Linux 4.1.16

[linux/fpc-iii.git] / drivers / misc / genwqe / card_base.c

/**
 * IBM Accelerator Family 'GenWQE'
 *
 * (C) Copyright IBM Corp. 2013
 *
 * Author: Frank Haverkamp <haver@linux.vnet.ibm.com>
 * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
 * Author: Michael Jung <mijung@gmx.net>
 * Author: Michael Ruettger <michael@ibmra.de>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License (version 2 only)
 * as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 */

/*
 * Module initialization and PCIe setup. Card health monitoring and
 * recovery functionality. Character device creation and deletion are
 * controlled from here.
 */

#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/err.h>
#include <linux/aer.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/notifier.h>
#include <linux/device.h>
#include <linux/log2.h>

#include "card_base.h"
#include "card_ddcb.h"

MODULE_AUTHOR("Frank Haverkamp <haver@linux.vnet.ibm.com>");
MODULE_AUTHOR("Michael Ruettger <michael@ibmra.de>");
MODULE_AUTHOR("Joerg-Stephan Vogt <jsvogt@de.ibm.com>");
MODULE_AUTHOR("Michael Jung <mijung@gmx.net>");

MODULE_DESCRIPTION("GenWQE Card");
MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");

static char genwqe_driver_name[] = GENWQE_DEVNAME;
static struct class *class_genwqe;
static struct dentry *debugfs_genwqe;
static struct genwqe_dev *genwqe_devices[GENWQE_CARD_NO_MAX];

/* PCI structure for identifying device by PCI vendor and device ID */
static const struct pci_device_id genwqe_device_table[] = {
        { .vendor      = PCI_VENDOR_ID_IBM,
          .device      = PCI_DEVICE_GENWQE,
          .subvendor   = PCI_SUBVENDOR_ID_IBM,
          .subdevice   = PCI_SUBSYSTEM_ID_GENWQE5,
          .class       = (PCI_CLASSCODE_GENWQE5 << 8),
          .class_mask  = ~0,
          .driver_data = 0 },

        /* Initial SR-IOV bring-up image */
        { .vendor      = PCI_VENDOR_ID_IBM,
          .device      = PCI_DEVICE_GENWQE,
          .subvendor   = PCI_SUBVENDOR_ID_IBM_SRIOV,
          .subdevice   = PCI_SUBSYSTEM_ID_GENWQE5_SRIOV,
          .class       = (PCI_CLASSCODE_GENWQE5_SRIOV << 8),
          .class_mask  = ~0,
          .driver_data = 0 },

        { .vendor      = PCI_VENDOR_ID_IBM,  /* VF Vendor ID */
          .device      = 0x0000,  /* VF Device ID */
          .subvendor   = PCI_SUBVENDOR_ID_IBM_SRIOV,
          .subdevice   = PCI_SUBSYSTEM_ID_GENWQE5_SRIOV,
          .class       = (PCI_CLASSCODE_GENWQE5_SRIOV << 8),
          .class_mask  = ~0,
          .driver_data = 0 },

        /* Fixed up image */
        { .vendor      = PCI_VENDOR_ID_IBM,
          .device      = PCI_DEVICE_GENWQE,
          .subvendor   = PCI_SUBVENDOR_ID_IBM_SRIOV,
          .subdevice   = PCI_SUBSYSTEM_ID_GENWQE5,
          .class       = (PCI_CLASSCODE_GENWQE5_SRIOV << 8),
          .class_mask  = ~0,
          .driver_data = 0 },

        { .vendor      = PCI_VENDOR_ID_IBM,  /* VF Vendor ID */
          .device      = 0x0000,  /* VF Device ID */
          .subvendor   = PCI_SUBVENDOR_ID_IBM_SRIOV,
          .subdevice   = PCI_SUBSYSTEM_ID_GENWQE5,
          .class       = (PCI_CLASSCODE_GENWQE5_SRIOV << 8),
          .class_mask  = ~0,
          .driver_data = 0 },

        /* Even one more ... */
        { .vendor      = PCI_VENDOR_ID_IBM,
          .device      = PCI_DEVICE_GENWQE,
          .subvendor   = PCI_SUBVENDOR_ID_IBM,
          .subdevice   = PCI_SUBSYSTEM_ID_GENWQE5_NEW,
          .class       = (PCI_CLASSCODE_GENWQE5 << 8),
          .class_mask  = ~0,
          .driver_data = 0 },

        { 0, }                  /* 0 terminated list. */
};

MODULE_DEVICE_TABLE(pci, genwqe_device_table);

/**
 * genwqe_dev_alloc() - Create and prepare a new card descriptor
 *
 * Return: Pointer to card descriptor, or ERR_PTR(err) on error
 */
static struct genwqe_dev *genwqe_dev_alloc(void)
{
        unsigned int i = 0, j;
        struct genwqe_dev *cd;

        for (i = 0; i < GENWQE_CARD_NO_MAX; i++) {
                if (genwqe_devices[i] == NULL)
                        break;
        }
        if (i >= GENWQE_CARD_NO_MAX)
                return ERR_PTR(-ENODEV);

        cd = kzalloc(sizeof(struct genwqe_dev), GFP_KERNEL);
        if (!cd)
                return ERR_PTR(-ENOMEM);

        cd->card_idx = i;
        cd->class_genwqe = class_genwqe;
        cd->debugfs_genwqe = debugfs_genwqe;

        /*
         * This comes from kernel config option and can be overritten via
         * debugfs.
         */
        cd->use_platform_recovery = CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY;

        init_waitqueue_head(&cd->queue_waitq);

        spin_lock_init(&cd->file_lock);
        INIT_LIST_HEAD(&cd->file_list);

        cd->card_state = GENWQE_CARD_UNUSED;
        spin_lock_init(&cd->print_lock);

        cd->ddcb_software_timeout = genwqe_ddcb_software_timeout;
        cd->kill_timeout = genwqe_kill_timeout;

        for (j = 0; j < GENWQE_MAX_VFS; j++)
                cd->vf_jobtimeout_msec[j] = genwqe_vf_jobtimeout_msec;

        genwqe_devices[i] = cd;
        return cd;
}

static void genwqe_dev_free(struct genwqe_dev *cd)
{
        if (!cd)
                return;

        genwqe_devices[cd->card_idx] = NULL;
        kfree(cd);
}

/**
 * genwqe_bus_reset() - Card recovery
 *
 * pci_reset_function() will recover the device and ensure that the
 * registers are accessible again when it completes with success. If
 * not, the card will stay dead and registers will be unaccessible
 * still.
 */
static int genwqe_bus_reset(struct genwqe_dev *cd)
{
        int bars, rc = 0;
        struct pci_dev *pci_dev = cd->pci_dev;
        void __iomem *mmio;

        if (cd->err_inject & GENWQE_INJECT_BUS_RESET_FAILURE)
                return -EIO;

        mmio = cd->mmio;
        cd->mmio = NULL;
        pci_iounmap(pci_dev, mmio);

        bars = pci_select_bars(pci_dev, IORESOURCE_MEM);
        pci_release_selected_regions(pci_dev, bars);

        /*
         * Firmware/BIOS might change memory mapping during bus reset.
         * Settings like enable bus-mastering, ... are backuped and
         * restored by the pci_reset_function().
         */
        dev_dbg(&pci_dev->dev, "[%s] pci_reset function ...\n", __func__);
        rc = pci_reset_function(pci_dev);
        if (rc) {
                dev_err(&pci_dev->dev,
                        "[%s] err: failed reset func (rc %d)\n", __func__, rc);
                return rc;
        }
        dev_dbg(&pci_dev->dev, "[%s] done with rc=%d\n", __func__, rc);

        /*
         * Here is the right spot to clear the register read
         * failure. pci_bus_reset() does this job in real systems.
         */
        cd->err_inject &= ~(GENWQE_INJECT_HARDWARE_FAILURE |
                            GENWQE_INJECT_GFIR_FATAL |
                            GENWQE_INJECT_GFIR_INFO);

        rc = pci_request_selected_regions(pci_dev, bars, genwqe_driver_name);
        if (rc) {
                dev_err(&pci_dev->dev,
                        "[%s] err: request bars failed (%d)\n", __func__, rc);
                return -EIO;
        }

        cd->mmio = pci_iomap(pci_dev, 0, 0);
        if (cd->mmio == NULL) {
                dev_err(&pci_dev->dev,
                        "[%s] err: mapping BAR0 failed\n", __func__);
                return -ENOMEM;
        }
        return 0;
}

/*
 * Hardware circumvention section. Certain bitstreams in our test-lab
 * had different kinds of problems. Here is where we adjust those
 * bitstreams to function will with this version of our device driver.
 *
 * Thise circumventions are applied to the physical function only.
 * The magical numbers below are identifying development/manufacturing
 * versions of the bitstream used on the card.
 *
 * Turn off error reporting for old/manufacturing images.
 */

bool genwqe_need_err_masking(struct genwqe_dev *cd)
{
        return (cd->slu_unitcfg & 0xFFFF0ull) < 0x32170ull;
}

static void genwqe_tweak_hardware(struct genwqe_dev *cd)
{
        struct pci_dev *pci_dev = cd->pci_dev;

        /* Mask FIRs for development images */
        if (((cd->slu_unitcfg & 0xFFFF0ull) >= 0x32000ull) &&
            ((cd->slu_unitcfg & 0xFFFF0ull) <= 0x33250ull)) {
                dev_warn(&pci_dev->dev,
                         "FIRs masked due to bitstream %016llx.%016llx\n",
                         cd->slu_unitcfg, cd->app_unitcfg);

                __genwqe_writeq(cd, IO_APP_SEC_LEM_DEBUG_OVR,
                                0xFFFFFFFFFFFFFFFFull);

                __genwqe_writeq(cd, IO_APP_ERR_ACT_MASK,
                                0x0000000000000000ull);
        }
}

/**
 * genwqe_recovery_on_fatal_gfir_required() - Version depended actions
 *
 * Bitstreams older than 2013-02-17 have a bug where fatal GFIRs must
 * be ignored. This is e.g. true for the bitstream we gave to the card
 * manufacturer, but also for some old bitstreams we released to our
 * test-lab.
 */
int genwqe_recovery_on_fatal_gfir_required(struct genwqe_dev *cd)
{
        return (cd->slu_unitcfg & 0xFFFF0ull) >= 0x32170ull;
}

int genwqe_flash_readback_fails(struct genwqe_dev *cd)
{
        return (cd->slu_unitcfg & 0xFFFF0ull) < 0x32170ull;
}

/**
 * genwqe_T_psec() - Calculate PF/VF timeout register content
 *
 * Note: From a design perspective it turned out to be a bad idea to
 * use codes here to specifiy the frequency/speed values. An old
 * driver cannot understand new codes and is therefore always a
 * problem. Better is to measure out the value or put the
 * speed/frequency directly into a register which is always a valid
 * value for old as well as for new software.
 */
/* T = 1/f */
static int genwqe_T_psec(struct genwqe_dev *cd)
{
        u16 speed;      /* 1/f -> 250,  200,  166,  175 */
        static const int T[] = { 4000, 5000, 6000, 5714 };

        speed = (u16)((cd->slu_unitcfg >> 28) & 0x0full);
        if (speed >= ARRAY_SIZE(T))
                return -1;      /* illegal value */

        return T[speed];
}

/**
 * genwqe_setup_pf_jtimer() - Setup PF hardware timeouts for DDCB execution
 *
 * Do this _after_ card_reset() is called. Otherwise the values will
 * vanish. The settings need to be done when the queues are inactive.
 *
 * The max. timeout value is 2^(10+x) * T (6ns for 166MHz) * 15/16.
 * The min. timeout value is 2^(10+x) * T (6ns for 166MHz) * 14/16.
 */
static bool genwqe_setup_pf_jtimer(struct genwqe_dev *cd)
{
        u32 T = genwqe_T_psec(cd);
        u64 x;

        if (genwqe_pf_jobtimeout_msec == 0)
                return false;

        /* PF: large value needed, flash update 2sec per block */
        x = ilog2(genwqe_pf_jobtimeout_msec *
                  16000000000uL/(T * 15)) - 10;

        genwqe_write_vreg(cd, IO_SLC_VF_APPJOB_TIMEOUT,
                          0xff00 | (x & 0xff), 0);
        return true;
}

/**
 * genwqe_setup_vf_jtimer() - Setup VF hardware timeouts for DDCB execution
 */
static bool genwqe_setup_vf_jtimer(struct genwqe_dev *cd)
{
        struct pci_dev *pci_dev = cd->pci_dev;
        unsigned int vf;
        u32 T = genwqe_T_psec(cd);
        u64 x;
        int totalvfs;

        totalvfs = pci_sriov_get_totalvfs(pci_dev);
        if (totalvfs <= 0)
                return false;

        for (vf = 0; vf < totalvfs; vf++) {

                if (cd->vf_jobtimeout_msec[vf] == 0)
                        continue;

                x = ilog2(cd->vf_jobtimeout_msec[vf] *
                          16000000000uL/(T * 15)) - 10;

                genwqe_write_vreg(cd, IO_SLC_VF_APPJOB_TIMEOUT,
                                  0xff00 | (x & 0xff), vf + 1);
        }
        return true;
}

static int genwqe_ffdc_buffs_alloc(struct genwqe_dev *cd)
{
        unsigned int type, e = 0;

        for (type = 0; type < GENWQE_DBG_UNITS; type++) {
                switch (type) {
                case GENWQE_DBG_UNIT0:
                        e = genwqe_ffdc_buff_size(cd, 0);
                        break;
                case GENWQE_DBG_UNIT1:
                        e = genwqe_ffdc_buff_size(cd, 1);
                        break;
                case GENWQE_DBG_UNIT2:
                        e = genwqe_ffdc_buff_size(cd, 2);
                        break;
                case GENWQE_DBG_REGS:
                        e = GENWQE_FFDC_REGS;
                        break;
                }

                /* currently support only the debug units mentioned here */
                cd->ffdc[type].entries = e;
                cd->ffdc[type].regs =
                        kmalloc_array(e, sizeof(struct genwqe_reg),
                                      GFP_KERNEL);
                /*
                 * regs == NULL is ok, the using code treats this as no regs,
                 * Printing warning is ok in this case.
                 */
        }
        return 0;
}

static void genwqe_ffdc_buffs_free(struct genwqe_dev *cd)
{
        unsigned int type;

        for (type = 0; type < GENWQE_DBG_UNITS; type++) {
                kfree(cd->ffdc[type].regs);
                cd->ffdc[type].regs = NULL;
        }
}

static int genwqe_read_ids(struct genwqe_dev *cd)
{
        int err = 0;
        int slu_id;
        struct pci_dev *pci_dev = cd->pci_dev;

        cd->slu_unitcfg = __genwqe_readq(cd, IO_SLU_UNITCFG);
        if (cd->slu_unitcfg == IO_ILLEGAL_VALUE) {
                dev_err(&pci_dev->dev,
                        "err: SLUID=%016llx\n", cd->slu_unitcfg);
                err = -EIO;
                goto out_err;
        }

        slu_id = genwqe_get_slu_id(cd);
        if (slu_id < GENWQE_SLU_ARCH_REQ || slu_id == 0xff) {
                dev_err(&pci_dev->dev,
                        "err: incompatible SLU Architecture %u\n", slu_id);
                err = -ENOENT;
                goto out_err;
        }

        cd->app_unitcfg = __genwqe_readq(cd, IO_APP_UNITCFG);
        if (cd->app_unitcfg == IO_ILLEGAL_VALUE) {
                dev_err(&pci_dev->dev,
                        "err: APPID=%016llx\n", cd->app_unitcfg);
                err = -EIO;
                goto out_err;
        }
        genwqe_read_app_id(cd, cd->app_name, sizeof(cd->app_name));

        /*
         * Is access to all registers possible? If we are a VF the
         * answer is obvious. If we run fully virtualized, we need to
         * check if we can access all registers. If we do not have
         * full access we will cause an UR and some informational FIRs
         * in the PF, but that should not harm.
         */
        if (pci_dev->is_virtfn)
                cd->is_privileged = 0;
        else
                cd->is_privileged = (__genwqe_readq(cd, IO_SLU_BITSTREAM)
                                     != IO_ILLEGAL_VALUE);

 out_err:
        return err;
}

static int genwqe_start(struct genwqe_dev *cd)
{
        int err;
        struct pci_dev *pci_dev = cd->pci_dev;

        err = genwqe_read_ids(cd);
        if (err)
                return err;

        if (genwqe_is_privileged(cd)) {
                /* do this after the tweaks. alloc fail is acceptable */
                genwqe_ffdc_buffs_alloc(cd);
                genwqe_stop_traps(cd);

                /* Collect registers e.g. FIRs, UNITIDs, traces ... */
                genwqe_read_ffdc_regs(cd, cd->ffdc[GENWQE_DBG_REGS].regs,
                                      cd->ffdc[GENWQE_DBG_REGS].entries, 0);

                genwqe_ffdc_buff_read(cd, GENWQE_DBG_UNIT0,
                                      cd->ffdc[GENWQE_DBG_UNIT0].regs,
                                      cd->ffdc[GENWQE_DBG_UNIT0].entries);

                genwqe_ffdc_buff_read(cd, GENWQE_DBG_UNIT1,
                                      cd->ffdc[GENWQE_DBG_UNIT1].regs,
                                      cd->ffdc[GENWQE_DBG_UNIT1].entries);

                genwqe_ffdc_buff_read(cd, GENWQE_DBG_UNIT2,
                                      cd->ffdc[GENWQE_DBG_UNIT2].regs,
                                      cd->ffdc[GENWQE_DBG_UNIT2].entries);

                genwqe_start_traps(cd);

                if (cd->card_state == GENWQE_CARD_FATAL_ERROR) {
                        dev_warn(&pci_dev->dev,
                                 "[%s] chip reload/recovery!\n", __func__);

                        /*
                         * Stealth Mode: Reload chip on either hot
                         * reset or PERST.
                         */
                        cd->softreset = 0x7Cull;
                        __genwqe_writeq(cd, IO_SLC_CFGREG_SOFTRESET,
                                       cd->softreset);

                        err = genwqe_bus_reset(cd);
                        if (err != 0) {
                                dev_err(&pci_dev->dev,
                                        "[%s] err: bus reset failed!\n",
                                        __func__);
                                goto out;
                        }

                        /*
                         * Re-read the IDs because
                         * it could happen that the bitstream load
                         * failed!
                         */
                        err = genwqe_read_ids(cd);
                        if (err)
                                goto out;
                }
        }

        err = genwqe_setup_service_layer(cd);  /* does a reset to the card */
        if (err != 0) {
                dev_err(&pci_dev->dev,
                        "[%s] err: could not setup servicelayer!\n", __func__);
                err = -ENODEV;
                goto out;
        }

        if (genwqe_is_privileged(cd)) {  /* code is running _after_ reset */
                genwqe_tweak_hardware(cd);

                genwqe_setup_pf_jtimer(cd);
                genwqe_setup_vf_jtimer(cd);
        }

        err = genwqe_device_create(cd);
        if (err < 0) {
                dev_err(&pci_dev->dev,
                        "err: chdev init failed! (err=%d)\n", err);
                goto out_release_service_layer;
        }
        return 0;

 out_release_service_layer:
        genwqe_release_service_layer(cd);
 out:
        if (genwqe_is_privileged(cd))
                genwqe_ffdc_buffs_free(cd);
        return -EIO;
}

/**
 * genwqe_stop() - Stop card operation
 *
 * Recovery notes:
 *   As long as genwqe_thread runs we might access registers during
 *   error data capture. Same is with the genwqe_health_thread.
 *   When genwqe_bus_reset() fails this function might called two times:
 *   first by the genwqe_health_thread() and later by genwqe_remove() to
 *   unbind the device. We must be able to survive that.
 *
 * This function must be robust enough to be called twice.
 */
static int genwqe_stop(struct genwqe_dev *cd)
{
        genwqe_finish_queue(cd);            /* no register access */
        genwqe_device_remove(cd);           /* device removed, procs killed */
        genwqe_release_service_layer(cd);   /* here genwqe_thread is stopped */

        if (genwqe_is_privileged(cd)) {
                pci_disable_sriov(cd->pci_dev); /* access pci config space */
                genwqe_ffdc_buffs_free(cd);
        }

        return 0;
}

/**
 * genwqe_recover_card() - Try to recover the card if it is possible
 *
 * If fatal_err is set no register access is possible anymore. It is
 * likely that genwqe_start fails in that situation. Proper error
 * handling is required in this case.
 *
 * genwqe_bus_reset() will cause the pci code to call genwqe_remove()
 * and later genwqe_probe() for all virtual functions.
 */
static int genwqe_recover_card(struct genwqe_dev *cd, int fatal_err)
{
        int rc;
        struct pci_dev *pci_dev = cd->pci_dev;

        genwqe_stop(cd);

        /*
         * Make sure chip is not reloaded to maintain FFDC. Write SLU
         * Reset Register, CPLDReset field to 0.
         */
        if (!fatal_err) {
                cd->softreset = 0x70ull;
                __genwqe_writeq(cd, IO_SLC_CFGREG_SOFTRESET, cd->softreset);
        }

        rc = genwqe_bus_reset(cd);
        if (rc != 0) {
                dev_err(&pci_dev->dev,
                        "[%s] err: card recovery impossible!\n", __func__);
                return rc;
        }

        rc = genwqe_start(cd);
        if (rc < 0) {
                dev_err(&pci_dev->dev,
                        "[%s] err: failed to launch device!\n", __func__);
                return rc;
        }
        return 0;
}

static int genwqe_health_check_cond(struct genwqe_dev *cd, u64 *gfir)
{
        *gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR);
        return (*gfir & GFIR_ERR_TRIGGER) &&
                genwqe_recovery_on_fatal_gfir_required(cd);
}

/**
 * genwqe_fir_checking() - Check the fault isolation registers of the card
 *
 * If this code works ok, can be tried out with help of the genwqe_poke tool:
 *   sudo ./tools/genwqe_poke 0x8 0xfefefefefef
 *
 * Now the relevant FIRs/sFIRs should be printed out and the driver should
 * invoke recovery (devices are removed and readded).
 */
static u64 genwqe_fir_checking(struct genwqe_dev *cd)
{
        int j, iterations = 0;
        u64 mask, fir, fec, uid, gfir, gfir_masked, sfir, sfec;
        u32 fir_addr, fir_clr_addr, fec_addr, sfir_addr, sfec_addr;
        struct pci_dev *pci_dev = cd->pci_dev;

 healthMonitor:
        iterations++;
        if (iterations > 16) {
                dev_err(&pci_dev->dev, "* exit looping after %d times\n",
                        iterations);
                goto fatal_error;
        }

        gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR);
        if (gfir != 0x0)
                dev_err(&pci_dev->dev, "* 0x%08x 0x%016llx\n",
                                    IO_SLC_CFGREG_GFIR, gfir);
        if (gfir == IO_ILLEGAL_VALUE)
                goto fatal_error;

        /*
         * Avoid printing when to GFIR bit is on prevents contignous
         * printout e.g. for the following bug:
         *   FIR set without a 2ndary FIR/FIR cannot be cleared
         * Comment out the following if to get the prints:
         */
        if (gfir == 0)
                return 0;

        gfir_masked = gfir & GFIR_ERR_TRIGGER;  /* fatal errors */

        for (uid = 0; uid < GENWQE_MAX_UNITS; uid++) { /* 0..2 in zEDC */

                /* read the primary FIR (pfir) */
                fir_addr = (uid << 24) + 0x08;
                fir = __genwqe_readq(cd, fir_addr);
                if (fir == 0x0)
                        continue;  /* no error in this unit */

                dev_err(&pci_dev->dev, "* 0x%08x 0x%016llx\n", fir_addr, fir);
                if (fir == IO_ILLEGAL_VALUE)
                        goto fatal_error;

                /* read primary FEC */
                fec_addr = (uid << 24) + 0x18;
                fec = __genwqe_readq(cd, fec_addr);

                dev_err(&pci_dev->dev, "* 0x%08x 0x%016llx\n", fec_addr, fec);
                if (fec == IO_ILLEGAL_VALUE)
                        goto fatal_error;

                for (j = 0, mask = 1ULL; j < 64; j++, mask <<= 1) {

                        /* secondary fir empty, skip it */
                        if ((fir & mask) == 0x0)
                                continue;

                        sfir_addr = (uid << 24) + 0x100 + 0x08 * j;
                        sfir = __genwqe_readq(cd, sfir_addr);

                        if (sfir == IO_ILLEGAL_VALUE)
                                goto fatal_error;
                        dev_err(&pci_dev->dev,
                                "* 0x%08x 0x%016llx\n", sfir_addr, sfir);

                        sfec_addr = (uid << 24) + 0x300 + 0x08 * j;
                        sfec = __genwqe_readq(cd, sfec_addr);

                        if (sfec == IO_ILLEGAL_VALUE)
                                goto fatal_error;
                        dev_err(&pci_dev->dev,
                                "* 0x%08x 0x%016llx\n", sfec_addr, sfec);

                        gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR);
                        if (gfir == IO_ILLEGAL_VALUE)
                                goto fatal_error;

                        /* gfir turned on during routine! get out and
                           start over. */
                        if ((gfir_masked == 0x0) &&
                            (gfir & GFIR_ERR_TRIGGER)) {
                                goto healthMonitor;
                        }

                        /* do not clear if we entered with a fatal gfir */
                        if (gfir_masked == 0x0) {

                                /* NEW clear by mask the logged bits */
                                sfir_addr = (uid << 24) + 0x100 + 0x08 * j;
                                __genwqe_writeq(cd, sfir_addr, sfir);

                                dev_dbg(&pci_dev->dev,
                                        "[HM] Clearing  2ndary FIR 0x%08x with 0x%016llx\n",
                                        sfir_addr, sfir);

                                /*
                                 * note, these cannot be error-Firs
                                 * since gfir_masked is 0 after sfir
                                 * was read. Also, it is safe to do
                                 * this write if sfir=0. Still need to
                                 * clear the primary. This just means
                                 * there is no secondary FIR.
                                 */

                                /* clear by mask the logged bit. */
                                fir_clr_addr = (uid << 24) + 0x10;
                                __genwqe_writeq(cd, fir_clr_addr, mask);

                                dev_dbg(&pci_dev->dev,
                                        "[HM] Clearing primary FIR 0x%08x with 0x%016llx\n",
                                        fir_clr_addr, mask);
                        }
                }
        }
        gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR);
        if (gfir == IO_ILLEGAL_VALUE)
                goto fatal_error;

        if ((gfir_masked == 0x0) && (gfir & GFIR_ERR_TRIGGER)) {
                /*
                 * Check once more that it didn't go on after all the
                 * FIRS were cleared.
                 */
                dev_dbg(&pci_dev->dev, "ACK! Another FIR! Recursing %d!\n",
                        iterations);
                goto healthMonitor;
        }
        return gfir_masked;

 fatal_error:
        return IO_ILLEGAL_VALUE;
}

/**
 * genwqe_pci_fundamental_reset() - trigger a PCIe fundamental reset on the slot
 *
 * Note: pci_set_pcie_reset_state() is not implemented on all archs, so this
 * reset method will not work in all cases.
 *
 * Return: 0 on success or error code from pci_set_pcie_reset_state()
 */
static int genwqe_pci_fundamental_reset(struct pci_dev *pci_dev)
{
        int rc;

        /*
         * lock pci config space access from userspace,
         * save state and issue PCIe fundamental reset
         */
        pci_cfg_access_lock(pci_dev);
        pci_save_state(pci_dev);
        rc = pci_set_pcie_reset_state(pci_dev, pcie_warm_reset);
        if (!rc) {
                /* keep PCIe reset asserted for 250ms */
                msleep(250);
                pci_set_pcie_reset_state(pci_dev, pcie_deassert_reset);
                /* Wait for 2s to reload flash and train the link */
                msleep(2000);
        }
        pci_restore_state(pci_dev);
        pci_cfg_access_unlock(pci_dev);
        return rc;
}


static int genwqe_platform_recovery(struct genwqe_dev *cd)
{
        struct pci_dev *pci_dev = cd->pci_dev;
        int rc;

        dev_info(&pci_dev->dev,
                 "[%s] resetting card for error recovery\n", __func__);

        /* Clear out error injection flags */
        cd->err_inject &= ~(GENWQE_INJECT_HARDWARE_FAILURE |
                            GENWQE_INJECT_GFIR_FATAL |
                            GENWQE_INJECT_GFIR_INFO);

        genwqe_stop(cd);

        /* Try recoverying the card with fundamental reset */
        rc = genwqe_pci_fundamental_reset(pci_dev);
        if (!rc) {
                rc = genwqe_start(cd);
                if (!rc)
                        dev_info(&pci_dev->dev,
                                 "[%s] card recovered\n", __func__);
                else
                        dev_err(&pci_dev->dev,
                                "[%s] err: cannot start card services! (err=%d)\n",
                                __func__, rc);
        } else {
                dev_err(&pci_dev->dev,
                        "[%s] card reset failed\n", __func__);
        }

        return rc;
}

/*
 * genwqe_reload_bistream() - reload card bitstream
 *
 * Set the appropriate register and call fundamental reset to reaload the card
 * bitstream.
 *
 * Return: 0 on success, error code otherwise
 */
static int genwqe_reload_bistream(struct genwqe_dev *cd)
{
        struct pci_dev *pci_dev = cd->pci_dev;
        int rc;

        dev_info(&pci_dev->dev,
                 "[%s] resetting card for bitstream reload\n",
                 __func__);

        genwqe_stop(cd);

        /*
         * Cause a CPLD reprogram with the 'next_bitstream'
         * partition on PCIe hot or fundamental reset
         */
        __genwqe_writeq(cd, IO_SLC_CFGREG_SOFTRESET,
                        (cd->softreset & 0xcull) | 0x70ull);

        rc = genwqe_pci_fundamental_reset(pci_dev);
        if (rc) {
                /*
                 * A fundamental reset failure can be caused
                 * by lack of support on the arch, so we just
                 * log the error and try to start the card
                 * again.
                 */
                dev_err(&pci_dev->dev,
                        "[%s] err: failed to reset card for bitstream reload\n",
                        __func__);
        }

        rc = genwqe_start(cd);
        if (rc) {
                dev_err(&pci_dev->dev,
                        "[%s] err: cannot start card services! (err=%d)\n",
                        __func__, rc);
                return rc;
        }
        dev_info(&pci_dev->dev,
                 "[%s] card reloaded\n", __func__);
        return 0;
}


/**
 * genwqe_health_thread() - Health checking thread
 *
 * This thread is only started for the PF of the card.
 *
 * This thread monitors the health of the card. A critical situation
 * is when we read registers which contain -1 (IO_ILLEGAL_VALUE). In
 * this case we need to be recovered from outside. Writing to
 * registers will very likely not work either.
 *
 * This thread must only exit if kthread_should_stop() becomes true.
 *
 * Condition for the health-thread to trigger:
 *   a) when a kthread_stop() request comes in or
 *   b) a critical GFIR occured
 *
 * Informational GFIRs are checked and potentially printed in
 * health_check_interval seconds.
 */
static int genwqe_health_thread(void *data)
{
        int rc, should_stop = 0;
        struct genwqe_dev *cd = data;
        struct pci_dev *pci_dev = cd->pci_dev;
        u64 gfir, gfir_masked, slu_unitcfg, app_unitcfg;

 health_thread_begin:
        while (!kthread_should_stop()) {
                rc = wait_event_interruptible_timeout(cd->health_waitq,
                         (genwqe_health_check_cond(cd, &gfir) ||
                          (should_stop = kthread_should_stop())),
                                genwqe_health_check_interval * HZ);

                if (should_stop)
                        break;

                if (gfir == IO_ILLEGAL_VALUE) {
                        dev_err(&pci_dev->dev,
                                "[%s] GFIR=%016llx\n", __func__, gfir);
                        goto fatal_error;
                }

                slu_unitcfg = __genwqe_readq(cd, IO_SLU_UNITCFG);
                if (slu_unitcfg == IO_ILLEGAL_VALUE) {
                        dev_err(&pci_dev->dev,
                                "[%s] SLU_UNITCFG=%016llx\n",
                                __func__, slu_unitcfg);
                        goto fatal_error;
                }

                app_unitcfg = __genwqe_readq(cd, IO_APP_UNITCFG);
                if (app_unitcfg == IO_ILLEGAL_VALUE) {
                        dev_err(&pci_dev->dev,
                                "[%s] APP_UNITCFG=%016llx\n",
                                __func__, app_unitcfg);
                        goto fatal_error;
                }

                gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR);
                if (gfir == IO_ILLEGAL_VALUE) {
                        dev_err(&pci_dev->dev,
                                "[%s] %s: GFIR=%016llx\n", __func__,
                                (gfir & GFIR_ERR_TRIGGER) ? "err" : "info",
                                gfir);
                        goto fatal_error;
                }

                gfir_masked = genwqe_fir_checking(cd);
                if (gfir_masked == IO_ILLEGAL_VALUE)
                        goto fatal_error;

                /*
                 * GFIR ErrorTrigger bits set => reset the card!
                 * Never do this for old/manufacturing images!
                 */
                if ((gfir_masked) && !cd->skip_recovery &&
                    genwqe_recovery_on_fatal_gfir_required(cd)) {

                        cd->card_state = GENWQE_CARD_FATAL_ERROR;

                        rc = genwqe_recover_card(cd, 0);
                        if (rc < 0) {
                                /* FIXME Card is unusable and needs unbind! */
                                goto fatal_error;
                        }
                }

                if (cd->card_state == GENWQE_CARD_RELOAD_BITSTREAM) {
                        /* Userspace requested card bitstream reload */
                        rc = genwqe_reload_bistream(cd);
                        if (rc)
                                goto fatal_error;
                }

                cd->last_gfir = gfir;
                cond_resched();
        }

        return 0;

 fatal_error:
        if (cd->use_platform_recovery) {
                /*
                 * Since we use raw accessors, EEH errors won't be detected
                 * by the platform until we do a non-raw MMIO or config space
                 * read
                 */
                readq(cd->mmio + IO_SLC_CFGREG_GFIR);

                /* We do nothing if the card is going over PCI recovery */
                if (pci_channel_offline(pci_dev))
                        return -EIO;

                /*
                 * If it's supported by the platform, we try a fundamental reset
                 * to recover from a fatal error. Otherwise, we continue to wait
                 * for an external recovery procedure to take care of it.
                 */
                rc = genwqe_platform_recovery(cd);
                if (!rc)
                        goto health_thread_begin;
        }

        dev_err(&pci_dev->dev,
                "[%s] card unusable. Please trigger unbind!\n", __func__);

        /* Bring down logical devices to inform user space via udev remove. */
        cd->card_state = GENWQE_CARD_FATAL_ERROR;
        genwqe_stop(cd);

        /* genwqe_bus_reset failed(). Now wait for genwqe_remove(). */
        while (!kthread_should_stop())
                cond_resched();

        return -EIO;
}

static int genwqe_health_check_start(struct genwqe_dev *cd)
{
        int rc;

        if (genwqe_health_check_interval <= 0)
                return 0;       /* valid for disabling the service */

        /* moved before request_irq() */
        /* init_waitqueue_head(&cd->health_waitq); */

        cd->health_thread = kthread_run(genwqe_health_thread, cd,
                                        GENWQE_DEVNAME "%d_health",
                                        cd->card_idx);
        if (IS_ERR(cd->health_thread)) {
                rc = PTR_ERR(cd->health_thread);
                cd->health_thread = NULL;
                return rc;
        }
        return 0;
}

static int genwqe_health_thread_running(struct genwqe_dev *cd)
{
        return cd->health_thread != NULL;
}

static int genwqe_health_check_stop(struct genwqe_dev *cd)
{
        int rc;

        if (!genwqe_health_thread_running(cd))
                return -EIO;

        rc = kthread_stop(cd->health_thread);
        cd->health_thread = NULL;
        return 0;
}

/**
 * genwqe_pci_setup() - Allocate PCIe related resources for our card
 */
static int genwqe_pci_setup(struct genwqe_dev *cd)
{
        int err, bars;
        struct pci_dev *pci_dev = cd->pci_dev;

        bars = pci_select_bars(pci_dev, IORESOURCE_MEM);
        err = pci_enable_device_mem(pci_dev);
        if (err) {
                dev_err(&pci_dev->dev,
                        "err: failed to enable pci memory (err=%d)\n", err);
                goto err_out;
        }

        /* Reserve PCI I/O and memory resources */
        err = pci_request_selected_regions(pci_dev, bars, genwqe_driver_name);
        if (err) {
                dev_err(&pci_dev->dev,
                        "[%s] err: request bars failed (%d)\n", __func__, err);
                err = -EIO;
                goto err_disable_device;
        }

        /* check for 64-bit DMA address supported (DAC) */
        if (!pci_set_dma_mask(pci_dev, DMA_BIT_MASK(64))) {
                err = pci_set_consistent_dma_mask(pci_dev, DMA_BIT_MASK(64));
                if (err) {
                        dev_err(&pci_dev->dev,
                                "err: DMA64 consistent mask error\n");
                        err = -EIO;
                        goto out_release_resources;
                }
        /* check for 32-bit DMA address supported (SAC) */
        } else if (!pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32))) {
                err = pci_set_consistent_dma_mask(pci_dev, DMA_BIT_MASK(32));
                if (err) {
                        dev_err(&pci_dev->dev,
                                "err: DMA32 consistent mask error\n");
                        err = -EIO;
                        goto out_release_resources;
                }
        } else {
                dev_err(&pci_dev->dev,
                        "err: neither DMA32 nor DMA64 supported\n");
                err = -EIO;
                goto out_release_resources;
        }

        pci_set_master(pci_dev);
        pci_enable_pcie_error_reporting(pci_dev);

        /* EEH recovery requires PCIe fundamental reset */
        pci_dev->needs_freset = 1;

        /* request complete BAR-0 space (length = 0) */
        cd->mmio_len = pci_resource_len(pci_dev, 0);
        cd->mmio = pci_iomap(pci_dev, 0, 0);
        if (cd->mmio == NULL) {
                dev_err(&pci_dev->dev,
                        "[%s] err: mapping BAR0 failed\n", __func__);
                err = -ENOMEM;
                goto out_release_resources;
        }

        cd->num_vfs = pci_sriov_get_totalvfs(pci_dev);
        if (cd->num_vfs < 0)
                cd->num_vfs = 0;

        err = genwqe_read_ids(cd);
        if (err)
                goto out_iounmap;

        return 0;

 out_iounmap:
        pci_iounmap(pci_dev, cd->mmio);
 out_release_resources:
        pci_release_selected_regions(pci_dev, bars);
 err_disable_device:
        pci_disable_device(pci_dev);
 err_out:
        return err;
}

/**
 * genwqe_pci_remove() - Free PCIe related resources for our card
 */
static void genwqe_pci_remove(struct genwqe_dev *cd)
{
        int bars;
        struct pci_dev *pci_dev = cd->pci_dev;

        if (cd->mmio)
                pci_iounmap(pci_dev, cd->mmio);

        bars = pci_select_bars(pci_dev, IORESOURCE_MEM);
        pci_release_selected_regions(pci_dev, bars);
        pci_disable_device(pci_dev);
}

/**
 * genwqe_probe() - Device initialization
 * @pdev:       PCI device information struct
 *
 * Callable for multiple cards. This function is called on bind.
 *
 * Return: 0 if succeeded, < 0 when failed
 */
static int genwqe_probe(struct pci_dev *pci_dev,
                        const struct pci_device_id *id)
{
        int err;
        struct genwqe_dev *cd;

        genwqe_init_crc32();

        cd = genwqe_dev_alloc();
        if (IS_ERR(cd)) {
                dev_err(&pci_dev->dev, "err: could not alloc mem (err=%d)!\n",
                        (int)PTR_ERR(cd));
                return PTR_ERR(cd);
        }

        dev_set_drvdata(&pci_dev->dev, cd);
        cd->pci_dev = pci_dev;

        err = genwqe_pci_setup(cd);
        if (err < 0) {
                dev_err(&pci_dev->dev,
                        "err: problems with PCI setup (err=%d)\n", err);
                goto out_free_dev;
        }

        err = genwqe_start(cd);
        if (err < 0) {
                dev_err(&pci_dev->dev,
                        "err: cannot start card services! (err=%d)\n", err);
                goto out_pci_remove;
        }

        if (genwqe_is_privileged(cd)) {
                err = genwqe_health_check_start(cd);
                if (err < 0) {
                        dev_err(&pci_dev->dev,
                                "err: cannot start health checking! (err=%d)\n",
                                err);
                        goto out_stop_services;
                }
        }
        return 0;

 out_stop_services:
        genwqe_stop(cd);
 out_pci_remove:
        genwqe_pci_remove(cd);
 out_free_dev:
        genwqe_dev_free(cd);
        return err;
}

/**
 * genwqe_remove() - Called when device is removed (hot-plugable)
 *
 * Or when driver is unloaded respecitively when unbind is done.
 */
static void genwqe_remove(struct pci_dev *pci_dev)
{
        struct genwqe_dev *cd = dev_get_drvdata(&pci_dev->dev);

        genwqe_health_check_stop(cd);

        /*
         * genwqe_stop() must survive if it is called twice
         * sequentially. This happens when the health thread calls it
         * and fails on genwqe_bus_reset().
         */
        genwqe_stop(cd);
        genwqe_pci_remove(cd);
        genwqe_dev_free(cd);
}

/*
 * genwqe_err_error_detected() - Error detection callback
 *
 * This callback is called by the PCI subsystem whenever a PCI bus
 * error is detected.
 */
static pci_ers_result_t genwqe_err_error_detected(struct pci_dev *pci_dev,
                                                 enum pci_channel_state state)
{
        struct genwqe_dev *cd;

        dev_err(&pci_dev->dev, "[%s] state=%d\n", __func__, state);

        cd = dev_get_drvdata(&pci_dev->dev);
        if (cd == NULL)
                return PCI_ERS_RESULT_DISCONNECT;

        /* Stop the card */
        genwqe_health_check_stop(cd);
        genwqe_stop(cd);

        /*
         * On permanent failure, the PCI code will call device remove
         * after the return of this function.
         * genwqe_stop() can be called twice.
         */
        if (state == pci_channel_io_perm_failure) {
                return PCI_ERS_RESULT_DISCONNECT;
        } else {
                genwqe_pci_remove(cd);
                return PCI_ERS_RESULT_NEED_RESET;
        }
}

static pci_ers_result_t genwqe_err_slot_reset(struct pci_dev *pci_dev)
{
        int rc;
        struct genwqe_dev *cd = dev_get_drvdata(&pci_dev->dev);

        rc = genwqe_pci_setup(cd);
        if (!rc) {
                return PCI_ERS_RESULT_RECOVERED;
        } else {
                dev_err(&pci_dev->dev,
                        "err: problems with PCI setup (err=%d)\n", rc);
                return PCI_ERS_RESULT_DISCONNECT;
        }
}

static pci_ers_result_t genwqe_err_result_none(struct pci_dev *dev)
{
        return PCI_ERS_RESULT_NONE;
}

static void genwqe_err_resume(struct pci_dev *pci_dev)
{
        int rc;
        struct genwqe_dev *cd = dev_get_drvdata(&pci_dev->dev);

        rc = genwqe_start(cd);
        if (!rc) {
                rc = genwqe_health_check_start(cd);
                if (rc)
                        dev_err(&pci_dev->dev,
                                "err: cannot start health checking! (err=%d)\n",
                                rc);
        } else {
                dev_err(&pci_dev->dev,
                        "err: cannot start card services! (err=%d)\n", rc);
        }
}

static int genwqe_sriov_configure(struct pci_dev *dev, int numvfs)
{
        int rc;
        struct genwqe_dev *cd = dev_get_drvdata(&dev->dev);

        if (numvfs > 0) {
                genwqe_setup_vf_jtimer(cd);
                rc = pci_enable_sriov(dev, numvfs);
                if (rc < 0)
                        return rc;
                return numvfs;
        }
        if (numvfs == 0) {
                pci_disable_sriov(dev);
                return 0;
        }
        return 0;
}

static struct pci_error_handlers genwqe_err_handler = {
        .error_detected = genwqe_err_error_detected,
        .mmio_enabled   = genwqe_err_result_none,
        .link_reset     = genwqe_err_result_none,
        .slot_reset     = genwqe_err_slot_reset,
        .resume         = genwqe_err_resume,
};

static struct pci_driver genwqe_driver = {
        .name     = genwqe_driver_name,
        .id_table = genwqe_device_table,
        .probe    = genwqe_probe,
        .remove   = genwqe_remove,
        .sriov_configure = genwqe_sriov_configure,
        .err_handler = &genwqe_err_handler,
};

/**
 * genwqe_init_module() - Driver registration and initialization
 */
static int __init genwqe_init_module(void)
{
        int rc;

        class_genwqe = class_create(THIS_MODULE, GENWQE_DEVNAME);
        if (IS_ERR(class_genwqe)) {
                pr_err("[%s] create class failed\n", __func__);
                return -ENOMEM;
        }

        debugfs_genwqe = debugfs_create_dir(GENWQE_DEVNAME, NULL);
        if (!debugfs_genwqe) {
                rc = -ENOMEM;
                goto err_out;
        }

        rc = pci_register_driver(&genwqe_driver);
        if (rc != 0) {
                pr_err("[%s] pci_reg_driver (rc=%d)\n", __func__, rc);
                goto err_out0;
        }

        return rc;

 err_out0:
        debugfs_remove(debugfs_genwqe);
 err_out:
        class_destroy(class_genwqe);
        return rc;
}

/**
 * genwqe_exit_module() - Driver exit
 */
static void __exit genwqe_exit_module(void)
{
        pci_unregister_driver(&genwqe_driver);
        debugfs_remove(debugfs_genwqe);
        class_destroy(class_genwqe);
}

module_init(genwqe_init_module);
module_exit(genwqe_exit_module);