Linux 4.1.16
[linux/fpc-iii.git] / drivers / parport / parport_amiga.c
blob9c68f2aec4ff7f5431057ce5c4978a4894e64bec
1 /* Low-level parallel port routines for the Amiga built-in port
3 * Author: Joerg Dorchain <joerg@dorchain.net>
5 * This is a complete rewrite of the code, but based heaviy upon the old
6 * lp_intern. code.
8 * The built-in Amiga parallel port provides one port at a fixed address
9 * with 8 bidirectional data lines (D0 - D7) and 3 bidirectional status
10 * lines (BUSY, POUT, SEL), 1 output control line /STROBE (raised automatically
11 * in hardware when the data register is accessed), and 1 input control line
12 * /ACK, able to cause an interrupt, but both not directly settable by
13 * software.
16 #include <linux/module.h>
17 #include <linux/init.h>
18 #include <linux/parport.h>
19 #include <linux/ioport.h>
20 #include <linux/interrupt.h>
21 #include <linux/platform_device.h>
23 #include <asm/setup.h>
24 #include <asm/amigahw.h>
25 #include <asm/irq.h>
26 #include <asm/io.h>
27 #include <asm/amigaints.h>
29 #undef DEBUG
30 #ifdef DEBUG
31 #define DPRINTK printk
32 #else
33 #define DPRINTK(x...) do { } while (0)
34 #endif
37 static void amiga_write_data(struct parport *p, unsigned char data)
39 DPRINTK(KERN_DEBUG "write_data %c\n",data);
40 /* Triggers also /STROBE. This behavior cannot be changed */
41 ciaa.prb = data;
42 mb();
45 static unsigned char amiga_read_data(struct parport *p)
47 /* Triggers also /STROBE. This behavior cannot be changed */
48 return ciaa.prb;
51 static unsigned char control_amiga_to_pc(unsigned char control)
53 return PARPORT_CONTROL_SELECT |
54 PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_STROBE;
55 /* fake value: interrupt enable, select in, no reset,
56 no autolf, no strobe - seems to be closest the wiring diagram */
59 static void amiga_write_control(struct parport *p, unsigned char control)
61 DPRINTK(KERN_DEBUG "write_control %02x\n",control);
62 /* No implementation possible */
65 static unsigned char amiga_read_control( struct parport *p)
67 DPRINTK(KERN_DEBUG "read_control \n");
68 return control_amiga_to_pc(0);
71 static unsigned char amiga_frob_control( struct parport *p, unsigned char mask, unsigned char val)
73 unsigned char old;
75 DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val);
76 old = amiga_read_control(p);
77 amiga_write_control(p, (old & ~mask) ^ val);
78 return old;
81 static unsigned char status_amiga_to_pc(unsigned char status)
83 unsigned char ret = PARPORT_STATUS_BUSY | PARPORT_STATUS_ACK | PARPORT_STATUS_ERROR;
85 if (status & 1) /* Busy */
86 ret &= ~PARPORT_STATUS_BUSY;
87 if (status & 2) /* PaperOut */
88 ret |= PARPORT_STATUS_PAPEROUT;
89 if (status & 4) /* Selected */
90 ret |= PARPORT_STATUS_SELECT;
91 /* the rest is not connected or handled autonomously in hardware */
93 return ret;
96 static unsigned char amiga_read_status(struct parport *p)
98 unsigned char status;
100 status = status_amiga_to_pc(ciab.pra & 7);
101 DPRINTK(KERN_DEBUG "read_status %02x\n", status);
102 return status;
105 static void amiga_enable_irq(struct parport *p)
107 enable_irq(IRQ_AMIGA_CIAA_FLG);
110 static void amiga_disable_irq(struct parport *p)
112 disable_irq(IRQ_AMIGA_CIAA_FLG);
115 static void amiga_data_forward(struct parport *p)
117 DPRINTK(KERN_DEBUG "forward\n");
118 ciaa.ddrb = 0xff; /* all pins output */
119 mb();
122 static void amiga_data_reverse(struct parport *p)
124 DPRINTK(KERN_DEBUG "reverse\n");
125 ciaa.ddrb = 0; /* all pins input */
126 mb();
129 static void amiga_init_state(struct pardevice *dev, struct parport_state *s)
131 s->u.amiga.data = 0;
132 s->u.amiga.datadir = 255;
133 s->u.amiga.status = 0;
134 s->u.amiga.statusdir = 0;
137 static void amiga_save_state(struct parport *p, struct parport_state *s)
139 mb();
140 s->u.amiga.data = ciaa.prb;
141 s->u.amiga.datadir = ciaa.ddrb;
142 s->u.amiga.status = ciab.pra & 7;
143 s->u.amiga.statusdir = ciab.ddra & 7;
144 mb();
147 static void amiga_restore_state(struct parport *p, struct parport_state *s)
149 mb();
150 ciaa.prb = s->u.amiga.data;
151 ciaa.ddrb = s->u.amiga.datadir;
152 ciab.pra |= (ciab.pra & 0xf8) | s->u.amiga.status;
153 ciab.ddra |= (ciab.ddra & 0xf8) | s->u.amiga.statusdir;
154 mb();
157 static struct parport_operations pp_amiga_ops = {
158 .write_data = amiga_write_data,
159 .read_data = amiga_read_data,
161 .write_control = amiga_write_control,
162 .read_control = amiga_read_control,
163 .frob_control = amiga_frob_control,
165 .read_status = amiga_read_status,
167 .enable_irq = amiga_enable_irq,
168 .disable_irq = amiga_disable_irq,
170 .data_forward = amiga_data_forward,
171 .data_reverse = amiga_data_reverse,
173 .init_state = amiga_init_state,
174 .save_state = amiga_save_state,
175 .restore_state = amiga_restore_state,
177 .epp_write_data = parport_ieee1284_epp_write_data,
178 .epp_read_data = parport_ieee1284_epp_read_data,
179 .epp_write_addr = parport_ieee1284_epp_write_addr,
180 .epp_read_addr = parport_ieee1284_epp_read_addr,
182 .ecp_write_data = parport_ieee1284_ecp_write_data,
183 .ecp_read_data = parport_ieee1284_ecp_read_data,
184 .ecp_write_addr = parport_ieee1284_ecp_write_addr,
186 .compat_write_data = parport_ieee1284_write_compat,
187 .nibble_read_data = parport_ieee1284_read_nibble,
188 .byte_read_data = parport_ieee1284_read_byte,
190 .owner = THIS_MODULE,
193 /* ----------- Initialisation code --------------------------------- */
195 static int __init amiga_parallel_probe(struct platform_device *pdev)
197 struct parport *p;
198 int err;
200 ciaa.ddrb = 0xff;
201 ciab.ddra &= 0xf8;
202 mb();
204 p = parport_register_port((unsigned long)&ciaa.prb, IRQ_AMIGA_CIAA_FLG,
205 PARPORT_DMA_NONE, &pp_amiga_ops);
206 if (!p)
207 return -EBUSY;
209 err = request_irq(IRQ_AMIGA_CIAA_FLG, parport_irq_handler, 0, p->name,
211 if (err)
212 goto out_irq;
214 printk(KERN_INFO "%s: Amiga built-in port using irq\n", p->name);
215 /* XXX: set operating mode */
216 parport_announce_port(p);
218 platform_set_drvdata(pdev, p);
220 return 0;
222 out_irq:
223 parport_put_port(p);
224 return err;
227 static int __exit amiga_parallel_remove(struct platform_device *pdev)
229 struct parport *port = platform_get_drvdata(pdev);
231 parport_remove_port(port);
232 if (port->irq != PARPORT_IRQ_NONE)
233 free_irq(IRQ_AMIGA_CIAA_FLG, port);
234 parport_put_port(port);
235 return 0;
238 static struct platform_driver amiga_parallel_driver = {
239 .remove = __exit_p(amiga_parallel_remove),
240 .driver = {
241 .name = "amiga-parallel",
245 module_platform_driver_probe(amiga_parallel_driver, amiga_parallel_probe);
247 MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
248 MODULE_DESCRIPTION("Parport Driver for Amiga builtin Port");
249 MODULE_SUPPORTED_DEVICE("Amiga builtin Parallel Port");
250 MODULE_LICENSE("GPL");
251 MODULE_ALIAS("platform:amiga-parallel");