drivers/net/phy/smsc.c

   1 /*
   2  * drivers/net/phy/smsc.c
   3  *
   4  * Driver for SMSC PHYs
   5  *
   6  * Author: Herbert Valerio Riedel
   7  *
   8  * Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org>
   9  *
  10  * This program is free software; you can redistribute  it and/or modify it
  11  * under  the terms of  the GNU General  Public License as published by the
  12  * Free Software Foundation;  either version 2 of the  License, or (at your
  13  * option) any later version.
  14  *
  15  * Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@shawell.net
  16  *
  17  */
  18
  19 #include <linux/kernel.h>
  20 #include <linux/module.h>
  21 #include <linux/mii.h>
  22 #include <linux/ethtool.h>
  23 #include <linux/phy.h>
  24 #include <linux/netdevice.h>
  25 #include <linux/smscphy.h>
  26
  27 static int smsc_phy_config_intr(struct phy_device *phydev)
  28 {
  29         int rc = phy_write (phydev, MII_LAN83C185_IM,
  30                         ((PHY_INTERRUPT_ENABLED == phydev->interrupts)
  31                         ? MII_LAN83C185_ISF_INT_PHYLIB_EVENTS
  32                         : 0));
  33
  34         return rc < 0 ? rc : 0;
  35 }
  36
  37 static int smsc_phy_ack_interrupt(struct phy_device *phydev)
  38 {
  39         int rc = phy_read (phydev, MII_LAN83C185_ISF);
  40
  41         return rc < 0 ? rc : 0;
  42 }
  43
  44 static int smsc_phy_config_init(struct phy_device *phydev)
  45 {
  46         int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
  47
  48         if (rc < 0)
  49                 return rc;
  50
  51         /* Enable energy detect mode for this SMSC Transceivers */
  52         rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
  53                        rc | MII_LAN83C185_EDPWRDOWN);
  54         if (rc < 0)
  55                 return rc;
  56
  57         return smsc_phy_ack_interrupt(phydev);
  58 }
  59
  60 static int smsc_phy_reset(struct phy_device *phydev)
  61 {
  62         int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
  63         if (rc < 0)
  64                 return rc;
  65
  66         /* If the SMSC PHY is in power down mode, then set it
  67          * in all capable mode before using it.
  68          */
  69         if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) {
  70                 int timeout = 50000;
  71
  72                 /* set "all capable" mode and reset the phy */
  73                 rc |= MII_LAN83C185_MODE_ALL;
  74                 phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc);
  75                 phy_write(phydev, MII_BMCR, BMCR_RESET);
  76
  77                 /* wait end of reset (max 500 ms) */
  78                 do {
  79                         udelay(10);
  80                         if (timeout-- == 0)
  81                                 return -1;
  82                         rc = phy_read(phydev, MII_BMCR);
  83                 } while (rc & BMCR_RESET);
  84         }
  85         return 0;
  86 }
  87
  88 static int lan911x_config_init(struct phy_device *phydev)
  89 {
  90         return smsc_phy_ack_interrupt(phydev);
  91 }
  92
  93 /*
  94  * The LAN8710/LAN8720 requires a minimum of 2 link pulses within 64ms of each
  95  * other in order to set the ENERGYON bit and exit EDPD mode.  If a link partner
  96  * does send the pulses within this interval, the PHY will remained powered
  97  * down.
  98  *
  99  * This workaround will manually toggle the PHY on/off upon calls to read_status
 100  * in order to generate link test pulses if the link is down.  If a link partner
 101  * is present, it will respond to the pulses, which will cause the ENERGYON bit
 102  * to be set and will cause the EDPD mode to be exited.
 103  */
 104 static int lan87xx_read_status(struct phy_device *phydev)
 105 {
 106         int err = genphy_read_status(phydev);
 107
 108         if (!phydev->link) {
 109                 /* Disable EDPD to wake up PHY */
 110                 int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
 111                 if (rc < 0)
 112                         return rc;
 113
 114                 rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
 115                                rc & ~MII_LAN83C185_EDPWRDOWN);
 116                 if (rc < 0)
 117                         return rc;
 118
 119                 /* Sleep 64 ms to allow ~5 link test pulses to be sent */
 120                 msleep(64);
 121
 122                 /* Re-enable EDPD */
 123                 rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
 124                 if (rc < 0)
 125                         return rc;
 126
 127                 rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
 128                                rc | MII_LAN83C185_EDPWRDOWN);
 129                 if (rc < 0)
 130                         return rc;
 131         }
 132
 133         return err;
 134 }
 135
 136 static struct phy_driver smsc_phy_driver[] = {
 137 {
 138         .phy_id         = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
 139         .phy_id_mask    = 0xfffffff0,
 140         .name           = "SMSC LAN83C185",
 141
 142         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause
 143                                 | SUPPORTED_Asym_Pause),
 144         .flags          = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
 145
 146         /* basic functions */
 147         .config_aneg    = genphy_config_aneg,
 148         .read_status    = genphy_read_status,
 149         .config_init    = smsc_phy_config_init,
 150         .soft_reset     = smsc_phy_reset,
 151
 152         /* IRQ related */
 153         .ack_interrupt  = smsc_phy_ack_interrupt,
 154         .config_intr    = smsc_phy_config_intr,
 155
 156         .suspend        = genphy_suspend,
 157         .resume         = genphy_resume,
 158
 159         .driver         = { .owner = THIS_MODULE, }
 160 }, {
 161         .phy_id         = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */
 162         .phy_id_mask    = 0xfffffff0,
 163         .name           = "SMSC LAN8187",
 164
 165         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause
 166                                 | SUPPORTED_Asym_Pause),
 167         .flags          = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
 168
 169         /* basic functions */
 170         .config_aneg    = genphy_config_aneg,
 171         .read_status    = genphy_read_status,
 172         .config_init    = smsc_phy_config_init,
 173         .soft_reset     = smsc_phy_reset,
 174
 175         /* IRQ related */
 176         .ack_interrupt  = smsc_phy_ack_interrupt,
 177         .config_intr    = smsc_phy_config_intr,
 178
 179         .suspend        = genphy_suspend,
 180         .resume         = genphy_resume,
 181
 182         .driver         = { .owner = THIS_MODULE, }
 183 }, {
 184         .phy_id         = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */
 185         .phy_id_mask    = 0xfffffff0,
 186         .name           = "SMSC LAN8700",
 187
 188         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause
 189                                 | SUPPORTED_Asym_Pause),
 190         .flags          = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
 191
 192         /* basic functions */
 193         .config_aneg    = genphy_config_aneg,
 194         .read_status    = genphy_read_status,
 195         .config_init    = smsc_phy_config_init,
 196         .soft_reset     = smsc_phy_reset,
 197
 198         /* IRQ related */
 199         .ack_interrupt  = smsc_phy_ack_interrupt,
 200         .config_intr    = smsc_phy_config_intr,
 201
 202         .suspend        = genphy_suspend,
 203         .resume         = genphy_resume,
 204
 205         .driver         = { .owner = THIS_MODULE, }
 206 }, {
 207         .phy_id         = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */
 208         .phy_id_mask    = 0xfffffff0,
 209         .name           = "SMSC LAN911x Internal PHY",
 210
 211         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause
 212                                 | SUPPORTED_Asym_Pause),
 213         .flags          = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
 214
 215         /* basic functions */
 216         .config_aneg    = genphy_config_aneg,
 217         .read_status    = genphy_read_status,
 218         .config_init    = lan911x_config_init,
 219
 220         /* IRQ related */
 221         .ack_interrupt  = smsc_phy_ack_interrupt,
 222         .config_intr    = smsc_phy_config_intr,
 223
 224         .suspend        = genphy_suspend,
 225         .resume         = genphy_resume,
 226
 227         .driver         = { .owner = THIS_MODULE, }
 228 }, {
 229         .phy_id         = 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */
 230         .phy_id_mask    = 0xfffffff0,
 231         .name           = "SMSC LAN8710/LAN8720",
 232
 233         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause
 234                                 | SUPPORTED_Asym_Pause),
 235         .flags          = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
 236
 237         /* basic functions */
 238         .config_aneg    = genphy_config_aneg,
 239         .read_status    = lan87xx_read_status,
 240         .config_init    = smsc_phy_config_init,
 241         .soft_reset     = smsc_phy_reset,
 242
 243         /* IRQ related */
 244         .ack_interrupt  = smsc_phy_ack_interrupt,
 245         .config_intr    = smsc_phy_config_intr,
 246
 247         .suspend        = genphy_suspend,
 248         .resume         = genphy_resume,
 249
 250         .driver         = { .owner = THIS_MODULE, }
 251 } };
 252
 253 module_phy_driver(smsc_phy_driver);
 254
 255 MODULE_DESCRIPTION("SMSC PHY driver");
 256 MODULE_AUTHOR("Herbert Valerio Riedel");
 257 MODULE_LICENSE("GPL");
 258
 259 static struct mdio_device_id __maybe_unused smsc_tbl[] = {
 260         { 0x0007c0a0, 0xfffffff0 },
 261         { 0x0007c0b0, 0xfffffff0 },
 262         { 0x0007c0c0, 0xfffffff0 },
 263         { 0x0007c0d0, 0xfffffff0 },
 264         { 0x0007c0f0, 0xfffffff0 },
 265         { }
 266 };
 267
 268 MODULE_DEVICE_TABLE(mdio, smsc_tbl);