2 * exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit)
4 * Copyright (C) 2014 Samsung Electronics
5 * Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
6 * Lukasz Majewski <l.majewski@samsung.com>
8 * Copyright (C) 2011 Samsung Electronics
9 * Donggeun Kim <dg77.kim@samsung.com>
10 * Amit Daniel Kachhap <amit.kachhap@linaro.org>
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
28 #include <linux/clk.h>
30 #include <linux/interrupt.h>
31 #include <linux/module.h>
33 #include <linux/of_address.h>
34 #include <linux/of_irq.h>
35 #include <linux/platform_device.h>
36 #include <linux/regulator/consumer.h>
38 #include "exynos_tmu.h"
39 #include "../thermal_core.h"
41 /* Exynos generic registers */
42 #define EXYNOS_TMU_REG_TRIMINFO 0x0
43 #define EXYNOS_TMU_REG_CONTROL 0x20
44 #define EXYNOS_TMU_REG_STATUS 0x28
45 #define EXYNOS_TMU_REG_CURRENT_TEMP 0x40
46 #define EXYNOS_TMU_REG_INTEN 0x70
47 #define EXYNOS_TMU_REG_INTSTAT 0x74
48 #define EXYNOS_TMU_REG_INTCLEAR 0x78
50 #define EXYNOS_TMU_TEMP_MASK 0xff
51 #define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24
52 #define EXYNOS_TMU_REF_VOLTAGE_MASK 0x1f
53 #define EXYNOS_TMU_BUF_SLOPE_SEL_MASK 0xf
54 #define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8
55 #define EXYNOS_TMU_CORE_EN_SHIFT 0
57 /* Exynos3250 specific registers */
58 #define EXYNOS_TMU_TRIMINFO_CON1 0x10
60 /* Exynos4210 specific registers */
61 #define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44
62 #define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50
64 /* Exynos5250, Exynos4412, Exynos3250 specific registers */
65 #define EXYNOS_TMU_TRIMINFO_CON2 0x14
66 #define EXYNOS_THD_TEMP_RISE 0x50
67 #define EXYNOS_THD_TEMP_FALL 0x54
68 #define EXYNOS_EMUL_CON 0x80
70 #define EXYNOS_TRIMINFO_RELOAD_ENABLE 1
71 #define EXYNOS_TRIMINFO_25_SHIFT 0
72 #define EXYNOS_TRIMINFO_85_SHIFT 8
73 #define EXYNOS_TMU_TRIP_MODE_SHIFT 13
74 #define EXYNOS_TMU_TRIP_MODE_MASK 0x7
75 #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
77 #define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
78 #define EXYNOS_TMU_INTEN_RISE1_SHIFT 4
79 #define EXYNOS_TMU_INTEN_RISE2_SHIFT 8
80 #define EXYNOS_TMU_INTEN_RISE3_SHIFT 12
81 #define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
83 #define EXYNOS_EMUL_TIME 0x57F0
84 #define EXYNOS_EMUL_TIME_MASK 0xffff
85 #define EXYNOS_EMUL_TIME_SHIFT 16
86 #define EXYNOS_EMUL_DATA_SHIFT 8
87 #define EXYNOS_EMUL_DATA_MASK 0xFF
88 #define EXYNOS_EMUL_ENABLE 0x1
90 /* Exynos5260 specific */
91 #define EXYNOS5260_TMU_REG_INTEN 0xC0
92 #define EXYNOS5260_TMU_REG_INTSTAT 0xC4
93 #define EXYNOS5260_TMU_REG_INTCLEAR 0xC8
94 #define EXYNOS5260_EMUL_CON 0x100
96 /* Exynos4412 specific */
97 #define EXYNOS4412_MUX_ADDR_VALUE 6
98 #define EXYNOS4412_MUX_ADDR_SHIFT 20
100 /*exynos5440 specific registers*/
101 #define EXYNOS5440_TMU_S0_7_TRIM 0x000
102 #define EXYNOS5440_TMU_S0_7_CTRL 0x020
103 #define EXYNOS5440_TMU_S0_7_DEBUG 0x040
104 #define EXYNOS5440_TMU_S0_7_TEMP 0x0f0
105 #define EXYNOS5440_TMU_S0_7_TH0 0x110
106 #define EXYNOS5440_TMU_S0_7_TH1 0x130
107 #define EXYNOS5440_TMU_S0_7_TH2 0x150
108 #define EXYNOS5440_TMU_S0_7_IRQEN 0x210
109 #define EXYNOS5440_TMU_S0_7_IRQ 0x230
110 /* exynos5440 common registers */
111 #define EXYNOS5440_TMU_IRQ_STATUS 0x000
112 #define EXYNOS5440_TMU_PMIN 0x004
114 #define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0
115 #define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1
116 #define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2
117 #define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3
118 #define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4
119 #define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
120 #define EXYNOS5440_EFUSE_SWAP_OFFSET 8
122 /* Exynos7 specific registers */
123 #define EXYNOS7_THD_TEMP_RISE7_6 0x50
124 #define EXYNOS7_THD_TEMP_FALL7_6 0x60
125 #define EXYNOS7_TMU_REG_INTEN 0x110
126 #define EXYNOS7_TMU_REG_INTPEND 0x118
127 #define EXYNOS7_TMU_REG_EMUL_CON 0x160
129 #define EXYNOS7_TMU_TEMP_MASK 0x1ff
130 #define EXYNOS7_PD_DET_EN_SHIFT 23
131 #define EXYNOS7_TMU_INTEN_RISE0_SHIFT 0
132 #define EXYNOS7_TMU_INTEN_RISE1_SHIFT 1
133 #define EXYNOS7_TMU_INTEN_RISE2_SHIFT 2
134 #define EXYNOS7_TMU_INTEN_RISE3_SHIFT 3
135 #define EXYNOS7_TMU_INTEN_RISE4_SHIFT 4
136 #define EXYNOS7_TMU_INTEN_RISE5_SHIFT 5
137 #define EXYNOS7_TMU_INTEN_RISE6_SHIFT 6
138 #define EXYNOS7_TMU_INTEN_RISE7_SHIFT 7
139 #define EXYNOS7_EMUL_DATA_SHIFT 7
140 #define EXYNOS7_EMUL_DATA_MASK 0x1ff
142 #define MCELSIUS 1000
144 * struct exynos_tmu_data : A structure to hold the private data of the TMU
146 * @id: identifier of the one instance of the TMU controller.
147 * @pdata: pointer to the tmu platform/configuration data
148 * @base: base address of the single instance of the TMU controller.
149 * @base_second: base address of the common registers of the TMU controller.
150 * @irq: irq number of the TMU controller.
151 * @soc: id of the SOC type.
152 * @irq_work: pointer to the irq work structure.
153 * @lock: lock to implement synchronization.
154 * @clk: pointer to the clock structure.
155 * @clk_sec: pointer to the clock structure for accessing the base_second.
156 * @sclk: pointer to the clock structure for accessing the tmu special clk.
157 * @temp_error1: fused value of the first point trim.
158 * @temp_error2: fused value of the second point trim.
159 * @regulator: pointer to the TMU regulator structure.
160 * @reg_conf: pointer to structure to register with core thermal.
161 * @tmu_initialize: SoC specific TMU initialization method
162 * @tmu_control: SoC specific TMU control method
163 * @tmu_read: SoC specific TMU temperature read method
164 * @tmu_set_emulation: SoC specific TMU emulation setting method
165 * @tmu_clear_irqs: SoC specific TMU interrupts clearing method
167 struct exynos_tmu_data
{
169 struct exynos_tmu_platform_data
*pdata
;
171 void __iomem
*base_second
;
174 struct work_struct irq_work
;
176 struct clk
*clk
, *clk_sec
, *sclk
;
177 u16 temp_error1
, temp_error2
;
178 struct regulator
*regulator
;
179 struct thermal_zone_device
*tzd
;
181 int (*tmu_initialize
)(struct platform_device
*pdev
);
182 void (*tmu_control
)(struct platform_device
*pdev
, bool on
);
183 int (*tmu_read
)(struct exynos_tmu_data
*data
);
184 void (*tmu_set_emulation
)(struct exynos_tmu_data
*data
,
186 void (*tmu_clear_irqs
)(struct exynos_tmu_data
*data
);
189 static void exynos_report_trigger(struct exynos_tmu_data
*p
)
191 char data
[10], *envp
[] = { data
, NULL
};
192 struct thermal_zone_device
*tz
= p
->tzd
;
197 pr_err("No thermal zone device defined\n");
201 thermal_zone_device_update(tz
);
203 mutex_lock(&tz
->lock
);
204 /* Find the level for which trip happened */
205 for (i
= 0; i
< of_thermal_get_ntrips(tz
); i
++) {
206 tz
->ops
->get_trip_temp(tz
, i
, &temp
);
207 if (tz
->last_temperature
< temp
)
211 snprintf(data
, sizeof(data
), "%u", i
);
212 kobject_uevent_env(&tz
->device
.kobj
, KOBJ_CHANGE
, envp
);
213 mutex_unlock(&tz
->lock
);
217 * TMU treats temperature as a mapped temperature code.
218 * The temperature is converted differently depending on the calibration type.
220 static int temp_to_code(struct exynos_tmu_data
*data
, u8 temp
)
222 struct exynos_tmu_platform_data
*pdata
= data
->pdata
;
225 switch (pdata
->cal_type
) {
226 case TYPE_TWO_POINT_TRIMMING
:
227 temp_code
= (temp
- pdata
->first_point_trim
) *
228 (data
->temp_error2
- data
->temp_error1
) /
229 (pdata
->second_point_trim
- pdata
->first_point_trim
) +
232 case TYPE_ONE_POINT_TRIMMING
:
233 temp_code
= temp
+ data
->temp_error1
- pdata
->first_point_trim
;
236 temp_code
= temp
+ pdata
->default_temp_offset
;
244 * Calculate a temperature value from a temperature code.
245 * The unit of the temperature is degree Celsius.
247 static int code_to_temp(struct exynos_tmu_data
*data
, u16 temp_code
)
249 struct exynos_tmu_platform_data
*pdata
= data
->pdata
;
252 switch (pdata
->cal_type
) {
253 case TYPE_TWO_POINT_TRIMMING
:
254 temp
= (temp_code
- data
->temp_error1
) *
255 (pdata
->second_point_trim
- pdata
->first_point_trim
) /
256 (data
->temp_error2
- data
->temp_error1
) +
257 pdata
->first_point_trim
;
259 case TYPE_ONE_POINT_TRIMMING
:
260 temp
= temp_code
- data
->temp_error1
+ pdata
->first_point_trim
;
263 temp
= temp_code
- pdata
->default_temp_offset
;
270 static void sanitize_temp_error(struct exynos_tmu_data
*data
, u32 trim_info
)
272 struct exynos_tmu_platform_data
*pdata
= data
->pdata
;
274 data
->temp_error1
= trim_info
& EXYNOS_TMU_TEMP_MASK
;
275 data
->temp_error2
= ((trim_info
>> EXYNOS_TRIMINFO_85_SHIFT
) &
276 EXYNOS_TMU_TEMP_MASK
);
278 if (!data
->temp_error1
||
279 (pdata
->min_efuse_value
> data
->temp_error1
) ||
280 (data
->temp_error1
> pdata
->max_efuse_value
))
281 data
->temp_error1
= pdata
->efuse_value
& EXYNOS_TMU_TEMP_MASK
;
283 if (!data
->temp_error2
)
285 (pdata
->efuse_value
>> EXYNOS_TRIMINFO_85_SHIFT
) &
286 EXYNOS_TMU_TEMP_MASK
;
289 static u32
get_th_reg(struct exynos_tmu_data
*data
, u32 threshold
, bool falling
)
291 struct thermal_zone_device
*tz
= data
->tzd
;
292 const struct thermal_trip
* const trips
=
293 of_thermal_get_trip_points(tz
);
298 pr_err("%s: Cannot get trip points from of-thermal.c!\n",
303 for (i
= 0; i
< of_thermal_get_ntrips(tz
); i
++) {
304 if (trips
[i
].type
== THERMAL_TRIP_CRITICAL
)
307 temp
= trips
[i
].temperature
/ MCELSIUS
;
309 temp
-= (trips
[i
].hysteresis
/ MCELSIUS
);
311 threshold
&= ~(0xff << 8 * i
);
313 threshold
|= temp_to_code(data
, temp
) << 8 * i
;
319 static int exynos_tmu_initialize(struct platform_device
*pdev
)
321 struct exynos_tmu_data
*data
= platform_get_drvdata(pdev
);
324 mutex_lock(&data
->lock
);
325 clk_enable(data
->clk
);
326 if (!IS_ERR(data
->clk_sec
))
327 clk_enable(data
->clk_sec
);
328 ret
= data
->tmu_initialize(pdev
);
329 clk_disable(data
->clk
);
330 mutex_unlock(&data
->lock
);
331 if (!IS_ERR(data
->clk_sec
))
332 clk_disable(data
->clk_sec
);
337 static u32
get_con_reg(struct exynos_tmu_data
*data
, u32 con
)
339 struct exynos_tmu_platform_data
*pdata
= data
->pdata
;
341 if (data
->soc
== SOC_ARCH_EXYNOS4412
||
342 data
->soc
== SOC_ARCH_EXYNOS3250
)
343 con
|= (EXYNOS4412_MUX_ADDR_VALUE
<< EXYNOS4412_MUX_ADDR_SHIFT
);
345 con
&= ~(EXYNOS_TMU_REF_VOLTAGE_MASK
<< EXYNOS_TMU_REF_VOLTAGE_SHIFT
);
346 con
|= pdata
->reference_voltage
<< EXYNOS_TMU_REF_VOLTAGE_SHIFT
;
348 con
&= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK
<< EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT
);
349 con
|= (pdata
->gain
<< EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT
);
351 if (pdata
->noise_cancel_mode
) {
352 con
&= ~(EXYNOS_TMU_TRIP_MODE_MASK
<< EXYNOS_TMU_TRIP_MODE_SHIFT
);
353 con
|= (pdata
->noise_cancel_mode
<< EXYNOS_TMU_TRIP_MODE_SHIFT
);
359 static void exynos_tmu_control(struct platform_device
*pdev
, bool on
)
361 struct exynos_tmu_data
*data
= platform_get_drvdata(pdev
);
363 mutex_lock(&data
->lock
);
364 clk_enable(data
->clk
);
365 data
->tmu_control(pdev
, on
);
366 clk_disable(data
->clk
);
367 mutex_unlock(&data
->lock
);
370 static int exynos4210_tmu_initialize(struct platform_device
*pdev
)
372 struct exynos_tmu_data
*data
= platform_get_drvdata(pdev
);
373 struct thermal_zone_device
*tz
= data
->tzd
;
374 const struct thermal_trip
* const trips
=
375 of_thermal_get_trip_points(tz
);
376 int ret
= 0, threshold_code
, i
;
377 unsigned long reference
, temp
;
381 pr_err("%s: Cannot get trip points from of-thermal.c!\n",
387 status
= readb(data
->base
+ EXYNOS_TMU_REG_STATUS
);
393 sanitize_temp_error(data
, readl(data
->base
+ EXYNOS_TMU_REG_TRIMINFO
));
395 /* Write temperature code for threshold */
396 reference
= trips
[0].temperature
/ MCELSIUS
;
397 threshold_code
= temp_to_code(data
, reference
);
398 if (threshold_code
< 0) {
399 ret
= threshold_code
;
402 writeb(threshold_code
, data
->base
+ EXYNOS4210_TMU_REG_THRESHOLD_TEMP
);
404 for (i
= 0; i
< of_thermal_get_ntrips(tz
); i
++) {
405 temp
= trips
[i
].temperature
/ MCELSIUS
;
406 writeb(temp
- reference
, data
->base
+
407 EXYNOS4210_TMU_REG_TRIG_LEVEL0
+ i
* 4);
410 data
->tmu_clear_irqs(data
);
415 static int exynos4412_tmu_initialize(struct platform_device
*pdev
)
417 struct exynos_tmu_data
*data
= platform_get_drvdata(pdev
);
418 const struct thermal_trip
* const trips
=
419 of_thermal_get_trip_points(data
->tzd
);
420 unsigned int status
, trim_info
, con
, ctrl
, rising_threshold
;
421 int ret
= 0, threshold_code
, i
;
422 unsigned long crit_temp
= 0;
424 status
= readb(data
->base
+ EXYNOS_TMU_REG_STATUS
);
430 if (data
->soc
== SOC_ARCH_EXYNOS3250
||
431 data
->soc
== SOC_ARCH_EXYNOS4412
||
432 data
->soc
== SOC_ARCH_EXYNOS5250
) {
433 if (data
->soc
== SOC_ARCH_EXYNOS3250
) {
434 ctrl
= readl(data
->base
+ EXYNOS_TMU_TRIMINFO_CON1
);
435 ctrl
|= EXYNOS_TRIMINFO_RELOAD_ENABLE
;
436 writel(ctrl
, data
->base
+ EXYNOS_TMU_TRIMINFO_CON1
);
438 ctrl
= readl(data
->base
+ EXYNOS_TMU_TRIMINFO_CON2
);
439 ctrl
|= EXYNOS_TRIMINFO_RELOAD_ENABLE
;
440 writel(ctrl
, data
->base
+ EXYNOS_TMU_TRIMINFO_CON2
);
443 /* On exynos5420 the triminfo register is in the shared space */
444 if (data
->soc
== SOC_ARCH_EXYNOS5420_TRIMINFO
)
445 trim_info
= readl(data
->base_second
+ EXYNOS_TMU_REG_TRIMINFO
);
447 trim_info
= readl(data
->base
+ EXYNOS_TMU_REG_TRIMINFO
);
449 sanitize_temp_error(data
, trim_info
);
451 /* Write temperature code for rising and falling threshold */
452 rising_threshold
= readl(data
->base
+ EXYNOS_THD_TEMP_RISE
);
453 rising_threshold
= get_th_reg(data
, rising_threshold
, false);
454 writel(rising_threshold
, data
->base
+ EXYNOS_THD_TEMP_RISE
);
455 writel(get_th_reg(data
, 0, true), data
->base
+ EXYNOS_THD_TEMP_FALL
);
457 data
->tmu_clear_irqs(data
);
459 /* if last threshold limit is also present */
460 for (i
= 0; i
< of_thermal_get_ntrips(data
->tzd
); i
++) {
461 if (trips
[i
].type
== THERMAL_TRIP_CRITICAL
) {
462 crit_temp
= trips
[i
].temperature
;
467 if (i
== of_thermal_get_ntrips(data
->tzd
)) {
468 pr_err("%s: No CRITICAL trip point defined at of-thermal.c!\n",
474 threshold_code
= temp_to_code(data
, crit_temp
/ MCELSIUS
);
475 /* 1-4 level to be assigned in th0 reg */
476 rising_threshold
&= ~(0xff << 8 * i
);
477 rising_threshold
|= threshold_code
<< 8 * i
;
478 writel(rising_threshold
, data
->base
+ EXYNOS_THD_TEMP_RISE
);
479 con
= readl(data
->base
+ EXYNOS_TMU_REG_CONTROL
);
480 con
|= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT
);
481 writel(con
, data
->base
+ EXYNOS_TMU_REG_CONTROL
);
487 static int exynos5440_tmu_initialize(struct platform_device
*pdev
)
489 struct exynos_tmu_data
*data
= platform_get_drvdata(pdev
);
490 unsigned int trim_info
= 0, con
, rising_threshold
;
491 int ret
= 0, threshold_code
;
492 unsigned long crit_temp
= 0;
495 * For exynos5440 soc triminfo value is swapped between TMU0 and
496 * TMU2, so the below logic is needed.
500 trim_info
= readl(data
->base
+ EXYNOS5440_EFUSE_SWAP_OFFSET
+
501 EXYNOS5440_TMU_S0_7_TRIM
);
504 trim_info
= readl(data
->base
+ EXYNOS5440_TMU_S0_7_TRIM
);
507 trim_info
= readl(data
->base
- EXYNOS5440_EFUSE_SWAP_OFFSET
+
508 EXYNOS5440_TMU_S0_7_TRIM
);
510 sanitize_temp_error(data
, trim_info
);
512 /* Write temperature code for rising and falling threshold */
513 rising_threshold
= readl(data
->base
+ EXYNOS5440_TMU_S0_7_TH0
);
514 rising_threshold
= get_th_reg(data
, rising_threshold
, false);
515 writel(rising_threshold
, data
->base
+ EXYNOS5440_TMU_S0_7_TH0
);
516 writel(0, data
->base
+ EXYNOS5440_TMU_S0_7_TH1
);
518 data
->tmu_clear_irqs(data
);
520 /* if last threshold limit is also present */
521 if (!data
->tzd
->ops
->get_crit_temp(data
->tzd
, &crit_temp
)) {
522 threshold_code
= temp_to_code(data
, crit_temp
/ MCELSIUS
);
523 /* 5th level to be assigned in th2 reg */
525 threshold_code
<< EXYNOS5440_TMU_TH_RISE4_SHIFT
;
526 writel(rising_threshold
, data
->base
+ EXYNOS5440_TMU_S0_7_TH2
);
527 con
= readl(data
->base
+ EXYNOS5440_TMU_S0_7_CTRL
);
528 con
|= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT
);
529 writel(con
, data
->base
+ EXYNOS5440_TMU_S0_7_CTRL
);
531 /* Clear the PMIN in the common TMU register */
533 writel(0, data
->base_second
+ EXYNOS5440_TMU_PMIN
);
537 static int exynos7_tmu_initialize(struct platform_device
*pdev
)
539 struct exynos_tmu_data
*data
= platform_get_drvdata(pdev
);
540 struct thermal_zone_device
*tz
= data
->tzd
;
541 struct exynos_tmu_platform_data
*pdata
= data
->pdata
;
542 unsigned int status
, trim_info
;
543 unsigned int rising_threshold
= 0, falling_threshold
= 0;
544 int ret
= 0, threshold_code
, i
;
545 unsigned long temp
, temp_hist
;
546 unsigned int reg_off
, bit_off
;
548 status
= readb(data
->base
+ EXYNOS_TMU_REG_STATUS
);
554 trim_info
= readl(data
->base
+ EXYNOS_TMU_REG_TRIMINFO
);
556 data
->temp_error1
= trim_info
& EXYNOS7_TMU_TEMP_MASK
;
557 if (!data
->temp_error1
||
558 (pdata
->min_efuse_value
> data
->temp_error1
) ||
559 (data
->temp_error1
> pdata
->max_efuse_value
))
560 data
->temp_error1
= pdata
->efuse_value
& EXYNOS_TMU_TEMP_MASK
;
562 /* Write temperature code for rising and falling threshold */
563 for (i
= (of_thermal_get_ntrips(tz
) - 1); i
>= 0; i
--) {
565 * On exynos7 there are 4 rising and 4 falling threshold
566 * registers (0x50-0x5c and 0x60-0x6c respectively). Each
567 * register holds the value of two threshold levels (at bit
568 * offsets 0 and 16). Based on the fact that there are atmost
569 * eight possible trigger levels, calculate the register and
570 * bit offsets where the threshold levels are to be written.
572 * e.g. EXYNOS7_THD_TEMP_RISE7_6 (0x50)
573 * [24:16] - Threshold level 7
574 * [8:0] - Threshold level 6
575 * e.g. EXYNOS7_THD_TEMP_RISE5_4 (0x54)
576 * [24:16] - Threshold level 5
577 * [8:0] - Threshold level 4
579 * and similarly for falling thresholds.
581 * Based on the above, calculate the register and bit offsets
582 * for rising/falling threshold levels and populate them.
584 reg_off
= ((7 - i
) / 2) * 4;
585 bit_off
= ((8 - i
) % 2);
587 tz
->ops
->get_trip_temp(tz
, i
, &temp
);
590 tz
->ops
->get_trip_hyst(tz
, i
, &temp_hist
);
591 temp_hist
= temp
- (temp_hist
/ MCELSIUS
);
593 /* Set 9-bit temperature code for rising threshold levels */
594 threshold_code
= temp_to_code(data
, temp
);
595 rising_threshold
= readl(data
->base
+
596 EXYNOS7_THD_TEMP_RISE7_6
+ reg_off
);
597 rising_threshold
&= ~(EXYNOS7_TMU_TEMP_MASK
<< (16 * bit_off
));
598 rising_threshold
|= threshold_code
<< (16 * bit_off
);
599 writel(rising_threshold
,
600 data
->base
+ EXYNOS7_THD_TEMP_RISE7_6
+ reg_off
);
602 /* Set 9-bit temperature code for falling threshold levels */
603 threshold_code
= temp_to_code(data
, temp_hist
);
604 falling_threshold
&= ~(EXYNOS7_TMU_TEMP_MASK
<< (16 * bit_off
));
605 falling_threshold
|= threshold_code
<< (16 * bit_off
);
606 writel(falling_threshold
,
607 data
->base
+ EXYNOS7_THD_TEMP_FALL7_6
+ reg_off
);
610 data
->tmu_clear_irqs(data
);
615 static void exynos4210_tmu_control(struct platform_device
*pdev
, bool on
)
617 struct exynos_tmu_data
*data
= platform_get_drvdata(pdev
);
618 struct thermal_zone_device
*tz
= data
->tzd
;
619 unsigned int con
, interrupt_en
;
621 con
= get_con_reg(data
, readl(data
->base
+ EXYNOS_TMU_REG_CONTROL
));
624 con
|= (1 << EXYNOS_TMU_CORE_EN_SHIFT
);
626 (of_thermal_is_trip_valid(tz
, 3)
627 << EXYNOS_TMU_INTEN_RISE3_SHIFT
) |
628 (of_thermal_is_trip_valid(tz
, 2)
629 << EXYNOS_TMU_INTEN_RISE2_SHIFT
) |
630 (of_thermal_is_trip_valid(tz
, 1)
631 << EXYNOS_TMU_INTEN_RISE1_SHIFT
) |
632 (of_thermal_is_trip_valid(tz
, 0)
633 << EXYNOS_TMU_INTEN_RISE0_SHIFT
);
635 if (data
->soc
!= SOC_ARCH_EXYNOS4210
)
637 interrupt_en
<< EXYNOS_TMU_INTEN_FALL0_SHIFT
;
639 con
&= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT
);
640 interrupt_en
= 0; /* Disable all interrupts */
642 writel(interrupt_en
, data
->base
+ EXYNOS_TMU_REG_INTEN
);
643 writel(con
, data
->base
+ EXYNOS_TMU_REG_CONTROL
);
646 static void exynos5440_tmu_control(struct platform_device
*pdev
, bool on
)
648 struct exynos_tmu_data
*data
= platform_get_drvdata(pdev
);
649 struct thermal_zone_device
*tz
= data
->tzd
;
650 unsigned int con
, interrupt_en
;
652 con
= get_con_reg(data
, readl(data
->base
+ EXYNOS5440_TMU_S0_7_CTRL
));
655 con
|= (1 << EXYNOS_TMU_CORE_EN_SHIFT
);
657 (of_thermal_is_trip_valid(tz
, 3)
658 << EXYNOS5440_TMU_INTEN_RISE3_SHIFT
) |
659 (of_thermal_is_trip_valid(tz
, 2)
660 << EXYNOS5440_TMU_INTEN_RISE2_SHIFT
) |
661 (of_thermal_is_trip_valid(tz
, 1)
662 << EXYNOS5440_TMU_INTEN_RISE1_SHIFT
) |
663 (of_thermal_is_trip_valid(tz
, 0)
664 << EXYNOS5440_TMU_INTEN_RISE0_SHIFT
);
666 interrupt_en
<< EXYNOS5440_TMU_INTEN_FALL0_SHIFT
;
668 con
&= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT
);
669 interrupt_en
= 0; /* Disable all interrupts */
671 writel(interrupt_en
, data
->base
+ EXYNOS5440_TMU_S0_7_IRQEN
);
672 writel(con
, data
->base
+ EXYNOS5440_TMU_S0_7_CTRL
);
675 static void exynos7_tmu_control(struct platform_device
*pdev
, bool on
)
677 struct exynos_tmu_data
*data
= platform_get_drvdata(pdev
);
678 struct thermal_zone_device
*tz
= data
->tzd
;
679 unsigned int con
, interrupt_en
;
681 con
= get_con_reg(data
, readl(data
->base
+ EXYNOS_TMU_REG_CONTROL
));
684 con
|= (1 << EXYNOS_TMU_CORE_EN_SHIFT
);
685 con
|= (1 << EXYNOS7_PD_DET_EN_SHIFT
);
687 (of_thermal_is_trip_valid(tz
, 7)
688 << EXYNOS7_TMU_INTEN_RISE7_SHIFT
) |
689 (of_thermal_is_trip_valid(tz
, 6)
690 << EXYNOS7_TMU_INTEN_RISE6_SHIFT
) |
691 (of_thermal_is_trip_valid(tz
, 5)
692 << EXYNOS7_TMU_INTEN_RISE5_SHIFT
) |
693 (of_thermal_is_trip_valid(tz
, 4)
694 << EXYNOS7_TMU_INTEN_RISE4_SHIFT
) |
695 (of_thermal_is_trip_valid(tz
, 3)
696 << EXYNOS7_TMU_INTEN_RISE3_SHIFT
) |
697 (of_thermal_is_trip_valid(tz
, 2)
698 << EXYNOS7_TMU_INTEN_RISE2_SHIFT
) |
699 (of_thermal_is_trip_valid(tz
, 1)
700 << EXYNOS7_TMU_INTEN_RISE1_SHIFT
) |
701 (of_thermal_is_trip_valid(tz
, 0)
702 << EXYNOS7_TMU_INTEN_RISE0_SHIFT
);
705 interrupt_en
<< EXYNOS_TMU_INTEN_FALL0_SHIFT
;
707 con
&= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT
);
708 con
&= ~(1 << EXYNOS7_PD_DET_EN_SHIFT
);
709 interrupt_en
= 0; /* Disable all interrupts */
712 writel(interrupt_en
, data
->base
+ EXYNOS7_TMU_REG_INTEN
);
713 writel(con
, data
->base
+ EXYNOS_TMU_REG_CONTROL
);
716 static int exynos_get_temp(void *p
, long *temp
)
718 struct exynos_tmu_data
*data
= p
;
720 if (!data
|| !data
->tmu_read
)
723 mutex_lock(&data
->lock
);
724 clk_enable(data
->clk
);
726 *temp
= code_to_temp(data
, data
->tmu_read(data
)) * MCELSIUS
;
728 clk_disable(data
->clk
);
729 mutex_unlock(&data
->lock
);
734 #ifdef CONFIG_THERMAL_EMULATION
735 static u32
get_emul_con_reg(struct exynos_tmu_data
*data
, unsigned int val
,
741 if (data
->soc
!= SOC_ARCH_EXYNOS5440
) {
742 val
&= ~(EXYNOS_EMUL_TIME_MASK
<< EXYNOS_EMUL_TIME_SHIFT
);
743 val
|= (EXYNOS_EMUL_TIME
<< EXYNOS_EMUL_TIME_SHIFT
);
745 if (data
->soc
== SOC_ARCH_EXYNOS7
) {
746 val
&= ~(EXYNOS7_EMUL_DATA_MASK
<<
747 EXYNOS7_EMUL_DATA_SHIFT
);
748 val
|= (temp_to_code(data
, temp
) <<
749 EXYNOS7_EMUL_DATA_SHIFT
) |
752 val
&= ~(EXYNOS_EMUL_DATA_MASK
<<
753 EXYNOS_EMUL_DATA_SHIFT
);
754 val
|= (temp_to_code(data
, temp
) <<
755 EXYNOS_EMUL_DATA_SHIFT
) |
759 val
&= ~EXYNOS_EMUL_ENABLE
;
765 static void exynos4412_tmu_set_emulation(struct exynos_tmu_data
*data
,
771 if (data
->soc
== SOC_ARCH_EXYNOS5260
)
772 emul_con
= EXYNOS5260_EMUL_CON
;
773 else if (data
->soc
== SOC_ARCH_EXYNOS7
)
774 emul_con
= EXYNOS7_TMU_REG_EMUL_CON
;
776 emul_con
= EXYNOS_EMUL_CON
;
778 val
= readl(data
->base
+ emul_con
);
779 val
= get_emul_con_reg(data
, val
, temp
);
780 writel(val
, data
->base
+ emul_con
);
783 static void exynos5440_tmu_set_emulation(struct exynos_tmu_data
*data
,
788 val
= readl(data
->base
+ EXYNOS5440_TMU_S0_7_DEBUG
);
789 val
= get_emul_con_reg(data
, val
, temp
);
790 writel(val
, data
->base
+ EXYNOS5440_TMU_S0_7_DEBUG
);
793 static int exynos_tmu_set_emulation(void *drv_data
, unsigned long temp
)
795 struct exynos_tmu_data
*data
= drv_data
;
798 if (data
->soc
== SOC_ARCH_EXYNOS4210
)
801 if (temp
&& temp
< MCELSIUS
)
804 mutex_lock(&data
->lock
);
805 clk_enable(data
->clk
);
806 data
->tmu_set_emulation(data
, temp
);
807 clk_disable(data
->clk
);
808 mutex_unlock(&data
->lock
);
814 #define exynos4412_tmu_set_emulation NULL
815 #define exynos5440_tmu_set_emulation NULL
816 static int exynos_tmu_set_emulation(void *drv_data
, unsigned long temp
)
818 #endif /* CONFIG_THERMAL_EMULATION */
820 static int exynos4210_tmu_read(struct exynos_tmu_data
*data
)
822 int ret
= readb(data
->base
+ EXYNOS_TMU_REG_CURRENT_TEMP
);
824 /* "temp_code" should range between 75 and 175 */
825 return (ret
< 75 || ret
> 175) ? -ENODATA
: ret
;
828 static int exynos4412_tmu_read(struct exynos_tmu_data
*data
)
830 return readb(data
->base
+ EXYNOS_TMU_REG_CURRENT_TEMP
);
833 static int exynos5440_tmu_read(struct exynos_tmu_data
*data
)
835 return readb(data
->base
+ EXYNOS5440_TMU_S0_7_TEMP
);
838 static int exynos7_tmu_read(struct exynos_tmu_data
*data
)
840 return readw(data
->base
+ EXYNOS_TMU_REG_CURRENT_TEMP
) &
841 EXYNOS7_TMU_TEMP_MASK
;
844 static void exynos_tmu_work(struct work_struct
*work
)
846 struct exynos_tmu_data
*data
= container_of(work
,
847 struct exynos_tmu_data
, irq_work
);
848 unsigned int val_type
;
850 if (!IS_ERR(data
->clk_sec
))
851 clk_enable(data
->clk_sec
);
852 /* Find which sensor generated this interrupt */
853 if (data
->soc
== SOC_ARCH_EXYNOS5440
) {
854 val_type
= readl(data
->base_second
+ EXYNOS5440_TMU_IRQ_STATUS
);
855 if (!((val_type
>> data
->id
) & 0x1))
858 if (!IS_ERR(data
->clk_sec
))
859 clk_disable(data
->clk_sec
);
861 exynos_report_trigger(data
);
862 mutex_lock(&data
->lock
);
863 clk_enable(data
->clk
);
865 /* TODO: take action based on particular interrupt */
866 data
->tmu_clear_irqs(data
);
868 clk_disable(data
->clk
);
869 mutex_unlock(&data
->lock
);
871 enable_irq(data
->irq
);
874 static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data
*data
)
876 unsigned int val_irq
;
877 u32 tmu_intstat
, tmu_intclear
;
879 if (data
->soc
== SOC_ARCH_EXYNOS5260
) {
880 tmu_intstat
= EXYNOS5260_TMU_REG_INTSTAT
;
881 tmu_intclear
= EXYNOS5260_TMU_REG_INTCLEAR
;
882 } else if (data
->soc
== SOC_ARCH_EXYNOS7
) {
883 tmu_intstat
= EXYNOS7_TMU_REG_INTPEND
;
884 tmu_intclear
= EXYNOS7_TMU_REG_INTPEND
;
886 tmu_intstat
= EXYNOS_TMU_REG_INTSTAT
;
887 tmu_intclear
= EXYNOS_TMU_REG_INTCLEAR
;
890 val_irq
= readl(data
->base
+ tmu_intstat
);
892 * Clear the interrupts. Please note that the documentation for
893 * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly
894 * states that INTCLEAR register has a different placing of bits
895 * responsible for FALL IRQs than INTSTAT register. Exynos5420
896 * and Exynos5440 documentation is correct (Exynos4210 doesn't
897 * support FALL IRQs at all).
899 writel(val_irq
, data
->base
+ tmu_intclear
);
902 static void exynos5440_tmu_clear_irqs(struct exynos_tmu_data
*data
)
904 unsigned int val_irq
;
906 val_irq
= readl(data
->base
+ EXYNOS5440_TMU_S0_7_IRQ
);
907 /* clear the interrupts */
908 writel(val_irq
, data
->base
+ EXYNOS5440_TMU_S0_7_IRQ
);
911 static irqreturn_t
exynos_tmu_irq(int irq
, void *id
)
913 struct exynos_tmu_data
*data
= id
;
915 disable_irq_nosync(irq
);
916 schedule_work(&data
->irq_work
);
921 static const struct of_device_id exynos_tmu_match
[] = {
922 { .compatible
= "samsung,exynos3250-tmu", },
923 { .compatible
= "samsung,exynos4210-tmu", },
924 { .compatible
= "samsung,exynos4412-tmu", },
925 { .compatible
= "samsung,exynos5250-tmu", },
926 { .compatible
= "samsung,exynos5260-tmu", },
927 { .compatible
= "samsung,exynos5420-tmu", },
928 { .compatible
= "samsung,exynos5420-tmu-ext-triminfo", },
929 { .compatible
= "samsung,exynos5440-tmu", },
930 { .compatible
= "samsung,exynos7-tmu", },
933 MODULE_DEVICE_TABLE(of
, exynos_tmu_match
);
935 static int exynos_of_get_soc_type(struct device_node
*np
)
937 if (of_device_is_compatible(np
, "samsung,exynos3250-tmu"))
938 return SOC_ARCH_EXYNOS3250
;
939 else if (of_device_is_compatible(np
, "samsung,exynos4210-tmu"))
940 return SOC_ARCH_EXYNOS4210
;
941 else if (of_device_is_compatible(np
, "samsung,exynos4412-tmu"))
942 return SOC_ARCH_EXYNOS4412
;
943 else if (of_device_is_compatible(np
, "samsung,exynos5250-tmu"))
944 return SOC_ARCH_EXYNOS5250
;
945 else if (of_device_is_compatible(np
, "samsung,exynos5260-tmu"))
946 return SOC_ARCH_EXYNOS5260
;
947 else if (of_device_is_compatible(np
, "samsung,exynos5420-tmu"))
948 return SOC_ARCH_EXYNOS5420
;
949 else if (of_device_is_compatible(np
,
950 "samsung,exynos5420-tmu-ext-triminfo"))
951 return SOC_ARCH_EXYNOS5420_TRIMINFO
;
952 else if (of_device_is_compatible(np
, "samsung,exynos5440-tmu"))
953 return SOC_ARCH_EXYNOS5440
;
954 else if (of_device_is_compatible(np
, "samsung,exynos7-tmu"))
955 return SOC_ARCH_EXYNOS7
;
960 static int exynos_of_sensor_conf(struct device_node
*np
,
961 struct exynos_tmu_platform_data
*pdata
)
968 ret
= of_property_read_u32(np
, "samsung,tmu_gain", &value
);
969 pdata
->gain
= (u8
)value
;
970 of_property_read_u32(np
, "samsung,tmu_reference_voltage", &value
);
971 pdata
->reference_voltage
= (u8
)value
;
972 of_property_read_u32(np
, "samsung,tmu_noise_cancel_mode", &value
);
973 pdata
->noise_cancel_mode
= (u8
)value
;
975 of_property_read_u32(np
, "samsung,tmu_efuse_value",
976 &pdata
->efuse_value
);
977 of_property_read_u32(np
, "samsung,tmu_min_efuse_value",
978 &pdata
->min_efuse_value
);
979 of_property_read_u32(np
, "samsung,tmu_max_efuse_value",
980 &pdata
->max_efuse_value
);
982 of_property_read_u32(np
, "samsung,tmu_first_point_trim", &value
);
983 pdata
->first_point_trim
= (u8
)value
;
984 of_property_read_u32(np
, "samsung,tmu_second_point_trim", &value
);
985 pdata
->second_point_trim
= (u8
)value
;
986 of_property_read_u32(np
, "samsung,tmu_default_temp_offset", &value
);
987 pdata
->default_temp_offset
= (u8
)value
;
989 of_property_read_u32(np
, "samsung,tmu_cal_type", &pdata
->cal_type
);
990 of_property_read_u32(np
, "samsung,tmu_cal_mode", &pdata
->cal_mode
);
996 static int exynos_map_dt_data(struct platform_device
*pdev
)
998 struct exynos_tmu_data
*data
= platform_get_drvdata(pdev
);
999 struct exynos_tmu_platform_data
*pdata
;
1000 struct resource res
;
1003 if (!data
|| !pdev
->dev
.of_node
)
1007 * Try enabling the regulator if found
1008 * TODO: Add regulator as an SOC feature, so that regulator enable
1009 * is a compulsory call.
1011 data
->regulator
= devm_regulator_get(&pdev
->dev
, "vtmu");
1012 if (!IS_ERR(data
->regulator
)) {
1013 ret
= regulator_enable(data
->regulator
);
1015 dev_err(&pdev
->dev
, "failed to enable vtmu\n");
1019 dev_info(&pdev
->dev
, "Regulator node (vtmu) not found\n");
1022 data
->id
= of_alias_get_id(pdev
->dev
.of_node
, "tmuctrl");
1026 data
->irq
= irq_of_parse_and_map(pdev
->dev
.of_node
, 0);
1027 if (data
->irq
<= 0) {
1028 dev_err(&pdev
->dev
, "failed to get IRQ\n");
1032 if (of_address_to_resource(pdev
->dev
.of_node
, 0, &res
)) {
1033 dev_err(&pdev
->dev
, "failed to get Resource 0\n");
1037 data
->base
= devm_ioremap(&pdev
->dev
, res
.start
, resource_size(&res
));
1039 dev_err(&pdev
->dev
, "Failed to ioremap memory\n");
1040 return -EADDRNOTAVAIL
;
1043 pdata
= devm_kzalloc(&pdev
->dev
,
1044 sizeof(struct exynos_tmu_platform_data
),
1049 exynos_of_sensor_conf(pdev
->dev
.of_node
, pdata
);
1050 data
->pdata
= pdata
;
1051 data
->soc
= exynos_of_get_soc_type(pdev
->dev
.of_node
);
1053 switch (data
->soc
) {
1054 case SOC_ARCH_EXYNOS4210
:
1055 data
->tmu_initialize
= exynos4210_tmu_initialize
;
1056 data
->tmu_control
= exynos4210_tmu_control
;
1057 data
->tmu_read
= exynos4210_tmu_read
;
1058 data
->tmu_clear_irqs
= exynos4210_tmu_clear_irqs
;
1060 case SOC_ARCH_EXYNOS3250
:
1061 case SOC_ARCH_EXYNOS4412
:
1062 case SOC_ARCH_EXYNOS5250
:
1063 case SOC_ARCH_EXYNOS5260
:
1064 case SOC_ARCH_EXYNOS5420
:
1065 case SOC_ARCH_EXYNOS5420_TRIMINFO
:
1066 data
->tmu_initialize
= exynos4412_tmu_initialize
;
1067 data
->tmu_control
= exynos4210_tmu_control
;
1068 data
->tmu_read
= exynos4412_tmu_read
;
1069 data
->tmu_set_emulation
= exynos4412_tmu_set_emulation
;
1070 data
->tmu_clear_irqs
= exynos4210_tmu_clear_irqs
;
1072 case SOC_ARCH_EXYNOS5440
:
1073 data
->tmu_initialize
= exynos5440_tmu_initialize
;
1074 data
->tmu_control
= exynos5440_tmu_control
;
1075 data
->tmu_read
= exynos5440_tmu_read
;
1076 data
->tmu_set_emulation
= exynos5440_tmu_set_emulation
;
1077 data
->tmu_clear_irqs
= exynos5440_tmu_clear_irqs
;
1079 case SOC_ARCH_EXYNOS7
:
1080 data
->tmu_initialize
= exynos7_tmu_initialize
;
1081 data
->tmu_control
= exynos7_tmu_control
;
1082 data
->tmu_read
= exynos7_tmu_read
;
1083 data
->tmu_set_emulation
= exynos4412_tmu_set_emulation
;
1084 data
->tmu_clear_irqs
= exynos4210_tmu_clear_irqs
;
1087 dev_err(&pdev
->dev
, "Platform not supported\n");
1092 * Check if the TMU shares some registers and then try to map the
1093 * memory of common registers.
1095 if (data
->soc
!= SOC_ARCH_EXYNOS5420_TRIMINFO
&&
1096 data
->soc
!= SOC_ARCH_EXYNOS5440
)
1099 if (of_address_to_resource(pdev
->dev
.of_node
, 1, &res
)) {
1100 dev_err(&pdev
->dev
, "failed to get Resource 1\n");
1104 data
->base_second
= devm_ioremap(&pdev
->dev
, res
.start
,
1105 resource_size(&res
));
1106 if (!data
->base_second
) {
1107 dev_err(&pdev
->dev
, "Failed to ioremap memory\n");
1114 static struct thermal_zone_of_device_ops exynos_sensor_ops
= {
1115 .get_temp
= exynos_get_temp
,
1116 .set_emul_temp
= exynos_tmu_set_emulation
,
1119 static int exynos_tmu_probe(struct platform_device
*pdev
)
1121 struct exynos_tmu_platform_data
*pdata
;
1122 struct exynos_tmu_data
*data
;
1125 data
= devm_kzalloc(&pdev
->dev
, sizeof(struct exynos_tmu_data
),
1130 platform_set_drvdata(pdev
, data
);
1131 mutex_init(&data
->lock
);
1133 data
->tzd
= thermal_zone_of_sensor_register(&pdev
->dev
, 0, data
,
1134 &exynos_sensor_ops
);
1135 if (IS_ERR(data
->tzd
)) {
1136 pr_err("thermal: tz: %p ERROR\n", data
->tzd
);
1137 return PTR_ERR(data
->tzd
);
1139 ret
= exynos_map_dt_data(pdev
);
1143 pdata
= data
->pdata
;
1145 INIT_WORK(&data
->irq_work
, exynos_tmu_work
);
1147 data
->clk
= devm_clk_get(&pdev
->dev
, "tmu_apbif");
1148 if (IS_ERR(data
->clk
)) {
1149 dev_err(&pdev
->dev
, "Failed to get clock\n");
1150 ret
= PTR_ERR(data
->clk
);
1154 data
->clk_sec
= devm_clk_get(&pdev
->dev
, "tmu_triminfo_apbif");
1155 if (IS_ERR(data
->clk_sec
)) {
1156 if (data
->soc
== SOC_ARCH_EXYNOS5420_TRIMINFO
) {
1157 dev_err(&pdev
->dev
, "Failed to get triminfo clock\n");
1158 ret
= PTR_ERR(data
->clk_sec
);
1162 ret
= clk_prepare(data
->clk_sec
);
1164 dev_err(&pdev
->dev
, "Failed to get clock\n");
1169 ret
= clk_prepare(data
->clk
);
1171 dev_err(&pdev
->dev
, "Failed to get clock\n");
1175 if (data
->soc
== SOC_ARCH_EXYNOS7
) {
1176 data
->sclk
= devm_clk_get(&pdev
->dev
, "tmu_sclk");
1177 if (IS_ERR(data
->sclk
)) {
1178 dev_err(&pdev
->dev
, "Failed to get sclk\n");
1181 ret
= clk_prepare_enable(data
->sclk
);
1183 dev_err(&pdev
->dev
, "Failed to enable sclk\n");
1189 ret
= exynos_tmu_initialize(pdev
);
1191 dev_err(&pdev
->dev
, "Failed to initialize TMU\n");
1195 ret
= devm_request_irq(&pdev
->dev
, data
->irq
, exynos_tmu_irq
,
1196 IRQF_TRIGGER_RISING
| IRQF_SHARED
, dev_name(&pdev
->dev
), data
);
1198 dev_err(&pdev
->dev
, "Failed to request irq: %d\n", data
->irq
);
1202 exynos_tmu_control(pdev
, true);
1205 clk_disable_unprepare(data
->sclk
);
1207 clk_unprepare(data
->clk
);
1209 if (!IS_ERR(data
->clk_sec
))
1210 clk_unprepare(data
->clk_sec
);
1212 if (!IS_ERR_OR_NULL(data
->regulator
))
1213 regulator_disable(data
->regulator
);
1214 thermal_zone_of_sensor_unregister(&pdev
->dev
, data
->tzd
);
1219 static int exynos_tmu_remove(struct platform_device
*pdev
)
1221 struct exynos_tmu_data
*data
= platform_get_drvdata(pdev
);
1222 struct thermal_zone_device
*tzd
= data
->tzd
;
1224 thermal_zone_of_sensor_unregister(&pdev
->dev
, tzd
);
1225 exynos_tmu_control(pdev
, false);
1227 clk_disable_unprepare(data
->sclk
);
1228 clk_unprepare(data
->clk
);
1229 if (!IS_ERR(data
->clk_sec
))
1230 clk_unprepare(data
->clk_sec
);
1232 if (!IS_ERR(data
->regulator
))
1233 regulator_disable(data
->regulator
);
1238 #ifdef CONFIG_PM_SLEEP
1239 static int exynos_tmu_suspend(struct device
*dev
)
1241 exynos_tmu_control(to_platform_device(dev
), false);
1246 static int exynos_tmu_resume(struct device
*dev
)
1248 struct platform_device
*pdev
= to_platform_device(dev
);
1250 exynos_tmu_initialize(pdev
);
1251 exynos_tmu_control(pdev
, true);
1256 static SIMPLE_DEV_PM_OPS(exynos_tmu_pm
,
1257 exynos_tmu_suspend
, exynos_tmu_resume
);
1258 #define EXYNOS_TMU_PM (&exynos_tmu_pm)
1260 #define EXYNOS_TMU_PM NULL
1263 static struct platform_driver exynos_tmu_driver
= {
1265 .name
= "exynos-tmu",
1266 .pm
= EXYNOS_TMU_PM
,
1267 .of_match_table
= exynos_tmu_match
,
1269 .probe
= exynos_tmu_probe
,
1270 .remove
= exynos_tmu_remove
,
1273 module_platform_driver(exynos_tmu_driver
);
1275 MODULE_DESCRIPTION("EXYNOS TMU Driver");
1276 MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
1277 MODULE_LICENSE("GPL");
1278 MODULE_ALIAS("platform:exynos-tmu");