sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / mfd / max77620.c
blobb1700b5fa640f0d08958be6b060d7ab7b870860d
1 /*
2 * Maxim MAX77620 MFD Driver
4 * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
6 * Author:
7 * Laxman Dewangan <ldewangan@nvidia.com>
8 * Chaitanya Bandi <bandik@nvidia.com>
9 * Mallikarjun Kasoju <mkasoju@nvidia.com>
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
16 /****************** Teminology used in driver ********************
17 * Here are some terminology used from datasheet for quick reference:
18 * Flexible Power Sequence (FPS):
19 * The Flexible Power Sequencer (FPS) allows each regulator to power up under
20 * hardware or software control. Additionally, each regulator can power on
21 * independently or among a group of other regulators with an adjustable
22 * power-up and power-down delays (sequencing). GPIO1, GPIO2, and GPIO3 can
23 * be programmed to be part of a sequence allowing external regulators to be
24 * sequenced along with internal regulators. 32KHz clock can be programmed to
25 * be part of a sequence.
26 * There is 3 FPS confguration registers and all resources are configured to
27 * any of these FPS or no FPS.
30 #include <linux/i2c.h>
31 #include <linux/interrupt.h>
32 #include <linux/mfd/core.h>
33 #include <linux/mfd/max77620.h>
34 #include <linux/init.h>
35 #include <linux/of.h>
36 #include <linux/of_device.h>
37 #include <linux/regmap.h>
38 #include <linux/slab.h>
40 static const struct resource gpio_resources[] = {
41 DEFINE_RES_IRQ(MAX77620_IRQ_TOP_GPIO),
44 static const struct resource power_resources[] = {
45 DEFINE_RES_IRQ(MAX77620_IRQ_LBT_MBATLOW),
48 static const struct resource rtc_resources[] = {
49 DEFINE_RES_IRQ(MAX77620_IRQ_TOP_RTC),
52 static const struct resource thermal_resources[] = {
53 DEFINE_RES_IRQ(MAX77620_IRQ_LBT_TJALRM1),
54 DEFINE_RES_IRQ(MAX77620_IRQ_LBT_TJALRM2),
57 static const struct regmap_irq max77620_top_irqs[] = {
58 REGMAP_IRQ_REG(MAX77620_IRQ_TOP_GLBL, 0, MAX77620_IRQ_TOP_GLBL_MASK),
59 REGMAP_IRQ_REG(MAX77620_IRQ_TOP_SD, 0, MAX77620_IRQ_TOP_SD_MASK),
60 REGMAP_IRQ_REG(MAX77620_IRQ_TOP_LDO, 0, MAX77620_IRQ_TOP_LDO_MASK),
61 REGMAP_IRQ_REG(MAX77620_IRQ_TOP_GPIO, 0, MAX77620_IRQ_TOP_GPIO_MASK),
62 REGMAP_IRQ_REG(MAX77620_IRQ_TOP_RTC, 0, MAX77620_IRQ_TOP_RTC_MASK),
63 REGMAP_IRQ_REG(MAX77620_IRQ_TOP_32K, 0, MAX77620_IRQ_TOP_32K_MASK),
64 REGMAP_IRQ_REG(MAX77620_IRQ_TOP_ONOFF, 0, MAX77620_IRQ_TOP_ONOFF_MASK),
65 REGMAP_IRQ_REG(MAX77620_IRQ_LBT_MBATLOW, 1, MAX77620_IRQ_LBM_MASK),
66 REGMAP_IRQ_REG(MAX77620_IRQ_LBT_TJALRM1, 1, MAX77620_IRQ_TJALRM1_MASK),
67 REGMAP_IRQ_REG(MAX77620_IRQ_LBT_TJALRM2, 1, MAX77620_IRQ_TJALRM2_MASK),
70 static const struct mfd_cell max77620_children[] = {
71 { .name = "max77620-pinctrl", },
72 { .name = "max77620-clock", },
73 { .name = "max77620-pmic", },
74 { .name = "max77620-watchdog", },
76 .name = "max77620-gpio",
77 .resources = gpio_resources,
78 .num_resources = ARRAY_SIZE(gpio_resources),
79 }, {
80 .name = "max77620-rtc",
81 .resources = rtc_resources,
82 .num_resources = ARRAY_SIZE(rtc_resources),
83 }, {
84 .name = "max77620-power",
85 .resources = power_resources,
86 .num_resources = ARRAY_SIZE(power_resources),
87 }, {
88 .name = "max77620-thermal",
89 .resources = thermal_resources,
90 .num_resources = ARRAY_SIZE(thermal_resources),
94 static const struct mfd_cell max20024_children[] = {
95 { .name = "max20024-pinctrl", },
96 { .name = "max77620-clock", },
97 { .name = "max20024-pmic", },
98 { .name = "max77620-watchdog", },
100 .name = "max77620-gpio",
101 .resources = gpio_resources,
102 .num_resources = ARRAY_SIZE(gpio_resources),
103 }, {
104 .name = "max77620-rtc",
105 .resources = rtc_resources,
106 .num_resources = ARRAY_SIZE(rtc_resources),
107 }, {
108 .name = "max20024-power",
109 .resources = power_resources,
110 .num_resources = ARRAY_SIZE(power_resources),
114 static const struct regmap_range max77620_readable_ranges[] = {
115 regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
118 static const struct regmap_access_table max77620_readable_table = {
119 .yes_ranges = max77620_readable_ranges,
120 .n_yes_ranges = ARRAY_SIZE(max77620_readable_ranges),
123 static const struct regmap_range max20024_readable_ranges[] = {
124 regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
125 regmap_reg_range(MAX20024_REG_MAX_ADD, MAX20024_REG_MAX_ADD),
128 static const struct regmap_access_table max20024_readable_table = {
129 .yes_ranges = max20024_readable_ranges,
130 .n_yes_ranges = ARRAY_SIZE(max20024_readable_ranges),
133 static const struct regmap_range max77620_writable_ranges[] = {
134 regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
137 static const struct regmap_access_table max77620_writable_table = {
138 .yes_ranges = max77620_writable_ranges,
139 .n_yes_ranges = ARRAY_SIZE(max77620_writable_ranges),
142 static const struct regmap_range max77620_cacheable_ranges[] = {
143 regmap_reg_range(MAX77620_REG_SD0_CFG, MAX77620_REG_LDO_CFG3),
144 regmap_reg_range(MAX77620_REG_FPS_CFG0, MAX77620_REG_FPS_SD3),
147 static const struct regmap_access_table max77620_volatile_table = {
148 .no_ranges = max77620_cacheable_ranges,
149 .n_no_ranges = ARRAY_SIZE(max77620_cacheable_ranges),
152 static const struct regmap_config max77620_regmap_config = {
153 .name = "power-slave",
154 .reg_bits = 8,
155 .val_bits = 8,
156 .max_register = MAX77620_REG_DVSSD4 + 1,
157 .cache_type = REGCACHE_RBTREE,
158 .rd_table = &max77620_readable_table,
159 .wr_table = &max77620_writable_table,
160 .volatile_table = &max77620_volatile_table,
163 static const struct regmap_config max20024_regmap_config = {
164 .name = "power-slave",
165 .reg_bits = 8,
166 .val_bits = 8,
167 .max_register = MAX20024_REG_MAX_ADD + 1,
168 .cache_type = REGCACHE_RBTREE,
169 .rd_table = &max20024_readable_table,
170 .wr_table = &max77620_writable_table,
171 .volatile_table = &max77620_volatile_table,
175 * MAX77620 and MAX20024 has the following steps of the interrupt handling
176 * for TOP interrupts:
177 * 1. When interrupt occurs from PMIC, mask the PMIC interrupt by setting GLBLM.
178 * 2. Read IRQTOP and service the interrupt.
179 * 3. Once all interrupts has been checked and serviced, the interrupt service
180 * routine un-masks the hardware interrupt line by clearing GLBLM.
182 static int max77620_irq_global_mask(void *irq_drv_data)
184 struct max77620_chip *chip = irq_drv_data;
185 int ret;
187 ret = regmap_update_bits(chip->rmap, MAX77620_REG_INTENLBT,
188 MAX77620_GLBLM_MASK, MAX77620_GLBLM_MASK);
189 if (ret < 0)
190 dev_err(chip->dev, "Failed to set GLBLM: %d\n", ret);
192 return ret;
195 static int max77620_irq_global_unmask(void *irq_drv_data)
197 struct max77620_chip *chip = irq_drv_data;
198 int ret;
200 ret = regmap_update_bits(chip->rmap, MAX77620_REG_INTENLBT,
201 MAX77620_GLBLM_MASK, 0);
202 if (ret < 0)
203 dev_err(chip->dev, "Failed to reset GLBLM: %d\n", ret);
205 return ret;
208 static struct regmap_irq_chip max77620_top_irq_chip = {
209 .name = "max77620-top",
210 .irqs = max77620_top_irqs,
211 .num_irqs = ARRAY_SIZE(max77620_top_irqs),
212 .num_regs = 2,
213 .status_base = MAX77620_REG_IRQTOP,
214 .mask_base = MAX77620_REG_IRQTOPM,
215 .handle_pre_irq = max77620_irq_global_mask,
216 .handle_post_irq = max77620_irq_global_unmask,
219 /* max77620_get_fps_period_reg_value: Get FPS bit field value from
220 * requested periods.
221 * MAX77620 supports the FPS period of 40, 80, 160, 320, 540, 1280, 2560
222 * and 5120 microseconds. MAX20024 supports the FPS period of 20, 40, 80,
223 * 160, 320, 540, 1280 and 2560 microseconds.
224 * The FPS register has 3 bits field to set the FPS period as
225 * bits max77620 max20024
226 * 000 40 20
227 * 001 80 40
228 * :::
230 static int max77620_get_fps_period_reg_value(struct max77620_chip *chip,
231 int tperiod)
233 int fps_min_period;
234 int i;
236 switch (chip->chip_id) {
237 case MAX20024:
238 fps_min_period = MAX20024_FPS_PERIOD_MIN_US;
239 break;
240 case MAX77620:
241 fps_min_period = MAX77620_FPS_PERIOD_MIN_US;
242 break;
243 default:
244 return -EINVAL;
247 for (i = 0; i < 7; i++) {
248 if (fps_min_period >= tperiod)
249 return i;
250 fps_min_period *= 2;
253 return i;
256 /* max77620_config_fps: Configure FPS configuration registers
257 * based on platform specific information.
259 static int max77620_config_fps(struct max77620_chip *chip,
260 struct device_node *fps_np)
262 struct device *dev = chip->dev;
263 unsigned int mask = 0, config = 0;
264 u32 fps_max_period;
265 u32 param_val;
266 int tperiod, fps_id;
267 int ret;
268 char fps_name[10];
270 switch (chip->chip_id) {
271 case MAX20024:
272 fps_max_period = MAX20024_FPS_PERIOD_MAX_US;
273 break;
274 case MAX77620:
275 fps_max_period = MAX77620_FPS_PERIOD_MAX_US;
276 break;
277 default:
278 return -EINVAL;
281 for (fps_id = 0; fps_id < MAX77620_FPS_COUNT; fps_id++) {
282 sprintf(fps_name, "fps%d", fps_id);
283 if (!strcmp(fps_np->name, fps_name))
284 break;
287 if (fps_id == MAX77620_FPS_COUNT) {
288 dev_err(dev, "FPS node name %s is not valid\n", fps_np->name);
289 return -EINVAL;
292 ret = of_property_read_u32(fps_np, "maxim,shutdown-fps-time-period-us",
293 &param_val);
294 if (!ret) {
295 mask |= MAX77620_FPS_TIME_PERIOD_MASK;
296 chip->shutdown_fps_period[fps_id] = min(param_val,
297 fps_max_period);
298 tperiod = max77620_get_fps_period_reg_value(chip,
299 chip->shutdown_fps_period[fps_id]);
300 config |= tperiod << MAX77620_FPS_TIME_PERIOD_SHIFT;
303 ret = of_property_read_u32(fps_np, "maxim,suspend-fps-time-period-us",
304 &param_val);
305 if (!ret)
306 chip->suspend_fps_period[fps_id] = min(param_val,
307 fps_max_period);
309 ret = of_property_read_u32(fps_np, "maxim,fps-event-source",
310 &param_val);
311 if (!ret) {
312 if (param_val > 2) {
313 dev_err(dev, "FPS%d event-source invalid\n", fps_id);
314 return -EINVAL;
316 mask |= MAX77620_FPS_EN_SRC_MASK;
317 config |= param_val << MAX77620_FPS_EN_SRC_SHIFT;
318 if (param_val == 2) {
319 mask |= MAX77620_FPS_ENFPS_SW_MASK;
320 config |= MAX77620_FPS_ENFPS_SW;
324 if (!chip->sleep_enable && !chip->enable_global_lpm) {
325 ret = of_property_read_u32(fps_np,
326 "maxim,device-state-on-disabled-event",
327 &param_val);
328 if (!ret) {
329 if (param_val == 0)
330 chip->sleep_enable = true;
331 else if (param_val == 1)
332 chip->enable_global_lpm = true;
336 ret = regmap_update_bits(chip->rmap, MAX77620_REG_FPS_CFG0 + fps_id,
337 mask, config);
338 if (ret < 0) {
339 dev_err(dev, "Failed to update FPS CFG: %d\n", ret);
340 return ret;
343 return 0;
346 static int max77620_initialise_fps(struct max77620_chip *chip)
348 struct device *dev = chip->dev;
349 struct device_node *fps_np, *fps_child;
350 u8 config;
351 int fps_id;
352 int ret;
354 for (fps_id = 0; fps_id < MAX77620_FPS_COUNT; fps_id++) {
355 chip->shutdown_fps_period[fps_id] = -1;
356 chip->suspend_fps_period[fps_id] = -1;
359 fps_np = of_get_child_by_name(dev->of_node, "fps");
360 if (!fps_np)
361 goto skip_fps;
363 for_each_child_of_node(fps_np, fps_child) {
364 ret = max77620_config_fps(chip, fps_child);
365 if (ret < 0)
366 return ret;
369 config = chip->enable_global_lpm ? MAX77620_ONOFFCNFG2_SLP_LPM_MSK : 0;
370 ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
371 MAX77620_ONOFFCNFG2_SLP_LPM_MSK, config);
372 if (ret < 0) {
373 dev_err(dev, "Failed to update SLP_LPM: %d\n", ret);
374 return ret;
377 skip_fps:
378 /* Enable wake on EN0 pin */
379 ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
380 MAX77620_ONOFFCNFG2_WK_EN0,
381 MAX77620_ONOFFCNFG2_WK_EN0);
382 if (ret < 0) {
383 dev_err(dev, "Failed to update WK_EN0: %d\n", ret);
384 return ret;
387 /* For MAX20024, SLPEN will be POR reset if CLRSE is b11 */
388 if ((chip->chip_id == MAX20024) && chip->sleep_enable) {
389 config = MAX77620_ONOFFCNFG1_SLPEN | MAX20024_ONOFFCNFG1_CLRSE;
390 ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1,
391 config, config);
392 if (ret < 0) {
393 dev_err(dev, "Failed to update SLPEN: %d\n", ret);
394 return ret;
398 return 0;
401 static int max77620_read_es_version(struct max77620_chip *chip)
403 unsigned int val;
404 u8 cid_val[6];
405 int i;
406 int ret;
408 for (i = MAX77620_REG_CID0; i <= MAX77620_REG_CID5; i++) {
409 ret = regmap_read(chip->rmap, i, &val);
410 if (ret < 0) {
411 dev_err(chip->dev, "Failed to read CID: %d\n", ret);
412 return ret;
414 dev_dbg(chip->dev, "CID%d: 0x%02x\n",
415 i - MAX77620_REG_CID0, val);
416 cid_val[i - MAX77620_REG_CID0] = val;
419 /* CID4 is OTP Version and CID5 is ES version */
420 dev_info(chip->dev, "PMIC Version OTP:0x%02X and ES:0x%X\n",
421 cid_val[4], MAX77620_CID5_DIDM(cid_val[5]));
423 return ret;
426 static int max77620_probe(struct i2c_client *client,
427 const struct i2c_device_id *id)
429 const struct regmap_config *rmap_config;
430 struct max77620_chip *chip;
431 const struct mfd_cell *mfd_cells;
432 int n_mfd_cells;
433 int ret;
435 chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
436 if (!chip)
437 return -ENOMEM;
439 i2c_set_clientdata(client, chip);
440 chip->dev = &client->dev;
441 chip->irq_base = -1;
442 chip->chip_irq = client->irq;
443 chip->chip_id = (enum max77620_chip_id)id->driver_data;
445 switch (chip->chip_id) {
446 case MAX77620:
447 mfd_cells = max77620_children;
448 n_mfd_cells = ARRAY_SIZE(max77620_children);
449 rmap_config = &max77620_regmap_config;
450 break;
451 case MAX20024:
452 mfd_cells = max20024_children;
453 n_mfd_cells = ARRAY_SIZE(max20024_children);
454 rmap_config = &max20024_regmap_config;
455 break;
456 default:
457 dev_err(chip->dev, "ChipID is invalid %d\n", chip->chip_id);
458 return -EINVAL;
461 chip->rmap = devm_regmap_init_i2c(client, rmap_config);
462 if (IS_ERR(chip->rmap)) {
463 ret = PTR_ERR(chip->rmap);
464 dev_err(chip->dev, "Failed to initialise regmap: %d\n", ret);
465 return ret;
468 ret = max77620_read_es_version(chip);
469 if (ret < 0)
470 return ret;
472 max77620_top_irq_chip.irq_drv_data = chip;
473 ret = devm_regmap_add_irq_chip(chip->dev, chip->rmap, client->irq,
474 IRQF_ONESHOT | IRQF_SHARED,
475 chip->irq_base, &max77620_top_irq_chip,
476 &chip->top_irq_data);
477 if (ret < 0) {
478 dev_err(chip->dev, "Failed to add regmap irq: %d\n", ret);
479 return ret;
482 ret = max77620_initialise_fps(chip);
483 if (ret < 0)
484 return ret;
486 ret = devm_mfd_add_devices(chip->dev, PLATFORM_DEVID_NONE,
487 mfd_cells, n_mfd_cells, NULL, 0,
488 regmap_irq_get_domain(chip->top_irq_data));
489 if (ret < 0) {
490 dev_err(chip->dev, "Failed to add MFD children: %d\n", ret);
491 return ret;
494 return 0;
497 #ifdef CONFIG_PM_SLEEP
498 static int max77620_set_fps_period(struct max77620_chip *chip,
499 int fps_id, int time_period)
501 int period = max77620_get_fps_period_reg_value(chip, time_period);
502 int ret;
504 ret = regmap_update_bits(chip->rmap, MAX77620_REG_FPS_CFG0 + fps_id,
505 MAX77620_FPS_TIME_PERIOD_MASK,
506 period << MAX77620_FPS_TIME_PERIOD_SHIFT);
507 if (ret < 0) {
508 dev_err(chip->dev, "Failed to update FPS period: %d\n", ret);
509 return ret;
512 return 0;
515 static int max77620_i2c_suspend(struct device *dev)
517 struct max77620_chip *chip = dev_get_drvdata(dev);
518 struct i2c_client *client = to_i2c_client(dev);
519 unsigned int config;
520 int fps;
521 int ret;
523 for (fps = 0; fps < MAX77620_FPS_COUNT; fps++) {
524 if (chip->suspend_fps_period[fps] < 0)
525 continue;
527 ret = max77620_set_fps_period(chip, fps,
528 chip->suspend_fps_period[fps]);
529 if (ret < 0)
530 return ret;
534 * For MAX20024: No need to configure SLPEN on suspend as
535 * it will be configured on Init.
537 if (chip->chip_id == MAX20024)
538 goto out;
540 config = (chip->sleep_enable) ? MAX77620_ONOFFCNFG1_SLPEN : 0;
541 ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1,
542 MAX77620_ONOFFCNFG1_SLPEN,
543 config);
544 if (ret < 0) {
545 dev_err(dev, "Failed to configure sleep in suspend: %d\n", ret);
546 return ret;
549 /* Disable WK_EN0 */
550 ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
551 MAX77620_ONOFFCNFG2_WK_EN0, 0);
552 if (ret < 0) {
553 dev_err(dev, "Failed to configure WK_EN in suspend: %d\n", ret);
554 return ret;
557 out:
558 disable_irq(client->irq);
560 return 0;
563 static int max77620_i2c_resume(struct device *dev)
565 struct max77620_chip *chip = dev_get_drvdata(dev);
566 struct i2c_client *client = to_i2c_client(dev);
567 int ret;
568 int fps;
570 for (fps = 0; fps < MAX77620_FPS_COUNT; fps++) {
571 if (chip->shutdown_fps_period[fps] < 0)
572 continue;
574 ret = max77620_set_fps_period(chip, fps,
575 chip->shutdown_fps_period[fps]);
576 if (ret < 0)
577 return ret;
581 * For MAX20024: No need to configure WKEN0 on resume as
582 * it is configured on Init.
584 if (chip->chip_id == MAX20024)
585 goto out;
587 /* Enable WK_EN0 */
588 ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
589 MAX77620_ONOFFCNFG2_WK_EN0,
590 MAX77620_ONOFFCNFG2_WK_EN0);
591 if (ret < 0) {
592 dev_err(dev, "Failed to configure WK_EN0 n resume: %d\n", ret);
593 return ret;
596 out:
597 enable_irq(client->irq);
599 return 0;
601 #endif
603 static const struct i2c_device_id max77620_id[] = {
604 {"max77620", MAX77620},
605 {"max20024", MAX20024},
609 static const struct dev_pm_ops max77620_pm_ops = {
610 SET_SYSTEM_SLEEP_PM_OPS(max77620_i2c_suspend, max77620_i2c_resume)
613 static struct i2c_driver max77620_driver = {
614 .driver = {
615 .name = "max77620",
616 .pm = &max77620_pm_ops,
618 .probe = max77620_probe,
619 .id_table = max77620_id,
621 builtin_i2c_driver(max77620_driver);