sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / sound / soc / pxa / e800_wm9712.c
blob07b9c6e17df95591644770f8bfbc134ae055b388
1 /*
2 * e800-wm9712.c -- SoC audio for e800
4 * Copyright 2007 (c) Ian Molton <spyro@f2s.com>
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; version 2 ONLY.
12 #include <linux/module.h>
13 #include <linux/moduleparam.h>
14 #include <linux/gpio.h>
16 #include <sound/core.h>
17 #include <sound/pcm.h>
18 #include <sound/soc.h>
20 #include <asm/mach-types.h>
21 #include <mach/audio.h>
22 #include <mach/eseries-gpio.h>
24 #include "pxa2xx-ac97.h"
26 static int e800_spk_amp_event(struct snd_soc_dapm_widget *w,
27 struct snd_kcontrol *kcontrol, int event)
29 if (event & SND_SOC_DAPM_PRE_PMU)
30 gpio_set_value(GPIO_E800_SPK_AMP_ON, 1);
31 else if (event & SND_SOC_DAPM_POST_PMD)
32 gpio_set_value(GPIO_E800_SPK_AMP_ON, 0);
34 return 0;
37 static int e800_hp_amp_event(struct snd_soc_dapm_widget *w,
38 struct snd_kcontrol *kcontrol, int event)
40 if (event & SND_SOC_DAPM_PRE_PMU)
41 gpio_set_value(GPIO_E800_HP_AMP_OFF, 0);
42 else if (event & SND_SOC_DAPM_POST_PMD)
43 gpio_set_value(GPIO_E800_HP_AMP_OFF, 1);
45 return 0;
48 static const struct snd_soc_dapm_widget e800_dapm_widgets[] = {
49 SND_SOC_DAPM_HP("Headphone Jack", NULL),
50 SND_SOC_DAPM_MIC("Mic (Internal1)", NULL),
51 SND_SOC_DAPM_MIC("Mic (Internal2)", NULL),
52 SND_SOC_DAPM_SPK("Speaker", NULL),
53 SND_SOC_DAPM_PGA_E("Headphone Amp", SND_SOC_NOPM, 0, 0, NULL, 0,
54 e800_hp_amp_event, SND_SOC_DAPM_PRE_PMU |
55 SND_SOC_DAPM_POST_PMD),
56 SND_SOC_DAPM_PGA_E("Speaker Amp", SND_SOC_NOPM, 0, 0, NULL, 0,
57 e800_spk_amp_event, SND_SOC_DAPM_PRE_PMU |
58 SND_SOC_DAPM_POST_PMD),
61 static const struct snd_soc_dapm_route audio_map[] = {
62 {"Headphone Jack", NULL, "HPOUTL"},
63 {"Headphone Jack", NULL, "HPOUTR"},
64 {"Headphone Jack", NULL, "Headphone Amp"},
66 {"Speaker Amp", NULL, "MONOOUT"},
67 {"Speaker", NULL, "Speaker Amp"},
69 {"MIC1", NULL, "Mic (Internal1)"},
70 {"MIC2", NULL, "Mic (Internal2)"},
73 static struct snd_soc_dai_link e800_dai[] = {
75 .name = "AC97",
76 .stream_name = "AC97 HiFi",
77 .cpu_dai_name = "pxa2xx-ac97",
78 .codec_dai_name = "wm9712-hifi",
79 .platform_name = "pxa-pcm-audio",
80 .codec_name = "wm9712-codec",
83 .name = "AC97 Aux",
84 .stream_name = "AC97 Aux",
85 .cpu_dai_name = "pxa2xx-ac97-aux",
86 .codec_dai_name ="wm9712-aux",
87 .platform_name = "pxa-pcm-audio",
88 .codec_name = "wm9712-codec",
92 static struct snd_soc_card e800 = {
93 .name = "Toshiba e800",
94 .owner = THIS_MODULE,
95 .dai_link = e800_dai,
96 .num_links = ARRAY_SIZE(e800_dai),
98 .dapm_widgets = e800_dapm_widgets,
99 .num_dapm_widgets = ARRAY_SIZE(e800_dapm_widgets),
100 .dapm_routes = audio_map,
101 .num_dapm_routes = ARRAY_SIZE(audio_map),
104 static struct gpio e800_audio_gpios[] = {
105 { GPIO_E800_SPK_AMP_ON, GPIOF_OUT_INIT_HIGH, "Headphone amp" },
106 { GPIO_E800_HP_AMP_OFF, GPIOF_OUT_INIT_HIGH, "Speaker amp" },
109 static int e800_probe(struct platform_device *pdev)
111 struct snd_soc_card *card = &e800;
112 int ret;
114 ret = gpio_request_array(e800_audio_gpios,
115 ARRAY_SIZE(e800_audio_gpios));
116 if (ret)
117 return ret;
119 card->dev = &pdev->dev;
121 ret = devm_snd_soc_register_card(&pdev->dev, card);
122 if (ret) {
123 dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
124 ret);
125 gpio_free_array(e800_audio_gpios, ARRAY_SIZE(e800_audio_gpios));
127 return ret;
130 static int e800_remove(struct platform_device *pdev)
132 gpio_free_array(e800_audio_gpios, ARRAY_SIZE(e800_audio_gpios));
133 return 0;
136 static struct platform_driver e800_driver = {
137 .driver = {
138 .name = "e800-audio",
139 .pm = &snd_soc_pm_ops,
141 .probe = e800_probe,
142 .remove = e800_remove,
145 module_platform_driver(e800_driver);
147 /* Module information */
148 MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
149 MODULE_DESCRIPTION("ALSA SoC driver for e800");
150 MODULE_LICENSE("GPL v2");
151 MODULE_ALIAS("platform:e800-audio");