1 /* SPDX-License-Identifier: GPL-2.0 */
2 #include <linux/suspend.h>
3 #include <linux/suspend_ioctls.h>
4 #include <linux/utsname.h>
5 #include <linux/freezer.h>
6 #include <linux/compiler.h>
9 struct new_utsname uts
;
11 unsigned long num_physpages
;
13 unsigned long image_pages
;
16 } __aligned(PAGE_SIZE
);
18 #ifdef CONFIG_HIBERNATION
19 /* kernel/power/snapshot.c */
20 extern void __init
hibernate_reserved_size_init(void);
21 extern void __init
hibernate_image_size_init(void);
23 #ifdef CONFIG_ARCH_HIBERNATION_HEADER
24 /* Maximum size of architecture specific data in a hibernation header */
25 #define MAX_ARCH_HEADER_SIZE (sizeof(struct new_utsname) + 4)
27 extern int arch_hibernation_header_save(void *addr
, unsigned int max_size
);
28 extern int arch_hibernation_header_restore(void *addr
);
30 static inline int init_header_complete(struct swsusp_info
*info
)
32 return arch_hibernation_header_save(info
, MAX_ARCH_HEADER_SIZE
);
35 static inline char *check_image_kernel(struct swsusp_info
*info
)
37 return arch_hibernation_header_restore(info
) ?
38 "architecture specific data" : NULL
;
40 #endif /* CONFIG_ARCH_HIBERNATION_HEADER */
42 extern int hibernate_resume_nonboot_cpu_disable(void);
45 * Keep some memory free so that I/O operations can succeed without paging
46 * [Might this be more than 4 MB?]
48 #define PAGES_FOR_IO ((4096 * 1024) >> PAGE_SHIFT)
51 * Keep 1 MB of memory free so that device drivers can allocate some pages in
52 * their .suspend() routines without breaking the suspend to disk.
54 #define SPARE_PAGES ((1024 * 1024) >> PAGE_SHIFT)
56 asmlinkage
int swsusp_save(void);
58 /* kernel/power/hibernate.c */
59 extern bool freezer_test_done
;
61 extern int hibernation_snapshot(int platform_mode
);
62 extern int hibernation_restore(int platform_mode
);
63 extern int hibernation_platform_enter(void);
65 #ifdef CONFIG_STRICT_KERNEL_RWX
66 /* kernel/power/snapshot.c */
67 extern void enable_restore_image_protection(void);
69 static inline void enable_restore_image_protection(void) {}
70 #endif /* CONFIG_STRICT_KERNEL_RWX */
72 #else /* !CONFIG_HIBERNATION */
74 static inline void hibernate_reserved_size_init(void) {}
75 static inline void hibernate_image_size_init(void) {}
76 #endif /* !CONFIG_HIBERNATION */
78 extern int pfn_is_nosave(unsigned long);
80 #define power_attr(_name) \
81 static struct kobj_attribute _name##_attr = { \
83 .name = __stringify(_name), \
86 .show = _name##_show, \
87 .store = _name##_store, \
90 #define power_attr_ro(_name) \
91 static struct kobj_attribute _name##_attr = { \
93 .name = __stringify(_name), \
96 .show = _name##_show, \
99 /* Preferred image size in bytes (default 500 MB) */
100 extern unsigned long image_size
;
101 /* Size of memory reserved for drivers (default SPARE_PAGES x PAGE_SIZE) */
102 extern unsigned long reserved_size
;
103 extern int in_suspend
;
104 extern dev_t swsusp_resume_device
;
105 extern sector_t swsusp_resume_block
;
107 extern int create_basic_memory_bitmaps(void);
108 extern void free_basic_memory_bitmaps(void);
109 extern int hibernate_preallocate_memory(void);
111 extern void clear_free_pages(void);
114 * Auxiliary structure used for reading the snapshot image data and
115 * metadata from and writing them to the list of page backup entries
116 * (PBEs) which is the main data structure of swsusp.
118 * Using struct snapshot_handle we can transfer the image, including its
119 * metadata, as a continuous sequence of bytes with the help of
120 * snapshot_read_next() and snapshot_write_next().
122 * The code that writes the image to a storage or transfers it to
123 * the user land is required to use snapshot_read_next() for this
124 * purpose and it should not make any assumptions regarding the internal
125 * structure of the image. Similarly, the code that reads the image from
126 * a storage or transfers it from the user land is required to use
127 * snapshot_write_next().
129 * This may allow us to change the internal structure of the image
130 * in the future with considerably less effort.
133 struct snapshot_handle
{
134 unsigned int cur
; /* number of the block of PAGE_SIZE bytes the
135 * next operation will refer to (ie. current)
137 void *buffer
; /* address of the block to read from
140 int sync_read
; /* Set to one to notify the caller of
141 * snapshot_write_next() that it may
142 * need to call wait_on_bio_chain()
146 /* This macro returns the address from/to which the caller of
147 * snapshot_read_next()/snapshot_write_next() is allowed to
148 * read/write data after the function returns
150 #define data_of(handle) ((handle).buffer)
152 extern unsigned int snapshot_additional_pages(struct zone
*zone
);
153 extern unsigned long snapshot_get_image_size(void);
154 extern int snapshot_read_next(struct snapshot_handle
*handle
);
155 extern int snapshot_write_next(struct snapshot_handle
*handle
);
156 extern void snapshot_write_finalize(struct snapshot_handle
*handle
);
157 extern int snapshot_image_loaded(struct snapshot_handle
*handle
);
159 /* If unset, the snapshot device cannot be open. */
160 extern atomic_t snapshot_device_available
;
162 extern sector_t
alloc_swapdev_block(int swap
);
163 extern void free_all_swap_pages(int swap
);
164 extern int swsusp_swap_in_use(void);
167 * Flags that can be passed from the hibernatig hernel to the "boot" kernel in
170 #define SF_PLATFORM_MODE 1
171 #define SF_NOCOMPRESS_MODE 2
172 #define SF_CRC32_MODE 4
174 /* kernel/power/hibernate.c */
175 extern int swsusp_check(void);
176 extern void swsusp_free(void);
177 extern int swsusp_read(unsigned int *flags_p
);
178 extern int swsusp_write(unsigned int flags
);
179 extern void swsusp_close(fmode_t
);
180 #ifdef CONFIG_SUSPEND
181 extern int swsusp_unmark(void);
185 /* kernel/power/swsusp.c */
186 extern void swsusp_show_speed(ktime_t
, ktime_t
, unsigned int, char *);
188 #ifdef CONFIG_SUSPEND
189 /* kernel/power/suspend.c */
190 extern const char * const pm_labels
[];
191 extern const char *pm_states
[];
192 extern const char *mem_sleep_states
[];
194 extern int suspend_devices_and_enter(suspend_state_t state
);
195 #else /* !CONFIG_SUSPEND */
196 #define mem_sleep_current PM_SUSPEND_ON
198 static inline int suspend_devices_and_enter(suspend_state_t state
)
202 #endif /* !CONFIG_SUSPEND */
204 #ifdef CONFIG_PM_TEST_SUSPEND
205 /* kernel/power/suspend_test.c */
206 extern void suspend_test_start(void);
207 extern void suspend_test_finish(const char *label
);
208 #else /* !CONFIG_PM_TEST_SUSPEND */
209 static inline void suspend_test_start(void) {}
210 static inline void suspend_test_finish(const char *label
) {}
211 #endif /* !CONFIG_PM_TEST_SUSPEND */
213 #ifdef CONFIG_PM_SLEEP
214 /* kernel/power/main.c */
215 extern int __pm_notifier_call_chain(unsigned long val
, int nr_to_call
,
217 extern int pm_notifier_call_chain(unsigned long val
);
220 #ifdef CONFIG_HIGHMEM
221 int restore_highmem(void);
223 static inline unsigned int count_highmem_pages(void) { return 0; }
224 static inline int restore_highmem(void) { return 0; }
228 * Suspend test levels
242 #define TEST_FIRST TEST_NONE
243 #define TEST_MAX (__TEST_AFTER_LAST - 1)
245 #ifdef CONFIG_PM_SLEEP_DEBUG
246 extern int pm_test_level
;
248 #define pm_test_level (TEST_NONE)
251 #ifdef CONFIG_SUSPEND_FREEZER
252 static inline int suspend_freeze_processes(void)
256 error
= freeze_processes();
258 * freeze_processes() automatically thaws every task if freezing
259 * fails. So we need not do anything extra upon error.
264 error
= freeze_kernel_threads();
266 * freeze_kernel_threads() thaws only kernel threads upon freezing
267 * failure. So we have to thaw the userspace tasks ourselves.
275 static inline void suspend_thaw_processes(void)
280 static inline int suspend_freeze_processes(void)
285 static inline void suspend_thaw_processes(void)
290 #ifdef CONFIG_PM_AUTOSLEEP
292 /* kernel/power/autosleep.c */
293 extern int pm_autosleep_init(void);
294 extern int pm_autosleep_lock(void);
295 extern void pm_autosleep_unlock(void);
296 extern suspend_state_t
pm_autosleep_state(void);
297 extern int pm_autosleep_set_state(suspend_state_t state
);
299 #else /* !CONFIG_PM_AUTOSLEEP */
301 static inline int pm_autosleep_init(void) { return 0; }
302 static inline int pm_autosleep_lock(void) { return 0; }
303 static inline void pm_autosleep_unlock(void) {}
304 static inline suspend_state_t
pm_autosleep_state(void) { return PM_SUSPEND_ON
; }
306 #endif /* !CONFIG_PM_AUTOSLEEP */
308 #ifdef CONFIG_PM_WAKELOCKS
310 /* kernel/power/wakelock.c */
311 extern ssize_t
pm_show_wakelocks(char *buf
, bool show_active
);
312 extern int pm_wake_lock(const char *buf
);
313 extern int pm_wake_unlock(const char *buf
);
315 #endif /* !CONFIG_PM_WAKELOCKS */