drivers/mfd/htc-i2cpld.c

   1 /*
   2  *  htc-i2cpld.c
   3  *  Chip driver for an unknown CPLD chip found on omap850 HTC devices like
   4  *  the HTC Wizard and HTC Herald.
   5  *  The cpld is located on the i2c bus and acts as an input/output GPIO
   6  *  extender.
   7  *
   8  *  Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
   9  *
  10  *  Based on work done in the linwizard project
  11  *  Copyright (C) 2008-2009 Angelo Arrifano <miknix@gmail.com>
  12  *
  13  * This program is free software; you can redistribute it and/or modify
  14  * it under the terms of the GNU General Public License as published by
  15  * the Free Software Foundation; either version 2 of the License, or
  16  * (at your option) any later version.
  17  *
  18  * This program is distributed in the hope that it will be useful,
  19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  * GNU General Public License for more details.
  22  *
  23  * You should have received a copy of the GNU General Public License
  24  * along with this program; if not, write to the Free Software
  25  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26  */
  27
  28 #include <linux/kernel.h>
  29 #include <linux/init.h>
  30 #include <linux/module.h>
  31 #include <linux/interrupt.h>
  32 #include <linux/platform_device.h>
  33 #include <linux/i2c.h>
  34 #include <linux/irq.h>
  35 #include <linux/spinlock.h>
  36 #include <linux/htcpld.h>
  37 #include <linux/gpio.h>
  38 #include <linux/slab.h>
  39
  40 struct htcpld_chip {
  41         spinlock_t              lock;
  42
  43         /* chip info */
  44         u8                      reset;
  45         u8                      addr;
  46         struct device           *dev;
  47         struct i2c_client       *client;
  48
  49         /* Output details */
  50         u8                      cache_out;
  51         struct gpio_chip        chip_out;
  52
  53         /* Input details */
  54         u8                      cache_in;
  55         struct gpio_chip        chip_in;
  56
  57         u16                     irqs_enabled;
  58         uint                    irq_start;
  59         int                     nirqs;
  60
  61         unsigned int            flow_type;
  62         /*
  63          * Work structure to allow for setting values outside of any
  64          * possible interrupt context
  65          */
  66         struct work_struct set_val_work;
  67 };
  68
  69 struct htcpld_data {
  70         /* irq info */
  71         u16                irqs_enabled;
  72         uint               irq_start;
  73         int                nirqs;
  74         uint               chained_irq;
  75         unsigned int       int_reset_gpio_hi;
  76         unsigned int       int_reset_gpio_lo;
  77
  78         /* htcpld info */
  79         struct htcpld_chip *chip;
  80         unsigned int       nchips;
  81 };
  82
  83 /* There does not appear to be a way to proactively mask interrupts
  84  * on the htcpld chip itself.  So, we simply ignore interrupts that
  85  * aren't desired. */
  86 static void htcpld_mask(struct irq_data *data)
  87 {
  88         struct htcpld_chip *chip = irq_data_get_irq_chip_data(data);
  89         chip->irqs_enabled &= ~(1 << (data->irq - chip->irq_start));
  90         pr_debug("HTCPLD mask %d %04x\n", data->irq, chip->irqs_enabled);
  91 }
  92 static void htcpld_unmask(struct irq_data *data)
  93 {
  94         struct htcpld_chip *chip = irq_data_get_irq_chip_data(data);
  95         chip->irqs_enabled |= 1 << (data->irq - chip->irq_start);
  96         pr_debug("HTCPLD unmask %d %04x\n", data->irq, chip->irqs_enabled);
  97 }
  98
  99 static int htcpld_set_type(struct irq_data *data, unsigned int flags)
 100 {
 101         struct htcpld_chip *chip = irq_data_get_irq_chip_data(data);
 102
 103         if (flags & ~IRQ_TYPE_SENSE_MASK)
 104                 return -EINVAL;
 105
 106         /* We only allow edge triggering */
 107         if (flags & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))
 108                 return -EINVAL;
 109
 110         chip->flow_type = flags;
 111         return 0;
 112 }
 113
 114 static struct irq_chip htcpld_muxed_chip = {
 115         .name         = "htcpld",
 116         .irq_mask     = htcpld_mask,
 117         .irq_unmask   = htcpld_unmask,
 118         .irq_set_type = htcpld_set_type,
 119 };
 120
 121 /* To properly dispatch IRQ events, we need to read from the
 122  * chip.  This is an I2C action that could possibly sleep
 123  * (which is bad in interrupt context) -- so we use a threaded
 124  * interrupt handler to get around that.
 125  */
 126 static irqreturn_t htcpld_handler(int irq, void *dev)
 127 {
 128         struct htcpld_data *htcpld = dev;
 129         unsigned int i;
 130         unsigned long flags;
 131         int irqpin;
 132
 133         if (!htcpld) {
 134                 pr_debug("htcpld is null in ISR\n");
 135                 return IRQ_HANDLED;
 136         }
 137
 138         /*
 139          * For each chip, do a read of the chip and trigger any interrupts
 140          * desired.  The interrupts will be triggered from LSB to MSB (i.e.
 141          * bit 0 first, then bit 1, etc.)
 142          *
 143          * For chips that have no interrupt range specified, just skip 'em.
 144          */
 145         for (i = 0; i < htcpld->nchips; i++) {
 146                 struct htcpld_chip *chip = &htcpld->chip[i];
 147                 struct i2c_client *client;
 148                 int val;
 149                 unsigned long uval, old_val;
 150
 151                 if (!chip) {
 152                         pr_debug("chip %d is null in ISR\n", i);
 153                         continue;
 154                 }
 155
 156                 if (chip->nirqs == 0)
 157                         continue;
 158
 159                 client = chip->client;
 160                 if (!client) {
 161                         pr_debug("client %d is null in ISR\n", i);
 162                         continue;
 163                 }
 164
 165                 /* Scan the chip */
 166                 val = i2c_smbus_read_byte_data(client, chip->cache_out);
 167                 if (val < 0) {
 168                         /* Throw a warning and skip this chip */
 169                         dev_warn(chip->dev, "Unable to read from chip: %d\n",
 170                                  val);
 171                         continue;
 172                 }
 173
 174                 uval = (unsigned long)val;
 175
 176                 spin_lock_irqsave(&chip->lock, flags);
 177
 178                 /* Save away the old value so we can compare it */
 179                 old_val = chip->cache_in;
 180
 181                 /* Write the new value */
 182                 chip->cache_in = uval;
 183
 184                 spin_unlock_irqrestore(&chip->lock, flags);
 185
 186                 /*
 187                  * For each bit in the data (starting at bit 0), trigger
 188                  * associated interrupts.
 189                  */
 190                 for (irqpin = 0; irqpin < chip->nirqs; irqpin++) {
 191                         unsigned oldb, newb, type = chip->flow_type;
 192
 193                         irq = chip->irq_start + irqpin;
 194
 195                         /* Run the IRQ handler, but only if the bit value
 196                          * changed, and the proper flags are set */
 197                         oldb = (old_val >> irqpin) & 1;
 198                         newb = (uval >> irqpin) & 1;
 199
 200                         if ((!oldb && newb && (type & IRQ_TYPE_EDGE_RISING)) ||
 201                             (oldb && !newb && (type & IRQ_TYPE_EDGE_FALLING))) {
 202                                 pr_debug("fire IRQ %d\n", irqpin);
 203                                 generic_handle_irq(irq);
 204                         }
 205                 }
 206         }
 207
 208         /*
 209          * In order to continue receiving interrupts, the int_reset_gpio must
 210          * be asserted.
 211          */
 212         if (htcpld->int_reset_gpio_hi)
 213                 gpio_set_value(htcpld->int_reset_gpio_hi, 1);
 214         if (htcpld->int_reset_gpio_lo)
 215                 gpio_set_value(htcpld->int_reset_gpio_lo, 0);
 216
 217         return IRQ_HANDLED;
 218 }
 219
 220 /*
 221  * The GPIO set routines can be called from interrupt context, especially if,
 222  * for example they're attached to the led-gpio framework and a trigger is
 223  * enabled.  As such, we declared work above in the htcpld_chip structure,
 224  * and that work is scheduled in the set routine.  The kernel can then run
 225  * the I2C functions, which will sleep, in process context.
 226  */
 227 static void htcpld_chip_set(struct gpio_chip *chip, unsigned offset, int val)
 228 {
 229         struct i2c_client *client;
 230         struct htcpld_chip *chip_data =
 231                 container_of(chip, struct htcpld_chip, chip_out);
 232         unsigned long flags;
 233
 234         client = chip_data->client;
 235         if (!client)
 236                 return;
 237
 238         spin_lock_irqsave(&chip_data->lock, flags);
 239         if (val)
 240                 chip_data->cache_out |= (1 << offset);
 241         else
 242                 chip_data->cache_out &= ~(1 << offset);
 243         spin_unlock_irqrestore(&chip_data->lock, flags);
 244
 245         schedule_work(&(chip_data->set_val_work));
 246 }
 247
 248 static void htcpld_chip_set_ni(struct work_struct *work)
 249 {
 250         struct htcpld_chip *chip_data;
 251         struct i2c_client *client;
 252
 253         chip_data = container_of(work, struct htcpld_chip, set_val_work);
 254         client = chip_data->client;
 255         i2c_smbus_read_byte_data(client, chip_data->cache_out);
 256 }
 257
 258 static int htcpld_chip_get(struct gpio_chip *chip, unsigned offset)
 259 {
 260         struct htcpld_chip *chip_data;
 261         u8 cache;
 262
 263         if (!strncmp(chip->label, "htcpld-out", 10)) {
 264                 chip_data = container_of(chip, struct htcpld_chip, chip_out);
 265                 cache = chip_data->cache_out;
 266         } else if (!strncmp(chip->label, "htcpld-in", 9)) {
 267                 chip_data = container_of(chip, struct htcpld_chip, chip_in);
 268                 cache = chip_data->cache_in;
 269         } else
 270                 return -EINVAL;
 271
 272         return (cache >> offset) & 1;
 273 }
 274
 275 static int htcpld_direction_output(struct gpio_chip *chip,
 276                                         unsigned offset, int value)
 277 {
 278         htcpld_chip_set(chip, offset, value);
 279         return 0;
 280 }
 281
 282 static int htcpld_direction_input(struct gpio_chip *chip,
 283                                         unsigned offset)
 284 {
 285         /*
 286          * No-op: this function can only be called on the input chip.
 287          * We do however make sure the offset is within range.
 288          */
 289         return (offset < chip->ngpio) ? 0 : -EINVAL;
 290 }
 291
 292 static int htcpld_chip_to_irq(struct gpio_chip *chip, unsigned offset)
 293 {
 294         struct htcpld_chip *chip_data;
 295
 296         chip_data = container_of(chip, struct htcpld_chip, chip_in);
 297
 298         if (offset < chip_data->nirqs)
 299                 return chip_data->irq_start + offset;
 300         else
 301                 return -EINVAL;
 302 }
 303
 304 static void htcpld_chip_reset(struct i2c_client *client)
 305 {
 306         struct htcpld_chip *chip_data = i2c_get_clientdata(client);
 307         if (!chip_data)
 308                 return;
 309
 310         i2c_smbus_read_byte_data(
 311                 client, (chip_data->cache_out = chip_data->reset));
 312 }
 313
 314 static int htcpld_setup_chip_irq(
 315                 struct platform_device *pdev,
 316                 int chip_index)
 317 {
 318         struct htcpld_data *htcpld;
 319         struct htcpld_chip *chip;
 320         unsigned int irq, irq_end;
 321         int ret = 0;
 322
 323         /* Get the platform and driver data */
 324         htcpld = platform_get_drvdata(pdev);
 325         chip = &htcpld->chip[chip_index];
 326
 327         /* Setup irq handlers */
 328         irq_end = chip->irq_start + chip->nirqs;
 329         for (irq = chip->irq_start; irq < irq_end; irq++) {
 330                 irq_set_chip_and_handler(irq, &htcpld_muxed_chip,
 331                                          handle_simple_irq);
 332                 irq_set_chip_data(irq, chip);
 333 #ifdef CONFIG_ARM
 334                 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 335 #else
 336                 irq_set_probe(irq);
 337 #endif
 338         }
 339
 340         return ret;
 341 }
 342
 343 static int htcpld_register_chip_i2c(
 344                 struct platform_device *pdev,
 345                 int chip_index)
 346 {
 347         struct htcpld_data *htcpld;
 348         struct device *dev = &pdev->dev;
 349         struct htcpld_core_platform_data *pdata;
 350         struct htcpld_chip *chip;
 351         struct htcpld_chip_platform_data *plat_chip_data;
 352         struct i2c_adapter *adapter;
 353         struct i2c_client *client;
 354         struct i2c_board_info info;
 355
 356         /* Get the platform and driver data */
 357         pdata = dev_get_platdata(dev);
 358         htcpld = platform_get_drvdata(pdev);
 359         chip = &htcpld->chip[chip_index];
 360         plat_chip_data = &pdata->chip[chip_index];
 361
 362         adapter = i2c_get_adapter(pdata->i2c_adapter_id);
 363         if (!adapter) {
 364                 /* Eek, no such I2C adapter!  Bail out. */
 365                 dev_warn(dev, "Chip at i2c address 0x%x: Invalid i2c adapter %d\n",
 366                          plat_chip_data->addr, pdata->i2c_adapter_id);
 367                 return -ENODEV;
 368         }
 369
 370         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
 371                 dev_warn(dev, "i2c adapter %d non-functional\n",
 372                          pdata->i2c_adapter_id);
 373                 return -EINVAL;
 374         }
 375
 376         memset(&info, 0, sizeof(struct i2c_board_info));
 377         info.addr = plat_chip_data->addr;
 378         strlcpy(info.type, "htcpld-chip", I2C_NAME_SIZE);
 379         info.platform_data = chip;
 380
 381         /* Add the I2C device.  This calls the probe() function. */
 382         client = i2c_new_device(adapter, &info);
 383         if (!client) {
 384                 /* I2C device registration failed, contineu with the next */
 385                 dev_warn(dev, "Unable to add I2C device for 0x%x\n",
 386                          plat_chip_data->addr);
 387                 return -ENODEV;
 388         }
 389
 390         i2c_set_clientdata(client, chip);
 391         snprintf(client->name, I2C_NAME_SIZE, "Chip_0x%x", client->addr);
 392         chip->client = client;
 393
 394         /* Reset the chip */
 395         htcpld_chip_reset(client);
 396         chip->cache_in = i2c_smbus_read_byte_data(client, chip->cache_out);
 397
 398         return 0;
 399 }
 400
 401 static void htcpld_unregister_chip_i2c(
 402                 struct platform_device *pdev,
 403                 int chip_index)
 404 {
 405         struct htcpld_data *htcpld;
 406         struct htcpld_chip *chip;
 407
 408         /* Get the platform and driver data */
 409         htcpld = platform_get_drvdata(pdev);
 410         chip = &htcpld->chip[chip_index];
 411
 412         if (chip->client)
 413                 i2c_unregister_device(chip->client);
 414 }
 415
 416 static int htcpld_register_chip_gpio(
 417                 struct platform_device *pdev,
 418                 int chip_index)
 419 {
 420         struct htcpld_data *htcpld;
 421         struct device *dev = &pdev->dev;
 422         struct htcpld_core_platform_data *pdata;
 423         struct htcpld_chip *chip;
 424         struct htcpld_chip_platform_data *plat_chip_data;
 425         struct gpio_chip *gpio_chip;
 426         int ret = 0;
 427
 428         /* Get the platform and driver data */
 429         pdata = dev_get_platdata(dev);
 430         htcpld = platform_get_drvdata(pdev);
 431         chip = &htcpld->chip[chip_index];
 432         plat_chip_data = &pdata->chip[chip_index];
 433
 434         /* Setup the GPIO chips */
 435         gpio_chip = &(chip->chip_out);
 436         gpio_chip->label           = "htcpld-out";
 437         gpio_chip->dev             = dev;
 438         gpio_chip->owner           = THIS_MODULE;
 439         gpio_chip->get             = htcpld_chip_get;
 440         gpio_chip->set             = htcpld_chip_set;
 441         gpio_chip->direction_input = NULL;
 442         gpio_chip->direction_output = htcpld_direction_output;
 443         gpio_chip->base            = plat_chip_data->gpio_out_base;
 444         gpio_chip->ngpio           = plat_chip_data->num_gpios;
 445
 446         gpio_chip = &(chip->chip_in);
 447         gpio_chip->label           = "htcpld-in";
 448         gpio_chip->dev             = dev;
 449         gpio_chip->owner           = THIS_MODULE;
 450         gpio_chip->get             = htcpld_chip_get;
 451         gpio_chip->set             = NULL;
 452         gpio_chip->direction_input = htcpld_direction_input;
 453         gpio_chip->direction_output = NULL;
 454         gpio_chip->to_irq          = htcpld_chip_to_irq;
 455         gpio_chip->base            = plat_chip_data->gpio_in_base;
 456         gpio_chip->ngpio           = plat_chip_data->num_gpios;
 457
 458         /* Add the GPIO chips */
 459         ret = gpiochip_add(&(chip->chip_out));
 460         if (ret) {
 461                 dev_warn(dev, "Unable to register output GPIOs for 0x%x: %d\n",
 462                          plat_chip_data->addr, ret);
 463                 return ret;
 464         }
 465
 466         ret = gpiochip_add(&(chip->chip_in));
 467         if (ret) {
 468                 dev_warn(dev, "Unable to register input GPIOs for 0x%x: %d\n",
 469                          plat_chip_data->addr, ret);
 470                 gpiochip_remove(&(chip->chip_out));
 471                 return ret;
 472         }
 473
 474         return 0;
 475 }
 476
 477 static int htcpld_setup_chips(struct platform_device *pdev)
 478 {
 479         struct htcpld_data *htcpld;
 480         struct device *dev = &pdev->dev;
 481         struct htcpld_core_platform_data *pdata;
 482         int i;
 483
 484         /* Get the platform and driver data */
 485         pdata = dev_get_platdata(dev);
 486         htcpld = platform_get_drvdata(pdev);
 487
 488         /* Setup each chip's output GPIOs */
 489         htcpld->nchips = pdata->num_chip;
 490         htcpld->chip = devm_kzalloc(dev, sizeof(struct htcpld_chip) * htcpld->nchips,
 491                                     GFP_KERNEL);
 492         if (!htcpld->chip) {
 493                 dev_warn(dev, "Unable to allocate memory for chips\n");
 494                 return -ENOMEM;
 495         }
 496
 497         /* Add the chips as best we can */
 498         for (i = 0; i < htcpld->nchips; i++) {
 499                 int ret;
 500
 501                 /* Setup the HTCPLD chips */
 502                 htcpld->chip[i].reset = pdata->chip[i].reset;
 503                 htcpld->chip[i].cache_out = pdata->chip[i].reset;
 504                 htcpld->chip[i].cache_in = 0;
 505                 htcpld->chip[i].dev = dev;
 506                 htcpld->chip[i].irq_start = pdata->chip[i].irq_base;
 507                 htcpld->chip[i].nirqs = pdata->chip[i].num_irqs;
 508
 509                 INIT_WORK(&(htcpld->chip[i].set_val_work), &htcpld_chip_set_ni);
 510                 spin_lock_init(&(htcpld->chip[i].lock));
 511
 512                 /* Setup the interrupts for the chip */
 513                 if (htcpld->chained_irq) {
 514                         ret = htcpld_setup_chip_irq(pdev, i);
 515                         if (ret)
 516                                 continue;
 517                 }
 518
 519                 /* Register the chip with I2C */
 520                 ret = htcpld_register_chip_i2c(pdev, i);
 521                 if (ret)
 522                         continue;
 523
 524
 525                 /* Register the chips with the GPIO subsystem */
 526                 ret = htcpld_register_chip_gpio(pdev, i);
 527                 if (ret) {
 528                         /* Unregister the chip from i2c and continue */
 529                         htcpld_unregister_chip_i2c(pdev, i);
 530                         continue;
 531                 }
 532
 533                 dev_info(dev, "Registered chip at 0x%x\n", pdata->chip[i].addr);
 534         }
 535
 536         return 0;
 537 }
 538
 539 static int htcpld_core_probe(struct platform_device *pdev)
 540 {
 541         struct htcpld_data *htcpld;
 542         struct device *dev = &pdev->dev;
 543         struct htcpld_core_platform_data *pdata;
 544         struct resource *res;
 545         int ret = 0;
 546
 547         if (!dev)
 548                 return -ENODEV;
 549
 550         pdata = dev_get_platdata(dev);
 551         if (!pdata) {
 552                 dev_warn(dev, "Platform data not found for htcpld core!\n");
 553                 return -ENXIO;
 554         }
 555
 556         htcpld = devm_kzalloc(dev, sizeof(struct htcpld_data), GFP_KERNEL);
 557         if (!htcpld)
 558                 return -ENOMEM;
 559
 560         /* Find chained irq */
 561         res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 562         if (res) {
 563                 int flags;
 564                 htcpld->chained_irq = res->start;
 565
 566                 /* Setup the chained interrupt handler */
 567                 flags = IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING;
 568                 ret = request_threaded_irq(htcpld->chained_irq,
 569                                            NULL, htcpld_handler,
 570                                            flags, pdev->name, htcpld);
 571                 if (ret) {
 572                         dev_warn(dev, "Unable to setup chained irq handler: %d\n", ret);
 573                         return ret;
 574                 } else
 575                         device_init_wakeup(dev, 0);
 576         }
 577
 578         /* Set the driver data */
 579         platform_set_drvdata(pdev, htcpld);
 580
 581         /* Setup the htcpld chips */
 582         ret = htcpld_setup_chips(pdev);
 583         if (ret)
 584                 return ret;
 585
 586         /* Request the GPIO(s) for the int reset and set them up */
 587         if (pdata->int_reset_gpio_hi) {
 588                 ret = gpio_request(pdata->int_reset_gpio_hi, "htcpld-core");
 589                 if (ret) {
 590                         /*
 591                          * If it failed, that sucks, but we can probably
 592                          * continue on without it.
 593                          */
 594                         dev_warn(dev, "Unable to request int_reset_gpio_hi -- interrupts may not work\n");
 595                         htcpld->int_reset_gpio_hi = 0;
 596                 } else {
 597                         htcpld->int_reset_gpio_hi = pdata->int_reset_gpio_hi;
 598                         gpio_set_value(htcpld->int_reset_gpio_hi, 1);
 599                 }
 600         }
 601
 602         if (pdata->int_reset_gpio_lo) {
 603                 ret = gpio_request(pdata->int_reset_gpio_lo, "htcpld-core");
 604                 if (ret) {
 605                         /*
 606                          * If it failed, that sucks, but we can probably
 607                          * continue on without it.
 608                          */
 609                         dev_warn(dev, "Unable to request int_reset_gpio_lo -- interrupts may not work\n");
 610                         htcpld->int_reset_gpio_lo = 0;
 611                 } else {
 612                         htcpld->int_reset_gpio_lo = pdata->int_reset_gpio_lo;
 613                         gpio_set_value(htcpld->int_reset_gpio_lo, 0);
 614                 }
 615         }
 616
 617         dev_info(dev, "Initialized successfully\n");
 618         return 0;
 619 }
 620
 621 /* The I2C Driver -- used internally */
 622 static const struct i2c_device_id htcpld_chip_id[] = {
 623         { "htcpld-chip", 0 },
 624         { }
 625 };
 626 MODULE_DEVICE_TABLE(i2c, htcpld_chip_id);
 627
 628
 629 static struct i2c_driver htcpld_chip_driver = {
 630         .driver = {
 631                 .name   = "htcpld-chip",
 632         },
 633         .id_table = htcpld_chip_id,
 634 };
 635
 636 /* The Core Driver */
 637 static struct platform_driver htcpld_core_driver = {
 638         .driver = {
 639                 .name = "i2c-htcpld",
 640         },
 641 };
 642
 643 static int __init htcpld_core_init(void)
 644 {
 645         int ret;
 646
 647         /* Register the I2C Chip driver */
 648         ret = i2c_add_driver(&htcpld_chip_driver);
 649         if (ret)
 650                 return ret;
 651
 652         /* Probe for our chips */
 653         return platform_driver_probe(&htcpld_core_driver, htcpld_core_probe);
 654 }
 655
 656 static void __exit htcpld_core_exit(void)
 657 {
 658         i2c_del_driver(&htcpld_chip_driver);
 659         platform_driver_unregister(&htcpld_core_driver);
 660 }
 661
 662 module_init(htcpld_core_init);
 663 module_exit(htcpld_core_exit);
 664
 665 MODULE_AUTHOR("Cory Maccarrone <darkstar6262@gmail.com>");
 666 MODULE_DESCRIPTION("I2C HTC PLD Driver");
 667 MODULE_LICENSE("GPL");
 668