Linux 4.1.16
[linux/fpc-iii.git] / drivers / ata / acard-ahci.c
blob12489ce863c4bf06c06a38aa182124785346e365
2 /*
3 * acard-ahci.c - ACard AHCI SATA support
5 * Maintained by: Tejun Heo <tj@kernel.org>
6 * Please ALWAYS copy linux-ide@vger.kernel.org
7 * on emails.
9 * Copyright 2010 Red Hat, Inc.
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2, or (at your option)
15 * any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; see the file COPYING. If not, write to
24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
27 * libata documentation is available via 'make {ps|pdf}docs',
28 * as Documentation/DocBook/libata.*
30 * AHCI hardware documentation:
31 * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
32 * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
36 #include <linux/kernel.h>
37 #include <linux/module.h>
38 #include <linux/pci.h>
39 #include <linux/blkdev.h>
40 #include <linux/delay.h>
41 #include <linux/interrupt.h>
42 #include <linux/dma-mapping.h>
43 #include <linux/device.h>
44 #include <linux/dmi.h>
45 #include <linux/gfp.h>
46 #include <scsi/scsi_host.h>
47 #include <scsi/scsi_cmnd.h>
48 #include <linux/libata.h>
49 #include "ahci.h"
51 #define DRV_NAME "acard-ahci"
52 #define DRV_VERSION "1.0"
55 Received FIS structure limited to 80h.
58 #define ACARD_AHCI_RX_FIS_SZ 128
60 enum {
61 AHCI_PCI_BAR = 5,
64 enum board_ids {
65 board_acard_ahci,
68 struct acard_sg {
69 __le32 addr;
70 __le32 addr_hi;
71 __le32 reserved;
72 __le32 size; /* bit 31 (EOT) max==0x10000 (64k) */
75 static void acard_ahci_qc_prep(struct ata_queued_cmd *qc);
76 static bool acard_ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
77 static int acard_ahci_port_start(struct ata_port *ap);
78 static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
80 #ifdef CONFIG_PM_SLEEP
81 static int acard_ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
82 static int acard_ahci_pci_device_resume(struct pci_dev *pdev);
83 #endif
85 static struct scsi_host_template acard_ahci_sht = {
86 AHCI_SHT("acard-ahci"),
89 static struct ata_port_operations acard_ops = {
90 .inherits = &ahci_ops,
91 .qc_prep = acard_ahci_qc_prep,
92 .qc_fill_rtf = acard_ahci_qc_fill_rtf,
93 .port_start = acard_ahci_port_start,
96 #define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
98 static const struct ata_port_info acard_ahci_port_info[] = {
99 [board_acard_ahci] =
101 AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ),
102 .flags = AHCI_FLAG_COMMON,
103 .pio_mask = ATA_PIO4,
104 .udma_mask = ATA_UDMA6,
105 .port_ops = &acard_ops,
109 static const struct pci_device_id acard_ahci_pci_tbl[] = {
110 /* ACard */
111 { PCI_VDEVICE(ARTOP, 0x000d), board_acard_ahci }, /* ATP8620 */
113 { } /* terminate list */
116 static struct pci_driver acard_ahci_pci_driver = {
117 .name = DRV_NAME,
118 .id_table = acard_ahci_pci_tbl,
119 .probe = acard_ahci_init_one,
120 .remove = ata_pci_remove_one,
121 #ifdef CONFIG_PM_SLEEP
122 .suspend = acard_ahci_pci_device_suspend,
123 .resume = acard_ahci_pci_device_resume,
124 #endif
127 #ifdef CONFIG_PM_SLEEP
128 static int acard_ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
130 struct ata_host *host = pci_get_drvdata(pdev);
131 struct ahci_host_priv *hpriv = host->private_data;
132 void __iomem *mmio = hpriv->mmio;
133 u32 ctl;
135 if (mesg.event & PM_EVENT_SUSPEND &&
136 hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
137 dev_err(&pdev->dev,
138 "BIOS update required for suspend/resume\n");
139 return -EIO;
142 if (mesg.event & PM_EVENT_SLEEP) {
143 /* AHCI spec rev1.1 section 8.3.3:
144 * Software must disable interrupts prior to requesting a
145 * transition of the HBA to D3 state.
147 ctl = readl(mmio + HOST_CTL);
148 ctl &= ~HOST_IRQ_EN;
149 writel(ctl, mmio + HOST_CTL);
150 readl(mmio + HOST_CTL); /* flush */
153 return ata_pci_device_suspend(pdev, mesg);
156 static int acard_ahci_pci_device_resume(struct pci_dev *pdev)
158 struct ata_host *host = pci_get_drvdata(pdev);
159 int rc;
161 rc = ata_pci_device_do_resume(pdev);
162 if (rc)
163 return rc;
165 if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
166 rc = ahci_reset_controller(host);
167 if (rc)
168 return rc;
170 ahci_init_controller(host);
173 ata_host_resume(host);
175 return 0;
177 #endif
179 static int acard_ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
181 int rc;
183 if (using_dac &&
184 !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
185 rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
186 if (rc) {
187 rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
188 if (rc) {
189 dev_err(&pdev->dev,
190 "64-bit DMA enable failed\n");
191 return rc;
194 } else {
195 rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
196 if (rc) {
197 dev_err(&pdev->dev, "32-bit DMA enable failed\n");
198 return rc;
200 rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
201 if (rc) {
202 dev_err(&pdev->dev,
203 "32-bit consistent DMA enable failed\n");
204 return rc;
207 return 0;
210 static void acard_ahci_pci_print_info(struct ata_host *host)
212 struct pci_dev *pdev = to_pci_dev(host->dev);
213 u16 cc;
214 const char *scc_s;
216 pci_read_config_word(pdev, 0x0a, &cc);
217 if (cc == PCI_CLASS_STORAGE_IDE)
218 scc_s = "IDE";
219 else if (cc == PCI_CLASS_STORAGE_SATA)
220 scc_s = "SATA";
221 else if (cc == PCI_CLASS_STORAGE_RAID)
222 scc_s = "RAID";
223 else
224 scc_s = "unknown";
226 ahci_print_info(host, scc_s);
229 static unsigned int acard_ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
231 struct scatterlist *sg;
232 struct acard_sg *acard_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
233 unsigned int si, last_si = 0;
235 VPRINTK("ENTER\n");
238 * Next, the S/G list.
240 for_each_sg(qc->sg, sg, qc->n_elem, si) {
241 dma_addr_t addr = sg_dma_address(sg);
242 u32 sg_len = sg_dma_len(sg);
245 * ACard note:
246 * We must set an end-of-table (EOT) bit,
247 * and the segment cannot exceed 64k (0x10000)
249 acard_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
250 acard_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
251 acard_sg[si].size = cpu_to_le32(sg_len);
252 last_si = si;
255 acard_sg[last_si].size |= cpu_to_le32(1 << 31); /* set EOT */
257 return si;
260 static void acard_ahci_qc_prep(struct ata_queued_cmd *qc)
262 struct ata_port *ap = qc->ap;
263 struct ahci_port_priv *pp = ap->private_data;
264 int is_atapi = ata_is_atapi(qc->tf.protocol);
265 void *cmd_tbl;
266 u32 opts;
267 const u32 cmd_fis_len = 5; /* five dwords */
268 unsigned int n_elem;
271 * Fill in command table information. First, the header,
272 * a SATA Register - Host to Device command FIS.
274 cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
276 ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
277 if (is_atapi) {
278 memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
279 memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
282 n_elem = 0;
283 if (qc->flags & ATA_QCFLAG_DMAMAP)
284 n_elem = acard_ahci_fill_sg(qc, cmd_tbl);
287 * Fill in command slot information.
289 * ACard note: prd table length not filled in
291 opts = cmd_fis_len | (qc->dev->link->pmp << 12);
292 if (qc->tf.flags & ATA_TFLAG_WRITE)
293 opts |= AHCI_CMD_WRITE;
294 if (is_atapi)
295 opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
297 ahci_fill_cmd_slot(pp, qc->tag, opts);
300 static bool acard_ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
302 struct ahci_port_priv *pp = qc->ap->private_data;
303 u8 *rx_fis = pp->rx_fis;
305 if (pp->fbs_enabled)
306 rx_fis += qc->dev->link->pmp * ACARD_AHCI_RX_FIS_SZ;
309 * After a successful execution of an ATA PIO data-in command,
310 * the device doesn't send D2H Reg FIS to update the TF and
311 * the host should take TF and E_Status from the preceding PIO
312 * Setup FIS.
314 if (qc->tf.protocol == ATA_PROT_PIO && qc->dma_dir == DMA_FROM_DEVICE &&
315 !(qc->flags & ATA_QCFLAG_FAILED)) {
316 ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf);
317 qc->result_tf.command = (rx_fis + RX_FIS_PIO_SETUP)[15];
318 } else
319 ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf);
321 return true;
324 static int acard_ahci_port_start(struct ata_port *ap)
326 struct ahci_host_priv *hpriv = ap->host->private_data;
327 struct device *dev = ap->host->dev;
328 struct ahci_port_priv *pp;
329 void *mem;
330 dma_addr_t mem_dma;
331 size_t dma_sz, rx_fis_sz;
333 pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
334 if (!pp)
335 return -ENOMEM;
337 /* check FBS capability */
338 if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) {
339 void __iomem *port_mmio = ahci_port_base(ap);
340 u32 cmd = readl(port_mmio + PORT_CMD);
341 if (cmd & PORT_CMD_FBSCP)
342 pp->fbs_supported = true;
343 else if (hpriv->flags & AHCI_HFLAG_YES_FBS) {
344 dev_info(dev, "port %d can do FBS, forcing FBSCP\n",
345 ap->port_no);
346 pp->fbs_supported = true;
347 } else
348 dev_warn(dev, "port %d is not capable of FBS\n",
349 ap->port_no);
352 if (pp->fbs_supported) {
353 dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ;
354 rx_fis_sz = ACARD_AHCI_RX_FIS_SZ * 16;
355 } else {
356 dma_sz = AHCI_PORT_PRIV_DMA_SZ;
357 rx_fis_sz = ACARD_AHCI_RX_FIS_SZ;
360 mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL);
361 if (!mem)
362 return -ENOMEM;
363 memset(mem, 0, dma_sz);
366 * First item in chunk of DMA memory: 32-slot command table,
367 * 32 bytes each in size
369 pp->cmd_slot = mem;
370 pp->cmd_slot_dma = mem_dma;
372 mem += AHCI_CMD_SLOT_SZ;
373 mem_dma += AHCI_CMD_SLOT_SZ;
376 * Second item: Received-FIS area
378 pp->rx_fis = mem;
379 pp->rx_fis_dma = mem_dma;
381 mem += rx_fis_sz;
382 mem_dma += rx_fis_sz;
385 * Third item: data area for storing a single command
386 * and its scatter-gather table
388 pp->cmd_tbl = mem;
389 pp->cmd_tbl_dma = mem_dma;
392 * Save off initial list of interrupts to be enabled.
393 * This could be changed later
395 pp->intr_mask = DEF_PORT_IRQ;
397 ap->private_data = pp;
399 /* engage engines, captain */
400 return ahci_port_resume(ap);
403 static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
405 unsigned int board_id = ent->driver_data;
406 struct ata_port_info pi = acard_ahci_port_info[board_id];
407 const struct ata_port_info *ppi[] = { &pi, NULL };
408 struct device *dev = &pdev->dev;
409 struct ahci_host_priv *hpriv;
410 struct ata_host *host;
411 int n_ports, i, rc;
413 VPRINTK("ENTER\n");
415 WARN_ON((int)ATA_MAX_QUEUE > AHCI_MAX_CMDS);
417 ata_print_version_once(&pdev->dev, DRV_VERSION);
419 /* acquire resources */
420 rc = pcim_enable_device(pdev);
421 if (rc)
422 return rc;
424 /* AHCI controllers often implement SFF compatible interface.
425 * Grab all PCI BARs just in case.
427 rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
428 if (rc == -EBUSY)
429 pcim_pin_device(pdev);
430 if (rc)
431 return rc;
433 hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
434 if (!hpriv)
435 return -ENOMEM;
436 hpriv->flags |= (unsigned long)pi.private_data;
438 if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
439 pci_enable_msi(pdev);
441 hpriv->mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
443 /* save initial config */
444 ahci_save_initial_config(&pdev->dev, hpriv);
446 /* prepare host */
447 if (hpriv->cap & HOST_CAP_NCQ)
448 pi.flags |= ATA_FLAG_NCQ;
450 if (hpriv->cap & HOST_CAP_PMP)
451 pi.flags |= ATA_FLAG_PMP;
453 ahci_set_em_messages(hpriv, &pi);
455 /* CAP.NP sometimes indicate the index of the last enabled
456 * port, at other times, that of the last possible port, so
457 * determining the maximum port number requires looking at
458 * both CAP.NP and port_map.
460 n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
462 host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
463 if (!host)
464 return -ENOMEM;
465 host->private_data = hpriv;
467 if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
468 host->flags |= ATA_HOST_PARALLEL_SCAN;
469 else
470 printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
472 for (i = 0; i < host->n_ports; i++) {
473 struct ata_port *ap = host->ports[i];
475 ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
476 ata_port_pbar_desc(ap, AHCI_PCI_BAR,
477 0x100 + ap->port_no * 0x80, "port");
479 /* set initial link pm policy */
481 ap->pm_policy = NOT_AVAILABLE;
483 /* disabled/not-implemented port */
484 if (!(hpriv->port_map & (1 << i)))
485 ap->ops = &ata_dummy_port_ops;
488 /* initialize adapter */
489 rc = acard_ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
490 if (rc)
491 return rc;
493 rc = ahci_reset_controller(host);
494 if (rc)
495 return rc;
497 ahci_init_controller(host);
498 acard_ahci_pci_print_info(host);
500 pci_set_master(pdev);
501 return ahci_host_activate(host, pdev->irq, &acard_ahci_sht);
504 module_pci_driver(acard_ahci_pci_driver);
506 MODULE_AUTHOR("Jeff Garzik");
507 MODULE_DESCRIPTION("ACard AHCI SATA low-level driver");
508 MODULE_LICENSE("GPL");
509 MODULE_DEVICE_TABLE(pci, acard_ahci_pci_tbl);
510 MODULE_VERSION(DRV_VERSION);