?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / mmc / host / cb710-mmc.c
blob1087b4c79cd661bbf8bfe57f73470e681324b668
1 /*
2 * cb710/mmc.c
3 *
4 * Copyright by Michał Mirosław, 2008-2009
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/pci.h>
13 #include <linux/delay.h>
14 #include "cb710-mmc.h"
15
16 static const u8 cb710_clock_divider_log2[8] = {
17 /* 1, 2, 4, 8, 16, 32, 128, 512 */
18 0, 1, 2, 3, 4, 5, 7, 9
19 };
20 #define CB710_MAX_DIVIDER_IDX \
21 (ARRAY_SIZE(cb710_clock_divider_log2) - 1)
22
23 static const u8 cb710_src_freq_mhz[16] = {
24 33, 10, 20, 25, 30, 35, 40, 45,
25 50, 55, 60, 65, 70, 75, 80, 85
26 };
27
28 static void cb710_mmc_select_clock_divider(struct mmc_host *mmc, int hz)
29 {
30 struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
31 struct pci_dev *pdev = cb710_slot_to_chip(slot)->pdev;
32 u32 src_freq_idx;
33 u32 divider_idx;
34 int src_hz;
35
36 /* on CB710 in HP nx9500:
37 * src_freq_idx == 0
38 * indexes 1-7 work as written in the table
39 * indexes 0,8-15 give no clock output
40 */
41 pci_read_config_dword(pdev, 0x48, &src_freq_idx);
42 src_freq_idx = (src_freq_idx >> 16) & 0xF;
43 src_hz = cb710_src_freq_mhz[src_freq_idx] * 1000000;
44
45 for (divider_idx = 0; divider_idx < CB710_MAX_DIVIDER_IDX; ++divider_idx) {
46 if (hz >= src_hz >> cb710_clock_divider_log2[divider_idx])
47 break;
48 }
49
50 if (src_freq_idx)
51 divider_idx |= 0x8;
52 else if (divider_idx == 0)
53 divider_idx = 1;
54
55 cb710_pci_update_config_reg(pdev, 0x40, ~0xF0000000, divider_idx << 28);
56
57 dev_dbg(cb710_slot_dev(slot),
58 "clock set to %d Hz, wanted %d Hz; src_freq_idx = %d, divider_idx = %d|%d\n",
59 src_hz >> cb710_clock_divider_log2[divider_idx & 7],
60 hz, src_freq_idx, divider_idx & 7, divider_idx & 8);
61 }
62
63 static void __cb710_mmc_enable_irq(struct cb710_slot *slot,
64 unsigned short enable, unsigned short mask)
65 {
66 /* clear global IE
67 * - it gets set later if any interrupt sources are enabled */
68 mask |= CB710_MMC_IE_IRQ_ENABLE;
69
70 /* look like interrupt is fired whenever
71 * WORD[0x0C] & WORD[0x10] != 0;
72 * -> bit 15 port 0x0C seems to be global interrupt enable
73 */
74
75 enable = (cb710_read_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT)
76 & ~mask) | enable;
77
78 if (enable)
79 enable |= CB710_MMC_IE_IRQ_ENABLE;
80
81 cb710_write_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT, enable);
82 }
83
84 static void cb710_mmc_enable_irq(struct cb710_slot *slot,
85 unsigned short enable, unsigned short mask)
86 {
87 struct cb710_mmc_reader *reader = mmc_priv(cb710_slot_to_mmc(slot));
88 unsigned long flags;
89
90 spin_lock_irqsave(&reader->irq_lock, flags);
91 /* this is the only thing irq_lock protects */
92 __cb710_mmc_enable_irq(slot, enable, mask);
93 spin_unlock_irqrestore(&reader->irq_lock, flags);
94 }
95
96 static void cb710_mmc_reset_events(struct cb710_slot *slot)
97 {
98 cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, 0xFF);
99 cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, 0xFF);
100 cb710_write_port_8(slot, CB710_MMC_STATUS2_PORT, 0xFF);
101 }
102
103 static void cb710_mmc_enable_4bit_data(struct cb710_slot *slot, int enable)
104 {
105 if (enable)
106 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
107 CB710_MMC_C1_4BIT_DATA_BUS, 0);
108 else
109 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
110 0, CB710_MMC_C1_4BIT_DATA_BUS);
111 }
112
113 static int cb710_check_event(struct cb710_slot *slot, u8 what)
114 {
115 u16 status;
116
117 status = cb710_read_port_16(slot, CB710_MMC_STATUS_PORT);
118
119 if (status & CB710_MMC_S0_FIFO_UNDERFLOW) {
120 /* it is just a guess, so log it */
121 dev_dbg(cb710_slot_dev(slot),
122 "CHECK : ignoring bit 6 in status %04X\n", status);
123 cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
124 CB710_MMC_S0_FIFO_UNDERFLOW);
125 status &= ~CB710_MMC_S0_FIFO_UNDERFLOW;
126 }
127
128 if (status & CB710_MMC_STATUS_ERROR_EVENTS) {
129 dev_dbg(cb710_slot_dev(slot),
130 "CHECK : returning EIO on status %04X\n", status);
131 cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, status & 0xFF);
132 cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
133 CB710_MMC_S1_RESET);
134 return -EIO;
135 }
136
137 /* 'what' is a bit in MMC_STATUS1 */
138 if ((status >> 8) & what) {
139 cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, what);
140 return 1;
141 }
142
143 return 0;
144 }
145
146 static int cb710_wait_for_event(struct cb710_slot *slot, u8 what)
147 {
148 int err = 0;
149 unsigned limit = 2000000; /* FIXME: real timeout */
150
151 #ifdef CONFIG_CB710_DEBUG
152 u32 e, x;
153 e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
154 #endif
155
156 while (!(err = cb710_check_event(slot, what))) {
157 if (!--limit) {
158 cb710_dump_regs(cb710_slot_to_chip(slot),
159 CB710_DUMP_REGS_MMC);
160 err = -ETIMEDOUT;
161 break;
162 }
163 udelay(1);
164 }
165
166 #ifdef CONFIG_CB710_DEBUG
167 x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
168
169 limit = 2000000 - limit;
170 if (limit > 100)
171 dev_dbg(cb710_slot_dev(slot),
172 "WAIT10: waited %d loops, what %d, entry val %08X, exit val %08X\n",
173 limit, what, e, x);
174 #endif
175 return err < 0 ? err : 0;
176 }
177
178
179 static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask)
180 {
181 unsigned limit = 500000; /* FIXME: real timeout */
182 int err = 0;
183
184 #ifdef CONFIG_CB710_DEBUG
185 u32 e, x;
186 e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
187 #endif
188
189 while (cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & mask) {
190 if (!--limit) {
191 cb710_dump_regs(cb710_slot_to_chip(slot),
192 CB710_DUMP_REGS_MMC);
193 err = -ETIMEDOUT;
194 break;
195 }
196 udelay(1);
197 }
198
199 #ifdef CONFIG_CB710_DEBUG
200 x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
201
202 limit = 500000 - limit;
203 if (limit > 100)
204 dev_dbg(cb710_slot_dev(slot),
205 "WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n",
206 limit, mask, e, x);
207 #endif
208 return err;
209 }
210
211 static void cb710_mmc_set_transfer_size(struct cb710_slot *slot,
212 size_t count, size_t blocksize)
213 {
214 cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
215 cb710_write_port_32(slot, CB710_MMC_TRANSFER_SIZE_PORT,
216 ((count - 1) << 16)|(blocksize - 1));
217
218 dev_vdbg(cb710_slot_dev(slot), "set up for %zu block%s of %zu bytes\n",
219 count, count == 1 ? "" : "s", blocksize);
220 }
221
222 static void cb710_mmc_fifo_hack(struct cb710_slot *slot)
223 {
224 /* without this, received data is prepended with 8-bytes of zeroes */
225 u32 r1, r2;
226 int ok = 0;
227
228 r1 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
229 r2 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
230 if (cb710_read_port_8(slot, CB710_MMC_STATUS0_PORT)
231 & CB710_MMC_S0_FIFO_UNDERFLOW) {
232 cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
233 CB710_MMC_S0_FIFO_UNDERFLOW);
234 ok = 1;
235 }
236
237 dev_dbg(cb710_slot_dev(slot),
238 "FIFO-read-hack: expected STATUS0 bit was %s\n",
239 ok ? "set." : "NOT SET!");
240 dev_dbg(cb710_slot_dev(slot),
241 "FIFO-read-hack: dwords ignored: %08X %08X - %s\n",
242 r1, r2, (r1|r2) ? "BAD (NOT ZERO)!" : "ok");
243 }
244
245 static int cb710_mmc_receive_pio(struct cb710_slot *slot,
246 struct sg_mapping_iter *miter, size_t dw_count)
247 {
248 if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & CB710_MMC_S2_FIFO_READY)) {
249 int err = cb710_wait_for_event(slot,
250 CB710_MMC_S1_PIO_TRANSFER_DONE);
251 if (err)
252 return err;
253 }
254
255 cb710_sg_dwiter_write_from_io(miter,
256 slot->iobase + CB710_MMC_DATA_PORT, dw_count);
257
258 return 0;
259 }
260
261 static bool cb710_is_transfer_size_supported(struct mmc_data *data)
262 {
263 return !(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8));
264 }
265
266 static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
267 {
268 struct sg_mapping_iter miter;
269 size_t len, blocks = data->blocks;
270 int err = 0;
271
272 /* TODO: I don't know how/if the hardware handles non-16B-boundary blocks
273 * except single 8B block */
274 if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)))
275 return -EINVAL;
276
277 sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG);
278
279 cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
280 15, CB710_MMC_C2_READ_PIO_SIZE_MASK);
281
282 cb710_mmc_fifo_hack(slot);
283
284 while (blocks-- > 0) {
285 len = data->blksz;
286
287 while (len >= 16) {
288 err = cb710_mmc_receive_pio(slot, &miter, 4);
289 if (err)
290 goto out;
291 len -= 16;
292 }
293
294 if (!len)
295 continue;
296
297 cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
298 len - 1, CB710_MMC_C2_READ_PIO_SIZE_MASK);
299
300 len = (len >= 8) ? 4 : 2;
301 err = cb710_mmc_receive_pio(slot, &miter, len);
302 if (err)
303 goto out;
304 }
305 out:
306 sg_miter_stop(&miter);
307 return err;
308 }
309
310 static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data)
311 {
312 struct sg_mapping_iter miter;
313 size_t len, blocks = data->blocks;
314 int err = 0;
315
316 /* TODO: I don't know how/if the hardware handles multiple
317 * non-16B-boundary blocks */
318 if (unlikely(data->blocks > 1 && data->blksz & 15))
319 return -EINVAL;
320
321 sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG);
322
323 cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
324 0, CB710_MMC_C2_READ_PIO_SIZE_MASK);
325
326 while (blocks-- > 0) {
327 len = (data->blksz + 15) >> 4;
328 do {
329 if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT)
330 & CB710_MMC_S2_FIFO_EMPTY)) {
331 err = cb710_wait_for_event(slot,
332 CB710_MMC_S1_PIO_TRANSFER_DONE);
333 if (err)
334 goto out;
335 }
336 cb710_sg_dwiter_read_to_io(&miter,
337 slot->iobase + CB710_MMC_DATA_PORT, 4);
338 } while (--len);
339 }
340 out:
341 sg_miter_stop(&miter);
342 return err;
343 }
344
345 static u16 cb710_encode_cmd_flags(struct cb710_mmc_reader *reader,
346 struct mmc_command *cmd)
347 {
348 unsigned int flags = cmd->flags;
349 u16 cb_flags = 0;
350
351 /* Windows driver returned 0 for commands for which no response
352 * is expected. It happened that there were only two such commands
353 * used: MMC_GO_IDLE_STATE and MMC_GO_INACTIVE_STATE so it might
354 * as well be a bug in that driver.
355 *
356 * Original driver set bit 14 for MMC/SD application
357 * commands. There's no difference 'on the wire' and
358 * it apparently works without it anyway.
359 */
360
361 switch (flags & MMC_CMD_MASK) {
362 case MMC_CMD_AC: cb_flags = CB710_MMC_CMD_AC; break;
363 case MMC_CMD_ADTC: cb_flags = CB710_MMC_CMD_ADTC; break;
364 case MMC_CMD_BC: cb_flags = CB710_MMC_CMD_BC; break;
365 case MMC_CMD_BCR: cb_flags = CB710_MMC_CMD_BCR; break;
366 }
367
368 if (flags & MMC_RSP_BUSY)
369 cb_flags |= CB710_MMC_RSP_BUSY;
370
371 cb_flags |= cmd->opcode << CB710_MMC_CMD_CODE_SHIFT;
372
373 if (cmd->data && (cmd->data->flags & MMC_DATA_READ))
374 cb_flags |= CB710_MMC_DATA_READ;
375
376 if (flags & MMC_RSP_PRESENT) {
377 /* Windows driver set 01 at bits 4,3 except for
378 * MMC_SET_BLOCKLEN where it set 10. Maybe the
379 * hardware can do something special about this
380 * command? The original driver looks buggy/incomplete
381 * anyway so we ignore this for now.
382 *
383 * I assume that 00 here means no response is expected.
384 */
385 cb_flags |= CB710_MMC_RSP_PRESENT;
386
387 if (flags & MMC_RSP_136)
388 cb_flags |= CB710_MMC_RSP_136;
389 if (!(flags & MMC_RSP_CRC))
390 cb_flags |= CB710_MMC_RSP_NO_CRC;
391 }
392
393 return cb_flags;
394 }
395
396 static void cb710_receive_response(struct cb710_slot *slot,
397 struct mmc_command *cmd)
398 {
399 unsigned rsp_opcode, wanted_opcode;
400
401 /* Looks like final byte with CRC is always stripped (same as SDHCI) */
402 if (cmd->flags & MMC_RSP_136) {
403 u32 resp[4];
404
405 resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE3_PORT);
406 resp[1] = cb710_read_port_32(slot, CB710_MMC_RESPONSE2_PORT);
407 resp[2] = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT);
408 resp[3] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
409 rsp_opcode = resp[0] >> 24;
410
411 cmd->resp[0] = (resp[0] << 8)|(resp[1] >> 24);
412 cmd->resp[1] = (resp[1] << 8)|(resp[2] >> 24);
413 cmd->resp[2] = (resp[2] << 8)|(resp[3] >> 24);
414 cmd->resp[3] = (resp[3] << 8);
415 } else {
416 rsp_opcode = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT) & 0x3F;
417 cmd->resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
418 }
419
420 wanted_opcode = (cmd->flags & MMC_RSP_OPCODE) ? cmd->opcode : 0x3F;
421 if (rsp_opcode != wanted_opcode)
422 cmd->error = -EILSEQ;
423 }
424
425 static int cb710_mmc_transfer_data(struct cb710_slot *slot,
426 struct mmc_data *data)
427 {
428 int error, to;
429
430 if (data->flags & MMC_DATA_READ)
431 error = cb710_mmc_receive(slot, data);
432 else
433 error = cb710_mmc_send(slot, data);
434
435 to = cb710_wait_for_event(slot, CB710_MMC_S1_DATA_TRANSFER_DONE);
436 if (!error)
437 error = to;
438
439 if (!error)
440 data->bytes_xfered = data->blksz * data->blocks;
441 return error;
442 }
443
444 static int cb710_mmc_command(struct mmc_host *mmc, struct mmc_command *cmd)
445 {
446 struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
447 struct cb710_mmc_reader *reader = mmc_priv(mmc);
448 struct mmc_data *data = cmd->data;
449
450 u16 cb_cmd = cb710_encode_cmd_flags(reader, cmd);
451 dev_dbg(cb710_slot_dev(slot), "cmd request: 0x%04X\n", cb_cmd);
452
453 if (data) {
454 if (!cb710_is_transfer_size_supported(data)) {
455 data->error = -EINVAL;
456 return -1;
457 }
458 cb710_mmc_set_transfer_size(slot, data->blocks, data->blksz);
459 }
460
461 cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20|CB710_MMC_S2_BUSY_10);
462 cb710_write_port_16(slot, CB710_MMC_CMD_TYPE_PORT, cb_cmd);
463 cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
464 cb710_write_port_32(slot, CB710_MMC_CMD_PARAM_PORT, cmd->arg);
465 cb710_mmc_reset_events(slot);
466 cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
467 cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x01, 0);
468
469 cmd->error = cb710_wait_for_event(slot, CB710_MMC_S1_COMMAND_SENT);
470 if (cmd->error)
471 return -1;
472
473 if (cmd->flags & MMC_RSP_PRESENT) {
474 cb710_receive_response(slot, cmd);
475 if (cmd->error)
476 return -1;
477 }
478
479 if (data)
480 data->error = cb710_mmc_transfer_data(slot, data);
481 return 0;
482 }
483
484 static void cb710_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
485 {
486 struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
487 struct cb710_mmc_reader *reader = mmc_priv(mmc);
488
489 WARN_ON(reader->mrq != NULL);
490
491 reader->mrq = mrq;
492 cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
493
494 if (!cb710_mmc_command(mmc, mrq->cmd) && mrq->stop)
495 cb710_mmc_command(mmc, mrq->stop);
496
497 tasklet_schedule(&reader->finish_req_tasklet);
498 }
499
500 static int cb710_mmc_powerup(struct cb710_slot *slot)
501 {
502 #ifdef CONFIG_CB710_DEBUG
503 struct cb710_chip *chip = cb710_slot_to_chip(slot);
504 #endif
505 int err;
506
507 /* a lot of magic for now */
508 dev_dbg(cb710_slot_dev(slot), "bus powerup\n");
509 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
510 err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
511 if (unlikely(err))
512 return err;
513 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x80, 0);
514 cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x80, 0);
515 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
516 mdelay(1);
517 dev_dbg(cb710_slot_dev(slot), "after delay 1\n");
518 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
519 err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
520 if (unlikely(err))
521 return err;
522 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x09, 0);
523 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
524 mdelay(1);
525 dev_dbg(cb710_slot_dev(slot), "after delay 2\n");
526 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
527 err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
528 if (unlikely(err))
529 return err;
530 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x08);
531 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
532 mdelay(2);
533 dev_dbg(cb710_slot_dev(slot), "after delay 3\n");
534 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
535 cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
536 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x70, 0);
537 cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 0x80, 0);
538 cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x03, 0);
539 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
540 err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
541 if (unlikely(err))
542 return err;
543 /* This port behaves weird: quick byte reads of 0x08,0x09 return
544 * 0xFF,0x00 after writing 0xFFFF to 0x08; it works correctly when
545 * read/written from userspace... What am I missing here?
546 * (it doesn't depend on write-to-read delay) */
547 cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0xFFFF);
548 cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
549 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
550 dev_dbg(cb710_slot_dev(slot), "bus powerup finished\n");
551
552 return cb710_check_event(slot, 0);
553 }
554
555 static void cb710_mmc_powerdown(struct cb710_slot *slot)
556 {
557 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x81);
558 cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0, 0x80);
559 }
560
561 static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
562 {
563 struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
564 struct cb710_mmc_reader *reader = mmc_priv(mmc);
565 int err;
566
567 cb710_mmc_select_clock_divider(mmc, ios->clock);
568
569 if (ios->power_mode != reader->last_power_mode)
570 switch (ios->power_mode) {
571 case MMC_POWER_ON:
572 err = cb710_mmc_powerup(slot);
573 if (err) {
574 dev_warn(cb710_slot_dev(slot),
575 "powerup failed (%d)- retrying\n", err);
576 cb710_mmc_powerdown(slot);
577 udelay(1);
578 err = cb710_mmc_powerup(slot);
579 if (err)
580 dev_warn(cb710_slot_dev(slot),
581 "powerup retry failed (%d) - expect errors\n",
582 err);
583 }
584 reader->last_power_mode = MMC_POWER_ON;
585 break;
586 case MMC_POWER_OFF:
587 cb710_mmc_powerdown(slot);
588 reader->last_power_mode = MMC_POWER_OFF;
589 break;
590 case MMC_POWER_UP:
591 default:
592 /* ignore */;
593 }
594
595 cb710_mmc_enable_4bit_data(slot, ios->bus_width != MMC_BUS_WIDTH_1);
596
597 cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
598 }
599
600 static int cb710_mmc_get_ro(struct mmc_host *mmc)
601 {
602 struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
603
604 return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
605 & CB710_MMC_S3_WRITE_PROTECTED;
606 }
607
608 static int cb710_mmc_get_cd(struct mmc_host *mmc)
609 {
610 struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
611
612 return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
613 & CB710_MMC_S3_CARD_DETECTED;
614 }
615
616 static int cb710_mmc_irq_handler(struct cb710_slot *slot)
617 {
618 struct mmc_host *mmc = cb710_slot_to_mmc(slot);
619 struct cb710_mmc_reader *reader = mmc_priv(mmc);
620 u32 status, config1, config2, irqen;
621
622 status = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
623 irqen = cb710_read_port_32(slot, CB710_MMC_IRQ_ENABLE_PORT);
624 config2 = cb710_read_port_32(slot, CB710_MMC_CONFIGB_PORT);
625 config1 = cb710_read_port_32(slot, CB710_MMC_CONFIG_PORT);
626
627 dev_dbg(cb710_slot_dev(slot), "interrupt; status: %08X, "
628 "ie: %08X, c2: %08X, c1: %08X\n",
629 status, irqen, config2, config1);
630
631 if (status & (CB710_MMC_S1_CARD_CHANGED << 8)) {
632 /* ack the event */
633 cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
634 CB710_MMC_S1_CARD_CHANGED);
635 if ((irqen & CB710_MMC_IE_CISTATUS_MASK)
636 == CB710_MMC_IE_CISTATUS_MASK)
637 mmc_detect_change(mmc, HZ/5);
638 } else {
639 dev_dbg(cb710_slot_dev(slot), "unknown interrupt (test)\n");
640 spin_lock(&reader->irq_lock);
641 __cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_TEST_MASK);
642 spin_unlock(&reader->irq_lock);
643 }
644
645 return 1;
646 }
647
648 static void cb710_mmc_finish_request_tasklet(unsigned long data)
649 {
650 struct mmc_host *mmc = (void *)data;
651 struct cb710_mmc_reader *reader = mmc_priv(mmc);
652 struct mmc_request *mrq = reader->mrq;
653
654 reader->mrq = NULL;
655 mmc_request_done(mmc, mrq);
656 }
657
658 static const struct mmc_host_ops cb710_mmc_host = {
659 .request = cb710_mmc_request,
660 .set_ios = cb710_mmc_set_ios,
661 .get_ro = cb710_mmc_get_ro,
662 .get_cd = cb710_mmc_get_cd,
663 };
664
665 #ifdef CONFIG_PM
666
667 static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state)
668 {
669 struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
670
671 cb710_mmc_enable_irq(slot, 0, ~0);
672 return 0;
673 }
674
675 static int cb710_mmc_resume(struct platform_device *pdev)
676 {
677 struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
678
679 cb710_mmc_enable_irq(slot, 0, ~0);
680 return 0;
681 }
682
683 #endif /* CONFIG_PM */
684
685 static int cb710_mmc_init(struct platform_device *pdev)
686 {
687 struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
688 struct cb710_chip *chip = cb710_slot_to_chip(slot);
689 struct mmc_host *mmc;
690 struct cb710_mmc_reader *reader;
691 int err;
692 u32 val;
693
694 mmc = mmc_alloc_host(sizeof(*reader), cb710_slot_dev(slot));
695 if (!mmc)
696 return -ENOMEM;
697
698 platform_set_drvdata(pdev, mmc);
699
700 /* harmless (maybe) magic */
701 pci_read_config_dword(chip->pdev, 0x48, &val);
702 val = cb710_src_freq_mhz[(val >> 16) & 0xF];
703 dev_dbg(cb710_slot_dev(slot), "source frequency: %dMHz\n", val);
704 val *= 1000000;
705
706 mmc->ops = &cb710_mmc_host;
707 mmc->f_max = val;
708 mmc->f_min = val >> cb710_clock_divider_log2[CB710_MAX_DIVIDER_IDX];
709 mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
710 mmc->caps = MMC_CAP_4_BIT_DATA;
711
712 reader = mmc_priv(mmc);
713
714 tasklet_init(&reader->finish_req_tasklet,
715 cb710_mmc_finish_request_tasklet, (unsigned long)mmc);
716 spin_lock_init(&reader->irq_lock);
717 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
718
719 cb710_mmc_enable_irq(slot, 0, ~0);
720 cb710_set_irq_handler(slot, cb710_mmc_irq_handler);
721
722 err = mmc_add_host(mmc);
723 if (unlikely(err))
724 goto err_free_mmc;
725
726 dev_dbg(cb710_slot_dev(slot), "mmc_hostname is %s\n",
727 mmc_hostname(mmc));
728
729 cb710_mmc_enable_irq(slot, CB710_MMC_IE_CARD_INSERTION_STATUS, 0);
730
731 return 0;
732
733 err_free_mmc:
734 dev_dbg(cb710_slot_dev(slot), "mmc_add_host() failed: %d\n", err);
735
736 cb710_set_irq_handler(slot, NULL);
737 mmc_free_host(mmc);
738 return err;
739 }
740
741 static int cb710_mmc_exit(struct platform_device *pdev)
742 {
743 struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
744 struct mmc_host *mmc = cb710_slot_to_mmc(slot);
745 struct cb710_mmc_reader *reader = mmc_priv(mmc);
746
747 cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_CARD_INSERTION_STATUS);
748
749 mmc_remove_host(mmc);
750
751 /* IRQs should be disabled now, but let's stay on the safe side */
752 cb710_mmc_enable_irq(slot, 0, ~0);
753 cb710_set_irq_handler(slot, NULL);
754
755 /* clear config ports - just in case */
756 cb710_write_port_32(slot, CB710_MMC_CONFIG_PORT, 0);
757 cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0);
758
759 tasklet_kill(&reader->finish_req_tasklet);
760
761 mmc_free_host(mmc);
762 return 0;
763 }
764
765 static struct platform_driver cb710_mmc_driver = {
766 .driver.name = "cb710-mmc",
767 .probe = cb710_mmc_init,
768 .remove = cb710_mmc_exit,
769 #ifdef CONFIG_PM
770 .suspend = cb710_mmc_suspend,
771 .resume = cb710_mmc_resume,
772 #endif
773 };
774
775 module_platform_driver(cb710_mmc_driver);
776
777 MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>");
778 MODULE_DESCRIPTION("ENE CB710 memory card reader driver - MMC/SD part");
779 MODULE_LICENSE("GPL");
780 MODULE_ALIAS("platform:cb710-mmc");
Linux with added FPC-III support