?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
powerpc/eeh: Output error number
[linux/fpc-iii.git] / arch / powerpc / platforms / powernv / eeh-ioda.c
blobf426f4c24fb62a39dbb6297bf6c5905d5de1394c
1 /*
2 * The file intends to implement the functions needed by EEH, which is
3 * built on IODA compliant chip. Actually, lots of functions related
4 * to EEH would be built based on the OPAL APIs.
5 *
6 * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2013.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 */
13
14 #include <linux/bootmem.h>
15 #include <linux/debugfs.h>
16 #include <linux/delay.h>
17 #include <linux/init.h>
18 #include <linux/io.h>
19 #include <linux/irq.h>
20 #include <linux/kernel.h>
21 #include <linux/msi.h>
22 #include <linux/notifier.h>
23 #include <linux/pci.h>
24 #include <linux/string.h>
25
26 #include <asm/eeh.h>
27 #include <asm/eeh_event.h>
28 #include <asm/io.h>
29 #include <asm/iommu.h>
30 #include <asm/msi_bitmap.h>
31 #include <asm/opal.h>
32 #include <asm/pci-bridge.h>
33 #include <asm/ppc-pci.h>
34 #include <asm/tce.h>
35
36 #include "powernv.h"
37 #include "pci.h"
38
39 static char *hub_diag = NULL;
40 static int ioda_eeh_nb_init = 0;
41
42 static int ioda_eeh_event(struct notifier_block *nb,
43 unsigned long events, void *change)
44 {
45 uint64_t changed_evts = (uint64_t)change;
46
47 /* We simply send special EEH event */
48 if ((changed_evts & OPAL_EVENT_PCI_ERROR) &&
49 (events & OPAL_EVENT_PCI_ERROR))
50 eeh_send_failure_event(NULL);
51
52 return 0;
53 }
54
55 static struct notifier_block ioda_eeh_nb = {
56 .notifier_call = ioda_eeh_event,
57 .next = NULL,
58 .priority = 0
59 };
60
61 #ifdef CONFIG_DEBUG_FS
62 static int ioda_eeh_dbgfs_set(void *data, int offset, u64 val)
63 {
64 struct pci_controller *hose = data;
65 struct pnv_phb *phb = hose->private_data;
66
67 out_be64(phb->regs + offset, val);
68 return 0;
69 }
70
71 static int ioda_eeh_dbgfs_get(void *data, int offset, u64 *val)
72 {
73 struct pci_controller *hose = data;
74 struct pnv_phb *phb = hose->private_data;
75
76 *val = in_be64(phb->regs + offset);
77 return 0;
78 }
79
80 static int ioda_eeh_outb_dbgfs_set(void *data, u64 val)
81 {
82 return ioda_eeh_dbgfs_set(data, 0xD10, val);
83 }
84
85 static int ioda_eeh_outb_dbgfs_get(void *data, u64 *val)
86 {
87 return ioda_eeh_dbgfs_get(data, 0xD10, val);
88 }
89
90 static int ioda_eeh_inbA_dbgfs_set(void *data, u64 val)
91 {
92 return ioda_eeh_dbgfs_set(data, 0xD90, val);
93 }
94
95 static int ioda_eeh_inbA_dbgfs_get(void *data, u64 *val)
96 {
97 return ioda_eeh_dbgfs_get(data, 0xD90, val);
98 }
99
100 static int ioda_eeh_inbB_dbgfs_set(void *data, u64 val)
101 {
102 return ioda_eeh_dbgfs_set(data, 0xE10, val);
103 }
104
105 static int ioda_eeh_inbB_dbgfs_get(void *data, u64 *val)
106 {
107 return ioda_eeh_dbgfs_get(data, 0xE10, val);
108 }
109
110 DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_outb_dbgfs_ops, ioda_eeh_outb_dbgfs_get,
111 ioda_eeh_outb_dbgfs_set, "0x%llx\n");
112 DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_inbA_dbgfs_ops, ioda_eeh_inbA_dbgfs_get,
113 ioda_eeh_inbA_dbgfs_set, "0x%llx\n");
114 DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_inbB_dbgfs_ops, ioda_eeh_inbB_dbgfs_get,
115 ioda_eeh_inbB_dbgfs_set, "0x%llx\n");
116 #endif /* CONFIG_DEBUG_FS */
117
118 /**
119 * ioda_eeh_post_init - Chip dependent post initialization
120 * @hose: PCI controller
121 *
122 * The function will be called after eeh PEs and devices
123 * have been built. That means the EEH is ready to supply
124 * service with I/O cache.
125 */
126 static int ioda_eeh_post_init(struct pci_controller *hose)
127 {
128 struct pnv_phb *phb = hose->private_data;
129 int ret;
130
131 /* Register OPAL event notifier */
132 if (!ioda_eeh_nb_init) {
133 ret = opal_notifier_register(&ioda_eeh_nb);
134 if (ret) {
135 pr_err("%s: Can't register OPAL event notifier (%d)\n",
136 __func__, ret);
137 return ret;
138 }
139
140 ioda_eeh_nb_init = 1;
141 }
142
143 /* We needn't HUB diag-data on PHB3 */
144 if (phb->type == PNV_PHB_IODA1 && !hub_diag) {
145 hub_diag = (char *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
146 if (!hub_diag) {
147 pr_err("%s: Out of memory !\n", __func__);
148 return -ENOMEM;
149 }
150 }
151
152 #ifdef CONFIG_DEBUG_FS
153 if (phb->dbgfs) {
154 debugfs_create_file("err_injct_outbound", 0600,
155 phb->dbgfs, hose,
156 &ioda_eeh_outb_dbgfs_ops);
157 debugfs_create_file("err_injct_inboundA", 0600,
158 phb->dbgfs, hose,
159 &ioda_eeh_inbA_dbgfs_ops);
160 debugfs_create_file("err_injct_inboundB", 0600,
161 phb->dbgfs, hose,
162 &ioda_eeh_inbB_dbgfs_ops);
163 }
164 #endif
165
166 phb->eeh_state |= PNV_EEH_STATE_ENABLED;
167
168 return 0;
169 }
170
171 /**
172 * ioda_eeh_set_option - Set EEH operation or I/O setting
173 * @pe: EEH PE
174 * @option: options
175 *
176 * Enable or disable EEH option for the indicated PE. The
177 * function also can be used to enable I/O or DMA for the
178 * PE.
179 */
180 static int ioda_eeh_set_option(struct eeh_pe *pe, int option)
181 {
182 s64 ret;
183 u32 pe_no;
184 struct pci_controller *hose = pe->phb;
185 struct pnv_phb *phb = hose->private_data;
186
187 /* Check on PE number */
188 if (pe->addr < 0 || pe->addr >= phb->ioda.total_pe) {
189 pr_err("%s: PE address %x out of range [0, %x] "
190 "on PHB#%x\n",
191 __func__, pe->addr, phb->ioda.total_pe,
192 hose->global_number);
193 return -EINVAL;
194 }
195
196 pe_no = pe->addr;
197 switch (option) {
198 case EEH_OPT_DISABLE:
199 ret = -EEXIST;
200 break;
201 case EEH_OPT_ENABLE:
202 ret = 0;
203 break;
204 case EEH_OPT_THAW_MMIO:
205 ret = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
206 OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO);
207 if (ret) {
208 pr_warning("%s: Failed to enable MMIO for "
209 "PHB#%x-PE#%x, err=%lld\n",
210 __func__, hose->global_number, pe_no, ret);
211 return -EIO;
212 }
213
214 break;
215 case EEH_OPT_THAW_DMA:
216 ret = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
217 OPAL_EEH_ACTION_CLEAR_FREEZE_DMA);
218 if (ret) {
219 pr_warning("%s: Failed to enable DMA for "
220 "PHB#%x-PE#%x, err=%lld\n",
221 __func__, hose->global_number, pe_no, ret);
222 return -EIO;
223 }
224
225 break;
226 default:
227 pr_warning("%s: Invalid option %d\n", __func__, option);
228 return -EINVAL;
229 }
230
231 return ret;
232 }
233
234 /**
235 * ioda_eeh_get_state - Retrieve the state of PE
236 * @pe: EEH PE
237 *
238 * The PE's state should be retrieved from the PEEV, PEST
239 * IODA tables. Since the OPAL has exported the function
240 * to do it, it'd better to use that.
241 */
242 static int ioda_eeh_get_state(struct eeh_pe *pe)
243 {
244 s64 ret = 0;
245 u8 fstate;
246 u16 pcierr;
247 u32 pe_no;
248 int result;
249 struct pci_controller *hose = pe->phb;
250 struct pnv_phb *phb = hose->private_data;
251
252 /*
253 * Sanity check on PE address. The PHB PE address should
254 * be zero.
255 */
256 if (pe->addr < 0 || pe->addr >= phb->ioda.total_pe) {
257 pr_err("%s: PE address %x out of range [0, %x] "
258 "on PHB#%x\n",
259 __func__, pe->addr, phb->ioda.total_pe,
260 hose->global_number);
261 return EEH_STATE_NOT_SUPPORT;
262 }
263
264 /* Retrieve PE status through OPAL */
265 pe_no = pe->addr;
266 ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no,
267 &fstate, &pcierr, NULL);
268 if (ret) {
269 pr_err("%s: Failed to get EEH status on "
270 "PHB#%x-PE#%x\n, err=%lld\n",
271 __func__, hose->global_number, pe_no, ret);
272 return EEH_STATE_NOT_SUPPORT;
273 }
274
275 /* Check PHB status */
276 if (pe->type & EEH_PE_PHB) {
277 result = 0;
278 result &= ~EEH_STATE_RESET_ACTIVE;
279
280 if (pcierr != OPAL_EEH_PHB_ERROR) {
281 result |= EEH_STATE_MMIO_ACTIVE;
282 result |= EEH_STATE_DMA_ACTIVE;
283 result |= EEH_STATE_MMIO_ENABLED;
284 result |= EEH_STATE_DMA_ENABLED;
285 }
286
287 return result;
288 }
289
290 /* Parse result out */
291 result = 0;
292 switch (fstate) {
293 case OPAL_EEH_STOPPED_NOT_FROZEN:
294 result &= ~EEH_STATE_RESET_ACTIVE;
295 result |= EEH_STATE_MMIO_ACTIVE;
296 result |= EEH_STATE_DMA_ACTIVE;
297 result |= EEH_STATE_MMIO_ENABLED;
298 result |= EEH_STATE_DMA_ENABLED;
299 break;
300 case OPAL_EEH_STOPPED_MMIO_FREEZE:
301 result &= ~EEH_STATE_RESET_ACTIVE;
302 result |= EEH_STATE_DMA_ACTIVE;
303 result |= EEH_STATE_DMA_ENABLED;
304 break;
305 case OPAL_EEH_STOPPED_DMA_FREEZE:
306 result &= ~EEH_STATE_RESET_ACTIVE;
307 result |= EEH_STATE_MMIO_ACTIVE;
308 result |= EEH_STATE_MMIO_ENABLED;
309 break;
310 case OPAL_EEH_STOPPED_MMIO_DMA_FREEZE:
311 result &= ~EEH_STATE_RESET_ACTIVE;
312 break;
313 case OPAL_EEH_STOPPED_RESET:
314 result |= EEH_STATE_RESET_ACTIVE;
315 break;
316 case OPAL_EEH_STOPPED_TEMP_UNAVAIL:
317 result |= EEH_STATE_UNAVAILABLE;
318 break;
319 case OPAL_EEH_STOPPED_PERM_UNAVAIL:
320 result |= EEH_STATE_NOT_SUPPORT;
321 break;
322 default:
323 pr_warning("%s: Unexpected EEH status 0x%x "
324 "on PHB#%x-PE#%x\n",
325 __func__, fstate, hose->global_number, pe_no);
326 }
327
328 return result;
329 }
330
331 static int ioda_eeh_pe_clear(struct eeh_pe *pe)
332 {
333 struct pci_controller *hose;
334 struct pnv_phb *phb;
335 u32 pe_no;
336 u8 fstate;
337 u16 pcierr;
338 s64 ret;
339
340 pe_no = pe->addr;
341 hose = pe->phb;
342 phb = pe->phb->private_data;
343
344 /* Clear the EEH error on the PE */
345 ret = opal_pci_eeh_freeze_clear(phb->opal_id,
346 pe_no, OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
347 if (ret) {
348 pr_err("%s: Failed to clear EEH error for "
349 "PHB#%x-PE#%x, err=%lld\n",
350 __func__, hose->global_number, pe_no, ret);
351 return -EIO;
352 }
353
354 /*
355 * Read the PE state back and verify that the frozen
356 * state has been removed.
357 */
358 ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no,
359 &fstate, &pcierr, NULL);
360 if (ret) {
361 pr_err("%s: Failed to get EEH status on "
362 "PHB#%x-PE#%x\n, err=%lld\n",
363 __func__, hose->global_number, pe_no, ret);
364 return -EIO;
365 }
366
367 if (fstate != OPAL_EEH_STOPPED_NOT_FROZEN) {
368 pr_err("%s: Frozen state not cleared on "
369 "PHB#%x-PE#%x, sts=%x\n",
370 __func__, hose->global_number, pe_no, fstate);
371 return -EIO;
372 }
373
374 return 0;
375 }
376
377 static s64 ioda_eeh_phb_poll(struct pnv_phb *phb)
378 {
379 s64 rc = OPAL_HARDWARE;
380
381 while (1) {
382 rc = opal_pci_poll(phb->opal_id);
383 if (rc <= 0)
384 break;
385
386 msleep(rc);
387 }
388
389 return rc;
390 }
391
392 static int ioda_eeh_phb_reset(struct pci_controller *hose, int option)
393 {
394 struct pnv_phb *phb = hose->private_data;
395 s64 rc = OPAL_HARDWARE;
396
397 pr_debug("%s: Reset PHB#%x, option=%d\n",
398 __func__, hose->global_number, option);
399
400 /* Issue PHB complete reset request */
401 if (option == EEH_RESET_FUNDAMENTAL ||
402 option == EEH_RESET_HOT)
403 rc = opal_pci_reset(phb->opal_id,
404 OPAL_PHB_COMPLETE,
405 OPAL_ASSERT_RESET);
406 else if (option == EEH_RESET_DEACTIVATE)
407 rc = opal_pci_reset(phb->opal_id,
408 OPAL_PHB_COMPLETE,
409 OPAL_DEASSERT_RESET);
410 if (rc < 0)
411 goto out;
412
413 /*
414 * Poll state of the PHB until the request is done
415 * successfully.
416 */
417 rc = ioda_eeh_phb_poll(phb);
418 out:
419 if (rc != OPAL_SUCCESS)
420 return -EIO;
421
422 return 0;
423 }
424
425 static int ioda_eeh_root_reset(struct pci_controller *hose, int option)
426 {
427 struct pnv_phb *phb = hose->private_data;
428 s64 rc = OPAL_SUCCESS;
429
430 pr_debug("%s: Reset PHB#%x, option=%d\n",
431 __func__, hose->global_number, option);
432
433 /*
434 * During the reset deassert time, we needn't care
435 * the reset scope because the firmware does nothing
436 * for fundamental or hot reset during deassert phase.
437 */
438 if (option == EEH_RESET_FUNDAMENTAL)
439 rc = opal_pci_reset(phb->opal_id,
440 OPAL_PCI_FUNDAMENTAL_RESET,
441 OPAL_ASSERT_RESET);
442 else if (option == EEH_RESET_HOT)
443 rc = opal_pci_reset(phb->opal_id,
444 OPAL_PCI_HOT_RESET,
445 OPAL_ASSERT_RESET);
446 else if (option == EEH_RESET_DEACTIVATE)
447 rc = opal_pci_reset(phb->opal_id,
448 OPAL_PCI_HOT_RESET,
449 OPAL_DEASSERT_RESET);
450 if (rc < 0)
451 goto out;
452
453 /* Poll state of the PHB until the request is done */
454 rc = ioda_eeh_phb_poll(phb);
455 out:
456 if (rc != OPAL_SUCCESS)
457 return -EIO;
458
459 return 0;
460 }
461
462 static int ioda_eeh_bridge_reset(struct pci_controller *hose,
463 struct pci_dev *dev, int option)
464 {
465 u16 ctrl;
466
467 pr_debug("%s: Reset device %04x:%02x:%02x.%01x with option %d\n",
468 __func__, hose->global_number, dev->bus->number,
469 PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), option);
470
471 switch (option) {
472 case EEH_RESET_FUNDAMENTAL:
473 case EEH_RESET_HOT:
474 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl);
475 ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
476 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
477 break;
478 case EEH_RESET_DEACTIVATE:
479 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl);
480 ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
481 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
482 break;
483 }
484
485 return 0;
486 }
487
488 /**
489 * ioda_eeh_reset - Reset the indicated PE
490 * @pe: EEH PE
491 * @option: reset option
492 *
493 * Do reset on the indicated PE. For PCI bus sensitive PE,
494 * we need to reset the parent p2p bridge. The PHB has to
495 * be reinitialized if the p2p bridge is root bridge. For
496 * PCI device sensitive PE, we will try to reset the device
497 * through FLR. For now, we don't have OPAL APIs to do HARD
498 * reset yet, so all reset would be SOFT (HOT) reset.
499 */
500 static int ioda_eeh_reset(struct eeh_pe *pe, int option)
501 {
502 struct pci_controller *hose = pe->phb;
503 struct eeh_dev *edev;
504 struct pci_dev *dev;
505 int ret;
506
507 /*
508 * Anyway, we have to clear the problematic state for the
509 * corresponding PE. However, we needn't do it if the PE
510 * is PHB associated. That means the PHB is having fatal
511 * errors and it needs reset. Further more, the AIB interface
512 * isn't reliable any more.
513 */
514 if (!(pe->type & EEH_PE_PHB) &&
515 (option == EEH_RESET_HOT ||
516 option == EEH_RESET_FUNDAMENTAL)) {
517 ret = ioda_eeh_pe_clear(pe);
518 if (ret)
519 return -EIO;
520 }
521
522 /*
523 * The rules applied to reset, either fundamental or hot reset:
524 *
525 * We always reset the direct upstream bridge of the PE. If the
526 * direct upstream bridge isn't root bridge, we always take hot
527 * reset no matter what option (fundamental or hot) is. Otherwise,
528 * we should do the reset according to the required option.
529 */
530 if (pe->type & EEH_PE_PHB) {
531 ret = ioda_eeh_phb_reset(hose, option);
532 } else {
533 if (pe->type & EEH_PE_DEVICE) {
534 /*
535 * If it's device PE, we didn't refer to the parent
536 * PCI bus yet. So we have to figure it out indirectly.
537 */
538 edev = list_first_entry(&pe->edevs,
539 struct eeh_dev, list);
540 dev = eeh_dev_to_pci_dev(edev);
541 dev = dev->bus->self;
542 } else {
543 /*
544 * If it's bus PE, the parent PCI bus is already there
545 * and just pick it up.
546 */
547 dev = pe->bus->self;
548 }
549
550 /*
551 * Do reset based on the fact that the direct upstream bridge
552 * is root bridge (port) or not.
553 */
554 if (dev->bus->number == 0)
555 ret = ioda_eeh_root_reset(hose, option);
556 else
557 ret = ioda_eeh_bridge_reset(hose, dev, option);
558 }
559
560 return ret;
561 }
562
563 /**
564 * ioda_eeh_get_log - Retrieve error log
565 * @pe: EEH PE
566 * @severity: Severity level of the log
567 * @drv_log: buffer to store the log
568 * @len: space of the log buffer
569 *
570 * The function is used to retrieve error log from P7IOC.
571 */
572 static int ioda_eeh_get_log(struct eeh_pe *pe, int severity,
573 char *drv_log, unsigned long len)
574 {
575 s64 ret;
576 unsigned long flags;
577 struct pci_controller *hose = pe->phb;
578 struct pnv_phb *phb = hose->private_data;
579
580 spin_lock_irqsave(&phb->lock, flags);
581
582 ret = opal_pci_get_phb_diag_data2(phb->opal_id,
583 phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE);
584 if (ret) {
585 spin_unlock_irqrestore(&phb->lock, flags);
586 pr_warning("%s: Can't get log for PHB#%x-PE#%x (%lld)\n",
587 __func__, hose->global_number, pe->addr, ret);
588 return -EIO;
589 }
590
591 /*
592 * FIXME: We probably need log the error in somewhere.
593 * Lets make it up in future.
594 */
595 /* pr_info("%s", phb->diag.blob); */
596
597 spin_unlock_irqrestore(&phb->lock, flags);
598
599 return 0;
600 }
601
602 /**
603 * ioda_eeh_configure_bridge - Configure the PCI bridges for the indicated PE
604 * @pe: EEH PE
605 *
606 * For particular PE, it might have included PCI bridges. In order
607 * to make the PE work properly, those PCI bridges should be configured
608 * correctly. However, we need do nothing on P7IOC since the reset
609 * function will do everything that should be covered by the function.
610 */
611 static int ioda_eeh_configure_bridge(struct eeh_pe *pe)
612 {
613 return 0;
614 }
615
616 static void ioda_eeh_hub_diag_common(struct OpalIoP7IOCErrorData *data)
617 {
618 /* GEM */
619 pr_info(" GEM XFIR: %016llx\n", data->gemXfir);
620 pr_info(" GEM RFIR: %016llx\n", data->gemRfir);
621 pr_info(" GEM RIRQFIR: %016llx\n", data->gemRirqfir);
622 pr_info(" GEM Mask: %016llx\n", data->gemMask);
623 pr_info(" GEM RWOF: %016llx\n", data->gemRwof);
624
625 /* LEM */
626 pr_info(" LEM FIR: %016llx\n", data->lemFir);
627 pr_info(" LEM Error Mask: %016llx\n", data->lemErrMask);
628 pr_info(" LEM Action 0: %016llx\n", data->lemAction0);
629 pr_info(" LEM Action 1: %016llx\n", data->lemAction1);
630 pr_info(" LEM WOF: %016llx\n", data->lemWof);
631 }
632
633 static void ioda_eeh_hub_diag(struct pci_controller *hose)
634 {
635 struct pnv_phb *phb = hose->private_data;
636 struct OpalIoP7IOCErrorData *data;
637 long rc;
638
639 data = (struct OpalIoP7IOCErrorData *)ioda_eeh_hub_diag;
640 rc = opal_pci_get_hub_diag_data(phb->hub_id, data, PAGE_SIZE);
641 if (rc != OPAL_SUCCESS) {
642 pr_warning("%s: Failed to get HUB#%llx diag-data (%ld)\n",
643 __func__, phb->hub_id, rc);
644 return;
645 }
646
647 switch (data->type) {
648 case OPAL_P7IOC_DIAG_TYPE_RGC:
649 pr_info("P7IOC diag-data for RGC\n\n");
650 ioda_eeh_hub_diag_common(data);
651 pr_info(" RGC Status: %016llx\n", data->rgc.rgcStatus);
652 pr_info(" RGC LDCP: %016llx\n", data->rgc.rgcLdcp);
653 break;
654 case OPAL_P7IOC_DIAG_TYPE_BI:
655 pr_info("P7IOC diag-data for BI %s\n\n",
656 data->bi.biDownbound ? "Downbound" : "Upbound");
657 ioda_eeh_hub_diag_common(data);
658 pr_info(" BI LDCP 0: %016llx\n", data->bi.biLdcp0);
659 pr_info(" BI LDCP 1: %016llx\n", data->bi.biLdcp1);
660 pr_info(" BI LDCP 2: %016llx\n", data->bi.biLdcp2);
661 pr_info(" BI Fence Status: %016llx\n", data->bi.biFenceStatus);
662 break;
663 case OPAL_P7IOC_DIAG_TYPE_CI:
664 pr_info("P7IOC diag-data for CI Port %d\\nn",
665 data->ci.ciPort);
666 ioda_eeh_hub_diag_common(data);
667 pr_info(" CI Port Status: %016llx\n", data->ci.ciPortStatus);
668 pr_info(" CI Port LDCP: %016llx\n", data->ci.ciPortLdcp);
669 break;
670 case OPAL_P7IOC_DIAG_TYPE_MISC:
671 pr_info("P7IOC diag-data for MISC\n\n");
672 ioda_eeh_hub_diag_common(data);
673 break;
674 case OPAL_P7IOC_DIAG_TYPE_I2C:
675 pr_info("P7IOC diag-data for I2C\n\n");
676 ioda_eeh_hub_diag_common(data);
677 break;
678 default:
679 pr_warning("%s: Invalid type of HUB#%llx diag-data (%d)\n",
680 __func__, phb->hub_id, data->type);
681 }
682 }
683
684 static void ioda_eeh_p7ioc_phb_diag(struct pci_controller *hose,
685 struct OpalIoPhbErrorCommon *common)
686 {
687 struct OpalIoP7IOCPhbErrorData *data;
688 int i;
689
690 data = (struct OpalIoP7IOCPhbErrorData *)common;
691
692 pr_info("P7IOC PHB#%x Diag-data (Version: %d)\n\n",
693 hose->global_number, common->version);
694
695 pr_info(" brdgCtl: %08x\n", data->brdgCtl);
696
697 pr_info(" portStatusReg: %08x\n", data->portStatusReg);
698 pr_info(" rootCmplxStatus: %08x\n", data->rootCmplxStatus);
699 pr_info(" busAgentStatus: %08x\n", data->busAgentStatus);
700
701 pr_info(" deviceStatus: %08x\n", data->deviceStatus);
702 pr_info(" slotStatus: %08x\n", data->slotStatus);
703 pr_info(" linkStatus: %08x\n", data->linkStatus);
704 pr_info(" devCmdStatus: %08x\n", data->devCmdStatus);
705 pr_info(" devSecStatus: %08x\n", data->devSecStatus);
706
707 pr_info(" rootErrorStatus: %08x\n", data->rootErrorStatus);
708 pr_info(" uncorrErrorStatus: %08x\n", data->uncorrErrorStatus);
709 pr_info(" corrErrorStatus: %08x\n", data->corrErrorStatus);
710 pr_info(" tlpHdr1: %08x\n", data->tlpHdr1);
711 pr_info(" tlpHdr2: %08x\n", data->tlpHdr2);
712 pr_info(" tlpHdr3: %08x\n", data->tlpHdr3);
713 pr_info(" tlpHdr4: %08x\n", data->tlpHdr4);
714 pr_info(" sourceId: %08x\n", data->sourceId);
715
716 pr_info(" errorClass: %016llx\n", data->errorClass);
717 pr_info(" correlator: %016llx\n", data->correlator);
718 pr_info(" p7iocPlssr: %016llx\n", data->p7iocPlssr);
719 pr_info(" p7iocCsr: %016llx\n", data->p7iocCsr);
720 pr_info(" lemFir: %016llx\n", data->lemFir);
721 pr_info(" lemErrorMask: %016llx\n", data->lemErrorMask);
722 pr_info(" lemWOF: %016llx\n", data->lemWOF);
723 pr_info(" phbErrorStatus: %016llx\n", data->phbErrorStatus);
724 pr_info(" phbFirstErrorStatus: %016llx\n", data->phbFirstErrorStatus);
725 pr_info(" phbErrorLog0: %016llx\n", data->phbErrorLog0);
726 pr_info(" phbErrorLog1: %016llx\n", data->phbErrorLog1);
727 pr_info(" mmioErrorStatus: %016llx\n", data->mmioErrorStatus);
728 pr_info(" mmioFirstErrorStatus: %016llx\n", data->mmioFirstErrorStatus);
729 pr_info(" mmioErrorLog0: %016llx\n", data->mmioErrorLog0);
730 pr_info(" mmioErrorLog1: %016llx\n", data->mmioErrorLog1);
731 pr_info(" dma0ErrorStatus: %016llx\n", data->dma0ErrorStatus);
732 pr_info(" dma0FirstErrorStatus: %016llx\n", data->dma0FirstErrorStatus);
733 pr_info(" dma0ErrorLog0: %016llx\n", data->dma0ErrorLog0);
734 pr_info(" dma0ErrorLog1: %016llx\n", data->dma0ErrorLog1);
735 pr_info(" dma1ErrorStatus: %016llx\n", data->dma1ErrorStatus);
736 pr_info(" dma1FirstErrorStatus: %016llx\n", data->dma1FirstErrorStatus);
737 pr_info(" dma1ErrorLog0: %016llx\n", data->dma1ErrorLog0);
738 pr_info(" dma1ErrorLog1: %016llx\n", data->dma1ErrorLog1);
739
740 for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) {
741 if ((data->pestA[i] >> 63) == 0 &&
742 (data->pestB[i] >> 63) == 0)
743 continue;
744
745 pr_info(" PE[%3d] PESTA: %016llx\n", i, data->pestA[i]);
746 pr_info(" PESTB: %016llx\n", data->pestB[i]);
747 }
748 }
749
750 static void ioda_eeh_phb_diag(struct pci_controller *hose)
751 {
752 struct pnv_phb *phb = hose->private_data;
753 struct OpalIoPhbErrorCommon *common;
754 long rc;
755
756 common = (struct OpalIoPhbErrorCommon *)phb->diag.blob;
757 rc = opal_pci_get_phb_diag_data2(phb->opal_id, common, PAGE_SIZE);
758 if (rc != OPAL_SUCCESS) {
759 pr_warning("%s: Failed to get diag-data for PHB#%x (%ld)\n",
760 __func__, hose->global_number, rc);
761 return;
762 }
763
764 switch (common->ioType) {
765 case OPAL_PHB_ERROR_DATA_TYPE_P7IOC:
766 ioda_eeh_p7ioc_phb_diag(hose, common);
767 break;
768 default:
769 pr_warning("%s: Unrecognized I/O chip %d\n",
770 __func__, common->ioType);
771 }
772 }
773
774 static int ioda_eeh_get_phb_pe(struct pci_controller *hose,
775 struct eeh_pe **pe)
776 {
777 struct eeh_pe *phb_pe;
778
779 phb_pe = eeh_phb_pe_get(hose);
780 if (!phb_pe) {
781 pr_warning("%s Can't find PE for PHB#%d\n",
782 __func__, hose->global_number);
783 return -EEXIST;
784 }
785
786 *pe = phb_pe;
787 return 0;
788 }
789
790 static int ioda_eeh_get_pe(struct pci_controller *hose,
791 u16 pe_no, struct eeh_pe **pe)
792 {
793 struct eeh_pe *phb_pe, *dev_pe;
794 struct eeh_dev dev;
795
796 /* Find the PHB PE */
797 if (ioda_eeh_get_phb_pe(hose, &phb_pe))
798 return -EEXIST;
799
800 /* Find the PE according to PE# */
801 memset(&dev, 0, sizeof(struct eeh_dev));
802 dev.phb = hose;
803 dev.pe_config_addr = pe_no;
804 dev_pe = eeh_pe_get(&dev);
805 if (!dev_pe) {
806 pr_warning("%s: Can't find PE for PHB#%x - PE#%x\n",
807 __func__, hose->global_number, pe_no);
808 return -EEXIST;
809 }
810
811 *pe = dev_pe;
812 return 0;
813 }
814
815 /**
816 * ioda_eeh_next_error - Retrieve next error for EEH core to handle
817 * @pe: The affected PE
818 *
819 * The function is expected to be called by EEH core while it gets
820 * special EEH event (without binding PE). The function calls to
821 * OPAL APIs for next error to handle. The informational error is
822 * handled internally by platform. However, the dead IOC, dead PHB,
823 * fenced PHB and frozen PE should be handled by EEH core eventually.
824 */
825 static int ioda_eeh_next_error(struct eeh_pe **pe)
826 {
827 struct pci_controller *hose, *tmp;
828 struct pnv_phb *phb;
829 u64 frozen_pe_no;
830 u16 err_type, severity;
831 long rc;
832 int ret = 1;
833
834 /*
835 * While running here, it's safe to purge the event queue.
836 * And we should keep the cached OPAL notifier event sychronized
837 * between the kernel and firmware.
838 */
839 eeh_remove_event(NULL);
840 opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul);
841
842 list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
843 /*
844 * If the subordinate PCI buses of the PHB has been
845 * removed, we needn't take care of it any more.
846 */
847 phb = hose->private_data;
848 if (phb->eeh_state & PNV_EEH_STATE_REMOVED)
849 continue;
850
851 rc = opal_pci_next_error(phb->opal_id,
852 &frozen_pe_no, &err_type, &severity);
853
854 /* If OPAL API returns error, we needn't proceed */
855 if (rc != OPAL_SUCCESS) {
856 pr_devel("%s: Invalid return value on "
857 "PHB#%x (0x%lx) from opal_pci_next_error",
858 __func__, hose->global_number, rc);
859 continue;
860 }
861
862 /* If the PHB doesn't have error, stop processing */
863 if (err_type == OPAL_EEH_NO_ERROR ||
864 severity == OPAL_EEH_SEV_NO_ERROR) {
865 pr_devel("%s: No error found on PHB#%x\n",
866 __func__, hose->global_number);
867 continue;
868 }
869
870 /*
871 * Processing the error. We're expecting the error with
872 * highest priority reported upon multiple errors on the
873 * specific PHB.
874 */
875 pr_devel("%s: Error (%d, %d, %llu) on PHB#%x\n",
876 __func__, err_type, severity,
877 frozen_pe_no, hose->global_number);
878 switch (err_type) {
879 case OPAL_EEH_IOC_ERROR:
880 if (severity == OPAL_EEH_SEV_IOC_DEAD) {
881 list_for_each_entry_safe(hose, tmp,
882 &hose_list, list_node) {
883 phb = hose->private_data;
884 phb->eeh_state |= PNV_EEH_STATE_REMOVED;
885 }
886
887 pr_err("EEH: dead IOC detected\n");
888 ret = 4;
889 goto out;
890 } else if (severity == OPAL_EEH_SEV_INF) {
891 pr_info("EEH: IOC informative error "
892 "detected\n");
893 ioda_eeh_hub_diag(hose);
894 }
895
896 break;
897 case OPAL_EEH_PHB_ERROR:
898 if (severity == OPAL_EEH_SEV_PHB_DEAD) {
899 if (ioda_eeh_get_phb_pe(hose, pe))
900 break;
901
902 pr_err("EEH: dead PHB#%x detected\n",
903 hose->global_number);
904 phb->eeh_state |= PNV_EEH_STATE_REMOVED;
905 ret = 3;
906 goto out;
907 } else if (severity == OPAL_EEH_SEV_PHB_FENCED) {
908 if (ioda_eeh_get_phb_pe(hose, pe))
909 break;
910
911 pr_err("EEH: fenced PHB#%x detected\n",
912 hose->global_number);
913 ret = 2;
914 goto out;
915 } else if (severity == OPAL_EEH_SEV_INF) {
916 pr_info("EEH: PHB#%x informative error "
917 "detected\n",
918 hose->global_number);
919 ioda_eeh_phb_diag(hose);
920 }
921
922 break;
923 case OPAL_EEH_PE_ERROR:
924 if (ioda_eeh_get_pe(hose, frozen_pe_no, pe))
925 break;
926
927 pr_err("EEH: Frozen PE#%x on PHB#%x detected\n",
928 (*pe)->addr, (*pe)->phb->global_number);
929 ret = 1;
930 goto out;
931 }
932 }
933
934 ret = 0;
935 out:
936 return ret;
937 }
938
939 struct pnv_eeh_ops ioda_eeh_ops = {
940 .post_init = ioda_eeh_post_init,
941 .set_option = ioda_eeh_set_option,
942 .get_state = ioda_eeh_get_state,
943 .reset = ioda_eeh_reset,
944 .get_log = ioda_eeh_get_log,
945 .configure_bridge = ioda_eeh_configure_bridge,
946 .next_error = ioda_eeh_next_error
947 };
Linux with added FPC-III support