?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 4.1.16
[linux/fpc-iii.git] / drivers / edac / i82975x_edac.c
blob35ab66c623a3061e4ab03de7221b4852fbd59f63
1 /*
2 * Intel 82975X Memory Controller kernel module
3 * (C) 2007 aCarLab (India) Pvt. Ltd. (http://acarlab.com)
4 * (C) 2007 jetzbroadband (http://jetzbroadband.com)
5 * This file may be distributed under the terms of the
6 * GNU General Public License.
7 *
8 * Written by Arvind R.
9 * Copied from i82875p_edac.c source:
10 */
11
12 #include <linux/module.h>
13 #include <linux/init.h>
14 #include <linux/pci.h>
15 #include <linux/pci_ids.h>
16 #include <linux/edac.h>
17 #include "edac_core.h"
18
19 #define I82975X_REVISION " Ver: 1.0.0"
20 #define EDAC_MOD_STR "i82975x_edac"
21
22 #define i82975x_printk(level, fmt, arg...) \
23 edac_printk(level, "i82975x", fmt, ##arg)
24
25 #define i82975x_mc_printk(mci, level, fmt, arg...) \
26 edac_mc_chipset_printk(mci, level, "i82975x", fmt, ##arg)
27
28 #ifndef PCI_DEVICE_ID_INTEL_82975_0
29 #define PCI_DEVICE_ID_INTEL_82975_0 0x277c
30 #endif /* PCI_DEVICE_ID_INTEL_82975_0 */
31
32 #define I82975X_NR_DIMMS 8
33 #define I82975X_NR_CSROWS(nr_chans) (I82975X_NR_DIMMS / (nr_chans))
34
35 /* Intel 82975X register addresses - device 0 function 0 - DRAM Controller */
36 #define I82975X_EAP 0x58 /* Dram Error Address Pointer (32b)
37 *
38 * 31:7 128 byte cache-line address
39 * 6:1 reserved
40 * 0 0: CH0; 1: CH1
41 */
42
43 #define I82975X_DERRSYN 0x5c /* Dram Error SYNdrome (8b)
44 *
45 * 7:0 DRAM ECC Syndrome
46 */
47
48 #define I82975X_DES 0x5d /* Dram ERRor DeSTination (8b)
49 * 0h: Processor Memory Reads
50 * 1h:7h reserved
51 * More - See Page 65 of Intel DocSheet.
52 */
53
54 #define I82975X_ERRSTS 0xc8 /* Error Status Register (16b)
55 *
56 * 15:12 reserved
57 * 11 Thermal Sensor Event
58 * 10 reserved
59 * 9 non-DRAM lock error (ndlock)
60 * 8 Refresh Timeout
61 * 7:2 reserved
62 * 1 ECC UE (multibit DRAM error)
63 * 0 ECC CE (singlebit DRAM error)
64 */
65
66 /* Error Reporting is supported by 3 mechanisms:
67 1. DMI SERR generation ( ERRCMD )
68 2. SMI DMI generation ( SMICMD )
69 3. SCI DMI generation ( SCICMD )
70 NOTE: Only ONE of the three must be enabled
71 */
72 #define I82975X_ERRCMD 0xca /* Error Command (16b)
73 *
74 * 15:12 reserved
75 * 11 Thermal Sensor Event
76 * 10 reserved
77 * 9 non-DRAM lock error (ndlock)
78 * 8 Refresh Timeout
79 * 7:2 reserved
80 * 1 ECC UE (multibit DRAM error)
81 * 0 ECC CE (singlebit DRAM error)
82 */
83
84 #define I82975X_SMICMD 0xcc /* Error Command (16b)
85 *
86 * 15:2 reserved
87 * 1 ECC UE (multibit DRAM error)
88 * 0 ECC CE (singlebit DRAM error)
89 */
90
91 #define I82975X_SCICMD 0xce /* Error Command (16b)
92 *
93 * 15:2 reserved
94 * 1 ECC UE (multibit DRAM error)
95 * 0 ECC CE (singlebit DRAM error)
96 */
97
98 #define I82975X_XEAP 0xfc /* Extended Dram Error Address Pointer (8b)
99 *
100 * 7:1 reserved
101 * 0 Bit32 of the Dram Error Address
102 */
103
104 #define I82975X_MCHBAR 0x44 /*
105 *
106 * 31:14 Base Addr of 16K memory-mapped
107 * configuration space
108 * 13:1 reserverd
109 * 0 mem-mapped config space enable
110 */
111
112 /* NOTE: Following addresses have to indexed using MCHBAR offset (44h, 32b) */
113 /* Intel 82975x memory mapped register space */
114
115 #define I82975X_DRB_SHIFT 25 /* fixed 32MiB grain */
116
117 #define I82975X_DRB 0x100 /* DRAM Row Boundary (8b x 8)
118 *
119 * 7 set to 1 in highest DRB of
120 * channel if 4GB in ch.
121 * 6:2 upper boundary of rank in
122 * 32MB grains
123 * 1:0 set to 0
124 */
125 #define I82975X_DRB_CH0R0 0x100
126 #define I82975X_DRB_CH0R1 0x101
127 #define I82975X_DRB_CH0R2 0x102
128 #define I82975X_DRB_CH0R3 0x103
129 #define I82975X_DRB_CH1R0 0x180
130 #define I82975X_DRB_CH1R1 0x181
131 #define I82975X_DRB_CH1R2 0x182
132 #define I82975X_DRB_CH1R3 0x183
133
134
135 #define I82975X_DRA 0x108 /* DRAM Row Attribute (4b x 8)
136 * defines the PAGE SIZE to be used
137 * for the rank
138 * 7 reserved
139 * 6:4 row attr of odd rank, i.e. 1
140 * 3 reserved
141 * 2:0 row attr of even rank, i.e. 0
142 *
143 * 000 = unpopulated
144 * 001 = reserved
145 * 010 = 4KiB
146 * 011 = 8KiB
147 * 100 = 16KiB
148 * others = reserved
149 */
150 #define I82975X_DRA_CH0R01 0x108
151 #define I82975X_DRA_CH0R23 0x109
152 #define I82975X_DRA_CH1R01 0x188
153 #define I82975X_DRA_CH1R23 0x189
154
155
156 #define I82975X_BNKARC 0x10e /* Type of device in each rank - Bank Arch (16b)
157 *
158 * 15:8 reserved
159 * 7:6 Rank 3 architecture
160 * 5:4 Rank 2 architecture
161 * 3:2 Rank 1 architecture
162 * 1:0 Rank 0 architecture
163 *
164 * 00 => 4 banks
165 * 01 => 8 banks
166 */
167 #define I82975X_C0BNKARC 0x10e
168 #define I82975X_C1BNKARC 0x18e
169
170
171
172 #define I82975X_DRC 0x120 /* DRAM Controller Mode0 (32b)
173 *
174 * 31:30 reserved
175 * 29 init complete
176 * 28:11 reserved, according to Intel
177 * 22:21 number of channels
178 * 00=1 01=2 in 82875
179 * seems to be ECC mode
180 * bits in 82975 in Asus
181 * P5W
182 * 19:18 Data Integ Mode
183 * 00=none 01=ECC in 82875
184 * 10:8 refresh mode
185 * 7 reserved
186 * 6:4 mode select
187 * 3:2 reserved
188 * 1:0 DRAM type 10=Second Revision
189 * DDR2 SDRAM
190 * 00, 01, 11 reserved
191 */
192 #define I82975X_DRC_CH0M0 0x120
193 #define I82975X_DRC_CH1M0 0x1A0
194
195
196 #define I82975X_DRC_M1 0x124 /* DRAM Controller Mode1 (32b)
197 * 31 0=Standard Address Map
198 * 1=Enhanced Address Map
199 * 30:0 reserved
200 */
201
202 #define I82975X_DRC_CH0M1 0x124
203 #define I82975X_DRC_CH1M1 0x1A4
204
205 enum i82975x_chips {
206 I82975X = 0,
207 };
208
209 struct i82975x_pvt {
210 void __iomem *mch_window;
211 };
212
213 struct i82975x_dev_info {
214 const char *ctl_name;
215 };
216
217 struct i82975x_error_info {
218 u16 errsts;
219 u32 eap;
220 u8 des;
221 u8 derrsyn;
222 u16 errsts2;
223 u8 chan; /* the channel is bit 0 of EAP */
224 u8 xeap; /* extended eap bit */
225 };
226
227 static const struct i82975x_dev_info i82975x_devs[] = {
228 [I82975X] = {
229 .ctl_name = "i82975x"
230 },
231 };
232
233 static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has
234 * already registered driver
235 */
236
237 static int i82975x_registered = 1;
238
239 static void i82975x_get_error_info(struct mem_ctl_info *mci,
240 struct i82975x_error_info *info)
241 {
242 struct pci_dev *pdev;
243
244 pdev = to_pci_dev(mci->pdev);
245
246 /*
247 * This is a mess because there is no atomic way to read all the
248 * registers at once and the registers can transition from CE being
249 * overwritten by UE.
250 */
251 pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts);
252 pci_read_config_dword(pdev, I82975X_EAP, &info->eap);
253 pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap);
254 pci_read_config_byte(pdev, I82975X_DES, &info->des);
255 pci_read_config_byte(pdev, I82975X_DERRSYN, &info->derrsyn);
256 pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts2);
257
258 pci_write_bits16(pdev, I82975X_ERRSTS, 0x0003, 0x0003);
259
260 /*
261 * If the error is the same then we can for both reads then
262 * the first set of reads is valid. If there is a change then
263 * there is a CE no info and the second set of reads is valid
264 * and should be UE info.
265 */
266 if (!(info->errsts2 & 0x0003))
267 return;
268
269 if ((info->errsts ^ info->errsts2) & 0x0003) {
270 pci_read_config_dword(pdev, I82975X_EAP, &info->eap);
271 pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap);
272 pci_read_config_byte(pdev, I82975X_DES, &info->des);
273 pci_read_config_byte(pdev, I82975X_DERRSYN,
274 &info->derrsyn);
275 }
276 }
277
278 static int i82975x_process_error_info(struct mem_ctl_info *mci,
279 struct i82975x_error_info *info, int handle_errors)
280 {
281 int row, chan;
282 unsigned long offst, page;
283
284 if (!(info->errsts2 & 0x0003))
285 return 0;
286
287 if (!handle_errors)
288 return 1;
289
290 if ((info->errsts ^ info->errsts2) & 0x0003) {
291 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
292 -1, -1, -1, "UE overwrote CE", "");
293 info->errsts = info->errsts2;
294 }
295
296 page = (unsigned long) info->eap;
297 page >>= 1;
298 if (info->xeap & 1)
299 page |= 0x80000000;
300 page >>= (PAGE_SHIFT - 1);
301 row = edac_mc_find_csrow_by_page(mci, page);
302
303 if (row == -1) {
304 i82975x_mc_printk(mci, KERN_ERR, "error processing EAP:\n"
305 "\tXEAP=%u\n"
306 "\t EAP=0x%08x\n"
307 "\tPAGE=0x%08x\n",
308 (info->xeap & 1) ? 1 : 0, info->eap, (unsigned int) page);
309 return 0;
310 }
311 chan = (mci->csrows[row]->nr_channels == 1) ? 0 : info->eap & 1;
312 offst = info->eap
313 & ((1 << PAGE_SHIFT) -
314 (1 << mci->csrows[row]->channels[chan]->dimm->grain));
315
316 if (info->errsts & 0x0002)
317 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
318 page, offst, 0,
319 row, -1, -1,
320 "i82975x UE", "");
321 else
322 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
323 page, offst, info->derrsyn,
324 row, chan ? chan : 0, -1,
325 "i82975x CE", "");
326
327 return 1;
328 }
329
330 static void i82975x_check(struct mem_ctl_info *mci)
331 {
332 struct i82975x_error_info info;
333
334 edac_dbg(1, "MC%d\n", mci->mc_idx);
335 i82975x_get_error_info(mci, &info);
336 i82975x_process_error_info(mci, &info, 1);
337 }
338
339 /* Return 1 if dual channel mode is active. Else return 0. */
340 static int dual_channel_active(void __iomem *mch_window)
341 {
342 /*
343 * We treat interleaved-symmetric configuration as dual-channel - EAP's
344 * bit-0 giving the channel of the error location.
345 *
346 * All other configurations are treated as single channel - the EAP's
347 * bit-0 will resolve ok in symmetric area of mixed
348 * (symmetric/asymmetric) configurations
349 */
350 u8 drb[4][2];
351 int row;
352 int dualch;
353
354 for (dualch = 1, row = 0; dualch && (row < 4); row++) {
355 drb[row][0] = readb(mch_window + I82975X_DRB + row);
356 drb[row][1] = readb(mch_window + I82975X_DRB + row + 0x80);
357 dualch = dualch && (drb[row][0] == drb[row][1]);
358 }
359 return dualch;
360 }
361
362 static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank)
363 {
364 /*
365 * ECC is possible on i92975x ONLY with DEV_X8
366 */
367 return DEV_X8;
368 }
369
370 static void i82975x_init_csrows(struct mem_ctl_info *mci,
371 struct pci_dev *pdev, void __iomem *mch_window)
372 {
373 struct csrow_info *csrow;
374 unsigned long last_cumul_size;
375 u8 value;
376 u32 cumul_size, nr_pages;
377 int index, chan;
378 struct dimm_info *dimm;
379 enum dev_type dtype;
380
381 last_cumul_size = 0;
382
383 /*
384 * 82875 comment:
385 * The dram row boundary (DRB) reg values are boundary address
386 * for each DRAM row with a granularity of 32 or 64MB (single/dual
387 * channel operation). DRB regs are cumulative; therefore DRB7 will
388 * contain the total memory contained in all rows.
389 *
390 */
391
392 for (index = 0; index < mci->nr_csrows; index++) {
393 csrow = mci->csrows[index];
394
395 value = readb(mch_window + I82975X_DRB + index +
396 ((index >= 4) ? 0x80 : 0));
397 cumul_size = value;
398 cumul_size <<= (I82975X_DRB_SHIFT - PAGE_SHIFT);
399 /*
400 * Adjust cumul_size w.r.t number of channels
401 *
402 */
403 if (csrow->nr_channels > 1)
404 cumul_size <<= 1;
405 edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size);
406
407 nr_pages = cumul_size - last_cumul_size;
408 if (!nr_pages)
409 continue;
410
411 /*
412 * Initialise dram labels
413 * index values:
414 * [0-7] for single-channel; i.e. csrow->nr_channels = 1
415 * [0-3] for dual-channel; i.e. csrow->nr_channels = 2
416 */
417 dtype = i82975x_dram_type(mch_window, index);
418 for (chan = 0; chan < csrow->nr_channels; chan++) {
419 dimm = mci->csrows[index]->channels[chan]->dimm;
420
421 dimm->nr_pages = nr_pages / csrow->nr_channels;
422
423 snprintf(csrow->channels[chan]->dimm->label, EDAC_MC_LABEL_LEN, "DIMM %c%d",
424 (chan == 0) ? 'A' : 'B',
425 index);
426 dimm->grain = 1 << 7; /* 128Byte cache-line resolution */
427 dimm->dtype = i82975x_dram_type(mch_window, index);
428 dimm->mtype = MEM_DDR2; /* I82975x supports only DDR2 */
429 dimm->edac_mode = EDAC_SECDED; /* only supported */
430 }
431
432 csrow->first_page = last_cumul_size;
433 csrow->last_page = cumul_size - 1;
434 last_cumul_size = cumul_size;
435 }
436 }
437
438 /* #define i82975x_DEBUG_IOMEM */
439
440 #ifdef i82975x_DEBUG_IOMEM
441 static void i82975x_print_dram_timings(void __iomem *mch_window)
442 {
443 /*
444 * The register meanings are from Intel specs;
445 * (shows 13-5-5-5 for 800-DDR2)
446 * Asus P5W Bios reports 15-5-4-4
447 * What's your religion?
448 */
449 static const int caslats[4] = { 5, 4, 3, 6 };
450 u32 dtreg[2];
451
452 dtreg[0] = readl(mch_window + 0x114);
453 dtreg[1] = readl(mch_window + 0x194);
454 i82975x_printk(KERN_INFO, "DRAM Timings : Ch0 Ch1\n"
455 " RAS Active Min = %d %d\n"
456 " CAS latency = %d %d\n"
457 " RAS to CAS = %d %d\n"
458 " RAS precharge = %d %d\n",
459 (dtreg[0] >> 19 ) & 0x0f,
460 (dtreg[1] >> 19) & 0x0f,
461 caslats[(dtreg[0] >> 8) & 0x03],
462 caslats[(dtreg[1] >> 8) & 0x03],
463 ((dtreg[0] >> 4) & 0x07) + 2,
464 ((dtreg[1] >> 4) & 0x07) + 2,
465 (dtreg[0] & 0x07) + 2,
466 (dtreg[1] & 0x07) + 2
467 );
468
469 }
470 #endif
471
472 static int i82975x_probe1(struct pci_dev *pdev, int dev_idx)
473 {
474 int rc = -ENODEV;
475 struct mem_ctl_info *mci;
476 struct edac_mc_layer layers[2];
477 struct i82975x_pvt *pvt;
478 void __iomem *mch_window;
479 u32 mchbar;
480 u32 drc[2];
481 struct i82975x_error_info discard;
482 int chans;
483 #ifdef i82975x_DEBUG_IOMEM
484 u8 c0drb[4];
485 u8 c1drb[4];
486 #endif
487
488 edac_dbg(0, "\n");
489
490 pci_read_config_dword(pdev, I82975X_MCHBAR, &mchbar);
491 if (!(mchbar & 1)) {
492 edac_dbg(3, "failed, MCHBAR disabled!\n");
493 goto fail0;
494 }
495 mchbar &= 0xffffc000; /* bits 31:14 used for 16K window */
496 mch_window = ioremap_nocache(mchbar, 0x1000);
497
498 #ifdef i82975x_DEBUG_IOMEM
499 i82975x_printk(KERN_INFO, "MCHBAR real = %0x, remapped = %p\n",
500 mchbar, mch_window);
501
502 c0drb[0] = readb(mch_window + I82975X_DRB_CH0R0);
503 c0drb[1] = readb(mch_window + I82975X_DRB_CH0R1);
504 c0drb[2] = readb(mch_window + I82975X_DRB_CH0R2);
505 c0drb[3] = readb(mch_window + I82975X_DRB_CH0R3);
506 c1drb[0] = readb(mch_window + I82975X_DRB_CH1R0);
507 c1drb[1] = readb(mch_window + I82975X_DRB_CH1R1);
508 c1drb[2] = readb(mch_window + I82975X_DRB_CH1R2);
509 c1drb[3] = readb(mch_window + I82975X_DRB_CH1R3);
510 i82975x_printk(KERN_INFO, "DRBCH0R0 = 0x%02x\n", c0drb[0]);
511 i82975x_printk(KERN_INFO, "DRBCH0R1 = 0x%02x\n", c0drb[1]);
512 i82975x_printk(KERN_INFO, "DRBCH0R2 = 0x%02x\n", c0drb[2]);
513 i82975x_printk(KERN_INFO, "DRBCH0R3 = 0x%02x\n", c0drb[3]);
514 i82975x_printk(KERN_INFO, "DRBCH1R0 = 0x%02x\n", c1drb[0]);
515 i82975x_printk(KERN_INFO, "DRBCH1R1 = 0x%02x\n", c1drb[1]);
516 i82975x_printk(KERN_INFO, "DRBCH1R2 = 0x%02x\n", c1drb[2]);
517 i82975x_printk(KERN_INFO, "DRBCH1R3 = 0x%02x\n", c1drb[3]);
518 #endif
519
520 drc[0] = readl(mch_window + I82975X_DRC_CH0M0);
521 drc[1] = readl(mch_window + I82975X_DRC_CH1M0);
522 #ifdef i82975x_DEBUG_IOMEM
523 i82975x_printk(KERN_INFO, "DRC_CH0 = %0x, %s\n", drc[0],
524 ((drc[0] >> 21) & 3) == 1 ?
525 "ECC enabled" : "ECC disabled");
526 i82975x_printk(KERN_INFO, "DRC_CH1 = %0x, %s\n", drc[1],
527 ((drc[1] >> 21) & 3) == 1 ?
528 "ECC enabled" : "ECC disabled");
529
530 i82975x_printk(KERN_INFO, "C0 BNKARC = %0x\n",
531 readw(mch_window + I82975X_C0BNKARC));
532 i82975x_printk(KERN_INFO, "C1 BNKARC = %0x\n",
533 readw(mch_window + I82975X_C1BNKARC));
534 i82975x_print_dram_timings(mch_window);
535 goto fail1;
536 #endif
537 if (!(((drc[0] >> 21) & 3) == 1 || ((drc[1] >> 21) & 3) == 1)) {
538 i82975x_printk(KERN_INFO, "ECC disabled on both channels.\n");
539 goto fail1;
540 }
541
542 chans = dual_channel_active(mch_window) + 1;
543
544 /* assuming only one controller, index thus is 0 */
545 layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
546 layers[0].size = I82975X_NR_DIMMS;
547 layers[0].is_virt_csrow = true;
548 layers[1].type = EDAC_MC_LAYER_CHANNEL;
549 layers[1].size = I82975X_NR_CSROWS(chans);
550 layers[1].is_virt_csrow = false;
551 mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
552 if (!mci) {
553 rc = -ENOMEM;
554 goto fail1;
555 }
556
557 edac_dbg(3, "init mci\n");
558 mci->pdev = &pdev->dev;
559 mci->mtype_cap = MEM_FLAG_DDR2;
560 mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
561 mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
562 mci->mod_name = EDAC_MOD_STR;
563 mci->mod_ver = I82975X_REVISION;
564 mci->ctl_name = i82975x_devs[dev_idx].ctl_name;
565 mci->dev_name = pci_name(pdev);
566 mci->edac_check = i82975x_check;
567 mci->ctl_page_to_phys = NULL;
568 edac_dbg(3, "init pvt\n");
569 pvt = (struct i82975x_pvt *) mci->pvt_info;
570 pvt->mch_window = mch_window;
571 i82975x_init_csrows(mci, pdev, mch_window);
572 mci->scrub_mode = SCRUB_HW_SRC;
573 i82975x_get_error_info(mci, &discard); /* clear counters */
574
575 /* finalize this instance of memory controller with edac core */
576 if (edac_mc_add_mc(mci)) {
577 edac_dbg(3, "failed edac_mc_add_mc()\n");
578 goto fail2;
579 }
580
581 /* get this far and it's successful */
582 edac_dbg(3, "success\n");
583 return 0;
584
585 fail2:
586 edac_mc_free(mci);
587
588 fail1:
589 iounmap(mch_window);
590 fail0:
591 return rc;
592 }
593
594 /* returns count (>= 0), or negative on error */
595 static int i82975x_init_one(struct pci_dev *pdev,
596 const struct pci_device_id *ent)
597 {
598 int rc;
599
600 edac_dbg(0, "\n");
601
602 if (pci_enable_device(pdev) < 0)
603 return -EIO;
604
605 rc = i82975x_probe1(pdev, ent->driver_data);
606
607 if (mci_pdev == NULL)
608 mci_pdev = pci_dev_get(pdev);
609
610 return rc;
611 }
612
613 static void i82975x_remove_one(struct pci_dev *pdev)
614 {
615 struct mem_ctl_info *mci;
616 struct i82975x_pvt *pvt;
617
618 edac_dbg(0, "\n");
619
620 mci = edac_mc_del_mc(&pdev->dev);
621 if (mci == NULL)
622 return;
623
624 pvt = mci->pvt_info;
625 if (pvt->mch_window)
626 iounmap( pvt->mch_window );
627
628 edac_mc_free(mci);
629 }
630
631 static const struct pci_device_id i82975x_pci_tbl[] = {
632 {
633 PCI_VEND_DEV(INTEL, 82975_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
634 I82975X
635 },
636 {
637 0,
638 } /* 0 terminated list. */
639 };
640
641 MODULE_DEVICE_TABLE(pci, i82975x_pci_tbl);
642
643 static struct pci_driver i82975x_driver = {
644 .name = EDAC_MOD_STR,
645 .probe = i82975x_init_one,
646 .remove = i82975x_remove_one,
647 .id_table = i82975x_pci_tbl,
648 };
649
650 static int __init i82975x_init(void)
651 {
652 int pci_rc;
653
654 edac_dbg(3, "\n");
655
656 /* Ensure that the OPSTATE is set correctly for POLL or NMI */
657 opstate_init();
658
659 pci_rc = pci_register_driver(&i82975x_driver);
660 if (pci_rc < 0)
661 goto fail0;
662
663 if (mci_pdev == NULL) {
664 mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
665 PCI_DEVICE_ID_INTEL_82975_0, NULL);
666
667 if (!mci_pdev) {
668 edac_dbg(0, "i82975x pci_get_device fail\n");
669 pci_rc = -ENODEV;
670 goto fail1;
671 }
672
673 pci_rc = i82975x_init_one(mci_pdev, i82975x_pci_tbl);
674
675 if (pci_rc < 0) {
676 edac_dbg(0, "i82975x init fail\n");
677 pci_rc = -ENODEV;
678 goto fail1;
679 }
680 }
681
682 return 0;
683
684 fail1:
685 pci_unregister_driver(&i82975x_driver);
686
687 fail0:
688 pci_dev_put(mci_pdev);
689 return pci_rc;
690 }
691
692 static void __exit i82975x_exit(void)
693 {
694 edac_dbg(3, "\n");
695
696 pci_unregister_driver(&i82975x_driver);
697
698 if (!i82975x_registered) {
699 i82975x_remove_one(mci_pdev);
700 pci_dev_put(mci_pdev);
701 }
702 }
703
704 module_init(i82975x_init);
705 module_exit(i82975x_exit);
706
707 MODULE_LICENSE("GPL");
708 MODULE_AUTHOR("Arvind R. <arvino55@gmail.com>");
709 MODULE_DESCRIPTION("MC support for Intel 82975 memory hub controllers");
710
711 module_param(edac_op_state, int, 0444);
712 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
Linux with added FPC-III support