drivers/iio/adc/fsl-imx25-gcq.c

   1 /*
   2  * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de>
   3  *
   4  * This program is free software; you can redistribute it and/or modify it under
   5  * the terms of the GNU General Public License version 2 as published by the
   6  * Free Software Foundation.
   7  *
   8  * This is the driver for the imx25 GCQ (Generic Conversion Queue)
   9  * connected to the imx25 ADC.
  10  */
  11
  12 #include <dt-bindings/iio/adc/fsl-imx25-gcq.h>
  13 #include <linux/clk.h>
  14 #include <linux/iio/iio.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/mfd/imx25-tsadc.h>
  17 #include <linux/module.h>
  18 #include <linux/of.h>
  19 #include <linux/platform_device.h>
  20 #include <linux/regmap.h>
  21 #include <linux/regulator/consumer.h>
  22
  23 #define MX25_GCQ_TIMEOUT (msecs_to_jiffies(2000))
  24
  25 static const char * const driver_name = "mx25-gcq";
  26
  27 enum mx25_gcq_cfgs {
  28         MX25_CFG_XP = 0,
  29         MX25_CFG_YP,
  30         MX25_CFG_XN,
  31         MX25_CFG_YN,
  32         MX25_CFG_WIPER,
  33         MX25_CFG_INAUX0,
  34         MX25_CFG_INAUX1,
  35         MX25_CFG_INAUX2,
  36         MX25_NUM_CFGS,
  37 };
  38
  39 struct mx25_gcq_priv {
  40         struct regmap *regs;
  41         struct completion completed;
  42         struct clk *clk;
  43         int irq;
  44         struct regulator *vref[4];
  45         u32 channel_vref_mv[MX25_NUM_CFGS];
  46 };
  47
  48 #define MX25_CQG_CHAN(chan, id) {\
  49         .type = IIO_VOLTAGE,\
  50         .indexed = 1,\
  51         .channel = chan,\
  52         .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
  53                               BIT(IIO_CHAN_INFO_SCALE),\
  54         .datasheet_name = id,\
  55 }
  56
  57 static const struct iio_chan_spec mx25_gcq_channels[MX25_NUM_CFGS] = {
  58         MX25_CQG_CHAN(MX25_CFG_XP, "xp"),
  59         MX25_CQG_CHAN(MX25_CFG_YP, "yp"),
  60         MX25_CQG_CHAN(MX25_CFG_XN, "xn"),
  61         MX25_CQG_CHAN(MX25_CFG_YN, "yn"),
  62         MX25_CQG_CHAN(MX25_CFG_WIPER, "wiper"),
  63         MX25_CQG_CHAN(MX25_CFG_INAUX0, "inaux0"),
  64         MX25_CQG_CHAN(MX25_CFG_INAUX1, "inaux1"),
  65         MX25_CQG_CHAN(MX25_CFG_INAUX2, "inaux2"),
  66 };
  67
  68 static const char * const mx25_gcq_refp_names[] = {
  69         [MX25_ADC_REFP_YP] = "yp",
  70         [MX25_ADC_REFP_XP] = "xp",
  71         [MX25_ADC_REFP_INT] = "int",
  72         [MX25_ADC_REFP_EXT] = "ext",
  73 };
  74
  75 static irqreturn_t mx25_gcq_irq(int irq, void *data)
  76 {
  77         struct mx25_gcq_priv *priv = data;
  78         u32 stats;
  79
  80         regmap_read(priv->regs, MX25_ADCQ_SR, &stats);
  81
  82         if (stats & MX25_ADCQ_SR_EOQ) {
  83                 regmap_update_bits(priv->regs, MX25_ADCQ_MR,
  84                                    MX25_ADCQ_MR_EOQ_IRQ, MX25_ADCQ_MR_EOQ_IRQ);
  85                 complete(&priv->completed);
  86         }
  87
  88         /* Disable conversion queue run */
  89         regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS, 0);
  90
  91         /* Acknowledge all possible irqs */
  92         regmap_write(priv->regs, MX25_ADCQ_SR, MX25_ADCQ_SR_FRR |
  93                      MX25_ADCQ_SR_FUR | MX25_ADCQ_SR_FOR |
  94                      MX25_ADCQ_SR_EOQ | MX25_ADCQ_SR_PD);
  95
  96         return IRQ_HANDLED;
  97 }
  98
  99 static int mx25_gcq_get_raw_value(struct device *dev,
 100                                   struct iio_chan_spec const *chan,
 101                                   struct mx25_gcq_priv *priv,
 102                                   int *val)
 103 {
 104         long timeout;
 105         u32 data;
 106
 107         /* Setup the configuration we want to use */
 108         regmap_write(priv->regs, MX25_ADCQ_ITEM_7_0,
 109                      MX25_ADCQ_ITEM(0, chan->channel));
 110
 111         regmap_update_bits(priv->regs, MX25_ADCQ_MR, MX25_ADCQ_MR_EOQ_IRQ, 0);
 112
 113         /* Trigger queue for one run */
 114         regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS,
 115                            MX25_ADCQ_CR_FQS);
 116
 117         timeout = wait_for_completion_interruptible_timeout(
 118                 &priv->completed, MX25_GCQ_TIMEOUT);
 119         if (timeout < 0) {
 120                 dev_err(dev, "ADC wait for measurement failed\n");
 121                 return timeout;
 122         } else if (timeout == 0) {
 123                 dev_err(dev, "ADC timed out\n");
 124                 return -ETIMEDOUT;
 125         }
 126
 127         regmap_read(priv->regs, MX25_ADCQ_FIFO, &data);
 128
 129         *val = MX25_ADCQ_FIFO_DATA(data);
 130
 131         return IIO_VAL_INT;
 132 }
 133
 134 static int mx25_gcq_read_raw(struct iio_dev *indio_dev,
 135                              struct iio_chan_spec const *chan, int *val,
 136                              int *val2, long mask)
 137 {
 138         struct mx25_gcq_priv *priv = iio_priv(indio_dev);
 139         int ret;
 140
 141         switch (mask) {
 142         case IIO_CHAN_INFO_RAW:
 143                 mutex_lock(&indio_dev->mlock);
 144                 ret = mx25_gcq_get_raw_value(&indio_dev->dev, chan, priv, val);
 145                 mutex_unlock(&indio_dev->mlock);
 146                 return ret;
 147
 148         case IIO_CHAN_INFO_SCALE:
 149                 *val = priv->channel_vref_mv[chan->channel];
 150                 *val2 = 12;
 151                 return IIO_VAL_FRACTIONAL_LOG2;
 152
 153         default:
 154                 return -EINVAL;
 155         }
 156 }
 157
 158 static const struct iio_info mx25_gcq_iio_info = {
 159         .read_raw = mx25_gcq_read_raw,
 160 };
 161
 162 static const struct regmap_config mx25_gcq_regconfig = {
 163         .max_register = 0x5c,
 164         .reg_bits = 32,
 165         .val_bits = 32,
 166         .reg_stride = 4,
 167 };
 168
 169 static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
 170                                struct mx25_gcq_priv *priv)
 171 {
 172         struct device_node *np = pdev->dev.of_node;
 173         struct device_node *child;
 174         struct device *dev = &pdev->dev;
 175         unsigned int refp_used[4] = {};
 176         int ret, i;
 177
 178         /*
 179          * Setup all configurations registers with a default conversion
 180          * configuration for each input
 181          */
 182         for (i = 0; i < MX25_NUM_CFGS; ++i)
 183                 regmap_write(priv->regs, MX25_ADCQ_CFG(i),
 184                              MX25_ADCQ_CFG_YPLL_OFF |
 185                              MX25_ADCQ_CFG_XNUR_OFF |
 186                              MX25_ADCQ_CFG_XPUL_OFF |
 187                              MX25_ADCQ_CFG_REFP_INT |
 188                              MX25_ADCQ_CFG_IN(i) |
 189                              MX25_ADCQ_CFG_REFN_NGND2);
 190
 191         /*
 192          * First get all regulators to store them in channel_vref_mv if
 193          * necessary. Later we use that information for proper IIO scale
 194          * information.
 195          */
 196         priv->vref[MX25_ADC_REFP_INT] = NULL;
 197         priv->vref[MX25_ADC_REFP_EXT] =
 198                 devm_regulator_get_optional(&pdev->dev, "vref-ext");
 199         priv->vref[MX25_ADC_REFP_XP] =
 200                 devm_regulator_get_optional(&pdev->dev, "vref-xp");
 201         priv->vref[MX25_ADC_REFP_YP] =
 202                 devm_regulator_get_optional(&pdev->dev, "vref-yp");
 203
 204         for_each_child_of_node(np, child) {
 205                 u32 reg;
 206                 u32 refp = MX25_ADCQ_CFG_REFP_INT;
 207                 u32 refn = MX25_ADCQ_CFG_REFN_NGND2;
 208
 209                 ret = of_property_read_u32(child, "reg", &reg);
 210                 if (ret) {
 211                         dev_err(dev, "Failed to get reg property\n");
 212                         return ret;
 213                 }
 214
 215                 if (reg >= MX25_NUM_CFGS) {
 216                         dev_err(dev,
 217                                 "reg value is greater than the number of available configuration registers\n");
 218                         return -EINVAL;
 219                 }
 220
 221                 of_property_read_u32(child, "fsl,adc-refp", &refp);
 222                 of_property_read_u32(child, "fsl,adc-refn", &refn);
 223
 224                 switch (refp) {
 225                 case MX25_ADC_REFP_EXT:
 226                 case MX25_ADC_REFP_XP:
 227                 case MX25_ADC_REFP_YP:
 228                         if (IS_ERR(priv->vref[refp])) {
 229                                 dev_err(dev, "Error, trying to use external voltage reference without a vref-%s regulator.",
 230                                         mx25_gcq_refp_names[refp]);
 231                                 return PTR_ERR(priv->vref[refp]);
 232                         }
 233                         priv->channel_vref_mv[reg] =
 234                                 regulator_get_voltage(priv->vref[refp]);
 235                         /* Conversion from uV to mV */
 236                         priv->channel_vref_mv[reg] /= 1000;
 237                         break;
 238                 case MX25_ADC_REFP_INT:
 239                         priv->channel_vref_mv[reg] = 2500;
 240                         break;
 241                 default:
 242                         dev_err(dev, "Invalid positive reference %d\n", refp);
 243                         return -EINVAL;
 244                 }
 245
 246                 ++refp_used[refp];
 247
 248                 /*
 249                  * Shift the read values to the correct positions within the
 250                  * register.
 251                  */
 252                 refp = MX25_ADCQ_CFG_REFP(refp);
 253                 refn = MX25_ADCQ_CFG_REFN(refn);
 254
 255                 if ((refp & MX25_ADCQ_CFG_REFP_MASK) != refp) {
 256                         dev_err(dev, "Invalid fsl,adc-refp property value\n");
 257                         return -EINVAL;
 258                 }
 259                 if ((refn & MX25_ADCQ_CFG_REFN_MASK) != refn) {
 260                         dev_err(dev, "Invalid fsl,adc-refn property value\n");
 261                         return -EINVAL;
 262                 }
 263
 264                 regmap_update_bits(priv->regs, MX25_ADCQ_CFG(reg),
 265                                    MX25_ADCQ_CFG_REFP_MASK |
 266                                    MX25_ADCQ_CFG_REFN_MASK,
 267                                    refp | refn);
 268         }
 269         regmap_update_bits(priv->regs, MX25_ADCQ_CR,
 270                            MX25_ADCQ_CR_FRST | MX25_ADCQ_CR_QRST,
 271                            MX25_ADCQ_CR_FRST | MX25_ADCQ_CR_QRST);
 272
 273         regmap_write(priv->regs, MX25_ADCQ_CR,
 274                      MX25_ADCQ_CR_PDMSK | MX25_ADCQ_CR_QSM_FQS);
 275
 276         /* Remove unused regulators */
 277         for (i = 0; i != 4; ++i) {
 278                 if (!refp_used[i]) {
 279                         if (!IS_ERR_OR_NULL(priv->vref[i]))
 280                                 devm_regulator_put(priv->vref[i]);
 281                         priv->vref[i] = NULL;
 282                 }
 283         }
 284
 285         return 0;
 286 }
 287
 288 static int mx25_gcq_probe(struct platform_device *pdev)
 289 {
 290         struct iio_dev *indio_dev;
 291         struct mx25_gcq_priv *priv;
 292         struct mx25_tsadc *tsadc = dev_get_drvdata(pdev->dev.parent);
 293         struct device *dev = &pdev->dev;
 294         struct resource *res;
 295         void __iomem *mem;
 296         int ret;
 297         int i;
 298
 299         indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
 300         if (!indio_dev)
 301                 return -ENOMEM;
 302
 303         priv = iio_priv(indio_dev);
 304
 305         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 306         mem = devm_ioremap_resource(dev, res);
 307         if (IS_ERR(mem))
 308                 return PTR_ERR(mem);
 309
 310         priv->regs = devm_regmap_init_mmio(dev, mem, &mx25_gcq_regconfig);
 311         if (IS_ERR(priv->regs)) {
 312                 dev_err(dev, "Failed to initialize regmap\n");
 313                 return PTR_ERR(priv->regs);
 314         }
 315
 316         init_completion(&priv->completed);
 317
 318         ret = mx25_gcq_setup_cfgs(pdev, priv);
 319         if (ret)
 320                 return ret;
 321
 322         for (i = 0; i != 4; ++i) {
 323                 if (!priv->vref[i])
 324                         continue;
 325
 326                 ret = regulator_enable(priv->vref[i]);
 327                 if (ret)
 328                         goto err_regulator_disable;
 329         }
 330
 331         priv->clk = tsadc->clk;
 332         ret = clk_prepare_enable(priv->clk);
 333         if (ret) {
 334                 dev_err(dev, "Failed to enable clock\n");
 335                 goto err_vref_disable;
 336         }
 337
 338         priv->irq = platform_get_irq(pdev, 0);
 339         if (priv->irq <= 0) {
 340                 dev_err(dev, "Failed to get IRQ\n");
 341                 ret = priv->irq;
 342                 if (!ret)
 343                         ret = -ENXIO;
 344                 goto err_clk_unprepare;
 345         }
 346
 347         ret = request_irq(priv->irq, mx25_gcq_irq, 0, pdev->name, priv);
 348         if (ret) {
 349                 dev_err(dev, "Failed requesting IRQ\n");
 350                 goto err_clk_unprepare;
 351         }
 352
 353         indio_dev->dev.parent = &pdev->dev;
 354         indio_dev->channels = mx25_gcq_channels;
 355         indio_dev->num_channels = ARRAY_SIZE(mx25_gcq_channels);
 356         indio_dev->info = &mx25_gcq_iio_info;
 357         indio_dev->name = driver_name;
 358
 359         ret = iio_device_register(indio_dev);
 360         if (ret) {
 361                 dev_err(dev, "Failed to register iio device\n");
 362                 goto err_irq_free;
 363         }
 364
 365         platform_set_drvdata(pdev, indio_dev);
 366
 367         return 0;
 368
 369 err_irq_free:
 370         free_irq(priv->irq, priv);
 371 err_clk_unprepare:
 372         clk_disable_unprepare(priv->clk);
 373 err_vref_disable:
 374         i = 4;
 375 err_regulator_disable:
 376         for (; i-- > 0;) {
 377                 if (priv->vref[i])
 378                         regulator_disable(priv->vref[i]);
 379         }
 380         return ret;
 381 }
 382
 383 static int mx25_gcq_remove(struct platform_device *pdev)
 384 {
 385         struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 386         struct mx25_gcq_priv *priv = iio_priv(indio_dev);
 387         int i;
 388
 389         iio_device_unregister(indio_dev);
 390         free_irq(priv->irq, priv);
 391         clk_disable_unprepare(priv->clk);
 392         for (i = 4; i-- > 0;) {
 393                 if (priv->vref[i])
 394                         regulator_disable(priv->vref[i]);
 395         }
 396
 397         return 0;
 398 }
 399
 400 static const struct of_device_id mx25_gcq_ids[] = {
 401         { .compatible = "fsl,imx25-gcq", },
 402         { /* Sentinel */ }
 403 };
 404
 405 static struct platform_driver mx25_gcq_driver = {
 406         .driver         = {
 407                 .name   = "mx25-gcq",
 408                 .of_match_table = mx25_gcq_ids,
 409         },
 410         .probe          = mx25_gcq_probe,
 411         .remove         = mx25_gcq_remove,
 412 };
 413 module_platform_driver(mx25_gcq_driver);
 414
 415 MODULE_DESCRIPTION("ADC driver for Freescale mx25");
 416 MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>");
 417 MODULE_LICENSE("GPL v2");