?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / tty / serial / serial_txx9.c
blobf80312eed4fda6d501ac1bbcbf0d88250eea38bf
1 /*
2 * Derived from many drivers using generic_serial interface,
3 * especially serial_tx3912.c by Steven J. Hill and r39xx_serial.c
4 * (was in Linux/VR tree) by Jim Pick.
5 *
6 * Copyright (C) 1999 Harald Koerfgen
7 * Copyright (C) 2000 Jim Pick <jim@jimpick.com>
8 * Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com)
9 * Copyright (C) 2000-2002 Toshiba Corporation
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
14 *
15 * Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller
16 */
17
18 #if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
19 #define SUPPORT_SYSRQ
20 #endif
21
22 #include <linux/module.h>
23 #include <linux/ioport.h>
24 #include <linux/init.h>
25 #include <linux/console.h>
26 #include <linux/delay.h>
27 #include <linux/platform_device.h>
28 #include <linux/pci.h>
29 #include <linux/serial_core.h>
30 #include <linux/serial.h>
31 #include <linux/tty.h>
32 #include <linux/tty_flip.h>
33
34 #include <asm/io.h>
35
36 static char *serial_version = "1.11";
37 static char *serial_name = "TX39/49 Serial driver";
38
39 #define PASS_LIMIT 256
40
41 #if !defined(CONFIG_SERIAL_TXX9_STDSERIAL)
42 /* "ttyS" is used for standard serial driver */
43 #define TXX9_TTY_NAME "ttyTX"
44 #define TXX9_TTY_MINOR_START 196
45 #define TXX9_TTY_MAJOR 204
46 #else
47 /* acts like standard serial driver */
48 #define TXX9_TTY_NAME "ttyS"
49 #define TXX9_TTY_MINOR_START 64
50 #define TXX9_TTY_MAJOR TTY_MAJOR
51 #endif
52
53 /* flag aliases */
54 #define UPF_TXX9_HAVE_CTS_LINE UPF_BUGGY_UART
55 #define UPF_TXX9_USE_SCLK UPF_MAGIC_MULTIPLIER
56
57 #ifdef CONFIG_PCI
58 /* support for Toshiba TC86C001 SIO */
59 #define ENABLE_SERIAL_TXX9_PCI
60 #endif
61
62 /*
63 * Number of serial ports
64 */
65 #define UART_NR CONFIG_SERIAL_TXX9_NR_UARTS
66
67 struct uart_txx9_port {
68 struct uart_port port;
69 /* No additional info for now */
70 };
71
72 #define TXX9_REGION_SIZE 0x24
73
74 /* TXX9 Serial Registers */
75 #define TXX9_SILCR 0x00
76 #define TXX9_SIDICR 0x04
77 #define TXX9_SIDISR 0x08
78 #define TXX9_SICISR 0x0c
79 #define TXX9_SIFCR 0x10
80 #define TXX9_SIFLCR 0x14
81 #define TXX9_SIBGR 0x18
82 #define TXX9_SITFIFO 0x1c
83 #define TXX9_SIRFIFO 0x20
84
85 /* SILCR : Line Control */
86 #define TXX9_SILCR_SCS_MASK 0x00000060
87 #define TXX9_SILCR_SCS_IMCLK 0x00000000
88 #define TXX9_SILCR_SCS_IMCLK_BG 0x00000020
89 #define TXX9_SILCR_SCS_SCLK 0x00000040
90 #define TXX9_SILCR_SCS_SCLK_BG 0x00000060
91 #define TXX9_SILCR_UEPS 0x00000010
92 #define TXX9_SILCR_UPEN 0x00000008
93 #define TXX9_SILCR_USBL_MASK 0x00000004
94 #define TXX9_SILCR_USBL_1BIT 0x00000000
95 #define TXX9_SILCR_USBL_2BIT 0x00000004
96 #define TXX9_SILCR_UMODE_MASK 0x00000003
97 #define TXX9_SILCR_UMODE_8BIT 0x00000000
98 #define TXX9_SILCR_UMODE_7BIT 0x00000001
99
100 /* SIDICR : DMA/Int. Control */
101 #define TXX9_SIDICR_TDE 0x00008000
102 #define TXX9_SIDICR_RDE 0x00004000
103 #define TXX9_SIDICR_TIE 0x00002000
104 #define TXX9_SIDICR_RIE 0x00001000
105 #define TXX9_SIDICR_SPIE 0x00000800
106 #define TXX9_SIDICR_CTSAC 0x00000600
107 #define TXX9_SIDICR_STIE_MASK 0x0000003f
108 #define TXX9_SIDICR_STIE_OERS 0x00000020
109 #define TXX9_SIDICR_STIE_CTSS 0x00000010
110 #define TXX9_SIDICR_STIE_RBRKD 0x00000008
111 #define TXX9_SIDICR_STIE_TRDY 0x00000004
112 #define TXX9_SIDICR_STIE_TXALS 0x00000002
113 #define TXX9_SIDICR_STIE_UBRKD 0x00000001
114
115 /* SIDISR : DMA/Int. Status */
116 #define TXX9_SIDISR_UBRK 0x00008000
117 #define TXX9_SIDISR_UVALID 0x00004000
118 #define TXX9_SIDISR_UFER 0x00002000
119 #define TXX9_SIDISR_UPER 0x00001000
120 #define TXX9_SIDISR_UOER 0x00000800
121 #define TXX9_SIDISR_ERI 0x00000400
122 #define TXX9_SIDISR_TOUT 0x00000200
123 #define TXX9_SIDISR_TDIS 0x00000100
124 #define TXX9_SIDISR_RDIS 0x00000080
125 #define TXX9_SIDISR_STIS 0x00000040
126 #define TXX9_SIDISR_RFDN_MASK 0x0000001f
127
128 /* SICISR : Change Int. Status */
129 #define TXX9_SICISR_OERS 0x00000020
130 #define TXX9_SICISR_CTSS 0x00000010
131 #define TXX9_SICISR_RBRKD 0x00000008
132 #define TXX9_SICISR_TRDY 0x00000004
133 #define TXX9_SICISR_TXALS 0x00000002
134 #define TXX9_SICISR_UBRKD 0x00000001
135
136 /* SIFCR : FIFO Control */
137 #define TXX9_SIFCR_SWRST 0x00008000
138 #define TXX9_SIFCR_RDIL_MASK 0x00000180
139 #define TXX9_SIFCR_RDIL_1 0x00000000
140 #define TXX9_SIFCR_RDIL_4 0x00000080
141 #define TXX9_SIFCR_RDIL_8 0x00000100
142 #define TXX9_SIFCR_RDIL_12 0x00000180
143 #define TXX9_SIFCR_RDIL_MAX 0x00000180
144 #define TXX9_SIFCR_TDIL_MASK 0x00000018
145 #define TXX9_SIFCR_TDIL_1 0x00000000
146 #define TXX9_SIFCR_TDIL_4 0x00000001
147 #define TXX9_SIFCR_TDIL_8 0x00000010
148 #define TXX9_SIFCR_TDIL_MAX 0x00000010
149 #define TXX9_SIFCR_TFRST 0x00000004
150 #define TXX9_SIFCR_RFRST 0x00000002
151 #define TXX9_SIFCR_FRSTE 0x00000001
152 #define TXX9_SIO_TX_FIFO 8
153 #define TXX9_SIO_RX_FIFO 16
154
155 /* SIFLCR : Flow Control */
156 #define TXX9_SIFLCR_RCS 0x00001000
157 #define TXX9_SIFLCR_TES 0x00000800
158 #define TXX9_SIFLCR_RTSSC 0x00000200
159 #define TXX9_SIFLCR_RSDE 0x00000100
160 #define TXX9_SIFLCR_TSDE 0x00000080
161 #define TXX9_SIFLCR_RTSTL_MASK 0x0000001e
162 #define TXX9_SIFLCR_RTSTL_MAX 0x0000001e
163 #define TXX9_SIFLCR_TBRK 0x00000001
164
165 /* SIBGR : Baudrate Control */
166 #define TXX9_SIBGR_BCLK_MASK 0x00000300
167 #define TXX9_SIBGR_BCLK_T0 0x00000000
168 #define TXX9_SIBGR_BCLK_T2 0x00000100
169 #define TXX9_SIBGR_BCLK_T4 0x00000200
170 #define TXX9_SIBGR_BCLK_T6 0x00000300
171 #define TXX9_SIBGR_BRD_MASK 0x000000ff
172
173 static inline unsigned int sio_in(struct uart_txx9_port *up, int offset)
174 {
175 switch (up->port.iotype) {
176 default:
177 return __raw_readl(up->port.membase + offset);
178 case UPIO_PORT:
179 return inl(up->port.iobase + offset);
180 }
181 }
182
183 static inline void
184 sio_out(struct uart_txx9_port *up, int offset, int value)
185 {
186 switch (up->port.iotype) {
187 default:
188 __raw_writel(value, up->port.membase + offset);
189 break;
190 case UPIO_PORT:
191 outl(value, up->port.iobase + offset);
192 break;
193 }
194 }
195
196 static inline void
197 sio_mask(struct uart_txx9_port *up, int offset, unsigned int value)
198 {
199 sio_out(up, offset, sio_in(up, offset) & ~value);
200 }
201 static inline void
202 sio_set(struct uart_txx9_port *up, int offset, unsigned int value)
203 {
204 sio_out(up, offset, sio_in(up, offset) | value);
205 }
206
207 static inline void
208 sio_quot_set(struct uart_txx9_port *up, int quot)
209 {
210 quot >>= 1;
211 if (quot < 256)
212 sio_out(up, TXX9_SIBGR, quot | TXX9_SIBGR_BCLK_T0);
213 else if (quot < (256 << 2))
214 sio_out(up, TXX9_SIBGR, (quot >> 2) | TXX9_SIBGR_BCLK_T2);
215 else if (quot < (256 << 4))
216 sio_out(up, TXX9_SIBGR, (quot >> 4) | TXX9_SIBGR_BCLK_T4);
217 else if (quot < (256 << 6))
218 sio_out(up, TXX9_SIBGR, (quot >> 6) | TXX9_SIBGR_BCLK_T6);
219 else
220 sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6);
221 }
222
223 static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port)
224 {
225 return container_of(port, struct uart_txx9_port, port);
226 }
227
228 static void serial_txx9_stop_tx(struct uart_port *port)
229 {
230 struct uart_txx9_port *up = to_uart_txx9_port(port);
231 sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
232 }
233
234 static void serial_txx9_start_tx(struct uart_port *port)
235 {
236 struct uart_txx9_port *up = to_uart_txx9_port(port);
237 sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
238 }
239
240 static void serial_txx9_stop_rx(struct uart_port *port)
241 {
242 struct uart_txx9_port *up = to_uart_txx9_port(port);
243 up->port.read_status_mask &= ~TXX9_SIDISR_RDIS;
244 }
245
246 static void serial_txx9_initialize(struct uart_port *port)
247 {
248 struct uart_txx9_port *up = to_uart_txx9_port(port);
249 unsigned int tmout = 10000;
250
251 sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST);
252 /* TX4925 BUG WORKAROUND. Accessing SIOC register
253 * immediately after soft reset causes bus error. */
254 mmiowb();
255 udelay(1);
256 while ((sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST) && --tmout)
257 udelay(1);
258 /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */
259 sio_set(up, TXX9_SIFCR,
260 TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1);
261 /* initial settings */
262 sio_out(up, TXX9_SILCR,
263 TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT |
264 ((up->port.flags & UPF_TXX9_USE_SCLK) ?
265 TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG));
266 sio_quot_set(up, uart_get_divisor(port, 9600));
267 sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */);
268 sio_out(up, TXX9_SIDICR, 0);
269 }
270
271 static inline void
272 receive_chars(struct uart_txx9_port *up, unsigned int *status)
273 {
274 unsigned char ch;
275 unsigned int disr = *status;
276 int max_count = 256;
277 char flag;
278 unsigned int next_ignore_status_mask;
279
280 do {
281 ch = sio_in(up, TXX9_SIRFIFO);
282 flag = TTY_NORMAL;
283 up->port.icount.rx++;
284
285 /* mask out RFDN_MASK bit added by previous overrun */
286 next_ignore_status_mask =
287 up->port.ignore_status_mask & ~TXX9_SIDISR_RFDN_MASK;
288 if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER |
289 TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) {
290 /*
291 * For statistics only
292 */
293 if (disr & TXX9_SIDISR_UBRK) {
294 disr &= ~(TXX9_SIDISR_UFER | TXX9_SIDISR_UPER);
295 up->port.icount.brk++;
296 /*
297 * We do the SysRQ and SAK checking
298 * here because otherwise the break
299 * may get masked by ignore_status_mask
300 * or read_status_mask.
301 */
302 if (uart_handle_break(&up->port))
303 goto ignore_char;
304 } else if (disr & TXX9_SIDISR_UPER)
305 up->port.icount.parity++;
306 else if (disr & TXX9_SIDISR_UFER)
307 up->port.icount.frame++;
308 if (disr & TXX9_SIDISR_UOER) {
309 up->port.icount.overrun++;
310 /*
311 * The receiver read buffer still hold
312 * a char which caused overrun.
313 * Ignore next char by adding RFDN_MASK
314 * to ignore_status_mask temporarily.
315 */
316 next_ignore_status_mask |=
317 TXX9_SIDISR_RFDN_MASK;
318 }
319
320 /*
321 * Mask off conditions which should be ingored.
322 */
323 disr &= up->port.read_status_mask;
324
325 if (disr & TXX9_SIDISR_UBRK) {
326 flag = TTY_BREAK;
327 } else if (disr & TXX9_SIDISR_UPER)
328 flag = TTY_PARITY;
329 else if (disr & TXX9_SIDISR_UFER)
330 flag = TTY_FRAME;
331 }
332 if (uart_handle_sysrq_char(&up->port, ch))
333 goto ignore_char;
334
335 uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag);
336
337 ignore_char:
338 up->port.ignore_status_mask = next_ignore_status_mask;
339 disr = sio_in(up, TXX9_SIDISR);
340 } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0));
341 spin_unlock(&up->port.lock);
342 tty_flip_buffer_push(&up->port.state->port);
343 spin_lock(&up->port.lock);
344 *status = disr;
345 }
346
347 static inline void transmit_chars(struct uart_txx9_port *up)
348 {
349 struct circ_buf *xmit = &up->port.state->xmit;
350 int count;
351
352 if (up->port.x_char) {
353 sio_out(up, TXX9_SITFIFO, up->port.x_char);
354 up->port.icount.tx++;
355 up->port.x_char = 0;
356 return;
357 }
358 if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
359 serial_txx9_stop_tx(&up->port);
360 return;
361 }
362
363 count = TXX9_SIO_TX_FIFO;
364 do {
365 sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]);
366 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
367 up->port.icount.tx++;
368 if (uart_circ_empty(xmit))
369 break;
370 } while (--count > 0);
371
372 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
373 uart_write_wakeup(&up->port);
374
375 if (uart_circ_empty(xmit))
376 serial_txx9_stop_tx(&up->port);
377 }
378
379 static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id)
380 {
381 int pass_counter = 0;
382 struct uart_txx9_port *up = dev_id;
383 unsigned int status;
384
385 while (1) {
386 spin_lock(&up->port.lock);
387 status = sio_in(up, TXX9_SIDISR);
388 if (!(sio_in(up, TXX9_SIDICR) & TXX9_SIDICR_TIE))
389 status &= ~TXX9_SIDISR_TDIS;
390 if (!(status & (TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS |
391 TXX9_SIDISR_TOUT))) {
392 spin_unlock(&up->port.lock);
393 break;
394 }
395
396 if (status & TXX9_SIDISR_RDIS)
397 receive_chars(up, &status);
398 if (status & TXX9_SIDISR_TDIS)
399 transmit_chars(up);
400 /* Clear TX/RX Int. Status */
401 sio_mask(up, TXX9_SIDISR,
402 TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS |
403 TXX9_SIDISR_TOUT);
404 spin_unlock(&up->port.lock);
405
406 if (pass_counter++ > PASS_LIMIT)
407 break;
408 }
409
410 return pass_counter ? IRQ_HANDLED : IRQ_NONE;
411 }
412
413 static unsigned int serial_txx9_tx_empty(struct uart_port *port)
414 {
415 struct uart_txx9_port *up = to_uart_txx9_port(port);
416 unsigned long flags;
417 unsigned int ret;
418
419 spin_lock_irqsave(&up->port.lock, flags);
420 ret = (sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS) ? TIOCSER_TEMT : 0;
421 spin_unlock_irqrestore(&up->port.lock, flags);
422
423 return ret;
424 }
425
426 static unsigned int serial_txx9_get_mctrl(struct uart_port *port)
427 {
428 struct uart_txx9_port *up = to_uart_txx9_port(port);
429 unsigned int ret;
430
431 /* no modem control lines */
432 ret = TIOCM_CAR | TIOCM_DSR;
433 ret |= (sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS;
434 ret |= (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS;
435
436 return ret;
437 }
438
439 static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl)
440 {
441 struct uart_txx9_port *up = to_uart_txx9_port(port);
442
443 if (mctrl & TIOCM_RTS)
444 sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC);
445 else
446 sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC);
447 }
448
449 static void serial_txx9_break_ctl(struct uart_port *port, int break_state)
450 {
451 struct uart_txx9_port *up = to_uart_txx9_port(port);
452 unsigned long flags;
453
454 spin_lock_irqsave(&up->port.lock, flags);
455 if (break_state == -1)
456 sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK);
457 else
458 sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK);
459 spin_unlock_irqrestore(&up->port.lock, flags);
460 }
461
462 #if defined(CONFIG_SERIAL_TXX9_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
463 /*
464 * Wait for transmitter & holding register to empty
465 */
466 static void wait_for_xmitr(struct uart_txx9_port *up)
467 {
468 unsigned int tmout = 10000;
469
470 /* Wait up to 10ms for the character(s) to be sent. */
471 while (--tmout &&
472 !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS))
473 udelay(1);
474
475 /* Wait up to 1s for flow control if necessary */
476 if (up->port.flags & UPF_CONS_FLOW) {
477 tmout = 1000000;
478 while (--tmout &&
479 (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS))
480 udelay(1);
481 }
482 }
483 #endif
484
485 #ifdef CONFIG_CONSOLE_POLL
486 /*
487 * Console polling routines for writing and reading from the uart while
488 * in an interrupt or debug context.
489 */
490
491 static int serial_txx9_get_poll_char(struct uart_port *port)
492 {
493 unsigned int ier;
494 unsigned char c;
495 struct uart_txx9_port *up = to_uart_txx9_port(port);
496
497 /*
498 * First save the IER then disable the interrupts
499 */
500 ier = sio_in(up, TXX9_SIDICR);
501 sio_out(up, TXX9_SIDICR, 0);
502
503 while (sio_in(up, TXX9_SIDISR) & TXX9_SIDISR_UVALID)
504 ;
505
506 c = sio_in(up, TXX9_SIRFIFO);
507
508 /*
509 * Finally, clear RX interrupt status
510 * and restore the IER
511 */
512 sio_mask(up, TXX9_SIDISR, TXX9_SIDISR_RDIS);
513 sio_out(up, TXX9_SIDICR, ier);
514 return c;
515 }
516
517
518 static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c)
519 {
520 unsigned int ier;
521 struct uart_txx9_port *up = to_uart_txx9_port(port);
522
523 /*
524 * First save the IER then disable the interrupts
525 */
526 ier = sio_in(up, TXX9_SIDICR);
527 sio_out(up, TXX9_SIDICR, 0);
528
529 wait_for_xmitr(up);
530 /*
531 * Send the character out.
532 */
533 sio_out(up, TXX9_SITFIFO, c);
534
535 /*
536 * Finally, wait for transmitter to become empty
537 * and restore the IER
538 */
539 wait_for_xmitr(up);
540 sio_out(up, TXX9_SIDICR, ier);
541 }
542
543 #endif /* CONFIG_CONSOLE_POLL */
544
545 static int serial_txx9_startup(struct uart_port *port)
546 {
547 struct uart_txx9_port *up = to_uart_txx9_port(port);
548 unsigned long flags;
549 int retval;
550
551 /*
552 * Clear the FIFO buffers and disable them.
553 * (they will be reenabled in set_termios())
554 */
555 sio_set(up, TXX9_SIFCR,
556 TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
557 /* clear reset */
558 sio_mask(up, TXX9_SIFCR,
559 TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
560 sio_out(up, TXX9_SIDICR, 0);
561
562 /*
563 * Clear the interrupt registers.
564 */
565 sio_out(up, TXX9_SIDISR, 0);
566
567 retval = request_irq(up->port.irq, serial_txx9_interrupt,
568 IRQF_SHARED, "serial_txx9", up);
569 if (retval)
570 return retval;
571
572 /*
573 * Now, initialize the UART
574 */
575 spin_lock_irqsave(&up->port.lock, flags);
576 serial_txx9_set_mctrl(&up->port, up->port.mctrl);
577 spin_unlock_irqrestore(&up->port.lock, flags);
578
579 /* Enable RX/TX */
580 sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE);
581
582 /*
583 * Finally, enable interrupts.
584 */
585 sio_set(up, TXX9_SIDICR, TXX9_SIDICR_RIE);
586
587 return 0;
588 }
589
590 static void serial_txx9_shutdown(struct uart_port *port)
591 {
592 struct uart_txx9_port *up = to_uart_txx9_port(port);
593 unsigned long flags;
594
595 /*
596 * Disable interrupts from this port
597 */
598 sio_out(up, TXX9_SIDICR, 0); /* disable all intrs */
599
600 spin_lock_irqsave(&up->port.lock, flags);
601 serial_txx9_set_mctrl(&up->port, up->port.mctrl);
602 spin_unlock_irqrestore(&up->port.lock, flags);
603
604 /*
605 * Disable break condition
606 */
607 sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK);
608
609 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
610 if (up->port.cons && up->port.line == up->port.cons->index) {
611 free_irq(up->port.irq, up);
612 return;
613 }
614 #endif
615 /* reset FIFOs */
616 sio_set(up, TXX9_SIFCR,
617 TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
618 /* clear reset */
619 sio_mask(up, TXX9_SIFCR,
620 TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
621
622 /* Disable RX/TX */
623 sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE);
624
625 free_irq(up->port.irq, up);
626 }
627
628 static void
629 serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios,
630 struct ktermios *old)
631 {
632 struct uart_txx9_port *up = to_uart_txx9_port(port);
633 unsigned int cval, fcr = 0;
634 unsigned long flags;
635 unsigned int baud, quot;
636
637 /*
638 * We don't support modem control lines.
639 */
640 termios->c_cflag &= ~(HUPCL | CMSPAR);
641 termios->c_cflag |= CLOCAL;
642
643 cval = sio_in(up, TXX9_SILCR);
644 /* byte size and parity */
645 cval &= ~TXX9_SILCR_UMODE_MASK;
646 switch (termios->c_cflag & CSIZE) {
647 case CS7:
648 cval |= TXX9_SILCR_UMODE_7BIT;
649 break;
650 default:
651 case CS5: /* not supported */
652 case CS6: /* not supported */
653 case CS8:
654 cval |= TXX9_SILCR_UMODE_8BIT;
655 break;
656 }
657
658 cval &= ~TXX9_SILCR_USBL_MASK;
659 if (termios->c_cflag & CSTOPB)
660 cval |= TXX9_SILCR_USBL_2BIT;
661 else
662 cval |= TXX9_SILCR_USBL_1BIT;
663 cval &= ~(TXX9_SILCR_UPEN | TXX9_SILCR_UEPS);
664 if (termios->c_cflag & PARENB)
665 cval |= TXX9_SILCR_UPEN;
666 if (!(termios->c_cflag & PARODD))
667 cval |= TXX9_SILCR_UEPS;
668
669 /*
670 * Ask the core to calculate the divisor for us.
671 */
672 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16/2);
673 quot = uart_get_divisor(port, baud);
674
675 /* Set up FIFOs */
676 /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */
677 fcr = TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1;
678
679 /*
680 * Ok, we're now changing the port state. Do it with
681 * interrupts disabled.
682 */
683 spin_lock_irqsave(&up->port.lock, flags);
684
685 /*
686 * Update the per-port timeout.
687 */
688 uart_update_timeout(port, termios->c_cflag, baud);
689
690 up->port.read_status_mask = TXX9_SIDISR_UOER |
691 TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS;
692 if (termios->c_iflag & INPCK)
693 up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER;
694 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
695 up->port.read_status_mask |= TXX9_SIDISR_UBRK;
696
697 /*
698 * Characteres to ignore
699 */
700 up->port.ignore_status_mask = 0;
701 if (termios->c_iflag & IGNPAR)
702 up->port.ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER;
703 if (termios->c_iflag & IGNBRK) {
704 up->port.ignore_status_mask |= TXX9_SIDISR_UBRK;
705 /*
706 * If we're ignoring parity and break indicators,
707 * ignore overruns too (for real raw support).
708 */
709 if (termios->c_iflag & IGNPAR)
710 up->port.ignore_status_mask |= TXX9_SIDISR_UOER;
711 }
712
713 /*
714 * ignore all characters if CREAD is not set
715 */
716 if ((termios->c_cflag & CREAD) == 0)
717 up->port.ignore_status_mask |= TXX9_SIDISR_RDIS;
718
719 /* CTS flow control flag */
720 if ((termios->c_cflag & CRTSCTS) &&
721 (up->port.flags & UPF_TXX9_HAVE_CTS_LINE)) {
722 sio_set(up, TXX9_SIFLCR,
723 TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES);
724 } else {
725 sio_mask(up, TXX9_SIFLCR,
726 TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES);
727 }
728
729 sio_out(up, TXX9_SILCR, cval);
730 sio_quot_set(up, quot);
731 sio_out(up, TXX9_SIFCR, fcr);
732
733 serial_txx9_set_mctrl(&up->port, up->port.mctrl);
734 spin_unlock_irqrestore(&up->port.lock, flags);
735 }
736
737 static void
738 serial_txx9_pm(struct uart_port *port, unsigned int state,
739 unsigned int oldstate)
740 {
741 /*
742 * If oldstate was -1 this is called from
743 * uart_configure_port(). In this case do not initialize the
744 * port now, because the port was already initialized (for
745 * non-console port) or should not be initialized here (for
746 * console port). If we initialized the port here we lose
747 * serial console settings.
748 */
749 if (state == 0 && oldstate != -1)
750 serial_txx9_initialize(port);
751 }
752
753 static int serial_txx9_request_resource(struct uart_txx9_port *up)
754 {
755 unsigned int size = TXX9_REGION_SIZE;
756 int ret = 0;
757
758 switch (up->port.iotype) {
759 default:
760 if (!up->port.mapbase)
761 break;
762
763 if (!request_mem_region(up->port.mapbase, size, "serial_txx9")) {
764 ret = -EBUSY;
765 break;
766 }
767
768 if (up->port.flags & UPF_IOREMAP) {
769 up->port.membase = ioremap(up->port.mapbase, size);
770 if (!up->port.membase) {
771 release_mem_region(up->port.mapbase, size);
772 ret = -ENOMEM;
773 }
774 }
775 break;
776
777 case UPIO_PORT:
778 if (!request_region(up->port.iobase, size, "serial_txx9"))
779 ret = -EBUSY;
780 break;
781 }
782 return ret;
783 }
784
785 static void serial_txx9_release_resource(struct uart_txx9_port *up)
786 {
787 unsigned int size = TXX9_REGION_SIZE;
788
789 switch (up->port.iotype) {
790 default:
791 if (!up->port.mapbase)
792 break;
793
794 if (up->port.flags & UPF_IOREMAP) {
795 iounmap(up->port.membase);
796 up->port.membase = NULL;
797 }
798
799 release_mem_region(up->port.mapbase, size);
800 break;
801
802 case UPIO_PORT:
803 release_region(up->port.iobase, size);
804 break;
805 }
806 }
807
808 static void serial_txx9_release_port(struct uart_port *port)
809 {
810 struct uart_txx9_port *up = to_uart_txx9_port(port);
811 serial_txx9_release_resource(up);
812 }
813
814 static int serial_txx9_request_port(struct uart_port *port)
815 {
816 struct uart_txx9_port *up = to_uart_txx9_port(port);
817 return serial_txx9_request_resource(up);
818 }
819
820 static void serial_txx9_config_port(struct uart_port *port, int uflags)
821 {
822 struct uart_txx9_port *up = to_uart_txx9_port(port);
823 int ret;
824
825 /*
826 * Find the region that we can probe for. This in turn
827 * tells us whether we can probe for the type of port.
828 */
829 ret = serial_txx9_request_resource(up);
830 if (ret < 0)
831 return;
832 port->type = PORT_TXX9;
833 up->port.fifosize = TXX9_SIO_TX_FIFO;
834
835 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
836 if (up->port.line == up->port.cons->index)
837 return;
838 #endif
839 serial_txx9_initialize(port);
840 }
841
842 static const char *
843 serial_txx9_type(struct uart_port *port)
844 {
845 return "txx9";
846 }
847
848 static struct uart_ops serial_txx9_pops = {
849 .tx_empty = serial_txx9_tx_empty,
850 .set_mctrl = serial_txx9_set_mctrl,
851 .get_mctrl = serial_txx9_get_mctrl,
852 .stop_tx = serial_txx9_stop_tx,
853 .start_tx = serial_txx9_start_tx,
854 .stop_rx = serial_txx9_stop_rx,
855 .break_ctl = serial_txx9_break_ctl,
856 .startup = serial_txx9_startup,
857 .shutdown = serial_txx9_shutdown,
858 .set_termios = serial_txx9_set_termios,
859 .pm = serial_txx9_pm,
860 .type = serial_txx9_type,
861 .release_port = serial_txx9_release_port,
862 .request_port = serial_txx9_request_port,
863 .config_port = serial_txx9_config_port,
864 #ifdef CONFIG_CONSOLE_POLL
865 .poll_get_char = serial_txx9_get_poll_char,
866 .poll_put_char = serial_txx9_put_poll_char,
867 #endif
868 };
869
870 static struct uart_txx9_port serial_txx9_ports[UART_NR];
871
872 static void __init serial_txx9_register_ports(struct uart_driver *drv,
873 struct device *dev)
874 {
875 int i;
876
877 for (i = 0; i < UART_NR; i++) {
878 struct uart_txx9_port *up = &serial_txx9_ports[i];
879
880 up->port.line = i;
881 up->port.ops = &serial_txx9_pops;
882 up->port.dev = dev;
883 if (up->port.iobase || up->port.mapbase)
884 uart_add_one_port(drv, &up->port);
885 }
886 }
887
888 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
889
890 static void serial_txx9_console_putchar(struct uart_port *port, int ch)
891 {
892 struct uart_txx9_port *up = to_uart_txx9_port(port);
893
894 wait_for_xmitr(up);
895 sio_out(up, TXX9_SITFIFO, ch);
896 }
897
898 /*
899 * Print a string to the serial port trying not to disturb
900 * any possible real use of the port...
901 *
902 * The console_lock must be held when we get here.
903 */
904 static void
905 serial_txx9_console_write(struct console *co, const char *s, unsigned int count)
906 {
907 struct uart_txx9_port *up = &serial_txx9_ports[co->index];
908 unsigned int ier, flcr;
909
910 /*
911 * First save the UER then disable the interrupts
912 */
913 ier = sio_in(up, TXX9_SIDICR);
914 sio_out(up, TXX9_SIDICR, 0);
915 /*
916 * Disable flow-control if enabled (and unnecessary)
917 */
918 flcr = sio_in(up, TXX9_SIFLCR);
919 if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES))
920 sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES);
921
922 uart_console_write(&up->port, s, count, serial_txx9_console_putchar);
923
924 /*
925 * Finally, wait for transmitter to become empty
926 * and restore the IER
927 */
928 wait_for_xmitr(up);
929 sio_out(up, TXX9_SIFLCR, flcr);
930 sio_out(up, TXX9_SIDICR, ier);
931 }
932
933 static int __init serial_txx9_console_setup(struct console *co, char *options)
934 {
935 struct uart_port *port;
936 struct uart_txx9_port *up;
937 int baud = 9600;
938 int bits = 8;
939 int parity = 'n';
940 int flow = 'n';
941
942 /*
943 * Check whether an invalid uart number has been specified, and
944 * if so, search for the first available port that does have
945 * console support.
946 */
947 if (co->index >= UART_NR)
948 co->index = 0;
949 up = &serial_txx9_ports[co->index];
950 port = &up->port;
951 if (!port->ops)
952 return -ENODEV;
953
954 serial_txx9_initialize(&up->port);
955
956 if (options)
957 uart_parse_options(options, &baud, &parity, &bits, &flow);
958
959 return uart_set_options(port, co, baud, parity, bits, flow);
960 }
961
962 static struct uart_driver serial_txx9_reg;
963 static struct console serial_txx9_console = {
964 .name = TXX9_TTY_NAME,
965 .write = serial_txx9_console_write,
966 .device = uart_console_device,
967 .setup = serial_txx9_console_setup,
968 .flags = CON_PRINTBUFFER,
969 .index = -1,
970 .data = &serial_txx9_reg,
971 };
972
973 static int __init serial_txx9_console_init(void)
974 {
975 register_console(&serial_txx9_console);
976 return 0;
977 }
978 console_initcall(serial_txx9_console_init);
979
980 #define SERIAL_TXX9_CONSOLE &serial_txx9_console
981 #else
982 #define SERIAL_TXX9_CONSOLE NULL
983 #endif
984
985 static struct uart_driver serial_txx9_reg = {
986 .owner = THIS_MODULE,
987 .driver_name = "serial_txx9",
988 .dev_name = TXX9_TTY_NAME,
989 .major = TXX9_TTY_MAJOR,
990 .minor = TXX9_TTY_MINOR_START,
991 .nr = UART_NR,
992 .cons = SERIAL_TXX9_CONSOLE,
993 };
994
995 int __init early_serial_txx9_setup(struct uart_port *port)
996 {
997 if (port->line >= ARRAY_SIZE(serial_txx9_ports))
998 return -ENODEV;
999
1000 serial_txx9_ports[port->line].port = *port;
1001 serial_txx9_ports[port->line].port.ops = &serial_txx9_pops;
1002 serial_txx9_ports[port->line].port.flags |=
1003 UPF_BOOT_AUTOCONF | UPF_FIXED_PORT;
1004 return 0;
1005 }
1006
1007 static DEFINE_MUTEX(serial_txx9_mutex);
1008
1009 /**
1010 * serial_txx9_register_port - register a serial port
1011 * @port: serial port template
1012 *
1013 * Configure the serial port specified by the request.
1014 *
1015 * The port is then probed and if necessary the IRQ is autodetected
1016 * If this fails an error is returned.
1017 *
1018 * On success the port is ready to use and the line number is returned.
1019 */
1020 static int serial_txx9_register_port(struct uart_port *port)
1021 {
1022 int i;
1023 struct uart_txx9_port *uart;
1024 int ret = -ENOSPC;
1025
1026 mutex_lock(&serial_txx9_mutex);
1027 for (i = 0; i < UART_NR; i++) {
1028 uart = &serial_txx9_ports[i];
1029 if (uart_match_port(&uart->port, port)) {
1030 uart_remove_one_port(&serial_txx9_reg, &uart->port);
1031 break;
1032 }
1033 }
1034 if (i == UART_NR) {
1035 /* Find unused port */
1036 for (i = 0; i < UART_NR; i++) {
1037 uart = &serial_txx9_ports[i];
1038 if (!(uart->port.iobase || uart->port.mapbase))
1039 break;
1040 }
1041 }
1042 if (i < UART_NR) {
1043 uart->port.iobase = port->iobase;
1044 uart->port.membase = port->membase;
1045 uart->port.irq = port->irq;
1046 uart->port.uartclk = port->uartclk;
1047 uart->port.iotype = port->iotype;
1048 uart->port.flags = port->flags
1049 | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT;
1050 uart->port.mapbase = port->mapbase;
1051 if (port->dev)
1052 uart->port.dev = port->dev;
1053 ret = uart_add_one_port(&serial_txx9_reg, &uart->port);
1054 if (ret == 0)
1055 ret = uart->port.line;
1056 }
1057 mutex_unlock(&serial_txx9_mutex);
1058 return ret;
1059 }
1060
1061 /**
1062 * serial_txx9_unregister_port - remove a txx9 serial port at runtime
1063 * @line: serial line number
1064 *
1065 * Remove one serial port. This may not be called from interrupt
1066 * context. We hand the port back to the our control.
1067 */
1068 static void serial_txx9_unregister_port(int line)
1069 {
1070 struct uart_txx9_port *uart = &serial_txx9_ports[line];
1071
1072 mutex_lock(&serial_txx9_mutex);
1073 uart_remove_one_port(&serial_txx9_reg, &uart->port);
1074 uart->port.flags = 0;
1075 uart->port.type = PORT_UNKNOWN;
1076 uart->port.iobase = 0;
1077 uart->port.mapbase = 0;
1078 uart->port.membase = NULL;
1079 uart->port.dev = NULL;
1080 mutex_unlock(&serial_txx9_mutex);
1081 }
1082
1083 /*
1084 * Register a set of serial devices attached to a platform device.
1085 */
1086 static int serial_txx9_probe(struct platform_device *dev)
1087 {
1088 struct uart_port *p = dev_get_platdata(&dev->dev);
1089 struct uart_port port;
1090 int ret, i;
1091
1092 memset(&port, 0, sizeof(struct uart_port));
1093 for (i = 0; p && p->uartclk != 0; p++, i++) {
1094 port.iobase = p->iobase;
1095 port.membase = p->membase;
1096 port.irq = p->irq;
1097 port.uartclk = p->uartclk;
1098 port.iotype = p->iotype;
1099 port.flags = p->flags;
1100 port.mapbase = p->mapbase;
1101 port.dev = &dev->dev;
1102 ret = serial_txx9_register_port(&port);
1103 if (ret < 0) {
1104 dev_err(&dev->dev, "unable to register port at index %d "
1105 "(IO%lx MEM%llx IRQ%d): %d\n", i,
1106 p->iobase, (unsigned long long)p->mapbase,
1107 p->irq, ret);
1108 }
1109 }
1110 return 0;
1111 }
1112
1113 /*
1114 * Remove serial ports registered against a platform device.
1115 */
1116 static int serial_txx9_remove(struct platform_device *dev)
1117 {
1118 int i;
1119
1120 for (i = 0; i < UART_NR; i++) {
1121 struct uart_txx9_port *up = &serial_txx9_ports[i];
1122
1123 if (up->port.dev == &dev->dev)
1124 serial_txx9_unregister_port(i);
1125 }
1126 return 0;
1127 }
1128
1129 #ifdef CONFIG_PM
1130 static int serial_txx9_suspend(struct platform_device *dev, pm_message_t state)
1131 {
1132 int i;
1133
1134 for (i = 0; i < UART_NR; i++) {
1135 struct uart_txx9_port *up = &serial_txx9_ports[i];
1136
1137 if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
1138 uart_suspend_port(&serial_txx9_reg, &up->port);
1139 }
1140
1141 return 0;
1142 }
1143
1144 static int serial_txx9_resume(struct platform_device *dev)
1145 {
1146 int i;
1147
1148 for (i = 0; i < UART_NR; i++) {
1149 struct uart_txx9_port *up = &serial_txx9_ports[i];
1150
1151 if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
1152 uart_resume_port(&serial_txx9_reg, &up->port);
1153 }
1154
1155 return 0;
1156 }
1157 #endif
1158
1159 static struct platform_driver serial_txx9_plat_driver = {
1160 .probe = serial_txx9_probe,
1161 .remove = serial_txx9_remove,
1162 #ifdef CONFIG_PM
1163 .suspend = serial_txx9_suspend,
1164 .resume = serial_txx9_resume,
1165 #endif
1166 .driver = {
1167 .name = "serial_txx9",
1168 },
1169 };
1170
1171 #ifdef ENABLE_SERIAL_TXX9_PCI
1172 /*
1173 * Probe one serial board. Unfortunately, there is no rhyme nor reason
1174 * to the arrangement of serial ports on a PCI card.
1175 */
1176 static int
1177 pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
1178 {
1179 struct uart_port port;
1180 int line;
1181 int rc;
1182
1183 rc = pci_enable_device(dev);
1184 if (rc)
1185 return rc;
1186
1187 memset(&port, 0, sizeof(port));
1188 port.ops = &serial_txx9_pops;
1189 port.flags |= UPF_TXX9_HAVE_CTS_LINE;
1190 port.uartclk = 66670000;
1191 port.irq = dev->irq;
1192 port.iotype = UPIO_PORT;
1193 port.iobase = pci_resource_start(dev, 1);
1194 port.dev = &dev->dev;
1195 line = serial_txx9_register_port(&port);
1196 if (line < 0) {
1197 printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line);
1198 pci_disable_device(dev);
1199 return line;
1200 }
1201 pci_set_drvdata(dev, &serial_txx9_ports[line]);
1202
1203 return 0;
1204 }
1205
1206 static void pciserial_txx9_remove_one(struct pci_dev *dev)
1207 {
1208 struct uart_txx9_port *up = pci_get_drvdata(dev);
1209
1210 if (up) {
1211 serial_txx9_unregister_port(up->port.line);
1212 pci_disable_device(dev);
1213 }
1214 }
1215
1216 #ifdef CONFIG_PM
1217 static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state)
1218 {
1219 struct uart_txx9_port *up = pci_get_drvdata(dev);
1220
1221 if (up)
1222 uart_suspend_port(&serial_txx9_reg, &up->port);
1223 pci_save_state(dev);
1224 pci_set_power_state(dev, pci_choose_state(dev, state));
1225 return 0;
1226 }
1227
1228 static int pciserial_txx9_resume_one(struct pci_dev *dev)
1229 {
1230 struct uart_txx9_port *up = pci_get_drvdata(dev);
1231
1232 pci_set_power_state(dev, PCI_D0);
1233 pci_restore_state(dev);
1234 if (up)
1235 uart_resume_port(&serial_txx9_reg, &up->port);
1236 return 0;
1237 }
1238 #endif
1239
1240 static const struct pci_device_id serial_txx9_pci_tbl[] = {
1241 { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC) },
1242 { 0, }
1243 };
1244
1245 static struct pci_driver serial_txx9_pci_driver = {
1246 .name = "serial_txx9",
1247 .probe = pciserial_txx9_init_one,
1248 .remove = pciserial_txx9_remove_one,
1249 #ifdef CONFIG_PM
1250 .suspend = pciserial_txx9_suspend_one,
1251 .resume = pciserial_txx9_resume_one,
1252 #endif
1253 .id_table = serial_txx9_pci_tbl,
1254 };
1255
1256 MODULE_DEVICE_TABLE(pci, serial_txx9_pci_tbl);
1257 #endif /* ENABLE_SERIAL_TXX9_PCI */
1258
1259 static struct platform_device *serial_txx9_plat_devs;
1260
1261 static int __init serial_txx9_init(void)
1262 {
1263 int ret;
1264
1265 printk(KERN_INFO "%s version %s\n", serial_name, serial_version);
1266
1267 ret = uart_register_driver(&serial_txx9_reg);
1268 if (ret)
1269 goto out;
1270
1271 serial_txx9_plat_devs = platform_device_alloc("serial_txx9", -1);
1272 if (!serial_txx9_plat_devs) {
1273 ret = -ENOMEM;
1274 goto unreg_uart_drv;
1275 }
1276
1277 ret = platform_device_add(serial_txx9_plat_devs);
1278 if (ret)
1279 goto put_dev;
1280
1281 serial_txx9_register_ports(&serial_txx9_reg,
1282 &serial_txx9_plat_devs->dev);
1283
1284 ret = platform_driver_register(&serial_txx9_plat_driver);
1285 if (ret)
1286 goto del_dev;
1287
1288 #ifdef ENABLE_SERIAL_TXX9_PCI
1289 ret = pci_register_driver(&serial_txx9_pci_driver);
1290 #endif
1291 if (ret == 0)
1292 goto out;
1293
1294 del_dev:
1295 platform_device_del(serial_txx9_plat_devs);
1296 put_dev:
1297 platform_device_put(serial_txx9_plat_devs);
1298 unreg_uart_drv:
1299 uart_unregister_driver(&serial_txx9_reg);
1300 out:
1301 return ret;
1302 }
1303
1304 static void __exit serial_txx9_exit(void)
1305 {
1306 int i;
1307
1308 #ifdef ENABLE_SERIAL_TXX9_PCI
1309 pci_unregister_driver(&serial_txx9_pci_driver);
1310 #endif
1311 platform_driver_unregister(&serial_txx9_plat_driver);
1312 platform_device_unregister(serial_txx9_plat_devs);
1313 for (i = 0; i < UART_NR; i++) {
1314 struct uart_txx9_port *up = &serial_txx9_ports[i];
1315 if (up->port.iobase || up->port.mapbase)
1316 uart_remove_one_port(&serial_txx9_reg, &up->port);
1317 }
1318
1319 uart_unregister_driver(&serial_txx9_reg);
1320 }
1321
1322 module_init(serial_txx9_init);
1323 module_exit(serial_txx9_exit);
1324
1325 MODULE_LICENSE("GPL");
1326 MODULE_DESCRIPTION("TX39/49 serial driver");
1327
1328 MODULE_ALIAS_CHARDEV_MAJOR(TXX9_TTY_MAJOR);
Linux with added FPC-III support