sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / media / usb / cx231xx / cx231xx-dvb.c
blob2868546999caff703a4a1c2a5ebc7a7af339f24e
1 /*
2 DVB device driver for cx231xx
4 Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
5 Based on em28xx driver
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 #include "cx231xx.h"
23 #include <linux/kernel.h>
24 #include <linux/slab.h>
26 #include <media/v4l2-common.h>
27 #include <media/videobuf-vmalloc.h>
28 #include <media/tuner.h>
30 #include "xc5000.h"
31 #include "s5h1432.h"
32 #include "tda18271.h"
33 #include "s5h1411.h"
34 #include "lgdt3305.h"
35 #include "si2165.h"
36 #include "mb86a20s.h"
37 #include "si2157.h"
38 #include "lgdt3306a.h"
40 MODULE_DESCRIPTION("driver for cx231xx based DVB cards");
41 MODULE_AUTHOR("Srinivasa Deevi <srinivasa.deevi@conexant.com>");
42 MODULE_LICENSE("GPL");
44 static unsigned int debug;
45 module_param(debug, int, 0644);
46 MODULE_PARM_DESC(debug, "enable debug messages [dvb]");
48 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
50 #define CX231XX_DVB_NUM_BUFS 5
51 #define CX231XX_DVB_MAX_PACKETSIZE 564
52 #define CX231XX_DVB_MAX_PACKETS 64
54 struct cx231xx_dvb {
55 struct dvb_frontend *frontend;
57 /* feed count management */
58 struct mutex lock;
59 int nfeeds;
61 /* general boilerplate stuff */
62 struct dvb_adapter adapter;
63 struct dvb_demux demux;
64 struct dmxdev dmxdev;
65 struct dmx_frontend fe_hw;
66 struct dmx_frontend fe_mem;
67 struct dvb_net net;
68 struct i2c_client *i2c_client_demod;
69 struct i2c_client *i2c_client_tuner;
72 static struct s5h1432_config dvico_s5h1432_config = {
73 .output_mode = S5H1432_SERIAL_OUTPUT,
74 .gpio = S5H1432_GPIO_ON,
75 .qam_if = S5H1432_IF_4000,
76 .vsb_if = S5H1432_IF_4000,
77 .inversion = S5H1432_INVERSION_OFF,
78 .status_mode = S5H1432_DEMODLOCKING,
79 .mpeg_timing = S5H1432_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
82 static struct tda18271_std_map cnxt_rde253s_tda18271_std_map = {
83 .dvbt_6 = { .if_freq = 4000, .agc_mode = 3, .std = 4,
84 .if_lvl = 1, .rfagc_top = 0x37, },
85 .dvbt_7 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
86 .if_lvl = 1, .rfagc_top = 0x37, },
87 .dvbt_8 = { .if_freq = 4000, .agc_mode = 3, .std = 6,
88 .if_lvl = 1, .rfagc_top = 0x37, },
91 static struct tda18271_std_map mb86a20s_tda18271_config = {
92 .dvbt_6 = { .if_freq = 4000, .agc_mode = 3, .std = 4,
93 .if_lvl = 0, .rfagc_top = 0x37, },
96 static struct tda18271_config cnxt_rde253s_tunerconfig = {
97 .std_map = &cnxt_rde253s_tda18271_std_map,
98 .gate = TDA18271_GATE_ANALOG,
101 static struct s5h1411_config tda18271_s5h1411_config = {
102 .output_mode = S5H1411_SERIAL_OUTPUT,
103 .gpio = S5H1411_GPIO_OFF,
104 .vsb_if = S5H1411_IF_3250,
105 .qam_if = S5H1411_IF_4000,
106 .inversion = S5H1411_INVERSION_ON,
107 .status_mode = S5H1411_DEMODLOCKING,
108 .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
110 static struct s5h1411_config xc5000_s5h1411_config = {
111 .output_mode = S5H1411_SERIAL_OUTPUT,
112 .gpio = S5H1411_GPIO_OFF,
113 .vsb_if = S5H1411_IF_3250,
114 .qam_if = S5H1411_IF_3250,
115 .inversion = S5H1411_INVERSION_OFF,
116 .status_mode = S5H1411_DEMODLOCKING,
117 .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
120 static struct lgdt3305_config hcw_lgdt3305_config = {
121 .i2c_addr = 0x0e,
122 .mpeg_mode = LGDT3305_MPEG_SERIAL,
123 .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
124 .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
125 .deny_i2c_rptr = 1,
126 .spectral_inversion = 1,
127 .qam_if_khz = 4000,
128 .vsb_if_khz = 3250,
131 static struct tda18271_std_map hauppauge_tda18271_std_map = {
132 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
133 .if_lvl = 1, .rfagc_top = 0x58, },
134 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
135 .if_lvl = 1, .rfagc_top = 0x58, },
138 static struct tda18271_config hcw_tda18271_config = {
139 .std_map = &hauppauge_tda18271_std_map,
140 .gate = TDA18271_GATE_DIGITAL,
143 static const struct mb86a20s_config pv_mb86a20s_config = {
144 .demod_address = 0x10,
145 .is_serial = true,
148 static struct tda18271_config pv_tda18271_config = {
149 .std_map = &mb86a20s_tda18271_config,
150 .gate = TDA18271_GATE_DIGITAL,
151 .small_i2c = TDA18271_03_BYTE_CHUNK_INIT,
154 static struct lgdt3306a_config hauppauge_955q_lgdt3306a_config = {
155 .i2c_addr = 0x59,
156 .qam_if_khz = 4000,
157 .vsb_if_khz = 3250,
158 .deny_i2c_rptr = 1,
159 .spectral_inversion = 1,
160 .mpeg_mode = LGDT3306A_MPEG_SERIAL,
161 .tpclk_edge = LGDT3306A_TPCLK_RISING_EDGE,
162 .tpvalid_polarity = LGDT3306A_TP_VALID_HIGH,
163 .xtalMHz = 25,
166 static inline void print_err_status(struct cx231xx *dev, int packet, int status)
168 char *errmsg = "Unknown";
170 switch (status) {
171 case -ENOENT:
172 errmsg = "unlinked synchronuously";
173 break;
174 case -ECONNRESET:
175 errmsg = "unlinked asynchronuously";
176 break;
177 case -ENOSR:
178 errmsg = "Buffer error (overrun)";
179 break;
180 case -EPIPE:
181 errmsg = "Stalled (device not responding)";
182 break;
183 case -EOVERFLOW:
184 errmsg = "Babble (bad cable?)";
185 break;
186 case -EPROTO:
187 errmsg = "Bit-stuff error (bad cable?)";
188 break;
189 case -EILSEQ:
190 errmsg = "CRC/Timeout (could be anything)";
191 break;
192 case -ETIME:
193 errmsg = "Device does not respond";
194 break;
196 if (packet < 0) {
197 dev_dbg(dev->dev,
198 "URB status %d [%s].\n", status, errmsg);
199 } else {
200 dev_dbg(dev->dev,
201 "URB packet %d, status %d [%s].\n",
202 packet, status, errmsg);
206 static inline int dvb_isoc_copy(struct cx231xx *dev, struct urb *urb)
208 int i;
210 if (!dev)
211 return 0;
213 if (dev->state & DEV_DISCONNECTED)
214 return 0;
216 if (urb->status < 0) {
217 print_err_status(dev, -1, urb->status);
218 if (urb->status == -ENOENT)
219 return 0;
222 for (i = 0; i < urb->number_of_packets; i++) {
223 int status = urb->iso_frame_desc[i].status;
225 if (status < 0) {
226 print_err_status(dev, i, status);
227 if (urb->iso_frame_desc[i].status != -EPROTO)
228 continue;
231 dvb_dmx_swfilter(&dev->dvb->demux,
232 urb->transfer_buffer +
233 urb->iso_frame_desc[i].offset,
234 urb->iso_frame_desc[i].actual_length);
237 return 0;
240 static inline int dvb_bulk_copy(struct cx231xx *dev, struct urb *urb)
242 if (!dev)
243 return 0;
245 if (dev->state & DEV_DISCONNECTED)
246 return 0;
248 if (urb->status < 0) {
249 print_err_status(dev, -1, urb->status);
250 if (urb->status == -ENOENT)
251 return 0;
254 /* Feed the transport payload into the kernel demux */
255 dvb_dmx_swfilter(&dev->dvb->demux,
256 urb->transfer_buffer, urb->actual_length);
258 return 0;
261 static int start_streaming(struct cx231xx_dvb *dvb)
263 int rc;
264 struct cx231xx *dev = dvb->adapter.priv;
266 if (dev->USE_ISO) {
267 dev_dbg(dev->dev, "DVB transfer mode is ISO.\n");
268 cx231xx_set_alt_setting(dev, INDEX_TS1, 4);
269 rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
270 if (rc < 0)
271 return rc;
272 dev->mode_tv = 1;
273 return cx231xx_init_isoc(dev, CX231XX_DVB_MAX_PACKETS,
274 CX231XX_DVB_NUM_BUFS,
275 dev->ts1_mode.max_pkt_size,
276 dvb_isoc_copy);
277 } else {
278 dev_dbg(dev->dev, "DVB transfer mode is BULK.\n");
279 cx231xx_set_alt_setting(dev, INDEX_TS1, 0);
280 rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
281 if (rc < 0)
282 return rc;
283 dev->mode_tv = 1;
284 return cx231xx_init_bulk(dev, CX231XX_DVB_MAX_PACKETS,
285 CX231XX_DVB_NUM_BUFS,
286 dev->ts1_mode.max_pkt_size,
287 dvb_bulk_copy);
292 static int stop_streaming(struct cx231xx_dvb *dvb)
294 struct cx231xx *dev = dvb->adapter.priv;
296 if (dev->USE_ISO)
297 cx231xx_uninit_isoc(dev);
298 else
299 cx231xx_uninit_bulk(dev);
301 cx231xx_set_mode(dev, CX231XX_SUSPEND);
303 return 0;
306 static int start_feed(struct dvb_demux_feed *feed)
308 struct dvb_demux *demux = feed->demux;
309 struct cx231xx_dvb *dvb = demux->priv;
310 int rc, ret;
312 if (!demux->dmx.frontend)
313 return -EINVAL;
315 mutex_lock(&dvb->lock);
316 dvb->nfeeds++;
317 rc = dvb->nfeeds;
319 if (dvb->nfeeds == 1) {
320 ret = start_streaming(dvb);
321 if (ret < 0)
322 rc = ret;
325 mutex_unlock(&dvb->lock);
326 return rc;
329 static int stop_feed(struct dvb_demux_feed *feed)
331 struct dvb_demux *demux = feed->demux;
332 struct cx231xx_dvb *dvb = demux->priv;
333 int err = 0;
335 mutex_lock(&dvb->lock);
336 dvb->nfeeds--;
338 if (0 == dvb->nfeeds)
339 err = stop_streaming(dvb);
341 mutex_unlock(&dvb->lock);
342 return err;
345 /* ------------------------------------------------------------------ */
346 static int cx231xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire)
348 struct cx231xx *dev = fe->dvb->priv;
350 if (acquire)
351 return cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
352 else
353 return cx231xx_set_mode(dev, CX231XX_SUSPEND);
356 /* ------------------------------------------------------------------ */
358 static struct xc5000_config cnxt_rde250_tunerconfig = {
359 .i2c_address = 0x61,
360 .if_khz = 4000,
362 static struct xc5000_config cnxt_rdu250_tunerconfig = {
363 .i2c_address = 0x61,
364 .if_khz = 3250,
367 /* ------------------------------------------------------------------ */
368 #if 0
369 static int attach_xc5000(u8 addr, struct cx231xx *dev)
372 struct dvb_frontend *fe;
373 struct xc5000_config cfg;
375 memset(&cfg, 0, sizeof(cfg));
376 cfg.i2c_adap = cx231xx_get_i2c_adap(dev, dev->board.tuner_i2c_master);
377 cfg.i2c_addr = addr;
379 if (!dev->dvb->frontend) {
380 dev_err(dev->dev, "%s/2: dvb frontend not attached. Can't attach xc5000\n",
381 dev->name);
382 return -EINVAL;
385 fe = dvb_attach(xc5000_attach, dev->dvb->frontend, &cfg);
386 if (!fe) {
387 dev_err(dev->dev, "%s/2: xc5000 attach failed\n", dev->name);
388 dvb_frontend_detach(dev->dvb->frontend);
389 dev->dvb->frontend = NULL;
390 return -EINVAL;
393 dev_info(dev->dev, "%s/2: xc5000 attached\n", dev->name);
395 return 0;
397 #endif
399 int cx231xx_set_analog_freq(struct cx231xx *dev, u32 freq)
401 if ((dev->dvb != NULL) && (dev->dvb->frontend != NULL)) {
403 struct dvb_tuner_ops *dops = &dev->dvb->frontend->ops.tuner_ops;
405 if (dops->set_analog_params != NULL) {
406 struct analog_parameters params;
408 params.frequency = freq;
409 params.std = dev->norm;
410 params.mode = 0; /* 0- Air; 1 - cable */
411 /*params.audmode = ; */
413 /* Set the analog parameters to set the frequency */
414 dops->set_analog_params(dev->dvb->frontend, &params);
419 return 0;
422 int cx231xx_reset_analog_tuner(struct cx231xx *dev)
424 int status = 0;
426 if ((dev->dvb != NULL) && (dev->dvb->frontend != NULL)) {
428 struct dvb_tuner_ops *dops = &dev->dvb->frontend->ops.tuner_ops;
430 if (dops->init != NULL && !dev->xc_fw_load_done) {
432 dev_dbg(dev->dev,
433 "Reloading firmware for XC5000\n");
434 status = dops->init(dev->dvb->frontend);
435 if (status == 0) {
436 dev->xc_fw_load_done = 1;
437 dev_dbg(dev->dev,
438 "XC5000 firmware download completed\n");
439 } else {
440 dev->xc_fw_load_done = 0;
441 dev_dbg(dev->dev,
442 "XC5000 firmware download failed !!!\n");
448 return status;
451 /* ------------------------------------------------------------------ */
453 static int register_dvb(struct cx231xx_dvb *dvb,
454 struct module *module,
455 struct cx231xx *dev, struct device *device)
457 int result;
459 mutex_init(&dvb->lock);
462 /* register adapter */
463 result = dvb_register_adapter(&dvb->adapter, dev->name, module, device,
464 adapter_nr);
465 if (result < 0) {
466 dev_warn(dev->dev,
467 "%s: dvb_register_adapter failed (errno = %d)\n",
468 dev->name, result);
469 goto fail_adapter;
471 dvb_register_media_controller(&dvb->adapter, dev->media_dev);
473 /* Ensure all frontends negotiate bus access */
474 dvb->frontend->ops.ts_bus_ctrl = cx231xx_dvb_bus_ctrl;
476 dvb->adapter.priv = dev;
478 /* register frontend */
479 result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
480 if (result < 0) {
481 dev_warn(dev->dev,
482 "%s: dvb_register_frontend failed (errno = %d)\n",
483 dev->name, result);
484 goto fail_frontend;
487 /* register demux stuff */
488 dvb->demux.dmx.capabilities =
489 DMX_TS_FILTERING | DMX_SECTION_FILTERING |
490 DMX_MEMORY_BASED_FILTERING;
491 dvb->demux.priv = dvb;
492 dvb->demux.filternum = 256;
493 dvb->demux.feednum = 256;
494 dvb->demux.start_feed = start_feed;
495 dvb->demux.stop_feed = stop_feed;
497 result = dvb_dmx_init(&dvb->demux);
498 if (result < 0) {
499 dev_warn(dev->dev,
500 "%s: dvb_dmx_init failed (errno = %d)\n",
501 dev->name, result);
502 goto fail_dmx;
505 dvb->dmxdev.filternum = 256;
506 dvb->dmxdev.demux = &dvb->demux.dmx;
507 dvb->dmxdev.capabilities = 0;
508 result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
509 if (result < 0) {
510 dev_warn(dev->dev,
511 "%s: dvb_dmxdev_init failed (errno = %d)\n",
512 dev->name, result);
513 goto fail_dmxdev;
516 dvb->fe_hw.source = DMX_FRONTEND_0;
517 result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
518 if (result < 0) {
519 dev_warn(dev->dev,
520 "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
521 dev->name, result);
522 goto fail_fe_hw;
525 dvb->fe_mem.source = DMX_MEMORY_FE;
526 result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
527 if (result < 0) {
528 dev_warn(dev->dev,
529 "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
530 dev->name, result);
531 goto fail_fe_mem;
534 result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
535 if (result < 0) {
536 dev_warn(dev->dev,
537 "%s: connect_frontend failed (errno = %d)\n",
538 dev->name, result);
539 goto fail_fe_conn;
542 /* register network adapter */
543 dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
544 result = dvb_create_media_graph(&dvb->adapter,
545 dev->tuner_type == TUNER_ABSENT);
546 if (result < 0)
547 goto fail_create_graph;
549 return 0;
551 fail_create_graph:
552 dvb_net_release(&dvb->net);
553 fail_fe_conn:
554 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
555 fail_fe_mem:
556 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
557 fail_fe_hw:
558 dvb_dmxdev_release(&dvb->dmxdev);
559 fail_dmxdev:
560 dvb_dmx_release(&dvb->demux);
561 fail_dmx:
562 dvb_unregister_frontend(dvb->frontend);
563 fail_frontend:
564 dvb_frontend_detach(dvb->frontend);
565 dvb_unregister_adapter(&dvb->adapter);
566 fail_adapter:
567 return result;
570 static void unregister_dvb(struct cx231xx_dvb *dvb)
572 struct i2c_client *client;
573 dvb_net_release(&dvb->net);
574 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
575 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
576 dvb_dmxdev_release(&dvb->dmxdev);
577 dvb_dmx_release(&dvb->demux);
578 /* remove I2C tuner */
579 client = dvb->i2c_client_tuner;
580 if (client) {
581 module_put(client->dev.driver->owner);
582 i2c_unregister_device(client);
584 /* remove I2C demod */
585 client = dvb->i2c_client_demod;
586 if (client) {
587 module_put(client->dev.driver->owner);
588 i2c_unregister_device(client);
590 dvb_unregister_frontend(dvb->frontend);
591 dvb_frontend_detach(dvb->frontend);
592 dvb_unregister_adapter(&dvb->adapter);
595 static int dvb_init(struct cx231xx *dev)
597 int result = 0;
598 struct cx231xx_dvb *dvb;
599 struct i2c_adapter *tuner_i2c;
600 struct i2c_adapter *demod_i2c;
602 if (!dev->board.has_dvb) {
603 /* This device does not support the extension */
604 return 0;
607 dvb = kzalloc(sizeof(struct cx231xx_dvb), GFP_KERNEL);
609 if (dvb == NULL) {
610 dev_info(dev->dev,
611 "cx231xx_dvb: memory allocation failed\n");
612 return -ENOMEM;
614 dev->dvb = dvb;
615 dev->cx231xx_set_analog_freq = cx231xx_set_analog_freq;
616 dev->cx231xx_reset_analog_tuner = cx231xx_reset_analog_tuner;
618 tuner_i2c = cx231xx_get_i2c_adap(dev, dev->board.tuner_i2c_master);
619 demod_i2c = cx231xx_get_i2c_adap(dev, dev->board.demod_i2c_master);
620 mutex_lock(&dev->lock);
621 cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
622 cx231xx_demod_reset(dev);
623 /* init frontend */
624 switch (dev->model) {
625 case CX231XX_BOARD_CNXT_CARRAERA:
626 case CX231XX_BOARD_CNXT_RDE_250:
628 dev->dvb->frontend = dvb_attach(s5h1432_attach,
629 &dvico_s5h1432_config,
630 demod_i2c);
632 if (dev->dvb->frontend == NULL) {
633 dev_err(dev->dev,
634 "Failed to attach s5h1432 front end\n");
635 result = -EINVAL;
636 goto out_free;
639 /* define general-purpose callback pointer */
640 dvb->frontend->callback = cx231xx_tuner_callback;
642 if (!dvb_attach(xc5000_attach, dev->dvb->frontend,
643 tuner_i2c,
644 &cnxt_rde250_tunerconfig)) {
645 result = -EINVAL;
646 goto out_free;
649 break;
650 case CX231XX_BOARD_CNXT_SHELBY:
651 case CX231XX_BOARD_CNXT_RDU_250:
653 dev->dvb->frontend = dvb_attach(s5h1411_attach,
654 &xc5000_s5h1411_config,
655 demod_i2c);
657 if (dev->dvb->frontend == NULL) {
658 dev_err(dev->dev,
659 "Failed to attach s5h1411 front end\n");
660 result = -EINVAL;
661 goto out_free;
664 /* define general-purpose callback pointer */
665 dvb->frontend->callback = cx231xx_tuner_callback;
667 if (!dvb_attach(xc5000_attach, dev->dvb->frontend,
668 tuner_i2c,
669 &cnxt_rdu250_tunerconfig)) {
670 result = -EINVAL;
671 goto out_free;
673 break;
674 case CX231XX_BOARD_CNXT_RDE_253S:
676 dev->dvb->frontend = dvb_attach(s5h1432_attach,
677 &dvico_s5h1432_config,
678 demod_i2c);
680 if (dev->dvb->frontend == NULL) {
681 dev_err(dev->dev,
682 "Failed to attach s5h1432 front end\n");
683 result = -EINVAL;
684 goto out_free;
687 /* define general-purpose callback pointer */
688 dvb->frontend->callback = cx231xx_tuner_callback;
690 if (!dvb_attach(tda18271_attach, dev->dvb->frontend,
691 0x60, tuner_i2c,
692 &cnxt_rde253s_tunerconfig)) {
693 result = -EINVAL;
694 goto out_free;
696 break;
697 case CX231XX_BOARD_CNXT_RDU_253S:
698 case CX231XX_BOARD_KWORLD_UB445_USB_HYBRID:
700 dev->dvb->frontend = dvb_attach(s5h1411_attach,
701 &tda18271_s5h1411_config,
702 demod_i2c);
704 if (dev->dvb->frontend == NULL) {
705 dev_err(dev->dev,
706 "Failed to attach s5h1411 front end\n");
707 result = -EINVAL;
708 goto out_free;
711 /* define general-purpose callback pointer */
712 dvb->frontend->callback = cx231xx_tuner_callback;
714 if (!dvb_attach(tda18271_attach, dev->dvb->frontend,
715 0x60, tuner_i2c,
716 &cnxt_rde253s_tunerconfig)) {
717 result = -EINVAL;
718 goto out_free;
720 break;
721 case CX231XX_BOARD_HAUPPAUGE_EXETER:
723 dev_info(dev->dev,
724 "%s: looking for tuner / demod on i2c bus: %d\n",
725 __func__, i2c_adapter_id(tuner_i2c));
727 dev->dvb->frontend = dvb_attach(lgdt3305_attach,
728 &hcw_lgdt3305_config,
729 demod_i2c);
731 if (dev->dvb->frontend == NULL) {
732 dev_err(dev->dev,
733 "Failed to attach LG3305 front end\n");
734 result = -EINVAL;
735 goto out_free;
738 /* define general-purpose callback pointer */
739 dvb->frontend->callback = cx231xx_tuner_callback;
741 dvb_attach(tda18271_attach, dev->dvb->frontend,
742 0x60, tuner_i2c,
743 &hcw_tda18271_config);
744 break;
746 case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx:
748 struct i2c_client *client;
749 struct i2c_board_info info;
750 struct si2165_platform_data si2165_pdata;
752 /* attach demod */
753 memset(&si2165_pdata, 0, sizeof(si2165_pdata));
754 si2165_pdata.fe = &dev->dvb->frontend;
755 si2165_pdata.chip_mode = SI2165_MODE_PLL_XTAL,
756 si2165_pdata.ref_freq_Hz = 16000000,
758 memset(&info, 0, sizeof(struct i2c_board_info));
759 strlcpy(info.type, "si2165", I2C_NAME_SIZE);
760 info.addr = 0x64;
761 info.platform_data = &si2165_pdata;
762 request_module(info.type);
763 client = i2c_new_device(demod_i2c, &info);
764 if (client == NULL || client->dev.driver == NULL || dev->dvb->frontend == NULL) {
765 dev_err(dev->dev,
766 "Failed to attach SI2165 front end\n");
767 result = -EINVAL;
768 goto out_free;
771 if (!try_module_get(client->dev.driver->owner)) {
772 i2c_unregister_device(client);
773 result = -ENODEV;
774 goto out_free;
777 dvb->i2c_client_demod = client;
779 dev->dvb->frontend->ops.i2c_gate_ctrl = NULL;
781 /* define general-purpose callback pointer */
782 dvb->frontend->callback = cx231xx_tuner_callback;
784 dvb_attach(tda18271_attach, dev->dvb->frontend,
785 0x60,
786 tuner_i2c,
787 &hcw_tda18271_config);
789 dev->cx231xx_reset_analog_tuner = NULL;
790 break;
792 case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
794 struct i2c_client *client;
795 struct i2c_board_info info;
796 struct si2165_platform_data si2165_pdata;
797 struct si2157_config si2157_config;
799 /* attach demod */
800 memset(&si2165_pdata, 0, sizeof(si2165_pdata));
801 si2165_pdata.fe = &dev->dvb->frontend;
802 si2165_pdata.chip_mode = SI2165_MODE_PLL_EXT,
803 si2165_pdata.ref_freq_Hz = 24000000,
805 memset(&info, 0, sizeof(struct i2c_board_info));
806 strlcpy(info.type, "si2165", I2C_NAME_SIZE);
807 info.addr = 0x64;
808 info.platform_data = &si2165_pdata;
809 request_module(info.type);
810 client = i2c_new_device(demod_i2c, &info);
811 if (client == NULL || client->dev.driver == NULL || dev->dvb->frontend == NULL) {
812 dev_err(dev->dev,
813 "Failed to attach SI2165 front end\n");
814 result = -EINVAL;
815 goto out_free;
818 if (!try_module_get(client->dev.driver->owner)) {
819 i2c_unregister_device(client);
820 result = -ENODEV;
821 goto out_free;
824 dvb->i2c_client_demod = client;
826 memset(&info, 0, sizeof(struct i2c_board_info));
828 dev->dvb->frontend->ops.i2c_gate_ctrl = NULL;
830 /* define general-purpose callback pointer */
831 dvb->frontend->callback = cx231xx_tuner_callback;
833 /* attach tuner */
834 memset(&si2157_config, 0, sizeof(si2157_config));
835 si2157_config.fe = dev->dvb->frontend;
836 #ifdef CONFIG_MEDIA_CONTROLLER_DVB
837 si2157_config.mdev = dev->media_dev;
838 #endif
839 si2157_config.if_port = 1;
840 si2157_config.inversion = true;
841 strlcpy(info.type, "si2157", I2C_NAME_SIZE);
842 info.addr = 0x60;
843 info.platform_data = &si2157_config;
844 request_module("si2157");
846 client = i2c_new_device(
847 tuner_i2c,
848 &info);
849 if (client == NULL || client->dev.driver == NULL) {
850 dvb_frontend_detach(dev->dvb->frontend);
851 result = -ENODEV;
852 goto out_free;
855 if (!try_module_get(client->dev.driver->owner)) {
856 i2c_unregister_device(client);
857 dvb_frontend_detach(dev->dvb->frontend);
858 result = -ENODEV;
859 goto out_free;
862 dev->cx231xx_reset_analog_tuner = NULL;
864 dev->dvb->i2c_client_tuner = client;
865 break;
867 case CX231XX_BOARD_HAUPPAUGE_955Q:
869 struct i2c_client *client;
870 struct i2c_board_info info;
871 struct si2157_config si2157_config;
873 memset(&info, 0, sizeof(struct i2c_board_info));
875 dev->dvb->frontend = dvb_attach(lgdt3306a_attach,
876 &hauppauge_955q_lgdt3306a_config,
877 demod_i2c
880 if (dev->dvb->frontend == NULL) {
881 dev_err(dev->dev,
882 "Failed to attach LGDT3306A frontend.\n");
883 result = -EINVAL;
884 goto out_free;
887 dev->dvb->frontend->ops.i2c_gate_ctrl = NULL;
889 /* define general-purpose callback pointer */
890 dvb->frontend->callback = cx231xx_tuner_callback;
892 /* attach tuner */
893 memset(&si2157_config, 0, sizeof(si2157_config));
894 si2157_config.fe = dev->dvb->frontend;
895 #ifdef CONFIG_MEDIA_CONTROLLER_DVB
896 si2157_config.mdev = dev->media_dev;
897 #endif
898 si2157_config.if_port = 1;
899 si2157_config.inversion = true;
900 strlcpy(info.type, "si2157", I2C_NAME_SIZE);
901 info.addr = 0x60;
902 info.platform_data = &si2157_config;
903 request_module("si2157");
905 client = i2c_new_device(
906 tuner_i2c,
907 &info);
908 if (client == NULL || client->dev.driver == NULL) {
909 dvb_frontend_detach(dev->dvb->frontend);
910 result = -ENODEV;
911 goto out_free;
914 if (!try_module_get(client->dev.driver->owner)) {
915 i2c_unregister_device(client);
916 dvb_frontend_detach(dev->dvb->frontend);
917 result = -ENODEV;
918 goto out_free;
921 dev->cx231xx_reset_analog_tuner = NULL;
923 dev->dvb->i2c_client_tuner = client;
924 break;
926 case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
927 case CX231XX_BOARD_KWORLD_UB430_USB_HYBRID:
929 dev_info(dev->dev,
930 "%s: looking for demod on i2c bus: %d\n",
931 __func__, i2c_adapter_id(tuner_i2c));
933 dev->dvb->frontend = dvb_attach(mb86a20s_attach,
934 &pv_mb86a20s_config,
935 demod_i2c);
937 if (dev->dvb->frontend == NULL) {
938 dev_err(dev->dev,
939 "Failed to attach mb86a20s demod\n");
940 result = -EINVAL;
941 goto out_free;
944 /* define general-purpose callback pointer */
945 dvb->frontend->callback = cx231xx_tuner_callback;
947 dvb_attach(tda18271_attach, dev->dvb->frontend,
948 0x60, tuner_i2c,
949 &pv_tda18271_config);
950 break;
952 default:
953 dev_err(dev->dev,
954 "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
955 dev->name);
956 break;
958 if (NULL == dvb->frontend) {
959 dev_err(dev->dev,
960 "%s/2: frontend initialization failed\n", dev->name);
961 result = -EINVAL;
962 goto out_free;
965 /* register everything */
966 result = register_dvb(dvb, THIS_MODULE, dev, dev->dev);
968 if (result < 0)
969 goto out_free;
972 dev_info(dev->dev, "Successfully loaded cx231xx-dvb\n");
974 ret:
975 cx231xx_set_mode(dev, CX231XX_SUSPEND);
976 mutex_unlock(&dev->lock);
977 return result;
979 out_free:
980 kfree(dvb);
981 dev->dvb = NULL;
982 goto ret;
985 static int dvb_fini(struct cx231xx *dev)
987 if (!dev->board.has_dvb) {
988 /* This device does not support the extension */
989 return 0;
992 if (dev->dvb) {
993 unregister_dvb(dev->dvb);
994 dev->dvb = NULL;
997 return 0;
1000 static struct cx231xx_ops dvb_ops = {
1001 .id = CX231XX_DVB,
1002 .name = "Cx231xx dvb Extension",
1003 .init = dvb_init,
1004 .fini = dvb_fini,
1007 static int __init cx231xx_dvb_register(void)
1009 return cx231xx_register_extension(&dvb_ops);
1012 static void __exit cx231xx_dvb_unregister(void)
1014 cx231xx_unregister_extension(&dvb_ops);
1017 module_init(cx231xx_dvb_register);
1018 module_exit(cx231xx_dvb_unregister);