sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / mfd / lp8788.c
blobacf616559512e3de368eec7707a2ef82f7a989d8
1 /*
2 * TI LP8788 MFD - core interface
4 * Copyright 2012 Texas Instruments
6 * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
14 #include <linux/err.h>
15 #include <linux/i2c.h>
16 #include <linux/mfd/core.h>
17 #include <linux/mfd/lp8788.h>
18 #include <linux/module.h>
19 #include <linux/slab.h>
21 #define MAX_LP8788_REGISTERS 0xA2
23 #define MFD_DEV_SIMPLE(_name) \
24 { \
25 .name = LP8788_DEV_##_name, \
28 #define MFD_DEV_WITH_ID(_name, _id) \
29 { \
30 .name = LP8788_DEV_##_name, \
31 .id = _id, \
34 #define MFD_DEV_WITH_RESOURCE(_name, _resource, num_resource) \
35 { \
36 .name = LP8788_DEV_##_name, \
37 .resources = _resource, \
38 .num_resources = num_resource, \
41 static struct resource chg_irqs[] = {
42 /* Charger Interrupts */
44 .start = LP8788_INT_CHG_INPUT_STATE,
45 .end = LP8788_INT_PRECHG_TIMEOUT,
46 .name = LP8788_CHG_IRQ,
47 .flags = IORESOURCE_IRQ,
49 /* Power Routing Switch Interrupts */
51 .start = LP8788_INT_ENTER_SYS_SUPPORT,
52 .end = LP8788_INT_EXIT_SYS_SUPPORT,
53 .name = LP8788_PRSW_IRQ,
54 .flags = IORESOURCE_IRQ,
56 /* Battery Interrupts */
58 .start = LP8788_INT_BATT_LOW,
59 .end = LP8788_INT_NO_BATT,
60 .name = LP8788_BATT_IRQ,
61 .flags = IORESOURCE_IRQ,
65 static struct resource rtc_irqs[] = {
67 .start = LP8788_INT_RTC_ALARM1,
68 .end = LP8788_INT_RTC_ALARM2,
69 .name = LP8788_ALM_IRQ,
70 .flags = IORESOURCE_IRQ,
74 static const struct mfd_cell lp8788_devs[] = {
75 /* 4 bucks */
76 MFD_DEV_WITH_ID(BUCK, 1),
77 MFD_DEV_WITH_ID(BUCK, 2),
78 MFD_DEV_WITH_ID(BUCK, 3),
79 MFD_DEV_WITH_ID(BUCK, 4),
81 /* 12 digital ldos */
82 MFD_DEV_WITH_ID(DLDO, 1),
83 MFD_DEV_WITH_ID(DLDO, 2),
84 MFD_DEV_WITH_ID(DLDO, 3),
85 MFD_DEV_WITH_ID(DLDO, 4),
86 MFD_DEV_WITH_ID(DLDO, 5),
87 MFD_DEV_WITH_ID(DLDO, 6),
88 MFD_DEV_WITH_ID(DLDO, 7),
89 MFD_DEV_WITH_ID(DLDO, 8),
90 MFD_DEV_WITH_ID(DLDO, 9),
91 MFD_DEV_WITH_ID(DLDO, 10),
92 MFD_DEV_WITH_ID(DLDO, 11),
93 MFD_DEV_WITH_ID(DLDO, 12),
95 /* 10 analog ldos */
96 MFD_DEV_WITH_ID(ALDO, 1),
97 MFD_DEV_WITH_ID(ALDO, 2),
98 MFD_DEV_WITH_ID(ALDO, 3),
99 MFD_DEV_WITH_ID(ALDO, 4),
100 MFD_DEV_WITH_ID(ALDO, 5),
101 MFD_DEV_WITH_ID(ALDO, 6),
102 MFD_DEV_WITH_ID(ALDO, 7),
103 MFD_DEV_WITH_ID(ALDO, 8),
104 MFD_DEV_WITH_ID(ALDO, 9),
105 MFD_DEV_WITH_ID(ALDO, 10),
107 /* ADC */
108 MFD_DEV_SIMPLE(ADC),
110 /* battery charger */
111 MFD_DEV_WITH_RESOURCE(CHARGER, chg_irqs, ARRAY_SIZE(chg_irqs)),
113 /* rtc */
114 MFD_DEV_WITH_RESOURCE(RTC, rtc_irqs, ARRAY_SIZE(rtc_irqs)),
116 /* backlight */
117 MFD_DEV_SIMPLE(BACKLIGHT),
119 /* current sink for vibrator */
120 MFD_DEV_SIMPLE(VIBRATOR),
122 /* current sink for keypad LED */
123 MFD_DEV_SIMPLE(KEYLED),
126 int lp8788_read_byte(struct lp8788 *lp, u8 reg, u8 *data)
128 int ret;
129 unsigned int val;
131 ret = regmap_read(lp->regmap, reg, &val);
132 if (ret < 0) {
133 dev_err(lp->dev, "failed to read 0x%.2x\n", reg);
134 return ret;
137 *data = (u8)val;
138 return 0;
140 EXPORT_SYMBOL_GPL(lp8788_read_byte);
142 int lp8788_read_multi_bytes(struct lp8788 *lp, u8 reg, u8 *data, size_t count)
144 return regmap_bulk_read(lp->regmap, reg, data, count);
146 EXPORT_SYMBOL_GPL(lp8788_read_multi_bytes);
148 int lp8788_write_byte(struct lp8788 *lp, u8 reg, u8 data)
150 return regmap_write(lp->regmap, reg, data);
152 EXPORT_SYMBOL_GPL(lp8788_write_byte);
154 int lp8788_update_bits(struct lp8788 *lp, u8 reg, u8 mask, u8 data)
156 return regmap_update_bits(lp->regmap, reg, mask, data);
158 EXPORT_SYMBOL_GPL(lp8788_update_bits);
160 static int lp8788_platform_init(struct lp8788 *lp)
162 struct lp8788_platform_data *pdata = lp->pdata;
164 return (pdata && pdata->init_func) ? pdata->init_func(lp) : 0;
167 static const struct regmap_config lp8788_regmap_config = {
168 .reg_bits = 8,
169 .val_bits = 8,
170 .max_register = MAX_LP8788_REGISTERS,
173 static int lp8788_probe(struct i2c_client *cl, const struct i2c_device_id *id)
175 struct lp8788 *lp;
176 struct lp8788_platform_data *pdata = dev_get_platdata(&cl->dev);
177 int ret;
179 lp = devm_kzalloc(&cl->dev, sizeof(struct lp8788), GFP_KERNEL);
180 if (!lp)
181 return -ENOMEM;
183 lp->regmap = devm_regmap_init_i2c(cl, &lp8788_regmap_config);
184 if (IS_ERR(lp->regmap)) {
185 ret = PTR_ERR(lp->regmap);
186 dev_err(&cl->dev, "regmap init i2c err: %d\n", ret);
187 return ret;
190 lp->pdata = pdata;
191 lp->dev = &cl->dev;
192 i2c_set_clientdata(cl, lp);
194 ret = lp8788_platform_init(lp);
195 if (ret)
196 return ret;
198 ret = lp8788_irq_init(lp, cl->irq);
199 if (ret)
200 return ret;
202 return mfd_add_devices(lp->dev, -1, lp8788_devs,
203 ARRAY_SIZE(lp8788_devs), NULL, 0, NULL);
206 static int lp8788_remove(struct i2c_client *cl)
208 struct lp8788 *lp = i2c_get_clientdata(cl);
210 mfd_remove_devices(lp->dev);
211 lp8788_irq_exit(lp);
212 return 0;
215 static const struct i2c_device_id lp8788_ids[] = {
216 {"lp8788", 0},
219 MODULE_DEVICE_TABLE(i2c, lp8788_ids);
221 static struct i2c_driver lp8788_driver = {
222 .driver = {
223 .name = "lp8788",
225 .probe = lp8788_probe,
226 .remove = lp8788_remove,
227 .id_table = lp8788_ids,
230 static int __init lp8788_init(void)
232 return i2c_add_driver(&lp8788_driver);
234 subsys_initcall(lp8788_init);
236 static void __exit lp8788_exit(void)
238 i2c_del_driver(&lp8788_driver);
240 module_exit(lp8788_exit);
242 MODULE_DESCRIPTION("TI LP8788 MFD Driver");
243 MODULE_AUTHOR("Milo Kim");
244 MODULE_LICENSE("GPL");