sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / kernel / irq / spurious.c
blob5707f97a3e6ac50954f8d407d5a4aadcaa2b96fc
1 /*
2 * linux/kernel/irq/spurious.c
4 * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar
6 * This file contains spurious interrupt handling.
7 */
9 #include <linux/jiffies.h>
10 #include <linux/irq.h>
11 #include <linux/module.h>
12 #include <linux/kallsyms.h>
13 #include <linux/interrupt.h>
14 #include <linux/moduleparam.h>
15 #include <linux/timer.h>
17 #include "internals.h"
19 static int irqfixup __read_mostly;
21 #define POLL_SPURIOUS_IRQ_INTERVAL (HZ/10)
22 static void poll_spurious_irqs(unsigned long dummy);
23 static DEFINE_TIMER(poll_spurious_irq_timer, poll_spurious_irqs, 0, 0);
24 static int irq_poll_cpu;
25 static atomic_t irq_poll_active;
28 * We wait here for a poller to finish.
30 * If the poll runs on this CPU, then we yell loudly and return
31 * false. That will leave the interrupt line disabled in the worst
32 * case, but it should never happen.
34 * We wait until the poller is done and then recheck disabled and
35 * action (about to be disabled). Only if it's still active, we return
36 * true and let the handler run.
38 bool irq_wait_for_poll(struct irq_desc *desc)
40 if (WARN_ONCE(irq_poll_cpu == smp_processor_id(),
41 "irq poll in progress on cpu %d for irq %d\n",
42 smp_processor_id(), desc->irq_data.irq))
43 return false;
45 #ifdef CONFIG_SMP
46 do {
47 raw_spin_unlock(&desc->lock);
48 while (irqd_irq_inprogress(&desc->irq_data))
49 cpu_relax();
50 raw_spin_lock(&desc->lock);
51 } while (irqd_irq_inprogress(&desc->irq_data));
52 /* Might have been disabled in meantime */
53 return !irqd_irq_disabled(&desc->irq_data) && desc->action;
54 #else
55 return false;
56 #endif
61 * Recovery handler for misrouted interrupts.
63 static int try_one_irq(struct irq_desc *desc, bool force)
65 irqreturn_t ret = IRQ_NONE;
66 struct irqaction *action;
68 raw_spin_lock(&desc->lock);
71 * PER_CPU, nested thread interrupts and interrupts explicitely
72 * marked polled are excluded from polling.
74 if (irq_settings_is_per_cpu(desc) ||
75 irq_settings_is_nested_thread(desc) ||
76 irq_settings_is_polled(desc))
77 goto out;
80 * Do not poll disabled interrupts unless the spurious
81 * disabled poller asks explicitely.
83 if (irqd_irq_disabled(&desc->irq_data) && !force)
84 goto out;
87 * All handlers must agree on IRQF_SHARED, so we test just the
88 * first.
90 action = desc->action;
91 if (!action || !(action->flags & IRQF_SHARED) ||
92 (action->flags & __IRQF_TIMER))
93 goto out;
95 /* Already running on another processor */
96 if (irqd_irq_inprogress(&desc->irq_data)) {
98 * Already running: If it is shared get the other
99 * CPU to go looking for our mystery interrupt too
101 desc->istate |= IRQS_PENDING;
102 goto out;
105 /* Mark it poll in progress */
106 desc->istate |= IRQS_POLL_INPROGRESS;
107 do {
108 if (handle_irq_event(desc) == IRQ_HANDLED)
109 ret = IRQ_HANDLED;
110 /* Make sure that there is still a valid action */
111 action = desc->action;
112 } while ((desc->istate & IRQS_PENDING) && action);
113 desc->istate &= ~IRQS_POLL_INPROGRESS;
114 out:
115 raw_spin_unlock(&desc->lock);
116 return ret == IRQ_HANDLED;
119 static int misrouted_irq(int irq)
121 struct irq_desc *desc;
122 int i, ok = 0;
124 if (atomic_inc_return(&irq_poll_active) != 1)
125 goto out;
127 irq_poll_cpu = smp_processor_id();
129 for_each_irq_desc(i, desc) {
130 if (!i)
131 continue;
133 if (i == irq) /* Already tried */
134 continue;
136 if (try_one_irq(desc, false))
137 ok = 1;
139 out:
140 atomic_dec(&irq_poll_active);
141 /* So the caller can adjust the irq error counts */
142 return ok;
145 static void poll_spurious_irqs(unsigned long dummy)
147 struct irq_desc *desc;
148 int i;
150 if (atomic_inc_return(&irq_poll_active) != 1)
151 goto out;
152 irq_poll_cpu = smp_processor_id();
154 for_each_irq_desc(i, desc) {
155 unsigned int state;
157 if (!i)
158 continue;
160 /* Racy but it doesn't matter */
161 state = desc->istate;
162 barrier();
163 if (!(state & IRQS_SPURIOUS_DISABLED))
164 continue;
166 local_irq_disable();
167 try_one_irq(desc, true);
168 local_irq_enable();
170 out:
171 atomic_dec(&irq_poll_active);
172 mod_timer(&poll_spurious_irq_timer,
173 jiffies + POLL_SPURIOUS_IRQ_INTERVAL);
176 static inline int bad_action_ret(irqreturn_t action_ret)
178 if (likely(action_ret <= (IRQ_HANDLED | IRQ_WAKE_THREAD)))
179 return 0;
180 return 1;
184 * If 99,900 of the previous 100,000 interrupts have not been handled
185 * then assume that the IRQ is stuck in some manner. Drop a diagnostic
186 * and try to turn the IRQ off.
188 * (The other 100-of-100,000 interrupts may have been a correctly
189 * functioning device sharing an IRQ with the failing one)
191 static void __report_bad_irq(struct irq_desc *desc, irqreturn_t action_ret)
193 unsigned int irq = irq_desc_get_irq(desc);
194 struct irqaction *action;
195 unsigned long flags;
197 if (bad_action_ret(action_ret)) {
198 printk(KERN_ERR "irq event %d: bogus return value %x\n",
199 irq, action_ret);
200 } else {
201 printk(KERN_ERR "irq %d: nobody cared (try booting with "
202 "the \"irqpoll\" option)\n", irq);
204 dump_stack();
205 printk(KERN_ERR "handlers:\n");
208 * We need to take desc->lock here. note_interrupt() is called
209 * w/o desc->lock held, but IRQ_PROGRESS set. We might race
210 * with something else removing an action. It's ok to take
211 * desc->lock here. See synchronize_irq().
213 raw_spin_lock_irqsave(&desc->lock, flags);
214 for_each_action_of_desc(desc, action) {
215 printk(KERN_ERR "[<%p>] %pf", action->handler, action->handler);
216 if (action->thread_fn)
217 printk(KERN_CONT " threaded [<%p>] %pf",
218 action->thread_fn, action->thread_fn);
219 printk(KERN_CONT "\n");
221 raw_spin_unlock_irqrestore(&desc->lock, flags);
224 static void report_bad_irq(struct irq_desc *desc, irqreturn_t action_ret)
226 static int count = 100;
228 if (count > 0) {
229 count--;
230 __report_bad_irq(desc, action_ret);
234 static inline int
235 try_misrouted_irq(unsigned int irq, struct irq_desc *desc,
236 irqreturn_t action_ret)
238 struct irqaction *action;
240 if (!irqfixup)
241 return 0;
243 /* We didn't actually handle the IRQ - see if it was misrouted? */
244 if (action_ret == IRQ_NONE)
245 return 1;
248 * But for 'irqfixup == 2' we also do it for handled interrupts if
249 * they are marked as IRQF_IRQPOLL (or for irq zero, which is the
250 * traditional PC timer interrupt.. Legacy)
252 if (irqfixup < 2)
253 return 0;
255 if (!irq)
256 return 1;
259 * Since we don't get the descriptor lock, "action" can
260 * change under us. We don't really care, but we don't
261 * want to follow a NULL pointer. So tell the compiler to
262 * just load it once by using a barrier.
264 action = desc->action;
265 barrier();
266 return action && (action->flags & IRQF_IRQPOLL);
269 #define SPURIOUS_DEFERRED 0x80000000
271 void note_interrupt(struct irq_desc *desc, irqreturn_t action_ret)
273 unsigned int irq;
275 if (desc->istate & IRQS_POLL_INPROGRESS ||
276 irq_settings_is_polled(desc))
277 return;
279 if (bad_action_ret(action_ret)) {
280 report_bad_irq(desc, action_ret);
281 return;
285 * We cannot call note_interrupt from the threaded handler
286 * because we need to look at the compound of all handlers
287 * (primary and threaded). Aside of that in the threaded
288 * shared case we have no serialization against an incoming
289 * hardware interrupt while we are dealing with a threaded
290 * result.
292 * So in case a thread is woken, we just note the fact and
293 * defer the analysis to the next hardware interrupt.
295 * The threaded handlers store whether they sucessfully
296 * handled an interrupt and we check whether that number
297 * changed versus the last invocation.
299 * We could handle all interrupts with the delayed by one
300 * mechanism, but for the non forced threaded case we'd just
301 * add pointless overhead to the straight hardirq interrupts
302 * for the sake of a few lines less code.
304 if (action_ret & IRQ_WAKE_THREAD) {
306 * There is a thread woken. Check whether one of the
307 * shared primary handlers returned IRQ_HANDLED. If
308 * not we defer the spurious detection to the next
309 * interrupt.
311 if (action_ret == IRQ_WAKE_THREAD) {
312 int handled;
314 * We use bit 31 of thread_handled_last to
315 * denote the deferred spurious detection
316 * active. No locking necessary as
317 * thread_handled_last is only accessed here
318 * and we have the guarantee that hard
319 * interrupts are not reentrant.
321 if (!(desc->threads_handled_last & SPURIOUS_DEFERRED)) {
322 desc->threads_handled_last |= SPURIOUS_DEFERRED;
323 return;
326 * Check whether one of the threaded handlers
327 * returned IRQ_HANDLED since the last
328 * interrupt happened.
330 * For simplicity we just set bit 31, as it is
331 * set in threads_handled_last as well. So we
332 * avoid extra masking. And we really do not
333 * care about the high bits of the handled
334 * count. We just care about the count being
335 * different than the one we saw before.
337 handled = atomic_read(&desc->threads_handled);
338 handled |= SPURIOUS_DEFERRED;
339 if (handled != desc->threads_handled_last) {
340 action_ret = IRQ_HANDLED;
342 * Note: We keep the SPURIOUS_DEFERRED
343 * bit set. We are handling the
344 * previous invocation right now.
345 * Keep it for the current one, so the
346 * next hardware interrupt will
347 * account for it.
349 desc->threads_handled_last = handled;
350 } else {
352 * None of the threaded handlers felt
353 * responsible for the last interrupt
355 * We keep the SPURIOUS_DEFERRED bit
356 * set in threads_handled_last as we
357 * need to account for the current
358 * interrupt as well.
360 action_ret = IRQ_NONE;
362 } else {
364 * One of the primary handlers returned
365 * IRQ_HANDLED. So we don't care about the
366 * threaded handlers on the same line. Clear
367 * the deferred detection bit.
369 * In theory we could/should check whether the
370 * deferred bit is set and take the result of
371 * the previous run into account here as
372 * well. But it's really not worth the
373 * trouble. If every other interrupt is
374 * handled we never trigger the spurious
375 * detector. And if this is just the one out
376 * of 100k unhandled ones which is handled
377 * then we merily delay the spurious detection
378 * by one hard interrupt. Not a real problem.
380 desc->threads_handled_last &= ~SPURIOUS_DEFERRED;
384 if (unlikely(action_ret == IRQ_NONE)) {
386 * If we are seeing only the odd spurious IRQ caused by
387 * bus asynchronicity then don't eventually trigger an error,
388 * otherwise the counter becomes a doomsday timer for otherwise
389 * working systems
391 if (time_after(jiffies, desc->last_unhandled + HZ/10))
392 desc->irqs_unhandled = 1;
393 else
394 desc->irqs_unhandled++;
395 desc->last_unhandled = jiffies;
398 irq = irq_desc_get_irq(desc);
399 if (unlikely(try_misrouted_irq(irq, desc, action_ret))) {
400 int ok = misrouted_irq(irq);
401 if (action_ret == IRQ_NONE)
402 desc->irqs_unhandled -= ok;
405 desc->irq_count++;
406 if (likely(desc->irq_count < 100000))
407 return;
409 desc->irq_count = 0;
410 if (unlikely(desc->irqs_unhandled > 99900)) {
412 * The interrupt is stuck
414 __report_bad_irq(desc, action_ret);
416 * Now kill the IRQ
418 printk(KERN_EMERG "Disabling IRQ #%d\n", irq);
419 desc->istate |= IRQS_SPURIOUS_DISABLED;
420 desc->depth++;
421 irq_disable(desc);
423 mod_timer(&poll_spurious_irq_timer,
424 jiffies + POLL_SPURIOUS_IRQ_INTERVAL);
426 desc->irqs_unhandled = 0;
429 bool noirqdebug __read_mostly;
431 int noirqdebug_setup(char *str)
433 noirqdebug = 1;
434 printk(KERN_INFO "IRQ lockup detection disabled\n");
436 return 1;
439 __setup("noirqdebug", noirqdebug_setup);
440 module_param(noirqdebug, bool, 0644);
441 MODULE_PARM_DESC(noirqdebug, "Disable irq lockup detection when true");
443 static int __init irqfixup_setup(char *str)
445 irqfixup = 1;
446 printk(KERN_WARNING "Misrouted IRQ fixup support enabled.\n");
447 printk(KERN_WARNING "This may impact system performance.\n");
449 return 1;
452 __setup("irqfixup", irqfixup_setup);
453 module_param(irqfixup, int, 0644);
455 static int __init irqpoll_setup(char *str)
457 irqfixup = 2;
458 printk(KERN_WARNING "Misrouted IRQ fixup and polling support "
459 "enabled\n");
460 printk(KERN_WARNING "This may significantly impact system "
461 "performance\n");
462 return 1;
465 __setup("irqpoll", irqpoll_setup);