drivers/net/wan/hd64570.h

   1 #ifndef __HD64570_H
   2 #define __HD64570_H
   3
   4 /* SCA HD64570 register definitions - all addresses for mode 0 (8086 MPU)
   5    and 1 (64180 MPU). For modes 2 and 3, XOR the address with 0x01.
   6
   7    Source: HD64570 SCA User's Manual
   8 */
   9
  10
  11
  12 /* SCA Control Registers */
  13 #define LPR    0x00             /* Low Power */
  14
  15 /* Wait controller registers */
  16 #define PABR0  0x02             /* Physical Address Boundary 0 */
  17 #define PABR1  0x03             /* Physical Address Boundary 1 */
  18 #define WCRL   0x04             /* Wait Control L */
  19 #define WCRM   0x05             /* Wait Control M */
  20 #define WCRH   0x06             /* Wait Control H */
  21
  22 #define PCR    0x08             /* DMA Priority Control */
  23 #define DMER   0x09             /* DMA Master Enable */
  24
  25
  26 /* Interrupt registers */
  27 #define ISR0   0x10             /* Interrupt Status 0  */
  28 #define ISR1   0x11             /* Interrupt Status 1  */
  29 #define ISR2   0x12             /* Interrupt Status 2  */
  30
  31 #define IER0   0x14             /* Interrupt Enable 0  */
  32 #define IER1   0x15             /* Interrupt Enable 1  */
  33 #define IER2   0x16             /* Interrupt Enable 2  */
  34
  35 #define ITCR   0x18             /* Interrupt Control */
  36 #define IVR    0x1A             /* Interrupt Vector */
  37 #define IMVR   0x1C             /* Interrupt Modified Vector */
  38
  39
  40
  41 /* MSCI channel (port) 0 registers - offset 0x20
  42    MSCI channel (port) 1 registers - offset 0x40 */
  43
  44 #define MSCI0_OFFSET 0x20
  45 #define MSCI1_OFFSET 0x40
  46
  47 #define TRBL   0x00             /* TX/RX buffer L */
  48 #define TRBH   0x01             /* TX/RX buffer H */
  49 #define ST0    0x02             /* Status 0 */
  50 #define ST1    0x03             /* Status 1 */
  51 #define ST2    0x04             /* Status 2 */
  52 #define ST3    0x05             /* Status 3 */
  53 #define FST    0x06             /* Frame Status  */
  54 #define IE0    0x08             /* Interrupt Enable 0 */
  55 #define IE1    0x09             /* Interrupt Enable 1 */
  56 #define IE2    0x0A             /* Interrupt Enable 2 */
  57 #define FIE    0x0B             /* Frame Interrupt Enable  */
  58 #define CMD    0x0C             /* Command */
  59 #define MD0    0x0E             /* Mode 0 */
  60 #define MD1    0x0F             /* Mode 1 */
  61 #define MD2    0x10             /* Mode 2 */
  62 #define CTL    0x11             /* Control */
  63 #define SA0    0x12             /* Sync/Address 0 */
  64 #define SA1    0x13             /* Sync/Address 1 */
  65 #define IDL    0x14             /* Idle Pattern */
  66 #define TMC    0x15             /* Time Constant */
  67 #define RXS    0x16             /* RX Clock Source */
  68 #define TXS    0x17             /* TX Clock Source */
  69 #define TRC0   0x18             /* TX Ready Control 0 */
  70 #define TRC1   0x19             /* TX Ready Control 1 */
  71 #define RRC    0x1A             /* RX Ready Control */
  72 #define CST0   0x1C             /* Current Status 0 */
  73 #define CST1   0x1D             /* Current Status 1 */
  74
  75
  76 /* Timer channel 0 (port 0 RX) registers - offset 0x60
  77    Timer channel 1 (port 0 TX) registers - offset 0x68
  78    Timer channel 2 (port 1 RX) registers - offset 0x70
  79    Timer channel 3 (port 1 TX) registers - offset 0x78
  80 */
  81
  82 #define TIMER0RX_OFFSET 0x60
  83 #define TIMER0TX_OFFSET 0x68
  84 #define TIMER1RX_OFFSET 0x70
  85 #define TIMER1TX_OFFSET 0x78
  86
  87 #define TCNTL  0x00             /* Up-counter L */
  88 #define TCNTH  0x01             /* Up-counter H */
  89 #define TCONRL 0x02             /* Constant L */
  90 #define TCONRH 0x03             /* Constant H */
  91 #define TCSR   0x04             /* Control/Status */
  92 #define TEPR   0x05             /* Expand Prescale */
  93
  94
  95
  96 /* DMA channel 0 (port 0 RX) registers - offset 0x80
  97    DMA channel 1 (port 0 TX) registers - offset 0xA0
  98    DMA channel 2 (port 1 RX) registers - offset 0xC0
  99    DMA channel 3 (port 1 TX) registers - offset 0xE0
 100 */
 101
 102 #define DMAC0RX_OFFSET 0x80
 103 #define DMAC0TX_OFFSET 0xA0
 104 #define DMAC1RX_OFFSET 0xC0
 105 #define DMAC1TX_OFFSET 0xE0
 106
 107 #define BARL   0x00             /* Buffer Address L (chained block) */
 108 #define BARH   0x01             /* Buffer Address H (chained block) */
 109 #define BARB   0x02             /* Buffer Address B (chained block) */
 110
 111 #define DARL   0x00             /* RX Destination Addr L (single block) */
 112 #define DARH   0x01             /* RX Destination Addr H (single block) */
 113 #define DARB   0x02             /* RX Destination Addr B (single block) */
 114
 115 #define SARL   0x04             /* TX Source Address L (single block) */
 116 #define SARH   0x05             /* TX Source Address H (single block) */
 117 #define SARB   0x06             /* TX Source Address B (single block) */
 118
 119 #define CPB    0x06             /* Chain Pointer Base (chained block) */
 120
 121 #define CDAL   0x08             /* Current Descriptor Addr L (chained block) */
 122 #define CDAH   0x09             /* Current Descriptor Addr H (chained block) */
 123 #define EDAL   0x0A             /* Error Descriptor Addr L (chained block) */
 124 #define EDAH   0x0B             /* Error Descriptor Addr H (chained block) */
 125 #define BFLL   0x0C             /* RX Receive Buffer Length L (chained block)*/
 126 #define BFLH   0x0D             /* RX Receive Buffer Length H (chained block)*/
 127 #define BCRL   0x0E             /* Byte Count L */
 128 #define BCRH   0x0F             /* Byte Count H */
 129 #define DSR    0x10             /* DMA Status */
 130 #define DSR_RX(node) (DSR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
 131 #define DSR_TX(node) (DSR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
 132 #define DMR    0x11             /* DMA Mode */
 133 #define DMR_RX(node) (DMR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
 134 #define DMR_TX(node) (DMR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
 135 #define FCT    0x13             /* Frame End Interrupt Counter */
 136 #define FCT_RX(node) (FCT + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
 137 #define FCT_TX(node) (FCT + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
 138 #define DIR    0x14             /* DMA Interrupt Enable */
 139 #define DIR_RX(node) (DIR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
 140 #define DIR_TX(node) (DIR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
 141 #define DCR    0x15             /* DMA Command  */
 142 #define DCR_RX(node) (DCR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
 143 #define DCR_TX(node) (DCR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
 144
 145
 146
 147
 148 /* Descriptor Structure */
 149
 150 typedef struct {
 151         u16 cp;                 /* Chain Pointer */
 152         u32 bp;                 /* Buffer Pointer (24 bits) */
 153         u16 len;                /* Data Length */
 154         u8 stat;                /* Status */
 155         u8 unused;              /* pads to 2-byte boundary */
 156 }__packed pkt_desc;
 157
 158
 159 /* Packet Descriptor Status bits */
 160
 161 #define ST_TX_EOM     0x80      /* End of frame */
 162 #define ST_TX_EOT     0x01      /* End of transmission */
 163
 164 #define ST_RX_EOM     0x80      /* End of frame */
 165 #define ST_RX_SHORT   0x40      /* Short frame */
 166 #define ST_RX_ABORT   0x20      /* Abort */
 167 #define ST_RX_RESBIT  0x10      /* Residual bit */
 168 #define ST_RX_OVERRUN 0x08      /* Overrun */
 169 #define ST_RX_CRC     0x04      /* CRC */
 170
 171 #define ST_ERROR_MASK 0x7C
 172
 173 #define DIR_EOTE      0x80      /* Transfer completed */
 174 #define DIR_EOME      0x40      /* Frame Transfer Completed (chained-block) */
 175 #define DIR_BOFE      0x20      /* Buffer Overflow/Underflow (chained-block)*/
 176 #define DIR_COFE      0x10      /* Counter Overflow (chained-block) */
 177
 178
 179 #define DSR_EOT       0x80      /* Transfer completed */
 180 #define DSR_EOM       0x40      /* Frame Transfer Completed (chained-block) */
 181 #define DSR_BOF       0x20      /* Buffer Overflow/Underflow (chained-block)*/
 182 #define DSR_COF       0x10      /* Counter Overflow (chained-block) */
 183 #define DSR_DE        0x02      /* DMA Enable */
 184 #define DSR_DWE       0x01      /* DMA Write Disable */
 185
 186 /* DMA Master Enable Register (DMER) bits */
 187 #define DMER_DME      0x80      /* DMA Master Enable */
 188
 189
 190 #define CMD_RESET     0x21      /* Reset Channel */
 191 #define CMD_TX_ENABLE 0x02      /* Start transmitter */
 192 #define CMD_RX_ENABLE 0x12      /* Start receiver */
 193
 194 #define MD0_HDLC      0x80      /* Bit-sync HDLC mode */
 195 #define MD0_CRC_ENA   0x04      /* Enable CRC code calculation */
 196 #define MD0_CRC_CCITT 0x02      /* CCITT CRC instead of CRC-16 */
 197 #define MD0_CRC_PR1   0x01      /* Initial all-ones instead of all-zeros */
 198
 199 #define MD0_CRC_NONE  0x00
 200 #define MD0_CRC_16_0  0x04
 201 #define MD0_CRC_16    0x05
 202 #define MD0_CRC_ITU_0 0x06
 203 #define MD0_CRC_ITU   0x07
 204
 205 #define MD2_NRZ       0x00
 206 #define MD2_NRZI      0x20
 207 #define MD2_MANCHESTER 0x80
 208 #define MD2_FM_MARK   0xA0
 209 #define MD2_FM_SPACE  0xC0
 210 #define MD2_LOOPBACK  0x03      /* Local data Loopback */
 211
 212 #define CTL_NORTS     0x01
 213 #define CTL_IDLE      0x10      /* Transmit an idle pattern */
 214 #define CTL_UDRNC     0x20      /* Idle after CRC or FCS+flag transmission */
 215
 216 #define ST0_TXRDY     0x02      /* TX ready */
 217 #define ST0_RXRDY     0x01      /* RX ready */
 218
 219 #define ST1_UDRN      0x80      /* MSCI TX underrun */
 220 #define ST1_CDCD      0x04      /* DCD level changed */
 221
 222 #define ST3_CTS       0x08      /* modem input - /CTS */
 223 #define ST3_DCD       0x04      /* modem input - /DCD */
 224
 225 #define IE0_TXINT     0x80      /* TX INT MSCI interrupt enable */
 226 #define IE0_RXINTA    0x40      /* RX INT A MSCI interrupt enable */
 227 #define IE1_UDRN      0x80      /* TX underrun MSCI interrupt enable */
 228 #define IE1_CDCD      0x04      /* DCD level changed */
 229
 230 #define DCR_ABORT     0x01      /* Software abort command */
 231 #define DCR_CLEAR_EOF 0x02      /* Clear EOF interrupt */
 232
 233 /* TX and RX Clock Source - RXS and TXS */
 234 #define CLK_BRG_MASK  0x0F
 235 #define CLK_LINE_RX   0x00      /* TX/RX clock line input */
 236 #define CLK_LINE_TX   0x00      /* TX/RX line input */
 237 #define CLK_BRG_RX    0x40      /* internal baud rate generator */
 238 #define CLK_BRG_TX    0x40      /* internal baud rate generator */
 239 #define CLK_RXCLK_TX  0x60      /* TX clock from RX clock */
 240
 241 #endif