?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 4.1.16
[linux/fpc-iii.git] / drivers / i2c / busses / i2c-sis5595.c
blob7d58a40faf2dc8713d6cad4662c7adadf6a0a8a6
1 /*
2 Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
3 Philip Edelbrock <phil@netroedge.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14 */
15
16 /* Note: we assume there can only be one SIS5595 with one SMBus interface */
17
18 /*
19 Note: all have mfr. ID 0x1039.
20 SUPPORTED PCI ID
21 5595 0008
22
23 Note: these chips contain a 0008 device which is incompatible with the
24 5595. We recognize these by the presence of the listed
25 "blacklist" PCI ID and refuse to load.
26
27 NOT SUPPORTED PCI ID BLACKLIST PCI ID
28 540 0008 0540
29 550 0008 0550
30 5513 0008 5511
31 5581 0008 5597
32 5582 0008 5597
33 5597 0008 5597
34 5598 0008 5597/5598
35 630 0008 0630
36 645 0008 0645
37 646 0008 0646
38 648 0008 0648
39 650 0008 0650
40 651 0008 0651
41 730 0008 0730
42 735 0008 0735
43 745 0008 0745
44 746 0008 0746
45 */
46
47 /* TO DO:
48 * Add Block Transfers (ugly, but supported by the adapter)
49 * Add adapter resets
50 */
51
52 #include <linux/kernel.h>
53 #include <linux/module.h>
54 #include <linux/delay.h>
55 #include <linux/pci.h>
56 #include <linux/ioport.h>
57 #include <linux/init.h>
58 #include <linux/i2c.h>
59 #include <linux/acpi.h>
60 #include <linux/io.h>
61
62 static int blacklist[] = {
63 PCI_DEVICE_ID_SI_540,
64 PCI_DEVICE_ID_SI_550,
65 PCI_DEVICE_ID_SI_630,
66 PCI_DEVICE_ID_SI_645,
67 PCI_DEVICE_ID_SI_646,
68 PCI_DEVICE_ID_SI_648,
69 PCI_DEVICE_ID_SI_650,
70 PCI_DEVICE_ID_SI_651,
71 PCI_DEVICE_ID_SI_730,
72 PCI_DEVICE_ID_SI_735,
73 PCI_DEVICE_ID_SI_745,
74 PCI_DEVICE_ID_SI_746,
75 PCI_DEVICE_ID_SI_5511, /* 5513 chip has the 0008 device but that ID
76 shows up in other chips so we use the 5511
77 ID for recognition */
78 PCI_DEVICE_ID_SI_5597,
79 PCI_DEVICE_ID_SI_5598,
80 0, /* terminates the list */
81 };
82
83 /* Length of ISA address segment */
84 #define SIS5595_EXTENT 8
85 /* SIS5595 SMBus registers */
86 #define SMB_STS_LO 0x00
87 #define SMB_STS_HI 0x01
88 #define SMB_CTL_LO 0x02
89 #define SMB_CTL_HI 0x03
90 #define SMB_ADDR 0x04
91 #define SMB_CMD 0x05
92 #define SMB_PCNT 0x06
93 #define SMB_CNT 0x07
94 #define SMB_BYTE 0x08
95 #define SMB_DEV 0x10
96 #define SMB_DB0 0x11
97 #define SMB_DB1 0x12
98 #define SMB_HAA 0x13
99
100 /* PCI Address Constants */
101 #define SMB_INDEX 0x38
102 #define SMB_DAT 0x39
103 #define SIS5595_ENABLE_REG 0x40
104 #define ACPI_BASE 0x90
105
106 /* Other settings */
107 #define MAX_TIMEOUT 500
108
109 /* SIS5595 constants */
110 #define SIS5595_QUICK 0x00
111 #define SIS5595_BYTE 0x02
112 #define SIS5595_BYTE_DATA 0x04
113 #define SIS5595_WORD_DATA 0x06
114 #define SIS5595_PROC_CALL 0x08
115 #define SIS5595_BLOCK_DATA 0x0A
116
117 /* insmod parameters */
118
119 /* If force_addr is set to anything different from 0, we forcibly enable
120 the device at the given address. */
121 static u16 force_addr;
122 module_param(force_addr, ushort, 0);
123 MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller");
124
125 static struct pci_driver sis5595_driver;
126 static unsigned short sis5595_base;
127 static struct pci_dev *sis5595_pdev;
128
129 static u8 sis5595_read(u8 reg)
130 {
131 outb(reg, sis5595_base + SMB_INDEX);
132 return inb(sis5595_base + SMB_DAT);
133 }
134
135 static void sis5595_write(u8 reg, u8 data)
136 {
137 outb(reg, sis5595_base + SMB_INDEX);
138 outb(data, sis5595_base + SMB_DAT);
139 }
140
141 static int sis5595_setup(struct pci_dev *SIS5595_dev)
142 {
143 u16 a;
144 u8 val;
145 int *i;
146 int retval;
147
148 /* Look for imposters */
149 for (i = blacklist; *i != 0; i++) {
150 struct pci_dev *dev;
151 dev = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL);
152 if (dev) {
153 dev_err(&SIS5595_dev->dev, "Looked for SIS5595 but found unsupported device %.4x\n", *i);
154 pci_dev_put(dev);
155 return -ENODEV;
156 }
157 }
158
159 /* Determine the address of the SMBus areas */
160 pci_read_config_word(SIS5595_dev, ACPI_BASE, &sis5595_base);
161 if (sis5595_base == 0 && force_addr == 0) {
162 dev_err(&SIS5595_dev->dev, "ACPI base address uninitialized - upgrade BIOS or use force_addr=0xaddr\n");
163 return -ENODEV;
164 }
165
166 if (force_addr)
167 sis5595_base = force_addr & ~(SIS5595_EXTENT - 1);
168 dev_dbg(&SIS5595_dev->dev, "ACPI Base address: %04x\n", sis5595_base);
169
170 /* NB: We grab just the two SMBus registers here, but this may still
171 * interfere with ACPI :-( */
172 retval = acpi_check_region(sis5595_base + SMB_INDEX, 2,
173 sis5595_driver.name);
174 if (retval)
175 return retval;
176
177 if (!request_region(sis5595_base + SMB_INDEX, 2,
178 sis5595_driver.name)) {
179 dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n",
180 sis5595_base + SMB_INDEX, sis5595_base + SMB_INDEX + 1);
181 return -ENODEV;
182 }
183
184 if (force_addr) {
185 dev_info(&SIS5595_dev->dev, "forcing ISA address 0x%04X\n", sis5595_base);
186 if (pci_write_config_word(SIS5595_dev, ACPI_BASE, sis5595_base)
187 != PCIBIOS_SUCCESSFUL)
188 goto error;
189 if (pci_read_config_word(SIS5595_dev, ACPI_BASE, &a)
190 != PCIBIOS_SUCCESSFUL)
191 goto error;
192 if ((a & ~(SIS5595_EXTENT - 1)) != sis5595_base) {
193 /* doesn't work for some chips! */
194 dev_err(&SIS5595_dev->dev, "force address failed - not supported?\n");
195 goto error;
196 }
197 }
198
199 if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val)
200 != PCIBIOS_SUCCESSFUL)
201 goto error;
202 if ((val & 0x80) == 0) {
203 dev_info(&SIS5595_dev->dev, "enabling ACPI\n");
204 if (pci_write_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, val | 0x80)
205 != PCIBIOS_SUCCESSFUL)
206 goto error;
207 if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val)
208 != PCIBIOS_SUCCESSFUL)
209 goto error;
210 if ((val & 0x80) == 0) {
211 /* doesn't work for some chips? */
212 dev_err(&SIS5595_dev->dev, "ACPI enable failed - not supported?\n");
213 goto error;
214 }
215 }
216
217 /* Everything is happy */
218 return 0;
219
220 error:
221 release_region(sis5595_base + SMB_INDEX, 2);
222 return -ENODEV;
223 }
224
225 static int sis5595_transaction(struct i2c_adapter *adap)
226 {
227 int temp;
228 int result = 0;
229 int timeout = 0;
230
231 /* Make sure the SMBus host is ready to start transmitting */
232 temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8);
233 if (temp != 0x00) {
234 dev_dbg(&adap->dev, "SMBus busy (%04x). Resetting...\n", temp);
235 sis5595_write(SMB_STS_LO, temp & 0xff);
236 sis5595_write(SMB_STS_HI, temp >> 8);
237 if ((temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8)) != 0x00) {
238 dev_dbg(&adap->dev, "Failed! (%02x)\n", temp);
239 return -EBUSY;
240 } else {
241 dev_dbg(&adap->dev, "Successful!\n");
242 }
243 }
244
245 /* start the transaction by setting bit 4 */
246 sis5595_write(SMB_CTL_LO, sis5595_read(SMB_CTL_LO) | 0x10);
247
248 /* We will always wait for a fraction of a second! */
249 do {
250 msleep(1);
251 temp = sis5595_read(SMB_STS_LO);
252 } while (!(temp & 0x40) && (timeout++ < MAX_TIMEOUT));
253
254 /* If the SMBus is still busy, we give up */
255 if (timeout > MAX_TIMEOUT) {
256 dev_dbg(&adap->dev, "SMBus Timeout!\n");
257 result = -ETIMEDOUT;
258 }
259
260 if (temp & 0x10) {
261 dev_dbg(&adap->dev, "Error: Failed bus transaction\n");
262 result = -ENXIO;
263 }
264
265 if (temp & 0x20) {
266 dev_err(&adap->dev, "Bus collision! SMBus may be locked until "
267 "next hard reset (or not...)\n");
268 /* Clock stops and slave is stuck in mid-transmission */
269 result = -EIO;
270 }
271
272 temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8);
273 if (temp != 0x00) {
274 sis5595_write(SMB_STS_LO, temp & 0xff);
275 sis5595_write(SMB_STS_HI, temp >> 8);
276 }
277
278 temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8);
279 if (temp != 0x00)
280 dev_dbg(&adap->dev, "Failed reset at end of transaction (%02x)\n", temp);
281
282 return result;
283 }
284
285 /* Return negative errno on error. */
286 static s32 sis5595_access(struct i2c_adapter *adap, u16 addr,
287 unsigned short flags, char read_write,
288 u8 command, int size, union i2c_smbus_data *data)
289 {
290 int status;
291
292 switch (size) {
293 case I2C_SMBUS_QUICK:
294 sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
295 size = SIS5595_QUICK;
296 break;
297 case I2C_SMBUS_BYTE:
298 sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
299 if (read_write == I2C_SMBUS_WRITE)
300 sis5595_write(SMB_CMD, command);
301 size = SIS5595_BYTE;
302 break;
303 case I2C_SMBUS_BYTE_DATA:
304 sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
305 sis5595_write(SMB_CMD, command);
306 if (read_write == I2C_SMBUS_WRITE)
307 sis5595_write(SMB_BYTE, data->byte);
308 size = SIS5595_BYTE_DATA;
309 break;
310 case I2C_SMBUS_PROC_CALL:
311 case I2C_SMBUS_WORD_DATA:
312 sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01));
313 sis5595_write(SMB_CMD, command);
314 if (read_write == I2C_SMBUS_WRITE) {
315 sis5595_write(SMB_BYTE, data->word & 0xff);
316 sis5595_write(SMB_BYTE + 1,
317 (data->word & 0xff00) >> 8);
318 }
319 size = (size == I2C_SMBUS_PROC_CALL) ? SIS5595_PROC_CALL : SIS5595_WORD_DATA;
320 break;
321 default:
322 dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
323 return -EOPNOTSUPP;
324 }
325
326 sis5595_write(SMB_CTL_LO, ((size & 0x0E)));
327
328 status = sis5595_transaction(adap);
329 if (status)
330 return status;
331
332 if ((size != SIS5595_PROC_CALL) &&
333 ((read_write == I2C_SMBUS_WRITE) || (size == SIS5595_QUICK)))
334 return 0;
335
336
337 switch (size) {
338 case SIS5595_BYTE:
339 case SIS5595_BYTE_DATA:
340 data->byte = sis5595_read(SMB_BYTE);
341 break;
342 case SIS5595_WORD_DATA:
343 case SIS5595_PROC_CALL:
344 data->word = sis5595_read(SMB_BYTE) + (sis5595_read(SMB_BYTE + 1) << 8);
345 break;
346 }
347 return 0;
348 }
349
350 static u32 sis5595_func(struct i2c_adapter *adapter)
351 {
352 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
353 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
354 I2C_FUNC_SMBUS_PROC_CALL;
355 }
356
357 static const struct i2c_algorithm smbus_algorithm = {
358 .smbus_xfer = sis5595_access,
359 .functionality = sis5595_func,
360 };
361
362 static struct i2c_adapter sis5595_adapter = {
363 .owner = THIS_MODULE,
364 .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
365 .algo = &smbus_algorithm,
366 };
367
368 static const struct pci_device_id sis5595_ids[] = {
369 { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
370 { 0, }
371 };
372
373 MODULE_DEVICE_TABLE (pci, sis5595_ids);
374
375 static int sis5595_probe(struct pci_dev *dev, const struct pci_device_id *id)
376 {
377 int err;
378
379 if (sis5595_setup(dev)) {
380 dev_err(&dev->dev, "SIS5595 not detected, module not inserted.\n");
381 return -ENODEV;
382 }
383
384 /* set up the sysfs linkage to our parent device */
385 sis5595_adapter.dev.parent = &dev->dev;
386
387 snprintf(sis5595_adapter.name, sizeof(sis5595_adapter.name),
388 "SMBus SIS5595 adapter at %04x", sis5595_base + SMB_INDEX);
389 err = i2c_add_adapter(&sis5595_adapter);
390 if (err) {
391 release_region(sis5595_base + SMB_INDEX, 2);
392 return err;
393 }
394
395 /* Always return failure here. This is to allow other drivers to bind
396 * to this pci device. We don't really want to have control over the
397 * pci device, we only wanted to read as few register values from it.
398 */
399 sis5595_pdev = pci_dev_get(dev);
400 return -ENODEV;
401 }
402
403 static struct pci_driver sis5595_driver = {
404 .name = "sis5595_smbus",
405 .id_table = sis5595_ids,
406 .probe = sis5595_probe,
407 };
408
409 static int __init i2c_sis5595_init(void)
410 {
411 return pci_register_driver(&sis5595_driver);
412 }
413
414 static void __exit i2c_sis5595_exit(void)
415 {
416 pci_unregister_driver(&sis5595_driver);
417 if (sis5595_pdev) {
418 i2c_del_adapter(&sis5595_adapter);
419 release_region(sis5595_base + SMB_INDEX, 2);
420 pci_dev_put(sis5595_pdev);
421 sis5595_pdev = NULL;
422 }
423 }
424
425 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
426 MODULE_DESCRIPTION("SIS5595 SMBus driver");
427 MODULE_LICENSE("GPL");
428
429 module_init(i2c_sis5595_init);
430 module_exit(i2c_sis5595_exit);
Linux with added FPC-III support