mmc: rtsx_pci: Enable MMC_CAP_ERASE to allow erase/discard/trim requests
[linux/fpc-iii.git] / drivers / usb / dwc2 / pci.c
blobae419615a176a5e1da5ad13f8167c3bcddf0cdfe
1 /*
2 * pci.c - DesignWare HS OTG Controller PCI driver
4 * Copyright (C) 2004-2013 Synopsys, Inc.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions, and the following disclaimer,
11 * without modification.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. The names of the above-listed copyright holders may not be used
16 * to endorse or promote products derived from this software without
17 * specific prior written permission.
19 * ALTERNATIVELY, this software may be distributed under the terms of the
20 * GNU General Public License ("GPL") as published by the Free Software
21 * Foundation; either version 2 of the License, or (at your option) any
22 * later version.
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
25 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
26 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
27 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
28 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
29 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
30 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
31 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
32 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
33 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
34 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38 * Provides the initialization and cleanup entry points for the DWC_otg PCI
39 * driver
41 #include <linux/kernel.h>
42 #include <linux/module.h>
43 #include <linux/moduleparam.h>
44 #include <linux/spinlock.h>
45 #include <linux/interrupt.h>
46 #include <linux/io.h>
47 #include <linux/slab.h>
48 #include <linux/pci.h>
49 #include <linux/usb.h>
51 #include <linux/usb/hcd.h>
52 #include <linux/usb/ch11.h>
53 #include <linux/platform_device.h>
54 #include <linux/usb/usb_phy_generic.h>
56 #define PCI_PRODUCT_ID_HAPS_HSOTG 0xabc0
58 static const char dwc2_driver_name[] = "dwc2-pci";
60 struct dwc2_pci_glue {
61 struct platform_device *dwc2;
62 struct platform_device *phy;
65 static void dwc2_pci_remove(struct pci_dev *pci)
67 struct dwc2_pci_glue *glue = pci_get_drvdata(pci);
69 platform_device_unregister(glue->dwc2);
70 usb_phy_generic_unregister(glue->phy);
71 kfree(glue);
72 pci_set_drvdata(pci, NULL);
75 static int dwc2_pci_probe(struct pci_dev *pci,
76 const struct pci_device_id *id)
78 struct resource res[2];
79 struct platform_device *dwc2;
80 struct platform_device *phy;
81 int ret;
82 struct device *dev = &pci->dev;
83 struct dwc2_pci_glue *glue;
85 ret = pcim_enable_device(pci);
86 if (ret) {
87 dev_err(dev, "failed to enable pci device\n");
88 return -ENODEV;
91 pci_set_master(pci);
93 dwc2 = platform_device_alloc("dwc2", PLATFORM_DEVID_AUTO);
94 if (!dwc2) {
95 dev_err(dev, "couldn't allocate dwc2 device\n");
96 return -ENOMEM;
99 memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
101 res[0].start = pci_resource_start(pci, 0);
102 res[0].end = pci_resource_end(pci, 0);
103 res[0].name = "dwc2";
104 res[0].flags = IORESOURCE_MEM;
106 res[1].start = pci->irq;
107 res[1].name = "dwc2";
108 res[1].flags = IORESOURCE_IRQ;
110 ret = platform_device_add_resources(dwc2, res, ARRAY_SIZE(res));
111 if (ret) {
112 dev_err(dev, "couldn't add resources to dwc2 device\n");
113 return ret;
116 dwc2->dev.parent = dev;
118 phy = usb_phy_generic_register();
119 if (IS_ERR(phy)) {
120 dev_err(dev, "error registering generic PHY (%ld)\n",
121 PTR_ERR(phy));
122 return PTR_ERR(phy);
125 ret = platform_device_add(dwc2);
126 if (ret) {
127 dev_err(dev, "failed to register dwc2 device\n");
128 goto err;
131 glue = kzalloc(sizeof(*glue), GFP_KERNEL);
132 if (!glue)
133 return -ENOMEM;
135 glue->phy = phy;
136 glue->dwc2 = dwc2;
137 pci_set_drvdata(pci, glue);
139 return 0;
140 err:
141 usb_phy_generic_unregister(phy);
142 platform_device_put(dwc2);
143 return ret;
146 static const struct pci_device_id dwc2_pci_ids[] = {
148 PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_PRODUCT_ID_HAPS_HSOTG),
151 PCI_DEVICE(PCI_VENDOR_ID_STMICRO,
152 PCI_DEVICE_ID_STMICRO_USB_OTG),
154 { /* end: all zeroes */ }
156 MODULE_DEVICE_TABLE(pci, dwc2_pci_ids);
158 static struct pci_driver dwc2_pci_driver = {
159 .name = dwc2_driver_name,
160 .id_table = dwc2_pci_ids,
161 .probe = dwc2_pci_probe,
162 .remove = dwc2_pci_remove,
165 module_pci_driver(dwc2_pci_driver);
167 MODULE_DESCRIPTION("DESIGNWARE HS OTG PCI Bus Glue");
168 MODULE_AUTHOR("Synopsys, Inc.");
169 MODULE_LICENSE("Dual BSD/GPL");