Linux 4.1.16
[linux/fpc-iii.git] / drivers / acpi / acpica / rscalc.c
blobcb739a6949311d771c9113b645b48989fcfce0b4
1 /*******************************************************************************
3 * Module Name: rscalc - Calculate stream and list lengths
5 ******************************************************************************/
7 /*
8 * Copyright (C) 2000 - 2015, Intel Corp.
9 * All rights reserved.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
44 #include <acpi/acpi.h>
45 #include "accommon.h"
46 #include "acresrc.h"
47 #include "acnamesp.h"
49 #define _COMPONENT ACPI_RESOURCES
50 ACPI_MODULE_NAME("rscalc")
52 /* Local prototypes */
53 static u8 acpi_rs_count_set_bits(u16 bit_field);
55 static acpi_rs_length
56 acpi_rs_struct_option_length(struct acpi_resource_source *resource_source);
58 static u32
59 acpi_rs_stream_option_length(u32 resource_length, u32 minimum_total_length);
61 /*******************************************************************************
63 * FUNCTION: acpi_rs_count_set_bits
65 * PARAMETERS: bit_field - Field in which to count bits
67 * RETURN: Number of bits set within the field
69 * DESCRIPTION: Count the number of bits set in a resource field. Used for
70 * (Short descriptor) interrupt and DMA lists.
72 ******************************************************************************/
74 static u8 acpi_rs_count_set_bits(u16 bit_field)
76 u8 bits_set;
78 ACPI_FUNCTION_ENTRY();
80 for (bits_set = 0; bit_field; bits_set++) {
82 /* Zero the least significant bit that is set */
84 bit_field &= (u16) (bit_field - 1);
87 return (bits_set);
90 /*******************************************************************************
92 * FUNCTION: acpi_rs_struct_option_length
94 * PARAMETERS: resource_source - Pointer to optional descriptor field
96 * RETURN: Status
98 * DESCRIPTION: Common code to handle optional resource_source_index and
99 * resource_source fields in some Large descriptors. Used during
100 * list-to-stream conversion
102 ******************************************************************************/
104 static acpi_rs_length
105 acpi_rs_struct_option_length(struct acpi_resource_source *resource_source)
107 ACPI_FUNCTION_ENTRY();
110 * If the resource_source string is valid, return the size of the string
111 * (string_length includes the NULL terminator) plus the size of the
112 * resource_source_index (1).
114 if (resource_source->string_ptr) {
115 return ((acpi_rs_length) (resource_source->string_length + 1));
118 return (0);
121 /*******************************************************************************
123 * FUNCTION: acpi_rs_stream_option_length
125 * PARAMETERS: resource_length - Length from the resource header
126 * minimum_total_length - Minimum length of this resource, before
127 * any optional fields. Includes header size
129 * RETURN: Length of optional string (0 if no string present)
131 * DESCRIPTION: Common code to handle optional resource_source_index and
132 * resource_source fields in some Large descriptors. Used during
133 * stream-to-list conversion
135 ******************************************************************************/
137 static u32
138 acpi_rs_stream_option_length(u32 resource_length,
139 u32 minimum_aml_resource_length)
141 u32 string_length = 0;
143 ACPI_FUNCTION_ENTRY();
146 * The resource_source_index and resource_source are optional elements of some
147 * Large-type resource descriptors.
151 * If the length of the actual resource descriptor is greater than the ACPI
152 * spec-defined minimum length, it means that a resource_source_index exists
153 * and is followed by a (required) null terminated string. The string length
154 * (including the null terminator) is the resource length minus the minimum
155 * length, minus one byte for the resource_source_index itself.
157 if (resource_length > minimum_aml_resource_length) {
159 /* Compute the length of the optional string */
161 string_length =
162 resource_length - minimum_aml_resource_length - 1;
166 * Round the length up to a multiple of the native word in order to
167 * guarantee that the entire resource descriptor is native word aligned
169 return ((u32) ACPI_ROUND_UP_TO_NATIVE_WORD(string_length));
172 /*******************************************************************************
174 * FUNCTION: acpi_rs_get_aml_length
176 * PARAMETERS: resource - Pointer to the resource linked list
177 * resource_list_size - Size of the resource linked list
178 * size_needed - Where the required size is returned
180 * RETURN: Status
182 * DESCRIPTION: Takes a linked list of internal resource descriptors and
183 * calculates the size buffer needed to hold the corresponding
184 * external resource byte stream.
186 ******************************************************************************/
188 acpi_status
189 acpi_rs_get_aml_length(struct acpi_resource *resource,
190 acpi_size resource_list_size, acpi_size * size_needed)
192 acpi_size aml_size_needed = 0;
193 struct acpi_resource *resource_end;
194 acpi_rs_length total_size;
196 ACPI_FUNCTION_TRACE(rs_get_aml_length);
198 /* Traverse entire list of internal resource descriptors */
200 resource_end =
201 ACPI_ADD_PTR(struct acpi_resource, resource, resource_list_size);
202 while (resource < resource_end) {
204 /* Validate the descriptor type */
206 if (resource->type > ACPI_RESOURCE_TYPE_MAX) {
207 return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
210 /* Sanity check the length. It must not be zero, or we loop forever */
212 if (!resource->length) {
213 return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH);
216 /* Get the base size of the (external stream) resource descriptor */
218 total_size = acpi_gbl_aml_resource_sizes[resource->type];
221 * Augment the base size for descriptors with optional and/or
222 * variable-length fields
224 switch (resource->type) {
225 case ACPI_RESOURCE_TYPE_IRQ:
227 /* Length can be 3 or 2 */
229 if (resource->data.irq.descriptor_length == 2) {
230 total_size--;
232 break;
234 case ACPI_RESOURCE_TYPE_START_DEPENDENT:
236 /* Length can be 1 or 0 */
238 if (resource->data.irq.descriptor_length == 0) {
239 total_size--;
241 break;
243 case ACPI_RESOURCE_TYPE_VENDOR:
245 * Vendor Defined Resource:
246 * For a Vendor Specific resource, if the Length is between 1 and 7
247 * it will be created as a Small Resource data type, otherwise it
248 * is a Large Resource data type.
250 if (resource->data.vendor.byte_length > 7) {
252 /* Base size of a Large resource descriptor */
254 total_size =
255 sizeof(struct aml_resource_large_header);
258 /* Add the size of the vendor-specific data */
260 total_size = (acpi_rs_length)
261 (total_size + resource->data.vendor.byte_length);
262 break;
264 case ACPI_RESOURCE_TYPE_END_TAG:
266 * End Tag:
267 * We are done -- return the accumulated total size.
269 *size_needed = aml_size_needed + total_size;
271 /* Normal exit */
273 return_ACPI_STATUS(AE_OK);
275 case ACPI_RESOURCE_TYPE_ADDRESS16:
277 * 16-Bit Address Resource:
278 * Add the size of the optional resource_source info
280 total_size = (acpi_rs_length)
281 (total_size +
282 acpi_rs_struct_option_length(&resource->data.
283 address16.
284 resource_source));
285 break;
287 case ACPI_RESOURCE_TYPE_ADDRESS32:
289 * 32-Bit Address Resource:
290 * Add the size of the optional resource_source info
292 total_size = (acpi_rs_length)
293 (total_size +
294 acpi_rs_struct_option_length(&resource->data.
295 address32.
296 resource_source));
297 break;
299 case ACPI_RESOURCE_TYPE_ADDRESS64:
301 * 64-Bit Address Resource:
302 * Add the size of the optional resource_source info
304 total_size = (acpi_rs_length)
305 (total_size +
306 acpi_rs_struct_option_length(&resource->data.
307 address64.
308 resource_source));
309 break;
311 case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
313 * Extended IRQ Resource:
314 * Add the size of each additional optional interrupt beyond the
315 * required 1 (4 bytes for each u32 interrupt number)
317 total_size = (acpi_rs_length)
318 (total_size +
319 ((resource->data.extended_irq.interrupt_count -
320 1) * 4) +
321 /* Add the size of the optional resource_source info */
322 acpi_rs_struct_option_length(&resource->data.
323 extended_irq.
324 resource_source));
325 break;
327 case ACPI_RESOURCE_TYPE_GPIO:
329 total_size =
330 (acpi_rs_length) (total_size +
331 (resource->data.gpio.
332 pin_table_length * 2) +
333 resource->data.gpio.
334 resource_source.string_length +
335 resource->data.gpio.
336 vendor_length);
338 break;
340 case ACPI_RESOURCE_TYPE_SERIAL_BUS:
342 total_size =
343 acpi_gbl_aml_resource_serial_bus_sizes[resource->
344 data.
345 common_serial_bus.
346 type];
348 total_size = (acpi_rs_length) (total_size +
349 resource->data.
350 i2c_serial_bus.
351 resource_source.
352 string_length +
353 resource->data.
354 i2c_serial_bus.
355 vendor_length);
357 break;
359 default:
361 break;
364 /* Update the total */
366 aml_size_needed += total_size;
368 /* Point to the next object */
370 resource =
371 ACPI_ADD_PTR(struct acpi_resource, resource,
372 resource->length);
375 /* Did not find an end_tag resource descriptor */
377 return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
380 /*******************************************************************************
382 * FUNCTION: acpi_rs_get_list_length
384 * PARAMETERS: aml_buffer - Pointer to the resource byte stream
385 * aml_buffer_length - Size of aml_buffer
386 * size_needed - Where the size needed is returned
388 * RETURN: Status
390 * DESCRIPTION: Takes an external resource byte stream and calculates the size
391 * buffer needed to hold the corresponding internal resource
392 * descriptor linked list.
394 ******************************************************************************/
396 acpi_status
397 acpi_rs_get_list_length(u8 * aml_buffer,
398 u32 aml_buffer_length, acpi_size * size_needed)
400 acpi_status status;
401 u8 *end_aml;
402 u8 *buffer;
403 u32 buffer_size;
404 u16 temp16;
405 u16 resource_length;
406 u32 extra_struct_bytes;
407 u8 resource_index;
408 u8 minimum_aml_resource_length;
409 union aml_resource *aml_resource;
411 ACPI_FUNCTION_TRACE(rs_get_list_length);
413 *size_needed = ACPI_RS_SIZE_MIN; /* Minimum size is one end_tag */
414 end_aml = aml_buffer + aml_buffer_length;
416 /* Walk the list of AML resource descriptors */
418 while (aml_buffer < end_aml) {
420 /* Validate the Resource Type and Resource Length */
422 status =
423 acpi_ut_validate_resource(NULL, aml_buffer,
424 &resource_index);
425 if (ACPI_FAILURE(status)) {
427 * Exit on failure. Cannot continue because the descriptor length
428 * may be bogus also.
430 return_ACPI_STATUS(status);
433 aml_resource = (void *)aml_buffer;
435 /* Get the resource length and base (minimum) AML size */
437 resource_length = acpi_ut_get_resource_length(aml_buffer);
438 minimum_aml_resource_length =
439 acpi_gbl_resource_aml_sizes[resource_index];
442 * Augment the size for descriptors with optional
443 * and/or variable length fields
445 extra_struct_bytes = 0;
446 buffer =
447 aml_buffer + acpi_ut_get_resource_header_length(aml_buffer);
449 switch (acpi_ut_get_resource_type(aml_buffer)) {
450 case ACPI_RESOURCE_NAME_IRQ:
452 * IRQ Resource:
453 * Get the number of bits set in the 16-bit IRQ mask
455 ACPI_MOVE_16_TO_16(&temp16, buffer);
456 extra_struct_bytes = acpi_rs_count_set_bits(temp16);
457 break;
459 case ACPI_RESOURCE_NAME_DMA:
461 * DMA Resource:
462 * Get the number of bits set in the 8-bit DMA mask
464 extra_struct_bytes = acpi_rs_count_set_bits(*buffer);
465 break;
467 case ACPI_RESOURCE_NAME_VENDOR_SMALL:
468 case ACPI_RESOURCE_NAME_VENDOR_LARGE:
470 * Vendor Resource:
471 * Get the number of vendor data bytes
473 extra_struct_bytes = resource_length;
476 * There is already one byte included in the minimum
477 * descriptor size. If there are extra struct bytes,
478 * subtract one from the count.
480 if (extra_struct_bytes) {
481 extra_struct_bytes--;
483 break;
485 case ACPI_RESOURCE_NAME_END_TAG:
487 * End Tag: This is the normal exit
489 return_ACPI_STATUS(AE_OK);
491 case ACPI_RESOURCE_NAME_ADDRESS32:
492 case ACPI_RESOURCE_NAME_ADDRESS16:
493 case ACPI_RESOURCE_NAME_ADDRESS64:
495 * Address Resource:
496 * Add the size of the optional resource_source
498 extra_struct_bytes =
499 acpi_rs_stream_option_length(resource_length,
500 minimum_aml_resource_length);
501 break;
503 case ACPI_RESOURCE_NAME_EXTENDED_IRQ:
505 * Extended IRQ Resource:
506 * Using the interrupt_table_length, add 4 bytes for each additional
507 * interrupt. Note: at least one interrupt is required and is
508 * included in the minimum descriptor size (reason for the -1)
510 extra_struct_bytes = (buffer[1] - 1) * sizeof(u32);
512 /* Add the size of the optional resource_source */
514 extra_struct_bytes +=
515 acpi_rs_stream_option_length(resource_length -
516 extra_struct_bytes,
517 minimum_aml_resource_length);
518 break;
520 case ACPI_RESOURCE_NAME_GPIO:
522 /* Vendor data is optional */
524 if (aml_resource->gpio.vendor_length) {
525 extra_struct_bytes +=
526 aml_resource->gpio.vendor_offset -
527 aml_resource->gpio.pin_table_offset +
528 aml_resource->gpio.vendor_length;
529 } else {
530 extra_struct_bytes +=
531 aml_resource->large_header.resource_length +
532 sizeof(struct aml_resource_large_header) -
533 aml_resource->gpio.pin_table_offset;
535 break;
537 case ACPI_RESOURCE_NAME_SERIAL_BUS:
539 minimum_aml_resource_length =
540 acpi_gbl_resource_aml_serial_bus_sizes
541 [aml_resource->common_serial_bus.type];
542 extra_struct_bytes +=
543 aml_resource->common_serial_bus.resource_length -
544 minimum_aml_resource_length;
545 break;
547 default:
549 break;
553 * Update the required buffer size for the internal descriptor structs
555 * Important: Round the size up for the appropriate alignment. This
556 * is a requirement on IA64.
558 if (acpi_ut_get_resource_type(aml_buffer) ==
559 ACPI_RESOURCE_NAME_SERIAL_BUS) {
560 buffer_size =
561 acpi_gbl_resource_struct_serial_bus_sizes
562 [aml_resource->common_serial_bus.type] +
563 extra_struct_bytes;
564 } else {
565 buffer_size =
566 acpi_gbl_resource_struct_sizes[resource_index] +
567 extra_struct_bytes;
569 buffer_size = (u32)ACPI_ROUND_UP_TO_NATIVE_WORD(buffer_size);
571 *size_needed += buffer_size;
573 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
574 "Type %.2X, AmlLength %.2X InternalLength %.2X\n",
575 acpi_ut_get_resource_type(aml_buffer),
576 acpi_ut_get_descriptor_length(aml_buffer),
577 buffer_size));
580 * Point to the next resource within the AML stream using the length
581 * contained in the resource descriptor header
583 aml_buffer += acpi_ut_get_descriptor_length(aml_buffer);
586 /* Did not find an end_tag resource descriptor */
588 return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
591 /*******************************************************************************
593 * FUNCTION: acpi_rs_get_pci_routing_table_length
595 * PARAMETERS: package_object - Pointer to the package object
596 * buffer_size_needed - u32 pointer of the size buffer
597 * needed to properly return the
598 * parsed data
600 * RETURN: Status
602 * DESCRIPTION: Given a package representing a PCI routing table, this
603 * calculates the size of the corresponding linked list of
604 * descriptions.
606 ******************************************************************************/
608 acpi_status
609 acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
610 acpi_size * buffer_size_needed)
612 u32 number_of_elements;
613 acpi_size temp_size_needed = 0;
614 union acpi_operand_object **top_object_list;
615 u32 index;
616 union acpi_operand_object *package_element;
617 union acpi_operand_object **sub_object_list;
618 u8 name_found;
619 u32 table_index;
621 ACPI_FUNCTION_TRACE(rs_get_pci_routing_table_length);
623 number_of_elements = package_object->package.count;
626 * Calculate the size of the return buffer.
627 * The base size is the number of elements * the sizes of the
628 * structures. Additional space for the strings is added below.
629 * The minus one is to subtract the size of the u8 Source[1]
630 * member because it is added below.
632 * But each PRT_ENTRY structure has a pointer to a string and
633 * the size of that string must be found.
635 top_object_list = package_object->package.elements;
637 for (index = 0; index < number_of_elements; index++) {
639 /* Dereference the subpackage */
641 package_element = *top_object_list;
643 /* We must have a valid Package object */
645 if (!package_element ||
646 (package_element->common.type != ACPI_TYPE_PACKAGE)) {
647 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
651 * The sub_object_list will now point to an array of the
652 * four IRQ elements: Address, Pin, Source and source_index
654 sub_object_list = package_element->package.elements;
656 /* Scan the irq_table_elements for the Source Name String */
658 name_found = FALSE;
660 for (table_index = 0;
661 table_index < package_element->package.count
662 && !name_found; table_index++) {
663 if (*sub_object_list && /* Null object allowed */
664 ((ACPI_TYPE_STRING ==
665 (*sub_object_list)->common.type) ||
666 ((ACPI_TYPE_LOCAL_REFERENCE ==
667 (*sub_object_list)->common.type) &&
668 ((*sub_object_list)->reference.class ==
669 ACPI_REFCLASS_NAME)))) {
670 name_found = TRUE;
671 } else {
672 /* Look at the next element */
674 sub_object_list++;
678 temp_size_needed += (sizeof(struct acpi_pci_routing_table) - 4);
680 /* Was a String type found? */
682 if (name_found) {
683 if ((*sub_object_list)->common.type == ACPI_TYPE_STRING) {
685 * The length String.Length field does not include the
686 * terminating NULL, add 1
688 temp_size_needed += ((acpi_size)
689 (*sub_object_list)->string.
690 length + 1);
691 } else {
692 temp_size_needed += acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
694 } else {
696 * If no name was found, then this is a NULL, which is
697 * translated as a u32 zero.
699 temp_size_needed += sizeof(u32);
702 /* Round up the size since each element must be aligned */
704 temp_size_needed = ACPI_ROUND_UP_TO_64BIT(temp_size_needed);
706 /* Point to the next union acpi_operand_object */
708 top_object_list++;
712 * Add an extra element to the end of the list, essentially a
713 * NULL terminator
715 *buffer_size_needed =
716 temp_size_needed + sizeof(struct acpi_pci_routing_table);
717 return_ACPI_STATUS(AE_OK);