?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / tty / serial / sccnxp.c
blobfcf803ffad1931c45ee297d862209f3b09ae76d2
1 /*
2 * NXP (Philips) SCC+++(SCN+++) serial driver
3 *
4 * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
5 *
6 * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de)
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 */
13
14 #if defined(CONFIG_SERIAL_SCCNXP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
15 #define SUPPORT_SYSRQ
16 #endif
17
18 #include <linux/clk.h>
19 #include <linux/err.h>
20 #include <linux/module.h>
21 #include <linux/device.h>
22 #include <linux/console.h>
23 #include <linux/serial_core.h>
24 #include <linux/serial.h>
25 #include <linux/io.h>
26 #include <linux/tty.h>
27 #include <linux/tty_flip.h>
28 #include <linux/spinlock.h>
29 #include <linux/platform_device.h>
30 #include <linux/platform_data/serial-sccnxp.h>
31 #include <linux/regulator/consumer.h>
32
33 #define SCCNXP_NAME "uart-sccnxp"
34 #define SCCNXP_MAJOR 204
35 #define SCCNXP_MINOR 205
36
37 #define SCCNXP_MR_REG (0x00)
38 # define MR0_BAUD_NORMAL (0 << 0)
39 # define MR0_BAUD_EXT1 (1 << 0)
40 # define MR0_BAUD_EXT2 (5 << 0)
41 # define MR0_FIFO (1 << 3)
42 # define MR0_TXLVL (1 << 4)
43 # define MR1_BITS_5 (0 << 0)
44 # define MR1_BITS_6 (1 << 0)
45 # define MR1_BITS_7 (2 << 0)
46 # define MR1_BITS_8 (3 << 0)
47 # define MR1_PAR_EVN (0 << 2)
48 # define MR1_PAR_ODD (1 << 2)
49 # define MR1_PAR_NO (4 << 2)
50 # define MR2_STOP1 (7 << 0)
51 # define MR2_STOP2 (0xf << 0)
52 #define SCCNXP_SR_REG (0x01)
53 #define SCCNXP_CSR_REG SCCNXP_SR_REG
54 # define SR_RXRDY (1 << 0)
55 # define SR_FULL (1 << 1)
56 # define SR_TXRDY (1 << 2)
57 # define SR_TXEMT (1 << 3)
58 # define SR_OVR (1 << 4)
59 # define SR_PE (1 << 5)
60 # define SR_FE (1 << 6)
61 # define SR_BRK (1 << 7)
62 #define SCCNXP_CR_REG (0x02)
63 # define CR_RX_ENABLE (1 << 0)
64 # define CR_RX_DISABLE (1 << 1)
65 # define CR_TX_ENABLE (1 << 2)
66 # define CR_TX_DISABLE (1 << 3)
67 # define CR_CMD_MRPTR1 (0x01 << 4)
68 # define CR_CMD_RX_RESET (0x02 << 4)
69 # define CR_CMD_TX_RESET (0x03 << 4)
70 # define CR_CMD_STATUS_RESET (0x04 << 4)
71 # define CR_CMD_BREAK_RESET (0x05 << 4)
72 # define CR_CMD_START_BREAK (0x06 << 4)
73 # define CR_CMD_STOP_BREAK (0x07 << 4)
74 # define CR_CMD_MRPTR0 (0x0b << 4)
75 #define SCCNXP_RHR_REG (0x03)
76 #define SCCNXP_THR_REG SCCNXP_RHR_REG
77 #define SCCNXP_IPCR_REG (0x04)
78 #define SCCNXP_ACR_REG SCCNXP_IPCR_REG
79 # define ACR_BAUD0 (0 << 7)
80 # define ACR_BAUD1 (1 << 7)
81 # define ACR_TIMER_MODE (6 << 4)
82 #define SCCNXP_ISR_REG (0x05)
83 #define SCCNXP_IMR_REG SCCNXP_ISR_REG
84 # define IMR_TXRDY (1 << 0)
85 # define IMR_RXRDY (1 << 1)
86 # define ISR_TXRDY(x) (1 << ((x * 4) + 0))
87 # define ISR_RXRDY(x) (1 << ((x * 4) + 1))
88 #define SCCNXP_IPR_REG (0x0d)
89 #define SCCNXP_OPCR_REG SCCNXP_IPR_REG
90 #define SCCNXP_SOP_REG (0x0e)
91 #define SCCNXP_ROP_REG (0x0f)
92
93 /* Route helpers */
94 #define MCTRL_MASK(sig) (0xf << (sig))
95 #define MCTRL_IBIT(cfg, sig) ((((cfg) >> (sig)) & 0xf) - LINE_IP0)
96 #define MCTRL_OBIT(cfg, sig) ((((cfg) >> (sig)) & 0xf) - LINE_OP0)
97
98 #define SCCNXP_HAVE_IO 0x00000001
99 #define SCCNXP_HAVE_MR0 0x00000002
100
101 struct sccnxp_chip {
102 const char *name;
103 unsigned int nr;
104 unsigned long freq_min;
105 unsigned long freq_std;
106 unsigned long freq_max;
107 unsigned int flags;
108 unsigned int fifosize;
109 };
110
111 struct sccnxp_port {
112 struct uart_driver uart;
113 struct uart_port port[SCCNXP_MAX_UARTS];
114 bool opened[SCCNXP_MAX_UARTS];
115
116 int irq;
117 u8 imr;
118
119 struct sccnxp_chip *chip;
120
121 #ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
122 struct console console;
123 #endif
124
125 spinlock_t lock;
126
127 bool poll;
128 struct timer_list timer;
129
130 struct sccnxp_pdata pdata;
131
132 struct regulator *regulator;
133 };
134
135 static const struct sccnxp_chip sc2681 = {
136 .name = "SC2681",
137 .nr = 2,
138 .freq_min = 1000000,
139 .freq_std = 3686400,
140 .freq_max = 4000000,
141 .flags = SCCNXP_HAVE_IO,
142 .fifosize = 3,
143 };
144
145 static const struct sccnxp_chip sc2691 = {
146 .name = "SC2691",
147 .nr = 1,
148 .freq_min = 1000000,
149 .freq_std = 3686400,
150 .freq_max = 4000000,
151 .flags = 0,
152 .fifosize = 3,
153 };
154
155 static const struct sccnxp_chip sc2692 = {
156 .name = "SC2692",
157 .nr = 2,
158 .freq_min = 1000000,
159 .freq_std = 3686400,
160 .freq_max = 4000000,
161 .flags = SCCNXP_HAVE_IO,
162 .fifosize = 3,
163 };
164
165 static const struct sccnxp_chip sc2891 = {
166 .name = "SC2891",
167 .nr = 1,
168 .freq_min = 100000,
169 .freq_std = 3686400,
170 .freq_max = 8000000,
171 .flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0,
172 .fifosize = 16,
173 };
174
175 static const struct sccnxp_chip sc2892 = {
176 .name = "SC2892",
177 .nr = 2,
178 .freq_min = 100000,
179 .freq_std = 3686400,
180 .freq_max = 8000000,
181 .flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0,
182 .fifosize = 16,
183 };
184
185 static const struct sccnxp_chip sc28202 = {
186 .name = "SC28202",
187 .nr = 2,
188 .freq_min = 1000000,
189 .freq_std = 14745600,
190 .freq_max = 50000000,
191 .flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0,
192 .fifosize = 256,
193 };
194
195 static const struct sccnxp_chip sc68681 = {
196 .name = "SC68681",
197 .nr = 2,
198 .freq_min = 1000000,
199 .freq_std = 3686400,
200 .freq_max = 4000000,
201 .flags = SCCNXP_HAVE_IO,
202 .fifosize = 3,
203 };
204
205 static const struct sccnxp_chip sc68692 = {
206 .name = "SC68692",
207 .nr = 2,
208 .freq_min = 1000000,
209 .freq_std = 3686400,
210 .freq_max = 4000000,
211 .flags = SCCNXP_HAVE_IO,
212 .fifosize = 3,
213 };
214
215 static inline u8 sccnxp_read(struct uart_port *port, u8 reg)
216 {
217 return readb(port->membase + (reg << port->regshift));
218 }
219
220 static inline void sccnxp_write(struct uart_port *port, u8 reg, u8 v)
221 {
222 writeb(v, port->membase + (reg << port->regshift));
223 }
224
225 static inline u8 sccnxp_port_read(struct uart_port *port, u8 reg)
226 {
227 return sccnxp_read(port, (port->line << 3) + reg);
228 }
229
230 static inline void sccnxp_port_write(struct uart_port *port, u8 reg, u8 v)
231 {
232 sccnxp_write(port, (port->line << 3) + reg, v);
233 }
234
235 static int sccnxp_update_best_err(int a, int b, int *besterr)
236 {
237 int err = abs(a - b);
238
239 if ((*besterr < 0) || (*besterr > err)) {
240 *besterr = err;
241 return 0;
242 }
243
244 return 1;
245 }
246
247 static const struct {
248 u8 csr;
249 u8 acr;
250 u8 mr0;
251 int baud;
252 } baud_std[] = {
253 { 0, ACR_BAUD0, MR0_BAUD_NORMAL, 50, },
254 { 0, ACR_BAUD1, MR0_BAUD_NORMAL, 75, },
255 { 1, ACR_BAUD0, MR0_BAUD_NORMAL, 110, },
256 { 2, ACR_BAUD0, MR0_BAUD_NORMAL, 134, },
257 { 3, ACR_BAUD1, MR0_BAUD_NORMAL, 150, },
258 { 3, ACR_BAUD0, MR0_BAUD_NORMAL, 200, },
259 { 4, ACR_BAUD0, MR0_BAUD_NORMAL, 300, },
260 { 0, ACR_BAUD1, MR0_BAUD_EXT1, 450, },
261 { 1, ACR_BAUD0, MR0_BAUD_EXT2, 880, },
262 { 3, ACR_BAUD1, MR0_BAUD_EXT1, 900, },
263 { 5, ACR_BAUD0, MR0_BAUD_NORMAL, 600, },
264 { 7, ACR_BAUD0, MR0_BAUD_NORMAL, 1050, },
265 { 2, ACR_BAUD0, MR0_BAUD_EXT2, 1076, },
266 { 6, ACR_BAUD0, MR0_BAUD_NORMAL, 1200, },
267 { 10, ACR_BAUD1, MR0_BAUD_NORMAL, 1800, },
268 { 7, ACR_BAUD1, MR0_BAUD_NORMAL, 2000, },
269 { 8, ACR_BAUD0, MR0_BAUD_NORMAL, 2400, },
270 { 5, ACR_BAUD1, MR0_BAUD_EXT1, 3600, },
271 { 9, ACR_BAUD0, MR0_BAUD_NORMAL, 4800, },
272 { 10, ACR_BAUD0, MR0_BAUD_NORMAL, 7200, },
273 { 11, ACR_BAUD0, MR0_BAUD_NORMAL, 9600, },
274 { 8, ACR_BAUD0, MR0_BAUD_EXT1, 14400, },
275 { 12, ACR_BAUD1, MR0_BAUD_NORMAL, 19200, },
276 { 9, ACR_BAUD0, MR0_BAUD_EXT1, 28800, },
277 { 12, ACR_BAUD0, MR0_BAUD_NORMAL, 38400, },
278 { 11, ACR_BAUD0, MR0_BAUD_EXT1, 57600, },
279 { 12, ACR_BAUD1, MR0_BAUD_EXT1, 115200, },
280 { 12, ACR_BAUD0, MR0_BAUD_EXT1, 230400, },
281 { 0, 0, 0, 0 }
282 };
283
284 static int sccnxp_set_baud(struct uart_port *port, int baud)
285 {
286 struct sccnxp_port *s = dev_get_drvdata(port->dev);
287 int div_std, tmp_baud, bestbaud = baud, besterr = -1;
288 struct sccnxp_chip *chip = s->chip;
289 u8 i, acr = 0, csr = 0, mr0 = 0;
290
291 /* Find best baud from table */
292 for (i = 0; baud_std[i].baud && besterr; i++) {
293 if (baud_std[i].mr0 && !(chip->flags & SCCNXP_HAVE_MR0))
294 continue;
295 div_std = DIV_ROUND_CLOSEST(chip->freq_std, baud_std[i].baud);
296 tmp_baud = DIV_ROUND_CLOSEST(port->uartclk, div_std);
297 if (!sccnxp_update_best_err(baud, tmp_baud, &besterr)) {
298 acr = baud_std[i].acr;
299 csr = baud_std[i].csr;
300 mr0 = baud_std[i].mr0;
301 bestbaud = tmp_baud;
302 }
303 }
304
305 if (chip->flags & SCCNXP_HAVE_MR0) {
306 /* Enable FIFO, set half level for TX */
307 mr0 |= MR0_FIFO | MR0_TXLVL;
308 /* Update MR0 */
309 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_MRPTR0);
310 sccnxp_port_write(port, SCCNXP_MR_REG, mr0);
311 }
312
313 sccnxp_port_write(port, SCCNXP_ACR_REG, acr | ACR_TIMER_MODE);
314 sccnxp_port_write(port, SCCNXP_CSR_REG, (csr << 4) | csr);
315
316 if (baud != bestbaud)
317 dev_dbg(port->dev, "Baudrate desired: %i, calculated: %i\n",
318 baud, bestbaud);
319
320 return bestbaud;
321 }
322
323 static void sccnxp_enable_irq(struct uart_port *port, int mask)
324 {
325 struct sccnxp_port *s = dev_get_drvdata(port->dev);
326
327 s->imr |= mask << (port->line * 4);
328 sccnxp_write(port, SCCNXP_IMR_REG, s->imr);
329 }
330
331 static void sccnxp_disable_irq(struct uart_port *port, int mask)
332 {
333 struct sccnxp_port *s = dev_get_drvdata(port->dev);
334
335 s->imr &= ~(mask << (port->line * 4));
336 sccnxp_write(port, SCCNXP_IMR_REG, s->imr);
337 }
338
339 static void sccnxp_set_bit(struct uart_port *port, int sig, int state)
340 {
341 u8 bitmask;
342 struct sccnxp_port *s = dev_get_drvdata(port->dev);
343
344 if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(sig)) {
345 bitmask = 1 << MCTRL_OBIT(s->pdata.mctrl_cfg[port->line], sig);
346 if (state)
347 sccnxp_write(port, SCCNXP_SOP_REG, bitmask);
348 else
349 sccnxp_write(port, SCCNXP_ROP_REG, bitmask);
350 }
351 }
352
353 static void sccnxp_handle_rx(struct uart_port *port)
354 {
355 u8 sr;
356 unsigned int ch, flag;
357
358 for (;;) {
359 sr = sccnxp_port_read(port, SCCNXP_SR_REG);
360 if (!(sr & SR_RXRDY))
361 break;
362 sr &= SR_PE | SR_FE | SR_OVR | SR_BRK;
363
364 ch = sccnxp_port_read(port, SCCNXP_RHR_REG);
365
366 port->icount.rx++;
367 flag = TTY_NORMAL;
368
369 if (unlikely(sr)) {
370 if (sr & SR_BRK) {
371 port->icount.brk++;
372 sccnxp_port_write(port, SCCNXP_CR_REG,
373 CR_CMD_BREAK_RESET);
374 if (uart_handle_break(port))
375 continue;
376 } else if (sr & SR_PE)
377 port->icount.parity++;
378 else if (sr & SR_FE)
379 port->icount.frame++;
380 else if (sr & SR_OVR) {
381 port->icount.overrun++;
382 sccnxp_port_write(port, SCCNXP_CR_REG,
383 CR_CMD_STATUS_RESET);
384 }
385
386 sr &= port->read_status_mask;
387 if (sr & SR_BRK)
388 flag = TTY_BREAK;
389 else if (sr & SR_PE)
390 flag = TTY_PARITY;
391 else if (sr & SR_FE)
392 flag = TTY_FRAME;
393 else if (sr & SR_OVR)
394 flag = TTY_OVERRUN;
395 }
396
397 if (uart_handle_sysrq_char(port, ch))
398 continue;
399
400 if (sr & port->ignore_status_mask)
401 continue;
402
403 uart_insert_char(port, sr, SR_OVR, ch, flag);
404 }
405
406 tty_flip_buffer_push(&port->state->port);
407 }
408
409 static void sccnxp_handle_tx(struct uart_port *port)
410 {
411 u8 sr;
412 struct circ_buf *xmit = &port->state->xmit;
413 struct sccnxp_port *s = dev_get_drvdata(port->dev);
414
415 if (unlikely(port->x_char)) {
416 sccnxp_port_write(port, SCCNXP_THR_REG, port->x_char);
417 port->icount.tx++;
418 port->x_char = 0;
419 return;
420 }
421
422 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
423 /* Disable TX if FIFO is empty */
424 if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXEMT) {
425 sccnxp_disable_irq(port, IMR_TXRDY);
426
427 /* Set direction to input */
428 if (s->chip->flags & SCCNXP_HAVE_IO)
429 sccnxp_set_bit(port, DIR_OP, 0);
430 }
431 return;
432 }
433
434 while (!uart_circ_empty(xmit)) {
435 sr = sccnxp_port_read(port, SCCNXP_SR_REG);
436 if (!(sr & SR_TXRDY))
437 break;
438
439 sccnxp_port_write(port, SCCNXP_THR_REG, xmit->buf[xmit->tail]);
440 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
441 port->icount.tx++;
442 }
443
444 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
445 uart_write_wakeup(port);
446 }
447
448 static void sccnxp_handle_events(struct sccnxp_port *s)
449 {
450 int i;
451 u8 isr;
452
453 do {
454 isr = sccnxp_read(&s->port[0], SCCNXP_ISR_REG);
455 isr &= s->imr;
456 if (!isr)
457 break;
458
459 for (i = 0; i < s->uart.nr; i++) {
460 if (s->opened[i] && (isr & ISR_RXRDY(i)))
461 sccnxp_handle_rx(&s->port[i]);
462 if (s->opened[i] && (isr & ISR_TXRDY(i)))
463 sccnxp_handle_tx(&s->port[i]);
464 }
465 } while (1);
466 }
467
468 static void sccnxp_timer(unsigned long data)
469 {
470 struct sccnxp_port *s = (struct sccnxp_port *)data;
471 unsigned long flags;
472
473 spin_lock_irqsave(&s->lock, flags);
474 sccnxp_handle_events(s);
475 spin_unlock_irqrestore(&s->lock, flags);
476
477 mod_timer(&s->timer, jiffies + usecs_to_jiffies(s->pdata.poll_time_us));
478 }
479
480 static irqreturn_t sccnxp_ist(int irq, void *dev_id)
481 {
482 struct sccnxp_port *s = (struct sccnxp_port *)dev_id;
483 unsigned long flags;
484
485 spin_lock_irqsave(&s->lock, flags);
486 sccnxp_handle_events(s);
487 spin_unlock_irqrestore(&s->lock, flags);
488
489 return IRQ_HANDLED;
490 }
491
492 static void sccnxp_start_tx(struct uart_port *port)
493 {
494 struct sccnxp_port *s = dev_get_drvdata(port->dev);
495 unsigned long flags;
496
497 spin_lock_irqsave(&s->lock, flags);
498
499 /* Set direction to output */
500 if (s->chip->flags & SCCNXP_HAVE_IO)
501 sccnxp_set_bit(port, DIR_OP, 1);
502
503 sccnxp_enable_irq(port, IMR_TXRDY);
504
505 spin_unlock_irqrestore(&s->lock, flags);
506 }
507
508 static void sccnxp_stop_tx(struct uart_port *port)
509 {
510 /* Do nothing */
511 }
512
513 static void sccnxp_stop_rx(struct uart_port *port)
514 {
515 struct sccnxp_port *s = dev_get_drvdata(port->dev);
516 unsigned long flags;
517
518 spin_lock_irqsave(&s->lock, flags);
519 sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE);
520 spin_unlock_irqrestore(&s->lock, flags);
521 }
522
523 static unsigned int sccnxp_tx_empty(struct uart_port *port)
524 {
525 u8 val;
526 unsigned long flags;
527 struct sccnxp_port *s = dev_get_drvdata(port->dev);
528
529 spin_lock_irqsave(&s->lock, flags);
530 val = sccnxp_port_read(port, SCCNXP_SR_REG);
531 spin_unlock_irqrestore(&s->lock, flags);
532
533 return (val & SR_TXEMT) ? TIOCSER_TEMT : 0;
534 }
535
536 static void sccnxp_set_mctrl(struct uart_port *port, unsigned int mctrl)
537 {
538 struct sccnxp_port *s = dev_get_drvdata(port->dev);
539 unsigned long flags;
540
541 if (!(s->chip->flags & SCCNXP_HAVE_IO))
542 return;
543
544 spin_lock_irqsave(&s->lock, flags);
545
546 sccnxp_set_bit(port, DTR_OP, mctrl & TIOCM_DTR);
547 sccnxp_set_bit(port, RTS_OP, mctrl & TIOCM_RTS);
548
549 spin_unlock_irqrestore(&s->lock, flags);
550 }
551
552 static unsigned int sccnxp_get_mctrl(struct uart_port *port)
553 {
554 u8 bitmask, ipr;
555 unsigned long flags;
556 struct sccnxp_port *s = dev_get_drvdata(port->dev);
557 unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
558
559 if (!(s->chip->flags & SCCNXP_HAVE_IO))
560 return mctrl;
561
562 spin_lock_irqsave(&s->lock, flags);
563
564 ipr = ~sccnxp_read(port, SCCNXP_IPCR_REG);
565
566 if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(DSR_IP)) {
567 bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
568 DSR_IP);
569 mctrl &= ~TIOCM_DSR;
570 mctrl |= (ipr & bitmask) ? TIOCM_DSR : 0;
571 }
572 if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(CTS_IP)) {
573 bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
574 CTS_IP);
575 mctrl &= ~TIOCM_CTS;
576 mctrl |= (ipr & bitmask) ? TIOCM_CTS : 0;
577 }
578 if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(DCD_IP)) {
579 bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
580 DCD_IP);
581 mctrl &= ~TIOCM_CAR;
582 mctrl |= (ipr & bitmask) ? TIOCM_CAR : 0;
583 }
584 if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(RNG_IP)) {
585 bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
586 RNG_IP);
587 mctrl &= ~TIOCM_RNG;
588 mctrl |= (ipr & bitmask) ? TIOCM_RNG : 0;
589 }
590
591 spin_unlock_irqrestore(&s->lock, flags);
592
593 return mctrl;
594 }
595
596 static void sccnxp_break_ctl(struct uart_port *port, int break_state)
597 {
598 struct sccnxp_port *s = dev_get_drvdata(port->dev);
599 unsigned long flags;
600
601 spin_lock_irqsave(&s->lock, flags);
602 sccnxp_port_write(port, SCCNXP_CR_REG, break_state ?
603 CR_CMD_START_BREAK : CR_CMD_STOP_BREAK);
604 spin_unlock_irqrestore(&s->lock, flags);
605 }
606
607 static void sccnxp_set_termios(struct uart_port *port,
608 struct ktermios *termios, struct ktermios *old)
609 {
610 struct sccnxp_port *s = dev_get_drvdata(port->dev);
611 unsigned long flags;
612 u8 mr1, mr2;
613 int baud;
614
615 spin_lock_irqsave(&s->lock, flags);
616
617 /* Mask termios capabilities we don't support */
618 termios->c_cflag &= ~CMSPAR;
619
620 /* Disable RX & TX, reset break condition, status and FIFOs */
621 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_RX_RESET |
622 CR_RX_DISABLE | CR_TX_DISABLE);
623 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_TX_RESET);
624 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_STATUS_RESET);
625 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_BREAK_RESET);
626
627 /* Word size */
628 switch (termios->c_cflag & CSIZE) {
629 case CS5:
630 mr1 = MR1_BITS_5;
631 break;
632 case CS6:
633 mr1 = MR1_BITS_6;
634 break;
635 case CS7:
636 mr1 = MR1_BITS_7;
637 break;
638 case CS8:
639 default:
640 mr1 = MR1_BITS_8;
641 break;
642 }
643
644 /* Parity */
645 if (termios->c_cflag & PARENB) {
646 if (termios->c_cflag & PARODD)
647 mr1 |= MR1_PAR_ODD;
648 } else
649 mr1 |= MR1_PAR_NO;
650
651 /* Stop bits */
652 mr2 = (termios->c_cflag & CSTOPB) ? MR2_STOP2 : MR2_STOP1;
653
654 /* Update desired format */
655 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_MRPTR1);
656 sccnxp_port_write(port, SCCNXP_MR_REG, mr1);
657 sccnxp_port_write(port, SCCNXP_MR_REG, mr2);
658
659 /* Set read status mask */
660 port->read_status_mask = SR_OVR;
661 if (termios->c_iflag & INPCK)
662 port->read_status_mask |= SR_PE | SR_FE;
663 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
664 port->read_status_mask |= SR_BRK;
665
666 /* Set status ignore mask */
667 port->ignore_status_mask = 0;
668 if (termios->c_iflag & IGNBRK)
669 port->ignore_status_mask |= SR_BRK;
670 if (termios->c_iflag & IGNPAR)
671 port->ignore_status_mask |= SR_PE;
672 if (!(termios->c_cflag & CREAD))
673 port->ignore_status_mask |= SR_PE | SR_OVR | SR_FE | SR_BRK;
674
675 /* Setup baudrate */
676 baud = uart_get_baud_rate(port, termios, old, 50,
677 (s->chip->flags & SCCNXP_HAVE_MR0) ?
678 230400 : 38400);
679 baud = sccnxp_set_baud(port, baud);
680
681 /* Update timeout according to new baud rate */
682 uart_update_timeout(port, termios->c_cflag, baud);
683
684 /* Report actual baudrate back to core */
685 if (tty_termios_baud_rate(termios))
686 tty_termios_encode_baud_rate(termios, baud, baud);
687
688 /* Enable RX & TX */
689 sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE);
690
691 spin_unlock_irqrestore(&s->lock, flags);
692 }
693
694 static int sccnxp_startup(struct uart_port *port)
695 {
696 struct sccnxp_port *s = dev_get_drvdata(port->dev);
697 unsigned long flags;
698
699 spin_lock_irqsave(&s->lock, flags);
700
701 if (s->chip->flags & SCCNXP_HAVE_IO) {
702 /* Outputs are controlled manually */
703 sccnxp_write(port, SCCNXP_OPCR_REG, 0);
704 }
705
706 /* Reset break condition, status and FIFOs */
707 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_RX_RESET);
708 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_TX_RESET);
709 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_STATUS_RESET);
710 sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_BREAK_RESET);
711
712 /* Enable RX & TX */
713 sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE);
714
715 /* Enable RX interrupt */
716 sccnxp_enable_irq(port, IMR_RXRDY);
717
718 s->opened[port->line] = 1;
719
720 spin_unlock_irqrestore(&s->lock, flags);
721
722 return 0;
723 }
724
725 static void sccnxp_shutdown(struct uart_port *port)
726 {
727 struct sccnxp_port *s = dev_get_drvdata(port->dev);
728 unsigned long flags;
729
730 spin_lock_irqsave(&s->lock, flags);
731
732 s->opened[port->line] = 0;
733
734 /* Disable interrupts */
735 sccnxp_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
736
737 /* Disable TX & RX */
738 sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE | CR_TX_DISABLE);
739
740 /* Leave direction to input */
741 if (s->chip->flags & SCCNXP_HAVE_IO)
742 sccnxp_set_bit(port, DIR_OP, 0);
743
744 spin_unlock_irqrestore(&s->lock, flags);
745 }
746
747 static const char *sccnxp_type(struct uart_port *port)
748 {
749 struct sccnxp_port *s = dev_get_drvdata(port->dev);
750
751 return (port->type == PORT_SC26XX) ? s->chip->name : NULL;
752 }
753
754 static void sccnxp_release_port(struct uart_port *port)
755 {
756 /* Do nothing */
757 }
758
759 static int sccnxp_request_port(struct uart_port *port)
760 {
761 /* Do nothing */
762 return 0;
763 }
764
765 static void sccnxp_config_port(struct uart_port *port, int flags)
766 {
767 if (flags & UART_CONFIG_TYPE)
768 port->type = PORT_SC26XX;
769 }
770
771 static int sccnxp_verify_port(struct uart_port *port, struct serial_struct *s)
772 {
773 if ((s->type == PORT_UNKNOWN) || (s->type == PORT_SC26XX))
774 return 0;
775 if (s->irq == port->irq)
776 return 0;
777
778 return -EINVAL;
779 }
780
781 static const struct uart_ops sccnxp_ops = {
782 .tx_empty = sccnxp_tx_empty,
783 .set_mctrl = sccnxp_set_mctrl,
784 .get_mctrl = sccnxp_get_mctrl,
785 .stop_tx = sccnxp_stop_tx,
786 .start_tx = sccnxp_start_tx,
787 .stop_rx = sccnxp_stop_rx,
788 .break_ctl = sccnxp_break_ctl,
789 .startup = sccnxp_startup,
790 .shutdown = sccnxp_shutdown,
791 .set_termios = sccnxp_set_termios,
792 .type = sccnxp_type,
793 .release_port = sccnxp_release_port,
794 .request_port = sccnxp_request_port,
795 .config_port = sccnxp_config_port,
796 .verify_port = sccnxp_verify_port,
797 };
798
799 #ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
800 static void sccnxp_console_putchar(struct uart_port *port, int c)
801 {
802 int tryes = 100000;
803
804 while (tryes--) {
805 if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXRDY) {
806 sccnxp_port_write(port, SCCNXP_THR_REG, c);
807 break;
808 }
809 barrier();
810 }
811 }
812
813 static void sccnxp_console_write(struct console *co, const char *c, unsigned n)
814 {
815 struct sccnxp_port *s = (struct sccnxp_port *)co->data;
816 struct uart_port *port = &s->port[co->index];
817 unsigned long flags;
818
819 spin_lock_irqsave(&s->lock, flags);
820 uart_console_write(port, c, n, sccnxp_console_putchar);
821 spin_unlock_irqrestore(&s->lock, flags);
822 }
823
824 static int sccnxp_console_setup(struct console *co, char *options)
825 {
826 struct sccnxp_port *s = (struct sccnxp_port *)co->data;
827 struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0];
828 int baud = 9600, bits = 8, parity = 'n', flow = 'n';
829
830 if (options)
831 uart_parse_options(options, &baud, &parity, &bits, &flow);
832
833 return uart_set_options(port, co, baud, parity, bits, flow);
834 }
835 #endif
836
837 static const struct platform_device_id sccnxp_id_table[] = {
838 { .name = "sc2681", .driver_data = (kernel_ulong_t)&sc2681, },
839 { .name = "sc2691", .driver_data = (kernel_ulong_t)&sc2691, },
840 { .name = "sc2692", .driver_data = (kernel_ulong_t)&sc2692, },
841 { .name = "sc2891", .driver_data = (kernel_ulong_t)&sc2891, },
842 { .name = "sc2892", .driver_data = (kernel_ulong_t)&sc2892, },
843 { .name = "sc28202", .driver_data = (kernel_ulong_t)&sc28202, },
844 { .name = "sc68681", .driver_data = (kernel_ulong_t)&sc68681, },
845 { .name = "sc68692", .driver_data = (kernel_ulong_t)&sc68692, },
846 { }
847 };
848 MODULE_DEVICE_TABLE(platform, sccnxp_id_table);
849
850 static int sccnxp_probe(struct platform_device *pdev)
851 {
852 struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
853 struct sccnxp_pdata *pdata = dev_get_platdata(&pdev->dev);
854 int i, ret, uartclk;
855 struct sccnxp_port *s;
856 void __iomem *membase;
857 struct clk *clk;
858
859 membase = devm_ioremap_resource(&pdev->dev, res);
860 if (IS_ERR(membase))
861 return PTR_ERR(membase);
862
863 s = devm_kzalloc(&pdev->dev, sizeof(struct sccnxp_port), GFP_KERNEL);
864 if (!s) {
865 dev_err(&pdev->dev, "Error allocating port structure\n");
866 return -ENOMEM;
867 }
868 platform_set_drvdata(pdev, s);
869
870 spin_lock_init(&s->lock);
871
872 s->chip = (struct sccnxp_chip *)pdev->id_entry->driver_data;
873
874 s->regulator = devm_regulator_get(&pdev->dev, "vcc");
875 if (!IS_ERR(s->regulator)) {
876 ret = regulator_enable(s->regulator);
877 if (ret) {
878 dev_err(&pdev->dev,
879 "Failed to enable regulator: %i\n", ret);
880 return ret;
881 }
882 } else if (PTR_ERR(s->regulator) == -EPROBE_DEFER)
883 return -EPROBE_DEFER;
884
885 clk = devm_clk_get(&pdev->dev, NULL);
886 if (IS_ERR(clk)) {
887 if (PTR_ERR(clk) == -EPROBE_DEFER) {
888 ret = -EPROBE_DEFER;
889 goto err_out;
890 }
891 dev_notice(&pdev->dev, "Using default clock frequency\n");
892 uartclk = s->chip->freq_std;
893 } else
894 uartclk = clk_get_rate(clk);
895
896 /* Check input frequency */
897 if ((uartclk < s->chip->freq_min) || (uartclk > s->chip->freq_max)) {
898 dev_err(&pdev->dev, "Frequency out of bounds\n");
899 ret = -EINVAL;
900 goto err_out;
901 }
902
903 if (pdata)
904 memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata));
905
906 if (s->pdata.poll_time_us) {
907 dev_info(&pdev->dev, "Using poll mode, resolution %u usecs\n",
908 s->pdata.poll_time_us);
909 s->poll = 1;
910 }
911
912 if (!s->poll) {
913 s->irq = platform_get_irq(pdev, 0);
914 if (s->irq < 0) {
915 dev_err(&pdev->dev, "Missing irq resource data\n");
916 ret = -ENXIO;
917 goto err_out;
918 }
919 }
920
921 s->uart.owner = THIS_MODULE;
922 s->uart.dev_name = "ttySC";
923 s->uart.major = SCCNXP_MAJOR;
924 s->uart.minor = SCCNXP_MINOR;
925 s->uart.nr = s->chip->nr;
926 #ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
927 s->uart.cons = &s->console;
928 s->uart.cons->device = uart_console_device;
929 s->uart.cons->write = sccnxp_console_write;
930 s->uart.cons->setup = sccnxp_console_setup;
931 s->uart.cons->flags = CON_PRINTBUFFER;
932 s->uart.cons->index = -1;
933 s->uart.cons->data = s;
934 strcpy(s->uart.cons->name, "ttySC");
935 #endif
936 ret = uart_register_driver(&s->uart);
937 if (ret) {
938 dev_err(&pdev->dev, "Registering UART driver failed\n");
939 goto err_out;
940 }
941
942 for (i = 0; i < s->uart.nr; i++) {
943 s->port[i].line = i;
944 s->port[i].dev = &pdev->dev;
945 s->port[i].irq = s->irq;
946 s->port[i].type = PORT_SC26XX;
947 s->port[i].fifosize = s->chip->fifosize;
948 s->port[i].flags = UPF_SKIP_TEST | UPF_FIXED_TYPE;
949 s->port[i].iotype = UPIO_MEM;
950 s->port[i].mapbase = res->start;
951 s->port[i].membase = membase;
952 s->port[i].regshift = s->pdata.reg_shift;
953 s->port[i].uartclk = uartclk;
954 s->port[i].ops = &sccnxp_ops;
955 uart_add_one_port(&s->uart, &s->port[i]);
956 /* Set direction to input */
957 if (s->chip->flags & SCCNXP_HAVE_IO)
958 sccnxp_set_bit(&s->port[i], DIR_OP, 0);
959 }
960
961 /* Disable interrupts */
962 s->imr = 0;
963 sccnxp_write(&s->port[0], SCCNXP_IMR_REG, 0);
964
965 if (!s->poll) {
966 ret = devm_request_threaded_irq(&pdev->dev, s->irq, NULL,
967 sccnxp_ist,
968 IRQF_TRIGGER_FALLING |
969 IRQF_ONESHOT,
970 dev_name(&pdev->dev), s);
971 if (!ret)
972 return 0;
973
974 dev_err(&pdev->dev, "Unable to reguest IRQ %i\n", s->irq);
975 } else {
976 init_timer(&s->timer);
977 setup_timer(&s->timer, sccnxp_timer, (unsigned long)s);
978 mod_timer(&s->timer, jiffies +
979 usecs_to_jiffies(s->pdata.poll_time_us));
980 return 0;
981 }
982
983 uart_unregister_driver(&s->uart);
984 err_out:
985 if (!IS_ERR(s->regulator))
986 return regulator_disable(s->regulator);
987
988 return ret;
989 }
990
991 static int sccnxp_remove(struct platform_device *pdev)
992 {
993 int i;
994 struct sccnxp_port *s = platform_get_drvdata(pdev);
995
996 if (!s->poll)
997 devm_free_irq(&pdev->dev, s->irq, s);
998 else
999 del_timer_sync(&s->timer);
1000
1001 for (i = 0; i < s->uart.nr; i++)
1002 uart_remove_one_port(&s->uart, &s->port[i]);
1003
1004 uart_unregister_driver(&s->uart);
1005
1006 if (!IS_ERR(s->regulator))
1007 return regulator_disable(s->regulator);
1008
1009 return 0;
1010 }
1011
1012 static struct platform_driver sccnxp_uart_driver = {
1013 .driver = {
1014 .name = SCCNXP_NAME,
1015 },
1016 .probe = sccnxp_probe,
1017 .remove = sccnxp_remove,
1018 .id_table = sccnxp_id_table,
1019 };
1020 module_platform_driver(sccnxp_uart_driver);
1021
1022 MODULE_LICENSE("GPL v2");
1023 MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
1024 MODULE_DESCRIPTION("SCCNXP serial driver");
Linux with added FPC-III support