mmc: rtsx_pci: Enable MMC_CAP_ERASE to allow erase/discard/trim requests
[linux/fpc-iii.git] / drivers / remoteproc / da8xx_remoteproc.c
blob009e56f67de239779e3710bffc1b430257441ea3
1 /*
2 * Remote processor machine-specific module for DA8XX
4 * Copyright (C) 2013 Texas Instruments, Inc.
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * version 2 as published by the Free Software Foundation.
9 */
11 #include <linux/bitops.h>
12 #include <linux/clk.h>
13 #include <linux/err.h>
14 #include <linux/interrupt.h>
15 #include <linux/io.h>
16 #include <linux/irq.h>
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/platform_device.h>
20 #include <linux/remoteproc.h>
22 #include <mach/clock.h> /* for davinci_clk_reset_assert/deassert() */
24 #include "remoteproc_internal.h"
26 static char *da8xx_fw_name;
27 module_param(da8xx_fw_name, charp, S_IRUGO);
28 MODULE_PARM_DESC(da8xx_fw_name,
29 "Name of DSP firmware file in /lib/firmware (if not specified defaults to 'rproc-dsp-fw')");
32 * OMAP-L138 Technical References:
33 * http://www.ti.com/product/omap-l138
35 #define SYSCFG_CHIPSIG0 BIT(0)
36 #define SYSCFG_CHIPSIG1 BIT(1)
37 #define SYSCFG_CHIPSIG2 BIT(2)
38 #define SYSCFG_CHIPSIG3 BIT(3)
39 #define SYSCFG_CHIPSIG4 BIT(4)
41 /**
42 * struct da8xx_rproc - da8xx remote processor instance state
43 * @rproc: rproc handle
44 * @dsp_clk: placeholder for platform's DSP clk
45 * @ack_fxn: chip-specific ack function for ack'ing irq
46 * @irq_data: ack_fxn function parameter
47 * @chipsig: virt ptr to DSP interrupt registers (CHIPSIG & CHIPSIG_CLR)
48 * @bootreg: virt ptr to DSP boot address register (HOST1CFG)
49 * @irq: irq # used by this instance
51 struct da8xx_rproc {
52 struct rproc *rproc;
53 struct clk *dsp_clk;
54 void (*ack_fxn)(struct irq_data *data);
55 struct irq_data *irq_data;
56 void __iomem *chipsig;
57 void __iomem *bootreg;
58 int irq;
61 /**
62 * handle_event() - inbound virtqueue message workqueue function
64 * This function is registered as a kernel thread and is scheduled by the
65 * kernel handler.
67 static irqreturn_t handle_event(int irq, void *p)
69 struct rproc *rproc = (struct rproc *)p;
71 /* Process incoming buffers on all our vrings */
72 rproc_vq_interrupt(rproc, 0);
73 rproc_vq_interrupt(rproc, 1);
75 return IRQ_HANDLED;
78 /**
79 * da8xx_rproc_callback() - inbound virtqueue message handler
81 * This handler is invoked directly by the kernel whenever the remote
82 * core (DSP) has modified the state of a virtqueue. There is no
83 * "payload" message indicating the virtqueue index as is the case with
84 * mailbox-based implementations on OMAP4. As such, this handler "polls"
85 * each known virtqueue index for every invocation.
87 static irqreturn_t da8xx_rproc_callback(int irq, void *p)
89 struct rproc *rproc = (struct rproc *)p;
90 struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
91 u32 chipsig;
93 chipsig = readl(drproc->chipsig);
94 if (chipsig & SYSCFG_CHIPSIG0) {
95 /* Clear interrupt level source */
96 writel(SYSCFG_CHIPSIG0, drproc->chipsig + 4);
99 * ACK intr to AINTC.
101 * It has already been ack'ed by the kernel before calling
102 * this function, but since the ARM<->DSP interrupts in the
103 * CHIPSIG register are "level" instead of "pulse" variety,
104 * we need to ack it after taking down the level else we'll
105 * be called again immediately after returning.
107 drproc->ack_fxn(drproc->irq_data);
109 return IRQ_WAKE_THREAD;
112 return IRQ_HANDLED;
115 static int da8xx_rproc_start(struct rproc *rproc)
117 struct device *dev = rproc->dev.parent;
118 struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
119 struct clk *dsp_clk = drproc->dsp_clk;
121 /* hw requires the start (boot) address be on 1KB boundary */
122 if (rproc->bootaddr & 0x3ff) {
123 dev_err(dev, "invalid boot address: must be aligned to 1KB\n");
125 return -EINVAL;
128 writel(rproc->bootaddr, drproc->bootreg);
130 clk_enable(dsp_clk);
131 davinci_clk_reset_deassert(dsp_clk);
133 return 0;
136 static int da8xx_rproc_stop(struct rproc *rproc)
138 struct da8xx_rproc *drproc = rproc->priv;
140 clk_disable(drproc->dsp_clk);
142 return 0;
145 /* kick a virtqueue */
146 static void da8xx_rproc_kick(struct rproc *rproc, int vqid)
148 struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
150 /* Interupt remote proc */
151 writel(SYSCFG_CHIPSIG2, drproc->chipsig);
154 static struct rproc_ops da8xx_rproc_ops = {
155 .start = da8xx_rproc_start,
156 .stop = da8xx_rproc_stop,
157 .kick = da8xx_rproc_kick,
160 static int reset_assert(struct device *dev)
162 struct clk *dsp_clk;
164 dsp_clk = clk_get(dev, NULL);
165 if (IS_ERR(dsp_clk)) {
166 dev_err(dev, "clk_get error: %ld\n", PTR_ERR(dsp_clk));
167 return PTR_ERR(dsp_clk);
170 davinci_clk_reset_assert(dsp_clk);
171 clk_put(dsp_clk);
173 return 0;
176 static int da8xx_rproc_probe(struct platform_device *pdev)
178 struct device *dev = &pdev->dev;
179 struct da8xx_rproc *drproc;
180 struct rproc *rproc;
181 struct irq_data *irq_data;
182 struct resource *bootreg_res;
183 struct resource *chipsig_res;
184 struct clk *dsp_clk;
185 void __iomem *chipsig;
186 void __iomem *bootreg;
187 int irq;
188 int ret;
190 irq = platform_get_irq(pdev, 0);
191 if (irq < 0) {
192 dev_err(dev, "platform_get_irq(pdev, 0) error: %d\n", irq);
193 return irq;
196 irq_data = irq_get_irq_data(irq);
197 if (!irq_data) {
198 dev_err(dev, "irq_get_irq_data(%d): NULL\n", irq);
199 return -EINVAL;
202 bootreg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
203 bootreg = devm_ioremap_resource(dev, bootreg_res);
204 if (IS_ERR(bootreg))
205 return PTR_ERR(bootreg);
207 chipsig_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
208 chipsig = devm_ioremap_resource(dev, chipsig_res);
209 if (IS_ERR(chipsig))
210 return PTR_ERR(chipsig);
212 dsp_clk = devm_clk_get(dev, NULL);
213 if (IS_ERR(dsp_clk)) {
214 dev_err(dev, "clk_get error: %ld\n", PTR_ERR(dsp_clk));
216 return PTR_ERR(dsp_clk);
219 rproc = rproc_alloc(dev, "dsp", &da8xx_rproc_ops, da8xx_fw_name,
220 sizeof(*drproc));
221 if (!rproc)
222 return -ENOMEM;
224 drproc = rproc->priv;
225 drproc->rproc = rproc;
226 rproc->has_iommu = false;
228 platform_set_drvdata(pdev, rproc);
230 /* everything the ISR needs is now setup, so hook it up */
231 ret = devm_request_threaded_irq(dev, irq, da8xx_rproc_callback,
232 handle_event, 0, "da8xx-remoteproc",
233 rproc);
234 if (ret) {
235 dev_err(dev, "devm_request_threaded_irq error: %d\n", ret);
236 goto free_rproc;
240 * rproc_add() can end up enabling the DSP's clk with the DSP
241 * *not* in reset, but da8xx_rproc_start() needs the DSP to be
242 * held in reset at the time it is called.
244 ret = reset_assert(dev);
245 if (ret)
246 goto free_rproc;
248 drproc->chipsig = chipsig;
249 drproc->bootreg = bootreg;
250 drproc->ack_fxn = irq_data->chip->irq_ack;
251 drproc->irq_data = irq_data;
252 drproc->irq = irq;
253 drproc->dsp_clk = dsp_clk;
255 ret = rproc_add(rproc);
256 if (ret) {
257 dev_err(dev, "rproc_add failed: %d\n", ret);
258 goto free_rproc;
261 return 0;
263 free_rproc:
264 rproc_put(rproc);
266 return ret;
269 static int da8xx_rproc_remove(struct platform_device *pdev)
271 struct device *dev = &pdev->dev;
272 struct rproc *rproc = platform_get_drvdata(pdev);
273 struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
276 * It's important to place the DSP in reset before going away,
277 * since a subsequent insmod of this module may enable the DSP's
278 * clock before its program/boot-address has been loaded and
279 * before this module's probe has had a chance to reset the DSP.
280 * Without the reset, the DSP can lockup permanently when it
281 * begins executing garbage.
283 reset_assert(dev);
286 * The devm subsystem might end up releasing things before
287 * freeing the irq, thus allowing an interrupt to sneak in while
288 * the device is being removed. This should prevent that.
290 disable_irq(drproc->irq);
292 rproc_del(rproc);
293 rproc_put(rproc);
295 return 0;
298 static struct platform_driver da8xx_rproc_driver = {
299 .probe = da8xx_rproc_probe,
300 .remove = da8xx_rproc_remove,
301 .driver = {
302 .name = "davinci-rproc",
306 module_platform_driver(da8xx_rproc_driver);
308 MODULE_LICENSE("GPL v2");
309 MODULE_DESCRIPTION("DA8XX Remote Processor control driver");