?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / tty / synclink.c
blob657eed82eeb372d96e5f480bae3eb7c92dee06fa
1 /*
2 * $Id: synclink.c,v 4.38 2005/11/07 16:30:34 paulkf Exp $
3 *
4 * Device driver for Microgate SyncLink ISA and PCI
5 * high speed multiprotocol serial adapters.
6 *
7 * written by Paul Fulghum for Microgate Corporation
8 * paulkf@microgate.com
9 *
10 * Microgate and SyncLink are trademarks of Microgate Corporation
11 *
12 * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
13 *
14 * Original release 01/11/99
15 *
16 * This code is released under the GNU General Public License (GPL)
17 *
18 * This driver is primarily intended for use in synchronous
19 * HDLC mode. Asynchronous mode is also provided.
20 *
21 * When operating in synchronous mode, each call to mgsl_write()
22 * contains exactly one complete HDLC frame. Calling mgsl_put_char
23 * will start assembling an HDLC frame that will not be sent until
24 * mgsl_flush_chars or mgsl_write is called.
25 *
26 * Synchronous receive data is reported as complete frames. To accomplish
27 * this, the TTY flip buffer is bypassed (too small to hold largest
28 * frame and may fragment frames) and the line discipline
29 * receive entry point is called directly.
30 *
31 * This driver has been tested with a slightly modified ppp.c driver
32 * for synchronous PPP.
33 *
34 * 2000/02/16
35 * Added interface for syncppp.c driver (an alternate synchronous PPP
36 * implementation that also supports Cisco HDLC). Each device instance
37 * registers as a tty device AND a network device (if dosyncppp option
38 * is set for the device). The functionality is determined by which
39 * device interface is opened.
40 *
41 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
42 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
43 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
44 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
45 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
46 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
47 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
48 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
49 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
50 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
51 * OF THE POSSIBILITY OF SUCH DAMAGE.
52 */
53
54 #if defined(__i386__)
55 # define BREAKPOINT() asm(" int $3");
56 #else
57 # define BREAKPOINT() { }
58 #endif
59
60 #define MAX_ISA_DEVICES 10
61 #define MAX_PCI_DEVICES 10
62 #define MAX_TOTAL_DEVICES 20
63
64 #include <linux/module.h>
65 #include <linux/errno.h>
66 #include <linux/signal.h>
67 #include <linux/sched.h>
68 #include <linux/timer.h>
69 #include <linux/interrupt.h>
70 #include <linux/pci.h>
71 #include <linux/tty.h>
72 #include <linux/tty_flip.h>
73 #include <linux/serial.h>
74 #include <linux/major.h>
75 #include <linux/string.h>
76 #include <linux/fcntl.h>
77 #include <linux/ptrace.h>
78 #include <linux/ioport.h>
79 #include <linux/mm.h>
80 #include <linux/seq_file.h>
81 #include <linux/slab.h>
82 #include <linux/delay.h>
83 #include <linux/netdevice.h>
84 #include <linux/vmalloc.h>
85 #include <linux/init.h>
86 #include <linux/ioctl.h>
87 #include <linux/synclink.h>
88
89 #include <asm/io.h>
90 #include <asm/irq.h>
91 #include <asm/dma.h>
92 #include <linux/bitops.h>
93 #include <asm/types.h>
94 #include <linux/termios.h>
95 #include <linux/workqueue.h>
96 #include <linux/hdlc.h>
97 #include <linux/dma-mapping.h>
98
99 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_MODULE))
100 #define SYNCLINK_GENERIC_HDLC 1
101 #else
102 #define SYNCLINK_GENERIC_HDLC 0
103 #endif
104
105 #define GET_USER(error,value,addr) error = get_user(value,addr)
106 #define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
107 #define PUT_USER(error,value,addr) error = put_user(value,addr)
108 #define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
109
110 #include <linux/uaccess.h>
111
112 #define RCLRVALUE 0xffff
113
114 static MGSL_PARAMS default_params = {
115 MGSL_MODE_HDLC, /* unsigned long mode */
116 0, /* unsigned char loopback; */
117 HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
118 HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
119 0, /* unsigned long clock_speed; */
120 0xff, /* unsigned char addr_filter; */
121 HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
122 HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
123 HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
124 9600, /* unsigned long data_rate; */
125 8, /* unsigned char data_bits; */
126 1, /* unsigned char stop_bits; */
127 ASYNC_PARITY_NONE /* unsigned char parity; */
128 };
129
130 #define SHARED_MEM_ADDRESS_SIZE 0x40000
131 #define BUFFERLISTSIZE 4096
132 #define DMABUFFERSIZE 4096
133 #define MAXRXFRAMES 7
134
135 typedef struct _DMABUFFERENTRY
136 {
137 u32 phys_addr; /* 32-bit flat physical address of data buffer */
138 volatile u16 count; /* buffer size/data count */
139 volatile u16 status; /* Control/status field */
140 volatile u16 rcc; /* character count field */
141 u16 reserved; /* padding required by 16C32 */
142 u32 link; /* 32-bit flat link to next buffer entry */
143 char *virt_addr; /* virtual address of data buffer */
144 u32 phys_entry; /* physical address of this buffer entry */
145 dma_addr_t dma_addr;
146 } DMABUFFERENTRY, *DMAPBUFFERENTRY;
147
148 /* The queue of BH actions to be performed */
149
150 #define BH_RECEIVE 1
151 #define BH_TRANSMIT 2
152 #define BH_STATUS 4
153
154 #define IO_PIN_SHUTDOWN_LIMIT 100
155
156 struct _input_signal_events {
157 int ri_up;
158 int ri_down;
159 int dsr_up;
160 int dsr_down;
161 int dcd_up;
162 int dcd_down;
163 int cts_up;
164 int cts_down;
165 };
166
167 /* transmit holding buffer definitions*/
168 #define MAX_TX_HOLDING_BUFFERS 5
169 struct tx_holding_buffer {
170 int buffer_size;
171 unsigned char * buffer;
172 };
173
174
175 /*
176 * Device instance data structure
177 */
178
179 struct mgsl_struct {
180 int magic;
181 struct tty_port port;
182 int line;
183 int hw_version;
184
185 struct mgsl_icount icount;
186
187 int timeout;
188 int x_char; /* xon/xoff character */
189 u16 read_status_mask;
190 u16 ignore_status_mask;
191 unsigned char *xmit_buf;
192 int xmit_head;
193 int xmit_tail;
194 int xmit_cnt;
195
196 wait_queue_head_t status_event_wait_q;
197 wait_queue_head_t event_wait_q;
198 struct timer_list tx_timer; /* HDLC transmit timeout timer */
199 struct mgsl_struct *next_device; /* device list link */
200
201 spinlock_t irq_spinlock; /* spinlock for synchronizing with ISR */
202 struct work_struct task; /* task structure for scheduling bh */
203
204 u32 EventMask; /* event trigger mask */
205 u32 RecordedEvents; /* pending events */
206
207 u32 max_frame_size; /* as set by device config */
208
209 u32 pending_bh;
210
211 bool bh_running; /* Protection from multiple */
212 int isr_overflow;
213 bool bh_requested;
214
215 int dcd_chkcount; /* check counts to prevent */
216 int cts_chkcount; /* too many IRQs if a signal */
217 int dsr_chkcount; /* is floating */
218 int ri_chkcount;
219
220 char *buffer_list; /* virtual address of Rx & Tx buffer lists */
221 u32 buffer_list_phys;
222 dma_addr_t buffer_list_dma_addr;
223
224 unsigned int rx_buffer_count; /* count of total allocated Rx buffers */
225 DMABUFFERENTRY *rx_buffer_list; /* list of receive buffer entries */
226 unsigned int current_rx_buffer;
227
228 int num_tx_dma_buffers; /* number of tx dma frames required */
229 int tx_dma_buffers_used;
230 unsigned int tx_buffer_count; /* count of total allocated Tx buffers */
231 DMABUFFERENTRY *tx_buffer_list; /* list of transmit buffer entries */
232 int start_tx_dma_buffer; /* tx dma buffer to start tx dma operation */
233 int current_tx_buffer; /* next tx dma buffer to be loaded */
234
235 unsigned char *intermediate_rxbuffer;
236
237 int num_tx_holding_buffers; /* number of tx holding buffer allocated */
238 int get_tx_holding_index; /* next tx holding buffer for adapter to load */
239 int put_tx_holding_index; /* next tx holding buffer to store user request */
240 int tx_holding_count; /* number of tx holding buffers waiting */
241 struct tx_holding_buffer tx_holding_buffers[MAX_TX_HOLDING_BUFFERS];
242
243 bool rx_enabled;
244 bool rx_overflow;
245 bool rx_rcc_underrun;
246
247 bool tx_enabled;
248 bool tx_active;
249 u32 idle_mode;
250
251 u16 cmr_value;
252 u16 tcsr_value;
253
254 char device_name[25]; /* device instance name */
255
256 unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */
257 unsigned char bus; /* expansion bus number (zero based) */
258 unsigned char function; /* PCI device number */
259
260 unsigned int io_base; /* base I/O address of adapter */
261 unsigned int io_addr_size; /* size of the I/O address range */
262 bool io_addr_requested; /* true if I/O address requested */
263
264 unsigned int irq_level; /* interrupt level */
265 unsigned long irq_flags;
266 bool irq_requested; /* true if IRQ requested */
267
268 unsigned int dma_level; /* DMA channel */
269 bool dma_requested; /* true if dma channel requested */
270
271 u16 mbre_bit;
272 u16 loopback_bits;
273 u16 usc_idle_mode;
274
275 MGSL_PARAMS params; /* communications parameters */
276
277 unsigned char serial_signals; /* current serial signal states */
278
279 bool irq_occurred; /* for diagnostics use */
280 unsigned int init_error; /* Initialization startup error (DIAGS) */
281 int fDiagnosticsmode; /* Driver in Diagnostic mode? (DIAGS) */
282
283 u32 last_mem_alloc;
284 unsigned char* memory_base; /* shared memory address (PCI only) */
285 u32 phys_memory_base;
286 bool shared_mem_requested;
287
288 unsigned char* lcr_base; /* local config registers (PCI only) */
289 u32 phys_lcr_base;
290 u32 lcr_offset;
291 bool lcr_mem_requested;
292
293 u32 misc_ctrl_value;
294 char *flag_buf;
295 bool drop_rts_on_tx_done;
296
297 bool loopmode_insert_requested;
298 bool loopmode_send_done_requested;
299
300 struct _input_signal_events input_signal_events;
301
302 /* generic HDLC device parts */
303 int netcount;
304 spinlock_t netlock;
305
306 #if SYNCLINK_GENERIC_HDLC
307 struct net_device *netdev;
308 #endif
309 };
310
311 #define MGSL_MAGIC 0x5401
312
313 /*
314 * The size of the serial xmit buffer is 1 page, or 4096 bytes
315 */
316 #ifndef SERIAL_XMIT_SIZE
317 #define SERIAL_XMIT_SIZE 4096
318 #endif
319
320 /*
321 * These macros define the offsets used in calculating the
322 * I/O address of the specified USC registers.
323 */
324
325
326 #define DCPIN 2 /* Bit 1 of I/O address */
327 #define SDPIN 4 /* Bit 2 of I/O address */
328
329 #define DCAR 0 /* DMA command/address register */
330 #define CCAR SDPIN /* channel command/address register */
331 #define DATAREG DCPIN + SDPIN /* serial data register */
332 #define MSBONLY 0x41
333 #define LSBONLY 0x40
334
335 /*
336 * These macros define the register address (ordinal number)
337 * used for writing address/value pairs to the USC.
338 */
339
340 #define CMR 0x02 /* Channel mode Register */
341 #define CCSR 0x04 /* Channel Command/status Register */
342 #define CCR 0x06 /* Channel Control Register */
343 #define PSR 0x08 /* Port status Register */
344 #define PCR 0x0a /* Port Control Register */
345 #define TMDR 0x0c /* Test mode Data Register */
346 #define TMCR 0x0e /* Test mode Control Register */
347 #define CMCR 0x10 /* Clock mode Control Register */
348 #define HCR 0x12 /* Hardware Configuration Register */
349 #define IVR 0x14 /* Interrupt Vector Register */
350 #define IOCR 0x16 /* Input/Output Control Register */
351 #define ICR 0x18 /* Interrupt Control Register */
352 #define DCCR 0x1a /* Daisy Chain Control Register */
353 #define MISR 0x1c /* Misc Interrupt status Register */
354 #define SICR 0x1e /* status Interrupt Control Register */
355 #define RDR 0x20 /* Receive Data Register */
356 #define RMR 0x22 /* Receive mode Register */
357 #define RCSR 0x24 /* Receive Command/status Register */
358 #define RICR 0x26 /* Receive Interrupt Control Register */
359 #define RSR 0x28 /* Receive Sync Register */
360 #define RCLR 0x2a /* Receive count Limit Register */
361 #define RCCR 0x2c /* Receive Character count Register */
362 #define TC0R 0x2e /* Time Constant 0 Register */
363 #define TDR 0x30 /* Transmit Data Register */
364 #define TMR 0x32 /* Transmit mode Register */
365 #define TCSR 0x34 /* Transmit Command/status Register */
366 #define TICR 0x36 /* Transmit Interrupt Control Register */
367 #define TSR 0x38 /* Transmit Sync Register */
368 #define TCLR 0x3a /* Transmit count Limit Register */
369 #define TCCR 0x3c /* Transmit Character count Register */
370 #define TC1R 0x3e /* Time Constant 1 Register */
371
372
373 /*
374 * MACRO DEFINITIONS FOR DMA REGISTERS
375 */
376
377 #define DCR 0x06 /* DMA Control Register (shared) */
378 #define DACR 0x08 /* DMA Array count Register (shared) */
379 #define BDCR 0x12 /* Burst/Dwell Control Register (shared) */
380 #define DIVR 0x14 /* DMA Interrupt Vector Register (shared) */
381 #define DICR 0x18 /* DMA Interrupt Control Register (shared) */
382 #define CDIR 0x1a /* Clear DMA Interrupt Register (shared) */
383 #define SDIR 0x1c /* Set DMA Interrupt Register (shared) */
384
385 #define TDMR 0x02 /* Transmit DMA mode Register */
386 #define TDIAR 0x1e /* Transmit DMA Interrupt Arm Register */
387 #define TBCR 0x2a /* Transmit Byte count Register */
388 #define TARL 0x2c /* Transmit Address Register (low) */
389 #define TARU 0x2e /* Transmit Address Register (high) */
390 #define NTBCR 0x3a /* Next Transmit Byte count Register */
391 #define NTARL 0x3c /* Next Transmit Address Register (low) */
392 #define NTARU 0x3e /* Next Transmit Address Register (high) */
393
394 #define RDMR 0x82 /* Receive DMA mode Register (non-shared) */
395 #define RDIAR 0x9e /* Receive DMA Interrupt Arm Register */
396 #define RBCR 0xaa /* Receive Byte count Register */
397 #define RARL 0xac /* Receive Address Register (low) */
398 #define RARU 0xae /* Receive Address Register (high) */
399 #define NRBCR 0xba /* Next Receive Byte count Register */
400 #define NRARL 0xbc /* Next Receive Address Register (low) */
401 #define NRARU 0xbe /* Next Receive Address Register (high) */
402
403
404 /*
405 * MACRO DEFINITIONS FOR MODEM STATUS BITS
406 */
407
408 #define MODEMSTATUS_DTR 0x80
409 #define MODEMSTATUS_DSR 0x40
410 #define MODEMSTATUS_RTS 0x20
411 #define MODEMSTATUS_CTS 0x10
412 #define MODEMSTATUS_RI 0x04
413 #define MODEMSTATUS_DCD 0x01
414
415
416 /*
417 * Channel Command/Address Register (CCAR) Command Codes
418 */
419
420 #define RTCmd_Null 0x0000
421 #define RTCmd_ResetHighestIus 0x1000
422 #define RTCmd_TriggerChannelLoadDma 0x2000
423 #define RTCmd_TriggerRxDma 0x2800
424 #define RTCmd_TriggerTxDma 0x3000
425 #define RTCmd_TriggerRxAndTxDma 0x3800
426 #define RTCmd_PurgeRxFifo 0x4800
427 #define RTCmd_PurgeTxFifo 0x5000
428 #define RTCmd_PurgeRxAndTxFifo 0x5800
429 #define RTCmd_LoadRcc 0x6800
430 #define RTCmd_LoadTcc 0x7000
431 #define RTCmd_LoadRccAndTcc 0x7800
432 #define RTCmd_LoadTC0 0x8800
433 #define RTCmd_LoadTC1 0x9000
434 #define RTCmd_LoadTC0AndTC1 0x9800
435 #define RTCmd_SerialDataLSBFirst 0xa000
436 #define RTCmd_SerialDataMSBFirst 0xa800
437 #define RTCmd_SelectBigEndian 0xb000
438 #define RTCmd_SelectLittleEndian 0xb800
439
440
441 /*
442 * DMA Command/Address Register (DCAR) Command Codes
443 */
444
445 #define DmaCmd_Null 0x0000
446 #define DmaCmd_ResetTxChannel 0x1000
447 #define DmaCmd_ResetRxChannel 0x1200
448 #define DmaCmd_StartTxChannel 0x2000
449 #define DmaCmd_StartRxChannel 0x2200
450 #define DmaCmd_ContinueTxChannel 0x3000
451 #define DmaCmd_ContinueRxChannel 0x3200
452 #define DmaCmd_PauseTxChannel 0x4000
453 #define DmaCmd_PauseRxChannel 0x4200
454 #define DmaCmd_AbortTxChannel 0x5000
455 #define DmaCmd_AbortRxChannel 0x5200
456 #define DmaCmd_InitTxChannel 0x7000
457 #define DmaCmd_InitRxChannel 0x7200
458 #define DmaCmd_ResetHighestDmaIus 0x8000
459 #define DmaCmd_ResetAllChannels 0x9000
460 #define DmaCmd_StartAllChannels 0xa000
461 #define DmaCmd_ContinueAllChannels 0xb000
462 #define DmaCmd_PauseAllChannels 0xc000
463 #define DmaCmd_AbortAllChannels 0xd000
464 #define DmaCmd_InitAllChannels 0xf000
465
466 #define TCmd_Null 0x0000
467 #define TCmd_ClearTxCRC 0x2000
468 #define TCmd_SelectTicrTtsaData 0x4000
469 #define TCmd_SelectTicrTxFifostatus 0x5000
470 #define TCmd_SelectTicrIntLevel 0x6000
471 #define TCmd_SelectTicrdma_level 0x7000
472 #define TCmd_SendFrame 0x8000
473 #define TCmd_SendAbort 0x9000
474 #define TCmd_EnableDleInsertion 0xc000
475 #define TCmd_DisableDleInsertion 0xd000
476 #define TCmd_ClearEofEom 0xe000
477 #define TCmd_SetEofEom 0xf000
478
479 #define RCmd_Null 0x0000
480 #define RCmd_ClearRxCRC 0x2000
481 #define RCmd_EnterHuntmode 0x3000
482 #define RCmd_SelectRicrRtsaData 0x4000
483 #define RCmd_SelectRicrRxFifostatus 0x5000
484 #define RCmd_SelectRicrIntLevel 0x6000
485 #define RCmd_SelectRicrdma_level 0x7000
486
487 /*
488 * Bits for enabling and disabling IRQs in Interrupt Control Register (ICR)
489 */
490
491 #define RECEIVE_STATUS BIT5
492 #define RECEIVE_DATA BIT4
493 #define TRANSMIT_STATUS BIT3
494 #define TRANSMIT_DATA BIT2
495 #define IO_PIN BIT1
496 #define MISC BIT0
497
498
499 /*
500 * Receive status Bits in Receive Command/status Register RCSR
501 */
502
503 #define RXSTATUS_SHORT_FRAME BIT8
504 #define RXSTATUS_CODE_VIOLATION BIT8
505 #define RXSTATUS_EXITED_HUNT BIT7
506 #define RXSTATUS_IDLE_RECEIVED BIT6
507 #define RXSTATUS_BREAK_RECEIVED BIT5
508 #define RXSTATUS_ABORT_RECEIVED BIT5
509 #define RXSTATUS_RXBOUND BIT4
510 #define RXSTATUS_CRC_ERROR BIT3
511 #define RXSTATUS_FRAMING_ERROR BIT3
512 #define RXSTATUS_ABORT BIT2
513 #define RXSTATUS_PARITY_ERROR BIT2
514 #define RXSTATUS_OVERRUN BIT1
515 #define RXSTATUS_DATA_AVAILABLE BIT0
516 #define RXSTATUS_ALL 0x01f6
517 #define usc_UnlatchRxstatusBits(a,b) usc_OutReg( (a), RCSR, (u16)((b) & RXSTATUS_ALL) )
518
519 /*
520 * Values for setting transmit idle mode in
521 * Transmit Control/status Register (TCSR)
522 */
523 #define IDLEMODE_FLAGS 0x0000
524 #define IDLEMODE_ALT_ONE_ZERO 0x0100
525 #define IDLEMODE_ZERO 0x0200
526 #define IDLEMODE_ONE 0x0300
527 #define IDLEMODE_ALT_MARK_SPACE 0x0500
528 #define IDLEMODE_SPACE 0x0600
529 #define IDLEMODE_MARK 0x0700
530 #define IDLEMODE_MASK 0x0700
531
532 /*
533 * IUSC revision identifiers
534 */
535 #define IUSC_SL1660 0x4d44
536 #define IUSC_PRE_SL1660 0x4553
537
538 /*
539 * Transmit status Bits in Transmit Command/status Register (TCSR)
540 */
541
542 #define TCSR_PRESERVE 0x0F00
543
544 #define TCSR_UNDERWAIT BIT11
545 #define TXSTATUS_PREAMBLE_SENT BIT7
546 #define TXSTATUS_IDLE_SENT BIT6
547 #define TXSTATUS_ABORT_SENT BIT5
548 #define TXSTATUS_EOF_SENT BIT4
549 #define TXSTATUS_EOM_SENT BIT4
550 #define TXSTATUS_CRC_SENT BIT3
551 #define TXSTATUS_ALL_SENT BIT2
552 #define TXSTATUS_UNDERRUN BIT1
553 #define TXSTATUS_FIFO_EMPTY BIT0
554 #define TXSTATUS_ALL 0x00fa
555 #define usc_UnlatchTxstatusBits(a,b) usc_OutReg( (a), TCSR, (u16)((a)->tcsr_value + ((b) & 0x00FF)) )
556
557
558 #define MISCSTATUS_RXC_LATCHED BIT15
559 #define MISCSTATUS_RXC BIT14
560 #define MISCSTATUS_TXC_LATCHED BIT13
561 #define MISCSTATUS_TXC BIT12
562 #define MISCSTATUS_RI_LATCHED BIT11
563 #define MISCSTATUS_RI BIT10
564 #define MISCSTATUS_DSR_LATCHED BIT9
565 #define MISCSTATUS_DSR BIT8
566 #define MISCSTATUS_DCD_LATCHED BIT7
567 #define MISCSTATUS_DCD BIT6
568 #define MISCSTATUS_CTS_LATCHED BIT5
569 #define MISCSTATUS_CTS BIT4
570 #define MISCSTATUS_RCC_UNDERRUN BIT3
571 #define MISCSTATUS_DPLL_NO_SYNC BIT2
572 #define MISCSTATUS_BRG1_ZERO BIT1
573 #define MISCSTATUS_BRG0_ZERO BIT0
574
575 #define usc_UnlatchIostatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0xaaa0))
576 #define usc_UnlatchMiscstatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0x000f))
577
578 #define SICR_RXC_ACTIVE BIT15
579 #define SICR_RXC_INACTIVE BIT14
580 #define SICR_RXC (BIT15|BIT14)
581 #define SICR_TXC_ACTIVE BIT13
582 #define SICR_TXC_INACTIVE BIT12
583 #define SICR_TXC (BIT13|BIT12)
584 #define SICR_RI_ACTIVE BIT11
585 #define SICR_RI_INACTIVE BIT10
586 #define SICR_RI (BIT11|BIT10)
587 #define SICR_DSR_ACTIVE BIT9
588 #define SICR_DSR_INACTIVE BIT8
589 #define SICR_DSR (BIT9|BIT8)
590 #define SICR_DCD_ACTIVE BIT7
591 #define SICR_DCD_INACTIVE BIT6
592 #define SICR_DCD (BIT7|BIT6)
593 #define SICR_CTS_ACTIVE BIT5
594 #define SICR_CTS_INACTIVE BIT4
595 #define SICR_CTS (BIT5|BIT4)
596 #define SICR_RCC_UNDERFLOW BIT3
597 #define SICR_DPLL_NO_SYNC BIT2
598 #define SICR_BRG1_ZERO BIT1
599 #define SICR_BRG0_ZERO BIT0
600
601 void usc_DisableMasterIrqBit( struct mgsl_struct *info );
602 void usc_EnableMasterIrqBit( struct mgsl_struct *info );
603 void usc_EnableInterrupts( struct mgsl_struct *info, u16 IrqMask );
604 void usc_DisableInterrupts( struct mgsl_struct *info, u16 IrqMask );
605 void usc_ClearIrqPendingBits( struct mgsl_struct *info, u16 IrqMask );
606
607 #define usc_EnableInterrupts( a, b ) \
608 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0xc0 + (b)) )
609
610 #define usc_DisableInterrupts( a, b ) \
611 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0x80 + (b)) )
612
613 #define usc_EnableMasterIrqBit(a) \
614 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0x0f00) + 0xb000) )
615
616 #define usc_DisableMasterIrqBit(a) \
617 usc_OutReg( (a), ICR, (u16)(usc_InReg((a),ICR) & 0x7f00) )
618
619 #define usc_ClearIrqPendingBits( a, b ) usc_OutReg( (a), DCCR, 0x40 + (b) )
620
621 /*
622 * Transmit status Bits in Transmit Control status Register (TCSR)
623 * and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0)
624 */
625
626 #define TXSTATUS_PREAMBLE_SENT BIT7
627 #define TXSTATUS_IDLE_SENT BIT6
628 #define TXSTATUS_ABORT_SENT BIT5
629 #define TXSTATUS_EOF BIT4
630 #define TXSTATUS_CRC_SENT BIT3
631 #define TXSTATUS_ALL_SENT BIT2
632 #define TXSTATUS_UNDERRUN BIT1
633 #define TXSTATUS_FIFO_EMPTY BIT0
634
635 #define DICR_MASTER BIT15
636 #define DICR_TRANSMIT BIT0
637 #define DICR_RECEIVE BIT1
638
639 #define usc_EnableDmaInterrupts(a,b) \
640 usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) | (b)) )
641
642 #define usc_DisableDmaInterrupts(a,b) \
643 usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) & ~(b)) )
644
645 #define usc_EnableStatusIrqs(a,b) \
646 usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) | (b)) )
647
648 #define usc_DisablestatusIrqs(a,b) \
649 usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) & ~(b)) )
650
651 /* Transmit status Bits in Transmit Control status Register (TCSR) */
652 /* and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) */
653
654
655 #define DISABLE_UNCONDITIONAL 0
656 #define DISABLE_END_OF_FRAME 1
657 #define ENABLE_UNCONDITIONAL 2
658 #define ENABLE_AUTO_CTS 3
659 #define ENABLE_AUTO_DCD 3
660 #define usc_EnableTransmitter(a,b) \
661 usc_OutReg( (a), TMR, (u16)((usc_InReg((a),TMR) & 0xfffc) | (b)) )
662 #define usc_EnableReceiver(a,b) \
663 usc_OutReg( (a), RMR, (u16)((usc_InReg((a),RMR) & 0xfffc) | (b)) )
664
665 static u16 usc_InDmaReg( struct mgsl_struct *info, u16 Port );
666 static void usc_OutDmaReg( struct mgsl_struct *info, u16 Port, u16 Value );
667 static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd );
668
669 static u16 usc_InReg( struct mgsl_struct *info, u16 Port );
670 static void usc_OutReg( struct mgsl_struct *info, u16 Port, u16 Value );
671 static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd );
672 void usc_RCmd( struct mgsl_struct *info, u16 Cmd );
673 void usc_TCmd( struct mgsl_struct *info, u16 Cmd );
674
675 #define usc_TCmd(a,b) usc_OutReg((a), TCSR, (u16)((a)->tcsr_value + (b)))
676 #define usc_RCmd(a,b) usc_OutReg((a), RCSR, (b))
677
678 #define usc_SetTransmitSyncChars(a,s0,s1) usc_OutReg((a), TSR, (u16)(((u16)s0<<8)|(u16)s1))
679
680 static void usc_process_rxoverrun_sync( struct mgsl_struct *info );
681 static void usc_start_receiver( struct mgsl_struct *info );
682 static void usc_stop_receiver( struct mgsl_struct *info );
683
684 static void usc_start_transmitter( struct mgsl_struct *info );
685 static void usc_stop_transmitter( struct mgsl_struct *info );
686 static void usc_set_txidle( struct mgsl_struct *info );
687 static void usc_load_txfifo( struct mgsl_struct *info );
688
689 static void usc_enable_aux_clock( struct mgsl_struct *info, u32 DataRate );
690 static void usc_enable_loopback( struct mgsl_struct *info, int enable );
691
692 static void usc_get_serial_signals( struct mgsl_struct *info );
693 static void usc_set_serial_signals( struct mgsl_struct *info );
694
695 static void usc_reset( struct mgsl_struct *info );
696
697 static void usc_set_sync_mode( struct mgsl_struct *info );
698 static void usc_set_sdlc_mode( struct mgsl_struct *info );
699 static void usc_set_async_mode( struct mgsl_struct *info );
700 static void usc_enable_async_clock( struct mgsl_struct *info, u32 DataRate );
701
702 static void usc_loopback_frame( struct mgsl_struct *info );
703
704 static void mgsl_tx_timeout(unsigned long context);
705
706
707 static void usc_loopmode_cancel_transmit( struct mgsl_struct * info );
708 static void usc_loopmode_insert_request( struct mgsl_struct * info );
709 static int usc_loopmode_active( struct mgsl_struct * info);
710 static void usc_loopmode_send_done( struct mgsl_struct * info );
711
712 static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg);
713
714 #if SYNCLINK_GENERIC_HDLC
715 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
716 static void hdlcdev_tx_done(struct mgsl_struct *info);
717 static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size);
718 static int hdlcdev_init(struct mgsl_struct *info);
719 static void hdlcdev_exit(struct mgsl_struct *info);
720 #endif
721
722 /*
723 * Defines a BUS descriptor value for the PCI adapter
724 * local bus address ranges.
725 */
726
727 #define BUS_DESCRIPTOR( WrHold, WrDly, RdDly, Nwdd, Nwad, Nxda, Nrdd, Nrad ) \
728 (0x00400020 + \
729 ((WrHold) << 30) + \
730 ((WrDly) << 28) + \
731 ((RdDly) << 26) + \
732 ((Nwdd) << 20) + \
733 ((Nwad) << 15) + \
734 ((Nxda) << 13) + \
735 ((Nrdd) << 11) + \
736 ((Nrad) << 6) )
737
738 static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit);
739
740 /*
741 * Adapter diagnostic routines
742 */
743 static bool mgsl_register_test( struct mgsl_struct *info );
744 static bool mgsl_irq_test( struct mgsl_struct *info );
745 static bool mgsl_dma_test( struct mgsl_struct *info );
746 static bool mgsl_memory_test( struct mgsl_struct *info );
747 static int mgsl_adapter_test( struct mgsl_struct *info );
748
749 /*
750 * device and resource management routines
751 */
752 static int mgsl_claim_resources(struct mgsl_struct *info);
753 static void mgsl_release_resources(struct mgsl_struct *info);
754 static void mgsl_add_device(struct mgsl_struct *info);
755 static struct mgsl_struct* mgsl_allocate_device(void);
756
757 /*
758 * DMA buffer manupulation functions.
759 */
760 static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex );
761 static bool mgsl_get_rx_frame( struct mgsl_struct *info );
762 static bool mgsl_get_raw_rx_frame( struct mgsl_struct *info );
763 static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info );
764 static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info );
765 static int num_free_tx_dma_buffers(struct mgsl_struct *info);
766 static void mgsl_load_tx_dma_buffer( struct mgsl_struct *info, const char *Buffer, unsigned int BufferSize);
767 static void mgsl_load_pci_memory(char* TargetPtr, const char* SourcePtr, unsigned short count);
768
769 /*
770 * DMA and Shared Memory buffer allocation and formatting
771 */
772 static int mgsl_allocate_dma_buffers(struct mgsl_struct *info);
773 static void mgsl_free_dma_buffers(struct mgsl_struct *info);
774 static int mgsl_alloc_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
775 static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
776 static int mgsl_alloc_buffer_list_memory(struct mgsl_struct *info);
777 static void mgsl_free_buffer_list_memory(struct mgsl_struct *info);
778 static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info);
779 static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info);
780 static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info);
781 static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info);
782 static bool load_next_tx_holding_buffer(struct mgsl_struct *info);
783 static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize);
784
785 /*
786 * Bottom half interrupt handlers
787 */
788 static void mgsl_bh_handler(struct work_struct *work);
789 static void mgsl_bh_receive(struct mgsl_struct *info);
790 static void mgsl_bh_transmit(struct mgsl_struct *info);
791 static void mgsl_bh_status(struct mgsl_struct *info);
792
793 /*
794 * Interrupt handler routines and dispatch table.
795 */
796 static void mgsl_isr_null( struct mgsl_struct *info );
797 static void mgsl_isr_transmit_data( struct mgsl_struct *info );
798 static void mgsl_isr_receive_data( struct mgsl_struct *info );
799 static void mgsl_isr_receive_status( struct mgsl_struct *info );
800 static void mgsl_isr_transmit_status( struct mgsl_struct *info );
801 static void mgsl_isr_io_pin( struct mgsl_struct *info );
802 static void mgsl_isr_misc( struct mgsl_struct *info );
803 static void mgsl_isr_receive_dma( struct mgsl_struct *info );
804 static void mgsl_isr_transmit_dma( struct mgsl_struct *info );
805
806 typedef void (*isr_dispatch_func)(struct mgsl_struct *);
807
808 static isr_dispatch_func UscIsrTable[7] =
809 {
810 mgsl_isr_null,
811 mgsl_isr_misc,
812 mgsl_isr_io_pin,
813 mgsl_isr_transmit_data,
814 mgsl_isr_transmit_status,
815 mgsl_isr_receive_data,
816 mgsl_isr_receive_status
817 };
818
819 /*
820 * ioctl call handlers
821 */
822 static int tiocmget(struct tty_struct *tty);
823 static int tiocmset(struct tty_struct *tty,
824 unsigned int set, unsigned int clear);
825 static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount
826 __user *user_icount);
827 static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params);
828 static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params);
829 static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode);
830 static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode);
831 static int mgsl_txenable(struct mgsl_struct * info, int enable);
832 static int mgsl_txabort(struct mgsl_struct * info);
833 static int mgsl_rxenable(struct mgsl_struct * info, int enable);
834 static int mgsl_wait_event(struct mgsl_struct * info, int __user *mask);
835 static int mgsl_loopmode_send_done( struct mgsl_struct * info );
836
837 /* set non-zero on successful registration with PCI subsystem */
838 static bool pci_registered;
839
840 /*
841 * Global linked list of SyncLink devices
842 */
843 static struct mgsl_struct *mgsl_device_list;
844 static int mgsl_device_count;
845
846 /*
847 * Set this param to non-zero to load eax with the
848 * .text section address and breakpoint on module load.
849 * This is useful for use with gdb and add-symbol-file command.
850 */
851 static bool break_on_load;
852
853 /*
854 * Driver major number, defaults to zero to get auto
855 * assigned major number. May be forced as module parameter.
856 */
857 static int ttymajor;
858
859 /*
860 * Array of user specified options for ISA adapters.
861 */
862 static int io[MAX_ISA_DEVICES];
863 static int irq[MAX_ISA_DEVICES];
864 static int dma[MAX_ISA_DEVICES];
865 static int debug_level;
866 static int maxframe[MAX_TOTAL_DEVICES];
867 static int txdmabufs[MAX_TOTAL_DEVICES];
868 static int txholdbufs[MAX_TOTAL_DEVICES];
869
870 module_param(break_on_load, bool, 0);
871 module_param(ttymajor, int, 0);
872 module_param_array(io, int, NULL, 0);
873 module_param_array(irq, int, NULL, 0);
874 module_param_array(dma, int, NULL, 0);
875 module_param(debug_level, int, 0);
876 module_param_array(maxframe, int, NULL, 0);
877 module_param_array(txdmabufs, int, NULL, 0);
878 module_param_array(txholdbufs, int, NULL, 0);
879
880 static char *driver_name = "SyncLink serial driver";
881 static char *driver_version = "$Revision: 4.38 $";
882
883 static int synclink_init_one (struct pci_dev *dev,
884 const struct pci_device_id *ent);
885 static void synclink_remove_one (struct pci_dev *dev);
886
887 static struct pci_device_id synclink_pci_tbl[] = {
888 { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, },
889 { PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, },
890 { 0, }, /* terminate list */
891 };
892 MODULE_DEVICE_TABLE(pci, synclink_pci_tbl);
893
894 MODULE_LICENSE("GPL");
895
896 static struct pci_driver synclink_pci_driver = {
897 .name = "synclink",
898 .id_table = synclink_pci_tbl,
899 .probe = synclink_init_one,
900 .remove = synclink_remove_one,
901 };
902
903 static struct tty_driver *serial_driver;
904
905 /* number of characters left in xmit buffer before we ask for more */
906 #define WAKEUP_CHARS 256
907
908
909 static void mgsl_change_params(struct mgsl_struct *info);
910 static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout);
911
912 /*
913 * 1st function defined in .text section. Calling this function in
914 * init_module() followed by a breakpoint allows a remote debugger
915 * (gdb) to get the .text address for the add-symbol-file command.
916 * This allows remote debugging of dynamically loadable modules.
917 */
918 static void* mgsl_get_text_ptr(void)
919 {
920 return mgsl_get_text_ptr;
921 }
922
923 static inline int mgsl_paranoia_check(struct mgsl_struct *info,
924 char *name, const char *routine)
925 {
926 #ifdef MGSL_PARANOIA_CHECK
927 static const char *badmagic =
928 "Warning: bad magic number for mgsl struct (%s) in %s\n";
929 static const char *badinfo =
930 "Warning: null mgsl_struct for (%s) in %s\n";
931
932 if (!info) {
933 printk(badinfo, name, routine);
934 return 1;
935 }
936 if (info->magic != MGSL_MAGIC) {
937 printk(badmagic, name, routine);
938 return 1;
939 }
940 #else
941 if (!info)
942 return 1;
943 #endif
944 return 0;
945 }
946
947 /**
948 * line discipline callback wrappers
949 *
950 * The wrappers maintain line discipline references
951 * while calling into the line discipline.
952 *
953 * ldisc_receive_buf - pass receive data to line discipline
954 */
955
956 static void ldisc_receive_buf(struct tty_struct *tty,
957 const __u8 *data, char *flags, int count)
958 {
959 struct tty_ldisc *ld;
960 if (!tty)
961 return;
962 ld = tty_ldisc_ref(tty);
963 if (ld) {
964 if (ld->ops->receive_buf)
965 ld->ops->receive_buf(tty, data, flags, count);
966 tty_ldisc_deref(ld);
967 }
968 }
969
970 /* mgsl_stop() throttle (stop) transmitter
971 *
972 * Arguments: tty pointer to tty info structure
973 * Return Value: None
974 */
975 static void mgsl_stop(struct tty_struct *tty)
976 {
977 struct mgsl_struct *info = tty->driver_data;
978 unsigned long flags;
979
980 if (mgsl_paranoia_check(info, tty->name, "mgsl_stop"))
981 return;
982
983 if ( debug_level >= DEBUG_LEVEL_INFO )
984 printk("mgsl_stop(%s)\n",info->device_name);
985
986 spin_lock_irqsave(&info->irq_spinlock,flags);
987 if (info->tx_enabled)
988 usc_stop_transmitter(info);
989 spin_unlock_irqrestore(&info->irq_spinlock,flags);
990
991 } /* end of mgsl_stop() */
992
993 /* mgsl_start() release (start) transmitter
994 *
995 * Arguments: tty pointer to tty info structure
996 * Return Value: None
997 */
998 static void mgsl_start(struct tty_struct *tty)
999 {
1000 struct mgsl_struct *info = tty->driver_data;
1001 unsigned long flags;
1002
1003 if (mgsl_paranoia_check(info, tty->name, "mgsl_start"))
1004 return;
1005
1006 if ( debug_level >= DEBUG_LEVEL_INFO )
1007 printk("mgsl_start(%s)\n",info->device_name);
1008
1009 spin_lock_irqsave(&info->irq_spinlock,flags);
1010 if (!info->tx_enabled)
1011 usc_start_transmitter(info);
1012 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1013
1014 } /* end of mgsl_start() */
1015
1016 /*
1017 * Bottom half work queue access functions
1018 */
1019
1020 /* mgsl_bh_action() Return next bottom half action to perform.
1021 * Return Value: BH action code or 0 if nothing to do.
1022 */
1023 static int mgsl_bh_action(struct mgsl_struct *info)
1024 {
1025 unsigned long flags;
1026 int rc = 0;
1027
1028 spin_lock_irqsave(&info->irq_spinlock,flags);
1029
1030 if (info->pending_bh & BH_RECEIVE) {
1031 info->pending_bh &= ~BH_RECEIVE;
1032 rc = BH_RECEIVE;
1033 } else if (info->pending_bh & BH_TRANSMIT) {
1034 info->pending_bh &= ~BH_TRANSMIT;
1035 rc = BH_TRANSMIT;
1036 } else if (info->pending_bh & BH_STATUS) {
1037 info->pending_bh &= ~BH_STATUS;
1038 rc = BH_STATUS;
1039 }
1040
1041 if (!rc) {
1042 /* Mark BH routine as complete */
1043 info->bh_running = false;
1044 info->bh_requested = false;
1045 }
1046
1047 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1048
1049 return rc;
1050 }
1051
1052 /*
1053 * Perform bottom half processing of work items queued by ISR.
1054 */
1055 static void mgsl_bh_handler(struct work_struct *work)
1056 {
1057 struct mgsl_struct *info =
1058 container_of(work, struct mgsl_struct, task);
1059 int action;
1060
1061 if ( debug_level >= DEBUG_LEVEL_BH )
1062 printk( "%s(%d):mgsl_bh_handler(%s) entry\n",
1063 __FILE__,__LINE__,info->device_name);
1064
1065 info->bh_running = true;
1066
1067 while((action = mgsl_bh_action(info)) != 0) {
1068
1069 /* Process work item */
1070 if ( debug_level >= DEBUG_LEVEL_BH )
1071 printk( "%s(%d):mgsl_bh_handler() work item action=%d\n",
1072 __FILE__,__LINE__,action);
1073
1074 switch (action) {
1075
1076 case BH_RECEIVE:
1077 mgsl_bh_receive(info);
1078 break;
1079 case BH_TRANSMIT:
1080 mgsl_bh_transmit(info);
1081 break;
1082 case BH_STATUS:
1083 mgsl_bh_status(info);
1084 break;
1085 default:
1086 /* unknown work item ID */
1087 printk("Unknown work item ID=%08X!\n", action);
1088 break;
1089 }
1090 }
1091
1092 if ( debug_level >= DEBUG_LEVEL_BH )
1093 printk( "%s(%d):mgsl_bh_handler(%s) exit\n",
1094 __FILE__,__LINE__,info->device_name);
1095 }
1096
1097 static void mgsl_bh_receive(struct mgsl_struct *info)
1098 {
1099 bool (*get_rx_frame)(struct mgsl_struct *info) =
1100 (info->params.mode == MGSL_MODE_HDLC ? mgsl_get_rx_frame : mgsl_get_raw_rx_frame);
1101
1102 if ( debug_level >= DEBUG_LEVEL_BH )
1103 printk( "%s(%d):mgsl_bh_receive(%s)\n",
1104 __FILE__,__LINE__,info->device_name);
1105
1106 do
1107 {
1108 if (info->rx_rcc_underrun) {
1109 unsigned long flags;
1110 spin_lock_irqsave(&info->irq_spinlock,flags);
1111 usc_start_receiver(info);
1112 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1113 return;
1114 }
1115 } while(get_rx_frame(info));
1116 }
1117
1118 static void mgsl_bh_transmit(struct mgsl_struct *info)
1119 {
1120 struct tty_struct *tty = info->port.tty;
1121 unsigned long flags;
1122
1123 if ( debug_level >= DEBUG_LEVEL_BH )
1124 printk( "%s(%d):mgsl_bh_transmit() entry on %s\n",
1125 __FILE__,__LINE__,info->device_name);
1126
1127 if (tty)
1128 tty_wakeup(tty);
1129
1130 /* if transmitter idle and loopmode_send_done_requested
1131 * then start echoing RxD to TxD
1132 */
1133 spin_lock_irqsave(&info->irq_spinlock,flags);
1134 if ( !info->tx_active && info->loopmode_send_done_requested )
1135 usc_loopmode_send_done( info );
1136 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1137 }
1138
1139 static void mgsl_bh_status(struct mgsl_struct *info)
1140 {
1141 if ( debug_level >= DEBUG_LEVEL_BH )
1142 printk( "%s(%d):mgsl_bh_status() entry on %s\n",
1143 __FILE__,__LINE__,info->device_name);
1144
1145 info->ri_chkcount = 0;
1146 info->dsr_chkcount = 0;
1147 info->dcd_chkcount = 0;
1148 info->cts_chkcount = 0;
1149 }
1150
1151 /* mgsl_isr_receive_status()
1152 *
1153 * Service a receive status interrupt. The type of status
1154 * interrupt is indicated by the state of the RCSR.
1155 * This is only used for HDLC mode.
1156 *
1157 * Arguments: info pointer to device instance data
1158 * Return Value: None
1159 */
1160 static void mgsl_isr_receive_status( struct mgsl_struct *info )
1161 {
1162 u16 status = usc_InReg( info, RCSR );
1163
1164 if ( debug_level >= DEBUG_LEVEL_ISR )
1165 printk("%s(%d):mgsl_isr_receive_status status=%04X\n",
1166 __FILE__,__LINE__,status);
1167
1168 if ( (status & RXSTATUS_ABORT_RECEIVED) &&
1169 info->loopmode_insert_requested &&
1170 usc_loopmode_active(info) )
1171 {
1172 ++info->icount.rxabort;
1173 info->loopmode_insert_requested = false;
1174
1175 /* clear CMR:13 to start echoing RxD to TxD */
1176 info->cmr_value &= ~BIT13;
1177 usc_OutReg(info, CMR, info->cmr_value);
1178
1179 /* disable received abort irq (no longer required) */
1180 usc_OutReg(info, RICR,
1181 (usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED));
1182 }
1183
1184 if (status & (RXSTATUS_EXITED_HUNT | RXSTATUS_IDLE_RECEIVED)) {
1185 if (status & RXSTATUS_EXITED_HUNT)
1186 info->icount.exithunt++;
1187 if (status & RXSTATUS_IDLE_RECEIVED)
1188 info->icount.rxidle++;
1189 wake_up_interruptible(&info->event_wait_q);
1190 }
1191
1192 if (status & RXSTATUS_OVERRUN){
1193 info->icount.rxover++;
1194 usc_process_rxoverrun_sync( info );
1195 }
1196
1197 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
1198 usc_UnlatchRxstatusBits( info, status );
1199
1200 } /* end of mgsl_isr_receive_status() */
1201
1202 /* mgsl_isr_transmit_status()
1203 *
1204 * Service a transmit status interrupt
1205 * HDLC mode :end of transmit frame
1206 * Async mode:all data is sent
1207 * transmit status is indicated by bits in the TCSR.
1208 *
1209 * Arguments: info pointer to device instance data
1210 * Return Value: None
1211 */
1212 static void mgsl_isr_transmit_status( struct mgsl_struct *info )
1213 {
1214 u16 status = usc_InReg( info, TCSR );
1215
1216 if ( debug_level >= DEBUG_LEVEL_ISR )
1217 printk("%s(%d):mgsl_isr_transmit_status status=%04X\n",
1218 __FILE__,__LINE__,status);
1219
1220 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
1221 usc_UnlatchTxstatusBits( info, status );
1222
1223 if ( status & (TXSTATUS_UNDERRUN | TXSTATUS_ABORT_SENT) )
1224 {
1225 /* finished sending HDLC abort. This may leave */
1226 /* the TxFifo with data from the aborted frame */
1227 /* so purge the TxFifo. Also shutdown the DMA */
1228 /* channel in case there is data remaining in */
1229 /* the DMA buffer */
1230 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
1231 usc_RTCmd( info, RTCmd_PurgeTxFifo );
1232 }
1233
1234 if ( status & TXSTATUS_EOF_SENT )
1235 info->icount.txok++;
1236 else if ( status & TXSTATUS_UNDERRUN )
1237 info->icount.txunder++;
1238 else if ( status & TXSTATUS_ABORT_SENT )
1239 info->icount.txabort++;
1240 else
1241 info->icount.txunder++;
1242
1243 info->tx_active = false;
1244 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1245 del_timer(&info->tx_timer);
1246
1247 if ( info->drop_rts_on_tx_done ) {
1248 usc_get_serial_signals( info );
1249 if ( info->serial_signals & SerialSignal_RTS ) {
1250 info->serial_signals &= ~SerialSignal_RTS;
1251 usc_set_serial_signals( info );
1252 }
1253 info->drop_rts_on_tx_done = false;
1254 }
1255
1256 #if SYNCLINK_GENERIC_HDLC
1257 if (info->netcount)
1258 hdlcdev_tx_done(info);
1259 else
1260 #endif
1261 {
1262 if (info->port.tty->stopped || info->port.tty->hw_stopped) {
1263 usc_stop_transmitter(info);
1264 return;
1265 }
1266 info->pending_bh |= BH_TRANSMIT;
1267 }
1268
1269 } /* end of mgsl_isr_transmit_status() */
1270
1271 /* mgsl_isr_io_pin()
1272 *
1273 * Service an Input/Output pin interrupt. The type of
1274 * interrupt is indicated by bits in the MISR
1275 *
1276 * Arguments: info pointer to device instance data
1277 * Return Value: None
1278 */
1279 static void mgsl_isr_io_pin( struct mgsl_struct *info )
1280 {
1281 struct mgsl_icount *icount;
1282 u16 status = usc_InReg( info, MISR );
1283
1284 if ( debug_level >= DEBUG_LEVEL_ISR )
1285 printk("%s(%d):mgsl_isr_io_pin status=%04X\n",
1286 __FILE__,__LINE__,status);
1287
1288 usc_ClearIrqPendingBits( info, IO_PIN );
1289 usc_UnlatchIostatusBits( info, status );
1290
1291 if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
1292 MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
1293 icount = &info->icount;
1294 /* update input line counters */
1295 if (status & MISCSTATUS_RI_LATCHED) {
1296 if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1297 usc_DisablestatusIrqs(info,SICR_RI);
1298 icount->rng++;
1299 if ( status & MISCSTATUS_RI )
1300 info->input_signal_events.ri_up++;
1301 else
1302 info->input_signal_events.ri_down++;
1303 }
1304 if (status & MISCSTATUS_DSR_LATCHED) {
1305 if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1306 usc_DisablestatusIrqs(info,SICR_DSR);
1307 icount->dsr++;
1308 if ( status & MISCSTATUS_DSR )
1309 info->input_signal_events.dsr_up++;
1310 else
1311 info->input_signal_events.dsr_down++;
1312 }
1313 if (status & MISCSTATUS_DCD_LATCHED) {
1314 if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1315 usc_DisablestatusIrqs(info,SICR_DCD);
1316 icount->dcd++;
1317 if (status & MISCSTATUS_DCD) {
1318 info->input_signal_events.dcd_up++;
1319 } else
1320 info->input_signal_events.dcd_down++;
1321 #if SYNCLINK_GENERIC_HDLC
1322 if (info->netcount) {
1323 if (status & MISCSTATUS_DCD)
1324 netif_carrier_on(info->netdev);
1325 else
1326 netif_carrier_off(info->netdev);
1327 }
1328 #endif
1329 }
1330 if (status & MISCSTATUS_CTS_LATCHED)
1331 {
1332 if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1333 usc_DisablestatusIrqs(info,SICR_CTS);
1334 icount->cts++;
1335 if ( status & MISCSTATUS_CTS )
1336 info->input_signal_events.cts_up++;
1337 else
1338 info->input_signal_events.cts_down++;
1339 }
1340 wake_up_interruptible(&info->status_event_wait_q);
1341 wake_up_interruptible(&info->event_wait_q);
1342
1343 if (tty_port_check_carrier(&info->port) &&
1344 (status & MISCSTATUS_DCD_LATCHED) ) {
1345 if ( debug_level >= DEBUG_LEVEL_ISR )
1346 printk("%s CD now %s...", info->device_name,
1347 (status & MISCSTATUS_DCD) ? "on" : "off");
1348 if (status & MISCSTATUS_DCD)
1349 wake_up_interruptible(&info->port.open_wait);
1350 else {
1351 if ( debug_level >= DEBUG_LEVEL_ISR )
1352 printk("doing serial hangup...");
1353 if (info->port.tty)
1354 tty_hangup(info->port.tty);
1355 }
1356 }
1357
1358 if (tty_port_cts_enabled(&info->port) &&
1359 (status & MISCSTATUS_CTS_LATCHED) ) {
1360 if (info->port.tty->hw_stopped) {
1361 if (status & MISCSTATUS_CTS) {
1362 if ( debug_level >= DEBUG_LEVEL_ISR )
1363 printk("CTS tx start...");
1364 info->port.tty->hw_stopped = 0;
1365 usc_start_transmitter(info);
1366 info->pending_bh |= BH_TRANSMIT;
1367 return;
1368 }
1369 } else {
1370 if (!(status & MISCSTATUS_CTS)) {
1371 if ( debug_level >= DEBUG_LEVEL_ISR )
1372 printk("CTS tx stop...");
1373 if (info->port.tty)
1374 info->port.tty->hw_stopped = 1;
1375 usc_stop_transmitter(info);
1376 }
1377 }
1378 }
1379 }
1380
1381 info->pending_bh |= BH_STATUS;
1382
1383 /* for diagnostics set IRQ flag */
1384 if ( status & MISCSTATUS_TXC_LATCHED ){
1385 usc_OutReg( info, SICR,
1386 (unsigned short)(usc_InReg(info,SICR) & ~(SICR_TXC_ACTIVE+SICR_TXC_INACTIVE)) );
1387 usc_UnlatchIostatusBits( info, MISCSTATUS_TXC_LATCHED );
1388 info->irq_occurred = true;
1389 }
1390
1391 } /* end of mgsl_isr_io_pin() */
1392
1393 /* mgsl_isr_transmit_data()
1394 *
1395 * Service a transmit data interrupt (async mode only).
1396 *
1397 * Arguments: info pointer to device instance data
1398 * Return Value: None
1399 */
1400 static void mgsl_isr_transmit_data( struct mgsl_struct *info )
1401 {
1402 if ( debug_level >= DEBUG_LEVEL_ISR )
1403 printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n",
1404 __FILE__,__LINE__,info->xmit_cnt);
1405
1406 usc_ClearIrqPendingBits( info, TRANSMIT_DATA );
1407
1408 if (info->port.tty->stopped || info->port.tty->hw_stopped) {
1409 usc_stop_transmitter(info);
1410 return;
1411 }
1412
1413 if ( info->xmit_cnt )
1414 usc_load_txfifo( info );
1415 else
1416 info->tx_active = false;
1417
1418 if (info->xmit_cnt < WAKEUP_CHARS)
1419 info->pending_bh |= BH_TRANSMIT;
1420
1421 } /* end of mgsl_isr_transmit_data() */
1422
1423 /* mgsl_isr_receive_data()
1424 *
1425 * Service a receive data interrupt. This occurs
1426 * when operating in asynchronous interrupt transfer mode.
1427 * The receive data FIFO is flushed to the receive data buffers.
1428 *
1429 * Arguments: info pointer to device instance data
1430 * Return Value: None
1431 */
1432 static void mgsl_isr_receive_data( struct mgsl_struct *info )
1433 {
1434 int Fifocount;
1435 u16 status;
1436 int work = 0;
1437 unsigned char DataByte;
1438 struct mgsl_icount *icount = &info->icount;
1439
1440 if ( debug_level >= DEBUG_LEVEL_ISR )
1441 printk("%s(%d):mgsl_isr_receive_data\n",
1442 __FILE__,__LINE__);
1443
1444 usc_ClearIrqPendingBits( info, RECEIVE_DATA );
1445
1446 /* select FIFO status for RICR readback */
1447 usc_RCmd( info, RCmd_SelectRicrRxFifostatus );
1448
1449 /* clear the Wordstatus bit so that status readback */
1450 /* only reflects the status of this byte */
1451 usc_OutReg( info, RICR+LSBONLY, (u16)(usc_InReg(info, RICR+LSBONLY) & ~BIT3 ));
1452
1453 /* flush the receive FIFO */
1454
1455 while( (Fifocount = (usc_InReg(info,RICR) >> 8)) ) {
1456 int flag;
1457
1458 /* read one byte from RxFIFO */
1459 outw( (inw(info->io_base + CCAR) & 0x0780) | (RDR+LSBONLY),
1460 info->io_base + CCAR );
1461 DataByte = inb( info->io_base + CCAR );
1462
1463 /* get the status of the received byte */
1464 status = usc_InReg(info, RCSR);
1465 if ( status & (RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR |
1466 RXSTATUS_OVERRUN | RXSTATUS_BREAK_RECEIVED) )
1467 usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
1468
1469 icount->rx++;
1470
1471 flag = 0;
1472 if ( status & (RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR |
1473 RXSTATUS_OVERRUN | RXSTATUS_BREAK_RECEIVED) ) {
1474 printk("rxerr=%04X\n",status);
1475 /* update error statistics */
1476 if ( status & RXSTATUS_BREAK_RECEIVED ) {
1477 status &= ~(RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR);
1478 icount->brk++;
1479 } else if (status & RXSTATUS_PARITY_ERROR)
1480 icount->parity++;
1481 else if (status & RXSTATUS_FRAMING_ERROR)
1482 icount->frame++;
1483 else if (status & RXSTATUS_OVERRUN) {
1484 /* must issue purge fifo cmd before */
1485 /* 16C32 accepts more receive chars */
1486 usc_RTCmd(info,RTCmd_PurgeRxFifo);
1487 icount->overrun++;
1488 }
1489
1490 /* discard char if tty control flags say so */
1491 if (status & info->ignore_status_mask)
1492 continue;
1493
1494 status &= info->read_status_mask;
1495
1496 if (status & RXSTATUS_BREAK_RECEIVED) {
1497 flag = TTY_BREAK;
1498 if (info->port.flags & ASYNC_SAK)
1499 do_SAK(info->port.tty);
1500 } else if (status & RXSTATUS_PARITY_ERROR)
1501 flag = TTY_PARITY;
1502 else if (status & RXSTATUS_FRAMING_ERROR)
1503 flag = TTY_FRAME;
1504 } /* end of if (error) */
1505 tty_insert_flip_char(&info->port, DataByte, flag);
1506 if (status & RXSTATUS_OVERRUN) {
1507 /* Overrun is special, since it's
1508 * reported immediately, and doesn't
1509 * affect the current character
1510 */
1511 work += tty_insert_flip_char(&info->port, 0, TTY_OVERRUN);
1512 }
1513 }
1514
1515 if ( debug_level >= DEBUG_LEVEL_ISR ) {
1516 printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
1517 __FILE__,__LINE__,icount->rx,icount->brk,
1518 icount->parity,icount->frame,icount->overrun);
1519 }
1520
1521 if(work)
1522 tty_flip_buffer_push(&info->port);
1523 }
1524
1525 /* mgsl_isr_misc()
1526 *
1527 * Service a miscellaneous interrupt source.
1528 *
1529 * Arguments: info pointer to device extension (instance data)
1530 * Return Value: None
1531 */
1532 static void mgsl_isr_misc( struct mgsl_struct *info )
1533 {
1534 u16 status = usc_InReg( info, MISR );
1535
1536 if ( debug_level >= DEBUG_LEVEL_ISR )
1537 printk("%s(%d):mgsl_isr_misc status=%04X\n",
1538 __FILE__,__LINE__,status);
1539
1540 if ((status & MISCSTATUS_RCC_UNDERRUN) &&
1541 (info->params.mode == MGSL_MODE_HDLC)) {
1542
1543 /* turn off receiver and rx DMA */
1544 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
1545 usc_DmaCmd(info, DmaCmd_ResetRxChannel);
1546 usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
1547 usc_ClearIrqPendingBits(info, RECEIVE_DATA | RECEIVE_STATUS);
1548 usc_DisableInterrupts(info, RECEIVE_DATA | RECEIVE_STATUS);
1549
1550 /* schedule BH handler to restart receiver */
1551 info->pending_bh |= BH_RECEIVE;
1552 info->rx_rcc_underrun = true;
1553 }
1554
1555 usc_ClearIrqPendingBits( info, MISC );
1556 usc_UnlatchMiscstatusBits( info, status );
1557
1558 } /* end of mgsl_isr_misc() */
1559
1560 /* mgsl_isr_null()
1561 *
1562 * Services undefined interrupt vectors from the
1563 * USC. (hence this function SHOULD never be called)
1564 *
1565 * Arguments: info pointer to device extension (instance data)
1566 * Return Value: None
1567 */
1568 static void mgsl_isr_null( struct mgsl_struct *info )
1569 {
1570
1571 } /* end of mgsl_isr_null() */
1572
1573 /* mgsl_isr_receive_dma()
1574 *
1575 * Service a receive DMA channel interrupt.
1576 * For this driver there are two sources of receive DMA interrupts
1577 * as identified in the Receive DMA mode Register (RDMR):
1578 *
1579 * BIT3 EOA/EOL End of List, all receive buffers in receive
1580 * buffer list have been filled (no more free buffers
1581 * available). The DMA controller has shut down.
1582 *
1583 * BIT2 EOB End of Buffer. This interrupt occurs when a receive
1584 * DMA buffer is terminated in response to completion
1585 * of a good frame or a frame with errors. The status
1586 * of the frame is stored in the buffer entry in the
1587 * list of receive buffer entries.
1588 *
1589 * Arguments: info pointer to device instance data
1590 * Return Value: None
1591 */
1592 static void mgsl_isr_receive_dma( struct mgsl_struct *info )
1593 {
1594 u16 status;
1595
1596 /* clear interrupt pending and IUS bit for Rx DMA IRQ */
1597 usc_OutDmaReg( info, CDIR, BIT9 | BIT1 );
1598
1599 /* Read the receive DMA status to identify interrupt type. */
1600 /* This also clears the status bits. */
1601 status = usc_InDmaReg( info, RDMR );
1602
1603 if ( debug_level >= DEBUG_LEVEL_ISR )
1604 printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n",
1605 __FILE__,__LINE__,info->device_name,status);
1606
1607 info->pending_bh |= BH_RECEIVE;
1608
1609 if ( status & BIT3 ) {
1610 info->rx_overflow = true;
1611 info->icount.buf_overrun++;
1612 }
1613
1614 } /* end of mgsl_isr_receive_dma() */
1615
1616 /* mgsl_isr_transmit_dma()
1617 *
1618 * This function services a transmit DMA channel interrupt.
1619 *
1620 * For this driver there is one source of transmit DMA interrupts
1621 * as identified in the Transmit DMA Mode Register (TDMR):
1622 *
1623 * BIT2 EOB End of Buffer. This interrupt occurs when a
1624 * transmit DMA buffer has been emptied.
1625 *
1626 * The driver maintains enough transmit DMA buffers to hold at least
1627 * one max frame size transmit frame. When operating in a buffered
1628 * transmit mode, there may be enough transmit DMA buffers to hold at
1629 * least two or more max frame size frames. On an EOB condition,
1630 * determine if there are any queued transmit buffers and copy into
1631 * transmit DMA buffers if we have room.
1632 *
1633 * Arguments: info pointer to device instance data
1634 * Return Value: None
1635 */
1636 static void mgsl_isr_transmit_dma( struct mgsl_struct *info )
1637 {
1638 u16 status;
1639
1640 /* clear interrupt pending and IUS bit for Tx DMA IRQ */
1641 usc_OutDmaReg(info, CDIR, BIT8 | BIT0 );
1642
1643 /* Read the transmit DMA status to identify interrupt type. */
1644 /* This also clears the status bits. */
1645
1646 status = usc_InDmaReg( info, TDMR );
1647
1648 if ( debug_level >= DEBUG_LEVEL_ISR )
1649 printk("%s(%d):mgsl_isr_transmit_dma(%s) status=%04X\n",
1650 __FILE__,__LINE__,info->device_name,status);
1651
1652 if ( status & BIT2 ) {
1653 --info->tx_dma_buffers_used;
1654
1655 /* if there are transmit frames queued,
1656 * try to load the next one
1657 */
1658 if ( load_next_tx_holding_buffer(info) ) {
1659 /* if call returns non-zero value, we have
1660 * at least one free tx holding buffer
1661 */
1662 info->pending_bh |= BH_TRANSMIT;
1663 }
1664 }
1665
1666 } /* end of mgsl_isr_transmit_dma() */
1667
1668 /* mgsl_interrupt()
1669 *
1670 * Interrupt service routine entry point.
1671 *
1672 * Arguments:
1673 *
1674 * irq interrupt number that caused interrupt
1675 * dev_id device ID supplied during interrupt registration
1676 *
1677 * Return Value: None
1678 */
1679 static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
1680 {
1681 struct mgsl_struct *info = dev_id;
1682 u16 UscVector;
1683 u16 DmaVector;
1684
1685 if ( debug_level >= DEBUG_LEVEL_ISR )
1686 printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)entry.\n",
1687 __FILE__, __LINE__, info->irq_level);
1688
1689 spin_lock(&info->irq_spinlock);
1690
1691 for(;;) {
1692 /* Read the interrupt vectors from hardware. */
1693 UscVector = usc_InReg(info, IVR) >> 9;
1694 DmaVector = usc_InDmaReg(info, DIVR);
1695
1696 if ( debug_level >= DEBUG_LEVEL_ISR )
1697 printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n",
1698 __FILE__,__LINE__,info->device_name,UscVector,DmaVector);
1699
1700 if ( !UscVector && !DmaVector )
1701 break;
1702
1703 /* Dispatch interrupt vector */
1704 if ( UscVector )
1705 (*UscIsrTable[UscVector])(info);
1706 else if ( (DmaVector&(BIT10|BIT9)) == BIT10)
1707 mgsl_isr_transmit_dma(info);
1708 else
1709 mgsl_isr_receive_dma(info);
1710
1711 if ( info->isr_overflow ) {
1712 printk(KERN_ERR "%s(%d):%s isr overflow irq=%d\n",
1713 __FILE__, __LINE__, info->device_name, info->irq_level);
1714 usc_DisableMasterIrqBit(info);
1715 usc_DisableDmaInterrupts(info,DICR_MASTER);
1716 break;
1717 }
1718 }
1719
1720 /* Request bottom half processing if there's something
1721 * for it to do and the bh is not already running
1722 */
1723
1724 if ( info->pending_bh && !info->bh_running && !info->bh_requested ) {
1725 if ( debug_level >= DEBUG_LEVEL_ISR )
1726 printk("%s(%d):%s queueing bh task.\n",
1727 __FILE__,__LINE__,info->device_name);
1728 schedule_work(&info->task);
1729 info->bh_requested = true;
1730 }
1731
1732 spin_unlock(&info->irq_spinlock);
1733
1734 if ( debug_level >= DEBUG_LEVEL_ISR )
1735 printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)exit.\n",
1736 __FILE__, __LINE__, info->irq_level);
1737
1738 return IRQ_HANDLED;
1739 } /* end of mgsl_interrupt() */
1740
1741 /* startup()
1742 *
1743 * Initialize and start device.
1744 *
1745 * Arguments: info pointer to device instance data
1746 * Return Value: 0 if success, otherwise error code
1747 */
1748 static int startup(struct mgsl_struct * info)
1749 {
1750 int retval = 0;
1751
1752 if ( debug_level >= DEBUG_LEVEL_INFO )
1753 printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name);
1754
1755 if (tty_port_initialized(&info->port))
1756 return 0;
1757
1758 if (!info->xmit_buf) {
1759 /* allocate a page of memory for a transmit buffer */
1760 info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
1761 if (!info->xmit_buf) {
1762 printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
1763 __FILE__,__LINE__,info->device_name);
1764 return -ENOMEM;
1765 }
1766 }
1767
1768 info->pending_bh = 0;
1769
1770 memset(&info->icount, 0, sizeof(info->icount));
1771
1772 setup_timer(&info->tx_timer, mgsl_tx_timeout, (unsigned long)info);
1773
1774 /* Allocate and claim adapter resources */
1775 retval = mgsl_claim_resources(info);
1776
1777 /* perform existence check and diagnostics */
1778 if ( !retval )
1779 retval = mgsl_adapter_test(info);
1780
1781 if ( retval ) {
1782 if (capable(CAP_SYS_ADMIN) && info->port.tty)
1783 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
1784 mgsl_release_resources(info);
1785 return retval;
1786 }
1787
1788 /* program hardware for current parameters */
1789 mgsl_change_params(info);
1790
1791 if (info->port.tty)
1792 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
1793
1794 tty_port_set_initialized(&info->port, 1);
1795
1796 return 0;
1797 } /* end of startup() */
1798
1799 /* shutdown()
1800 *
1801 * Called by mgsl_close() and mgsl_hangup() to shutdown hardware
1802 *
1803 * Arguments: info pointer to device instance data
1804 * Return Value: None
1805 */
1806 static void shutdown(struct mgsl_struct * info)
1807 {
1808 unsigned long flags;
1809
1810 if (!tty_port_initialized(&info->port))
1811 return;
1812
1813 if (debug_level >= DEBUG_LEVEL_INFO)
1814 printk("%s(%d):mgsl_shutdown(%s)\n",
1815 __FILE__,__LINE__, info->device_name );
1816
1817 /* clear status wait queue because status changes */
1818 /* can't happen after shutting down the hardware */
1819 wake_up_interruptible(&info->status_event_wait_q);
1820 wake_up_interruptible(&info->event_wait_q);
1821
1822 del_timer_sync(&info->tx_timer);
1823
1824 if (info->xmit_buf) {
1825 free_page((unsigned long) info->xmit_buf);
1826 info->xmit_buf = NULL;
1827 }
1828
1829 spin_lock_irqsave(&info->irq_spinlock,flags);
1830 usc_DisableMasterIrqBit(info);
1831 usc_stop_receiver(info);
1832 usc_stop_transmitter(info);
1833 usc_DisableInterrupts(info,RECEIVE_DATA | RECEIVE_STATUS |
1834 TRANSMIT_DATA | TRANSMIT_STATUS | IO_PIN | MISC );
1835 usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE);
1836
1837 /* Disable DMAEN (Port 7, Bit 14) */
1838 /* This disconnects the DMA request signal from the ISA bus */
1839 /* on the ISA adapter. This has no effect for the PCI adapter */
1840 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14));
1841
1842 /* Disable INTEN (Port 6, Bit12) */
1843 /* This disconnects the IRQ request signal to the ISA bus */
1844 /* on the ISA adapter. This has no effect for the PCI adapter */
1845 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
1846
1847 if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
1848 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
1849 usc_set_serial_signals(info);
1850 }
1851
1852 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1853
1854 mgsl_release_resources(info);
1855
1856 if (info->port.tty)
1857 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
1858
1859 tty_port_set_initialized(&info->port, 0);
1860 } /* end of shutdown() */
1861
1862 static void mgsl_program_hw(struct mgsl_struct *info)
1863 {
1864 unsigned long flags;
1865
1866 spin_lock_irqsave(&info->irq_spinlock,flags);
1867
1868 usc_stop_receiver(info);
1869 usc_stop_transmitter(info);
1870 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1871
1872 if (info->params.mode == MGSL_MODE_HDLC ||
1873 info->params.mode == MGSL_MODE_RAW ||
1874 info->netcount)
1875 usc_set_sync_mode(info);
1876 else
1877 usc_set_async_mode(info);
1878
1879 usc_set_serial_signals(info);
1880
1881 info->dcd_chkcount = 0;
1882 info->cts_chkcount = 0;
1883 info->ri_chkcount = 0;
1884 info->dsr_chkcount = 0;
1885
1886 usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI);
1887 usc_EnableInterrupts(info, IO_PIN);
1888 usc_get_serial_signals(info);
1889
1890 if (info->netcount || info->port.tty->termios.c_cflag & CREAD)
1891 usc_start_receiver(info);
1892
1893 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1894 }
1895
1896 /* Reconfigure adapter based on new parameters
1897 */
1898 static void mgsl_change_params(struct mgsl_struct *info)
1899 {
1900 unsigned cflag;
1901 int bits_per_char;
1902
1903 if (!info->port.tty)
1904 return;
1905
1906 if (debug_level >= DEBUG_LEVEL_INFO)
1907 printk("%s(%d):mgsl_change_params(%s)\n",
1908 __FILE__,__LINE__, info->device_name );
1909
1910 cflag = info->port.tty->termios.c_cflag;
1911
1912 /* if B0 rate (hangup) specified then negate RTS and DTR */
1913 /* otherwise assert RTS and DTR */
1914 if (cflag & CBAUD)
1915 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
1916 else
1917 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
1918
1919 /* byte size and parity */
1920
1921 switch (cflag & CSIZE) {
1922 case CS5: info->params.data_bits = 5; break;
1923 case CS6: info->params.data_bits = 6; break;
1924 case CS7: info->params.data_bits = 7; break;
1925 case CS8: info->params.data_bits = 8; break;
1926 /* Never happens, but GCC is too dumb to figure it out */
1927 default: info->params.data_bits = 7; break;
1928 }
1929
1930 if (cflag & CSTOPB)
1931 info->params.stop_bits = 2;
1932 else
1933 info->params.stop_bits = 1;
1934
1935 info->params.parity = ASYNC_PARITY_NONE;
1936 if (cflag & PARENB) {
1937 if (cflag & PARODD)
1938 info->params.parity = ASYNC_PARITY_ODD;
1939 else
1940 info->params.parity = ASYNC_PARITY_EVEN;
1941 #ifdef CMSPAR
1942 if (cflag & CMSPAR)
1943 info->params.parity = ASYNC_PARITY_SPACE;
1944 #endif
1945 }
1946
1947 /* calculate number of jiffies to transmit a full
1948 * FIFO (32 bytes) at specified data rate
1949 */
1950 bits_per_char = info->params.data_bits +
1951 info->params.stop_bits + 1;
1952
1953 /* if port data rate is set to 460800 or less then
1954 * allow tty settings to override, otherwise keep the
1955 * current data rate.
1956 */
1957 if (info->params.data_rate <= 460800)
1958 info->params.data_rate = tty_get_baud_rate(info->port.tty);
1959
1960 if ( info->params.data_rate ) {
1961 info->timeout = (32*HZ*bits_per_char) /
1962 info->params.data_rate;
1963 }
1964 info->timeout += HZ/50; /* Add .02 seconds of slop */
1965
1966 tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
1967 tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL);
1968
1969 /* process tty input control flags */
1970
1971 info->read_status_mask = RXSTATUS_OVERRUN;
1972 if (I_INPCK(info->port.tty))
1973 info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
1974 if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
1975 info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
1976
1977 if (I_IGNPAR(info->port.tty))
1978 info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
1979 if (I_IGNBRK(info->port.tty)) {
1980 info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED;
1981 /* If ignoring parity and break indicators, ignore
1982 * overruns too. (For real raw support).
1983 */
1984 if (I_IGNPAR(info->port.tty))
1985 info->ignore_status_mask |= RXSTATUS_OVERRUN;
1986 }
1987
1988 mgsl_program_hw(info);
1989
1990 } /* end of mgsl_change_params() */
1991
1992 /* mgsl_put_char()
1993 *
1994 * Add a character to the transmit buffer.
1995 *
1996 * Arguments: tty pointer to tty information structure
1997 * ch character to add to transmit buffer
1998 *
1999 * Return Value: None
2000 */
2001 static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
2002 {
2003 struct mgsl_struct *info = tty->driver_data;
2004 unsigned long flags;
2005 int ret = 0;
2006
2007 if (debug_level >= DEBUG_LEVEL_INFO) {
2008 printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n",
2009 __FILE__, __LINE__, ch, info->device_name);
2010 }
2011
2012 if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char"))
2013 return 0;
2014
2015 if (!info->xmit_buf)
2016 return 0;
2017
2018 spin_lock_irqsave(&info->irq_spinlock, flags);
2019
2020 if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) {
2021 if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) {
2022 info->xmit_buf[info->xmit_head++] = ch;
2023 info->xmit_head &= SERIAL_XMIT_SIZE-1;
2024 info->xmit_cnt++;
2025 ret = 1;
2026 }
2027 }
2028 spin_unlock_irqrestore(&info->irq_spinlock, flags);
2029 return ret;
2030
2031 } /* end of mgsl_put_char() */
2032
2033 /* mgsl_flush_chars()
2034 *
2035 * Enable transmitter so remaining characters in the
2036 * transmit buffer are sent.
2037 *
2038 * Arguments: tty pointer to tty information structure
2039 * Return Value: None
2040 */
2041 static void mgsl_flush_chars(struct tty_struct *tty)
2042 {
2043 struct mgsl_struct *info = tty->driver_data;
2044 unsigned long flags;
2045
2046 if ( debug_level >= DEBUG_LEVEL_INFO )
2047 printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n",
2048 __FILE__,__LINE__,info->device_name,info->xmit_cnt);
2049
2050 if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_chars"))
2051 return;
2052
2053 if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
2054 !info->xmit_buf)
2055 return;
2056
2057 if ( debug_level >= DEBUG_LEVEL_INFO )
2058 printk( "%s(%d):mgsl_flush_chars() entry on %s starting transmitter\n",
2059 __FILE__,__LINE__,info->device_name );
2060
2061 spin_lock_irqsave(&info->irq_spinlock,flags);
2062
2063 if (!info->tx_active) {
2064 if ( (info->params.mode == MGSL_MODE_HDLC ||
2065 info->params.mode == MGSL_MODE_RAW) && info->xmit_cnt ) {
2066 /* operating in synchronous (frame oriented) mode */
2067 /* copy data from circular xmit_buf to */
2068 /* transmit DMA buffer. */
2069 mgsl_load_tx_dma_buffer(info,
2070 info->xmit_buf,info->xmit_cnt);
2071 }
2072 usc_start_transmitter(info);
2073 }
2074
2075 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2076
2077 } /* end of mgsl_flush_chars() */
2078
2079 /* mgsl_write()
2080 *
2081 * Send a block of data
2082 *
2083 * Arguments:
2084 *
2085 * tty pointer to tty information structure
2086 * buf pointer to buffer containing send data
2087 * count size of send data in bytes
2088 *
2089 * Return Value: number of characters written
2090 */
2091 static int mgsl_write(struct tty_struct * tty,
2092 const unsigned char *buf, int count)
2093 {
2094 int c, ret = 0;
2095 struct mgsl_struct *info = tty->driver_data;
2096 unsigned long flags;
2097
2098 if ( debug_level >= DEBUG_LEVEL_INFO )
2099 printk( "%s(%d):mgsl_write(%s) count=%d\n",
2100 __FILE__,__LINE__,info->device_name,count);
2101
2102 if (mgsl_paranoia_check(info, tty->name, "mgsl_write"))
2103 goto cleanup;
2104
2105 if (!info->xmit_buf)
2106 goto cleanup;
2107
2108 if ( info->params.mode == MGSL_MODE_HDLC ||
2109 info->params.mode == MGSL_MODE_RAW ) {
2110 /* operating in synchronous (frame oriented) mode */
2111 if (info->tx_active) {
2112
2113 if ( info->params.mode == MGSL_MODE_HDLC ) {
2114 ret = 0;
2115 goto cleanup;
2116 }
2117 /* transmitter is actively sending data -
2118 * if we have multiple transmit dma and
2119 * holding buffers, attempt to queue this
2120 * frame for transmission at a later time.
2121 */
2122 if (info->tx_holding_count >= info->num_tx_holding_buffers ) {
2123 /* no tx holding buffers available */
2124 ret = 0;
2125 goto cleanup;
2126 }
2127
2128 /* queue transmit frame request */
2129 ret = count;
2130 save_tx_buffer_request(info,buf,count);
2131
2132 /* if we have sufficient tx dma buffers,
2133 * load the next buffered tx request
2134 */
2135 spin_lock_irqsave(&info->irq_spinlock,flags);
2136 load_next_tx_holding_buffer(info);
2137 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2138 goto cleanup;
2139 }
2140
2141 /* if operating in HDLC LoopMode and the adapter */
2142 /* has yet to be inserted into the loop, we can't */
2143 /* transmit */
2144
2145 if ( (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) &&
2146 !usc_loopmode_active(info) )
2147 {
2148 ret = 0;
2149 goto cleanup;
2150 }
2151
2152 if ( info->xmit_cnt ) {
2153 /* Send accumulated from send_char() calls */
2154 /* as frame and wait before accepting more data. */
2155 ret = 0;
2156
2157 /* copy data from circular xmit_buf to */
2158 /* transmit DMA buffer. */
2159 mgsl_load_tx_dma_buffer(info,
2160 info->xmit_buf,info->xmit_cnt);
2161 if ( debug_level >= DEBUG_LEVEL_INFO )
2162 printk( "%s(%d):mgsl_write(%s) sync xmit_cnt flushing\n",
2163 __FILE__,__LINE__,info->device_name);
2164 } else {
2165 if ( debug_level >= DEBUG_LEVEL_INFO )
2166 printk( "%s(%d):mgsl_write(%s) sync transmit accepted\n",
2167 __FILE__,__LINE__,info->device_name);
2168 ret = count;
2169 info->xmit_cnt = count;
2170 mgsl_load_tx_dma_buffer(info,buf,count);
2171 }
2172 } else {
2173 while (1) {
2174 spin_lock_irqsave(&info->irq_spinlock,flags);
2175 c = min_t(int, count,
2176 min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
2177 SERIAL_XMIT_SIZE - info->xmit_head));
2178 if (c <= 0) {
2179 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2180 break;
2181 }
2182 memcpy(info->xmit_buf + info->xmit_head, buf, c);
2183 info->xmit_head = ((info->xmit_head + c) &
2184 (SERIAL_XMIT_SIZE-1));
2185 info->xmit_cnt += c;
2186 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2187 buf += c;
2188 count -= c;
2189 ret += c;
2190 }
2191 }
2192
2193 if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
2194 spin_lock_irqsave(&info->irq_spinlock,flags);
2195 if (!info->tx_active)
2196 usc_start_transmitter(info);
2197 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2198 }
2199 cleanup:
2200 if ( debug_level >= DEBUG_LEVEL_INFO )
2201 printk( "%s(%d):mgsl_write(%s) returning=%d\n",
2202 __FILE__,__LINE__,info->device_name,ret);
2203
2204 return ret;
2205
2206 } /* end of mgsl_write() */
2207
2208 /* mgsl_write_room()
2209 *
2210 * Return the count of free bytes in transmit buffer
2211 *
2212 * Arguments: tty pointer to tty info structure
2213 * Return Value: None
2214 */
2215 static int mgsl_write_room(struct tty_struct *tty)
2216 {
2217 struct mgsl_struct *info = tty->driver_data;
2218 int ret;
2219
2220 if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room"))
2221 return 0;
2222 ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
2223 if (ret < 0)
2224 ret = 0;
2225
2226 if (debug_level >= DEBUG_LEVEL_INFO)
2227 printk("%s(%d):mgsl_write_room(%s)=%d\n",
2228 __FILE__,__LINE__, info->device_name,ret );
2229
2230 if ( info->params.mode == MGSL_MODE_HDLC ||
2231 info->params.mode == MGSL_MODE_RAW ) {
2232 /* operating in synchronous (frame oriented) mode */
2233 if ( info->tx_active )
2234 return 0;
2235 else
2236 return HDLC_MAX_FRAME_SIZE;
2237 }
2238
2239 return ret;
2240
2241 } /* end of mgsl_write_room() */
2242
2243 /* mgsl_chars_in_buffer()
2244 *
2245 * Return the count of bytes in transmit buffer
2246 *
2247 * Arguments: tty pointer to tty info structure
2248 * Return Value: None
2249 */
2250 static int mgsl_chars_in_buffer(struct tty_struct *tty)
2251 {
2252 struct mgsl_struct *info = tty->driver_data;
2253
2254 if (debug_level >= DEBUG_LEVEL_INFO)
2255 printk("%s(%d):mgsl_chars_in_buffer(%s)\n",
2256 __FILE__,__LINE__, info->device_name );
2257
2258 if (mgsl_paranoia_check(info, tty->name, "mgsl_chars_in_buffer"))
2259 return 0;
2260
2261 if (debug_level >= DEBUG_LEVEL_INFO)
2262 printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n",
2263 __FILE__,__LINE__, info->device_name,info->xmit_cnt );
2264
2265 if ( info->params.mode == MGSL_MODE_HDLC ||
2266 info->params.mode == MGSL_MODE_RAW ) {
2267 /* operating in synchronous (frame oriented) mode */
2268 if ( info->tx_active )
2269 return info->max_frame_size;
2270 else
2271 return 0;
2272 }
2273
2274 return info->xmit_cnt;
2275 } /* end of mgsl_chars_in_buffer() */
2276
2277 /* mgsl_flush_buffer()
2278 *
2279 * Discard all data in the send buffer
2280 *
2281 * Arguments: tty pointer to tty info structure
2282 * Return Value: None
2283 */
2284 static void mgsl_flush_buffer(struct tty_struct *tty)
2285 {
2286 struct mgsl_struct *info = tty->driver_data;
2287 unsigned long flags;
2288
2289 if (debug_level >= DEBUG_LEVEL_INFO)
2290 printk("%s(%d):mgsl_flush_buffer(%s) entry\n",
2291 __FILE__,__LINE__, info->device_name );
2292
2293 if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_buffer"))
2294 return;
2295
2296 spin_lock_irqsave(&info->irq_spinlock,flags);
2297 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
2298 del_timer(&info->tx_timer);
2299 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2300
2301 tty_wakeup(tty);
2302 }
2303
2304 /* mgsl_send_xchar()
2305 *
2306 * Send a high-priority XON/XOFF character
2307 *
2308 * Arguments: tty pointer to tty info structure
2309 * ch character to send
2310 * Return Value: None
2311 */
2312 static void mgsl_send_xchar(struct tty_struct *tty, char ch)
2313 {
2314 struct mgsl_struct *info = tty->driver_data;
2315 unsigned long flags;
2316
2317 if (debug_level >= DEBUG_LEVEL_INFO)
2318 printk("%s(%d):mgsl_send_xchar(%s,%d)\n",
2319 __FILE__,__LINE__, info->device_name, ch );
2320
2321 if (mgsl_paranoia_check(info, tty->name, "mgsl_send_xchar"))
2322 return;
2323
2324 info->x_char = ch;
2325 if (ch) {
2326 /* Make sure transmit interrupts are on */
2327 spin_lock_irqsave(&info->irq_spinlock,flags);
2328 if (!info->tx_enabled)
2329 usc_start_transmitter(info);
2330 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2331 }
2332 } /* end of mgsl_send_xchar() */
2333
2334 /* mgsl_throttle()
2335 *
2336 * Signal remote device to throttle send data (our receive data)
2337 *
2338 * Arguments: tty pointer to tty info structure
2339 * Return Value: None
2340 */
2341 static void mgsl_throttle(struct tty_struct * tty)
2342 {
2343 struct mgsl_struct *info = tty->driver_data;
2344 unsigned long flags;
2345
2346 if (debug_level >= DEBUG_LEVEL_INFO)
2347 printk("%s(%d):mgsl_throttle(%s) entry\n",
2348 __FILE__,__LINE__, info->device_name );
2349
2350 if (mgsl_paranoia_check(info, tty->name, "mgsl_throttle"))
2351 return;
2352
2353 if (I_IXOFF(tty))
2354 mgsl_send_xchar(tty, STOP_CHAR(tty));
2355
2356 if (C_CRTSCTS(tty)) {
2357 spin_lock_irqsave(&info->irq_spinlock,flags);
2358 info->serial_signals &= ~SerialSignal_RTS;
2359 usc_set_serial_signals(info);
2360 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2361 }
2362 } /* end of mgsl_throttle() */
2363
2364 /* mgsl_unthrottle()
2365 *
2366 * Signal remote device to stop throttling send data (our receive data)
2367 *
2368 * Arguments: tty pointer to tty info structure
2369 * Return Value: None
2370 */
2371 static void mgsl_unthrottle(struct tty_struct * tty)
2372 {
2373 struct mgsl_struct *info = tty->driver_data;
2374 unsigned long flags;
2375
2376 if (debug_level >= DEBUG_LEVEL_INFO)
2377 printk("%s(%d):mgsl_unthrottle(%s) entry\n",
2378 __FILE__,__LINE__, info->device_name );
2379
2380 if (mgsl_paranoia_check(info, tty->name, "mgsl_unthrottle"))
2381 return;
2382
2383 if (I_IXOFF(tty)) {
2384 if (info->x_char)
2385 info->x_char = 0;
2386 else
2387 mgsl_send_xchar(tty, START_CHAR(tty));
2388 }
2389
2390 if (C_CRTSCTS(tty)) {
2391 spin_lock_irqsave(&info->irq_spinlock,flags);
2392 info->serial_signals |= SerialSignal_RTS;
2393 usc_set_serial_signals(info);
2394 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2395 }
2396
2397 } /* end of mgsl_unthrottle() */
2398
2399 /* mgsl_get_stats()
2400 *
2401 * get the current serial parameters information
2402 *
2403 * Arguments: info pointer to device instance data
2404 * user_icount pointer to buffer to hold returned stats
2405 *
2406 * Return Value: 0 if success, otherwise error code
2407 */
2408 static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount)
2409 {
2410 int err;
2411
2412 if (debug_level >= DEBUG_LEVEL_INFO)
2413 printk("%s(%d):mgsl_get_params(%s)\n",
2414 __FILE__,__LINE__, info->device_name);
2415
2416 if (!user_icount) {
2417 memset(&info->icount, 0, sizeof(info->icount));
2418 } else {
2419 mutex_lock(&info->port.mutex);
2420 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
2421 mutex_unlock(&info->port.mutex);
2422 if (err)
2423 return -EFAULT;
2424 }
2425
2426 return 0;
2427
2428 } /* end of mgsl_get_stats() */
2429
2430 /* mgsl_get_params()
2431 *
2432 * get the current serial parameters information
2433 *
2434 * Arguments: info pointer to device instance data
2435 * user_params pointer to buffer to hold returned params
2436 *
2437 * Return Value: 0 if success, otherwise error code
2438 */
2439 static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params)
2440 {
2441 int err;
2442 if (debug_level >= DEBUG_LEVEL_INFO)
2443 printk("%s(%d):mgsl_get_params(%s)\n",
2444 __FILE__,__LINE__, info->device_name);
2445
2446 mutex_lock(&info->port.mutex);
2447 COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
2448 mutex_unlock(&info->port.mutex);
2449 if (err) {
2450 if ( debug_level >= DEBUG_LEVEL_INFO )
2451 printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n",
2452 __FILE__,__LINE__,info->device_name);
2453 return -EFAULT;
2454 }
2455
2456 return 0;
2457
2458 } /* end of mgsl_get_params() */
2459
2460 /* mgsl_set_params()
2461 *
2462 * set the serial parameters
2463 *
2464 * Arguments:
2465 *
2466 * info pointer to device instance data
2467 * new_params user buffer containing new serial params
2468 *
2469 * Return Value: 0 if success, otherwise error code
2470 */
2471 static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params)
2472 {
2473 unsigned long flags;
2474 MGSL_PARAMS tmp_params;
2475 int err;
2476
2477 if (debug_level >= DEBUG_LEVEL_INFO)
2478 printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__,
2479 info->device_name );
2480 COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2481 if (err) {
2482 if ( debug_level >= DEBUG_LEVEL_INFO )
2483 printk( "%s(%d):mgsl_set_params(%s) user buffer copy failed\n",
2484 __FILE__,__LINE__,info->device_name);
2485 return -EFAULT;
2486 }
2487
2488 mutex_lock(&info->port.mutex);
2489 spin_lock_irqsave(&info->irq_spinlock,flags);
2490 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
2491 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2492
2493 mgsl_change_params(info);
2494 mutex_unlock(&info->port.mutex);
2495
2496 return 0;
2497
2498 } /* end of mgsl_set_params() */
2499
2500 /* mgsl_get_txidle()
2501 *
2502 * get the current transmit idle mode
2503 *
2504 * Arguments: info pointer to device instance data
2505 * idle_mode pointer to buffer to hold returned idle mode
2506 *
2507 * Return Value: 0 if success, otherwise error code
2508 */
2509 static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode)
2510 {
2511 int err;
2512
2513 if (debug_level >= DEBUG_LEVEL_INFO)
2514 printk("%s(%d):mgsl_get_txidle(%s)=%d\n",
2515 __FILE__,__LINE__, info->device_name, info->idle_mode);
2516
2517 COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
2518 if (err) {
2519 if ( debug_level >= DEBUG_LEVEL_INFO )
2520 printk( "%s(%d):mgsl_get_txidle(%s) user buffer copy failed\n",
2521 __FILE__,__LINE__,info->device_name);
2522 return -EFAULT;
2523 }
2524
2525 return 0;
2526
2527 } /* end of mgsl_get_txidle() */
2528
2529 /* mgsl_set_txidle() service ioctl to set transmit idle mode
2530 *
2531 * Arguments: info pointer to device instance data
2532 * idle_mode new idle mode
2533 *
2534 * Return Value: 0 if success, otherwise error code
2535 */
2536 static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode)
2537 {
2538 unsigned long flags;
2539
2540 if (debug_level >= DEBUG_LEVEL_INFO)
2541 printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__,
2542 info->device_name, idle_mode );
2543
2544 spin_lock_irqsave(&info->irq_spinlock,flags);
2545 info->idle_mode = idle_mode;
2546 usc_set_txidle( info );
2547 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2548 return 0;
2549
2550 } /* end of mgsl_set_txidle() */
2551
2552 /* mgsl_txenable()
2553 *
2554 * enable or disable the transmitter
2555 *
2556 * Arguments:
2557 *
2558 * info pointer to device instance data
2559 * enable 1 = enable, 0 = disable
2560 *
2561 * Return Value: 0 if success, otherwise error code
2562 */
2563 static int mgsl_txenable(struct mgsl_struct * info, int enable)
2564 {
2565 unsigned long flags;
2566
2567 if (debug_level >= DEBUG_LEVEL_INFO)
2568 printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__,
2569 info->device_name, enable);
2570
2571 spin_lock_irqsave(&info->irq_spinlock,flags);
2572 if ( enable ) {
2573 if ( !info->tx_enabled ) {
2574
2575 usc_start_transmitter(info);
2576 /*--------------------------------------------------
2577 * if HDLC/SDLC Loop mode, attempt to insert the
2578 * station in the 'loop' by setting CMR:13. Upon
2579 * receipt of the next GoAhead (RxAbort) sequence,
2580 * the OnLoop indicator (CCSR:7) should go active
2581 * to indicate that we are on the loop
2582 *--------------------------------------------------*/
2583 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
2584 usc_loopmode_insert_request( info );
2585 }
2586 } else {
2587 if ( info->tx_enabled )
2588 usc_stop_transmitter(info);
2589 }
2590 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2591 return 0;
2592
2593 } /* end of mgsl_txenable() */
2594
2595 /* mgsl_txabort() abort send HDLC frame
2596 *
2597 * Arguments: info pointer to device instance data
2598 * Return Value: 0 if success, otherwise error code
2599 */
2600 static int mgsl_txabort(struct mgsl_struct * info)
2601 {
2602 unsigned long flags;
2603
2604 if (debug_level >= DEBUG_LEVEL_INFO)
2605 printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__,
2606 info->device_name);
2607
2608 spin_lock_irqsave(&info->irq_spinlock,flags);
2609 if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC )
2610 {
2611 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
2612 usc_loopmode_cancel_transmit( info );
2613 else
2614 usc_TCmd(info,TCmd_SendAbort);
2615 }
2616 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2617 return 0;
2618
2619 } /* end of mgsl_txabort() */
2620
2621 /* mgsl_rxenable() enable or disable the receiver
2622 *
2623 * Arguments: info pointer to device instance data
2624 * enable 1 = enable, 0 = disable
2625 * Return Value: 0 if success, otherwise error code
2626 */
2627 static int mgsl_rxenable(struct mgsl_struct * info, int enable)
2628 {
2629 unsigned long flags;
2630
2631 if (debug_level >= DEBUG_LEVEL_INFO)
2632 printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__,
2633 info->device_name, enable);
2634
2635 spin_lock_irqsave(&info->irq_spinlock,flags);
2636 if ( enable ) {
2637 if ( !info->rx_enabled )
2638 usc_start_receiver(info);
2639 } else {
2640 if ( info->rx_enabled )
2641 usc_stop_receiver(info);
2642 }
2643 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2644 return 0;
2645
2646 } /* end of mgsl_rxenable() */
2647
2648 /* mgsl_wait_event() wait for specified event to occur
2649 *
2650 * Arguments: info pointer to device instance data
2651 * mask pointer to bitmask of events to wait for
2652 * Return Value: 0 if successful and bit mask updated with
2653 * of events triggerred,
2654 * otherwise error code
2655 */
2656 static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
2657 {
2658 unsigned long flags;
2659 int s;
2660 int rc=0;
2661 struct mgsl_icount cprev, cnow;
2662 int events;
2663 int mask;
2664 struct _input_signal_events oldsigs, newsigs;
2665 DECLARE_WAITQUEUE(wait, current);
2666
2667 COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
2668 if (rc) {
2669 return -EFAULT;
2670 }
2671
2672 if (debug_level >= DEBUG_LEVEL_INFO)
2673 printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__,
2674 info->device_name, mask);
2675
2676 spin_lock_irqsave(&info->irq_spinlock,flags);
2677
2678 /* return immediately if state matches requested events */
2679 usc_get_serial_signals(info);
2680 s = info->serial_signals;
2681 events = mask &
2682 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2683 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2684 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2685 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2686 if (events) {
2687 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2688 goto exit;
2689 }
2690
2691 /* save current irq counts */
2692 cprev = info->icount;
2693 oldsigs = info->input_signal_events;
2694
2695 /* enable hunt and idle irqs if needed */
2696 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2697 u16 oldreg = usc_InReg(info,RICR);
2698 u16 newreg = oldreg +
2699 (mask & MgslEvent_ExitHuntMode ? RXSTATUS_EXITED_HUNT:0) +
2700 (mask & MgslEvent_IdleReceived ? RXSTATUS_IDLE_RECEIVED:0);
2701 if (oldreg != newreg)
2702 usc_OutReg(info, RICR, newreg);
2703 }
2704
2705 set_current_state(TASK_INTERRUPTIBLE);
2706 add_wait_queue(&info->event_wait_q, &wait);
2707
2708 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2709
2710
2711 for(;;) {
2712 schedule();
2713 if (signal_pending(current)) {
2714 rc = -ERESTARTSYS;
2715 break;
2716 }
2717
2718 /* get current irq counts */
2719 spin_lock_irqsave(&info->irq_spinlock,flags);
2720 cnow = info->icount;
2721 newsigs = info->input_signal_events;
2722 set_current_state(TASK_INTERRUPTIBLE);
2723 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2724
2725 /* if no change, wait aborted for some reason */
2726 if (newsigs.dsr_up == oldsigs.dsr_up &&
2727 newsigs.dsr_down == oldsigs.dsr_down &&
2728 newsigs.dcd_up == oldsigs.dcd_up &&
2729 newsigs.dcd_down == oldsigs.dcd_down &&
2730 newsigs.cts_up == oldsigs.cts_up &&
2731 newsigs.cts_down == oldsigs.cts_down &&
2732 newsigs.ri_up == oldsigs.ri_up &&
2733 newsigs.ri_down == oldsigs.ri_down &&
2734 cnow.exithunt == cprev.exithunt &&
2735 cnow.rxidle == cprev.rxidle) {
2736 rc = -EIO;
2737 break;
2738 }
2739
2740 events = mask &
2741 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
2742 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2743 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
2744 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2745 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
2746 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2747 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
2748 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
2749 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
2750 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
2751 if (events)
2752 break;
2753
2754 cprev = cnow;
2755 oldsigs = newsigs;
2756 }
2757
2758 remove_wait_queue(&info->event_wait_q, &wait);
2759 set_current_state(TASK_RUNNING);
2760
2761 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2762 spin_lock_irqsave(&info->irq_spinlock,flags);
2763 if (!waitqueue_active(&info->event_wait_q)) {
2764 /* disable enable exit hunt mode/idle rcvd IRQs */
2765 usc_OutReg(info, RICR, usc_InReg(info,RICR) &
2766 ~(RXSTATUS_EXITED_HUNT | RXSTATUS_IDLE_RECEIVED));
2767 }
2768 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2769 }
2770 exit:
2771 if ( rc == 0 )
2772 PUT_USER(rc, events, mask_ptr);
2773
2774 return rc;
2775
2776 } /* end of mgsl_wait_event() */
2777
2778 static int modem_input_wait(struct mgsl_struct *info,int arg)
2779 {
2780 unsigned long flags;
2781 int rc;
2782 struct mgsl_icount cprev, cnow;
2783 DECLARE_WAITQUEUE(wait, current);
2784
2785 /* save current irq counts */
2786 spin_lock_irqsave(&info->irq_spinlock,flags);
2787 cprev = info->icount;
2788 add_wait_queue(&info->status_event_wait_q, &wait);
2789 set_current_state(TASK_INTERRUPTIBLE);
2790 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2791
2792 for(;;) {
2793 schedule();
2794 if (signal_pending(current)) {
2795 rc = -ERESTARTSYS;
2796 break;
2797 }
2798
2799 /* get new irq counts */
2800 spin_lock_irqsave(&info->irq_spinlock,flags);
2801 cnow = info->icount;
2802 set_current_state(TASK_INTERRUPTIBLE);
2803 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2804
2805 /* if no change, wait aborted for some reason */
2806 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2807 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
2808 rc = -EIO;
2809 break;
2810 }
2811
2812 /* check for change in caller specified modem input */
2813 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
2814 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
2815 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
2816 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
2817 rc = 0;
2818 break;
2819 }
2820
2821 cprev = cnow;
2822 }
2823 remove_wait_queue(&info->status_event_wait_q, &wait);
2824 set_current_state(TASK_RUNNING);
2825 return rc;
2826 }
2827
2828 /* return the state of the serial control and status signals
2829 */
2830 static int tiocmget(struct tty_struct *tty)
2831 {
2832 struct mgsl_struct *info = tty->driver_data;
2833 unsigned int result;
2834 unsigned long flags;
2835
2836 spin_lock_irqsave(&info->irq_spinlock,flags);
2837 usc_get_serial_signals(info);
2838 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2839
2840 result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
2841 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
2842 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
2843 ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
2844 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
2845 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
2846
2847 if (debug_level >= DEBUG_LEVEL_INFO)
2848 printk("%s(%d):%s tiocmget() value=%08X\n",
2849 __FILE__,__LINE__, info->device_name, result );
2850 return result;
2851 }
2852
2853 /* set modem control signals (DTR/RTS)
2854 */
2855 static int tiocmset(struct tty_struct *tty,
2856 unsigned int set, unsigned int clear)
2857 {
2858 struct mgsl_struct *info = tty->driver_data;
2859 unsigned long flags;
2860
2861 if (debug_level >= DEBUG_LEVEL_INFO)
2862 printk("%s(%d):%s tiocmset(%x,%x)\n",
2863 __FILE__,__LINE__,info->device_name, set, clear);
2864
2865 if (set & TIOCM_RTS)
2866 info->serial_signals |= SerialSignal_RTS;
2867 if (set & TIOCM_DTR)
2868 info->serial_signals |= SerialSignal_DTR;
2869 if (clear & TIOCM_RTS)
2870 info->serial_signals &= ~SerialSignal_RTS;
2871 if (clear & TIOCM_DTR)
2872 info->serial_signals &= ~SerialSignal_DTR;
2873
2874 spin_lock_irqsave(&info->irq_spinlock,flags);
2875 usc_set_serial_signals(info);
2876 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2877
2878 return 0;
2879 }
2880
2881 /* mgsl_break() Set or clear transmit break condition
2882 *
2883 * Arguments: tty pointer to tty instance data
2884 * break_state -1=set break condition, 0=clear
2885 * Return Value: error code
2886 */
2887 static int mgsl_break(struct tty_struct *tty, int break_state)
2888 {
2889 struct mgsl_struct * info = tty->driver_data;
2890 unsigned long flags;
2891
2892 if (debug_level >= DEBUG_LEVEL_INFO)
2893 printk("%s(%d):mgsl_break(%s,%d)\n",
2894 __FILE__,__LINE__, info->device_name, break_state);
2895
2896 if (mgsl_paranoia_check(info, tty->name, "mgsl_break"))
2897 return -EINVAL;
2898
2899 spin_lock_irqsave(&info->irq_spinlock,flags);
2900 if (break_state == -1)
2901 usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) | BIT7));
2902 else
2903 usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7));
2904 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2905 return 0;
2906
2907 } /* end of mgsl_break() */
2908
2909 /*
2910 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
2911 * Return: write counters to the user passed counter struct
2912 * NB: both 1->0 and 0->1 transitions are counted except for
2913 * RI where only 0->1 is counted.
2914 */
2915 static int msgl_get_icount(struct tty_struct *tty,
2916 struct serial_icounter_struct *icount)
2917
2918 {
2919 struct mgsl_struct * info = tty->driver_data;
2920 struct mgsl_icount cnow; /* kernel counter temps */
2921 unsigned long flags;
2922
2923 spin_lock_irqsave(&info->irq_spinlock,flags);
2924 cnow = info->icount;
2925 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2926
2927 icount->cts = cnow.cts;
2928 icount->dsr = cnow.dsr;
2929 icount->rng = cnow.rng;
2930 icount->dcd = cnow.dcd;
2931 icount->rx = cnow.rx;
2932 icount->tx = cnow.tx;
2933 icount->frame = cnow.frame;
2934 icount->overrun = cnow.overrun;
2935 icount->parity = cnow.parity;
2936 icount->brk = cnow.brk;
2937 icount->buf_overrun = cnow.buf_overrun;
2938 return 0;
2939 }
2940
2941 /* mgsl_ioctl() Service an IOCTL request
2942 *
2943 * Arguments:
2944 *
2945 * tty pointer to tty instance data
2946 * cmd IOCTL command code
2947 * arg command argument/context
2948 *
2949 * Return Value: 0 if success, otherwise error code
2950 */
2951 static int mgsl_ioctl(struct tty_struct *tty,
2952 unsigned int cmd, unsigned long arg)
2953 {
2954 struct mgsl_struct * info = tty->driver_data;
2955
2956 if (debug_level >= DEBUG_LEVEL_INFO)
2957 printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
2958 info->device_name, cmd );
2959
2960 if (mgsl_paranoia_check(info, tty->name, "mgsl_ioctl"))
2961 return -ENODEV;
2962
2963 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
2964 (cmd != TIOCMIWAIT)) {
2965 if (tty_io_error(tty))
2966 return -EIO;
2967 }
2968
2969 return mgsl_ioctl_common(info, cmd, arg);
2970 }
2971
2972 static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
2973 {
2974 void __user *argp = (void __user *)arg;
2975
2976 switch (cmd) {
2977 case MGSL_IOCGPARAMS:
2978 return mgsl_get_params(info, argp);
2979 case MGSL_IOCSPARAMS:
2980 return mgsl_set_params(info, argp);
2981 case MGSL_IOCGTXIDLE:
2982 return mgsl_get_txidle(info, argp);
2983 case MGSL_IOCSTXIDLE:
2984 return mgsl_set_txidle(info,(int)arg);
2985 case MGSL_IOCTXENABLE:
2986 return mgsl_txenable(info,(int)arg);
2987 case MGSL_IOCRXENABLE:
2988 return mgsl_rxenable(info,(int)arg);
2989 case MGSL_IOCTXABORT:
2990 return mgsl_txabort(info);
2991 case MGSL_IOCGSTATS:
2992 return mgsl_get_stats(info, argp);
2993 case MGSL_IOCWAITEVENT:
2994 return mgsl_wait_event(info, argp);
2995 case MGSL_IOCLOOPTXDONE:
2996 return mgsl_loopmode_send_done(info);
2997 /* Wait for modem input (DCD,RI,DSR,CTS) change
2998 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
2999 */
3000 case TIOCMIWAIT:
3001 return modem_input_wait(info,(int)arg);
3002
3003 default:
3004 return -ENOIOCTLCMD;
3005 }
3006 return 0;
3007 }
3008
3009 /* mgsl_set_termios()
3010 *
3011 * Set new termios settings
3012 *
3013 * Arguments:
3014 *
3015 * tty pointer to tty structure
3016 * termios pointer to buffer to hold returned old termios
3017 *
3018 * Return Value: None
3019 */
3020 static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
3021 {
3022 struct mgsl_struct *info = tty->driver_data;
3023 unsigned long flags;
3024
3025 if (debug_level >= DEBUG_LEVEL_INFO)
3026 printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__,
3027 tty->driver->name );
3028
3029 mgsl_change_params(info);
3030
3031 /* Handle transition to B0 status */
3032 if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
3033 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
3034 spin_lock_irqsave(&info->irq_spinlock,flags);
3035 usc_set_serial_signals(info);
3036 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3037 }
3038
3039 /* Handle transition away from B0 status */
3040 if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
3041 info->serial_signals |= SerialSignal_DTR;
3042 if (!C_CRTSCTS(tty) || !tty_throttled(tty))
3043 info->serial_signals |= SerialSignal_RTS;
3044 spin_lock_irqsave(&info->irq_spinlock,flags);
3045 usc_set_serial_signals(info);
3046 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3047 }
3048
3049 /* Handle turning off CRTSCTS */
3050 if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) {
3051 tty->hw_stopped = 0;
3052 mgsl_start(tty);
3053 }
3054
3055 } /* end of mgsl_set_termios() */
3056
3057 /* mgsl_close()
3058 *
3059 * Called when port is closed. Wait for remaining data to be
3060 * sent. Disable port and free resources.
3061 *
3062 * Arguments:
3063 *
3064 * tty pointer to open tty structure
3065 * filp pointer to open file object
3066 *
3067 * Return Value: None
3068 */
3069 static void mgsl_close(struct tty_struct *tty, struct file * filp)
3070 {
3071 struct mgsl_struct * info = tty->driver_data;
3072
3073 if (mgsl_paranoia_check(info, tty->name, "mgsl_close"))
3074 return;
3075
3076 if (debug_level >= DEBUG_LEVEL_INFO)
3077 printk("%s(%d):mgsl_close(%s) entry, count=%d\n",
3078 __FILE__,__LINE__, info->device_name, info->port.count);
3079
3080 if (tty_port_close_start(&info->port, tty, filp) == 0)
3081 goto cleanup;
3082
3083 mutex_lock(&info->port.mutex);
3084 if (tty_port_initialized(&info->port))
3085 mgsl_wait_until_sent(tty, info->timeout);
3086 mgsl_flush_buffer(tty);
3087 tty_ldisc_flush(tty);
3088 shutdown(info);
3089 mutex_unlock(&info->port.mutex);
3090
3091 tty_port_close_end(&info->port, tty);
3092 info->port.tty = NULL;
3093 cleanup:
3094 if (debug_level >= DEBUG_LEVEL_INFO)
3095 printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__,
3096 tty->driver->name, info->port.count);
3097
3098 } /* end of mgsl_close() */
3099
3100 /* mgsl_wait_until_sent()
3101 *
3102 * Wait until the transmitter is empty.
3103 *
3104 * Arguments:
3105 *
3106 * tty pointer to tty info structure
3107 * timeout time to wait for send completion
3108 *
3109 * Return Value: None
3110 */
3111 static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
3112 {
3113 struct mgsl_struct * info = tty->driver_data;
3114 unsigned long orig_jiffies, char_time;
3115
3116 if (!info )
3117 return;
3118
3119 if (debug_level >= DEBUG_LEVEL_INFO)
3120 printk("%s(%d):mgsl_wait_until_sent(%s) entry\n",
3121 __FILE__,__LINE__, info->device_name );
3122
3123 if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent"))
3124 return;
3125
3126 if (!tty_port_initialized(&info->port))
3127 goto exit;
3128
3129 orig_jiffies = jiffies;
3130
3131 /* Set check interval to 1/5 of estimated time to
3132 * send a character, and make it at least 1. The check
3133 * interval should also be less than the timeout.
3134 * Note: use tight timings here to satisfy the NIST-PCTS.
3135 */
3136
3137 if ( info->params.data_rate ) {
3138 char_time = info->timeout/(32 * 5);
3139 if (!char_time)
3140 char_time++;
3141 } else
3142 char_time = 1;
3143
3144 if (timeout)
3145 char_time = min_t(unsigned long, char_time, timeout);
3146
3147 if ( info->params.mode == MGSL_MODE_HDLC ||
3148 info->params.mode == MGSL_MODE_RAW ) {
3149 while (info->tx_active) {
3150 msleep_interruptible(jiffies_to_msecs(char_time));
3151 if (signal_pending(current))
3152 break;
3153 if (timeout && time_after(jiffies, orig_jiffies + timeout))
3154 break;
3155 }
3156 } else {
3157 while (!(usc_InReg(info,TCSR) & TXSTATUS_ALL_SENT) &&
3158 info->tx_enabled) {
3159 msleep_interruptible(jiffies_to_msecs(char_time));
3160 if (signal_pending(current))
3161 break;
3162 if (timeout && time_after(jiffies, orig_jiffies + timeout))
3163 break;
3164 }
3165 }
3166
3167 exit:
3168 if (debug_level >= DEBUG_LEVEL_INFO)
3169 printk("%s(%d):mgsl_wait_until_sent(%s) exit\n",
3170 __FILE__,__LINE__, info->device_name );
3171
3172 } /* end of mgsl_wait_until_sent() */
3173
3174 /* mgsl_hangup()
3175 *
3176 * Called by tty_hangup() when a hangup is signaled.
3177 * This is the same as to closing all open files for the port.
3178 *
3179 * Arguments: tty pointer to associated tty object
3180 * Return Value: None
3181 */
3182 static void mgsl_hangup(struct tty_struct *tty)
3183 {
3184 struct mgsl_struct * info = tty->driver_data;
3185
3186 if (debug_level >= DEBUG_LEVEL_INFO)
3187 printk("%s(%d):mgsl_hangup(%s)\n",
3188 __FILE__,__LINE__, info->device_name );
3189
3190 if (mgsl_paranoia_check(info, tty->name, "mgsl_hangup"))
3191 return;
3192
3193 mgsl_flush_buffer(tty);
3194 shutdown(info);
3195
3196 info->port.count = 0;
3197 tty_port_set_active(&info->port, 0);
3198 info->port.tty = NULL;
3199
3200 wake_up_interruptible(&info->port.open_wait);
3201
3202 } /* end of mgsl_hangup() */
3203
3204 /*
3205 * carrier_raised()
3206 *
3207 * Return true if carrier is raised
3208 */
3209
3210 static int carrier_raised(struct tty_port *port)
3211 {
3212 unsigned long flags;
3213 struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
3214
3215 spin_lock_irqsave(&info->irq_spinlock, flags);
3216 usc_get_serial_signals(info);
3217 spin_unlock_irqrestore(&info->irq_spinlock, flags);
3218 return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
3219 }
3220
3221 static void dtr_rts(struct tty_port *port, int on)
3222 {
3223 struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
3224 unsigned long flags;
3225
3226 spin_lock_irqsave(&info->irq_spinlock,flags);
3227 if (on)
3228 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
3229 else
3230 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
3231 usc_set_serial_signals(info);
3232 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3233 }
3234
3235
3236 /* block_til_ready()
3237 *
3238 * Block the current process until the specified port
3239 * is ready to be opened.
3240 *
3241 * Arguments:
3242 *
3243 * tty pointer to tty info structure
3244 * filp pointer to open file object
3245 * info pointer to device instance data
3246 *
3247 * Return Value: 0 if success, otherwise error code
3248 */
3249 static int block_til_ready(struct tty_struct *tty, struct file * filp,
3250 struct mgsl_struct *info)
3251 {
3252 DECLARE_WAITQUEUE(wait, current);
3253 int retval;
3254 bool do_clocal = false;
3255 unsigned long flags;
3256 int dcd;
3257 struct tty_port *port = &info->port;
3258
3259 if (debug_level >= DEBUG_LEVEL_INFO)
3260 printk("%s(%d):block_til_ready on %s\n",
3261 __FILE__,__LINE__, tty->driver->name );
3262
3263 if (filp->f_flags & O_NONBLOCK || tty_io_error(tty)) {
3264 /* nonblock mode is set or port is not enabled */
3265 tty_port_set_active(port, 1);
3266 return 0;
3267 }
3268
3269 if (C_CLOCAL(tty))
3270 do_clocal = true;
3271
3272 /* Wait for carrier detect and the line to become
3273 * free (i.e., not in use by the callout). While we are in
3274 * this loop, port->count is dropped by one, so that
3275 * mgsl_close() knows when to free things. We restore it upon
3276 * exit, either normal or abnormal.
3277 */
3278
3279 retval = 0;
3280 add_wait_queue(&port->open_wait, &wait);
3281
3282 if (debug_level >= DEBUG_LEVEL_INFO)
3283 printk("%s(%d):block_til_ready before block on %s count=%d\n",
3284 __FILE__,__LINE__, tty->driver->name, port->count );
3285
3286 spin_lock_irqsave(&info->irq_spinlock, flags);
3287 port->count--;
3288 spin_unlock_irqrestore(&info->irq_spinlock, flags);
3289 port->blocked_open++;
3290
3291 while (1) {
3292 if (C_BAUD(tty) && tty_port_initialized(port))
3293 tty_port_raise_dtr_rts(port);
3294
3295 set_current_state(TASK_INTERRUPTIBLE);
3296
3297 if (tty_hung_up_p(filp) || !tty_port_initialized(port)) {
3298 retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3299 -EAGAIN : -ERESTARTSYS;
3300 break;
3301 }
3302
3303 dcd = tty_port_carrier_raised(&info->port);
3304 if (do_clocal || dcd)
3305 break;
3306
3307 if (signal_pending(current)) {
3308 retval = -ERESTARTSYS;
3309 break;
3310 }
3311
3312 if (debug_level >= DEBUG_LEVEL_INFO)
3313 printk("%s(%d):block_til_ready blocking on %s count=%d\n",
3314 __FILE__,__LINE__, tty->driver->name, port->count );
3315
3316 tty_unlock(tty);
3317 schedule();
3318 tty_lock(tty);
3319 }
3320
3321 set_current_state(TASK_RUNNING);
3322 remove_wait_queue(&port->open_wait, &wait);
3323
3324 /* FIXME: Racy on hangup during close wait */
3325 if (!tty_hung_up_p(filp))
3326 port->count++;
3327 port->blocked_open--;
3328
3329 if (debug_level >= DEBUG_LEVEL_INFO)
3330 printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
3331 __FILE__,__LINE__, tty->driver->name, port->count );
3332
3333 if (!retval)
3334 tty_port_set_active(port, 1);
3335
3336 return retval;
3337
3338 } /* end of block_til_ready() */
3339
3340 static int mgsl_install(struct tty_driver *driver, struct tty_struct *tty)
3341 {
3342 struct mgsl_struct *info;
3343 int line = tty->index;
3344
3345 /* verify range of specified line number */
3346 if (line >= mgsl_device_count) {
3347 printk("%s(%d):mgsl_open with invalid line #%d.\n",
3348 __FILE__, __LINE__, line);
3349 return -ENODEV;
3350 }
3351
3352 /* find the info structure for the specified line */
3353 info = mgsl_device_list;
3354 while (info && info->line != line)
3355 info = info->next_device;
3356 if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
3357 return -ENODEV;
3358 tty->driver_data = info;
3359
3360 return tty_port_install(&info->port, driver, tty);
3361 }
3362
3363 /* mgsl_open()
3364 *
3365 * Called when a port is opened. Init and enable port.
3366 * Perform serial-specific initialization for the tty structure.
3367 *
3368 * Arguments: tty pointer to tty info structure
3369 * filp associated file pointer
3370 *
3371 * Return Value: 0 if success, otherwise error code
3372 */
3373 static int mgsl_open(struct tty_struct *tty, struct file * filp)
3374 {
3375 struct mgsl_struct *info = tty->driver_data;
3376 unsigned long flags;
3377 int retval;
3378
3379 info->port.tty = tty;
3380
3381 if (debug_level >= DEBUG_LEVEL_INFO)
3382 printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
3383 __FILE__,__LINE__,tty->driver->name, info->port.count);
3384
3385 info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
3386
3387 spin_lock_irqsave(&info->netlock, flags);
3388 if (info->netcount) {
3389 retval = -EBUSY;
3390 spin_unlock_irqrestore(&info->netlock, flags);
3391 goto cleanup;
3392 }
3393 info->port.count++;
3394 spin_unlock_irqrestore(&info->netlock, flags);
3395
3396 if (info->port.count == 1) {
3397 /* 1st open on this device, init hardware */
3398 retval = startup(info);
3399 if (retval < 0)
3400 goto cleanup;
3401 }
3402
3403 retval = block_til_ready(tty, filp, info);
3404 if (retval) {
3405 if (debug_level >= DEBUG_LEVEL_INFO)
3406 printk("%s(%d):block_til_ready(%s) returned %d\n",
3407 __FILE__,__LINE__, info->device_name, retval);
3408 goto cleanup;
3409 }
3410
3411 if (debug_level >= DEBUG_LEVEL_INFO)
3412 printk("%s(%d):mgsl_open(%s) success\n",
3413 __FILE__,__LINE__, info->device_name);
3414 retval = 0;
3415
3416 cleanup:
3417 if (retval) {
3418 if (tty->count == 1)
3419 info->port.tty = NULL; /* tty layer will release tty struct */
3420 if(info->port.count)
3421 info->port.count--;
3422 }
3423
3424 return retval;
3425
3426 } /* end of mgsl_open() */
3427
3428 /*
3429 * /proc fs routines....
3430 */
3431
3432 static inline void line_info(struct seq_file *m, struct mgsl_struct *info)
3433 {
3434 char stat_buf[30];
3435 unsigned long flags;
3436
3437 if (info->bus_type == MGSL_BUS_TYPE_PCI) {
3438 seq_printf(m, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X",
3439 info->device_name, info->io_base, info->irq_level,
3440 info->phys_memory_base, info->phys_lcr_base);
3441 } else {
3442 seq_printf(m, "%s:(E)ISA io:%04X irq:%d dma:%d",
3443 info->device_name, info->io_base,
3444 info->irq_level, info->dma_level);
3445 }
3446
3447 /* output current serial signal states */
3448 spin_lock_irqsave(&info->irq_spinlock,flags);
3449 usc_get_serial_signals(info);
3450 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3451
3452 stat_buf[0] = 0;
3453 stat_buf[1] = 0;
3454 if (info->serial_signals & SerialSignal_RTS)
3455 strcat(stat_buf, "|RTS");
3456 if (info->serial_signals & SerialSignal_CTS)
3457 strcat(stat_buf, "|CTS");
3458 if (info->serial_signals & SerialSignal_DTR)
3459 strcat(stat_buf, "|DTR");
3460 if (info->serial_signals & SerialSignal_DSR)
3461 strcat(stat_buf, "|DSR");
3462 if (info->serial_signals & SerialSignal_DCD)
3463 strcat(stat_buf, "|CD");
3464 if (info->serial_signals & SerialSignal_RI)
3465 strcat(stat_buf, "|RI");
3466
3467 if (info->params.mode == MGSL_MODE_HDLC ||
3468 info->params.mode == MGSL_MODE_RAW ) {
3469 seq_printf(m, " HDLC txok:%d rxok:%d",
3470 info->icount.txok, info->icount.rxok);
3471 if (info->icount.txunder)
3472 seq_printf(m, " txunder:%d", info->icount.txunder);
3473 if (info->icount.txabort)
3474 seq_printf(m, " txabort:%d", info->icount.txabort);
3475 if (info->icount.rxshort)
3476 seq_printf(m, " rxshort:%d", info->icount.rxshort);
3477 if (info->icount.rxlong)
3478 seq_printf(m, " rxlong:%d", info->icount.rxlong);
3479 if (info->icount.rxover)
3480 seq_printf(m, " rxover:%d", info->icount.rxover);
3481 if (info->icount.rxcrc)
3482 seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
3483 } else {
3484 seq_printf(m, " ASYNC tx:%d rx:%d",
3485 info->icount.tx, info->icount.rx);
3486 if (info->icount.frame)
3487 seq_printf(m, " fe:%d", info->icount.frame);
3488 if (info->icount.parity)
3489 seq_printf(m, " pe:%d", info->icount.parity);
3490 if (info->icount.brk)
3491 seq_printf(m, " brk:%d", info->icount.brk);
3492 if (info->icount.overrun)
3493 seq_printf(m, " oe:%d", info->icount.overrun);
3494 }
3495
3496 /* Append serial signal status to end */
3497 seq_printf(m, " %s\n", stat_buf+1);
3498
3499 seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
3500 info->tx_active,info->bh_requested,info->bh_running,
3501 info->pending_bh);
3502
3503 spin_lock_irqsave(&info->irq_spinlock,flags);
3504 {
3505 u16 Tcsr = usc_InReg( info, TCSR );
3506 u16 Tdmr = usc_InDmaReg( info, TDMR );
3507 u16 Ticr = usc_InReg( info, TICR );
3508 u16 Rscr = usc_InReg( info, RCSR );
3509 u16 Rdmr = usc_InDmaReg( info, RDMR );
3510 u16 Ricr = usc_InReg( info, RICR );
3511 u16 Icr = usc_InReg( info, ICR );
3512 u16 Dccr = usc_InReg( info, DCCR );
3513 u16 Tmr = usc_InReg( info, TMR );
3514 u16 Tccr = usc_InReg( info, TCCR );
3515 u16 Ccar = inw( info->io_base + CCAR );
3516 seq_printf(m, "tcsr=%04X tdmr=%04X ticr=%04X rcsr=%04X rdmr=%04X\n"
3517 "ricr=%04X icr =%04X dccr=%04X tmr=%04X tccr=%04X ccar=%04X\n",
3518 Tcsr,Tdmr,Ticr,Rscr,Rdmr,Ricr,Icr,Dccr,Tmr,Tccr,Ccar );
3519 }
3520 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3521 }
3522
3523 /* Called to print information about devices */
3524 static int mgsl_proc_show(struct seq_file *m, void *v)
3525 {
3526 struct mgsl_struct *info;
3527
3528 seq_printf(m, "synclink driver:%s\n", driver_version);
3529
3530 info = mgsl_device_list;
3531 while( info ) {
3532 line_info(m, info);
3533 info = info->next_device;
3534 }
3535 return 0;
3536 }
3537
3538 static int mgsl_proc_open(struct inode *inode, struct file *file)
3539 {
3540 return single_open(file, mgsl_proc_show, NULL);
3541 }
3542
3543 static const struct file_operations mgsl_proc_fops = {
3544 .owner = THIS_MODULE,
3545 .open = mgsl_proc_open,
3546 .read = seq_read,
3547 .llseek = seq_lseek,
3548 .release = single_release,
3549 };
3550
3551 /* mgsl_allocate_dma_buffers()
3552 *
3553 * Allocate and format DMA buffers (ISA adapter)
3554 * or format shared memory buffers (PCI adapter).
3555 *
3556 * Arguments: info pointer to device instance data
3557 * Return Value: 0 if success, otherwise error
3558 */
3559 static int mgsl_allocate_dma_buffers(struct mgsl_struct *info)
3560 {
3561 unsigned short BuffersPerFrame;
3562
3563 info->last_mem_alloc = 0;
3564
3565 /* Calculate the number of DMA buffers necessary to hold the */
3566 /* largest allowable frame size. Note: If the max frame size is */
3567 /* not an even multiple of the DMA buffer size then we need to */
3568 /* round the buffer count per frame up one. */
3569
3570 BuffersPerFrame = (unsigned short)(info->max_frame_size/DMABUFFERSIZE);
3571 if ( info->max_frame_size % DMABUFFERSIZE )
3572 BuffersPerFrame++;
3573
3574 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3575 /*
3576 * The PCI adapter has 256KBytes of shared memory to use.
3577 * This is 64 PAGE_SIZE buffers.
3578 *
3579 * The first page is used for padding at this time so the
3580 * buffer list does not begin at offset 0 of the PCI
3581 * adapter's shared memory.
3582 *
3583 * The 2nd page is used for the buffer list. A 4K buffer
3584 * list can hold 128 DMA_BUFFER structures at 32 bytes
3585 * each.
3586 *
3587 * This leaves 62 4K pages.
3588 *
3589 * The next N pages are used for transmit frame(s). We
3590 * reserve enough 4K page blocks to hold the required
3591 * number of transmit dma buffers (num_tx_dma_buffers),
3592 * each of MaxFrameSize size.
3593 *
3594 * Of the remaining pages (62-N), determine how many can
3595 * be used to receive full MaxFrameSize inbound frames
3596 */
3597 info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
3598 info->rx_buffer_count = 62 - info->tx_buffer_count;
3599 } else {
3600 /* Calculate the number of PAGE_SIZE buffers needed for */
3601 /* receive and transmit DMA buffers. */
3602
3603
3604 /* Calculate the number of DMA buffers necessary to */
3605 /* hold 7 max size receive frames and one max size transmit frame. */
3606 /* The receive buffer count is bumped by one so we avoid an */
3607 /* End of List condition if all receive buffers are used when */
3608 /* using linked list DMA buffers. */
3609
3610 info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
3611 info->rx_buffer_count = (BuffersPerFrame * MAXRXFRAMES) + 6;
3612
3613 /*
3614 * limit total TxBuffers & RxBuffers to 62 4K total
3615 * (ala PCI Allocation)
3616 */
3617
3618 if ( (info->tx_buffer_count + info->rx_buffer_count) > 62 )
3619 info->rx_buffer_count = 62 - info->tx_buffer_count;
3620
3621 }
3622
3623 if ( debug_level >= DEBUG_LEVEL_INFO )
3624 printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n",
3625 __FILE__,__LINE__, info->tx_buffer_count,info->rx_buffer_count);
3626
3627 if ( mgsl_alloc_buffer_list_memory( info ) < 0 ||
3628 mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 ||
3629 mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 ||
3630 mgsl_alloc_intermediate_rxbuffer_memory(info) < 0 ||
3631 mgsl_alloc_intermediate_txbuffer_memory(info) < 0 ) {
3632 printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__);
3633 return -ENOMEM;
3634 }
3635
3636 mgsl_reset_rx_dma_buffers( info );
3637 mgsl_reset_tx_dma_buffers( info );
3638
3639 return 0;
3640
3641 } /* end of mgsl_allocate_dma_buffers() */
3642
3643 /*
3644 * mgsl_alloc_buffer_list_memory()
3645 *
3646 * Allocate a common DMA buffer for use as the
3647 * receive and transmit buffer lists.
3648 *
3649 * A buffer list is a set of buffer entries where each entry contains
3650 * a pointer to an actual buffer and a pointer to the next buffer entry
3651 * (plus some other info about the buffer).
3652 *
3653 * The buffer entries for a list are built to form a circular list so
3654 * that when the entire list has been traversed you start back at the
3655 * beginning.
3656 *
3657 * This function allocates memory for just the buffer entries.
3658 * The links (pointer to next entry) are filled in with the physical
3659 * address of the next entry so the adapter can navigate the list
3660 * using bus master DMA. The pointers to the actual buffers are filled
3661 * out later when the actual buffers are allocated.
3662 *
3663 * Arguments: info pointer to device instance data
3664 * Return Value: 0 if success, otherwise error
3665 */
3666 static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info )
3667 {
3668 unsigned int i;
3669
3670 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3671 /* PCI adapter uses shared memory. */
3672 info->buffer_list = info->memory_base + info->last_mem_alloc;
3673 info->buffer_list_phys = info->last_mem_alloc;
3674 info->last_mem_alloc += BUFFERLISTSIZE;
3675 } else {
3676 /* ISA adapter uses system memory. */
3677 /* The buffer lists are allocated as a common buffer that both */
3678 /* the processor and adapter can access. This allows the driver to */
3679 /* inspect portions of the buffer while other portions are being */
3680 /* updated by the adapter using Bus Master DMA. */
3681
3682 info->buffer_list = dma_alloc_coherent(NULL, BUFFERLISTSIZE, &info->buffer_list_dma_addr, GFP_KERNEL);
3683 if (info->buffer_list == NULL)
3684 return -ENOMEM;
3685 info->buffer_list_phys = (u32)(info->buffer_list_dma_addr);
3686 }
3687
3688 /* We got the memory for the buffer entry lists. */
3689 /* Initialize the memory block to all zeros. */
3690 memset( info->buffer_list, 0, BUFFERLISTSIZE );
3691
3692 /* Save virtual address pointers to the receive and */
3693 /* transmit buffer lists. (Receive 1st). These pointers will */
3694 /* be used by the processor to access the lists. */
3695 info->rx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
3696 info->tx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
3697 info->tx_buffer_list += info->rx_buffer_count;
3698
3699 /*
3700 * Build the links for the buffer entry lists such that
3701 * two circular lists are built. (Transmit and Receive).
3702 *
3703 * Note: the links are physical addresses
3704 * which are read by the adapter to determine the next
3705 * buffer entry to use.
3706 */
3707
3708 for ( i = 0; i < info->rx_buffer_count; i++ ) {
3709 /* calculate and store physical address of this buffer entry */
3710 info->rx_buffer_list[i].phys_entry =
3711 info->buffer_list_phys + (i * sizeof(DMABUFFERENTRY));
3712
3713 /* calculate and store physical address of */
3714 /* next entry in cirular list of entries */
3715
3716 info->rx_buffer_list[i].link = info->buffer_list_phys;
3717
3718 if ( i < info->rx_buffer_count - 1 )
3719 info->rx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
3720 }
3721
3722 for ( i = 0; i < info->tx_buffer_count; i++ ) {
3723 /* calculate and store physical address of this buffer entry */
3724 info->tx_buffer_list[i].phys_entry = info->buffer_list_phys +
3725 ((info->rx_buffer_count + i) * sizeof(DMABUFFERENTRY));
3726
3727 /* calculate and store physical address of */
3728 /* next entry in cirular list of entries */
3729
3730 info->tx_buffer_list[i].link = info->buffer_list_phys +
3731 info->rx_buffer_count * sizeof(DMABUFFERENTRY);
3732
3733 if ( i < info->tx_buffer_count - 1 )
3734 info->tx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
3735 }
3736
3737 return 0;
3738
3739 } /* end of mgsl_alloc_buffer_list_memory() */
3740
3741 /* Free DMA buffers allocated for use as the
3742 * receive and transmit buffer lists.
3743 * Warning:
3744 *
3745 * The data transfer buffers associated with the buffer list
3746 * MUST be freed before freeing the buffer list itself because
3747 * the buffer list contains the information necessary to free
3748 * the individual buffers!
3749 */
3750 static void mgsl_free_buffer_list_memory( struct mgsl_struct *info )
3751 {
3752 if (info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI)
3753 dma_free_coherent(NULL, BUFFERLISTSIZE, info->buffer_list, info->buffer_list_dma_addr);
3754
3755 info->buffer_list = NULL;
3756 info->rx_buffer_list = NULL;
3757 info->tx_buffer_list = NULL;
3758
3759 } /* end of mgsl_free_buffer_list_memory() */
3760
3761 /*
3762 * mgsl_alloc_frame_memory()
3763 *
3764 * Allocate the frame DMA buffers used by the specified buffer list.
3765 * Each DMA buffer will be one memory page in size. This is necessary
3766 * because memory can fragment enough that it may be impossible
3767 * contiguous pages.
3768 *
3769 * Arguments:
3770 *
3771 * info pointer to device instance data
3772 * BufferList pointer to list of buffer entries
3773 * Buffercount count of buffer entries in buffer list
3774 *
3775 * Return Value: 0 if success, otherwise -ENOMEM
3776 */
3777 static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount)
3778 {
3779 int i;
3780 u32 phys_addr;
3781
3782 /* Allocate page sized buffers for the receive buffer list */
3783
3784 for ( i = 0; i < Buffercount; i++ ) {
3785 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3786 /* PCI adapter uses shared memory buffers. */
3787 BufferList[i].virt_addr = info->memory_base + info->last_mem_alloc;
3788 phys_addr = info->last_mem_alloc;
3789 info->last_mem_alloc += DMABUFFERSIZE;
3790 } else {
3791 /* ISA adapter uses system memory. */
3792 BufferList[i].virt_addr = dma_alloc_coherent(NULL, DMABUFFERSIZE, &BufferList[i].dma_addr, GFP_KERNEL);
3793 if (BufferList[i].virt_addr == NULL)
3794 return -ENOMEM;
3795 phys_addr = (u32)(BufferList[i].dma_addr);
3796 }
3797 BufferList[i].phys_addr = phys_addr;
3798 }
3799
3800 return 0;
3801
3802 } /* end of mgsl_alloc_frame_memory() */
3803
3804 /*
3805 * mgsl_free_frame_memory()
3806 *
3807 * Free the buffers associated with
3808 * each buffer entry of a buffer list.
3809 *
3810 * Arguments:
3811 *
3812 * info pointer to device instance data
3813 * BufferList pointer to list of buffer entries
3814 * Buffercount count of buffer entries in buffer list
3815 *
3816 * Return Value: None
3817 */
3818 static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList, int Buffercount)
3819 {
3820 int i;
3821
3822 if ( BufferList ) {
3823 for ( i = 0 ; i < Buffercount ; i++ ) {
3824 if ( BufferList[i].virt_addr ) {
3825 if ( info->bus_type != MGSL_BUS_TYPE_PCI )
3826 dma_free_coherent(NULL, DMABUFFERSIZE, BufferList[i].virt_addr, BufferList[i].dma_addr);
3827 BufferList[i].virt_addr = NULL;
3828 }
3829 }
3830 }
3831
3832 } /* end of mgsl_free_frame_memory() */
3833
3834 /* mgsl_free_dma_buffers()
3835 *
3836 * Free DMA buffers
3837 *
3838 * Arguments: info pointer to device instance data
3839 * Return Value: None
3840 */
3841 static void mgsl_free_dma_buffers( struct mgsl_struct *info )
3842 {
3843 mgsl_free_frame_memory( info, info->rx_buffer_list, info->rx_buffer_count );
3844 mgsl_free_frame_memory( info, info->tx_buffer_list, info->tx_buffer_count );
3845 mgsl_free_buffer_list_memory( info );
3846
3847 } /* end of mgsl_free_dma_buffers() */
3848
3849
3850 /*
3851 * mgsl_alloc_intermediate_rxbuffer_memory()
3852 *
3853 * Allocate a buffer large enough to hold max_frame_size. This buffer
3854 * is used to pass an assembled frame to the line discipline.
3855 *
3856 * Arguments:
3857 *
3858 * info pointer to device instance data
3859 *
3860 * Return Value: 0 if success, otherwise -ENOMEM
3861 */
3862 static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info)
3863 {
3864 info->intermediate_rxbuffer = kmalloc(info->max_frame_size, GFP_KERNEL | GFP_DMA);
3865 if ( info->intermediate_rxbuffer == NULL )
3866 return -ENOMEM;
3867 /* unused flag buffer to satisfy receive_buf calling interface */
3868 info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL);
3869 if (!info->flag_buf) {
3870 kfree(info->intermediate_rxbuffer);
3871 info->intermediate_rxbuffer = NULL;
3872 return -ENOMEM;
3873 }
3874 return 0;
3875
3876 } /* end of mgsl_alloc_intermediate_rxbuffer_memory() */
3877
3878 /*
3879 * mgsl_free_intermediate_rxbuffer_memory()
3880 *
3881 *
3882 * Arguments:
3883 *
3884 * info pointer to device instance data
3885 *
3886 * Return Value: None
3887 */
3888 static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info)
3889 {
3890 kfree(info->intermediate_rxbuffer);
3891 info->intermediate_rxbuffer = NULL;
3892 kfree(info->flag_buf);
3893 info->flag_buf = NULL;
3894
3895 } /* end of mgsl_free_intermediate_rxbuffer_memory() */
3896
3897 /*
3898 * mgsl_alloc_intermediate_txbuffer_memory()
3899 *
3900 * Allocate intermdiate transmit buffer(s) large enough to hold max_frame_size.
3901 * This buffer is used to load transmit frames into the adapter's dma transfer
3902 * buffers when there is sufficient space.
3903 *
3904 * Arguments:
3905 *
3906 * info pointer to device instance data
3907 *
3908 * Return Value: 0 if success, otherwise -ENOMEM
3909 */
3910 static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info)
3911 {
3912 int i;
3913
3914 if ( debug_level >= DEBUG_LEVEL_INFO )
3915 printk("%s %s(%d) allocating %d tx holding buffers\n",
3916 info->device_name, __FILE__,__LINE__,info->num_tx_holding_buffers);
3917
3918 memset(info->tx_holding_buffers,0,sizeof(info->tx_holding_buffers));
3919
3920 for ( i=0; i<info->num_tx_holding_buffers; ++i) {
3921 info->tx_holding_buffers[i].buffer =
3922 kmalloc(info->max_frame_size, GFP_KERNEL);
3923 if (info->tx_holding_buffers[i].buffer == NULL) {
3924 for (--i; i >= 0; i--) {
3925 kfree(info->tx_holding_buffers[i].buffer);
3926 info->tx_holding_buffers[i].buffer = NULL;
3927 }
3928 return -ENOMEM;
3929 }
3930 }
3931
3932 return 0;
3933
3934 } /* end of mgsl_alloc_intermediate_txbuffer_memory() */
3935
3936 /*
3937 * mgsl_free_intermediate_txbuffer_memory()
3938 *
3939 *
3940 * Arguments:
3941 *
3942 * info pointer to device instance data
3943 *
3944 * Return Value: None
3945 */
3946 static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info)
3947 {
3948 int i;
3949
3950 for ( i=0; i<info->num_tx_holding_buffers; ++i ) {
3951 kfree(info->tx_holding_buffers[i].buffer);
3952 info->tx_holding_buffers[i].buffer = NULL;
3953 }
3954
3955 info->get_tx_holding_index = 0;
3956 info->put_tx_holding_index = 0;
3957 info->tx_holding_count = 0;
3958
3959 } /* end of mgsl_free_intermediate_txbuffer_memory() */
3960
3961
3962 /*
3963 * load_next_tx_holding_buffer()
3964 *
3965 * attempts to load the next buffered tx request into the
3966 * tx dma buffers
3967 *
3968 * Arguments:
3969 *
3970 * info pointer to device instance data
3971 *
3972 * Return Value: true if next buffered tx request loaded
3973 * into adapter's tx dma buffer,
3974 * false otherwise
3975 */
3976 static bool load_next_tx_holding_buffer(struct mgsl_struct *info)
3977 {
3978 bool ret = false;
3979
3980 if ( info->tx_holding_count ) {
3981 /* determine if we have enough tx dma buffers
3982 * to accommodate the next tx frame
3983 */
3984 struct tx_holding_buffer *ptx =
3985 &info->tx_holding_buffers[info->get_tx_holding_index];
3986 int num_free = num_free_tx_dma_buffers(info);
3987 int num_needed = ptx->buffer_size / DMABUFFERSIZE;
3988 if ( ptx->buffer_size % DMABUFFERSIZE )
3989 ++num_needed;
3990
3991 if (num_needed <= num_free) {
3992 info->xmit_cnt = ptx->buffer_size;
3993 mgsl_load_tx_dma_buffer(info,ptx->buffer,ptx->buffer_size);
3994
3995 --info->tx_holding_count;
3996 if ( ++info->get_tx_holding_index >= info->num_tx_holding_buffers)
3997 info->get_tx_holding_index=0;
3998
3999 /* restart transmit timer */
4000 mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000));
4001
4002 ret = true;
4003 }
4004 }
4005
4006 return ret;
4007 }
4008
4009 /*
4010 * save_tx_buffer_request()
4011 *
4012 * attempt to store transmit frame request for later transmission
4013 *
4014 * Arguments:
4015 *
4016 * info pointer to device instance data
4017 * Buffer pointer to buffer containing frame to load
4018 * BufferSize size in bytes of frame in Buffer
4019 *
4020 * Return Value: 1 if able to store, 0 otherwise
4021 */
4022 static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize)
4023 {
4024 struct tx_holding_buffer *ptx;
4025
4026 if ( info->tx_holding_count >= info->num_tx_holding_buffers ) {
4027 return 0; /* all buffers in use */
4028 }
4029
4030 ptx = &info->tx_holding_buffers[info->put_tx_holding_index];
4031 ptx->buffer_size = BufferSize;
4032 memcpy( ptx->buffer, Buffer, BufferSize);
4033
4034 ++info->tx_holding_count;
4035 if ( ++info->put_tx_holding_index >= info->num_tx_holding_buffers)
4036 info->put_tx_holding_index=0;
4037
4038 return 1;
4039 }
4040
4041 static int mgsl_claim_resources(struct mgsl_struct *info)
4042 {
4043 if (request_region(info->io_base,info->io_addr_size,"synclink") == NULL) {
4044 printk( "%s(%d):I/O address conflict on device %s Addr=%08X\n",
4045 __FILE__,__LINE__,info->device_name, info->io_base);
4046 return -ENODEV;
4047 }
4048 info->io_addr_requested = true;
4049
4050 if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags,
4051 info->device_name, info ) < 0 ) {
4052 printk( "%s(%d):Can't request interrupt on device %s IRQ=%d\n",
4053 __FILE__,__LINE__,info->device_name, info->irq_level );
4054 goto errout;
4055 }
4056 info->irq_requested = true;
4057
4058 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
4059 if (request_mem_region(info->phys_memory_base,0x40000,"synclink") == NULL) {
4060 printk( "%s(%d):mem addr conflict device %s Addr=%08X\n",
4061 __FILE__,__LINE__,info->device_name, info->phys_memory_base);
4062 goto errout;
4063 }
4064 info->shared_mem_requested = true;
4065 if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclink") == NULL) {
4066 printk( "%s(%d):lcr mem addr conflict device %s Addr=%08X\n",
4067 __FILE__,__LINE__,info->device_name, info->phys_lcr_base + info->lcr_offset);
4068 goto errout;
4069 }
4070 info->lcr_mem_requested = true;
4071
4072 info->memory_base = ioremap_nocache(info->phys_memory_base,
4073 0x40000);
4074 if (!info->memory_base) {
4075 printk( "%s(%d):Can't map shared memory on device %s MemAddr=%08X\n",
4076 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
4077 goto errout;
4078 }
4079
4080 if ( !mgsl_memory_test(info) ) {
4081 printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n",
4082 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
4083 goto errout;
4084 }
4085
4086 info->lcr_base = ioremap_nocache(info->phys_lcr_base,
4087 PAGE_SIZE);
4088 if (!info->lcr_base) {
4089 printk( "%s(%d):Can't map LCR memory on device %s MemAddr=%08X\n",
4090 __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
4091 goto errout;
4092 }
4093 info->lcr_base += info->lcr_offset;
4094
4095 } else {
4096 /* claim DMA channel */
4097
4098 if (request_dma(info->dma_level,info->device_name) < 0){
4099 printk( "%s(%d):Can't request DMA channel on device %s DMA=%d\n",
4100 __FILE__,__LINE__,info->device_name, info->dma_level );
4101 mgsl_release_resources( info );
4102 return -ENODEV;
4103 }
4104 info->dma_requested = true;
4105
4106 /* ISA adapter uses bus master DMA */
4107 set_dma_mode(info->dma_level,DMA_MODE_CASCADE);
4108 enable_dma(info->dma_level);
4109 }
4110
4111 if ( mgsl_allocate_dma_buffers(info) < 0 ) {
4112 printk( "%s(%d):Can't allocate DMA buffers on device %s DMA=%d\n",
4113 __FILE__,__LINE__,info->device_name, info->dma_level );
4114 goto errout;
4115 }
4116
4117 return 0;
4118 errout:
4119 mgsl_release_resources(info);
4120 return -ENODEV;
4121
4122 } /* end of mgsl_claim_resources() */
4123
4124 static void mgsl_release_resources(struct mgsl_struct *info)
4125 {
4126 if ( debug_level >= DEBUG_LEVEL_INFO )
4127 printk( "%s(%d):mgsl_release_resources(%s) entry\n",
4128 __FILE__,__LINE__,info->device_name );
4129
4130 if ( info->irq_requested ) {
4131 free_irq(info->irq_level, info);
4132 info->irq_requested = false;
4133 }
4134 if ( info->dma_requested ) {
4135 disable_dma(info->dma_level);
4136 free_dma(info->dma_level);
4137 info->dma_requested = false;
4138 }
4139 mgsl_free_dma_buffers(info);
4140 mgsl_free_intermediate_rxbuffer_memory(info);
4141 mgsl_free_intermediate_txbuffer_memory(info);
4142
4143 if ( info->io_addr_requested ) {
4144 release_region(info->io_base,info->io_addr_size);
4145 info->io_addr_requested = false;
4146 }
4147 if ( info->shared_mem_requested ) {
4148 release_mem_region(info->phys_memory_base,0x40000);
4149 info->shared_mem_requested = false;
4150 }
4151 if ( info->lcr_mem_requested ) {
4152 release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
4153 info->lcr_mem_requested = false;
4154 }
4155 if (info->memory_base){
4156 iounmap(info->memory_base);
4157 info->memory_base = NULL;
4158 }
4159 if (info->lcr_base){
4160 iounmap(info->lcr_base - info->lcr_offset);
4161 info->lcr_base = NULL;
4162 }
4163
4164 if ( debug_level >= DEBUG_LEVEL_INFO )
4165 printk( "%s(%d):mgsl_release_resources(%s) exit\n",
4166 __FILE__,__LINE__,info->device_name );
4167
4168 } /* end of mgsl_release_resources() */
4169
4170 /* mgsl_add_device()
4171 *
4172 * Add the specified device instance data structure to the
4173 * global linked list of devices and increment the device count.
4174 *
4175 * Arguments: info pointer to device instance data
4176 * Return Value: None
4177 */
4178 static void mgsl_add_device( struct mgsl_struct *info )
4179 {
4180 info->next_device = NULL;
4181 info->line = mgsl_device_count;
4182 sprintf(info->device_name,"ttySL%d",info->line);
4183
4184 if (info->line < MAX_TOTAL_DEVICES) {
4185 if (maxframe[info->line])
4186 info->max_frame_size = maxframe[info->line];
4187
4188 if (txdmabufs[info->line]) {
4189 info->num_tx_dma_buffers = txdmabufs[info->line];
4190 if (info->num_tx_dma_buffers < 1)
4191 info->num_tx_dma_buffers = 1;
4192 }
4193
4194 if (txholdbufs[info->line]) {
4195 info->num_tx_holding_buffers = txholdbufs[info->line];
4196 if (info->num_tx_holding_buffers < 1)
4197 info->num_tx_holding_buffers = 1;
4198 else if (info->num_tx_holding_buffers > MAX_TX_HOLDING_BUFFERS)
4199 info->num_tx_holding_buffers = MAX_TX_HOLDING_BUFFERS;
4200 }
4201 }
4202
4203 mgsl_device_count++;
4204
4205 if ( !mgsl_device_list )
4206 mgsl_device_list = info;
4207 else {
4208 struct mgsl_struct *current_dev = mgsl_device_list;
4209 while( current_dev->next_device )
4210 current_dev = current_dev->next_device;
4211 current_dev->next_device = info;
4212 }
4213
4214 if ( info->max_frame_size < 4096 )
4215 info->max_frame_size = 4096;
4216 else if ( info->max_frame_size > 65535 )
4217 info->max_frame_size = 65535;
4218
4219 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
4220 printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n",
4221 info->hw_version + 1, info->device_name, info->io_base, info->irq_level,
4222 info->phys_memory_base, info->phys_lcr_base,
4223 info->max_frame_size );
4224 } else {
4225 printk( "SyncLink ISA %s: IO=%04X IRQ=%d DMA=%d MaxFrameSize=%u\n",
4226 info->device_name, info->io_base, info->irq_level, info->dma_level,
4227 info->max_frame_size );
4228 }
4229
4230 #if SYNCLINK_GENERIC_HDLC
4231 hdlcdev_init(info);
4232 #endif
4233
4234 } /* end of mgsl_add_device() */
4235
4236 static const struct tty_port_operations mgsl_port_ops = {
4237 .carrier_raised = carrier_raised,
4238 .dtr_rts = dtr_rts,
4239 };
4240
4241
4242 /* mgsl_allocate_device()
4243 *
4244 * Allocate and initialize a device instance structure
4245 *
4246 * Arguments: none
4247 * Return Value: pointer to mgsl_struct if success, otherwise NULL
4248 */
4249 static struct mgsl_struct* mgsl_allocate_device(void)
4250 {
4251 struct mgsl_struct *info;
4252
4253 info = kzalloc(sizeof(struct mgsl_struct),
4254 GFP_KERNEL);
4255
4256 if (!info) {
4257 printk("Error can't allocate device instance data\n");
4258 } else {
4259 tty_port_init(&info->port);
4260 info->port.ops = &mgsl_port_ops;
4261 info->magic = MGSL_MAGIC;
4262 INIT_WORK(&info->task, mgsl_bh_handler);
4263 info->max_frame_size = 4096;
4264 info->port.close_delay = 5*HZ/10;
4265 info->port.closing_wait = 30*HZ;
4266 init_waitqueue_head(&info->status_event_wait_q);
4267 init_waitqueue_head(&info->event_wait_q);
4268 spin_lock_init(&info->irq_spinlock);
4269 spin_lock_init(&info->netlock);
4270 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
4271 info->idle_mode = HDLC_TXIDLE_FLAGS;
4272 info->num_tx_dma_buffers = 1;
4273 info->num_tx_holding_buffers = 0;
4274 }
4275
4276 return info;
4277
4278 } /* end of mgsl_allocate_device()*/
4279
4280 static const struct tty_operations mgsl_ops = {
4281 .install = mgsl_install,
4282 .open = mgsl_open,
4283 .close = mgsl_close,
4284 .write = mgsl_write,
4285 .put_char = mgsl_put_char,
4286 .flush_chars = mgsl_flush_chars,
4287 .write_room = mgsl_write_room,
4288 .chars_in_buffer = mgsl_chars_in_buffer,
4289 .flush_buffer = mgsl_flush_buffer,
4290 .ioctl = mgsl_ioctl,
4291 .throttle = mgsl_throttle,
4292 .unthrottle = mgsl_unthrottle,
4293 .send_xchar = mgsl_send_xchar,
4294 .break_ctl = mgsl_break,
4295 .wait_until_sent = mgsl_wait_until_sent,
4296 .set_termios = mgsl_set_termios,
4297 .stop = mgsl_stop,
4298 .start = mgsl_start,
4299 .hangup = mgsl_hangup,
4300 .tiocmget = tiocmget,
4301 .tiocmset = tiocmset,
4302 .get_icount = msgl_get_icount,
4303 .proc_fops = &mgsl_proc_fops,
4304 };
4305
4306 /*
4307 * perform tty device initialization
4308 */
4309 static int mgsl_init_tty(void)
4310 {
4311 int rc;
4312
4313 serial_driver = alloc_tty_driver(128);
4314 if (!serial_driver)
4315 return -ENOMEM;
4316
4317 serial_driver->driver_name = "synclink";
4318 serial_driver->name = "ttySL";
4319 serial_driver->major = ttymajor;
4320 serial_driver->minor_start = 64;
4321 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
4322 serial_driver->subtype = SERIAL_TYPE_NORMAL;
4323 serial_driver->init_termios = tty_std_termios;
4324 serial_driver->init_termios.c_cflag =
4325 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
4326 serial_driver->init_termios.c_ispeed = 9600;
4327 serial_driver->init_termios.c_ospeed = 9600;
4328 serial_driver->flags = TTY_DRIVER_REAL_RAW;
4329 tty_set_operations(serial_driver, &mgsl_ops);
4330 if ((rc = tty_register_driver(serial_driver)) < 0) {
4331 printk("%s(%d):Couldn't register serial driver\n",
4332 __FILE__,__LINE__);
4333 put_tty_driver(serial_driver);
4334 serial_driver = NULL;
4335 return rc;
4336 }
4337
4338 printk("%s %s, tty major#%d\n",
4339 driver_name, driver_version,
4340 serial_driver->major);
4341 return 0;
4342 }
4343
4344 /* enumerate user specified ISA adapters
4345 */
4346 static void mgsl_enum_isa_devices(void)
4347 {
4348 struct mgsl_struct *info;
4349 int i;
4350
4351 /* Check for user specified ISA devices */
4352
4353 for (i=0 ;(i < MAX_ISA_DEVICES) && io[i] && irq[i]; i++){
4354 if ( debug_level >= DEBUG_LEVEL_INFO )
4355 printk("ISA device specified io=%04X,irq=%d,dma=%d\n",
4356 io[i], irq[i], dma[i] );
4357
4358 info = mgsl_allocate_device();
4359 if ( !info ) {
4360 /* error allocating device instance data */
4361 if ( debug_level >= DEBUG_LEVEL_ERROR )
4362 printk( "can't allocate device instance data.\n");
4363 continue;
4364 }
4365
4366 /* Copy user configuration info to device instance data */
4367 info->io_base = (unsigned int)io[i];
4368 info->irq_level = (unsigned int)irq[i];
4369 info->irq_level = irq_canonicalize(info->irq_level);
4370 info->dma_level = (unsigned int)dma[i];
4371 info->bus_type = MGSL_BUS_TYPE_ISA;
4372 info->io_addr_size = 16;
4373 info->irq_flags = 0;
4374
4375 mgsl_add_device( info );
4376 }
4377 }
4378
4379 static void synclink_cleanup(void)
4380 {
4381 int rc;
4382 struct mgsl_struct *info;
4383 struct mgsl_struct *tmp;
4384
4385 printk("Unloading %s: %s\n", driver_name, driver_version);
4386
4387 if (serial_driver) {
4388 rc = tty_unregister_driver(serial_driver);
4389 if (rc)
4390 printk("%s(%d) failed to unregister tty driver err=%d\n",
4391 __FILE__,__LINE__,rc);
4392 put_tty_driver(serial_driver);
4393 }
4394
4395 info = mgsl_device_list;
4396 while(info) {
4397 #if SYNCLINK_GENERIC_HDLC
4398 hdlcdev_exit(info);
4399 #endif
4400 mgsl_release_resources(info);
4401 tmp = info;
4402 info = info->next_device;
4403 tty_port_destroy(&tmp->port);
4404 kfree(tmp);
4405 }
4406
4407 if (pci_registered)
4408 pci_unregister_driver(&synclink_pci_driver);
4409 }
4410
4411 static int __init synclink_init(void)
4412 {
4413 int rc;
4414
4415 if (break_on_load) {
4416 mgsl_get_text_ptr();
4417 BREAKPOINT();
4418 }
4419
4420 printk("%s %s\n", driver_name, driver_version);
4421
4422 mgsl_enum_isa_devices();
4423 if ((rc = pci_register_driver(&synclink_pci_driver)) < 0)
4424 printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
4425 else
4426 pci_registered = true;
4427
4428 if ((rc = mgsl_init_tty()) < 0)
4429 goto error;
4430
4431 return 0;
4432
4433 error:
4434 synclink_cleanup();
4435 return rc;
4436 }
4437
4438 static void __exit synclink_exit(void)
4439 {
4440 synclink_cleanup();
4441 }
4442
4443 module_init(synclink_init);
4444 module_exit(synclink_exit);
4445
4446 /*
4447 * usc_RTCmd()
4448 *
4449 * Issue a USC Receive/Transmit command to the
4450 * Channel Command/Address Register (CCAR).
4451 *
4452 * Notes:
4453 *
4454 * The command is encoded in the most significant 5 bits <15..11>
4455 * of the CCAR value. Bits <10..7> of the CCAR must be preserved
4456 * and Bits <6..0> must be written as zeros.
4457 *
4458 * Arguments:
4459 *
4460 * info pointer to device information structure
4461 * Cmd command mask (use symbolic macros)
4462 *
4463 * Return Value:
4464 *
4465 * None
4466 */
4467 static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd )
4468 {
4469 /* output command to CCAR in bits <15..11> */
4470 /* preserve bits <10..7>, bits <6..0> must be zero */
4471
4472 outw( Cmd + info->loopback_bits, info->io_base + CCAR );
4473
4474 /* Read to flush write to CCAR */
4475 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4476 inw( info->io_base + CCAR );
4477
4478 } /* end of usc_RTCmd() */
4479
4480 /*
4481 * usc_DmaCmd()
4482 *
4483 * Issue a DMA command to the DMA Command/Address Register (DCAR).
4484 *
4485 * Arguments:
4486 *
4487 * info pointer to device information structure
4488 * Cmd DMA command mask (usc_DmaCmd_XX Macros)
4489 *
4490 * Return Value:
4491 *
4492 * None
4493 */
4494 static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd )
4495 {
4496 /* write command mask to DCAR */
4497 outw( Cmd + info->mbre_bit, info->io_base );
4498
4499 /* Read to flush write to DCAR */
4500 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4501 inw( info->io_base );
4502
4503 } /* end of usc_DmaCmd() */
4504
4505 /*
4506 * usc_OutDmaReg()
4507 *
4508 * Write a 16-bit value to a USC DMA register
4509 *
4510 * Arguments:
4511 *
4512 * info pointer to device info structure
4513 * RegAddr register address (number) for write
4514 * RegValue 16-bit value to write to register
4515 *
4516 * Return Value:
4517 *
4518 * None
4519 *
4520 */
4521 static void usc_OutDmaReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
4522 {
4523 /* Note: The DCAR is located at the adapter base address */
4524 /* Note: must preserve state of BIT8 in DCAR */
4525
4526 outw( RegAddr + info->mbre_bit, info->io_base );
4527 outw( RegValue, info->io_base );
4528
4529 /* Read to flush write to DCAR */
4530 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4531 inw( info->io_base );
4532
4533 } /* end of usc_OutDmaReg() */
4534
4535 /*
4536 * usc_InDmaReg()
4537 *
4538 * Read a 16-bit value from a DMA register
4539 *
4540 * Arguments:
4541 *
4542 * info pointer to device info structure
4543 * RegAddr register address (number) to read from
4544 *
4545 * Return Value:
4546 *
4547 * The 16-bit value read from register
4548 *
4549 */
4550 static u16 usc_InDmaReg( struct mgsl_struct *info, u16 RegAddr )
4551 {
4552 /* Note: The DCAR is located at the adapter base address */
4553 /* Note: must preserve state of BIT8 in DCAR */
4554
4555 outw( RegAddr + info->mbre_bit, info->io_base );
4556 return inw( info->io_base );
4557
4558 } /* end of usc_InDmaReg() */
4559
4560 /*
4561 *
4562 * usc_OutReg()
4563 *
4564 * Write a 16-bit value to a USC serial channel register
4565 *
4566 * Arguments:
4567 *
4568 * info pointer to device info structure
4569 * RegAddr register address (number) to write to
4570 * RegValue 16-bit value to write to register
4571 *
4572 * Return Value:
4573 *
4574 * None
4575 *
4576 */
4577 static void usc_OutReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
4578 {
4579 outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
4580 outw( RegValue, info->io_base + CCAR );
4581
4582 /* Read to flush write to CCAR */
4583 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4584 inw( info->io_base + CCAR );
4585
4586 } /* end of usc_OutReg() */
4587
4588 /*
4589 * usc_InReg()
4590 *
4591 * Reads a 16-bit value from a USC serial channel register
4592 *
4593 * Arguments:
4594 *
4595 * info pointer to device extension
4596 * RegAddr register address (number) to read from
4597 *
4598 * Return Value:
4599 *
4600 * 16-bit value read from register
4601 */
4602 static u16 usc_InReg( struct mgsl_struct *info, u16 RegAddr )
4603 {
4604 outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
4605 return inw( info->io_base + CCAR );
4606
4607 } /* end of usc_InReg() */
4608
4609 /* usc_set_sdlc_mode()
4610 *
4611 * Set up the adapter for SDLC DMA communications.
4612 *
4613 * Arguments: info pointer to device instance data
4614 * Return Value: NONE
4615 */
4616 static void usc_set_sdlc_mode( struct mgsl_struct *info )
4617 {
4618 u16 RegValue;
4619 bool PreSL1660;
4620
4621 /*
4622 * determine if the IUSC on the adapter is pre-SL1660. If
4623 * not, take advantage of the UnderWait feature of more
4624 * modern chips. If an underrun occurs and this bit is set,
4625 * the transmitter will idle the programmed idle pattern
4626 * until the driver has time to service the underrun. Otherwise,
4627 * the dma controller may get the cycles previously requested
4628 * and begin transmitting queued tx data.
4629 */
4630 usc_OutReg(info,TMCR,0x1f);
4631 RegValue=usc_InReg(info,TMDR);
4632 PreSL1660 = (RegValue == IUSC_PRE_SL1660);
4633
4634 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
4635 {
4636 /*
4637 ** Channel Mode Register (CMR)
4638 **
4639 ** <15..14> 10 Tx Sub Modes, Send Flag on Underrun
4640 ** <13> 0 0 = Transmit Disabled (initially)
4641 ** <12> 0 1 = Consecutive Idles share common 0
4642 ** <11..8> 1110 Transmitter Mode = HDLC/SDLC Loop
4643 ** <7..4> 0000 Rx Sub Modes, addr/ctrl field handling
4644 ** <3..0> 0110 Receiver Mode = HDLC/SDLC
4645 **
4646 ** 1000 1110 0000 0110 = 0x8e06
4647 */
4648 RegValue = 0x8e06;
4649
4650 /*--------------------------------------------------
4651 * ignore user options for UnderRun Actions and
4652 * preambles
4653 *--------------------------------------------------*/
4654 }
4655 else
4656 {
4657 /* Channel mode Register (CMR)
4658 *
4659 * <15..14> 00 Tx Sub modes, Underrun Action
4660 * <13> 0 1 = Send Preamble before opening flag
4661 * <12> 0 1 = Consecutive Idles share common 0
4662 * <11..8> 0110 Transmitter mode = HDLC/SDLC
4663 * <7..4> 0000 Rx Sub modes, addr/ctrl field handling
4664 * <3..0> 0110 Receiver mode = HDLC/SDLC
4665 *
4666 * 0000 0110 0000 0110 = 0x0606
4667 */
4668 if (info->params.mode == MGSL_MODE_RAW) {
4669 RegValue = 0x0001; /* Set Receive mode = external sync */
4670
4671 usc_OutReg( info, IOCR, /* Set IOCR DCD is RxSync Detect Input */
4672 (unsigned short)((usc_InReg(info, IOCR) & ~(BIT13|BIT12)) | BIT12));
4673
4674 /*
4675 * TxSubMode:
4676 * CMR <15> 0 Don't send CRC on Tx Underrun
4677 * CMR <14> x undefined
4678 * CMR <13> 0 Send preamble before openning sync
4679 * CMR <12> 0 Send 8-bit syncs, 1=send Syncs per TxLength
4680 *
4681 * TxMode:
4682 * CMR <11-8) 0100 MonoSync
4683 *
4684 * 0x00 0100 xxxx xxxx 04xx
4685 */
4686 RegValue |= 0x0400;
4687 }
4688 else {
4689
4690 RegValue = 0x0606;
4691
4692 if ( info->params.flags & HDLC_FLAG_UNDERRUN_ABORT15 )
4693 RegValue |= BIT14;
4694 else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG )
4695 RegValue |= BIT15;
4696 else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC )
4697 RegValue |= BIT15 | BIT14;
4698 }
4699
4700 if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE )
4701 RegValue |= BIT13;
4702 }
4703
4704 if ( info->params.mode == MGSL_MODE_HDLC &&
4705 (info->params.flags & HDLC_FLAG_SHARE_ZERO) )
4706 RegValue |= BIT12;
4707
4708 if ( info->params.addr_filter != 0xff )
4709 {
4710 /* set up receive address filtering */
4711 usc_OutReg( info, RSR, info->params.addr_filter );
4712 RegValue |= BIT4;
4713 }
4714
4715 usc_OutReg( info, CMR, RegValue );
4716 info->cmr_value = RegValue;
4717
4718 /* Receiver mode Register (RMR)
4719 *
4720 * <15..13> 000 encoding
4721 * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
4722 * <10> 1 1 = Set CRC to all 1s (use for SDLC/HDLC)
4723 * <9> 0 1 = Include Receive chars in CRC
4724 * <8> 1 1 = Use Abort/PE bit as abort indicator
4725 * <7..6> 00 Even parity
4726 * <5> 0 parity disabled
4727 * <4..2> 000 Receive Char Length = 8 bits
4728 * <1..0> 00 Disable Receiver
4729 *
4730 * 0000 0101 0000 0000 = 0x0500
4731 */
4732
4733 RegValue = 0x0500;
4734
4735 switch ( info->params.encoding ) {
4736 case HDLC_ENCODING_NRZB: RegValue |= BIT13; break;
4737 case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break;
4738 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 | BIT13; break;
4739 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break;
4740 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 | BIT13; break;
4741 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14; break;
4742 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14 | BIT13; break;
4743 }
4744
4745 if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
4746 RegValue |= BIT9;
4747 else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
4748 RegValue |= ( BIT12 | BIT10 | BIT9 );
4749
4750 usc_OutReg( info, RMR, RegValue );
4751
4752 /* Set the Receive count Limit Register (RCLR) to 0xffff. */
4753 /* When an opening flag of an SDLC frame is recognized the */
4754 /* Receive Character count (RCC) is loaded with the value in */
4755 /* RCLR. The RCC is decremented for each received byte. The */
4756 /* value of RCC is stored after the closing flag of the frame */
4757 /* allowing the frame size to be computed. */
4758
4759 usc_OutReg( info, RCLR, RCLRVALUE );
4760
4761 usc_RCmd( info, RCmd_SelectRicrdma_level );
4762
4763 /* Receive Interrupt Control Register (RICR)
4764 *
4765 * <15..8> ? RxFIFO DMA Request Level
4766 * <7> 0 Exited Hunt IA (Interrupt Arm)
4767 * <6> 0 Idle Received IA
4768 * <5> 0 Break/Abort IA
4769 * <4> 0 Rx Bound IA
4770 * <3> 1 Queued status reflects oldest 2 bytes in FIFO
4771 * <2> 0 Abort/PE IA
4772 * <1> 1 Rx Overrun IA
4773 * <0> 0 Select TC0 value for readback
4774 *
4775 * 0000 0000 0000 1000 = 0x000a
4776 */
4777
4778 /* Carry over the Exit Hunt and Idle Received bits */
4779 /* in case they have been armed by usc_ArmEvents. */
4780
4781 RegValue = usc_InReg( info, RICR ) & 0xc0;
4782
4783 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4784 usc_OutReg( info, RICR, (u16)(0x030a | RegValue) );
4785 else
4786 usc_OutReg( info, RICR, (u16)(0x140a | RegValue) );
4787
4788 /* Unlatch all Rx status bits and clear Rx status IRQ Pending */
4789
4790 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
4791 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
4792
4793 /* Transmit mode Register (TMR)
4794 *
4795 * <15..13> 000 encoding
4796 * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
4797 * <10> 1 1 = Start CRC as all 1s (use for SDLC/HDLC)
4798 * <9> 0 1 = Tx CRC Enabled
4799 * <8> 0 1 = Append CRC to end of transmit frame
4800 * <7..6> 00 Transmit parity Even
4801 * <5> 0 Transmit parity Disabled
4802 * <4..2> 000 Tx Char Length = 8 bits
4803 * <1..0> 00 Disable Transmitter
4804 *
4805 * 0000 0100 0000 0000 = 0x0400
4806 */
4807
4808 RegValue = 0x0400;
4809
4810 switch ( info->params.encoding ) {
4811 case HDLC_ENCODING_NRZB: RegValue |= BIT13; break;
4812 case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break;
4813 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 | BIT13; break;
4814 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break;
4815 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 | BIT13; break;
4816 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14; break;
4817 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14 | BIT13; break;
4818 }
4819
4820 if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
4821 RegValue |= BIT9 | BIT8;
4822 else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
4823 RegValue |= ( BIT12 | BIT10 | BIT9 | BIT8);
4824
4825 usc_OutReg( info, TMR, RegValue );
4826
4827 usc_set_txidle( info );
4828
4829
4830 usc_TCmd( info, TCmd_SelectTicrdma_level );
4831
4832 /* Transmit Interrupt Control Register (TICR)
4833 *
4834 * <15..8> ? Transmit FIFO DMA Level
4835 * <7> 0 Present IA (Interrupt Arm)
4836 * <6> 0 Idle Sent IA
4837 * <5> 1 Abort Sent IA
4838 * <4> 1 EOF/EOM Sent IA
4839 * <3> 0 CRC Sent IA
4840 * <2> 1 1 = Wait for SW Trigger to Start Frame
4841 * <1> 1 Tx Underrun IA
4842 * <0> 0 TC0 constant on read back
4843 *
4844 * 0000 0000 0011 0110 = 0x0036
4845 */
4846
4847 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4848 usc_OutReg( info, TICR, 0x0736 );
4849 else
4850 usc_OutReg( info, TICR, 0x1436 );
4851
4852 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
4853 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
4854
4855 /*
4856 ** Transmit Command/Status Register (TCSR)
4857 **
4858 ** <15..12> 0000 TCmd
4859 ** <11> 0/1 UnderWait
4860 ** <10..08> 000 TxIdle
4861 ** <7> x PreSent
4862 ** <6> x IdleSent
4863 ** <5> x AbortSent
4864 ** <4> x EOF/EOM Sent
4865 ** <3> x CRC Sent
4866 ** <2> x All Sent
4867 ** <1> x TxUnder
4868 ** <0> x TxEmpty
4869 **
4870 ** 0000 0000 0000 0000 = 0x0000
4871 */
4872 info->tcsr_value = 0;
4873
4874 if ( !PreSL1660 )
4875 info->tcsr_value |= TCSR_UNDERWAIT;
4876
4877 usc_OutReg( info, TCSR, info->tcsr_value );
4878
4879 /* Clock mode Control Register (CMCR)
4880 *
4881 * <15..14> 00 counter 1 Source = Disabled
4882 * <13..12> 00 counter 0 Source = Disabled
4883 * <11..10> 11 BRG1 Input is TxC Pin
4884 * <9..8> 11 BRG0 Input is TxC Pin
4885 * <7..6> 01 DPLL Input is BRG1 Output
4886 * <5..3> XXX TxCLK comes from Port 0
4887 * <2..0> XXX RxCLK comes from Port 1
4888 *
4889 * 0000 1111 0111 0111 = 0x0f77
4890 */
4891
4892 RegValue = 0x0f40;
4893
4894 if ( info->params.flags & HDLC_FLAG_RXC_DPLL )
4895 RegValue |= 0x0003; /* RxCLK from DPLL */
4896 else if ( info->params.flags & HDLC_FLAG_RXC_BRG )
4897 RegValue |= 0x0004; /* RxCLK from BRG0 */
4898 else if ( info->params.flags & HDLC_FLAG_RXC_TXCPIN)
4899 RegValue |= 0x0006; /* RxCLK from TXC Input */
4900 else
4901 RegValue |= 0x0007; /* RxCLK from Port1 */
4902
4903 if ( info->params.flags & HDLC_FLAG_TXC_DPLL )
4904 RegValue |= 0x0018; /* TxCLK from DPLL */
4905 else if ( info->params.flags & HDLC_FLAG_TXC_BRG )
4906 RegValue |= 0x0020; /* TxCLK from BRG0 */
4907 else if ( info->params.flags & HDLC_FLAG_TXC_RXCPIN)
4908 RegValue |= 0x0038; /* RxCLK from TXC Input */
4909 else
4910 RegValue |= 0x0030; /* TxCLK from Port0 */
4911
4912 usc_OutReg( info, CMCR, RegValue );
4913
4914
4915 /* Hardware Configuration Register (HCR)
4916 *
4917 * <15..14> 00 CTR0 Divisor:00=32,01=16,10=8,11=4
4918 * <13> 0 CTR1DSel:0=CTR0Div determines CTR0Div
4919 * <12> 0 CVOK:0=report code violation in biphase
4920 * <11..10> 00 DPLL Divisor:00=32,01=16,10=8,11=4
4921 * <9..8> XX DPLL mode:00=disable,01=NRZ,10=Biphase,11=Biphase Level
4922 * <7..6> 00 reserved
4923 * <5> 0 BRG1 mode:0=continuous,1=single cycle
4924 * <4> X BRG1 Enable
4925 * <3..2> 00 reserved
4926 * <1> 0 BRG0 mode:0=continuous,1=single cycle
4927 * <0> 0 BRG0 Enable
4928 */
4929
4930 RegValue = 0x0000;
4931
4932 if ( info->params.flags & (HDLC_FLAG_RXC_DPLL | HDLC_FLAG_TXC_DPLL) ) {
4933 u32 XtalSpeed;
4934 u32 DpllDivisor;
4935 u16 Tc;
4936
4937 /* DPLL is enabled. Use BRG1 to provide continuous reference clock */
4938 /* for DPLL. DPLL mode in HCR is dependent on the encoding used. */
4939
4940 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4941 XtalSpeed = 11059200;
4942 else
4943 XtalSpeed = 14745600;
4944
4945 if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
4946 DpllDivisor = 16;
4947 RegValue |= BIT10;
4948 }
4949 else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
4950 DpllDivisor = 8;
4951 RegValue |= BIT11;
4952 }
4953 else
4954 DpllDivisor = 32;
4955
4956 /* Tc = (Xtal/Speed) - 1 */
4957 /* If twice the remainder of (Xtal/Speed) is greater than Speed */
4958 /* then rounding up gives a more precise time constant. Instead */
4959 /* of rounding up and then subtracting 1 we just don't subtract */
4960 /* the one in this case. */
4961
4962 /*--------------------------------------------------
4963 * ejz: for DPLL mode, application should use the
4964 * same clock speed as the partner system, even
4965 * though clocking is derived from the input RxData.
4966 * In case the user uses a 0 for the clock speed,
4967 * default to 0xffffffff and don't try to divide by
4968 * zero
4969 *--------------------------------------------------*/
4970 if ( info->params.clock_speed )
4971 {
4972 Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed);
4973 if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2)
4974 / info->params.clock_speed) )
4975 Tc--;
4976 }
4977 else
4978 Tc = -1;
4979
4980
4981 /* Write 16-bit Time Constant for BRG1 */
4982 usc_OutReg( info, TC1R, Tc );
4983
4984 RegValue |= BIT4; /* enable BRG1 */
4985
4986 switch ( info->params.encoding ) {
4987 case HDLC_ENCODING_NRZ:
4988 case HDLC_ENCODING_NRZB:
4989 case HDLC_ENCODING_NRZI_MARK:
4990 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT8; break;
4991 case HDLC_ENCODING_BIPHASE_MARK:
4992 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT9; break;
4993 case HDLC_ENCODING_BIPHASE_LEVEL:
4994 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT9 | BIT8; break;
4995 }
4996 }
4997
4998 usc_OutReg( info, HCR, RegValue );
4999
5000
5001 /* Channel Control/status Register (CCSR)
5002 *
5003 * <15> X RCC FIFO Overflow status (RO)
5004 * <14> X RCC FIFO Not Empty status (RO)
5005 * <13> 0 1 = Clear RCC FIFO (WO)
5006 * <12> X DPLL Sync (RW)
5007 * <11> X DPLL 2 Missed Clocks status (RO)
5008 * <10> X DPLL 1 Missed Clock status (RO)
5009 * <9..8> 00 DPLL Resync on rising and falling edges (RW)
5010 * <7> X SDLC Loop On status (RO)
5011 * <6> X SDLC Loop Send status (RO)
5012 * <5> 1 Bypass counters for TxClk and RxClk (RW)
5013 * <4..2> 000 Last Char of SDLC frame has 8 bits (RW)
5014 * <1..0> 00 reserved
5015 *
5016 * 0000 0000 0010 0000 = 0x0020
5017 */
5018
5019 usc_OutReg( info, CCSR, 0x1020 );
5020
5021
5022 if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) {
5023 usc_OutReg( info, SICR,
5024 (u16)(usc_InReg(info,SICR) | SICR_CTS_INACTIVE) );
5025 }
5026
5027
5028 /* enable Master Interrupt Enable bit (MIE) */
5029 usc_EnableMasterIrqBit( info );
5030
5031 usc_ClearIrqPendingBits( info, RECEIVE_STATUS | RECEIVE_DATA |
5032 TRANSMIT_STATUS | TRANSMIT_DATA | MISC);
5033
5034 /* arm RCC underflow interrupt */
5035 usc_OutReg(info, SICR, (u16)(usc_InReg(info,SICR) | BIT3));
5036 usc_EnableInterrupts(info, MISC);
5037
5038 info->mbre_bit = 0;
5039 outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */
5040 usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */
5041 info->mbre_bit = BIT8;
5042 outw( BIT8, info->io_base ); /* set Master Bus Enable (DCAR) */
5043
5044 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
5045 /* Enable DMAEN (Port 7, Bit 14) */
5046 /* This connects the DMA request signal to the ISA bus */
5047 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) & ~BIT14));
5048 }
5049
5050 /* DMA Control Register (DCR)
5051 *
5052 * <15..14> 10 Priority mode = Alternating Tx/Rx
5053 * 01 Rx has priority
5054 * 00 Tx has priority
5055 *
5056 * <13> 1 Enable Priority Preempt per DCR<15..14>
5057 * (WARNING DCR<11..10> must be 00 when this is 1)
5058 * 0 Choose activate channel per DCR<11..10>
5059 *
5060 * <12> 0 Little Endian for Array/List
5061 * <11..10> 00 Both Channels can use each bus grant
5062 * <9..6> 0000 reserved
5063 * <5> 0 7 CLK - Minimum Bus Re-request Interval
5064 * <4> 0 1 = drive D/C and S/D pins
5065 * <3> 1 1 = Add one wait state to all DMA cycles.
5066 * <2> 0 1 = Strobe /UAS on every transfer.
5067 * <1..0> 11 Addr incrementing only affects LS24 bits
5068 *
5069 * 0110 0000 0000 1011 = 0x600b
5070 */
5071
5072 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5073 /* PCI adapter does not need DMA wait state */
5074 usc_OutDmaReg( info, DCR, 0xa00b );
5075 }
5076 else
5077 usc_OutDmaReg( info, DCR, 0x800b );
5078
5079
5080 /* Receive DMA mode Register (RDMR)
5081 *
5082 * <15..14> 11 DMA mode = Linked List Buffer mode
5083 * <13> 1 RSBinA/L = store Rx status Block in Arrary/List entry
5084 * <12> 1 Clear count of List Entry after fetching
5085 * <11..10> 00 Address mode = Increment
5086 * <9> 1 Terminate Buffer on RxBound
5087 * <8> 0 Bus Width = 16bits
5088 * <7..0> ? status Bits (write as 0s)
5089 *
5090 * 1111 0010 0000 0000 = 0xf200
5091 */
5092
5093 usc_OutDmaReg( info, RDMR, 0xf200 );
5094
5095
5096 /* Transmit DMA mode Register (TDMR)
5097 *
5098 * <15..14> 11 DMA mode = Linked List Buffer mode
5099 * <13> 1 TCBinA/L = fetch Tx Control Block from List entry
5100 * <12> 1 Clear count of List Entry after fetching
5101 * <11..10> 00 Address mode = Increment
5102 * <9> 1 Terminate Buffer on end of frame
5103 * <8> 0 Bus Width = 16bits
5104 * <7..0> ? status Bits (Read Only so write as 0)
5105 *
5106 * 1111 0010 0000 0000 = 0xf200
5107 */
5108
5109 usc_OutDmaReg( info, TDMR, 0xf200 );
5110
5111
5112 /* DMA Interrupt Control Register (DICR)
5113 *
5114 * <15> 1 DMA Interrupt Enable
5115 * <14> 0 1 = Disable IEO from USC
5116 * <13> 0 1 = Don't provide vector during IntAck
5117 * <12> 1 1 = Include status in Vector
5118 * <10..2> 0 reserved, Must be 0s
5119 * <1> 0 1 = Rx DMA Interrupt Enabled
5120 * <0> 0 1 = Tx DMA Interrupt Enabled
5121 *
5122 * 1001 0000 0000 0000 = 0x9000
5123 */
5124
5125 usc_OutDmaReg( info, DICR, 0x9000 );
5126
5127 usc_InDmaReg( info, RDMR ); /* clear pending receive DMA IRQ bits */
5128 usc_InDmaReg( info, TDMR ); /* clear pending transmit DMA IRQ bits */
5129 usc_OutDmaReg( info, CDIR, 0x0303 ); /* clear IUS and Pending for Tx and Rx */
5130
5131 /* Channel Control Register (CCR)
5132 *
5133 * <15..14> 10 Use 32-bit Tx Control Blocks (TCBs)
5134 * <13> 0 Trigger Tx on SW Command Disabled
5135 * <12> 0 Flag Preamble Disabled
5136 * <11..10> 00 Preamble Length
5137 * <9..8> 00 Preamble Pattern
5138 * <7..6> 10 Use 32-bit Rx status Blocks (RSBs)
5139 * <5> 0 Trigger Rx on SW Command Disabled
5140 * <4..0> 0 reserved
5141 *
5142 * 1000 0000 1000 0000 = 0x8080
5143 */
5144
5145 RegValue = 0x8080;
5146
5147 switch ( info->params.preamble_length ) {
5148 case HDLC_PREAMBLE_LENGTH_16BITS: RegValue |= BIT10; break;
5149 case HDLC_PREAMBLE_LENGTH_32BITS: RegValue |= BIT11; break;
5150 case HDLC_PREAMBLE_LENGTH_64BITS: RegValue |= BIT11 | BIT10; break;
5151 }
5152
5153 switch ( info->params.preamble ) {
5154 case HDLC_PREAMBLE_PATTERN_FLAGS: RegValue |= BIT8 | BIT12; break;
5155 case HDLC_PREAMBLE_PATTERN_ONES: RegValue |= BIT8; break;
5156 case HDLC_PREAMBLE_PATTERN_10: RegValue |= BIT9; break;
5157 case HDLC_PREAMBLE_PATTERN_01: RegValue |= BIT9 | BIT8; break;
5158 }
5159
5160 usc_OutReg( info, CCR, RegValue );
5161
5162
5163 /*
5164 * Burst/Dwell Control Register
5165 *
5166 * <15..8> 0x20 Maximum number of transfers per bus grant
5167 * <7..0> 0x00 Maximum number of clock cycles per bus grant
5168 */
5169
5170 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5171 /* don't limit bus occupancy on PCI adapter */
5172 usc_OutDmaReg( info, BDCR, 0x0000 );
5173 }
5174 else
5175 usc_OutDmaReg( info, BDCR, 0x2000 );
5176
5177 usc_stop_transmitter(info);
5178 usc_stop_receiver(info);
5179
5180 } /* end of usc_set_sdlc_mode() */
5181
5182 /* usc_enable_loopback()
5183 *
5184 * Set the 16C32 for internal loopback mode.
5185 * The TxCLK and RxCLK signals are generated from the BRG0 and
5186 * the TxD is looped back to the RxD internally.
5187 *
5188 * Arguments: info pointer to device instance data
5189 * enable 1 = enable loopback, 0 = disable
5190 * Return Value: None
5191 */
5192 static void usc_enable_loopback(struct mgsl_struct *info, int enable)
5193 {
5194 if (enable) {
5195 /* blank external TXD output */
5196 usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7 | BIT6));
5197
5198 /* Clock mode Control Register (CMCR)
5199 *
5200 * <15..14> 00 counter 1 Disabled
5201 * <13..12> 00 counter 0 Disabled
5202 * <11..10> 11 BRG1 Input is TxC Pin
5203 * <9..8> 11 BRG0 Input is TxC Pin
5204 * <7..6> 01 DPLL Input is BRG1 Output
5205 * <5..3> 100 TxCLK comes from BRG0
5206 * <2..0> 100 RxCLK comes from BRG0
5207 *
5208 * 0000 1111 0110 0100 = 0x0f64
5209 */
5210
5211 usc_OutReg( info, CMCR, 0x0f64 );
5212
5213 /* Write 16-bit Time Constant for BRG0 */
5214 /* use clock speed if available, otherwise use 8 for diagnostics */
5215 if (info->params.clock_speed) {
5216 if (info->bus_type == MGSL_BUS_TYPE_PCI)
5217 usc_OutReg(info, TC0R, (u16)((11059200/info->params.clock_speed)-1));
5218 else
5219 usc_OutReg(info, TC0R, (u16)((14745600/info->params.clock_speed)-1));
5220 } else
5221 usc_OutReg(info, TC0R, (u16)8);
5222
5223 /* Hardware Configuration Register (HCR) Clear Bit 1, BRG0
5224 mode = Continuous Set Bit 0 to enable BRG0. */
5225 usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
5226
5227 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
5228 usc_OutReg(info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004));
5229
5230 /* set Internal Data loopback mode */
5231 info->loopback_bits = 0x300;
5232 outw( 0x0300, info->io_base + CCAR );
5233 } else {
5234 /* enable external TXD output */
5235 usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7 | BIT6));
5236
5237 /* clear Internal Data loopback mode */
5238 info->loopback_bits = 0;
5239 outw( 0,info->io_base + CCAR );
5240 }
5241
5242 } /* end of usc_enable_loopback() */
5243
5244 /* usc_enable_aux_clock()
5245 *
5246 * Enabled the AUX clock output at the specified frequency.
5247 *
5248 * Arguments:
5249 *
5250 * info pointer to device extension
5251 * data_rate data rate of clock in bits per second
5252 * A data rate of 0 disables the AUX clock.
5253 *
5254 * Return Value: None
5255 */
5256 static void usc_enable_aux_clock( struct mgsl_struct *info, u32 data_rate )
5257 {
5258 u32 XtalSpeed;
5259 u16 Tc;
5260
5261 if ( data_rate ) {
5262 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
5263 XtalSpeed = 11059200;
5264 else
5265 XtalSpeed = 14745600;
5266
5267
5268 /* Tc = (Xtal/Speed) - 1 */
5269 /* If twice the remainder of (Xtal/Speed) is greater than Speed */
5270 /* then rounding up gives a more precise time constant. Instead */
5271 /* of rounding up and then subtracting 1 we just don't subtract */
5272 /* the one in this case. */
5273
5274
5275 Tc = (u16)(XtalSpeed/data_rate);
5276 if ( !(((XtalSpeed % data_rate) * 2) / data_rate) )
5277 Tc--;
5278
5279 /* Write 16-bit Time Constant for BRG0 */
5280 usc_OutReg( info, TC0R, Tc );
5281
5282 /*
5283 * Hardware Configuration Register (HCR)
5284 * Clear Bit 1, BRG0 mode = Continuous
5285 * Set Bit 0 to enable BRG0.
5286 */
5287
5288 usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
5289
5290 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
5291 usc_OutReg( info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
5292 } else {
5293 /* data rate == 0 so turn off BRG0 */
5294 usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
5295 }
5296
5297 } /* end of usc_enable_aux_clock() */
5298
5299 /*
5300 *
5301 * usc_process_rxoverrun_sync()
5302 *
5303 * This function processes a receive overrun by resetting the
5304 * receive DMA buffers and issuing a Purge Rx FIFO command
5305 * to allow the receiver to continue receiving.
5306 *
5307 * Arguments:
5308 *
5309 * info pointer to device extension
5310 *
5311 * Return Value: None
5312 */
5313 static void usc_process_rxoverrun_sync( struct mgsl_struct *info )
5314 {
5315 int start_index;
5316 int end_index;
5317 int frame_start_index;
5318 bool start_of_frame_found = false;
5319 bool end_of_frame_found = false;
5320 bool reprogram_dma = false;
5321
5322 DMABUFFERENTRY *buffer_list = info->rx_buffer_list;
5323 u32 phys_addr;
5324
5325 usc_DmaCmd( info, DmaCmd_PauseRxChannel );
5326 usc_RCmd( info, RCmd_EnterHuntmode );
5327 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5328
5329 /* CurrentRxBuffer points to the 1st buffer of the next */
5330 /* possibly available receive frame. */
5331
5332 frame_start_index = start_index = end_index = info->current_rx_buffer;
5333
5334 /* Search for an unfinished string of buffers. This means */
5335 /* that a receive frame started (at least one buffer with */
5336 /* count set to zero) but there is no terminiting buffer */
5337 /* (status set to non-zero). */
5338
5339 while( !buffer_list[end_index].count )
5340 {
5341 /* Count field has been reset to zero by 16C32. */
5342 /* This buffer is currently in use. */
5343
5344 if ( !start_of_frame_found )
5345 {
5346 start_of_frame_found = true;
5347 frame_start_index = end_index;
5348 end_of_frame_found = false;
5349 }
5350
5351 if ( buffer_list[end_index].status )
5352 {
5353 /* Status field has been set by 16C32. */
5354 /* This is the last buffer of a received frame. */
5355
5356 /* We want to leave the buffers for this frame intact. */
5357 /* Move on to next possible frame. */
5358
5359 start_of_frame_found = false;
5360 end_of_frame_found = true;
5361 }
5362
5363 /* advance to next buffer entry in linked list */
5364 end_index++;
5365 if ( end_index == info->rx_buffer_count )
5366 end_index = 0;
5367
5368 if ( start_index == end_index )
5369 {
5370 /* The entire list has been searched with all Counts == 0 and */
5371 /* all Status == 0. The receive buffers are */
5372 /* completely screwed, reset all receive buffers! */
5373 mgsl_reset_rx_dma_buffers( info );
5374 frame_start_index = 0;
5375 start_of_frame_found = false;
5376 reprogram_dma = true;
5377 break;
5378 }
5379 }
5380
5381 if ( start_of_frame_found && !end_of_frame_found )
5382 {
5383 /* There is an unfinished string of receive DMA buffers */
5384 /* as a result of the receiver overrun. */
5385
5386 /* Reset the buffers for the unfinished frame */
5387 /* and reprogram the receive DMA controller to start */
5388 /* at the 1st buffer of unfinished frame. */
5389
5390 start_index = frame_start_index;
5391
5392 do
5393 {
5394 *((unsigned long *)&(info->rx_buffer_list[start_index++].count)) = DMABUFFERSIZE;
5395
5396 /* Adjust index for wrap around. */
5397 if ( start_index == info->rx_buffer_count )
5398 start_index = 0;
5399
5400 } while( start_index != end_index );
5401
5402 reprogram_dma = true;
5403 }
5404
5405 if ( reprogram_dma )
5406 {
5407 usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
5408 usc_ClearIrqPendingBits(info, RECEIVE_DATA|RECEIVE_STATUS);
5409 usc_UnlatchRxstatusBits(info, RECEIVE_DATA|RECEIVE_STATUS);
5410
5411 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
5412
5413 /* This empties the receive FIFO and loads the RCC with RCLR */
5414 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5415
5416 /* program 16C32 with physical address of 1st DMA buffer entry */
5417 phys_addr = info->rx_buffer_list[frame_start_index].phys_entry;
5418 usc_OutDmaReg( info, NRARL, (u16)phys_addr );
5419 usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
5420
5421 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5422 usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS );
5423 usc_EnableInterrupts( info, RECEIVE_STATUS );
5424
5425 /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
5426 /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
5427
5428 usc_OutDmaReg( info, RDIAR, BIT3 | BIT2 );
5429 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
5430 usc_DmaCmd( info, DmaCmd_InitRxChannel );
5431 if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
5432 usc_EnableReceiver(info,ENABLE_AUTO_DCD);
5433 else
5434 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5435 }
5436 else
5437 {
5438 /* This empties the receive FIFO and loads the RCC with RCLR */
5439 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5440 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5441 }
5442
5443 } /* end of usc_process_rxoverrun_sync() */
5444
5445 /* usc_stop_receiver()
5446 *
5447 * Disable USC receiver
5448 *
5449 * Arguments: info pointer to device instance data
5450 * Return Value: None
5451 */
5452 static void usc_stop_receiver( struct mgsl_struct *info )
5453 {
5454 if (debug_level >= DEBUG_LEVEL_ISR)
5455 printk("%s(%d):usc_stop_receiver(%s)\n",
5456 __FILE__,__LINE__, info->device_name );
5457
5458 /* Disable receive DMA channel. */
5459 /* This also disables receive DMA channel interrupts */
5460 usc_DmaCmd( info, DmaCmd_ResetRxChannel );
5461
5462 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5463 usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS );
5464 usc_DisableInterrupts( info, RECEIVE_DATA | RECEIVE_STATUS );
5465
5466 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
5467
5468 /* This empties the receive FIFO and loads the RCC with RCLR */
5469 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5470 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5471
5472 info->rx_enabled = false;
5473 info->rx_overflow = false;
5474 info->rx_rcc_underrun = false;
5475
5476 } /* end of stop_receiver() */
5477
5478 /* usc_start_receiver()
5479 *
5480 * Enable the USC receiver
5481 *
5482 * Arguments: info pointer to device instance data
5483 * Return Value: None
5484 */
5485 static void usc_start_receiver( struct mgsl_struct *info )
5486 {
5487 u32 phys_addr;
5488
5489 if (debug_level >= DEBUG_LEVEL_ISR)
5490 printk("%s(%d):usc_start_receiver(%s)\n",
5491 __FILE__,__LINE__, info->device_name );
5492
5493 mgsl_reset_rx_dma_buffers( info );
5494 usc_stop_receiver( info );
5495
5496 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5497 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5498
5499 if ( info->params.mode == MGSL_MODE_HDLC ||
5500 info->params.mode == MGSL_MODE_RAW ) {
5501 /* DMA mode Transfers */
5502 /* Program the DMA controller. */
5503 /* Enable the DMA controller end of buffer interrupt. */
5504
5505 /* program 16C32 with physical address of 1st DMA buffer entry */
5506 phys_addr = info->rx_buffer_list[0].phys_entry;
5507 usc_OutDmaReg( info, NRARL, (u16)phys_addr );
5508 usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
5509
5510 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5511 usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS );
5512 usc_EnableInterrupts( info, RECEIVE_STATUS );
5513
5514 /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
5515 /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
5516
5517 usc_OutDmaReg( info, RDIAR, BIT3 | BIT2 );
5518 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
5519 usc_DmaCmd( info, DmaCmd_InitRxChannel );
5520 if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
5521 usc_EnableReceiver(info,ENABLE_AUTO_DCD);
5522 else
5523 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5524 } else {
5525 usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
5526 usc_ClearIrqPendingBits(info, RECEIVE_DATA | RECEIVE_STATUS);
5527 usc_EnableInterrupts(info, RECEIVE_DATA);
5528
5529 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5530 usc_RCmd( info, RCmd_EnterHuntmode );
5531
5532 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5533 }
5534
5535 usc_OutReg( info, CCSR, 0x1020 );
5536
5537 info->rx_enabled = true;
5538
5539 } /* end of usc_start_receiver() */
5540
5541 /* usc_start_transmitter()
5542 *
5543 * Enable the USC transmitter and send a transmit frame if
5544 * one is loaded in the DMA buffers.
5545 *
5546 * Arguments: info pointer to device instance data
5547 * Return Value: None
5548 */
5549 static void usc_start_transmitter( struct mgsl_struct *info )
5550 {
5551 u32 phys_addr;
5552 unsigned int FrameSize;
5553
5554 if (debug_level >= DEBUG_LEVEL_ISR)
5555 printk("%s(%d):usc_start_transmitter(%s)\n",
5556 __FILE__,__LINE__, info->device_name );
5557
5558 if ( info->xmit_cnt ) {
5559
5560 /* If auto RTS enabled and RTS is inactive, then assert */
5561 /* RTS and set a flag indicating that the driver should */
5562 /* negate RTS when the transmission completes. */
5563
5564 info->drop_rts_on_tx_done = false;
5565
5566 if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
5567 usc_get_serial_signals( info );
5568 if ( !(info->serial_signals & SerialSignal_RTS) ) {
5569 info->serial_signals |= SerialSignal_RTS;
5570 usc_set_serial_signals( info );
5571 info->drop_rts_on_tx_done = true;
5572 }
5573 }
5574
5575
5576 if ( info->params.mode == MGSL_MODE_ASYNC ) {
5577 if ( !info->tx_active ) {
5578 usc_UnlatchTxstatusBits(info, TXSTATUS_ALL);
5579 usc_ClearIrqPendingBits(info, TRANSMIT_STATUS + TRANSMIT_DATA);
5580 usc_EnableInterrupts(info, TRANSMIT_DATA);
5581 usc_load_txfifo(info);
5582 }
5583 } else {
5584 /* Disable transmit DMA controller while programming. */
5585 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
5586
5587 /* Transmit DMA buffer is loaded, so program USC */
5588 /* to send the frame contained in the buffers. */
5589
5590 FrameSize = info->tx_buffer_list[info->start_tx_dma_buffer].rcc;
5591
5592 /* if operating in Raw sync mode, reset the rcc component
5593 * of the tx dma buffer entry, otherwise, the serial controller
5594 * will send a closing sync char after this count.
5595 */
5596 if ( info->params.mode == MGSL_MODE_RAW )
5597 info->tx_buffer_list[info->start_tx_dma_buffer].rcc = 0;
5598
5599 /* Program the Transmit Character Length Register (TCLR) */
5600 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
5601 usc_OutReg( info, TCLR, (u16)FrameSize );
5602
5603 usc_RTCmd( info, RTCmd_PurgeTxFifo );
5604
5605 /* Program the address of the 1st DMA Buffer Entry in linked list */
5606 phys_addr = info->tx_buffer_list[info->start_tx_dma_buffer].phys_entry;
5607 usc_OutDmaReg( info, NTARL, (u16)phys_addr );
5608 usc_OutDmaReg( info, NTARU, (u16)(phys_addr >> 16) );
5609
5610 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
5611 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
5612 usc_EnableInterrupts( info, TRANSMIT_STATUS );
5613
5614 if ( info->params.mode == MGSL_MODE_RAW &&
5615 info->num_tx_dma_buffers > 1 ) {
5616 /* When running external sync mode, attempt to 'stream' transmit */
5617 /* by filling tx dma buffers as they become available. To do this */
5618 /* we need to enable Tx DMA EOB Status interrupts : */
5619 /* */
5620 /* 1. Arm End of Buffer (EOB) Transmit DMA Interrupt (BIT2 of TDIAR) */
5621 /* 2. Enable Transmit DMA Interrupts (BIT0 of DICR) */
5622
5623 usc_OutDmaReg( info, TDIAR, BIT2|BIT3 );
5624 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT0) );
5625 }
5626
5627 /* Initialize Transmit DMA Channel */
5628 usc_DmaCmd( info, DmaCmd_InitTxChannel );
5629
5630 usc_TCmd( info, TCmd_SendFrame );
5631
5632 mod_timer(&info->tx_timer, jiffies +
5633 msecs_to_jiffies(5000));
5634 }
5635 info->tx_active = true;
5636 }
5637
5638 if ( !info->tx_enabled ) {
5639 info->tx_enabled = true;
5640 if ( info->params.flags & HDLC_FLAG_AUTO_CTS )
5641 usc_EnableTransmitter(info,ENABLE_AUTO_CTS);
5642 else
5643 usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
5644 }
5645
5646 } /* end of usc_start_transmitter() */
5647
5648 /* usc_stop_transmitter()
5649 *
5650 * Stops the transmitter and DMA
5651 *
5652 * Arguments: info pointer to device isntance data
5653 * Return Value: None
5654 */
5655 static void usc_stop_transmitter( struct mgsl_struct *info )
5656 {
5657 if (debug_level >= DEBUG_LEVEL_ISR)
5658 printk("%s(%d):usc_stop_transmitter(%s)\n",
5659 __FILE__,__LINE__, info->device_name );
5660
5661 del_timer(&info->tx_timer);
5662
5663 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
5664 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA );
5665 usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA );
5666
5667 usc_EnableTransmitter(info,DISABLE_UNCONDITIONAL);
5668 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
5669 usc_RTCmd( info, RTCmd_PurgeTxFifo );
5670
5671 info->tx_enabled = false;
5672 info->tx_active = false;
5673
5674 } /* end of usc_stop_transmitter() */
5675
5676 /* usc_load_txfifo()
5677 *
5678 * Fill the transmit FIFO until the FIFO is full or
5679 * there is no more data to load.
5680 *
5681 * Arguments: info pointer to device extension (instance data)
5682 * Return Value: None
5683 */
5684 static void usc_load_txfifo( struct mgsl_struct *info )
5685 {
5686 int Fifocount;
5687 u8 TwoBytes[2];
5688
5689 if ( !info->xmit_cnt && !info->x_char )
5690 return;
5691
5692 /* Select transmit FIFO status readback in TICR */
5693 usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
5694
5695 /* load the Transmit FIFO until FIFOs full or all data sent */
5696
5697 while( (Fifocount = usc_InReg(info, TICR) >> 8) && info->xmit_cnt ) {
5698 /* there is more space in the transmit FIFO and */
5699 /* there is more data in transmit buffer */
5700
5701 if ( (info->xmit_cnt > 1) && (Fifocount > 1) && !info->x_char ) {
5702 /* write a 16-bit word from transmit buffer to 16C32 */
5703
5704 TwoBytes[0] = info->xmit_buf[info->xmit_tail++];
5705 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5706 TwoBytes[1] = info->xmit_buf[info->xmit_tail++];
5707 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5708
5709 outw( *((u16 *)TwoBytes), info->io_base + DATAREG);
5710
5711 info->xmit_cnt -= 2;
5712 info->icount.tx += 2;
5713 } else {
5714 /* only 1 byte left to transmit or 1 FIFO slot left */
5715
5716 outw( (inw( info->io_base + CCAR) & 0x0780) | (TDR+LSBONLY),
5717 info->io_base + CCAR );
5718
5719 if (info->x_char) {
5720 /* transmit pending high priority char */
5721 outw( info->x_char,info->io_base + CCAR );
5722 info->x_char = 0;
5723 } else {
5724 outw( info->xmit_buf[info->xmit_tail++],info->io_base + CCAR );
5725 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5726 info->xmit_cnt--;
5727 }
5728 info->icount.tx++;
5729 }
5730 }
5731
5732 } /* end of usc_load_txfifo() */
5733
5734 /* usc_reset()
5735 *
5736 * Reset the adapter to a known state and prepare it for further use.
5737 *
5738 * Arguments: info pointer to device instance data
5739 * Return Value: None
5740 */
5741 static void usc_reset( struct mgsl_struct *info )
5742 {
5743 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5744 int i;
5745 u32 readval;
5746
5747 /* Set BIT30 of Misc Control Register */
5748 /* (Local Control Register 0x50) to force reset of USC. */
5749
5750 volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5751 u32 *LCR0BRDR = (u32 *)(info->lcr_base + 0x28);
5752
5753 info->misc_ctrl_value |= BIT30;
5754 *MiscCtrl = info->misc_ctrl_value;
5755
5756 /*
5757 * Force at least 170ns delay before clearing
5758 * reset bit. Each read from LCR takes at least
5759 * 30ns so 10 times for 300ns to be safe.
5760 */
5761 for(i=0;i<10;i++)
5762 readval = *MiscCtrl;
5763
5764 info->misc_ctrl_value &= ~BIT30;
5765 *MiscCtrl = info->misc_ctrl_value;
5766
5767 *LCR0BRDR = BUS_DESCRIPTOR(
5768 1, // Write Strobe Hold (0-3)
5769 2, // Write Strobe Delay (0-3)
5770 2, // Read Strobe Delay (0-3)
5771 0, // NWDD (Write data-data) (0-3)
5772 4, // NWAD (Write Addr-data) (0-31)
5773 0, // NXDA (Read/Write Data-Addr) (0-3)
5774 0, // NRDD (Read Data-Data) (0-3)
5775 5 // NRAD (Read Addr-Data) (0-31)
5776 );
5777 } else {
5778 /* do HW reset */
5779 outb( 0,info->io_base + 8 );
5780 }
5781
5782 info->mbre_bit = 0;
5783 info->loopback_bits = 0;
5784 info->usc_idle_mode = 0;
5785
5786 /*
5787 * Program the Bus Configuration Register (BCR)
5788 *
5789 * <15> 0 Don't use separate address
5790 * <14..6> 0 reserved
5791 * <5..4> 00 IAckmode = Default, don't care
5792 * <3> 1 Bus Request Totem Pole output
5793 * <2> 1 Use 16 Bit data bus
5794 * <1> 0 IRQ Totem Pole output
5795 * <0> 0 Don't Shift Right Addr
5796 *
5797 * 0000 0000 0000 1100 = 0x000c
5798 *
5799 * By writing to io_base + SDPIN the Wait/Ack pin is
5800 * programmed to work as a Wait pin.
5801 */
5802
5803 outw( 0x000c,info->io_base + SDPIN );
5804
5805
5806 outw( 0,info->io_base );
5807 outw( 0,info->io_base + CCAR );
5808
5809 /* select little endian byte ordering */
5810 usc_RTCmd( info, RTCmd_SelectLittleEndian );
5811
5812
5813 /* Port Control Register (PCR)
5814 *
5815 * <15..14> 11 Port 7 is Output (~DMAEN, Bit 14 : 0 = Enabled)
5816 * <13..12> 11 Port 6 is Output (~INTEN, Bit 12 : 0 = Enabled)
5817 * <11..10> 00 Port 5 is Input (No Connect, Don't Care)
5818 * <9..8> 00 Port 4 is Input (No Connect, Don't Care)
5819 * <7..6> 11 Port 3 is Output (~RTS, Bit 6 : 0 = Enabled )
5820 * <5..4> 11 Port 2 is Output (~DTR, Bit 4 : 0 = Enabled )
5821 * <3..2> 01 Port 1 is Input (Dedicated RxC)
5822 * <1..0> 01 Port 0 is Input (Dedicated TxC)
5823 *
5824 * 1111 0000 1111 0101 = 0xf0f5
5825 */
5826
5827 usc_OutReg( info, PCR, 0xf0f5 );
5828
5829
5830 /*
5831 * Input/Output Control Register
5832 *
5833 * <15..14> 00 CTS is active low input
5834 * <13..12> 00 DCD is active low input
5835 * <11..10> 00 TxREQ pin is input (DSR)
5836 * <9..8> 00 RxREQ pin is input (RI)
5837 * <7..6> 00 TxD is output (Transmit Data)
5838 * <5..3> 000 TxC Pin in Input (14.7456MHz Clock)
5839 * <2..0> 100 RxC is Output (drive with BRG0)
5840 *
5841 * 0000 0000 0000 0100 = 0x0004
5842 */
5843
5844 usc_OutReg( info, IOCR, 0x0004 );
5845
5846 } /* end of usc_reset() */
5847
5848 /* usc_set_async_mode()
5849 *
5850 * Program adapter for asynchronous communications.
5851 *
5852 * Arguments: info pointer to device instance data
5853 * Return Value: None
5854 */
5855 static void usc_set_async_mode( struct mgsl_struct *info )
5856 {
5857 u16 RegValue;
5858
5859 /* disable interrupts while programming USC */
5860 usc_DisableMasterIrqBit( info );
5861
5862 outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */
5863 usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */
5864
5865 usc_loopback_frame( info );
5866
5867 /* Channel mode Register (CMR)
5868 *
5869 * <15..14> 00 Tx Sub modes, 00 = 1 Stop Bit
5870 * <13..12> 00 00 = 16X Clock
5871 * <11..8> 0000 Transmitter mode = Asynchronous
5872 * <7..6> 00 reserved?
5873 * <5..4> 00 Rx Sub modes, 00 = 16X Clock
5874 * <3..0> 0000 Receiver mode = Asynchronous
5875 *
5876 * 0000 0000 0000 0000 = 0x0
5877 */
5878
5879 RegValue = 0;
5880 if ( info->params.stop_bits != 1 )
5881 RegValue |= BIT14;
5882 usc_OutReg( info, CMR, RegValue );
5883
5884
5885 /* Receiver mode Register (RMR)
5886 *
5887 * <15..13> 000 encoding = None
5888 * <12..08> 00000 reserved (Sync Only)
5889 * <7..6> 00 Even parity
5890 * <5> 0 parity disabled
5891 * <4..2> 000 Receive Char Length = 8 bits
5892 * <1..0> 00 Disable Receiver
5893 *
5894 * 0000 0000 0000 0000 = 0x0
5895 */
5896
5897 RegValue = 0;
5898
5899 if ( info->params.data_bits != 8 )
5900 RegValue |= BIT4 | BIT3 | BIT2;
5901
5902 if ( info->params.parity != ASYNC_PARITY_NONE ) {
5903 RegValue |= BIT5;
5904 if ( info->params.parity != ASYNC_PARITY_ODD )
5905 RegValue |= BIT6;
5906 }
5907
5908 usc_OutReg( info, RMR, RegValue );
5909
5910
5911 /* Set IRQ trigger level */
5912
5913 usc_RCmd( info, RCmd_SelectRicrIntLevel );
5914
5915
5916 /* Receive Interrupt Control Register (RICR)
5917 *
5918 * <15..8> ? RxFIFO IRQ Request Level
5919 *
5920 * Note: For async mode the receive FIFO level must be set
5921 * to 0 to avoid the situation where the FIFO contains fewer bytes
5922 * than the trigger level and no more data is expected.
5923 *
5924 * <7> 0 Exited Hunt IA (Interrupt Arm)
5925 * <6> 0 Idle Received IA
5926 * <5> 0 Break/Abort IA
5927 * <4> 0 Rx Bound IA
5928 * <3> 0 Queued status reflects oldest byte in FIFO
5929 * <2> 0 Abort/PE IA
5930 * <1> 0 Rx Overrun IA
5931 * <0> 0 Select TC0 value for readback
5932 *
5933 * 0000 0000 0100 0000 = 0x0000 + (FIFOLEVEL in MSB)
5934 */
5935
5936 usc_OutReg( info, RICR, 0x0000 );
5937
5938 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5939 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
5940
5941
5942 /* Transmit mode Register (TMR)
5943 *
5944 * <15..13> 000 encoding = None
5945 * <12..08> 00000 reserved (Sync Only)
5946 * <7..6> 00 Transmit parity Even
5947 * <5> 0 Transmit parity Disabled
5948 * <4..2> 000 Tx Char Length = 8 bits
5949 * <1..0> 00 Disable Transmitter
5950 *
5951 * 0000 0000 0000 0000 = 0x0
5952 */
5953
5954 RegValue = 0;
5955
5956 if ( info->params.data_bits != 8 )
5957 RegValue |= BIT4 | BIT3 | BIT2;
5958
5959 if ( info->params.parity != ASYNC_PARITY_NONE ) {
5960 RegValue |= BIT5;
5961 if ( info->params.parity != ASYNC_PARITY_ODD )
5962 RegValue |= BIT6;
5963 }
5964
5965 usc_OutReg( info, TMR, RegValue );
5966
5967 usc_set_txidle( info );
5968
5969
5970 /* Set IRQ trigger level */
5971
5972 usc_TCmd( info, TCmd_SelectTicrIntLevel );
5973
5974
5975 /* Transmit Interrupt Control Register (TICR)
5976 *
5977 * <15..8> ? Transmit FIFO IRQ Level
5978 * <7> 0 Present IA (Interrupt Arm)
5979 * <6> 1 Idle Sent IA
5980 * <5> 0 Abort Sent IA
5981 * <4> 0 EOF/EOM Sent IA
5982 * <3> 0 CRC Sent IA
5983 * <2> 0 1 = Wait for SW Trigger to Start Frame
5984 * <1> 0 Tx Underrun IA
5985 * <0> 0 TC0 constant on read back
5986 *
5987 * 0000 0000 0100 0000 = 0x0040
5988 */
5989
5990 usc_OutReg( info, TICR, 0x1f40 );
5991
5992 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
5993 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
5994
5995 usc_enable_async_clock( info, info->params.data_rate );
5996
5997
5998 /* Channel Control/status Register (CCSR)
5999 *
6000 * <15> X RCC FIFO Overflow status (RO)
6001 * <14> X RCC FIFO Not Empty status (RO)
6002 * <13> 0 1 = Clear RCC FIFO (WO)
6003 * <12> X DPLL in Sync status (RO)
6004 * <11> X DPLL 2 Missed Clocks status (RO)
6005 * <10> X DPLL 1 Missed Clock status (RO)
6006 * <9..8> 00 DPLL Resync on rising and falling edges (RW)
6007 * <7> X SDLC Loop On status (RO)
6008 * <6> X SDLC Loop Send status (RO)
6009 * <5> 1 Bypass counters for TxClk and RxClk (RW)
6010 * <4..2> 000 Last Char of SDLC frame has 8 bits (RW)
6011 * <1..0> 00 reserved
6012 *
6013 * 0000 0000 0010 0000 = 0x0020
6014 */
6015
6016 usc_OutReg( info, CCSR, 0x0020 );
6017
6018 usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA +
6019 RECEIVE_DATA + RECEIVE_STATUS );
6020
6021 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA +
6022 RECEIVE_DATA + RECEIVE_STATUS );
6023
6024 usc_EnableMasterIrqBit( info );
6025
6026 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
6027 /* Enable INTEN (Port 6, Bit12) */
6028 /* This connects the IRQ request signal to the ISA bus */
6029 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
6030 }
6031
6032 if (info->params.loopback) {
6033 info->loopback_bits = 0x300;
6034 outw(0x0300, info->io_base + CCAR);
6035 }
6036
6037 } /* end of usc_set_async_mode() */
6038
6039 /* usc_loopback_frame()
6040 *
6041 * Loop back a small (2 byte) dummy SDLC frame.
6042 * Interrupts and DMA are NOT used. The purpose of this is to
6043 * clear any 'stale' status info left over from running in async mode.
6044 *
6045 * The 16C32 shows the strange behaviour of marking the 1st
6046 * received SDLC frame with a CRC error even when there is no
6047 * CRC error. To get around this a small dummy from of 2 bytes
6048 * is looped back when switching from async to sync mode.
6049 *
6050 * Arguments: info pointer to device instance data
6051 * Return Value: None
6052 */
6053 static void usc_loopback_frame( struct mgsl_struct *info )
6054 {
6055 int i;
6056 unsigned long oldmode = info->params.mode;
6057
6058 info->params.mode = MGSL_MODE_HDLC;
6059
6060 usc_DisableMasterIrqBit( info );
6061
6062 usc_set_sdlc_mode( info );
6063 usc_enable_loopback( info, 1 );
6064
6065 /* Write 16-bit Time Constant for BRG0 */
6066 usc_OutReg( info, TC0R, 0 );
6067
6068 /* Channel Control Register (CCR)
6069 *
6070 * <15..14> 00 Don't use 32-bit Tx Control Blocks (TCBs)
6071 * <13> 0 Trigger Tx on SW Command Disabled
6072 * <12> 0 Flag Preamble Disabled
6073 * <11..10> 00 Preamble Length = 8-Bits
6074 * <9..8> 01 Preamble Pattern = flags
6075 * <7..6> 10 Don't use 32-bit Rx status Blocks (RSBs)
6076 * <5> 0 Trigger Rx on SW Command Disabled
6077 * <4..0> 0 reserved
6078 *
6079 * 0000 0001 0000 0000 = 0x0100
6080 */
6081
6082 usc_OutReg( info, CCR, 0x0100 );
6083
6084 /* SETUP RECEIVER */
6085 usc_RTCmd( info, RTCmd_PurgeRxFifo );
6086 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
6087
6088 /* SETUP TRANSMITTER */
6089 /* Program the Transmit Character Length Register (TCLR) */
6090 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
6091 usc_OutReg( info, TCLR, 2 );
6092 usc_RTCmd( info, RTCmd_PurgeTxFifo );
6093
6094 /* unlatch Tx status bits, and start transmit channel. */
6095 usc_UnlatchTxstatusBits(info,TXSTATUS_ALL);
6096 outw(0,info->io_base + DATAREG);
6097
6098 /* ENABLE TRANSMITTER */
6099 usc_TCmd( info, TCmd_SendFrame );
6100 usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
6101
6102 /* WAIT FOR RECEIVE COMPLETE */
6103 for (i=0 ; i<1000 ; i++)
6104 if (usc_InReg( info, RCSR ) & (BIT8 | BIT4 | BIT3 | BIT1))
6105 break;
6106
6107 /* clear Internal Data loopback mode */
6108 usc_enable_loopback(info, 0);
6109
6110 usc_EnableMasterIrqBit(info);
6111
6112 info->params.mode = oldmode;
6113
6114 } /* end of usc_loopback_frame() */
6115
6116 /* usc_set_sync_mode() Programs the USC for SDLC communications.
6117 *
6118 * Arguments: info pointer to adapter info structure
6119 * Return Value: None
6120 */
6121 static void usc_set_sync_mode( struct mgsl_struct *info )
6122 {
6123 usc_loopback_frame( info );
6124 usc_set_sdlc_mode( info );
6125
6126 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
6127 /* Enable INTEN (Port 6, Bit12) */
6128 /* This connects the IRQ request signal to the ISA bus */
6129 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
6130 }
6131
6132 usc_enable_aux_clock(info, info->params.clock_speed);
6133
6134 if (info->params.loopback)
6135 usc_enable_loopback(info,1);
6136
6137 } /* end of mgsl_set_sync_mode() */
6138
6139 /* usc_set_txidle() Set the HDLC idle mode for the transmitter.
6140 *
6141 * Arguments: info pointer to device instance data
6142 * Return Value: None
6143 */
6144 static void usc_set_txidle( struct mgsl_struct *info )
6145 {
6146 u16 usc_idle_mode = IDLEMODE_FLAGS;
6147
6148 /* Map API idle mode to USC register bits */
6149
6150 switch( info->idle_mode ){
6151 case HDLC_TXIDLE_FLAGS: usc_idle_mode = IDLEMODE_FLAGS; break;
6152 case HDLC_TXIDLE_ALT_ZEROS_ONES: usc_idle_mode = IDLEMODE_ALT_ONE_ZERO; break;
6153 case HDLC_TXIDLE_ZEROS: usc_idle_mode = IDLEMODE_ZERO; break;
6154 case HDLC_TXIDLE_ONES: usc_idle_mode = IDLEMODE_ONE; break;
6155 case HDLC_TXIDLE_ALT_MARK_SPACE: usc_idle_mode = IDLEMODE_ALT_MARK_SPACE; break;
6156 case HDLC_TXIDLE_SPACE: usc_idle_mode = IDLEMODE_SPACE; break;
6157 case HDLC_TXIDLE_MARK: usc_idle_mode = IDLEMODE_MARK; break;
6158 }
6159
6160 info->usc_idle_mode = usc_idle_mode;
6161 //usc_OutReg(info, TCSR, usc_idle_mode);
6162 info->tcsr_value &= ~IDLEMODE_MASK; /* clear idle mode bits */
6163 info->tcsr_value += usc_idle_mode;
6164 usc_OutReg(info, TCSR, info->tcsr_value);
6165
6166 /*
6167 * if SyncLink WAN adapter is running in external sync mode, the
6168 * transmitter has been set to Monosync in order to try to mimic
6169 * a true raw outbound bit stream. Monosync still sends an open/close
6170 * sync char at the start/end of a frame. Try to match those sync
6171 * patterns to the idle mode set here
6172 */
6173 if ( info->params.mode == MGSL_MODE_RAW ) {
6174 unsigned char syncpat = 0;
6175 switch( info->idle_mode ) {
6176 case HDLC_TXIDLE_FLAGS:
6177 syncpat = 0x7e;
6178 break;
6179 case HDLC_TXIDLE_ALT_ZEROS_ONES:
6180 syncpat = 0x55;
6181 break;
6182 case HDLC_TXIDLE_ZEROS:
6183 case HDLC_TXIDLE_SPACE:
6184 syncpat = 0x00;
6185 break;
6186 case HDLC_TXIDLE_ONES:
6187 case HDLC_TXIDLE_MARK:
6188 syncpat = 0xff;
6189 break;
6190 case HDLC_TXIDLE_ALT_MARK_SPACE:
6191 syncpat = 0xaa;
6192 break;
6193 }
6194
6195 usc_SetTransmitSyncChars(info,syncpat,syncpat);
6196 }
6197
6198 } /* end of usc_set_txidle() */
6199
6200 /* usc_get_serial_signals()
6201 *
6202 * Query the adapter for the state of the V24 status (input) signals.
6203 *
6204 * Arguments: info pointer to device instance data
6205 * Return Value: None
6206 */
6207 static void usc_get_serial_signals( struct mgsl_struct *info )
6208 {
6209 u16 status;
6210
6211 /* clear all serial signals except RTS and DTR */
6212 info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
6213
6214 /* Read the Misc Interrupt status Register (MISR) to get */
6215 /* the V24 status signals. */
6216
6217 status = usc_InReg( info, MISR );
6218
6219 /* set serial signal bits to reflect MISR */
6220
6221 if ( status & MISCSTATUS_CTS )
6222 info->serial_signals |= SerialSignal_CTS;
6223
6224 if ( status & MISCSTATUS_DCD )
6225 info->serial_signals |= SerialSignal_DCD;
6226
6227 if ( status & MISCSTATUS_RI )
6228 info->serial_signals |= SerialSignal_RI;
6229
6230 if ( status & MISCSTATUS_DSR )
6231 info->serial_signals |= SerialSignal_DSR;
6232
6233 } /* end of usc_get_serial_signals() */
6234
6235 /* usc_set_serial_signals()
6236 *
6237 * Set the state of RTS and DTR based on contents of
6238 * serial_signals member of device extension.
6239 *
6240 * Arguments: info pointer to device instance data
6241 * Return Value: None
6242 */
6243 static void usc_set_serial_signals( struct mgsl_struct *info )
6244 {
6245 u16 Control;
6246 unsigned char V24Out = info->serial_signals;
6247
6248 /* get the current value of the Port Control Register (PCR) */
6249
6250 Control = usc_InReg( info, PCR );
6251
6252 if ( V24Out & SerialSignal_RTS )
6253 Control &= ~(BIT6);
6254 else
6255 Control |= BIT6;
6256
6257 if ( V24Out & SerialSignal_DTR )
6258 Control &= ~(BIT4);
6259 else
6260 Control |= BIT4;
6261
6262 usc_OutReg( info, PCR, Control );
6263
6264 } /* end of usc_set_serial_signals() */
6265
6266 /* usc_enable_async_clock()
6267 *
6268 * Enable the async clock at the specified frequency.
6269 *
6270 * Arguments: info pointer to device instance data
6271 * data_rate data rate of clock in bps
6272 * 0 disables the AUX clock.
6273 * Return Value: None
6274 */
6275 static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate )
6276 {
6277 if ( data_rate ) {
6278 /*
6279 * Clock mode Control Register (CMCR)
6280 *
6281 * <15..14> 00 counter 1 Disabled
6282 * <13..12> 00 counter 0 Disabled
6283 * <11..10> 11 BRG1 Input is TxC Pin
6284 * <9..8> 11 BRG0 Input is TxC Pin
6285 * <7..6> 01 DPLL Input is BRG1 Output
6286 * <5..3> 100 TxCLK comes from BRG0
6287 * <2..0> 100 RxCLK comes from BRG0
6288 *
6289 * 0000 1111 0110 0100 = 0x0f64
6290 */
6291
6292 usc_OutReg( info, CMCR, 0x0f64 );
6293
6294
6295 /*
6296 * Write 16-bit Time Constant for BRG0
6297 * Time Constant = (ClkSpeed / data_rate) - 1
6298 * ClkSpeed = 921600 (ISA), 691200 (PCI)
6299 */
6300
6301 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
6302 usc_OutReg( info, TC0R, (u16)((691200/data_rate) - 1) );
6303 else
6304 usc_OutReg( info, TC0R, (u16)((921600/data_rate) - 1) );
6305
6306
6307 /*
6308 * Hardware Configuration Register (HCR)
6309 * Clear Bit 1, BRG0 mode = Continuous
6310 * Set Bit 0 to enable BRG0.
6311 */
6312
6313 usc_OutReg( info, HCR,
6314 (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
6315
6316
6317 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
6318
6319 usc_OutReg( info, IOCR,
6320 (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
6321 } else {
6322 /* data rate == 0 so turn off BRG0 */
6323 usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
6324 }
6325
6326 } /* end of usc_enable_async_clock() */
6327
6328 /*
6329 * Buffer Structures:
6330 *
6331 * Normal memory access uses virtual addresses that can make discontiguous
6332 * physical memory pages appear to be contiguous in the virtual address
6333 * space (the processors memory mapping handles the conversions).
6334 *
6335 * DMA transfers require physically contiguous memory. This is because
6336 * the DMA system controller and DMA bus masters deal with memory using
6337 * only physical addresses.
6338 *
6339 * This causes a problem under Windows NT when large DMA buffers are
6340 * needed. Fragmentation of the nonpaged pool prevents allocations of
6341 * physically contiguous buffers larger than the PAGE_SIZE.
6342 *
6343 * However the 16C32 supports Bus Master Scatter/Gather DMA which
6344 * allows DMA transfers to physically discontiguous buffers. Information
6345 * about each data transfer buffer is contained in a memory structure
6346 * called a 'buffer entry'. A list of buffer entries is maintained
6347 * to track and control the use of the data transfer buffers.
6348 *
6349 * To support this strategy we will allocate sufficient PAGE_SIZE
6350 * contiguous memory buffers to allow for the total required buffer
6351 * space.
6352 *
6353 * The 16C32 accesses the list of buffer entries using Bus Master
6354 * DMA. Control information is read from the buffer entries by the
6355 * 16C32 to control data transfers. status information is written to
6356 * the buffer entries by the 16C32 to indicate the status of completed
6357 * transfers.
6358 *
6359 * The CPU writes control information to the buffer entries to control
6360 * the 16C32 and reads status information from the buffer entries to
6361 * determine information about received and transmitted frames.
6362 *
6363 * Because the CPU and 16C32 (adapter) both need simultaneous access
6364 * to the buffer entries, the buffer entry memory is allocated with
6365 * HalAllocateCommonBuffer(). This restricts the size of the buffer
6366 * entry list to PAGE_SIZE.
6367 *
6368 * The actual data buffers on the other hand will only be accessed
6369 * by the CPU or the adapter but not by both simultaneously. This allows
6370 * Scatter/Gather packet based DMA procedures for using physically
6371 * discontiguous pages.
6372 */
6373
6374 /*
6375 * mgsl_reset_tx_dma_buffers()
6376 *
6377 * Set the count for all transmit buffers to 0 to indicate the
6378 * buffer is available for use and set the current buffer to the
6379 * first buffer. This effectively makes all buffers free and
6380 * discards any data in buffers.
6381 *
6382 * Arguments: info pointer to device instance data
6383 * Return Value: None
6384 */
6385 static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info )
6386 {
6387 unsigned int i;
6388
6389 for ( i = 0; i < info->tx_buffer_count; i++ ) {
6390 *((unsigned long *)&(info->tx_buffer_list[i].count)) = 0;
6391 }
6392
6393 info->current_tx_buffer = 0;
6394 info->start_tx_dma_buffer = 0;
6395 info->tx_dma_buffers_used = 0;
6396
6397 info->get_tx_holding_index = 0;
6398 info->put_tx_holding_index = 0;
6399 info->tx_holding_count = 0;
6400
6401 } /* end of mgsl_reset_tx_dma_buffers() */
6402
6403 /*
6404 * num_free_tx_dma_buffers()
6405 *
6406 * returns the number of free tx dma buffers available
6407 *
6408 * Arguments: info pointer to device instance data
6409 * Return Value: number of free tx dma buffers
6410 */
6411 static int num_free_tx_dma_buffers(struct mgsl_struct *info)
6412 {
6413 return info->tx_buffer_count - info->tx_dma_buffers_used;
6414 }
6415
6416 /*
6417 * mgsl_reset_rx_dma_buffers()
6418 *
6419 * Set the count for all receive buffers to DMABUFFERSIZE
6420 * and set the current buffer to the first buffer. This effectively
6421 * makes all buffers free and discards any data in buffers.
6422 *
6423 * Arguments: info pointer to device instance data
6424 * Return Value: None
6425 */
6426 static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info )
6427 {
6428 unsigned int i;
6429
6430 for ( i = 0; i < info->rx_buffer_count; i++ ) {
6431 *((unsigned long *)&(info->rx_buffer_list[i].count)) = DMABUFFERSIZE;
6432 // info->rx_buffer_list[i].count = DMABUFFERSIZE;
6433 // info->rx_buffer_list[i].status = 0;
6434 }
6435
6436 info->current_rx_buffer = 0;
6437
6438 } /* end of mgsl_reset_rx_dma_buffers() */
6439
6440 /*
6441 * mgsl_free_rx_frame_buffers()
6442 *
6443 * Free the receive buffers used by a received SDLC
6444 * frame such that the buffers can be reused.
6445 *
6446 * Arguments:
6447 *
6448 * info pointer to device instance data
6449 * StartIndex index of 1st receive buffer of frame
6450 * EndIndex index of last receive buffer of frame
6451 *
6452 * Return Value: None
6453 */
6454 static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex )
6455 {
6456 bool Done = false;
6457 DMABUFFERENTRY *pBufEntry;
6458 unsigned int Index;
6459
6460 /* Starting with 1st buffer entry of the frame clear the status */
6461 /* field and set the count field to DMA Buffer Size. */
6462
6463 Index = StartIndex;
6464
6465 while( !Done ) {
6466 pBufEntry = &(info->rx_buffer_list[Index]);
6467
6468 if ( Index == EndIndex ) {
6469 /* This is the last buffer of the frame! */
6470 Done = true;
6471 }
6472
6473 /* reset current buffer for reuse */
6474 // pBufEntry->status = 0;
6475 // pBufEntry->count = DMABUFFERSIZE;
6476 *((unsigned long *)&(pBufEntry->count)) = DMABUFFERSIZE;
6477
6478 /* advance to next buffer entry in linked list */
6479 Index++;
6480 if ( Index == info->rx_buffer_count )
6481 Index = 0;
6482 }
6483
6484 /* set current buffer to next buffer after last buffer of frame */
6485 info->current_rx_buffer = Index;
6486
6487 } /* end of free_rx_frame_buffers() */
6488
6489 /* mgsl_get_rx_frame()
6490 *
6491 * This function attempts to return a received SDLC frame from the
6492 * receive DMA buffers. Only frames received without errors are returned.
6493 *
6494 * Arguments: info pointer to device extension
6495 * Return Value: true if frame returned, otherwise false
6496 */
6497 static bool mgsl_get_rx_frame(struct mgsl_struct *info)
6498 {
6499 unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */
6500 unsigned short status;
6501 DMABUFFERENTRY *pBufEntry;
6502 unsigned int framesize = 0;
6503 bool ReturnCode = false;
6504 unsigned long flags;
6505 struct tty_struct *tty = info->port.tty;
6506 bool return_frame = false;
6507
6508 /*
6509 * current_rx_buffer points to the 1st buffer of the next available
6510 * receive frame. To find the last buffer of the frame look for
6511 * a non-zero status field in the buffer entries. (The status
6512 * field is set by the 16C32 after completing a receive frame.
6513 */
6514
6515 StartIndex = EndIndex = info->current_rx_buffer;
6516
6517 while( !info->rx_buffer_list[EndIndex].status ) {
6518 /*
6519 * If the count field of the buffer entry is non-zero then
6520 * this buffer has not been used. (The 16C32 clears the count
6521 * field when it starts using the buffer.) If an unused buffer
6522 * is encountered then there are no frames available.
6523 */
6524
6525 if ( info->rx_buffer_list[EndIndex].count )
6526 goto Cleanup;
6527
6528 /* advance to next buffer entry in linked list */
6529 EndIndex++;
6530 if ( EndIndex == info->rx_buffer_count )
6531 EndIndex = 0;
6532
6533 /* if entire list searched then no frame available */
6534 if ( EndIndex == StartIndex ) {
6535 /* If this occurs then something bad happened,
6536 * all buffers have been 'used' but none mark
6537 * the end of a frame. Reset buffers and receiver.
6538 */
6539
6540 if ( info->rx_enabled ){
6541 spin_lock_irqsave(&info->irq_spinlock,flags);
6542 usc_start_receiver(info);
6543 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6544 }
6545 goto Cleanup;
6546 }
6547 }
6548
6549
6550 /* check status of receive frame */
6551
6552 status = info->rx_buffer_list[EndIndex].status;
6553
6554 if ( status & (RXSTATUS_SHORT_FRAME | RXSTATUS_OVERRUN |
6555 RXSTATUS_CRC_ERROR | RXSTATUS_ABORT) ) {
6556 if ( status & RXSTATUS_SHORT_FRAME )
6557 info->icount.rxshort++;
6558 else if ( status & RXSTATUS_ABORT )
6559 info->icount.rxabort++;
6560 else if ( status & RXSTATUS_OVERRUN )
6561 info->icount.rxover++;
6562 else {
6563 info->icount.rxcrc++;
6564 if ( info->params.crc_type & HDLC_CRC_RETURN_EX )
6565 return_frame = true;
6566 }
6567 framesize = 0;
6568 #if SYNCLINK_GENERIC_HDLC
6569 {
6570 info->netdev->stats.rx_errors++;
6571 info->netdev->stats.rx_frame_errors++;
6572 }
6573 #endif
6574 } else
6575 return_frame = true;
6576
6577 if ( return_frame ) {
6578 /* receive frame has no errors, get frame size.
6579 * The frame size is the starting value of the RCC (which was
6580 * set to 0xffff) minus the ending value of the RCC (decremented
6581 * once for each receive character) minus 2 for the 16-bit CRC.
6582 */
6583
6584 framesize = RCLRVALUE - info->rx_buffer_list[EndIndex].rcc;
6585
6586 /* adjust frame size for CRC if any */
6587 if ( info->params.crc_type == HDLC_CRC_16_CCITT )
6588 framesize -= 2;
6589 else if ( info->params.crc_type == HDLC_CRC_32_CCITT )
6590 framesize -= 4;
6591 }
6592
6593 if ( debug_level >= DEBUG_LEVEL_BH )
6594 printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n",
6595 __FILE__,__LINE__,info->device_name,status,framesize);
6596
6597 if ( debug_level >= DEBUG_LEVEL_DATA )
6598 mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr,
6599 min_t(int, framesize, DMABUFFERSIZE),0);
6600
6601 if (framesize) {
6602 if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) &&
6603 ((framesize+1) > info->max_frame_size) ) ||
6604 (framesize > info->max_frame_size) )
6605 info->icount.rxlong++;
6606 else {
6607 /* copy dma buffer(s) to contiguous intermediate buffer */
6608 int copy_count = framesize;
6609 int index = StartIndex;
6610 unsigned char *ptmp = info->intermediate_rxbuffer;
6611
6612 if ( !(status & RXSTATUS_CRC_ERROR))
6613 info->icount.rxok++;
6614
6615 while(copy_count) {
6616 int partial_count;
6617 if ( copy_count > DMABUFFERSIZE )
6618 partial_count = DMABUFFERSIZE;
6619 else
6620 partial_count = copy_count;
6621
6622 pBufEntry = &(info->rx_buffer_list[index]);
6623 memcpy( ptmp, pBufEntry->virt_addr, partial_count );
6624 ptmp += partial_count;
6625 copy_count -= partial_count;
6626
6627 if ( ++index == info->rx_buffer_count )
6628 index = 0;
6629 }
6630
6631 if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) {
6632 ++framesize;
6633 *ptmp = (status & RXSTATUS_CRC_ERROR ?
6634 RX_CRC_ERROR :
6635 RX_OK);
6636
6637 if ( debug_level >= DEBUG_LEVEL_DATA )
6638 printk("%s(%d):mgsl_get_rx_frame(%s) rx frame status=%d\n",
6639 __FILE__,__LINE__,info->device_name,
6640 *ptmp);
6641 }
6642
6643 #if SYNCLINK_GENERIC_HDLC
6644 if (info->netcount)
6645 hdlcdev_rx(info,info->intermediate_rxbuffer,framesize);
6646 else
6647 #endif
6648 ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
6649 }
6650 }
6651 /* Free the buffers used by this frame. */
6652 mgsl_free_rx_frame_buffers( info, StartIndex, EndIndex );
6653
6654 ReturnCode = true;
6655
6656 Cleanup:
6657
6658 if ( info->rx_enabled && info->rx_overflow ) {
6659 /* The receiver needs to restarted because of
6660 * a receive overflow (buffer or FIFO). If the
6661 * receive buffers are now empty, then restart receiver.
6662 */
6663
6664 if ( !info->rx_buffer_list[EndIndex].status &&
6665 info->rx_buffer_list[EndIndex].count ) {
6666 spin_lock_irqsave(&info->irq_spinlock,flags);
6667 usc_start_receiver(info);
6668 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6669 }
6670 }
6671
6672 return ReturnCode;
6673
6674 } /* end of mgsl_get_rx_frame() */
6675
6676 /* mgsl_get_raw_rx_frame()
6677 *
6678 * This function attempts to return a received frame from the
6679 * receive DMA buffers when running in external loop mode. In this mode,
6680 * we will return at most one DMABUFFERSIZE frame to the application.
6681 * The USC receiver is triggering off of DCD going active to start a new
6682 * frame, and DCD going inactive to terminate the frame (similar to
6683 * processing a closing flag character).
6684 *
6685 * In this routine, we will return DMABUFFERSIZE "chunks" at a time.
6686 * If DCD goes inactive, the last Rx DMA Buffer will have a non-zero
6687 * status field and the RCC field will indicate the length of the
6688 * entire received frame. We take this RCC field and get the modulus
6689 * of RCC and DMABUFFERSIZE to determine if number of bytes in the
6690 * last Rx DMA buffer and return that last portion of the frame.
6691 *
6692 * Arguments: info pointer to device extension
6693 * Return Value: true if frame returned, otherwise false
6694 */
6695 static bool mgsl_get_raw_rx_frame(struct mgsl_struct *info)
6696 {
6697 unsigned int CurrentIndex, NextIndex;
6698 unsigned short status;
6699 DMABUFFERENTRY *pBufEntry;
6700 unsigned int framesize = 0;
6701 bool ReturnCode = false;
6702 unsigned long flags;
6703 struct tty_struct *tty = info->port.tty;
6704
6705 /*
6706 * current_rx_buffer points to the 1st buffer of the next available
6707 * receive frame. The status field is set by the 16C32 after
6708 * completing a receive frame. If the status field of this buffer
6709 * is zero, either the USC is still filling this buffer or this
6710 * is one of a series of buffers making up a received frame.
6711 *
6712 * If the count field of this buffer is zero, the USC is either
6713 * using this buffer or has used this buffer. Look at the count
6714 * field of the next buffer. If that next buffer's count is
6715 * non-zero, the USC is still actively using the current buffer.
6716 * Otherwise, if the next buffer's count field is zero, the
6717 * current buffer is complete and the USC is using the next
6718 * buffer.
6719 */
6720 CurrentIndex = NextIndex = info->current_rx_buffer;
6721 ++NextIndex;
6722 if ( NextIndex == info->rx_buffer_count )
6723 NextIndex = 0;
6724
6725 if ( info->rx_buffer_list[CurrentIndex].status != 0 ||
6726 (info->rx_buffer_list[CurrentIndex].count == 0 &&
6727 info->rx_buffer_list[NextIndex].count == 0)) {
6728 /*
6729 * Either the status field of this dma buffer is non-zero
6730 * (indicating the last buffer of a receive frame) or the next
6731 * buffer is marked as in use -- implying this buffer is complete
6732 * and an intermediate buffer for this received frame.
6733 */
6734
6735 status = info->rx_buffer_list[CurrentIndex].status;
6736
6737 if ( status & (RXSTATUS_SHORT_FRAME | RXSTATUS_OVERRUN |
6738 RXSTATUS_CRC_ERROR | RXSTATUS_ABORT) ) {
6739 if ( status & RXSTATUS_SHORT_FRAME )
6740 info->icount.rxshort++;
6741 else if ( status & RXSTATUS_ABORT )
6742 info->icount.rxabort++;
6743 else if ( status & RXSTATUS_OVERRUN )
6744 info->icount.rxover++;
6745 else
6746 info->icount.rxcrc++;
6747 framesize = 0;
6748 } else {
6749 /*
6750 * A receive frame is available, get frame size and status.
6751 *
6752 * The frame size is the starting value of the RCC (which was
6753 * set to 0xffff) minus the ending value of the RCC (decremented
6754 * once for each receive character) minus 2 or 4 for the 16-bit
6755 * or 32-bit CRC.
6756 *
6757 * If the status field is zero, this is an intermediate buffer.
6758 * It's size is 4K.
6759 *
6760 * If the DMA Buffer Entry's Status field is non-zero, the
6761 * receive operation completed normally (ie: DCD dropped). The
6762 * RCC field is valid and holds the received frame size.
6763 * It is possible that the RCC field will be zero on a DMA buffer
6764 * entry with a non-zero status. This can occur if the total
6765 * frame size (number of bytes between the time DCD goes active
6766 * to the time DCD goes inactive) exceeds 65535 bytes. In this
6767 * case the 16C32 has underrun on the RCC count and appears to
6768 * stop updating this counter to let us know the actual received
6769 * frame size. If this happens (non-zero status and zero RCC),
6770 * simply return the entire RxDMA Buffer
6771 */
6772 if ( status ) {
6773 /*
6774 * In the event that the final RxDMA Buffer is
6775 * terminated with a non-zero status and the RCC
6776 * field is zero, we interpret this as the RCC
6777 * having underflowed (received frame > 65535 bytes).
6778 *
6779 * Signal the event to the user by passing back
6780 * a status of RxStatus_CrcError returning the full
6781 * buffer and let the app figure out what data is
6782 * actually valid
6783 */
6784 if ( info->rx_buffer_list[CurrentIndex].rcc )
6785 framesize = RCLRVALUE - info->rx_buffer_list[CurrentIndex].rcc;
6786 else
6787 framesize = DMABUFFERSIZE;
6788 }
6789 else
6790 framesize = DMABUFFERSIZE;
6791 }
6792
6793 if ( framesize > DMABUFFERSIZE ) {
6794 /*
6795 * if running in raw sync mode, ISR handler for
6796 * End Of Buffer events terminates all buffers at 4K.
6797 * If this frame size is said to be >4K, get the
6798 * actual number of bytes of the frame in this buffer.
6799 */
6800 framesize = framesize % DMABUFFERSIZE;
6801 }
6802
6803
6804 if ( debug_level >= DEBUG_LEVEL_BH )
6805 printk("%s(%d):mgsl_get_raw_rx_frame(%s) status=%04X size=%d\n",
6806 __FILE__,__LINE__,info->device_name,status,framesize);
6807
6808 if ( debug_level >= DEBUG_LEVEL_DATA )
6809 mgsl_trace_block(info,info->rx_buffer_list[CurrentIndex].virt_addr,
6810 min_t(int, framesize, DMABUFFERSIZE),0);
6811
6812 if (framesize) {
6813 /* copy dma buffer(s) to contiguous intermediate buffer */
6814 /* NOTE: we never copy more than DMABUFFERSIZE bytes */
6815
6816 pBufEntry = &(info->rx_buffer_list[CurrentIndex]);
6817 memcpy( info->intermediate_rxbuffer, pBufEntry->virt_addr, framesize);
6818 info->icount.rxok++;
6819
6820 ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
6821 }
6822
6823 /* Free the buffers used by this frame. */
6824 mgsl_free_rx_frame_buffers( info, CurrentIndex, CurrentIndex );
6825
6826 ReturnCode = true;
6827 }
6828
6829
6830 if ( info->rx_enabled && info->rx_overflow ) {
6831 /* The receiver needs to restarted because of
6832 * a receive overflow (buffer or FIFO). If the
6833 * receive buffers are now empty, then restart receiver.
6834 */
6835
6836 if ( !info->rx_buffer_list[CurrentIndex].status &&
6837 info->rx_buffer_list[CurrentIndex].count ) {
6838 spin_lock_irqsave(&info->irq_spinlock,flags);
6839 usc_start_receiver(info);
6840 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6841 }
6842 }
6843
6844 return ReturnCode;
6845
6846 } /* end of mgsl_get_raw_rx_frame() */
6847
6848 /* mgsl_load_tx_dma_buffer()
6849 *
6850 * Load the transmit DMA buffer with the specified data.
6851 *
6852 * Arguments:
6853 *
6854 * info pointer to device extension
6855 * Buffer pointer to buffer containing frame to load
6856 * BufferSize size in bytes of frame in Buffer
6857 *
6858 * Return Value: None
6859 */
6860 static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
6861 const char *Buffer, unsigned int BufferSize)
6862 {
6863 unsigned short Copycount;
6864 unsigned int i = 0;
6865 DMABUFFERENTRY *pBufEntry;
6866
6867 if ( debug_level >= DEBUG_LEVEL_DATA )
6868 mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1);
6869
6870 if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
6871 /* set CMR:13 to start transmit when
6872 * next GoAhead (abort) is received
6873 */
6874 info->cmr_value |= BIT13;
6875 }
6876
6877 /* begin loading the frame in the next available tx dma
6878 * buffer, remember it's starting location for setting
6879 * up tx dma operation
6880 */
6881 i = info->current_tx_buffer;
6882 info->start_tx_dma_buffer = i;
6883
6884 /* Setup the status and RCC (Frame Size) fields of the 1st */
6885 /* buffer entry in the transmit DMA buffer list. */
6886
6887 info->tx_buffer_list[i].status = info->cmr_value & 0xf000;
6888 info->tx_buffer_list[i].rcc = BufferSize;
6889 info->tx_buffer_list[i].count = BufferSize;
6890
6891 /* Copy frame data from 1st source buffer to the DMA buffers. */
6892 /* The frame data may span multiple DMA buffers. */
6893
6894 while( BufferSize ){
6895 /* Get a pointer to next DMA buffer entry. */
6896 pBufEntry = &info->tx_buffer_list[i++];
6897
6898 if ( i == info->tx_buffer_count )
6899 i=0;
6900
6901 /* Calculate the number of bytes that can be copied from */
6902 /* the source buffer to this DMA buffer. */
6903 if ( BufferSize > DMABUFFERSIZE )
6904 Copycount = DMABUFFERSIZE;
6905 else
6906 Copycount = BufferSize;
6907
6908 /* Actually copy data from source buffer to DMA buffer. */
6909 /* Also set the data count for this individual DMA buffer. */
6910 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
6911 mgsl_load_pci_memory(pBufEntry->virt_addr, Buffer,Copycount);
6912 else
6913 memcpy(pBufEntry->virt_addr, Buffer, Copycount);
6914
6915 pBufEntry->count = Copycount;
6916
6917 /* Advance source pointer and reduce remaining data count. */
6918 Buffer += Copycount;
6919 BufferSize -= Copycount;
6920
6921 ++info->tx_dma_buffers_used;
6922 }
6923
6924 /* remember next available tx dma buffer */
6925 info->current_tx_buffer = i;
6926
6927 } /* end of mgsl_load_tx_dma_buffer() */
6928
6929 /*
6930 * mgsl_register_test()
6931 *
6932 * Performs a register test of the 16C32.
6933 *
6934 * Arguments: info pointer to device instance data
6935 * Return Value: true if test passed, otherwise false
6936 */
6937 static bool mgsl_register_test( struct mgsl_struct *info )
6938 {
6939 static unsigned short BitPatterns[] =
6940 { 0x0000, 0xffff, 0xaaaa, 0x5555, 0x1234, 0x6969, 0x9696, 0x0f0f };
6941 static unsigned int Patterncount = ARRAY_SIZE(BitPatterns);
6942 unsigned int i;
6943 bool rc = true;
6944 unsigned long flags;
6945
6946 spin_lock_irqsave(&info->irq_spinlock,flags);
6947 usc_reset(info);
6948
6949 /* Verify the reset state of some registers. */
6950
6951 if ( (usc_InReg( info, SICR ) != 0) ||
6952 (usc_InReg( info, IVR ) != 0) ||
6953 (usc_InDmaReg( info, DIVR ) != 0) ){
6954 rc = false;
6955 }
6956
6957 if ( rc ){
6958 /* Write bit patterns to various registers but do it out of */
6959 /* sync, then read back and verify values. */
6960
6961 for ( i = 0 ; i < Patterncount ; i++ ) {
6962 usc_OutReg( info, TC0R, BitPatterns[i] );
6963 usc_OutReg( info, TC1R, BitPatterns[(i+1)%Patterncount] );
6964 usc_OutReg( info, TCLR, BitPatterns[(i+2)%Patterncount] );
6965 usc_OutReg( info, RCLR, BitPatterns[(i+3)%Patterncount] );
6966 usc_OutReg( info, RSR, BitPatterns[(i+4)%Patterncount] );
6967 usc_OutDmaReg( info, TBCR, BitPatterns[(i+5)%Patterncount] );
6968
6969 if ( (usc_InReg( info, TC0R ) != BitPatterns[i]) ||
6970 (usc_InReg( info, TC1R ) != BitPatterns[(i+1)%Patterncount]) ||
6971 (usc_InReg( info, TCLR ) != BitPatterns[(i+2)%Patterncount]) ||
6972 (usc_InReg( info, RCLR ) != BitPatterns[(i+3)%Patterncount]) ||
6973 (usc_InReg( info, RSR ) != BitPatterns[(i+4)%Patterncount]) ||
6974 (usc_InDmaReg( info, TBCR ) != BitPatterns[(i+5)%Patterncount]) ){
6975 rc = false;
6976 break;
6977 }
6978 }
6979 }
6980
6981 usc_reset(info);
6982 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6983
6984 return rc;
6985
6986 } /* end of mgsl_register_test() */
6987
6988 /* mgsl_irq_test() Perform interrupt test of the 16C32.
6989 *
6990 * Arguments: info pointer to device instance data
6991 * Return Value: true if test passed, otherwise false
6992 */
6993 static bool mgsl_irq_test( struct mgsl_struct *info )
6994 {
6995 unsigned long EndTime;
6996 unsigned long flags;
6997
6998 spin_lock_irqsave(&info->irq_spinlock,flags);
6999 usc_reset(info);
7000
7001 /*
7002 * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition.
7003 * The ISR sets irq_occurred to true.
7004 */
7005
7006 info->irq_occurred = false;
7007
7008 /* Enable INTEN gate for ISA adapter (Port 6, Bit12) */
7009 /* Enable INTEN (Port 6, Bit12) */
7010 /* This connects the IRQ request signal to the ISA bus */
7011 /* on the ISA adapter. This has no effect for the PCI adapter */
7012 usc_OutReg( info, PCR, (unsigned short)((usc_InReg(info, PCR) | BIT13) & ~BIT12) );
7013
7014 usc_EnableMasterIrqBit(info);
7015 usc_EnableInterrupts(info, IO_PIN);
7016 usc_ClearIrqPendingBits(info, IO_PIN);
7017
7018 usc_UnlatchIostatusBits(info, MISCSTATUS_TXC_LATCHED);
7019 usc_EnableStatusIrqs(info, SICR_TXC_ACTIVE + SICR_TXC_INACTIVE);
7020
7021 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7022
7023 EndTime=100;
7024 while( EndTime-- && !info->irq_occurred ) {
7025 msleep_interruptible(10);
7026 }
7027
7028 spin_lock_irqsave(&info->irq_spinlock,flags);
7029 usc_reset(info);
7030 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7031
7032 return info->irq_occurred;
7033
7034 } /* end of mgsl_irq_test() */
7035
7036 /* mgsl_dma_test()
7037 *
7038 * Perform a DMA test of the 16C32. A small frame is
7039 * transmitted via DMA from a transmit buffer to a receive buffer
7040 * using single buffer DMA mode.
7041 *
7042 * Arguments: info pointer to device instance data
7043 * Return Value: true if test passed, otherwise false
7044 */
7045 static bool mgsl_dma_test( struct mgsl_struct *info )
7046 {
7047 unsigned short FifoLevel;
7048 unsigned long phys_addr;
7049 unsigned int FrameSize;
7050 unsigned int i;
7051 char *TmpPtr;
7052 bool rc = true;
7053 unsigned short status=0;
7054 unsigned long EndTime;
7055 unsigned long flags;
7056 MGSL_PARAMS tmp_params;
7057
7058 /* save current port options */
7059 memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS));
7060 /* load default port options */
7061 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
7062
7063 #define TESTFRAMESIZE 40
7064
7065 spin_lock_irqsave(&info->irq_spinlock,flags);
7066
7067 /* setup 16C32 for SDLC DMA transfer mode */
7068
7069 usc_reset(info);
7070 usc_set_sdlc_mode(info);
7071 usc_enable_loopback(info,1);
7072
7073 /* Reprogram the RDMR so that the 16C32 does NOT clear the count
7074 * field of the buffer entry after fetching buffer address. This
7075 * way we can detect a DMA failure for a DMA read (which should be
7076 * non-destructive to system memory) before we try and write to
7077 * memory (where a failure could corrupt system memory).
7078 */
7079
7080 /* Receive DMA mode Register (RDMR)
7081 *
7082 * <15..14> 11 DMA mode = Linked List Buffer mode
7083 * <13> 1 RSBinA/L = store Rx status Block in List entry
7084 * <12> 0 1 = Clear count of List Entry after fetching
7085 * <11..10> 00 Address mode = Increment
7086 * <9> 1 Terminate Buffer on RxBound
7087 * <8> 0 Bus Width = 16bits
7088 * <7..0> ? status Bits (write as 0s)
7089 *
7090 * 1110 0010 0000 0000 = 0xe200
7091 */
7092
7093 usc_OutDmaReg( info, RDMR, 0xe200 );
7094
7095 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7096
7097
7098 /* SETUP TRANSMIT AND RECEIVE DMA BUFFERS */
7099
7100 FrameSize = TESTFRAMESIZE;
7101
7102 /* setup 1st transmit buffer entry: */
7103 /* with frame size and transmit control word */
7104
7105 info->tx_buffer_list[0].count = FrameSize;
7106 info->tx_buffer_list[0].rcc = FrameSize;
7107 info->tx_buffer_list[0].status = 0x4000;
7108
7109 /* build a transmit frame in 1st transmit DMA buffer */
7110
7111 TmpPtr = info->tx_buffer_list[0].virt_addr;
7112 for (i = 0; i < FrameSize; i++ )
7113 *TmpPtr++ = i;
7114
7115 /* setup 1st receive buffer entry: */
7116 /* clear status, set max receive buffer size */
7117
7118 info->rx_buffer_list[0].status = 0;
7119 info->rx_buffer_list[0].count = FrameSize + 4;
7120
7121 /* zero out the 1st receive buffer */
7122
7123 memset( info->rx_buffer_list[0].virt_addr, 0, FrameSize + 4 );
7124
7125 /* Set count field of next buffer entries to prevent */
7126 /* 16C32 from using buffers after the 1st one. */
7127
7128 info->tx_buffer_list[1].count = 0;
7129 info->rx_buffer_list[1].count = 0;
7130
7131
7132 /***************************/
7133 /* Program 16C32 receiver. */
7134 /***************************/
7135
7136 spin_lock_irqsave(&info->irq_spinlock,flags);
7137
7138 /* setup DMA transfers */
7139 usc_RTCmd( info, RTCmd_PurgeRxFifo );
7140
7141 /* program 16C32 receiver with physical address of 1st DMA buffer entry */
7142 phys_addr = info->rx_buffer_list[0].phys_entry;
7143 usc_OutDmaReg( info, NRARL, (unsigned short)phys_addr );
7144 usc_OutDmaReg( info, NRARU, (unsigned short)(phys_addr >> 16) );
7145
7146 /* Clear the Rx DMA status bits (read RDMR) and start channel */
7147 usc_InDmaReg( info, RDMR );
7148 usc_DmaCmd( info, DmaCmd_InitRxChannel );
7149
7150 /* Enable Receiver (RMR <1..0> = 10) */
7151 usc_OutReg( info, RMR, (unsigned short)((usc_InReg(info, RMR) & 0xfffc) | 0x0002) );
7152
7153 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7154
7155
7156 /*************************************************************/
7157 /* WAIT FOR RECEIVER TO DMA ALL PARAMETERS FROM BUFFER ENTRY */
7158 /*************************************************************/
7159
7160 /* Wait 100ms for interrupt. */
7161 EndTime = jiffies + msecs_to_jiffies(100);
7162
7163 for(;;) {
7164 if (time_after(jiffies, EndTime)) {
7165 rc = false;
7166 break;
7167 }
7168
7169 spin_lock_irqsave(&info->irq_spinlock,flags);
7170 status = usc_InDmaReg( info, RDMR );
7171 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7172
7173 if ( !(status & BIT4) && (status & BIT5) ) {
7174 /* INITG (BIT 4) is inactive (no entry read in progress) AND */
7175 /* BUSY (BIT 5) is active (channel still active). */
7176 /* This means the buffer entry read has completed. */
7177 break;
7178 }
7179 }
7180
7181
7182 /******************************/
7183 /* Program 16C32 transmitter. */
7184 /******************************/
7185
7186 spin_lock_irqsave(&info->irq_spinlock,flags);
7187
7188 /* Program the Transmit Character Length Register (TCLR) */
7189 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
7190
7191 usc_OutReg( info, TCLR, (unsigned short)info->tx_buffer_list[0].count );
7192 usc_RTCmd( info, RTCmd_PurgeTxFifo );
7193
7194 /* Program the address of the 1st DMA Buffer Entry in linked list */
7195
7196 phys_addr = info->tx_buffer_list[0].phys_entry;
7197 usc_OutDmaReg( info, NTARL, (unsigned short)phys_addr );
7198 usc_OutDmaReg( info, NTARU, (unsigned short)(phys_addr >> 16) );
7199
7200 /* unlatch Tx status bits, and start transmit channel. */
7201
7202 usc_OutReg( info, TCSR, (unsigned short)(( usc_InReg(info, TCSR) & 0x0f00) | 0xfa) );
7203 usc_DmaCmd( info, DmaCmd_InitTxChannel );
7204
7205 /* wait for DMA controller to fill transmit FIFO */
7206
7207 usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
7208
7209 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7210
7211
7212 /**********************************/
7213 /* WAIT FOR TRANSMIT FIFO TO FILL */
7214 /**********************************/
7215
7216 /* Wait 100ms */
7217 EndTime = jiffies + msecs_to_jiffies(100);
7218
7219 for(;;) {
7220 if (time_after(jiffies, EndTime)) {
7221 rc = false;
7222 break;
7223 }
7224
7225 spin_lock_irqsave(&info->irq_spinlock,flags);
7226 FifoLevel = usc_InReg(info, TICR) >> 8;
7227 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7228
7229 if ( FifoLevel < 16 )
7230 break;
7231 else
7232 if ( FrameSize < 32 ) {
7233 /* This frame is smaller than the entire transmit FIFO */
7234 /* so wait for the entire frame to be loaded. */
7235 if ( FifoLevel <= (32 - FrameSize) )
7236 break;
7237 }
7238 }
7239
7240
7241 if ( rc )
7242 {
7243 /* Enable 16C32 transmitter. */
7244
7245 spin_lock_irqsave(&info->irq_spinlock,flags);
7246
7247 /* Transmit mode Register (TMR), <1..0> = 10, Enable Transmitter */
7248 usc_TCmd( info, TCmd_SendFrame );
7249 usc_OutReg( info, TMR, (unsigned short)((usc_InReg(info, TMR) & 0xfffc) | 0x0002) );
7250
7251 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7252
7253
7254 /******************************/
7255 /* WAIT FOR TRANSMIT COMPLETE */
7256 /******************************/
7257
7258 /* Wait 100ms */
7259 EndTime = jiffies + msecs_to_jiffies(100);
7260
7261 /* While timer not expired wait for transmit complete */
7262
7263 spin_lock_irqsave(&info->irq_spinlock,flags);
7264 status = usc_InReg( info, TCSR );
7265 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7266
7267 while ( !(status & (BIT6 | BIT5 | BIT4 | BIT2 | BIT1)) ) {
7268 if (time_after(jiffies, EndTime)) {
7269 rc = false;
7270 break;
7271 }
7272
7273 spin_lock_irqsave(&info->irq_spinlock,flags);
7274 status = usc_InReg( info, TCSR );
7275 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7276 }
7277 }
7278
7279
7280 if ( rc ){
7281 /* CHECK FOR TRANSMIT ERRORS */
7282 if ( status & (BIT5 | BIT1) )
7283 rc = false;
7284 }
7285
7286 if ( rc ) {
7287 /* WAIT FOR RECEIVE COMPLETE */
7288
7289 /* Wait 100ms */
7290 EndTime = jiffies + msecs_to_jiffies(100);
7291
7292 /* Wait for 16C32 to write receive status to buffer entry. */
7293 status=info->rx_buffer_list[0].status;
7294 while ( status == 0 ) {
7295 if (time_after(jiffies, EndTime)) {
7296 rc = false;
7297 break;
7298 }
7299 status=info->rx_buffer_list[0].status;
7300 }
7301 }
7302
7303
7304 if ( rc ) {
7305 /* CHECK FOR RECEIVE ERRORS */
7306 status = info->rx_buffer_list[0].status;
7307
7308 if ( status & (BIT8 | BIT3 | BIT1) ) {
7309 /* receive error has occurred */
7310 rc = false;
7311 } else {
7312 if ( memcmp( info->tx_buffer_list[0].virt_addr ,
7313 info->rx_buffer_list[0].virt_addr, FrameSize ) ){
7314 rc = false;
7315 }
7316 }
7317 }
7318
7319 spin_lock_irqsave(&info->irq_spinlock,flags);
7320 usc_reset( info );
7321 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7322
7323 /* restore current port options */
7324 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
7325
7326 return rc;
7327
7328 } /* end of mgsl_dma_test() */
7329
7330 /* mgsl_adapter_test()
7331 *
7332 * Perform the register, IRQ, and DMA tests for the 16C32.
7333 *
7334 * Arguments: info pointer to device instance data
7335 * Return Value: 0 if success, otherwise -ENODEV
7336 */
7337 static int mgsl_adapter_test( struct mgsl_struct *info )
7338 {
7339 if ( debug_level >= DEBUG_LEVEL_INFO )
7340 printk( "%s(%d):Testing device %s\n",
7341 __FILE__,__LINE__,info->device_name );
7342
7343 if ( !mgsl_register_test( info ) ) {
7344 info->init_error = DiagStatus_AddressFailure;
7345 printk( "%s(%d):Register test failure for device %s Addr=%04X\n",
7346 __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) );
7347 return -ENODEV;
7348 }
7349
7350 if ( !mgsl_irq_test( info ) ) {
7351 info->init_error = DiagStatus_IrqFailure;
7352 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
7353 __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
7354 return -ENODEV;
7355 }
7356
7357 if ( !mgsl_dma_test( info ) ) {
7358 info->init_error = DiagStatus_DmaFailure;
7359 printk( "%s(%d):DMA test failure for device %s DMA=%d\n",
7360 __FILE__,__LINE__,info->device_name, (unsigned short)(info->dma_level) );
7361 return -ENODEV;
7362 }
7363
7364 if ( debug_level >= DEBUG_LEVEL_INFO )
7365 printk( "%s(%d):device %s passed diagnostics\n",
7366 __FILE__,__LINE__,info->device_name );
7367
7368 return 0;
7369
7370 } /* end of mgsl_adapter_test() */
7371
7372 /* mgsl_memory_test()
7373 *
7374 * Test the shared memory on a PCI adapter.
7375 *
7376 * Arguments: info pointer to device instance data
7377 * Return Value: true if test passed, otherwise false
7378 */
7379 static bool mgsl_memory_test( struct mgsl_struct *info )
7380 {
7381 static unsigned long BitPatterns[] =
7382 { 0x0, 0x55555555, 0xaaaaaaaa, 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
7383 unsigned long Patterncount = ARRAY_SIZE(BitPatterns);
7384 unsigned long i;
7385 unsigned long TestLimit = SHARED_MEM_ADDRESS_SIZE/sizeof(unsigned long);
7386 unsigned long * TestAddr;
7387
7388 if ( info->bus_type != MGSL_BUS_TYPE_PCI )
7389 return true;
7390
7391 TestAddr = (unsigned long *)info->memory_base;
7392
7393 /* Test data lines with test pattern at one location. */
7394
7395 for ( i = 0 ; i < Patterncount ; i++ ) {
7396 *TestAddr = BitPatterns[i];
7397 if ( *TestAddr != BitPatterns[i] )
7398 return false;
7399 }
7400
7401 /* Test address lines with incrementing pattern over */
7402 /* entire address range. */
7403
7404 for ( i = 0 ; i < TestLimit ; i++ ) {
7405 *TestAddr = i * 4;
7406 TestAddr++;
7407 }
7408
7409 TestAddr = (unsigned long *)info->memory_base;
7410
7411 for ( i = 0 ; i < TestLimit ; i++ ) {
7412 if ( *TestAddr != i * 4 )
7413 return false;
7414 TestAddr++;
7415 }
7416
7417 memset( info->memory_base, 0, SHARED_MEM_ADDRESS_SIZE );
7418
7419 return true;
7420
7421 } /* End Of mgsl_memory_test() */
7422
7423
7424 /* mgsl_load_pci_memory()
7425 *
7426 * Load a large block of data into the PCI shared memory.
7427 * Use this instead of memcpy() or memmove() to move data
7428 * into the PCI shared memory.
7429 *
7430 * Notes:
7431 *
7432 * This function prevents the PCI9050 interface chip from hogging
7433 * the adapter local bus, which can starve the 16C32 by preventing
7434 * 16C32 bus master cycles.
7435 *
7436 * The PCI9050 documentation says that the 9050 will always release
7437 * control of the local bus after completing the current read
7438 * or write operation.
7439 *
7440 * It appears that as long as the PCI9050 write FIFO is full, the
7441 * PCI9050 treats all of the writes as a single burst transaction
7442 * and will not release the bus. This causes DMA latency problems
7443 * at high speeds when copying large data blocks to the shared
7444 * memory.
7445 *
7446 * This function in effect, breaks the a large shared memory write
7447 * into multiple transations by interleaving a shared memory read
7448 * which will flush the write FIFO and 'complete' the write
7449 * transation. This allows any pending DMA request to gain control
7450 * of the local bus in a timely fasion.
7451 *
7452 * Arguments:
7453 *
7454 * TargetPtr pointer to target address in PCI shared memory
7455 * SourcePtr pointer to source buffer for data
7456 * count count in bytes of data to copy
7457 *
7458 * Return Value: None
7459 */
7460 static void mgsl_load_pci_memory( char* TargetPtr, const char* SourcePtr,
7461 unsigned short count )
7462 {
7463 /* 16 32-bit writes @ 60ns each = 960ns max latency on local bus */
7464 #define PCI_LOAD_INTERVAL 64
7465
7466 unsigned short Intervalcount = count / PCI_LOAD_INTERVAL;
7467 unsigned short Index;
7468 unsigned long Dummy;
7469
7470 for ( Index = 0 ; Index < Intervalcount ; Index++ )
7471 {
7472 memcpy(TargetPtr, SourcePtr, PCI_LOAD_INTERVAL);
7473 Dummy = *((volatile unsigned long *)TargetPtr);
7474 TargetPtr += PCI_LOAD_INTERVAL;
7475 SourcePtr += PCI_LOAD_INTERVAL;
7476 }
7477
7478 memcpy( TargetPtr, SourcePtr, count % PCI_LOAD_INTERVAL );
7479
7480 } /* End Of mgsl_load_pci_memory() */
7481
7482 static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit)
7483 {
7484 int i;
7485 int linecount;
7486 if (xmit)
7487 printk("%s tx data:\n",info->device_name);
7488 else
7489 printk("%s rx data:\n",info->device_name);
7490
7491 while(count) {
7492 if (count > 16)
7493 linecount = 16;
7494 else
7495 linecount = count;
7496
7497 for(i=0;i<linecount;i++)
7498 printk("%02X ",(unsigned char)data[i]);
7499 for(;i<17;i++)
7500 printk(" ");
7501 for(i=0;i<linecount;i++) {
7502 if (data[i]>=040 && data[i]<=0176)
7503 printk("%c",data[i]);
7504 else
7505 printk(".");
7506 }
7507 printk("\n");
7508
7509 data += linecount;
7510 count -= linecount;
7511 }
7512 } /* end of mgsl_trace_block() */
7513
7514 /* mgsl_tx_timeout()
7515 *
7516 * called when HDLC frame times out
7517 * update stats and do tx completion processing
7518 *
7519 * Arguments: context pointer to device instance data
7520 * Return Value: None
7521 */
7522 static void mgsl_tx_timeout(unsigned long context)
7523 {
7524 struct mgsl_struct *info = (struct mgsl_struct*)context;
7525 unsigned long flags;
7526
7527 if ( debug_level >= DEBUG_LEVEL_INFO )
7528 printk( "%s(%d):mgsl_tx_timeout(%s)\n",
7529 __FILE__,__LINE__,info->device_name);
7530 if(info->tx_active &&
7531 (info->params.mode == MGSL_MODE_HDLC ||
7532 info->params.mode == MGSL_MODE_RAW) ) {
7533 info->icount.txtimeout++;
7534 }
7535 spin_lock_irqsave(&info->irq_spinlock,flags);
7536 info->tx_active = false;
7537 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
7538
7539 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
7540 usc_loopmode_cancel_transmit( info );
7541
7542 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7543
7544 #if SYNCLINK_GENERIC_HDLC
7545 if (info->netcount)
7546 hdlcdev_tx_done(info);
7547 else
7548 #endif
7549 mgsl_bh_transmit(info);
7550
7551 } /* end of mgsl_tx_timeout() */
7552
7553 /* signal that there are no more frames to send, so that
7554 * line is 'released' by echoing RxD to TxD when current
7555 * transmission is complete (or immediately if no tx in progress).
7556 */
7557 static int mgsl_loopmode_send_done( struct mgsl_struct * info )
7558 {
7559 unsigned long flags;
7560
7561 spin_lock_irqsave(&info->irq_spinlock,flags);
7562 if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
7563 if (info->tx_active)
7564 info->loopmode_send_done_requested = true;
7565 else
7566 usc_loopmode_send_done(info);
7567 }
7568 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7569
7570 return 0;
7571 }
7572
7573 /* release the line by echoing RxD to TxD
7574 * upon completion of a transmit frame
7575 */
7576 static void usc_loopmode_send_done( struct mgsl_struct * info )
7577 {
7578 info->loopmode_send_done_requested = false;
7579 /* clear CMR:13 to 0 to start echoing RxData to TxData */
7580 info->cmr_value &= ~BIT13;
7581 usc_OutReg(info, CMR, info->cmr_value);
7582 }
7583
7584 /* abort a transmit in progress while in HDLC LoopMode
7585 */
7586 static void usc_loopmode_cancel_transmit( struct mgsl_struct * info )
7587 {
7588 /* reset tx dma channel and purge TxFifo */
7589 usc_RTCmd( info, RTCmd_PurgeTxFifo );
7590 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
7591 usc_loopmode_send_done( info );
7592 }
7593
7594 /* for HDLC/SDLC LoopMode, setting CMR:13 after the transmitter is enabled
7595 * is an Insert Into Loop action. Upon receipt of a GoAhead sequence (RxAbort)
7596 * we must clear CMR:13 to begin repeating TxData to RxData
7597 */
7598 static void usc_loopmode_insert_request( struct mgsl_struct * info )
7599 {
7600 info->loopmode_insert_requested = true;
7601
7602 /* enable RxAbort irq. On next RxAbort, clear CMR:13 to
7603 * begin repeating TxData on RxData (complete insertion)
7604 */
7605 usc_OutReg( info, RICR,
7606 (usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) );
7607
7608 /* set CMR:13 to insert into loop on next GoAhead (RxAbort) */
7609 info->cmr_value |= BIT13;
7610 usc_OutReg(info, CMR, info->cmr_value);
7611 }
7612
7613 /* return 1 if station is inserted into the loop, otherwise 0
7614 */
7615 static int usc_loopmode_active( struct mgsl_struct * info)
7616 {
7617 return usc_InReg( info, CCSR ) & BIT7 ? 1 : 0 ;
7618 }
7619
7620 #if SYNCLINK_GENERIC_HDLC
7621
7622 /**
7623 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
7624 * set encoding and frame check sequence (FCS) options
7625 *
7626 * dev pointer to network device structure
7627 * encoding serial encoding setting
7628 * parity FCS setting
7629 *
7630 * returns 0 if success, otherwise error code
7631 */
7632 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
7633 unsigned short parity)
7634 {
7635 struct mgsl_struct *info = dev_to_port(dev);
7636 unsigned char new_encoding;
7637 unsigned short new_crctype;
7638
7639 /* return error if TTY interface open */
7640 if (info->port.count)
7641 return -EBUSY;
7642
7643 switch (encoding)
7644 {
7645 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
7646 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
7647 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
7648 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
7649 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
7650 default: return -EINVAL;
7651 }
7652
7653 switch (parity)
7654 {
7655 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
7656 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
7657 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
7658 default: return -EINVAL;
7659 }
7660
7661 info->params.encoding = new_encoding;
7662 info->params.crc_type = new_crctype;
7663
7664 /* if network interface up, reprogram hardware */
7665 if (info->netcount)
7666 mgsl_program_hw(info);
7667
7668 return 0;
7669 }
7670
7671 /**
7672 * called by generic HDLC layer to send frame
7673 *
7674 * skb socket buffer containing HDLC frame
7675 * dev pointer to network device structure
7676 */
7677 static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
7678 struct net_device *dev)
7679 {
7680 struct mgsl_struct *info = dev_to_port(dev);
7681 unsigned long flags;
7682
7683 if (debug_level >= DEBUG_LEVEL_INFO)
7684 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
7685
7686 /* stop sending until this frame completes */
7687 netif_stop_queue(dev);
7688
7689 /* copy data to device buffers */
7690 info->xmit_cnt = skb->len;
7691 mgsl_load_tx_dma_buffer(info, skb->data, skb->len);
7692
7693 /* update network statistics */
7694 dev->stats.tx_packets++;
7695 dev->stats.tx_bytes += skb->len;
7696
7697 /* done with socket buffer, so free it */
7698 dev_kfree_skb(skb);
7699
7700 /* save start time for transmit timeout detection */
7701 netif_trans_update(dev);
7702
7703 /* start hardware transmitter if necessary */
7704 spin_lock_irqsave(&info->irq_spinlock,flags);
7705 if (!info->tx_active)
7706 usc_start_transmitter(info);
7707 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7708
7709 return NETDEV_TX_OK;
7710 }
7711
7712 /**
7713 * called by network layer when interface enabled
7714 * claim resources and initialize hardware
7715 *
7716 * dev pointer to network device structure
7717 *
7718 * returns 0 if success, otherwise error code
7719 */
7720 static int hdlcdev_open(struct net_device *dev)
7721 {
7722 struct mgsl_struct *info = dev_to_port(dev);
7723 int rc;
7724 unsigned long flags;
7725
7726 if (debug_level >= DEBUG_LEVEL_INFO)
7727 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
7728
7729 /* generic HDLC layer open processing */
7730 rc = hdlc_open(dev);
7731 if (rc)
7732 return rc;
7733
7734 /* arbitrate between network and tty opens */
7735 spin_lock_irqsave(&info->netlock, flags);
7736 if (info->port.count != 0 || info->netcount != 0) {
7737 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
7738 spin_unlock_irqrestore(&info->netlock, flags);
7739 return -EBUSY;
7740 }
7741 info->netcount=1;
7742 spin_unlock_irqrestore(&info->netlock, flags);
7743
7744 /* claim resources and init adapter */
7745 if ((rc = startup(info)) != 0) {
7746 spin_lock_irqsave(&info->netlock, flags);
7747 info->netcount=0;
7748 spin_unlock_irqrestore(&info->netlock, flags);
7749 return rc;
7750 }
7751
7752 /* assert RTS and DTR, apply hardware settings */
7753 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
7754 mgsl_program_hw(info);
7755
7756 /* enable network layer transmit */
7757 netif_trans_update(dev);
7758 netif_start_queue(dev);
7759
7760 /* inform generic HDLC layer of current DCD status */
7761 spin_lock_irqsave(&info->irq_spinlock, flags);
7762 usc_get_serial_signals(info);
7763 spin_unlock_irqrestore(&info->irq_spinlock, flags);
7764 if (info->serial_signals & SerialSignal_DCD)
7765 netif_carrier_on(dev);
7766 else
7767 netif_carrier_off(dev);
7768 return 0;
7769 }
7770
7771 /**
7772 * called by network layer when interface is disabled
7773 * shutdown hardware and release resources
7774 *
7775 * dev pointer to network device structure
7776 *
7777 * returns 0 if success, otherwise error code
7778 */
7779 static int hdlcdev_close(struct net_device *dev)
7780 {
7781 struct mgsl_struct *info = dev_to_port(dev);
7782 unsigned long flags;
7783
7784 if (debug_level >= DEBUG_LEVEL_INFO)
7785 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
7786
7787 netif_stop_queue(dev);
7788
7789 /* shutdown adapter and release resources */
7790 shutdown(info);
7791
7792 hdlc_close(dev);
7793
7794 spin_lock_irqsave(&info->netlock, flags);
7795 info->netcount=0;
7796 spin_unlock_irqrestore(&info->netlock, flags);
7797
7798 return 0;
7799 }
7800
7801 /**
7802 * called by network layer to process IOCTL call to network device
7803 *
7804 * dev pointer to network device structure
7805 * ifr pointer to network interface request structure
7806 * cmd IOCTL command code
7807 *
7808 * returns 0 if success, otherwise error code
7809 */
7810 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
7811 {
7812 const size_t size = sizeof(sync_serial_settings);
7813 sync_serial_settings new_line;
7814 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
7815 struct mgsl_struct *info = dev_to_port(dev);
7816 unsigned int flags;
7817
7818 if (debug_level >= DEBUG_LEVEL_INFO)
7819 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
7820
7821 /* return error if TTY interface open */
7822 if (info->port.count)
7823 return -EBUSY;
7824
7825 if (cmd != SIOCWANDEV)
7826 return hdlc_ioctl(dev, ifr, cmd);
7827
7828 switch(ifr->ifr_settings.type) {
7829 case IF_GET_IFACE: /* return current sync_serial_settings */
7830
7831 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
7832 if (ifr->ifr_settings.size < size) {
7833 ifr->ifr_settings.size = size; /* data size wanted */
7834 return -ENOBUFS;
7835 }
7836
7837 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7838 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7839 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7840 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
7841
7842 memset(&new_line, 0, sizeof(new_line));
7843 switch (flags){
7844 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
7845 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
7846 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
7847 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
7848 default: new_line.clock_type = CLOCK_DEFAULT;
7849 }
7850
7851 new_line.clock_rate = info->params.clock_speed;
7852 new_line.loopback = info->params.loopback ? 1:0;
7853
7854 if (copy_to_user(line, &new_line, size))
7855 return -EFAULT;
7856 return 0;
7857
7858 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
7859
7860 if(!capable(CAP_NET_ADMIN))
7861 return -EPERM;
7862 if (copy_from_user(&new_line, line, size))
7863 return -EFAULT;
7864
7865 switch (new_line.clock_type)
7866 {
7867 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
7868 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
7869 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
7870 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
7871 case CLOCK_DEFAULT: flags = info->params.flags &
7872 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7873 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7874 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7875 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
7876 default: return -EINVAL;
7877 }
7878
7879 if (new_line.loopback != 0 && new_line.loopback != 1)
7880 return -EINVAL;
7881
7882 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7883 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7884 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7885 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
7886 info->params.flags |= flags;
7887
7888 info->params.loopback = new_line.loopback;
7889
7890 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
7891 info->params.clock_speed = new_line.clock_rate;
7892 else
7893 info->params.clock_speed = 0;
7894
7895 /* if network interface up, reprogram hardware */
7896 if (info->netcount)
7897 mgsl_program_hw(info);
7898 return 0;
7899
7900 default:
7901 return hdlc_ioctl(dev, ifr, cmd);
7902 }
7903 }
7904
7905 /**
7906 * called by network layer when transmit timeout is detected
7907 *
7908 * dev pointer to network device structure
7909 */
7910 static void hdlcdev_tx_timeout(struct net_device *dev)
7911 {
7912 struct mgsl_struct *info = dev_to_port(dev);
7913 unsigned long flags;
7914
7915 if (debug_level >= DEBUG_LEVEL_INFO)
7916 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
7917
7918 dev->stats.tx_errors++;
7919 dev->stats.tx_aborted_errors++;
7920
7921 spin_lock_irqsave(&info->irq_spinlock,flags);
7922 usc_stop_transmitter(info);
7923 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7924
7925 netif_wake_queue(dev);
7926 }
7927
7928 /**
7929 * called by device driver when transmit completes
7930 * reenable network layer transmit if stopped
7931 *
7932 * info pointer to device instance information
7933 */
7934 static void hdlcdev_tx_done(struct mgsl_struct *info)
7935 {
7936 if (netif_queue_stopped(info->netdev))
7937 netif_wake_queue(info->netdev);
7938 }
7939
7940 /**
7941 * called by device driver when frame received
7942 * pass frame to network layer
7943 *
7944 * info pointer to device instance information
7945 * buf pointer to buffer contianing frame data
7946 * size count of data bytes in buf
7947 */
7948 static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size)
7949 {
7950 struct sk_buff *skb = dev_alloc_skb(size);
7951 struct net_device *dev = info->netdev;
7952
7953 if (debug_level >= DEBUG_LEVEL_INFO)
7954 printk("hdlcdev_rx(%s)\n", dev->name);
7955
7956 if (skb == NULL) {
7957 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
7958 dev->name);
7959 dev->stats.rx_dropped++;
7960 return;
7961 }
7962
7963 memcpy(skb_put(skb, size), buf, size);
7964
7965 skb->protocol = hdlc_type_trans(skb, dev);
7966
7967 dev->stats.rx_packets++;
7968 dev->stats.rx_bytes += size;
7969
7970 netif_rx(skb);
7971 }
7972
7973 static const struct net_device_ops hdlcdev_ops = {
7974 .ndo_open = hdlcdev_open,
7975 .ndo_stop = hdlcdev_close,
7976 .ndo_start_xmit = hdlc_start_xmit,
7977 .ndo_do_ioctl = hdlcdev_ioctl,
7978 .ndo_tx_timeout = hdlcdev_tx_timeout,
7979 };
7980
7981 /**
7982 * called by device driver when adding device instance
7983 * do generic HDLC initialization
7984 *
7985 * info pointer to device instance information
7986 *
7987 * returns 0 if success, otherwise error code
7988 */
7989 static int hdlcdev_init(struct mgsl_struct *info)
7990 {
7991 int rc;
7992 struct net_device *dev;
7993 hdlc_device *hdlc;
7994
7995 /* allocate and initialize network and HDLC layer objects */
7996
7997 dev = alloc_hdlcdev(info);
7998 if (!dev) {
7999 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
8000 return -ENOMEM;
8001 }
8002
8003 /* for network layer reporting purposes only */
8004 dev->base_addr = info->io_base;
8005 dev->irq = info->irq_level;
8006 dev->dma = info->dma_level;
8007
8008 /* network layer callbacks and settings */
8009 dev->netdev_ops = &hdlcdev_ops;
8010 dev->watchdog_timeo = 10 * HZ;
8011 dev->tx_queue_len = 50;
8012
8013 /* generic HDLC layer callbacks and settings */
8014 hdlc = dev_to_hdlc(dev);
8015 hdlc->attach = hdlcdev_attach;
8016 hdlc->xmit = hdlcdev_xmit;
8017
8018 /* register objects with HDLC layer */
8019 rc = register_hdlc_device(dev);
8020 if (rc) {
8021 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
8022 free_netdev(dev);
8023 return rc;
8024 }
8025
8026 info->netdev = dev;
8027 return 0;
8028 }
8029
8030 /**
8031 * called by device driver when removing device instance
8032 * do generic HDLC cleanup
8033 *
8034 * info pointer to device instance information
8035 */
8036 static void hdlcdev_exit(struct mgsl_struct *info)
8037 {
8038 unregister_hdlc_device(info->netdev);
8039 free_netdev(info->netdev);
8040 info->netdev = NULL;
8041 }
8042
8043 #endif /* CONFIG_HDLC */
8044
8045
8046 static int synclink_init_one (struct pci_dev *dev,
8047 const struct pci_device_id *ent)
8048 {
8049 struct mgsl_struct *info;
8050
8051 if (pci_enable_device(dev)) {
8052 printk("error enabling pci device %p\n", dev);
8053 return -EIO;
8054 }
8055
8056 info = mgsl_allocate_device();
8057 if (!info) {
8058 printk("can't allocate device instance data.\n");
8059 return -EIO;
8060 }
8061
8062 /* Copy user configuration info to device instance data */
8063
8064 info->io_base = pci_resource_start(dev, 2);
8065 info->irq_level = dev->irq;
8066 info->phys_memory_base = pci_resource_start(dev, 3);
8067
8068 /* Because veremap only works on page boundaries we must map
8069 * a larger area than is actually implemented for the LCR
8070 * memory range. We map a full page starting at the page boundary.
8071 */
8072 info->phys_lcr_base = pci_resource_start(dev, 0);
8073 info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
8074 info->phys_lcr_base &= ~(PAGE_SIZE-1);
8075
8076 info->bus_type = MGSL_BUS_TYPE_PCI;
8077 info->io_addr_size = 8;
8078 info->irq_flags = IRQF_SHARED;
8079
8080 if (dev->device == 0x0210) {
8081 /* Version 1 PCI9030 based universal PCI adapter */
8082 info->misc_ctrl_value = 0x007c4080;
8083 info->hw_version = 1;
8084 } else {
8085 /* Version 0 PCI9050 based 5V PCI adapter
8086 * A PCI9050 bug prevents reading LCR registers if
8087 * LCR base address bit 7 is set. Maintain shadow
8088 * value so we can write to LCR misc control reg.
8089 */
8090 info->misc_ctrl_value = 0x087e4546;
8091 info->hw_version = 0;
8092 }
8093
8094 mgsl_add_device(info);
8095
8096 return 0;
8097 }
8098
8099 static void synclink_remove_one (struct pci_dev *dev)
8100 {
8101 }
8102
Linux with added FPC-III support