sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / video / fbdev / xilinxfb.c
blob17dc119c7a9849e6b98c296f245f19e93a833256
1 /*
2 * Xilinx TFT frame buffer driver
4 * Author: MontaVista Software, Inc.
5 * source@mvista.com
7 * 2002-2007 (c) MontaVista Software, Inc.
8 * 2007 (c) Secret Lab Technologies, Ltd.
9 * 2009 (c) Xilinx Inc.
11 * This file is licensed under the terms of the GNU General Public License
12 * version 2. This program is licensed "as is" without any warranty of any
13 * kind, whether express or implied.
17 * This driver was based on au1100fb.c by MontaVista rewritten for 2.6
18 * by Embedded Alley Solutions <source@embeddedalley.com>, which in turn
19 * was based on skeletonfb.c, Skeleton for a frame buffer device by
20 * Geert Uytterhoeven.
23 #include <linux/device.h>
24 #include <linux/module.h>
25 #include <linux/kernel.h>
26 #include <linux/errno.h>
27 #include <linux/string.h>
28 #include <linux/mm.h>
29 #include <linux/fb.h>
30 #include <linux/init.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/of_device.h>
33 #include <linux/of_platform.h>
34 #include <linux/of_address.h>
35 #include <linux/io.h>
36 #include <linux/slab.h>
38 #ifdef CONFIG_PPC_DCR
39 #include <asm/dcr.h>
40 #endif
42 #define DRIVER_NAME "xilinxfb"
46 * Xilinx calls it "TFT LCD Controller" though it can also be used for
47 * the VGA port on the Xilinx ML40x board. This is a hardware display
48 * controller for a 640x480 resolution TFT or VGA screen.
50 * The interface to the framebuffer is nice and simple. There are two
51 * control registers. The first tells the LCD interface where in memory
52 * the frame buffer is (only the 11 most significant bits are used, so
53 * don't start thinking about scrolling). The second allows the LCD to
54 * be turned on or off as well as rotated 180 degrees.
56 * In case of direct BUS access the second control register will be at
57 * an offset of 4 as compared to the DCR access where the offset is 1
58 * i.e. REG_CTRL. So this is taken care in the function
59 * xilinx_fb_out32 where it left shifts the offset 2 times in case of
60 * direct BUS access.
62 #define NUM_REGS 2
63 #define REG_FB_ADDR 0
64 #define REG_CTRL 1
65 #define REG_CTRL_ENABLE 0x0001
66 #define REG_CTRL_ROTATE 0x0002
69 * The hardware only handles a single mode: 640x480 24 bit true
70 * color. Each pixel gets a word (32 bits) of memory. Within each word,
71 * the 8 most significant bits are ignored, the next 8 bits are the red
72 * level, the next 8 bits are the green level and the 8 least
73 * significant bits are the blue level. Each row of the LCD uses 1024
74 * words, but only the first 640 pixels are displayed with the other 384
75 * words being ignored. There are 480 rows.
77 #define BYTES_PER_PIXEL 4
78 #define BITS_PER_PIXEL (BYTES_PER_PIXEL * 8)
80 #define RED_SHIFT 16
81 #define GREEN_SHIFT 8
82 #define BLUE_SHIFT 0
84 #define PALETTE_ENTRIES_NO 16 /* passed to fb_alloc_cmap() */
86 /* ML300/403 reference design framebuffer driver platform data struct */
87 struct xilinxfb_platform_data {
88 u32 rotate_screen; /* Flag to rotate display 180 degrees */
89 u32 screen_height_mm; /* Physical dimensions of screen in mm */
90 u32 screen_width_mm;
91 u32 xres, yres; /* resolution of screen in pixels */
92 u32 xvirt, yvirt; /* resolution of memory buffer */
94 /* Physical address of framebuffer memory; If non-zero, driver
95 * will use provided memory address instead of allocating one from
96 * the consistent pool. */
97 u32 fb_phys;
101 * Default xilinxfb configuration
103 static struct xilinxfb_platform_data xilinx_fb_default_pdata = {
104 .xres = 640,
105 .yres = 480,
106 .xvirt = 1024,
107 .yvirt = 480,
111 * Here are the default fb_fix_screeninfo and fb_var_screeninfo structures
113 static struct fb_fix_screeninfo xilinx_fb_fix = {
114 .id = "Xilinx",
115 .type = FB_TYPE_PACKED_PIXELS,
116 .visual = FB_VISUAL_TRUECOLOR,
117 .accel = FB_ACCEL_NONE
120 static struct fb_var_screeninfo xilinx_fb_var = {
121 .bits_per_pixel = BITS_PER_PIXEL,
123 .red = { RED_SHIFT, 8, 0 },
124 .green = { GREEN_SHIFT, 8, 0 },
125 .blue = { BLUE_SHIFT, 8, 0 },
126 .transp = { 0, 0, 0 },
128 .activate = FB_ACTIVATE_NOW
132 #define BUS_ACCESS_FLAG 0x1 /* 1 = BUS, 0 = DCR */
133 #define LITTLE_ENDIAN_ACCESS 0x2 /* LITTLE ENDIAN IO functions */
135 struct xilinxfb_drvdata {
137 struct fb_info info; /* FB driver info record */
139 phys_addr_t regs_phys; /* phys. address of the control
140 registers */
141 void __iomem *regs; /* virt. address of the control
142 registers */
143 #ifdef CONFIG_PPC_DCR
144 dcr_host_t dcr_host;
145 unsigned int dcr_len;
146 #endif
147 void *fb_virt; /* virt. address of the frame buffer */
148 dma_addr_t fb_phys; /* phys. address of the frame buffer */
149 int fb_alloced; /* Flag, was the fb memory alloced? */
151 u8 flags; /* features of the driver */
153 u32 reg_ctrl_default;
155 u32 pseudo_palette[PALETTE_ENTRIES_NO];
156 /* Fake palette of 16 colors */
159 #define to_xilinxfb_drvdata(_info) \
160 container_of(_info, struct xilinxfb_drvdata, info)
163 * The XPS TFT Controller can be accessed through BUS or DCR interface.
164 * To perform the read/write on the registers we need to check on
165 * which bus its connected and call the appropriate write API.
167 static void xilinx_fb_out32(struct xilinxfb_drvdata *drvdata, u32 offset,
168 u32 val)
170 if (drvdata->flags & BUS_ACCESS_FLAG) {
171 if (drvdata->flags & LITTLE_ENDIAN_ACCESS)
172 iowrite32(val, drvdata->regs + (offset << 2));
173 else
174 iowrite32be(val, drvdata->regs + (offset << 2));
176 #ifdef CONFIG_PPC_DCR
177 else
178 dcr_write(drvdata->dcr_host, offset, val);
179 #endif
182 static u32 xilinx_fb_in32(struct xilinxfb_drvdata *drvdata, u32 offset)
184 if (drvdata->flags & BUS_ACCESS_FLAG) {
185 if (drvdata->flags & LITTLE_ENDIAN_ACCESS)
186 return ioread32(drvdata->regs + (offset << 2));
187 else
188 return ioread32be(drvdata->regs + (offset << 2));
190 #ifdef CONFIG_PPC_DCR
191 else
192 return dcr_read(drvdata->dcr_host, offset);
193 #endif
194 return 0;
197 static int
198 xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
199 unsigned transp, struct fb_info *fbi)
201 u32 *palette = fbi->pseudo_palette;
203 if (regno >= PALETTE_ENTRIES_NO)
204 return -EINVAL;
206 if (fbi->var.grayscale) {
207 /* Convert color to grayscale.
208 * grayscale = 0.30*R + 0.59*G + 0.11*B */
209 red = green = blue =
210 (red * 77 + green * 151 + blue * 28 + 127) >> 8;
213 /* fbi->fix.visual is always FB_VISUAL_TRUECOLOR */
215 /* We only handle 8 bits of each color. */
216 red >>= 8;
217 green >>= 8;
218 blue >>= 8;
219 palette[regno] = (red << RED_SHIFT) | (green << GREEN_SHIFT) |
220 (blue << BLUE_SHIFT);
222 return 0;
225 static int
226 xilinx_fb_blank(int blank_mode, struct fb_info *fbi)
228 struct xilinxfb_drvdata *drvdata = to_xilinxfb_drvdata(fbi);
230 switch (blank_mode) {
231 case FB_BLANK_UNBLANK:
232 /* turn on panel */
233 xilinx_fb_out32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
234 break;
236 case FB_BLANK_NORMAL:
237 case FB_BLANK_VSYNC_SUSPEND:
238 case FB_BLANK_HSYNC_SUSPEND:
239 case FB_BLANK_POWERDOWN:
240 /* turn off panel */
241 xilinx_fb_out32(drvdata, REG_CTRL, 0);
242 default:
243 break;
246 return 0; /* success */
249 static struct fb_ops xilinxfb_ops =
251 .owner = THIS_MODULE,
252 .fb_setcolreg = xilinx_fb_setcolreg,
253 .fb_blank = xilinx_fb_blank,
254 .fb_fillrect = cfb_fillrect,
255 .fb_copyarea = cfb_copyarea,
256 .fb_imageblit = cfb_imageblit,
259 /* ---------------------------------------------------------------------
260 * Bus independent setup/teardown
263 static int xilinxfb_assign(struct platform_device *pdev,
264 struct xilinxfb_drvdata *drvdata,
265 struct xilinxfb_platform_data *pdata)
267 int rc;
268 struct device *dev = &pdev->dev;
269 int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL;
271 if (drvdata->flags & BUS_ACCESS_FLAG) {
272 struct resource *res;
274 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
275 drvdata->regs = devm_ioremap_resource(&pdev->dev, res);
276 if (IS_ERR(drvdata->regs))
277 return PTR_ERR(drvdata->regs);
279 drvdata->regs_phys = res->start;
282 /* Allocate the framebuffer memory */
283 if (pdata->fb_phys) {
284 drvdata->fb_phys = pdata->fb_phys;
285 drvdata->fb_virt = ioremap(pdata->fb_phys, fbsize);
286 } else {
287 drvdata->fb_alloced = 1;
288 drvdata->fb_virt = dma_alloc_coherent(dev, PAGE_ALIGN(fbsize),
289 &drvdata->fb_phys, GFP_KERNEL);
292 if (!drvdata->fb_virt) {
293 dev_err(dev, "Could not allocate frame buffer memory\n");
294 return -ENOMEM;
297 /* Clear (turn to black) the framebuffer */
298 memset_io((void __iomem *)drvdata->fb_virt, 0, fbsize);
300 /* Tell the hardware where the frame buffer is */
301 xilinx_fb_out32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
302 rc = xilinx_fb_in32(drvdata, REG_FB_ADDR);
303 /* Endianess detection */
304 if (rc != drvdata->fb_phys) {
305 drvdata->flags |= LITTLE_ENDIAN_ACCESS;
306 xilinx_fb_out32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
309 /* Turn on the display */
310 drvdata->reg_ctrl_default = REG_CTRL_ENABLE;
311 if (pdata->rotate_screen)
312 drvdata->reg_ctrl_default |= REG_CTRL_ROTATE;
313 xilinx_fb_out32(drvdata, REG_CTRL,
314 drvdata->reg_ctrl_default);
316 /* Fill struct fb_info */
317 drvdata->info.device = dev;
318 drvdata->info.screen_base = (void __iomem *)drvdata->fb_virt;
319 drvdata->info.fbops = &xilinxfb_ops;
320 drvdata->info.fix = xilinx_fb_fix;
321 drvdata->info.fix.smem_start = drvdata->fb_phys;
322 drvdata->info.fix.smem_len = fbsize;
323 drvdata->info.fix.line_length = pdata->xvirt * BYTES_PER_PIXEL;
325 drvdata->info.pseudo_palette = drvdata->pseudo_palette;
326 drvdata->info.flags = FBINFO_DEFAULT;
327 drvdata->info.var = xilinx_fb_var;
328 drvdata->info.var.height = pdata->screen_height_mm;
329 drvdata->info.var.width = pdata->screen_width_mm;
330 drvdata->info.var.xres = pdata->xres;
331 drvdata->info.var.yres = pdata->yres;
332 drvdata->info.var.xres_virtual = pdata->xvirt;
333 drvdata->info.var.yres_virtual = pdata->yvirt;
335 /* Allocate a colour map */
336 rc = fb_alloc_cmap(&drvdata->info.cmap, PALETTE_ENTRIES_NO, 0);
337 if (rc) {
338 dev_err(dev, "Fail to allocate colormap (%d entries)\n",
339 PALETTE_ENTRIES_NO);
340 goto err_cmap;
343 /* Register new frame buffer */
344 rc = register_framebuffer(&drvdata->info);
345 if (rc) {
346 dev_err(dev, "Could not register frame buffer\n");
347 goto err_regfb;
350 if (drvdata->flags & BUS_ACCESS_FLAG) {
351 /* Put a banner in the log (for DEBUG) */
352 dev_dbg(dev, "regs: phys=%pa, virt=%p\n",
353 &drvdata->regs_phys, drvdata->regs);
355 /* Put a banner in the log (for DEBUG) */
356 dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
357 (unsigned long long)drvdata->fb_phys, drvdata->fb_virt, fbsize);
359 return 0; /* success */
361 err_regfb:
362 fb_dealloc_cmap(&drvdata->info.cmap);
364 err_cmap:
365 if (drvdata->fb_alloced)
366 dma_free_coherent(dev, PAGE_ALIGN(fbsize), drvdata->fb_virt,
367 drvdata->fb_phys);
368 else
369 iounmap(drvdata->fb_virt);
371 /* Turn off the display */
372 xilinx_fb_out32(drvdata, REG_CTRL, 0);
374 return rc;
377 static int xilinxfb_release(struct device *dev)
379 struct xilinxfb_drvdata *drvdata = dev_get_drvdata(dev);
381 #if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
382 xilinx_fb_blank(VESA_POWERDOWN, &drvdata->info);
383 #endif
385 unregister_framebuffer(&drvdata->info);
387 fb_dealloc_cmap(&drvdata->info.cmap);
389 if (drvdata->fb_alloced)
390 dma_free_coherent(dev, PAGE_ALIGN(drvdata->info.fix.smem_len),
391 drvdata->fb_virt, drvdata->fb_phys);
392 else
393 iounmap(drvdata->fb_virt);
395 /* Turn off the display */
396 xilinx_fb_out32(drvdata, REG_CTRL, 0);
398 #ifdef CONFIG_PPC_DCR
399 /* Release the resources, as allocated based on interface */
400 if (!(drvdata->flags & BUS_ACCESS_FLAG))
401 dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
402 #endif
404 return 0;
407 /* ---------------------------------------------------------------------
408 * OF bus binding
411 static int xilinxfb_of_probe(struct platform_device *pdev)
413 const u32 *prop;
414 u32 tft_access = 0;
415 struct xilinxfb_platform_data pdata;
416 int size;
417 struct xilinxfb_drvdata *drvdata;
419 /* Copy with the default pdata (not a ptr reference!) */
420 pdata = xilinx_fb_default_pdata;
422 /* Allocate the driver data region */
423 drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
424 if (!drvdata)
425 return -ENOMEM;
428 * To check whether the core is connected directly to DCR or BUS
429 * interface and initialize the tft_access accordingly.
431 of_property_read_u32(pdev->dev.of_node, "xlnx,dcr-splb-slave-if",
432 &tft_access);
435 * Fill the resource structure if its direct BUS interface
436 * otherwise fill the dcr_host structure.
438 if (tft_access) {
439 drvdata->flags |= BUS_ACCESS_FLAG;
441 #ifdef CONFIG_PPC_DCR
442 else {
443 int start;
444 start = dcr_resource_start(pdev->dev.of_node, 0);
445 drvdata->dcr_len = dcr_resource_len(pdev->dev.of_node, 0);
446 drvdata->dcr_host = dcr_map(pdev->dev.of_node, start, drvdata->dcr_len);
447 if (!DCR_MAP_OK(drvdata->dcr_host)) {
448 dev_err(&pdev->dev, "invalid DCR address\n");
449 return -ENODEV;
452 #endif
454 prop = of_get_property(pdev->dev.of_node, "phys-size", &size);
455 if ((prop) && (size >= sizeof(u32)*2)) {
456 pdata.screen_width_mm = prop[0];
457 pdata.screen_height_mm = prop[1];
460 prop = of_get_property(pdev->dev.of_node, "resolution", &size);
461 if ((prop) && (size >= sizeof(u32)*2)) {
462 pdata.xres = prop[0];
463 pdata.yres = prop[1];
466 prop = of_get_property(pdev->dev.of_node, "virtual-resolution", &size);
467 if ((prop) && (size >= sizeof(u32)*2)) {
468 pdata.xvirt = prop[0];
469 pdata.yvirt = prop[1];
472 if (of_find_property(pdev->dev.of_node, "rotate-display", NULL))
473 pdata.rotate_screen = 1;
475 dev_set_drvdata(&pdev->dev, drvdata);
476 return xilinxfb_assign(pdev, drvdata, &pdata);
479 static int xilinxfb_of_remove(struct platform_device *op)
481 return xilinxfb_release(&op->dev);
484 /* Match table for of_platform binding */
485 static struct of_device_id xilinxfb_of_match[] = {
486 { .compatible = "xlnx,xps-tft-1.00.a", },
487 { .compatible = "xlnx,xps-tft-2.00.a", },
488 { .compatible = "xlnx,xps-tft-2.01.a", },
489 { .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", },
490 { .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", },
493 MODULE_DEVICE_TABLE(of, xilinxfb_of_match);
495 static struct platform_driver xilinxfb_of_driver = {
496 .probe = xilinxfb_of_probe,
497 .remove = xilinxfb_of_remove,
498 .driver = {
499 .name = DRIVER_NAME,
500 .of_match_table = xilinxfb_of_match,
504 module_platform_driver(xilinxfb_of_driver);
506 MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
507 MODULE_DESCRIPTION("Xilinx TFT frame buffer driver");
508 MODULE_LICENSE("GPL");