sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / mmc / host / sdhci.h
blob0b66f210ae82c5d64f8301a81a6e938a39048b7f
1 /*
2 * linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
4 * Header file for Host Controller registers and I/O accessors.
6 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or (at
11 * your option) any later version.
13 #ifndef __SDHCI_HW_H
14 #define __SDHCI_HW_H
16 #include <linux/scatterlist.h>
17 #include <linux/compiler.h>
18 #include <linux/types.h>
19 #include <linux/io.h>
21 #include <linux/mmc/host.h>
24 * Controller registers
27 #define SDHCI_DMA_ADDRESS 0x00
28 #define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS
30 #define SDHCI_BLOCK_SIZE 0x04
31 #define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
33 #define SDHCI_BLOCK_COUNT 0x06
35 #define SDHCI_ARGUMENT 0x08
37 #define SDHCI_TRANSFER_MODE 0x0C
38 #define SDHCI_TRNS_DMA 0x01
39 #define SDHCI_TRNS_BLK_CNT_EN 0x02
40 #define SDHCI_TRNS_AUTO_CMD12 0x04
41 #define SDHCI_TRNS_AUTO_CMD23 0x08
42 #define SDHCI_TRNS_READ 0x10
43 #define SDHCI_TRNS_MULTI 0x20
45 #define SDHCI_COMMAND 0x0E
46 #define SDHCI_CMD_RESP_MASK 0x03
47 #define SDHCI_CMD_CRC 0x08
48 #define SDHCI_CMD_INDEX 0x10
49 #define SDHCI_CMD_DATA 0x20
50 #define SDHCI_CMD_ABORTCMD 0xC0
52 #define SDHCI_CMD_RESP_NONE 0x00
53 #define SDHCI_CMD_RESP_LONG 0x01
54 #define SDHCI_CMD_RESP_SHORT 0x02
55 #define SDHCI_CMD_RESP_SHORT_BUSY 0x03
57 #define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
58 #define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
60 #define SDHCI_RESPONSE 0x10
62 #define SDHCI_BUFFER 0x20
64 #define SDHCI_PRESENT_STATE 0x24
65 #define SDHCI_CMD_INHIBIT 0x00000001
66 #define SDHCI_DATA_INHIBIT 0x00000002
67 #define SDHCI_DOING_WRITE 0x00000100
68 #define SDHCI_DOING_READ 0x00000200
69 #define SDHCI_SPACE_AVAILABLE 0x00000400
70 #define SDHCI_DATA_AVAILABLE 0x00000800
71 #define SDHCI_CARD_PRESENT 0x00010000
72 #define SDHCI_WRITE_PROTECT 0x00080000
73 #define SDHCI_DATA_LVL_MASK 0x00F00000
74 #define SDHCI_DATA_LVL_SHIFT 20
75 #define SDHCI_DATA_0_LVL_MASK 0x00100000
76 #define SDHCI_CMD_LVL 0x01000000
78 #define SDHCI_HOST_CONTROL 0x28
79 #define SDHCI_CTRL_LED 0x01
80 #define SDHCI_CTRL_4BITBUS 0x02
81 #define SDHCI_CTRL_HISPD 0x04
82 #define SDHCI_CTRL_DMA_MASK 0x18
83 #define SDHCI_CTRL_SDMA 0x00
84 #define SDHCI_CTRL_ADMA1 0x08
85 #define SDHCI_CTRL_ADMA32 0x10
86 #define SDHCI_CTRL_ADMA64 0x18
87 #define SDHCI_CTRL_8BITBUS 0x20
88 #define SDHCI_CTRL_CDTEST_INS 0x40
89 #define SDHCI_CTRL_CDTEST_EN 0x80
91 #define SDHCI_POWER_CONTROL 0x29
92 #define SDHCI_POWER_ON 0x01
93 #define SDHCI_POWER_180 0x0A
94 #define SDHCI_POWER_300 0x0C
95 #define SDHCI_POWER_330 0x0E
97 #define SDHCI_BLOCK_GAP_CONTROL 0x2A
99 #define SDHCI_WAKE_UP_CONTROL 0x2B
100 #define SDHCI_WAKE_ON_INT 0x01
101 #define SDHCI_WAKE_ON_INSERT 0x02
102 #define SDHCI_WAKE_ON_REMOVE 0x04
104 #define SDHCI_CLOCK_CONTROL 0x2C
105 #define SDHCI_DIVIDER_SHIFT 8
106 #define SDHCI_DIVIDER_HI_SHIFT 6
107 #define SDHCI_DIV_MASK 0xFF
108 #define SDHCI_DIV_MASK_LEN 8
109 #define SDHCI_DIV_HI_MASK 0x300
110 #define SDHCI_PROG_CLOCK_MODE 0x0020
111 #define SDHCI_CLOCK_CARD_EN 0x0004
112 #define SDHCI_CLOCK_INT_STABLE 0x0002
113 #define SDHCI_CLOCK_INT_EN 0x0001
115 #define SDHCI_TIMEOUT_CONTROL 0x2E
117 #define SDHCI_SOFTWARE_RESET 0x2F
118 #define SDHCI_RESET_ALL 0x01
119 #define SDHCI_RESET_CMD 0x02
120 #define SDHCI_RESET_DATA 0x04
122 #define SDHCI_INT_STATUS 0x30
123 #define SDHCI_INT_ENABLE 0x34
124 #define SDHCI_SIGNAL_ENABLE 0x38
125 #define SDHCI_INT_RESPONSE 0x00000001
126 #define SDHCI_INT_DATA_END 0x00000002
127 #define SDHCI_INT_BLK_GAP 0x00000004
128 #define SDHCI_INT_DMA_END 0x00000008
129 #define SDHCI_INT_SPACE_AVAIL 0x00000010
130 #define SDHCI_INT_DATA_AVAIL 0x00000020
131 #define SDHCI_INT_CARD_INSERT 0x00000040
132 #define SDHCI_INT_CARD_REMOVE 0x00000080
133 #define SDHCI_INT_CARD_INT 0x00000100
134 #define SDHCI_INT_RETUNE 0x00001000
135 #define SDHCI_INT_ERROR 0x00008000
136 #define SDHCI_INT_TIMEOUT 0x00010000
137 #define SDHCI_INT_CRC 0x00020000
138 #define SDHCI_INT_END_BIT 0x00040000
139 #define SDHCI_INT_INDEX 0x00080000
140 #define SDHCI_INT_DATA_TIMEOUT 0x00100000
141 #define SDHCI_INT_DATA_CRC 0x00200000
142 #define SDHCI_INT_DATA_END_BIT 0x00400000
143 #define SDHCI_INT_BUS_POWER 0x00800000
144 #define SDHCI_INT_ACMD12ERR 0x01000000
145 #define SDHCI_INT_ADMA_ERROR 0x02000000
147 #define SDHCI_INT_NORMAL_MASK 0x00007FFF
148 #define SDHCI_INT_ERROR_MASK 0xFFFF8000
150 #define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
151 SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
152 #define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
153 SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
154 SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
155 SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \
156 SDHCI_INT_BLK_GAP)
157 #define SDHCI_INT_ALL_MASK ((unsigned int)-1)
159 #define SDHCI_ACMD12_ERR 0x3C
161 #define SDHCI_HOST_CONTROL2 0x3E
162 #define SDHCI_CTRL_UHS_MASK 0x0007
163 #define SDHCI_CTRL_UHS_SDR12 0x0000
164 #define SDHCI_CTRL_UHS_SDR25 0x0001
165 #define SDHCI_CTRL_UHS_SDR50 0x0002
166 #define SDHCI_CTRL_UHS_SDR104 0x0003
167 #define SDHCI_CTRL_UHS_DDR50 0x0004
168 #define SDHCI_CTRL_HS400 0x0005 /* Non-standard */
169 #define SDHCI_CTRL_VDD_180 0x0008
170 #define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
171 #define SDHCI_CTRL_DRV_TYPE_B 0x0000
172 #define SDHCI_CTRL_DRV_TYPE_A 0x0010
173 #define SDHCI_CTRL_DRV_TYPE_C 0x0020
174 #define SDHCI_CTRL_DRV_TYPE_D 0x0030
175 #define SDHCI_CTRL_EXEC_TUNING 0x0040
176 #define SDHCI_CTRL_TUNED_CLK 0x0080
177 #define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
179 #define SDHCI_CAPABILITIES 0x40
180 #define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
181 #define SDHCI_TIMEOUT_CLK_SHIFT 0
182 #define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
183 #define SDHCI_CLOCK_BASE_MASK 0x00003F00
184 #define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00
185 #define SDHCI_CLOCK_BASE_SHIFT 8
186 #define SDHCI_MAX_BLOCK_MASK 0x00030000
187 #define SDHCI_MAX_BLOCK_SHIFT 16
188 #define SDHCI_CAN_DO_8BIT 0x00040000
189 #define SDHCI_CAN_DO_ADMA2 0x00080000
190 #define SDHCI_CAN_DO_ADMA1 0x00100000
191 #define SDHCI_CAN_DO_HISPD 0x00200000
192 #define SDHCI_CAN_DO_SDMA 0x00400000
193 #define SDHCI_CAN_DO_SUSPEND 0x00800000
194 #define SDHCI_CAN_VDD_330 0x01000000
195 #define SDHCI_CAN_VDD_300 0x02000000
196 #define SDHCI_CAN_VDD_180 0x04000000
197 #define SDHCI_CAN_64BIT 0x10000000
199 #define SDHCI_SUPPORT_SDR50 0x00000001
200 #define SDHCI_SUPPORT_SDR104 0x00000002
201 #define SDHCI_SUPPORT_DDR50 0x00000004
202 #define SDHCI_DRIVER_TYPE_A 0x00000010
203 #define SDHCI_DRIVER_TYPE_C 0x00000020
204 #define SDHCI_DRIVER_TYPE_D 0x00000040
205 #define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00
206 #define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8
207 #define SDHCI_USE_SDR50_TUNING 0x00002000
208 #define SDHCI_RETUNING_MODE_MASK 0x0000C000
209 #define SDHCI_RETUNING_MODE_SHIFT 14
210 #define SDHCI_CLOCK_MUL_MASK 0x00FF0000
211 #define SDHCI_CLOCK_MUL_SHIFT 16
212 #define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
214 #define SDHCI_CAPABILITIES_1 0x44
216 #define SDHCI_MAX_CURRENT 0x48
217 #define SDHCI_MAX_CURRENT_LIMIT 0xFF
218 #define SDHCI_MAX_CURRENT_330_MASK 0x0000FF
219 #define SDHCI_MAX_CURRENT_330_SHIFT 0
220 #define SDHCI_MAX_CURRENT_300_MASK 0x00FF00
221 #define SDHCI_MAX_CURRENT_300_SHIFT 8
222 #define SDHCI_MAX_CURRENT_180_MASK 0xFF0000
223 #define SDHCI_MAX_CURRENT_180_SHIFT 16
224 #define SDHCI_MAX_CURRENT_MULTIPLIER 4
226 /* 4C-4F reserved for more max current */
228 #define SDHCI_SET_ACMD12_ERROR 0x50
229 #define SDHCI_SET_INT_ERROR 0x52
231 #define SDHCI_ADMA_ERROR 0x54
233 /* 55-57 reserved */
235 #define SDHCI_ADMA_ADDRESS 0x58
236 #define SDHCI_ADMA_ADDRESS_HI 0x5C
238 /* 60-FB reserved */
240 #define SDHCI_PRESET_FOR_SDR12 0x66
241 #define SDHCI_PRESET_FOR_SDR25 0x68
242 #define SDHCI_PRESET_FOR_SDR50 0x6A
243 #define SDHCI_PRESET_FOR_SDR104 0x6C
244 #define SDHCI_PRESET_FOR_DDR50 0x6E
245 #define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
246 #define SDHCI_PRESET_DRV_MASK 0xC000
247 #define SDHCI_PRESET_DRV_SHIFT 14
248 #define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400
249 #define SDHCI_PRESET_CLKGEN_SEL_SHIFT 10
250 #define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF
251 #define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0
253 #define SDHCI_SLOT_INT_STATUS 0xFC
255 #define SDHCI_HOST_VERSION 0xFE
256 #define SDHCI_VENDOR_VER_MASK 0xFF00
257 #define SDHCI_VENDOR_VER_SHIFT 8
258 #define SDHCI_SPEC_VER_MASK 0x00FF
259 #define SDHCI_SPEC_VER_SHIFT 0
260 #define SDHCI_SPEC_100 0
261 #define SDHCI_SPEC_200 1
262 #define SDHCI_SPEC_300 2
265 * End of controller registers.
268 #define SDHCI_MAX_DIV_SPEC_200 256
269 #define SDHCI_MAX_DIV_SPEC_300 2046
272 * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
274 #define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024)
275 #define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)
277 /* ADMA2 32-bit DMA descriptor size */
278 #define SDHCI_ADMA2_32_DESC_SZ 8
280 /* ADMA2 32-bit descriptor */
281 struct sdhci_adma2_32_desc {
282 __le16 cmd;
283 __le16 len;
284 __le32 addr;
285 } __packed __aligned(4);
287 /* ADMA2 data alignment */
288 #define SDHCI_ADMA2_ALIGN 4
289 #define SDHCI_ADMA2_MASK (SDHCI_ADMA2_ALIGN - 1)
292 * ADMA2 descriptor alignment. Some controllers (e.g. Intel) require 8 byte
293 * alignment for the descriptor table even in 32-bit DMA mode. Memory
294 * allocation is at least 8 byte aligned anyway, so just stipulate 8 always.
296 #define SDHCI_ADMA2_DESC_ALIGN 8
298 /* ADMA2 64-bit DMA descriptor size */
299 #define SDHCI_ADMA2_64_DESC_SZ 12
302 * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte
303 * aligned.
305 struct sdhci_adma2_64_desc {
306 __le16 cmd;
307 __le16 len;
308 __le32 addr_lo;
309 __le32 addr_hi;
310 } __packed __aligned(4);
312 #define ADMA2_TRAN_VALID 0x21
313 #define ADMA2_NOP_END_VALID 0x3
314 #define ADMA2_END 0x2
317 * Maximum segments assuming a 512KiB maximum requisition size and a minimum
318 * 4KiB page size.
320 #define SDHCI_MAX_SEGS 128
322 /* Allow for a a command request and a data request at the same time */
323 #define SDHCI_MAX_MRQS 2
325 enum sdhci_cookie {
326 COOKIE_UNMAPPED,
327 COOKIE_PRE_MAPPED, /* mapped by sdhci_pre_req() */
328 COOKIE_MAPPED, /* mapped by sdhci_prepare_data() */
331 struct sdhci_host {
332 /* Data set by hardware interface driver */
333 const char *hw_name; /* Hardware bus name */
335 unsigned int quirks; /* Deviations from spec. */
337 /* Controller doesn't honor resets unless we touch the clock register */
338 #define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
339 /* Controller has bad caps bits, but really supports DMA */
340 #define SDHCI_QUIRK_FORCE_DMA (1<<1)
341 /* Controller doesn't like to be reset when there is no card inserted. */
342 #define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
343 /* Controller doesn't like clearing the power reg before a change */
344 #define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
345 /* Controller has flaky internal state so reset it on each ios change */
346 #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
347 /* Controller has an unusable DMA engine */
348 #define SDHCI_QUIRK_BROKEN_DMA (1<<5)
349 /* Controller has an unusable ADMA engine */
350 #define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
351 /* Controller can only DMA from 32-bit aligned addresses */
352 #define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
353 /* Controller can only DMA chunk sizes that are a multiple of 32 bits */
354 #define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
355 /* Controller can only ADMA chunks that are a multiple of 32 bits */
356 #define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
357 /* Controller needs to be reset after each request to stay stable */
358 #define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
359 /* Controller needs voltage and power writes to happen separately */
360 #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
361 /* Controller provides an incorrect timeout value for transfers */
362 #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
363 /* Controller has an issue with buffer bits for small transfers */
364 #define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
365 /* Controller does not provide transfer-complete interrupt when not busy */
366 #define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
367 /* Controller has unreliable card detection */
368 #define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
369 /* Controller reports inverted write-protect state */
370 #define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
371 /* Controller does not like fast PIO transfers */
372 #define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
373 /* Controller has to be forced to use block size of 2048 bytes */
374 #define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
375 /* Controller cannot do multi-block transfers */
376 #define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21)
377 /* Controller can only handle 1-bit data transfers */
378 #define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
379 /* Controller needs 10ms delay between applying power and clock */
380 #define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
381 /* Controller uses SDCLK instead of TMCLK for data timeouts */
382 #define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
383 /* Controller reports wrong base clock capability */
384 #define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
385 /* Controller cannot support End Attribute in NOP ADMA descriptor */
386 #define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
387 /* Controller is missing device caps. Use caps provided by host */
388 #define SDHCI_QUIRK_MISSING_CAPS (1<<27)
389 /* Controller uses Auto CMD12 command to stop the transfer */
390 #define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
391 /* Controller doesn't have HISPD bit field in HI-SPEED SD card */
392 #define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
393 /* Controller treats ADMA descriptors with length 0000h incorrectly */
394 #define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30)
395 /* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
396 #define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31)
398 unsigned int quirks2; /* More deviations from spec. */
400 #define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0)
401 #define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1)
402 /* The system physically doesn't support 1.8v, even if the host does */
403 #define SDHCI_QUIRK2_NO_1_8_V (1<<2)
404 #define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3)
405 #define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4)
406 /* Controller has a non-standard host control register */
407 #define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5)
408 /* Controller does not support HS200 */
409 #define SDHCI_QUIRK2_BROKEN_HS200 (1<<6)
410 /* Controller does not support DDR50 */
411 #define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7)
412 /* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
413 #define SDHCI_QUIRK2_STOP_WITH_TC (1<<8)
414 /* Controller does not support 64-bit DMA */
415 #define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9)
416 /* need clear transfer mode register before send cmd */
417 #define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10)
418 /* Capability register bit-63 indicates HS400 support */
419 #define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11)
420 /* forced tuned clock */
421 #define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<12)
422 /* disable the block count for single block transactions */
423 #define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<13)
424 /* Controller broken with using ACMD23 */
425 #define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14)
426 /* Broken Clock divider zero in controller */
427 #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15)
429 int irq; /* Device IRQ */
430 void __iomem *ioaddr; /* Mapped address */
432 const struct sdhci_ops *ops; /* Low level hw interface */
434 /* Internal data */
435 struct mmc_host *mmc; /* MMC structure */
436 struct mmc_host_ops mmc_host_ops; /* MMC host ops */
437 u64 dma_mask; /* custom DMA mask */
439 #if IS_ENABLED(CONFIG_LEDS_CLASS)
440 struct led_classdev led; /* LED control */
441 char led_name[32];
442 #endif
444 spinlock_t lock; /* Mutex */
446 int flags; /* Host attributes */
447 #define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
448 #define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
449 #define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
450 #define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
451 #define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */
452 #define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */
453 #define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */
454 #define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */
455 #define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
456 #define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */
457 #define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */
458 #define SDHCI_SIGNALING_330 (1<<14) /* Host is capable of 3.3V signaling */
459 #define SDHCI_SIGNALING_180 (1<<15) /* Host is capable of 1.8V signaling */
460 #define SDHCI_SIGNALING_120 (1<<16) /* Host is capable of 1.2V signaling */
462 unsigned int version; /* SDHCI spec. version */
464 unsigned int max_clk; /* Max possible freq (MHz) */
465 unsigned int timeout_clk; /* Timeout freq (KHz) */
466 unsigned int clk_mul; /* Clock Muliplier value */
468 unsigned int clock; /* Current clock (MHz) */
469 u8 pwr; /* Current voltage */
471 bool runtime_suspended; /* Host is runtime suspended */
472 bool bus_on; /* Bus power prevents runtime suspend */
473 bool preset_enabled; /* Preset is enabled */
474 bool pending_reset; /* Cmd/data reset is pending */
476 struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */
477 struct mmc_command *cmd; /* Current command */
478 struct mmc_command *data_cmd; /* Current data command */
479 struct mmc_data *data; /* Current data request */
480 unsigned int data_early:1; /* Data finished before cmd */
482 struct sg_mapping_iter sg_miter; /* SG state for PIO */
483 unsigned int blocks; /* remaining PIO blocks */
485 int sg_count; /* Mapped sg entries */
487 void *adma_table; /* ADMA descriptor table */
488 void *align_buffer; /* Bounce buffer */
490 size_t adma_table_sz; /* ADMA descriptor table size */
491 size_t align_buffer_sz; /* Bounce buffer size */
493 dma_addr_t adma_addr; /* Mapped ADMA descr. table */
494 dma_addr_t align_addr; /* Mapped bounce buffer */
496 unsigned int desc_sz; /* ADMA descriptor size */
498 struct tasklet_struct finish_tasklet; /* Tasklet structures */
500 struct timer_list timer; /* Timer for timeouts */
501 struct timer_list data_timer; /* Timer for data timeouts */
503 u32 caps; /* CAPABILITY_0 */
504 u32 caps1; /* CAPABILITY_1 */
505 bool read_caps; /* Capability flags have been read */
507 unsigned int ocr_avail_sdio; /* OCR bit masks */
508 unsigned int ocr_avail_sd;
509 unsigned int ocr_avail_mmc;
510 u32 ocr_mask; /* available voltages */
512 unsigned timing; /* Current timing */
514 u32 thread_isr;
516 /* cached registers */
517 u32 ier;
519 wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */
520 unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */
522 unsigned int tuning_count; /* Timer count for re-tuning */
523 unsigned int tuning_mode; /* Re-tuning mode supported by host */
524 #define SDHCI_TUNING_MODE_1 0
525 #define SDHCI_TUNING_MODE_2 1
526 #define SDHCI_TUNING_MODE_3 2
528 unsigned long private[0] ____cacheline_aligned;
531 struct sdhci_ops {
532 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
533 u32 (*read_l)(struct sdhci_host *host, int reg);
534 u16 (*read_w)(struct sdhci_host *host, int reg);
535 u8 (*read_b)(struct sdhci_host *host, int reg);
536 void (*write_l)(struct sdhci_host *host, u32 val, int reg);
537 void (*write_w)(struct sdhci_host *host, u16 val, int reg);
538 void (*write_b)(struct sdhci_host *host, u8 val, int reg);
539 #endif
541 void (*set_clock)(struct sdhci_host *host, unsigned int clock);
542 void (*set_power)(struct sdhci_host *host, unsigned char mode,
543 unsigned short vdd);
545 int (*enable_dma)(struct sdhci_host *host);
546 unsigned int (*get_max_clock)(struct sdhci_host *host);
547 unsigned int (*get_min_clock)(struct sdhci_host *host);
548 unsigned int (*get_timeout_clock)(struct sdhci_host *host);
549 unsigned int (*get_max_timeout_count)(struct sdhci_host *host);
550 void (*set_timeout)(struct sdhci_host *host,
551 struct mmc_command *cmd);
552 void (*set_bus_width)(struct sdhci_host *host, int width);
553 void (*platform_send_init_74_clocks)(struct sdhci_host *host,
554 u8 power_mode);
555 unsigned int (*get_ro)(struct sdhci_host *host);
556 void (*reset)(struct sdhci_host *host, u8 mask);
557 int (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode);
558 void (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
559 void (*hw_reset)(struct sdhci_host *host);
560 void (*adma_workaround)(struct sdhci_host *host, u32 intmask);
561 void (*card_event)(struct sdhci_host *host);
562 void (*voltage_switch)(struct sdhci_host *host);
563 int (*select_drive_strength)(struct sdhci_host *host,
564 struct mmc_card *card,
565 unsigned int max_dtr, int host_drv,
566 int card_drv, int *drv_type);
569 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
571 static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
573 if (unlikely(host->ops->write_l))
574 host->ops->write_l(host, val, reg);
575 else
576 writel(val, host->ioaddr + reg);
579 static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
581 if (unlikely(host->ops->write_w))
582 host->ops->write_w(host, val, reg);
583 else
584 writew(val, host->ioaddr + reg);
587 static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
589 if (unlikely(host->ops->write_b))
590 host->ops->write_b(host, val, reg);
591 else
592 writeb(val, host->ioaddr + reg);
595 static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
597 if (unlikely(host->ops->read_l))
598 return host->ops->read_l(host, reg);
599 else
600 return readl(host->ioaddr + reg);
603 static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
605 if (unlikely(host->ops->read_w))
606 return host->ops->read_w(host, reg);
607 else
608 return readw(host->ioaddr + reg);
611 static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
613 if (unlikely(host->ops->read_b))
614 return host->ops->read_b(host, reg);
615 else
616 return readb(host->ioaddr + reg);
619 #else
621 static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
623 writel(val, host->ioaddr + reg);
626 static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
628 writew(val, host->ioaddr + reg);
631 static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
633 writeb(val, host->ioaddr + reg);
636 static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
638 return readl(host->ioaddr + reg);
641 static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
643 return readw(host->ioaddr + reg);
646 static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
648 return readb(host->ioaddr + reg);
651 #endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */
653 extern struct sdhci_host *sdhci_alloc_host(struct device *dev,
654 size_t priv_size);
655 extern void sdhci_free_host(struct sdhci_host *host);
657 static inline void *sdhci_priv(struct sdhci_host *host)
659 return host->private;
662 extern void sdhci_card_detect(struct sdhci_host *host);
663 extern void __sdhci_read_caps(struct sdhci_host *host, u16 *ver, u32 *caps,
664 u32 *caps1);
665 extern int sdhci_setup_host(struct sdhci_host *host);
666 extern int __sdhci_add_host(struct sdhci_host *host);
667 extern int sdhci_add_host(struct sdhci_host *host);
668 extern void sdhci_remove_host(struct sdhci_host *host, int dead);
669 extern void sdhci_send_command(struct sdhci_host *host,
670 struct mmc_command *cmd);
672 static inline void sdhci_read_caps(struct sdhci_host *host)
674 __sdhci_read_caps(host, NULL, NULL, NULL);
677 static inline bool sdhci_sdio_irq_enabled(struct sdhci_host *host)
679 return !!(host->flags & SDHCI_SDIO_IRQ_ENABLED);
682 u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
683 unsigned int *actual_clock);
684 void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
685 void sdhci_enable_clk(struct sdhci_host *host, u16 clk);
686 void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
687 unsigned short vdd);
688 void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
689 unsigned short vdd);
690 void sdhci_set_bus_width(struct sdhci_host *host, int width);
691 void sdhci_reset(struct sdhci_host *host, u8 mask);
692 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
693 int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
695 #ifdef CONFIG_PM
696 extern int sdhci_suspend_host(struct sdhci_host *host);
697 extern int sdhci_resume_host(struct sdhci_host *host);
698 extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
699 extern int sdhci_runtime_suspend_host(struct sdhci_host *host);
700 extern int sdhci_runtime_resume_host(struct sdhci_host *host);
701 #endif
703 #endif /* __SDHCI_HW_H */