?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 4.1.16
[linux/fpc-iii.git] / drivers / phy / phy-ti-pipe3.c
blob53f295c1bab1a72108d84b955714b8aef4d7e951
1 /*
2 * phy-ti-pipe3 - PIPE3 PHY driver.
3 *
4 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * Author: Kishon Vijay Abraham I <kishon@ti.com>
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 */
18
19 #include <linux/module.h>
20 #include <linux/platform_device.h>
21 #include <linux/slab.h>
22 #include <linux/phy/phy.h>
23 #include <linux/of.h>
24 #include <linux/clk.h>
25 #include <linux/err.h>
26 #include <linux/io.h>
27 #include <linux/pm_runtime.h>
28 #include <linux/delay.h>
29 #include <linux/phy/omap_control_phy.h>
30 #include <linux/of_platform.h>
31 #include <linux/spinlock.h>
32
33 #define PLL_STATUS 0x00000004
34 #define PLL_GO 0x00000008
35 #define PLL_CONFIGURATION1 0x0000000C
36 #define PLL_CONFIGURATION2 0x00000010
37 #define PLL_CONFIGURATION3 0x00000014
38 #define PLL_CONFIGURATION4 0x00000020
39
40 #define PLL_REGM_MASK 0x001FFE00
41 #define PLL_REGM_SHIFT 0x9
42 #define PLL_REGM_F_MASK 0x0003FFFF
43 #define PLL_REGM_F_SHIFT 0x0
44 #define PLL_REGN_MASK 0x000001FE
45 #define PLL_REGN_SHIFT 0x1
46 #define PLL_SELFREQDCO_MASK 0x0000000E
47 #define PLL_SELFREQDCO_SHIFT 0x1
48 #define PLL_SD_MASK 0x0003FC00
49 #define PLL_SD_SHIFT 10
50 #define SET_PLL_GO 0x1
51 #define PLL_LDOPWDN BIT(15)
52 #define PLL_TICOPWDN BIT(16)
53 #define PLL_LOCK 0x2
54 #define PLL_IDLE 0x1
55
56 /*
57 * This is an Empirical value that works, need to confirm the actual
58 * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
59 * to be correctly reflected in the PIPE3PHY_PLL_STATUS register.
60 */
61 #define PLL_IDLE_TIME 100 /* in milliseconds */
62 #define PLL_LOCK_TIME 100 /* in milliseconds */
63
64 struct pipe3_dpll_params {
65 u16 m;
66 u8 n;
67 u8 freq:3;
68 u8 sd;
69 u32 mf;
70 };
71
72 struct pipe3_dpll_map {
73 unsigned long rate;
74 struct pipe3_dpll_params params;
75 };
76
77 struct ti_pipe3 {
78 void __iomem *pll_ctrl_base;
79 struct device *dev;
80 struct device *control_dev;
81 struct clk *wkupclk;
82 struct clk *sys_clk;
83 struct clk *refclk;
84 struct clk *div_clk;
85 struct pipe3_dpll_map *dpll_map;
86 bool enabled;
87 spinlock_t lock; /* serialize clock enable/disable */
88 /* the below flag is needed specifically for SATA */
89 bool refclk_enabled;
90 };
91
92 static struct pipe3_dpll_map dpll_map_usb[] = {
93 {12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */
94 {16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */
95 {19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */
96 {20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */
97 {26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */
98 {38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */
99 { }, /* Terminator */
100 };
101
102 static struct pipe3_dpll_map dpll_map_sata[] = {
103 {12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */
104 {16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */
105 {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */
106 {20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */
107 {26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */
108 {38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */
109 { }, /* Terminator */
110 };
111
112 static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset)
113 {
114 return __raw_readl(addr + offset);
115 }
116
117 static inline void ti_pipe3_writel(void __iomem *addr, unsigned offset,
118 u32 data)
119 {
120 __raw_writel(data, addr + offset);
121 }
122
123 static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy)
124 {
125 unsigned long rate;
126 struct pipe3_dpll_map *dpll_map = phy->dpll_map;
127
128 rate = clk_get_rate(phy->sys_clk);
129
130 for (; dpll_map->rate; dpll_map++) {
131 if (rate == dpll_map->rate)
132 return &dpll_map->params;
133 }
134
135 dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate);
136
137 return NULL;
138 }
139
140 static int ti_pipe3_power_off(struct phy *x)
141 {
142 struct ti_pipe3 *phy = phy_get_drvdata(x);
143
144 omap_control_phy_power(phy->control_dev, 0);
145
146 return 0;
147 }
148
149 static int ti_pipe3_power_on(struct phy *x)
150 {
151 struct ti_pipe3 *phy = phy_get_drvdata(x);
152
153 omap_control_phy_power(phy->control_dev, 1);
154
155 return 0;
156 }
157
158 static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy)
159 {
160 u32 val;
161 unsigned long timeout;
162
163 timeout = jiffies + msecs_to_jiffies(PLL_LOCK_TIME);
164 do {
165 cpu_relax();
166 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
167 if (val & PLL_LOCK)
168 return 0;
169 } while (!time_after(jiffies, timeout));
170
171 dev_err(phy->dev, "DPLL failed to lock\n");
172 return -EBUSY;
173 }
174
175 static int ti_pipe3_dpll_program(struct ti_pipe3 *phy)
176 {
177 u32 val;
178 struct pipe3_dpll_params *dpll_params;
179
180 dpll_params = ti_pipe3_get_dpll_params(phy);
181 if (!dpll_params)
182 return -EINVAL;
183
184 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
185 val &= ~PLL_REGN_MASK;
186 val |= dpll_params->n << PLL_REGN_SHIFT;
187 ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
188
189 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
190 val &= ~PLL_SELFREQDCO_MASK;
191 val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
192 ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
193
194 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
195 val &= ~PLL_REGM_MASK;
196 val |= dpll_params->m << PLL_REGM_SHIFT;
197 ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
198
199 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
200 val &= ~PLL_REGM_F_MASK;
201 val |= dpll_params->mf << PLL_REGM_F_SHIFT;
202 ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
203
204 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
205 val &= ~PLL_SD_MASK;
206 val |= dpll_params->sd << PLL_SD_SHIFT;
207 ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
208
209 ti_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
210
211 return ti_pipe3_dpll_wait_lock(phy);
212 }
213
214 static int ti_pipe3_init(struct phy *x)
215 {
216 struct ti_pipe3 *phy = phy_get_drvdata(x);
217 u32 val;
218 int ret = 0;
219
220 /*
221 * Set pcie_pcs register to 0x96 for proper functioning of phy
222 * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
223 * 18-1804.
224 */
225 if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
226 omap_control_pcie_pcs(phy->control_dev, 0x96);
227 return 0;
228 }
229
230 /* Bring it out of IDLE if it is IDLE */
231 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
232 if (val & PLL_IDLE) {
233 val &= ~PLL_IDLE;
234 ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
235 ret = ti_pipe3_dpll_wait_lock(phy);
236 }
237
238 /* Program the DPLL only if not locked */
239 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
240 if (!(val & PLL_LOCK))
241 if (ti_pipe3_dpll_program(phy))
242 return -EINVAL;
243
244 return ret;
245 }
246
247 static int ti_pipe3_exit(struct phy *x)
248 {
249 struct ti_pipe3 *phy = phy_get_drvdata(x);
250 u32 val;
251 unsigned long timeout;
252
253 /* SATA DPLL can't be powered down due to Errata i783 and PCIe
254 * does not have internal DPLL
255 */
256 if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") ||
257 of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie"))
258 return 0;
259
260 /* Put DPLL in IDLE mode */
261 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
262 val |= PLL_IDLE;
263 ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
264
265 /* wait for LDO and Oscillator to power down */
266 timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME);
267 do {
268 cpu_relax();
269 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
270 if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
271 break;
272 } while (!time_after(jiffies, timeout));
273
274 if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
275 dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n",
276 val);
277 return -EBUSY;
278 }
279
280 return 0;
281 }
282 static struct phy_ops ops = {
283 .init = ti_pipe3_init,
284 .exit = ti_pipe3_exit,
285 .power_on = ti_pipe3_power_on,
286 .power_off = ti_pipe3_power_off,
287 .owner = THIS_MODULE,
288 };
289
290 static const struct of_device_id ti_pipe3_id_table[];
291
292 static int ti_pipe3_probe(struct platform_device *pdev)
293 {
294 struct ti_pipe3 *phy;
295 struct phy *generic_phy;
296 struct phy_provider *phy_provider;
297 struct resource *res;
298 struct device_node *node = pdev->dev.of_node;
299 struct device_node *control_node;
300 struct platform_device *control_pdev;
301 const struct of_device_id *match;
302 struct clk *clk;
303
304 phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
305 if (!phy)
306 return -ENOMEM;
307
308 phy->dev = &pdev->dev;
309 spin_lock_init(&phy->lock);
310
311 if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
312 match = of_match_device(ti_pipe3_id_table, &pdev->dev);
313 if (!match)
314 return -EINVAL;
315
316 phy->dpll_map = (struct pipe3_dpll_map *)match->data;
317 if (!phy->dpll_map) {
318 dev_err(&pdev->dev, "no DPLL data\n");
319 return -EINVAL;
320 }
321
322 res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
323 "pll_ctrl");
324 phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
325 if (IS_ERR(phy->pll_ctrl_base))
326 return PTR_ERR(phy->pll_ctrl_base);
327
328 phy->sys_clk = devm_clk_get(phy->dev, "sysclk");
329 if (IS_ERR(phy->sys_clk)) {
330 dev_err(&pdev->dev, "unable to get sysclk\n");
331 return -EINVAL;
332 }
333 }
334
335 phy->refclk = devm_clk_get(phy->dev, "refclk");
336 if (IS_ERR(phy->refclk)) {
337 dev_err(&pdev->dev, "unable to get refclk\n");
338 /* older DTBs have missing refclk in SATA PHY
339 * so don't bail out in case of SATA PHY.
340 */
341 if (!of_device_is_compatible(node, "ti,phy-pipe3-sata"))
342 return PTR_ERR(phy->refclk);
343 }
344
345 if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
346 phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
347 if (IS_ERR(phy->wkupclk)) {
348 dev_err(&pdev->dev, "unable to get wkupclk\n");
349 return PTR_ERR(phy->wkupclk);
350 }
351 } else {
352 phy->wkupclk = ERR_PTR(-ENODEV);
353 }
354
355 if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
356
357 clk = devm_clk_get(phy->dev, "dpll_ref");
358 if (IS_ERR(clk)) {
359 dev_err(&pdev->dev, "unable to get dpll ref clk\n");
360 return PTR_ERR(clk);
361 }
362 clk_set_rate(clk, 1500000000);
363
364 clk = devm_clk_get(phy->dev, "dpll_ref_m2");
365 if (IS_ERR(clk)) {
366 dev_err(&pdev->dev, "unable to get dpll ref m2 clk\n");
367 return PTR_ERR(clk);
368 }
369 clk_set_rate(clk, 100000000);
370
371 clk = devm_clk_get(phy->dev, "phy-div");
372 if (IS_ERR(clk)) {
373 dev_err(&pdev->dev, "unable to get phy-div clk\n");
374 return PTR_ERR(clk);
375 }
376 clk_set_rate(clk, 100000000);
377
378 phy->div_clk = devm_clk_get(phy->dev, "div-clk");
379 if (IS_ERR(phy->div_clk)) {
380 dev_err(&pdev->dev, "unable to get div-clk\n");
381 return PTR_ERR(phy->div_clk);
382 }
383 } else {
384 phy->div_clk = ERR_PTR(-ENODEV);
385 }
386
387 control_node = of_parse_phandle(node, "ctrl-module", 0);
388 if (!control_node) {
389 dev_err(&pdev->dev, "Failed to get control device phandle\n");
390 return -EINVAL;
391 }
392
393 control_pdev = of_find_device_by_node(control_node);
394 if (!control_pdev) {
395 dev_err(&pdev->dev, "Failed to get control device\n");
396 return -EINVAL;
397 }
398
399 phy->control_dev = &control_pdev->dev;
400
401 omap_control_phy_power(phy->control_dev, 0);
402
403 platform_set_drvdata(pdev, phy);
404 pm_runtime_enable(phy->dev);
405
406 generic_phy = devm_phy_create(phy->dev, NULL, &ops);
407 if (IS_ERR(generic_phy))
408 return PTR_ERR(generic_phy);
409
410 phy_set_drvdata(generic_phy, phy);
411 phy_provider = devm_of_phy_provider_register(phy->dev,
412 of_phy_simple_xlate);
413 if (IS_ERR(phy_provider))
414 return PTR_ERR(phy_provider);
415
416 pm_runtime_get(&pdev->dev);
417
418 return 0;
419 }
420
421 static int ti_pipe3_remove(struct platform_device *pdev)
422 {
423 if (!pm_runtime_suspended(&pdev->dev))
424 pm_runtime_put(&pdev->dev);
425 pm_runtime_disable(&pdev->dev);
426
427 return 0;
428 }
429
430 #ifdef CONFIG_PM
431 static int ti_pipe3_enable_refclk(struct ti_pipe3 *phy)
432 {
433 if (!IS_ERR(phy->refclk) && !phy->refclk_enabled) {
434 int ret;
435
436 ret = clk_prepare_enable(phy->refclk);
437 if (ret) {
438 dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
439 return ret;
440 }
441 phy->refclk_enabled = true;
442 }
443
444 return 0;
445 }
446
447 static void ti_pipe3_disable_refclk(struct ti_pipe3 *phy)
448 {
449 if (!IS_ERR(phy->refclk))
450 clk_disable_unprepare(phy->refclk);
451
452 phy->refclk_enabled = false;
453 }
454
455 static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
456 {
457 int ret = 0;
458 unsigned long flags;
459
460 spin_lock_irqsave(&phy->lock, flags);
461 if (phy->enabled)
462 goto err1;
463
464 ret = ti_pipe3_enable_refclk(phy);
465 if (ret)
466 goto err1;
467
468 if (!IS_ERR(phy->wkupclk)) {
469 ret = clk_prepare_enable(phy->wkupclk);
470 if (ret) {
471 dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
472 goto err2;
473 }
474 }
475
476 if (!IS_ERR(phy->div_clk)) {
477 ret = clk_prepare_enable(phy->div_clk);
478 if (ret) {
479 dev_err(phy->dev, "Failed to enable div_clk %d\n", ret);
480 goto err3;
481 }
482 }
483
484 phy->enabled = true;
485 spin_unlock_irqrestore(&phy->lock, flags);
486 return 0;
487
488 err3:
489 if (!IS_ERR(phy->wkupclk))
490 clk_disable_unprepare(phy->wkupclk);
491
492 err2:
493 if (!IS_ERR(phy->refclk))
494 clk_disable_unprepare(phy->refclk);
495
496 ti_pipe3_disable_refclk(phy);
497 err1:
498 spin_unlock_irqrestore(&phy->lock, flags);
499 return ret;
500 }
501
502 static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
503 {
504 unsigned long flags;
505
506 spin_lock_irqsave(&phy->lock, flags);
507 if (!phy->enabled) {
508 spin_unlock_irqrestore(&phy->lock, flags);
509 return;
510 }
511
512 if (!IS_ERR(phy->wkupclk))
513 clk_disable_unprepare(phy->wkupclk);
514 /* Don't disable refclk for SATA PHY due to Errata i783 */
515 if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata"))
516 ti_pipe3_disable_refclk(phy);
517 if (!IS_ERR(phy->div_clk))
518 clk_disable_unprepare(phy->div_clk);
519 phy->enabled = false;
520 spin_unlock_irqrestore(&phy->lock, flags);
521 }
522
523 static int ti_pipe3_runtime_suspend(struct device *dev)
524 {
525 struct ti_pipe3 *phy = dev_get_drvdata(dev);
526
527 ti_pipe3_disable_clocks(phy);
528 return 0;
529 }
530
531 static int ti_pipe3_runtime_resume(struct device *dev)
532 {
533 struct ti_pipe3 *phy = dev_get_drvdata(dev);
534 int ret = 0;
535
536 ret = ti_pipe3_enable_clocks(phy);
537 return ret;
538 }
539
540 static int ti_pipe3_suspend(struct device *dev)
541 {
542 struct ti_pipe3 *phy = dev_get_drvdata(dev);
543
544 ti_pipe3_disable_clocks(phy);
545 return 0;
546 }
547
548 static int ti_pipe3_resume(struct device *dev)
549 {
550 struct ti_pipe3 *phy = dev_get_drvdata(dev);
551 int ret;
552
553 ret = ti_pipe3_enable_clocks(phy);
554 if (ret)
555 return ret;
556
557 pm_runtime_disable(dev);
558 pm_runtime_set_active(dev);
559 pm_runtime_enable(dev);
560 return 0;
561 }
562 #endif
563
564 static const struct dev_pm_ops ti_pipe3_pm_ops = {
565 SET_RUNTIME_PM_OPS(ti_pipe3_runtime_suspend,
566 ti_pipe3_runtime_resume, NULL)
567 SET_SYSTEM_SLEEP_PM_OPS(ti_pipe3_suspend, ti_pipe3_resume)
568 };
569
570 static const struct of_device_id ti_pipe3_id_table[] = {
571 {
572 .compatible = "ti,phy-usb3",
573 .data = dpll_map_usb,
574 },
575 {
576 .compatible = "ti,omap-usb3",
577 .data = dpll_map_usb,
578 },
579 {
580 .compatible = "ti,phy-pipe3-sata",
581 .data = dpll_map_sata,
582 },
583 {
584 .compatible = "ti,phy-pipe3-pcie",
585 },
586 {}
587 };
588 MODULE_DEVICE_TABLE(of, ti_pipe3_id_table);
589
590 static struct platform_driver ti_pipe3_driver = {
591 .probe = ti_pipe3_probe,
592 .remove = ti_pipe3_remove,
593 .driver = {
594 .name = "ti-pipe3",
595 .pm = &ti_pipe3_pm_ops,
596 .of_match_table = ti_pipe3_id_table,
597 },
598 };
599
600 module_platform_driver(ti_pipe3_driver);
601
602 MODULE_ALIAS("platform:ti_pipe3");
603 MODULE_AUTHOR("Texas Instruments Inc.");
604 MODULE_DESCRIPTION("TI PIPE3 phy driver");
605 MODULE_LICENSE("GPL v2");
Linux with added FPC-III support