci_latency
= 1;
137 #ifdef CONFIG_VIDEO_ADV_DEBUG
141 static int tunertype
= -1;
142 static int newi2c
= -1;
144 module_param_array(tuner
, int, &tuner_c
, 0644);
145 module_param_array(radio
, int, &radio_c
, 0644);
146 module_param_array(cardtype
, int, &cardtype_c
, 0644);
147 module_param_string(pal
, pal
, sizeof(pal
), 0644);
148 module_param_string(secam
, secam
, sizeof(secam
), 0644);
149 module_param_string(ntsc
, ntsc
, sizeof(ntsc
), 0644);
150 module_param_named(debug
,ivtv_debug
, int, 0644);
151 #ifdef CONFIG_VIDEO_ADV_DEBUG
152 module_param_named(fw_debug
, ivtv_fw_debug
, int, 0644);
154 module_param(ivtv_pci_latency
, int, 0644);
155 module_param(ivtv_yuv_mode
, int, 0644);
156 module_param(ivtv_yuv_threshold
, int, 0644);
157 module_param(ivtv_first_minor
, int, 0644);
159 module_param(enc_mpg_buffers
, int, 0644);
160 module_param(enc_yuv_buffers
, int, 0644);
161 module_param(enc_vbi_buffers
, int, 0644);
162 module_param(enc_pcm_buffers
, int, 0644);
163 module_param(dec_mpg_buffers
, int, 0644);
164 module_param(dec_yuv_buffers
, int, 0644);
165 module_param(dec_vbi_buffers
, int, 0644);
167 module_param(tunertype
, int, 0644);
168 module_param(newi2c
, int, 0644);
169 module_param_array(i2c_clock_period
, int, &i2c_clock_period_c
, 0644);
171 MODULE_PARM_DESC(tuner
, "Tuner type selection,\n"
172 "\t\t\tsee tuner.h for values");
173 MODULE_PARM_DESC(radio
,
174 "Enable or disable the radio. Use only if autodetection\n"
175 "\t\t\tfails. 0 = disable, 1 = enable");
176 MODULE_PARM_DESC(cardtype
,
177 "Only use this option if your card is not detected properly.\n"
178 "\t\tSpecify card type:\n"
179 "\t\t\t 1 = WinTV PVR 250\n"
180 "\t\t\t 2 = WinTV PVR 350\n"
181 "\t\t\t 3 = WinTV PVR-150 or PVR-500\n"
182 "\t\t\t 4 = AVerMedia M179\n"
183 "\t\t\t 5 = YUAN MPG600/Kuroutoshikou iTVC16-STVLP\n"
184 "\t\t\t 6 = YUAN MPG160/Kuroutoshikou iTVC15-STVLP\n"
185 "\t\t\t 7 = YUAN PG600/DIAMONDMM PVR-550 (CX Falcon 2)\n"
186 "\t\t\t 8 = Adaptec AVC-2410\n"
187 "\t\t\t 9 = Adaptec AVC-2010\n"
188 "\t\t\t10 = NAGASE TRANSGEAR 5000TV\n"
189 "\t\t\t11 = AOpen VA2000MAX-STN6\n"
190 "\t\t\t12 = YUAN MPG600GR/Kuroutoshikou CX23416GYC-STVLP\n"
191 "\t\t\t13 = I/O Data GV-MVP/RX\n"
192 "\t\t\t14 = I/O Data GV-MVP/RX2E\n"
193 "\t\t\t15 = GOTVIEW PCI DVD\n"
194 "\t\t\t16 = GOTVIEW PCI DVD2 Deluxe\n"
195 "\t\t\t17 = Yuan MPC622\n"
196 "\t\t\t18 = Digital Cowboy DCT-MTVP1\n"
197 "\t\t\t19 = Yuan PG600V2/GotView PCI DVD Lite\n"
198 "\t\t\t20 = Club3D ZAP-TV1x01\n"
199 "\t\t\t21 = AverTV MCE 116 Plus\n"
200 "\t\t\t22 = ASUS Falcon2\n"
201 "\t\t\t23 = AverMedia PVR-150 Plus\n"
202 "\t\t\t24 = AverMedia EZMaker PCI Deluxe\n"
203 "\t\t\t25 = AverMedia M104 (not yet working)\n"
204 "\t\t\t26 = Buffalo PC-MV5L/PCI\n"
205 "\t\t\t27 = AVerMedia UltraTV 1500 MCE\n"
206 "\t\t\t28 = Sony VAIO Giga Pocket (ENX Kikyou)\n"
207 "\t\t\t 0 = Autodetect (default)\n"
208 "\t\t\t-1 = Ignore this card\n\t\t");
209 MODULE_PARM_DESC(pal
, "Set PAL standard: BGH, DK, I, M, N, Nc, 60");
210 MODULE_PARM_DESC(secam
, "Set SECAM standard: BGH, DK, L, LC");
211 MODULE_PARM_DESC(ntsc
, "Set NTSC standard: M, J (Japan), K (South Korea)");
212 MODULE_PARM_DESC(tunertype
,
213 "Specify tuner type:\n"
214 "\t\t\t 0 = tuner for PAL-B/G/H/D/K/I, SECAM-B/G/H/D/K/L/Lc\n"
215 "\t\t\t 1 = tuner for NTSC-M/J/K, PAL-M/N/Nc\n"
216 "\t\t\t-1 = Autodetect (default)\n");
217 MODULE_PARM_DESC(debug
,
218 "Debug level (bitmask). Default: 0\n"
219 "\t\t\t 1/0x0001: warning\n"
220 "\t\t\t 2/0x0002: info\n"
221 "\t\t\t 4/0x0004: mailbox\n"
222 "\t\t\t 8/0x0008: ioctl\n"
223 "\t\t\t 16/0x0010: file\n"
224 "\t\t\t 32/0x0020: dma\n"
225 "\t\t\t 64/0x0040: irq\n"
226 "\t\t\t 128/0x0080: decoder\n"
227 "\t\t\t 256/0x0100: yuv\n"
228 "\t\t\t 512/0x0200: i2c\n"
229 "\t\t\t1024/0x0400: high volume\n");
230 #ifdef CONFIG_VIDEO_ADV_DEBUG
231 MODULE_PARM_DESC(fw_debug
,
232 "Enable code for debugging firmware problems. Default: 0\n");
234 MODULE_PARM_DESC(ivtv_pci_latency
,
235 "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n"
236 "\t\t\tDefault: Yes");
237 MODULE_PARM_DESC(ivtv_yuv_mode
,
238 "Specify the yuv playback mode:\n"
239 "\t\t\t0 = interlaced\n\t\t\t1 = progressive\n\t\t\t2 = auto\n"
240 "\t\t\tDefault: 0 (interlaced)");
241 MODULE_PARM_DESC(ivtv_yuv_threshold
,
242 "If ivtv_yuv_mode is 2 (auto) then playback content as\n\t\tprogressive if src height <= ivtv_yuvthreshold\n"
243 "\t\t\tDefault: 480");
244 MODULE_PARM_DESC(enc_mpg_buffers
,
245 "Encoder MPG Buffers (in MB)\n"
246 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_MPG_BUFFERS
));
247 MODULE_PARM_DESC(enc_yuv_buffers
,
248 "Encoder YUV Buffers (in MB)\n"
249 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_YUV_BUFFERS
));
250 MODULE_PARM_DESC(enc_vbi_buffers
,
251 "Encoder VBI Buffers (in MB)\n"
252 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_VBI_BUFFERS
));
253 MODULE_PARM_DESC(enc_pcm_buffers
,
254 "Encoder PCM buffers (in kB)\n"
255 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_PCM_BUFFERS
));
256 MODULE_PARM_DESC(dec_mpg_buffers
,
257 "Decoder MPG buffers (in MB)\n"
258 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_MPG_BUFFERS
));
259 MODULE_PARM_DESC(dec_yuv_buffers
,
260 "Decoder YUV buffers (in MB)\n"
261 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_YUV_BUFFERS
));
262 MODULE_PARM_DESC(dec_vbi_buffers
,
263 "Decoder VBI buffers (in kB)\n"
264 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_VBI_BUFFERS
));
265 MODULE_PARM_DESC(newi2c
,
266 "Use new I2C implementation\n"
267 "\t\t\t-1 is autodetect, 0 is off, 1 is on\n"
268 "\t\t\tDefault is autodetect");
269 MODULE_PARM_DESC(i2c_clock_period
,
270 "Period of SCL for the I2C bus controlled by the CX23415/6\n"
271 "\t\t\tMin: 10 usec (100 kHz), Max: 4500 usec (222 Hz)\n"
272 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_I2C_CLOCK_PERIOD
));
274 MODULE_PARM_DESC(ivtv_first_minor
, "Set device node number assigned to first card");
276 MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil");
277 MODULE_DESCRIPTION("CX23415/CX23416 driver");
278 MODULE_SUPPORTED_DEVICE
279 ("CX23415/CX23416 MPEG2 encoder (WinTV PVR-150/250/350/500,\n"
280 "\t\t\tYuan MPG series and similar)");
281 MODULE_LICENSE("GPL");
283 MODULE_VERSION(IVTV_VERSION
);
285 #if defined(CONFIG_MODULES) && defined(MODULE)
286 static void request_module_async(struct work_struct
*work
)
288 struct ivtv
*dev
= container_of(work
, struct ivtv
, request_module_wk
);
290 /* Make sure ivtv-alsa module is loaded */
291 request_module("ivtv-alsa");
293 /* Initialize ivtv-alsa for this instance of the cx18 device */
294 if (ivtv_ext_init
!= NULL
)
298 static void request_modules(struct ivtv
*dev
)
300 INIT_WORK(&dev
->request_module_wk
, request_module_async
);
301 schedule_work(&dev
->request_module_wk
);
304 static void flush_request_modules(struct ivtv
*dev
)
306 flush_work(&dev
->request_module_wk
);
309 #define request_modules(dev)
310 #define flush_request_modules(dev)
311 #endif /* CONFIG_MODULES */
313 void ivtv_clear_irq_mask(struct ivtv
*itv
, u32 mask
)
315 itv
->irqmask
&= ~mask
;
316 write_reg_sync(itv
->irqmask
, IVTV_REG_IRQMASK
);
319 void ivtv_set_irq_mask(struct ivtv
*itv
, u32 mask
)
321 itv
->irqmask
|= mask
;
322 write_reg_sync(itv
->irqmask
, IVTV_REG_IRQMASK
);
325 int ivtv_set_output_mode(struct ivtv
*itv
, int mode
)
329 spin_lock(&itv
->lock
);
330 old_mode
= itv
->output_mode
;
332 itv
->output_mode
= old_mode
= mode
;
333 spin_unlock(&itv
->lock
);
337 struct ivtv_stream
*ivtv_get_output_stream(struct ivtv
*itv
)
339 switch (itv
->output_mode
) {
341 return &itv
->streams
[IVTV_DEC_STREAM_TYPE_MPG
];
343 return &itv
->streams
[IVTV_DEC_STREAM_TYPE_YUV
];
349 int ivtv_waitq(wait_queue_head_t
*waitq
)
353 prepare_to_wait(waitq
, &wait
, TASK_INTERRUPTIBLE
);
355 finish_wait(waitq
, &wait
);
356 return signal_pending(current
) ? -EINTR
: 0;
359 /* Generic utility functions */
360 int ivtv_msleep_timeout(unsigned int msecs
, int intr
)
362 int timeout
= msecs_to_jiffies(msecs
);
365 set_current_state(intr
? TASK_INTERRUPTIBLE
: TASK_UNINTERRUPTIBLE
);
366 timeout
= schedule_timeout(timeout
);
368 int ret
= signal_pending(current
);
377 /* Release ioremapped memory */
378 static void ivtv_iounmap(struct ivtv
*itv
)
383 /* Release registers memory */
384 if (itv
->reg_mem
!= NULL
) {
385 IVTV_DEBUG_INFO("releasing reg_mem\n");
386 iounmap(itv
->reg_mem
);
389 /* Release io memory */
390 if (itv
->has_cx23415
&& itv
->dec_mem
!= NULL
) {
391 IVTV_DEBUG_INFO("releasing dec_mem\n");
392 iounmap(itv
->dec_mem
);
396 /* Release io memory */
397 if (itv
->enc_mem
!= NULL
) {
398 IVTV_DEBUG_INFO("releasing enc_mem\n");
399 iounmap(itv
->enc_mem
);
404 /* Hauppauge card? get values from tveeprom */
405 void ivtv_read_eeprom(struct ivtv
*itv
, struct tveeprom
*tv
)
409 itv
->i2c_client
.addr
= 0xA0 >> 1;
410 tveeprom_read(&itv
->i2c_client
, eedata
, sizeof(eedata
));
411 tveeprom_hauppauge_analog(&itv
->i2c_client
, tv
, eedata
);
414 static void ivtv_process_eeprom(struct ivtv
*itv
)
417 int pci_slot
= PCI_SLOT(itv
->pdev
->devfn
);
419 ivtv_read_eeprom(itv
, &tv
);
421 /* Many thanks to Steven Toth from Hauppauge for providing the
424 /* In a few cases the PCI subsystem IDs do not correctly
425 identify the card. A better method is to check the
426 model number from the eeprom instead. */
427 case 30012 ... 30039: /* Low profile PVR250 */
428 case 32000 ... 32999:
429 case 48000 ... 48099: /* 48??? range are PVR250s with a cx23415 */
430 case 48400 ... 48599:
431 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_250
);
433 case 48100 ... 48399:
434 case 48600 ... 48999:
435 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_350
);
437 case 23000 ... 23999: /* PVR500 */
438 case 25000 ... 25999: /* Low profile PVR150 */
439 case 26000 ... 26999: /* Regular PVR150 */
440 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
443 IVTV_ERR("Invalid EEPROM\n");
446 IVTV_ERR("Unknown model %d, defaulting to PVR-150\n", tv
.model
);
447 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
452 /* Old style PVR350 (with an saa7114) uses this input for
455 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_350_V1
);
461 itv
->v4l2_cap
= itv
->card
->v4l2_capabilities
;
462 itv
->card_name
= itv
->card
->name
;
463 itv
->card_i2c
= itv
->card
->i2c
;
465 /* If this is a PVR500 then it should be possible to detect whether it is the
466 first or second unit by looking at the subsystem device ID: is bit 4 is
467 set, then it is the second unit (according to info from Hauppauge).
469 However, while this works for most cards, I have seen a few PVR500 cards
470 where both units have the same subsystem ID.
472 So instead I look at the reported 'PCI slot' (which is the slot on the PVR500
473 PCI bridge) and if it is 8, then it is assumed to be the first unit, otherwise
474 it is the second unit. It is possible that it is a different slot when ivtv is
475 used in Xen, in that case I ignore this card here. The worst that can happen
476 is that the card presents itself with a non-working radio device.
478 This detection is needed since the eeprom reports incorrectly that a radio is
479 present on the second unit. */
480 if (tv
.model
/ 1000 == 23) {
481 static const struct ivtv_card_tuner_i2c ivtv_i2c_radio
= {
482 .radio
= { 0x60, I2C_CLIENT_END
},
483 .demod
= { 0x43, I2C_CLIENT_END
},
484 .tv
= { 0x61, I2C_CLIENT_END
},
487 itv
->card_name
= "WinTV PVR 500";
488 itv
->card_i2c
= &ivtv_i2c_radio
;
489 if (pci_slot
== 8 || pci_slot
== 9) {
490 int is_first
= (pci_slot
& 1) == 0;
492 itv
->card_name
= is_first
? "WinTV PVR 500 (unit #1)" :
493 "WinTV PVR 500 (unit #2)";
495 IVTV_INFO("Correcting tveeprom data: no radio present on second unit\n");
500 IVTV_INFO("Autodetected %s\n", itv
->card_name
);
502 switch (tv
.tuner_hauppauge_model
) {
506 itv
->pvr150_workaround
= 1;
511 if (tv
.tuner_type
== TUNER_ABSENT
)
512 IVTV_ERR("tveeprom cannot autodetect tuner!\n");
514 if (itv
->options
.tuner
== -1)
515 itv
->options
.tuner
= tv
.tuner_type
;
516 if (itv
->options
.radio
== -1)
517 itv
->options
.radio
= (tv
.has_radio
!= 0);
518 /* only enable newi2c if an IR blaster is present */
519 if (itv
->options
.newi2c
== -1 && tv
.has_ir
) {
520 itv
->options
.newi2c
= (tv
.has_ir
& 4) ? 1 : 0;
521 if (itv
->options
.newi2c
) {
522 IVTV_INFO("Reopen i2c bus for IR-blaster support\n");
529 /* user specified tuner standard */
532 /* autodetect tuner standard */
533 if (tv
.tuner_formats
& V4L2_STD_PAL
) {
534 IVTV_DEBUG_INFO("PAL tuner detected\n");
535 itv
->std
|= V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
536 } else if (tv
.tuner_formats
& V4L2_STD_NTSC
) {
537 IVTV_DEBUG_INFO("NTSC tuner detected\n");
538 itv
->std
|= V4L2_STD_NTSC_M
;
539 } else if (tv
.tuner_formats
& V4L2_STD_SECAM
) {
540 IVTV_DEBUG_INFO("SECAM tuner detected\n");
541 itv
->std
|= V4L2_STD_SECAM_L
;
543 IVTV_INFO("No tuner detected, default to NTSC-M\n");
544 itv
->std
|= V4L2_STD_NTSC_M
;
548 static v4l2_std_id
ivtv_parse_std(struct ivtv
*itv
)
553 return V4L2_STD_PAL_60
;
561 return V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
565 if (pal
[1] == 'c' || pal
[1] == 'C')
566 return V4L2_STD_PAL_Nc
;
567 return V4L2_STD_PAL_N
;
571 return V4L2_STD_PAL_I
;
577 return V4L2_STD_PAL_DK
;
581 return V4L2_STD_PAL_M
;
585 IVTV_WARN("pal= argument not recognised\n");
597 return V4L2_STD_SECAM_B
| V4L2_STD_SECAM_G
| V4L2_STD_SECAM_H
;
603 return V4L2_STD_SECAM_DK
;
607 if (secam
[1] == 'C' || secam
[1] == 'c')
608 return V4L2_STD_SECAM_LC
;
609 return V4L2_STD_SECAM_L
;
613 IVTV_WARN("secam= argument not recognised\n");
621 return V4L2_STD_NTSC_M
;
625 return V4L2_STD_NTSC_M_JP
;
629 return V4L2_STD_NTSC_M_KR
;
633 IVTV_WARN("ntsc= argument not recognised\n");
641 static void ivtv_process_options(struct ivtv
*itv
)
643 const char *chipname
;
646 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_MPG
] = enc_mpg_buffers
* 1024;
647 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_YUV
] = enc_yuv_buffers
* 1024;
648 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_VBI
] = enc_vbi_buffers
* 1024;
649 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_PCM
] = enc_pcm_buffers
;
650 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_MPG
] = dec_mpg_buffers
* 1024;
651 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_YUV
] = dec_yuv_buffers
* 1024;
652 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_VBI
] = dec_vbi_buffers
;
653 itv
->options
.cardtype
= cardtype
[itv
->instance
];
654 itv
->options
.tuner
= tuner
[itv
->instance
];
655 itv
->options
.radio
= radio
[itv
->instance
];
657 itv
->options
.i2c_clock_period
= i2c_clock_period
[itv
->instance
];
658 if (itv
->options
.i2c_clock_period
== -1)
659 itv
->options
.i2c_clock_period
= IVTV_DEFAULT_I2C_CLOCK_PERIOD
;
660 else if (itv
->options
.i2c_clock_period
< 10)
661 itv
->options
.i2c_clock_period
= 10;
662 else if (itv
->options
.i2c_clock_period
> 4500)
663 itv
->options
.i2c_clock_period
= 4500;
665 itv
->options
.newi2c
= newi2c
;
666 if (tunertype
< -1 || tunertype
> 1) {
667 IVTV_WARN("Invalid tunertype argument, will autodetect instead\n");
670 itv
->std
= ivtv_parse_std(itv
);
671 if (itv
->std
== 0 && tunertype
>= 0)
672 itv
->std
= tunertype
? V4L2_STD_MN
: (V4L2_STD_ALL
& ~V4L2_STD_MN
);
673 itv
->has_cx23415
= (itv
->pdev
->device
== PCI_DEVICE_ID_IVTV15
);
674 chipname
= itv
->has_cx23415
? "cx23415" : "cx23416";
675 if (itv
->options
.cardtype
== -1) {
676 IVTV_INFO("Ignore card (detected %s based chip)\n", chipname
);
679 if ((itv
->card
= ivtv_get_card(itv
->options
.cardtype
- 1))) {
680 IVTV_INFO("User specified %s card (detected %s based chip)\n",
681 itv
->card
->name
, chipname
);
682 } else if (itv
->options
.cardtype
!= 0) {
683 IVTV_ERR("Unknown user specified type, trying to autodetect card\n");
685 if (itv
->card
== NULL
) {
686 if (itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE
||
687 itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE_ALT1
||
688 itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE_ALT2
) {
689 itv
->card
= ivtv_get_card(itv
->has_cx23415
? IVTV_CARD_PVR_350
: IVTV_CARD_PVR_150
);
690 IVTV_INFO("Autodetected Hauppauge card (%s based)\n",
694 if (itv
->card
== NULL
) {
695 for (i
= 0; (itv
->card
= ivtv_get_card(i
)); i
++) {
696 if (itv
->card
->pci_list
== NULL
)
698 for (j
= 0; itv
->card
->pci_list
[j
].device
; j
++) {
699 if (itv
->pdev
->device
!=
700 itv
->card
->pci_list
[j
].device
)
702 if (itv
->pdev
->subsystem_vendor
!=
703 itv
->card
->pci_list
[j
].subsystem_vendor
)
705 if (itv
->pdev
->subsystem_device
!=
706 itv
->card
->pci_list
[j
].subsystem_device
)
708 IVTV_INFO("Autodetected %s card (%s based)\n",
709 itv
->card
->name
, chipname
);
716 if (itv
->card
== NULL
) {
717 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
718 IVTV_ERR("Unknown card: vendor/device: [%04x:%04x]\n",
719 itv
->pdev
->vendor
, itv
->pdev
->device
);
720 IVTV_ERR(" subsystem vendor/device: [%04x:%04x]\n",
721 itv
->pdev
->subsystem_vendor
, itv
->pdev
->subsystem_device
);
722 IVTV_ERR(" %s based\n", chipname
);
723 IVTV_ERR("Defaulting to %s card\n", itv
->card
->name
);
724 IVTV_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n");
725 IVTV_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n");
726 IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n");
728 itv
->v4l2_cap
= itv
->card
->v4l2_capabilities
;
729 itv
->card_name
= itv
->card
->name
;
730 itv
->card_i2c
= itv
->card
->i2c
;
733 /* Precondition: the ivtv structure has been memset to 0. Only
734 the dev and num fields have been filled in.
735 No assumptions on the card type may be made here (see ivtv_init_struct2
738 static int ivtv_init_struct1(struct ivtv
*itv
)
740 struct sched_param param
= { .sched_priority
= 99 };
742 itv
->base_addr
= pci_resource_start(itv
->pdev
, 0);
743 itv
->enc_mbox
.max_mbox
= 2; /* the encoder has 3 mailboxes (0-2) */
744 itv
->dec_mbox
.max_mbox
= 1; /* the decoder has 2 mailboxes (0-1) */
746 mutex_init(&itv
->serialize_lock
);
747 mutex_init(&itv
->i2c_bus_lock
);
748 mutex_init(&itv
->udma
.lock
);
750 spin_lock_init(&itv
->lock
);
751 spin_lock_init(&itv
->dma_reg_lock
);
753 kthread_init_worker(&itv
->irq_worker
);
754 itv
->irq_worker_task
= kthread_run(kthread_worker_fn
, &itv
->irq_worker
,
755 "%s", itv
->v4l2_dev
.name
);
756 if (IS_ERR(itv
->irq_worker_task
)) {
757 IVTV_ERR("Could not create ivtv task\n");
760 /* must use the FIFO scheduler as it is realtime sensitive */
761 sched_setscheduler(itv
->irq_worker_task
, SCHED_FIFO
, ¶m
);
763 kthread_init_work(&itv
->irq_work
, ivtv_irq_work_handler
);
765 /* Initial settings */
766 itv
->cxhdl
.port
= CX2341X_PORT_MEMORY
;
767 itv
->cxhdl
.capabilities
= CX2341X_CAP_HAS_SLICED_VBI
;
768 init_waitqueue_head(&itv
->eos_waitq
);
769 init_waitqueue_head(&itv
->event_waitq
);
770 init_waitqueue_head(&itv
->vsync_waitq
);
771 init_waitqueue_head(&itv
->dma_waitq
);
772 init_timer(&itv
->dma_timer
);
773 itv
->dma_timer
.function
= ivtv_unfinished_dma
;
774 itv
->dma_timer
.data
= (unsigned long)itv
;
776 itv
->cur_dma_stream
= -1;
777 itv
->cur_pio_stream
= -1;
783 itv
->vbi
.in
.type
= V4L2_BUF_TYPE_VBI_CAPTURE
;
784 itv
->vbi
.sliced_in
= &itv
->vbi
.in
.fmt
.sliced
;
786 /* Init the sg table for osd/yuv output */
787 sg_init_table(itv
->udma
.SGlist
, IVTV_DMA_SG_OSD_ENT
);
790 itv
->osd_global_alpha_state
= 1;
791 itv
->osd_global_alpha
= 255;
794 atomic_set(&itv
->yuv_info
.next_dma_frame
, -1);
795 itv
->yuv_info
.lace_mode
= ivtv_yuv_mode
;
796 itv
->yuv_info
.lace_threshold
= ivtv_yuv_threshold
;
797 itv
->yuv_info
.max_frames_buffered
= 3;
798 itv
->yuv_info
.track_osd
= 1;
802 /* Second initialization part. Here the card type has been
804 static void ivtv_init_struct2(struct ivtv
*itv
)
808 for (i
= 0; i
< IVTV_CARD_MAX_VIDEO_INPUTS
; i
++)
809 if (itv
->card
->video_inputs
[i
].video_type
== 0)
812 for (i
= 0; i
< IVTV_CARD_MAX_AUDIO_INPUTS
; i
++)
813 if (itv
->card
->audio_inputs
[i
].audio_type
== 0)
815 itv
->nof_audio_inputs
= i
;
817 if (itv
->card
->hw_all
& IVTV_HW_CX25840
) {
818 itv
->vbi
.sliced_size
= 288; /* multiple of 16, real size = 284 */
820 itv
->vbi
.sliced_size
= 64; /* multiple of 16, real size = 52 */
823 /* Find tuner input */
824 for (i
= 0; i
< itv
->nof_inputs
; i
++) {
825 if (itv
->card
->video_inputs
[i
].video_type
==
826 IVTV_CARD_INPUT_VID_TUNER
)
829 if (i
>= itv
->nof_inputs
)
831 itv
->active_input
= i
;
832 itv
->audio_input
= itv
->card
->video_inputs
[i
].audio_index
;
835 static int ivtv_setup_pci(struct ivtv
*itv
, struct pci_dev
*pdev
,
836 const struct pci_device_id
*pci_id
)
839 unsigned char pci_latency
;
841 IVTV_DEBUG_INFO("Enabling pci device\n");
843 if (pci_enable_device(pdev
)) {
844 IVTV_ERR("Can't enable device!\n");
847 if (pci_set_dma_mask(pdev
, DMA_BIT_MASK(32))) {
848 IVTV_ERR("No suitable DMA available.\n");
851 if (!request_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
, "ivtv encoder")) {
852 IVTV_ERR("Cannot request encoder memory region.\n");
856 if (!request_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
,
857 IVTV_REG_SIZE
, "ivtv registers")) {
858 IVTV_ERR("Cannot request register memory region.\n");
859 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
863 if (itv
->has_cx23415
&&
864 !request_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
,
865 IVTV_DECODER_SIZE
, "ivtv decoder")) {
866 IVTV_ERR("Cannot request decoder memory region.\n");
867 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
868 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
872 /* Check for bus mastering */
873 pci_read_config_word(pdev
, PCI_COMMAND
, &cmd
);
874 if (!(cmd
& PCI_COMMAND_MASTER
)) {
875 IVTV_DEBUG_INFO("Attempting to enable Bus Mastering\n");
876 pci_set_master(pdev
);
877 pci_read_config_word(pdev
, PCI_COMMAND
, &cmd
);
878 if (!(cmd
& PCI_COMMAND_MASTER
)) {
879 IVTV_ERR("Bus Mastering is not enabled\n");
883 IVTV_DEBUG_INFO("Bus Mastering Enabled.\n");
885 pci_read_config_byte(pdev
, PCI_LATENCY_TIMER
, &pci_latency
);
887 if (pci_latency
< 64 && ivtv_pci_latency
) {
888 IVTV_INFO("Unreasonably low latency timer, setting to 64 (was %d)\n",
890 pci_write_config_byte(pdev
, PCI_LATENCY_TIMER
, 64);
891 pci_read_config_byte(pdev
, PCI_LATENCY_TIMER
, &pci_latency
);
893 /* This config space value relates to DMA latencies. The
894 default value 0x8080 is too low however and will lead
895 to DMA errors. 0xffff is the max value which solves
897 pci_write_config_dword(pdev
, 0x40, 0xffff);
899 IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, irq: %d, latency: %d, memory: 0x%llx\n",
900 pdev
->device
, pdev
->revision
, pdev
->bus
->number
,
901 PCI_SLOT(pdev
->devfn
), PCI_FUNC(pdev
->devfn
),
902 pdev
->irq
, pci_latency
, (u64
)itv
->base_addr
);
907 static void ivtv_load_and_init_modules(struct ivtv
*itv
)
909 u32 hw
= itv
->card
->hw_all
;
912 /* check which i2c devices are actually found */
913 for (i
= 0; i
< 32; i
++) {
918 if (device
== IVTV_HW_GPIO
|| device
== IVTV_HW_TVEEPROM
) {
919 /* GPIO and TVEEPROM do not use i2c probing */
920 itv
->hw_flags
|= device
;
923 if (ivtv_i2c_register(itv
, i
) == 0)
924 itv
->hw_flags
|= device
;
927 /* probe for legacy IR controllers that aren't in card definitions */
928 if ((itv
->hw_flags
& IVTV_HW_IR_ANY
) == 0)
929 ivtv_i2c_new_ir_legacy(itv
);
931 if (itv
->card
->hw_all
& IVTV_HW_CX25840
)
932 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_CX25840
);
933 else if (itv
->card
->hw_all
& IVTV_HW_SAA717X
)
934 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA717X
);
935 else if (itv
->card
->hw_all
& IVTV_HW_SAA7114
)
936 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA7114
);
938 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA7115
);
939 itv
->sd_audio
= ivtv_find_hw(itv
, itv
->card
->hw_audio_ctrl
);
940 itv
->sd_muxer
= ivtv_find_hw(itv
, itv
->card
->hw_muxer
);
944 if (itv
->card
->type
== IVTV_CARD_CX23416GYC
) {
945 /* Several variations of this card exist, detect which card
946 type should be used. */
947 if ((hw
& (IVTV_HW_UPD64031A
| IVTV_HW_UPD6408X
)) == 0)
948 itv
->card
= ivtv_get_card(IVTV_CARD_CX23416GYC_NOGRYCS
);
949 else if ((hw
& IVTV_HW_UPD64031A
) == 0)
950 itv
->card
= ivtv_get_card(IVTV_CARD_CX23416GYC_NOGR
);
952 else if (itv
->card
->type
== IVTV_CARD_GV_MVPRX
||
953 itv
->card
->type
== IVTV_CARD_GV_MVPRX2E
) {
954 /* The crystal frequency of GVMVPRX is 24.576MHz */
955 v4l2_subdev_call(itv
->sd_video
, video
, s_crystal_freq
,
956 SAA7115_FREQ_24_576_MHZ
, SAA7115_FREQ_FL_UCGC
);
959 if (hw
& IVTV_HW_CX25840
) {
960 itv
->vbi
.raw_decoder_line_size
= 1444;
961 itv
->vbi
.raw_decoder_sav_odd_field
= 0x20;
962 itv
->vbi
.raw_decoder_sav_even_field
= 0x60;
963 itv
->vbi
.sliced_decoder_line_size
= 272;
964 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xB0;
965 itv
->vbi
.sliced_decoder_sav_even_field
= 0xF0;
968 if (hw
& IVTV_HW_SAA711X
) {
969 /* determine the exact saa711x model */
970 itv
->hw_flags
&= ~IVTV_HW_SAA711X
;
972 if (strstr(itv
->sd_video
->name
, "saa7114")) {
973 itv
->hw_flags
|= IVTV_HW_SAA7114
;
974 /* VBI is not yet supported by the saa7114 driver. */
975 itv
->v4l2_cap
&= ~(V4L2_CAP_SLICED_VBI_CAPTURE
|V4L2_CAP_VBI_CAPTURE
);
977 itv
->hw_flags
|= IVTV_HW_SAA7115
;
979 itv
->vbi
.raw_decoder_line_size
= 1443;
980 itv
->vbi
.raw_decoder_sav_odd_field
= 0x25;
981 itv
->vbi
.raw_decoder_sav_even_field
= 0x62;
982 itv
->vbi
.sliced_decoder_line_size
= 51;
983 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xAB;
984 itv
->vbi
.sliced_decoder_sav_even_field
= 0xEC;
987 if (hw
& IVTV_HW_SAA717X
) {
988 itv
->vbi
.raw_decoder_line_size
= 1443;
989 itv
->vbi
.raw_decoder_sav_odd_field
= 0x25;
990 itv
->vbi
.raw_decoder_sav_even_field
= 0x62;
991 itv
->vbi
.sliced_decoder_line_size
= 51;
992 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xAB;
993 itv
->vbi
.sliced_decoder_sav_even_field
= 0xEC;
997 static int ivtv_probe(struct pci_dev
*pdev
, const struct pci_device_id
*pci_id
)
1003 itv
= kzalloc(sizeof(struct ivtv
), GFP_ATOMIC
);
1007 itv
->instance
= v4l2_device_set_name(&itv
->v4l2_dev
, "ivtv",
1010 retval
= v4l2_device_register(&pdev
->dev
, &itv
->v4l2_dev
);
1015 IVTV_INFO("Initializing card %d\n", itv
->instance
);
1017 ivtv_process_options(itv
);
1018 if (itv
->options
.cardtype
== -1) {
1022 if (ivtv_init_struct1(itv
)) {
1026 retval
= cx2341x_handler_init(&itv
->cxhdl
, 50);
1029 itv
->v4l2_dev
.ctrl_handler
= &itv
->cxhdl
.hdl
;
1030 itv
->cxhdl
.ops
= &ivtv_cxhdl_ops
;
1031 itv
->cxhdl
.priv
= itv
;
1032 itv
->cxhdl
.func
= ivtv_api_func
;
1034 IVTV_DEBUG_INFO("base addr: 0x%llx\n", (u64
)itv
->base_addr
);
1036 /* PCI Device Setup */
1037 retval
= ivtv_setup_pci(itv
, pdev
, pci_id
);
1040 if (retval
== -ENXIO
)
1044 IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
1045 (u64
)itv
->base_addr
+ IVTV_ENCODER_OFFSET
, IVTV_ENCODER_SIZE
);
1046 itv
->enc_mem
= ioremap_nocache(itv
->base_addr
+ IVTV_ENCODER_OFFSET
,
1048 if (!itv
->enc_mem
) {
1049 IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 encoder memory\n");
1050 IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of vmalloc address space for this window\n");
1051 IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
1052 IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
1057 if (itv
->has_cx23415
) {
1058 IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
1059 (u64
)itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1060 itv
->dec_mem
= ioremap_nocache(itv
->base_addr
+ IVTV_DECODER_OFFSET
,
1062 if (!itv
->dec_mem
) {
1063 IVTV_ERR("ioremap failed. Can't get a window into CX23415 decoder memory\n");
1064 IVTV_ERR("Each capture card with a CX23415 needs 8 MB of vmalloc address space for this window\n");
1065 IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
1066 IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
1072 itv
->dec_mem
= itv
->enc_mem
;
1075 /* map registers memory */
1076 IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
1077 (u64
)itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1079 ioremap_nocache(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1080 if (!itv
->reg_mem
) {
1081 IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 register space\n");
1082 IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of vmalloc address space for this window\n");
1083 IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
1084 IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
1089 retval
= ivtv_gpio_init(itv
);
1094 IVTV_DEBUG_INFO("activating i2c...\n");
1095 if (init_ivtv_i2c(itv
)) {
1096 IVTV_ERR("Could not initialize i2c\n");
1100 if (itv
->card
->hw_all
& IVTV_HW_TVEEPROM
) {
1101 /* Based on the model number the cardtype may be changed.
1102 The PCI IDs are not always reliable. */
1103 ivtv_process_eeprom(itv
);
1105 if (itv
->card
->comment
)
1106 IVTV_INFO("%s", itv
->card
->comment
);
1107 if (itv
->card
->v4l2_capabilities
== 0) {
1108 /* card was detected but is not supported */
1113 if (itv
->std
== 0) {
1114 itv
->std
= V4L2_STD_NTSC_M
;
1117 if (itv
->options
.tuner
== -1) {
1120 for (i
= 0; i
< IVTV_CARD_MAX_TUNERS
; i
++) {
1121 if ((itv
->std
& itv
->card
->tuners
[i
].std
) == 0)
1123 itv
->options
.tuner
= itv
->card
->tuners
[i
].tuner
;
1127 /* if no tuner was found, then pick the first tuner in the card list */
1128 if (itv
->options
.tuner
== -1 && itv
->card
->tuners
[0].std
) {
1129 itv
->std
= itv
->card
->tuners
[0].std
;
1130 if (itv
->std
& V4L2_STD_PAL
)
1131 itv
->std
= V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
1132 else if (itv
->std
& V4L2_STD_NTSC
)
1133 itv
->std
= V4L2_STD_NTSC_M
;
1134 else if (itv
->std
& V4L2_STD_SECAM
)
1135 itv
->std
= V4L2_STD_SECAM_L
;
1136 itv
->options
.tuner
= itv
->card
->tuners
[0].tuner
;
1138 if (itv
->options
.radio
== -1)
1139 itv
->options
.radio
= (itv
->card
->radio_input
.audio_type
!= 0);
1141 /* The card is now fully identified, continue with card-specific
1143 ivtv_init_struct2(itv
);
1145 ivtv_load_and_init_modules(itv
);
1147 if (itv
->std
& V4L2_STD_525_60
) {
1149 itv
->is_out_60hz
= 1;
1152 itv
->is_out_50hz
= 1;
1155 itv
->yuv_info
.osd_full_w
= 720;
1156 itv
->yuv_info
.osd_full_h
= itv
->is_out_50hz
? 576 : 480;
1157 itv
->yuv_info
.v4l2_src_w
= itv
->yuv_info
.osd_full_w
;
1158 itv
->yuv_info
.v4l2_src_h
= itv
->yuv_info
.osd_full_h
;
1160 cx2341x_handler_set_50hz(&itv
->cxhdl
, itv
->is_50hz
);
1162 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_MPG
] = 0x08000;
1163 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_PCM
] = 0x01200;
1164 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_MPG
] = 0x10000;
1165 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_YUV
] = 0x10000;
1166 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_YUV
] = 0x08000;
1168 /* Setup VBI Raw Size. Should be big enough to hold PAL.
1169 It is possible to switch between PAL and NTSC, so we need to
1170 take the largest size here. */
1171 /* 1456 is multiple of 16, real size = 1444 */
1172 itv
->vbi
.raw_size
= 1456;
1173 /* We use a buffer size of 1/2 of the total size needed for a
1174 frame. This is actually very useful, since we now receive
1175 a field at a time and that makes 'compressing' the raw data
1176 down to size by stripping off the SAV codes a lot easier.
1177 Note: having two different buffer sizes prevents standard
1178 switching on the fly. We need to find a better solution... */
1179 vbi_buf_size
= itv
->vbi
.raw_size
* (itv
->is_60hz
? 24 : 36) / 2;
1180 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_VBI
] = vbi_buf_size
;
1181 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_VBI
] = sizeof(struct v4l2_sliced_vbi_data
) * 36;
1183 if (itv
->options
.radio
> 0)
1184 itv
->v4l2_cap
|= V4L2_CAP_RADIO
;
1186 if (itv
->options
.tuner
> -1) {
1187 struct tuner_setup setup
;
1189 setup
.addr
= ADDR_UNSET
;
1190 setup
.type
= itv
->options
.tuner
;
1191 setup
.mode_mask
= T_ANALOG_TV
; /* matches TV tuners */
1192 if (itv
->options
.radio
> 0)
1193 setup
.mode_mask
|= T_RADIO
;
1194 setup
.tuner_callback
= (setup
.type
== TUNER_XC2028
) ?
1195 ivtv_reset_tuner_gpio
: NULL
;
1196 ivtv_call_all(itv
, tuner
, s_type_addr
, &setup
);
1197 if (setup
.type
== TUNER_XC2028
) {
1198 static struct xc2028_ctrl ctrl
= {
1199 .fname
= XC2028_DEFAULT_FIRMWARE
,
1202 struct v4l2_priv_tun_config cfg
= {
1203 .tuner
= itv
->options
.tuner
,
1206 ivtv_call_all(itv
, tuner
, s_config
, &cfg
);
1210 /* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
1212 itv
->tuner_std
= itv
->std
;
1214 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
) {
1215 struct v4l2_ctrl_handler
*hdl
= itv
->v4l2_dev
.ctrl_handler
;
1217 itv
->ctrl_pts
= v4l2_ctrl_new_std(hdl
, &ivtv_hdl_out_ops
,
1218 V4L2_CID_MPEG_VIDEO_DEC_PTS
, 0, 0, 0, 0);
1219 itv
->ctrl_frame
= v4l2_ctrl_new_std(hdl
, &ivtv_hdl_out_ops
,
1220 V4L2_CID_MPEG_VIDEO_DEC_FRAME
, 0, 0, 0, 0);
1221 /* Note: V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO is not supported,
1222 mask that menu item. */
1223 itv
->ctrl_audio_playback
=
1224 v4l2_ctrl_new_std_menu(hdl
, &ivtv_hdl_out_ops
,
1225 V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK
,
1226 V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO
,
1227 1 << V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO
,
1228 V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO
);
1229 itv
->ctrl_audio_multilingual_playback
=
1230 v4l2_ctrl_new_std_menu(hdl
, &ivtv_hdl_out_ops
,
1231 V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK
,
1232 V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO
,
1233 1 << V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO
,
1234 V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT
);
1236 retval
= hdl
->error
;
1239 v4l2_ctrl_cluster(2, &itv
->ctrl_pts
);
1240 v4l2_ctrl_cluster(2, &itv
->ctrl_audio_playback
);
1241 ivtv_call_all(itv
, video
, s_std_output
, itv
->std
);
1242 /* Turn off the output signal. The mpeg decoder is not yet
1243 active so without this you would get a green image until the
1244 mpeg decoder becomes active. */
1245 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 0);
1248 /* clear interrupt mask, effectively disabling interrupts */
1249 ivtv_set_irq_mask(itv
, 0xffffffff);
1252 retval
= request_irq(itv
->pdev
->irq
, ivtv_irq_handler
,
1253 IRQF_SHARED
, itv
->v4l2_dev
.name
, (void *)itv
);
1255 IVTV_ERR("Failed to register irq %d\n", retval
);
1259 retval
= ivtv_streams_setup(itv
);
1261 IVTV_ERR("Error %d setting up streams\n", retval
);
1264 retval
= ivtv_streams_register(itv
);
1266 IVTV_ERR("Error %d registering devices\n", retval
);
1269 IVTV_INFO("Initialized card: %s\n", itv
->card_name
);
1271 /* Load ivtv submodules (ivtv-alsa) */
1272 request_modules(itv
);
1276 ivtv_streams_cleanup(itv
);
1278 free_irq(itv
->pdev
->irq
, (void *)itv
);
1280 v4l2_ctrl_handler_free(&itv
->cxhdl
.hdl
);
1285 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
1286 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1287 if (itv
->has_cx23415
)
1288 release_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1290 kthread_stop(itv
->irq_worker_task
);
1294 IVTV_ERR("Error %d on initialization\n", retval
);
1296 v4l2_device_unregister(&itv
->v4l2_dev
);
1301 int ivtv_init_on_first_open(struct ivtv
*itv
)
1303 struct v4l2_frequency vf
;
1304 /* Needed to call ioctls later */
1305 struct ivtv_open_id fh
;
1306 int fw_retry_count
= 3;
1310 fh
.type
= IVTV_ENC_STREAM_TYPE_MPG
;
1312 if (test_bit(IVTV_F_I_FAILED
, &itv
->i_flags
))
1315 if (test_and_set_bit(IVTV_F_I_INITED
, &itv
->i_flags
))
1318 while (--fw_retry_count
> 0) {
1320 if (ivtv_firmware_init(itv
) == 0)
1322 if (fw_retry_count
> 1)
1323 IVTV_WARN("Retry loading firmware\n");
1326 if (fw_retry_count
== 0) {
1327 set_bit(IVTV_F_I_FAILED
, &itv
->i_flags
);
1331 /* Try and get firmware versions */
1332 IVTV_DEBUG_INFO("Getting firmware version..\n");
1333 ivtv_firmware_versions(itv
);
1335 if (itv
->card
->hw_all
& IVTV_HW_CX25840
)
1336 v4l2_subdev_call(itv
->sd_video
, core
, load_fw
);
1339 vf
.type
= V4L2_TUNER_ANALOG_TV
;
1340 vf
.frequency
= 6400; /* the tuner 'baseline' frequency */
1342 /* Set initial frequency. For PAL/SECAM broadcasts no
1343 'default' channel exists AFAIK. */
1344 if (itv
->std
== V4L2_STD_NTSC_M_JP
) {
1345 vf
.frequency
= 1460; /* ch. 1 91250*16/1000 */
1347 else if (itv
->std
& V4L2_STD_NTSC_M
) {
1348 vf
.frequency
= 1076; /* ch. 4 67250*16/1000 */
1351 video_input
= itv
->active_input
;
1352 itv
->active_input
++; /* Force update of input */
1353 ivtv_s_input(NULL
, &fh
, video_input
);
1355 /* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
1357 itv
->std
++; /* Force full standard initialization */
1358 itv
->std_out
= itv
->std
;
1359 ivtv_s_frequency(NULL
, &fh
, &vf
);
1361 if (itv
->card
->v4l2_capabilities
& V4L2_CAP_VIDEO_OUTPUT
) {
1362 /* Turn on the TV-out: ivtv_init_mpeg_decoder() initializes
1363 the mpeg decoder so now the saa7127 receives a proper
1365 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 1);
1366 ivtv_init_mpeg_decoder(itv
);
1369 /* On a cx23416 this seems to be able to enable DMA to the chip? */
1370 if (!itv
->has_cx23415
)
1371 write_reg_sync(0x03, IVTV_REG_DMACONTROL
);
1373 ivtv_s_std_enc(itv
, itv
->tuner_std
);
1375 /* Default interrupts enabled. For the PVR350 this includes the
1376 decoder VSYNC interrupt, which is always on. It is not only used
1377 during decoding but also by the OSD.
1378 Some old PVR250 cards had a cx23415, so testing for that is too
1379 general. Instead test if the card has video output capability. */
1380 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
) {
1381 ivtv_clear_irq_mask(itv
, IVTV_IRQ_MASK_INIT
| IVTV_IRQ_DEC_VSYNC
);
1382 ivtv_set_osd_alpha(itv
);
1383 ivtv_s_std_dec(itv
, itv
->tuner_std
);
1385 ivtv_clear_irq_mask(itv
, IVTV_IRQ_MASK_INIT
);
1388 /* Setup initial controls */
1389 cx2341x_handler_setup(&itv
->cxhdl
);
1393 static void ivtv_remove(struct pci_dev
*pdev
)
1395 struct v4l2_device
*v4l2_dev
= dev_get_drvdata(&pdev
->dev
);
1396 struct ivtv
*itv
= to_ivtv(v4l2_dev
);
1399 IVTV_DEBUG_INFO("Removing card\n");
1401 flush_request_modules(itv
);
1403 if (test_bit(IVTV_F_I_INITED
, &itv
->i_flags
)) {
1404 /* Stop all captures */
1405 IVTV_DEBUG_INFO("Stopping all streams\n");
1406 if (atomic_read(&itv
->capturing
) > 0)
1407 ivtv_stop_all_captures(itv
);
1409 /* Stop all decoding */
1410 IVTV_DEBUG_INFO("Stopping decoding\n");
1412 /* Turn off the TV-out */
1413 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
)
1414 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 0);
1415 if (atomic_read(&itv
->decoding
) > 0) {
1418 if (test_bit(IVTV_F_I_DEC_YUV
, &itv
->i_flags
))
1419 type
= IVTV_DEC_STREAM_TYPE_YUV
;
1421 type
= IVTV_DEC_STREAM_TYPE_MPG
;
1422 ivtv_stop_v4l2_decode_stream(&itv
->streams
[type
],
1423 V4L2_DEC_CMD_STOP_TO_BLACK
| V4L2_DEC_CMD_STOP_IMMEDIATELY
, 0);
1425 ivtv_halt_firmware(itv
);
1429 ivtv_set_irq_mask(itv
, 0xffffffff);
1430 del_timer_sync(&itv
->dma_timer
);
1432 /* Kill irq worker */
1433 kthread_flush_worker(&itv
->irq_worker
);
1434 kthread_stop(itv
->irq_worker_task
);
1436 ivtv_streams_cleanup(itv
);
1437 ivtv_udma_free(itv
);
1439 v4l2_ctrl_handler_free(&itv
->cxhdl
.hdl
);
1443 free_irq(itv
->pdev
->irq
, (void *)itv
);
1446 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
1447 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1448 if (itv
->has_cx23415
)
1449 release_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1451 pci_disable_device(itv
->pdev
);
1452 for (i
= 0; i
< IVTV_VBI_FRAMES
; i
++)
1453 kfree(itv
->vbi
.sliced_mpeg_data
[i
]);
1455 printk(KERN_INFO
"ivtv: Removed %s\n", itv
->card_name
);
1457 v4l2_device_unregister(&itv
->v4l2_dev
);
1461 /* define a pci_driver for card detection */
1462 static struct pci_driver ivtv_pci_driver
= {
1464 .id_table
= ivtv_pci_tbl
,
1465 .probe
= ivtv_probe
,
1466 .remove
= ivtv_remove
,
1469 static int __init
module_start(void)
1471 printk(KERN_INFO
"ivtv: Start initialization, version %s\n", IVTV_VERSION
);
1473 /* Validate parameters */
1474 if (ivtv_first_minor
< 0 || ivtv_first_minor
>= IVTV_MAX_CARDS
) {
1475 printk(KERN_ERR
"ivtv: Exiting, ivtv_first_minor must be between 0 and %d\n",
1476 IVTV_MAX_CARDS
- 1);
1480 if (ivtv_debug
< 0 || ivtv_debug
> 2047) {
1482 printk(KERN_INFO
"ivtv: Debug value must be >= 0 and <= 2047\n");
1485 if (pci_register_driver(&ivtv_pci_driver
)) {
1486 printk(KERN_ERR
"ivtv: Error detecting PCI card\n");
1489 printk(KERN_INFO
"ivtv: End initialization\n");
1493 static void __exit
module_cleanup(void)
1495 pci_unregister_driver(&ivtv_pci_driver
);
1498 /* Note: These symbols are exported because they are used by the ivtvfb
1499 framebuffer module and an infrared module for the IR-blaster. */
1500 EXPORT_SYMBOL(ivtv_set_irq_mask
);
1501 EXPORT_SYMBOL(ivtv_api
);
1502 EXPORT_SYMBOL(ivtv_vapi
);
1503 EXPORT_SYMBOL(ivtv_vapi_result
);
1504 EXPORT_SYMBOL(ivtv_clear_irq_mask
);
1505 EXPORT_SYMBOL(ivtv_debug
);
1506 #ifdef CONFIG_VIDEO_ADV_DEBUG
1507 EXPORT_SYMBOL(ivtv_fw_debug
);
1509 EXPORT_SYMBOL(ivtv_reset_ir_gpio
);
1510 EXPORT_SYMBOL(ivtv_udma_setup
);
1511 EXPORT_SYMBOL(ivtv_udma_unmap
);
1512 EXPORT_SYMBOL(ivtv_udma_alloc
);
1513 EXPORT_SYMBOL(ivtv_udma_prepare
);
1514 EXPORT_SYMBOL(ivtv_init_on_first_open
);
1515 EXPORT_SYMBOL(ivtv_firmware_check
);
1517 module_init(module_start
);
1518 module_exit(module_cleanup
);