mmc: rtsx_pci: Enable MMC_CAP_ERASE to allow erase/discard/trim requests
[linux/fpc-iii.git] / drivers / usb / gadget / function / f_loopback.c
blob3a9f8f9c77bde8d972cdd188b4c6e3cce862471d
1 /*
2 * f_loopback.c - USB peripheral loopback configuration driver
4 * Copyright (C) 2003-2008 David Brownell
5 * Copyright (C) 2008 by Nokia Corporation
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
13 /* #define VERBOSE_DEBUG */
15 #include <linux/slab.h>
16 #include <linux/kernel.h>
17 #include <linux/device.h>
18 #include <linux/module.h>
19 #include <linux/err.h>
20 #include <linux/usb/composite.h>
22 #include "g_zero.h"
23 #include "u_f.h"
26 * LOOPBACK FUNCTION ... a testing vehicle for USB peripherals,
28 * This takes messages of various sizes written OUT to a device, and loops
29 * them back so they can be read IN from it. It has been used by certain
30 * test applications. It supports limited testing of data queueing logic.
32 struct f_loopback {
33 struct usb_function function;
35 struct usb_ep *in_ep;
36 struct usb_ep *out_ep;
38 unsigned qlen;
39 unsigned buflen;
42 static inline struct f_loopback *func_to_loop(struct usb_function *f)
44 return container_of(f, struct f_loopback, function);
47 /*-------------------------------------------------------------------------*/
49 static struct usb_interface_descriptor loopback_intf = {
50 .bLength = sizeof(loopback_intf),
51 .bDescriptorType = USB_DT_INTERFACE,
53 .bNumEndpoints = 2,
54 .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
55 /* .iInterface = DYNAMIC */
58 /* full speed support: */
60 static struct usb_endpoint_descriptor fs_loop_source_desc = {
61 .bLength = USB_DT_ENDPOINT_SIZE,
62 .bDescriptorType = USB_DT_ENDPOINT,
64 .bEndpointAddress = USB_DIR_IN,
65 .bmAttributes = USB_ENDPOINT_XFER_BULK,
68 static struct usb_endpoint_descriptor fs_loop_sink_desc = {
69 .bLength = USB_DT_ENDPOINT_SIZE,
70 .bDescriptorType = USB_DT_ENDPOINT,
72 .bEndpointAddress = USB_DIR_OUT,
73 .bmAttributes = USB_ENDPOINT_XFER_BULK,
76 static struct usb_descriptor_header *fs_loopback_descs[] = {
77 (struct usb_descriptor_header *) &loopback_intf,
78 (struct usb_descriptor_header *) &fs_loop_sink_desc,
79 (struct usb_descriptor_header *) &fs_loop_source_desc,
80 NULL,
83 /* high speed support: */
85 static struct usb_endpoint_descriptor hs_loop_source_desc = {
86 .bLength = USB_DT_ENDPOINT_SIZE,
87 .bDescriptorType = USB_DT_ENDPOINT,
89 .bmAttributes = USB_ENDPOINT_XFER_BULK,
90 .wMaxPacketSize = cpu_to_le16(512),
93 static struct usb_endpoint_descriptor hs_loop_sink_desc = {
94 .bLength = USB_DT_ENDPOINT_SIZE,
95 .bDescriptorType = USB_DT_ENDPOINT,
97 .bmAttributes = USB_ENDPOINT_XFER_BULK,
98 .wMaxPacketSize = cpu_to_le16(512),
101 static struct usb_descriptor_header *hs_loopback_descs[] = {
102 (struct usb_descriptor_header *) &loopback_intf,
103 (struct usb_descriptor_header *) &hs_loop_source_desc,
104 (struct usb_descriptor_header *) &hs_loop_sink_desc,
105 NULL,
108 /* super speed support: */
110 static struct usb_endpoint_descriptor ss_loop_source_desc = {
111 .bLength = USB_DT_ENDPOINT_SIZE,
112 .bDescriptorType = USB_DT_ENDPOINT,
114 .bmAttributes = USB_ENDPOINT_XFER_BULK,
115 .wMaxPacketSize = cpu_to_le16(1024),
118 static struct usb_ss_ep_comp_descriptor ss_loop_source_comp_desc = {
119 .bLength = USB_DT_SS_EP_COMP_SIZE,
120 .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
121 .bMaxBurst = 0,
122 .bmAttributes = 0,
123 .wBytesPerInterval = 0,
126 static struct usb_endpoint_descriptor ss_loop_sink_desc = {
127 .bLength = USB_DT_ENDPOINT_SIZE,
128 .bDescriptorType = USB_DT_ENDPOINT,
130 .bmAttributes = USB_ENDPOINT_XFER_BULK,
131 .wMaxPacketSize = cpu_to_le16(1024),
134 static struct usb_ss_ep_comp_descriptor ss_loop_sink_comp_desc = {
135 .bLength = USB_DT_SS_EP_COMP_SIZE,
136 .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
137 .bMaxBurst = 0,
138 .bmAttributes = 0,
139 .wBytesPerInterval = 0,
142 static struct usb_descriptor_header *ss_loopback_descs[] = {
143 (struct usb_descriptor_header *) &loopback_intf,
144 (struct usb_descriptor_header *) &ss_loop_source_desc,
145 (struct usb_descriptor_header *) &ss_loop_source_comp_desc,
146 (struct usb_descriptor_header *) &ss_loop_sink_desc,
147 (struct usb_descriptor_header *) &ss_loop_sink_comp_desc,
148 NULL,
151 /* function-specific strings: */
153 static struct usb_string strings_loopback[] = {
154 [0].s = "loop input to output",
155 { } /* end of list */
158 static struct usb_gadget_strings stringtab_loop = {
159 .language = 0x0409, /* en-us */
160 .strings = strings_loopback,
163 static struct usb_gadget_strings *loopback_strings[] = {
164 &stringtab_loop,
165 NULL,
168 /*-------------------------------------------------------------------------*/
170 static int loopback_bind(struct usb_configuration *c, struct usb_function *f)
172 struct usb_composite_dev *cdev = c->cdev;
173 struct f_loopback *loop = func_to_loop(f);
174 int id;
175 int ret;
177 /* allocate interface ID(s) */
178 id = usb_interface_id(c, f);
179 if (id < 0)
180 return id;
181 loopback_intf.bInterfaceNumber = id;
183 id = usb_string_id(cdev);
184 if (id < 0)
185 return id;
186 strings_loopback[0].id = id;
187 loopback_intf.iInterface = id;
189 /* allocate endpoints */
191 loop->in_ep = usb_ep_autoconfig(cdev->gadget, &fs_loop_source_desc);
192 if (!loop->in_ep) {
193 autoconf_fail:
194 ERROR(cdev, "%s: can't autoconfigure on %s\n",
195 f->name, cdev->gadget->name);
196 return -ENODEV;
199 loop->out_ep = usb_ep_autoconfig(cdev->gadget, &fs_loop_sink_desc);
200 if (!loop->out_ep)
201 goto autoconf_fail;
203 /* support high speed hardware */
204 hs_loop_source_desc.bEndpointAddress =
205 fs_loop_source_desc.bEndpointAddress;
206 hs_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress;
208 /* support super speed hardware */
209 ss_loop_source_desc.bEndpointAddress =
210 fs_loop_source_desc.bEndpointAddress;
211 ss_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress;
213 ret = usb_assign_descriptors(f, fs_loopback_descs, hs_loopback_descs,
214 ss_loopback_descs, NULL);
215 if (ret)
216 return ret;
218 DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n",
219 (gadget_is_superspeed(c->cdev->gadget) ? "super" :
220 (gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full")),
221 f->name, loop->in_ep->name, loop->out_ep->name);
222 return 0;
225 static void lb_free_func(struct usb_function *f)
227 struct f_lb_opts *opts;
229 opts = container_of(f->fi, struct f_lb_opts, func_inst);
231 mutex_lock(&opts->lock);
232 opts->refcnt--;
233 mutex_unlock(&opts->lock);
235 usb_free_all_descriptors(f);
236 kfree(func_to_loop(f));
239 static void loopback_complete(struct usb_ep *ep, struct usb_request *req)
241 struct f_loopback *loop = ep->driver_data;
242 struct usb_composite_dev *cdev = loop->function.config->cdev;
243 int status = req->status;
245 switch (status) {
246 case 0: /* normal completion? */
247 if (ep == loop->out_ep) {
249 * We received some data from the host so let's
250 * queue it so host can read the from our in ep
252 struct usb_request *in_req = req->context;
254 in_req->zero = (req->actual < req->length);
255 in_req->length = req->actual;
256 ep = loop->in_ep;
257 req = in_req;
258 } else {
260 * We have just looped back a bunch of data
261 * to host. Now let's wait for some more data.
263 req = req->context;
264 ep = loop->out_ep;
267 /* queue the buffer back to host or for next bunch of data */
268 status = usb_ep_queue(ep, req, GFP_ATOMIC);
269 if (status == 0) {
270 return;
271 } else {
272 ERROR(cdev, "Unable to loop back buffer to %s: %d\n",
273 ep->name, status);
274 goto free_req;
277 /* "should never get here" */
278 default:
279 ERROR(cdev, "%s loop complete --> %d, %d/%d\n", ep->name,
280 status, req->actual, req->length);
281 /* FALLTHROUGH */
283 /* NOTE: since this driver doesn't maintain an explicit record
284 * of requests it submitted (just maintains qlen count), we
285 * rely on the hardware driver to clean up on disconnect or
286 * endpoint disable.
288 case -ECONNABORTED: /* hardware forced ep reset */
289 case -ECONNRESET: /* request dequeued */
290 case -ESHUTDOWN: /* disconnect from host */
291 free_req:
292 usb_ep_free_request(ep == loop->in_ep ?
293 loop->out_ep : loop->in_ep,
294 req->context);
295 free_ep_req(ep, req);
296 return;
300 static void disable_loopback(struct f_loopback *loop)
302 struct usb_composite_dev *cdev;
304 cdev = loop->function.config->cdev;
305 disable_endpoints(cdev, loop->in_ep, loop->out_ep, NULL, NULL);
306 VDBG(cdev, "%s disabled\n", loop->function.name);
309 static inline struct usb_request *lb_alloc_ep_req(struct usb_ep *ep, int len)
311 struct f_loopback *loop = ep->driver_data;
313 return alloc_ep_req(ep, len, loop->buflen);
316 static int alloc_requests(struct usb_composite_dev *cdev,
317 struct f_loopback *loop)
319 struct usb_request *in_req, *out_req;
320 int i;
321 int result = 0;
324 * allocate a bunch of read buffers and queue them all at once.
325 * we buffer at most 'qlen' transfers; We allocate buffers only
326 * for out transfer and reuse them in IN transfers to implement
327 * our loopback functionality
329 for (i = 0; i < loop->qlen && result == 0; i++) {
330 result = -ENOMEM;
332 in_req = usb_ep_alloc_request(loop->in_ep, GFP_ATOMIC);
333 if (!in_req)
334 goto fail;
336 out_req = lb_alloc_ep_req(loop->out_ep, 0);
337 if (!out_req)
338 goto fail_in;
340 in_req->complete = loopback_complete;
341 out_req->complete = loopback_complete;
343 in_req->buf = out_req->buf;
344 /* length will be set in complete routine */
345 in_req->context = out_req;
346 out_req->context = in_req;
348 result = usb_ep_queue(loop->out_ep, out_req, GFP_ATOMIC);
349 if (result) {
350 ERROR(cdev, "%s queue req --> %d\n",
351 loop->out_ep->name, result);
352 goto fail_out;
356 return 0;
358 fail_out:
359 free_ep_req(loop->out_ep, out_req);
360 fail_in:
361 usb_ep_free_request(loop->in_ep, in_req);
362 fail:
363 return result;
366 static int enable_endpoint(struct usb_composite_dev *cdev,
367 struct f_loopback *loop, struct usb_ep *ep)
369 int result;
371 result = config_ep_by_speed(cdev->gadget, &(loop->function), ep);
372 if (result)
373 goto out;
375 result = usb_ep_enable(ep);
376 if (result < 0)
377 goto out;
378 ep->driver_data = loop;
379 result = 0;
381 out:
382 return result;
385 static int
386 enable_loopback(struct usb_composite_dev *cdev, struct f_loopback *loop)
388 int result = 0;
390 result = enable_endpoint(cdev, loop, loop->in_ep);
391 if (result)
392 goto out;
394 result = enable_endpoint(cdev, loop, loop->out_ep);
395 if (result)
396 goto disable_in;
398 result = alloc_requests(cdev, loop);
399 if (result)
400 goto disable_out;
402 DBG(cdev, "%s enabled\n", loop->function.name);
403 return 0;
405 disable_out:
406 usb_ep_disable(loop->out_ep);
407 disable_in:
408 usb_ep_disable(loop->in_ep);
409 out:
410 return result;
413 static int loopback_set_alt(struct usb_function *f,
414 unsigned intf, unsigned alt)
416 struct f_loopback *loop = func_to_loop(f);
417 struct usb_composite_dev *cdev = f->config->cdev;
419 /* we know alt is zero */
420 disable_loopback(loop);
421 return enable_loopback(cdev, loop);
424 static void loopback_disable(struct usb_function *f)
426 struct f_loopback *loop = func_to_loop(f);
428 disable_loopback(loop);
431 static struct usb_function *loopback_alloc(struct usb_function_instance *fi)
433 struct f_loopback *loop;
434 struct f_lb_opts *lb_opts;
436 loop = kzalloc(sizeof *loop, GFP_KERNEL);
437 if (!loop)
438 return ERR_PTR(-ENOMEM);
440 lb_opts = container_of(fi, struct f_lb_opts, func_inst);
442 mutex_lock(&lb_opts->lock);
443 lb_opts->refcnt++;
444 mutex_unlock(&lb_opts->lock);
446 loop->buflen = lb_opts->bulk_buflen;
447 loop->qlen = lb_opts->qlen;
448 if (!loop->qlen)
449 loop->qlen = 32;
451 loop->function.name = "loopback";
452 loop->function.bind = loopback_bind;
453 loop->function.set_alt = loopback_set_alt;
454 loop->function.disable = loopback_disable;
455 loop->function.strings = loopback_strings;
457 loop->function.free_func = lb_free_func;
459 return &loop->function;
462 static inline struct f_lb_opts *to_f_lb_opts(struct config_item *item)
464 return container_of(to_config_group(item), struct f_lb_opts,
465 func_inst.group);
468 static void lb_attr_release(struct config_item *item)
470 struct f_lb_opts *lb_opts = to_f_lb_opts(item);
472 usb_put_function_instance(&lb_opts->func_inst);
475 static struct configfs_item_operations lb_item_ops = {
476 .release = lb_attr_release,
479 static ssize_t f_lb_opts_qlen_show(struct config_item *item, char *page)
481 struct f_lb_opts *opts = to_f_lb_opts(item);
482 int result;
484 mutex_lock(&opts->lock);
485 result = sprintf(page, "%d\n", opts->qlen);
486 mutex_unlock(&opts->lock);
488 return result;
491 static ssize_t f_lb_opts_qlen_store(struct config_item *item,
492 const char *page, size_t len)
494 struct f_lb_opts *opts = to_f_lb_opts(item);
495 int ret;
496 u32 num;
498 mutex_lock(&opts->lock);
499 if (opts->refcnt) {
500 ret = -EBUSY;
501 goto end;
504 ret = kstrtou32(page, 0, &num);
505 if (ret)
506 goto end;
508 opts->qlen = num;
509 ret = len;
510 end:
511 mutex_unlock(&opts->lock);
512 return ret;
515 CONFIGFS_ATTR(f_lb_opts_, qlen);
517 static ssize_t f_lb_opts_bulk_buflen_show(struct config_item *item, char *page)
519 struct f_lb_opts *opts = to_f_lb_opts(item);
520 int result;
522 mutex_lock(&opts->lock);
523 result = sprintf(page, "%d\n", opts->bulk_buflen);
524 mutex_unlock(&opts->lock);
526 return result;
529 static ssize_t f_lb_opts_bulk_buflen_store(struct config_item *item,
530 const char *page, size_t len)
532 struct f_lb_opts *opts = to_f_lb_opts(item);
533 int ret;
534 u32 num;
536 mutex_lock(&opts->lock);
537 if (opts->refcnt) {
538 ret = -EBUSY;
539 goto end;
542 ret = kstrtou32(page, 0, &num);
543 if (ret)
544 goto end;
546 opts->bulk_buflen = num;
547 ret = len;
548 end:
549 mutex_unlock(&opts->lock);
550 return ret;
553 CONFIGFS_ATTR(f_lb_opts_, bulk_buflen);
555 static struct configfs_attribute *lb_attrs[] = {
556 &f_lb_opts_attr_qlen,
557 &f_lb_opts_attr_bulk_buflen,
558 NULL,
561 static struct config_item_type lb_func_type = {
562 .ct_item_ops = &lb_item_ops,
563 .ct_attrs = lb_attrs,
564 .ct_owner = THIS_MODULE,
567 static void lb_free_instance(struct usb_function_instance *fi)
569 struct f_lb_opts *lb_opts;
571 lb_opts = container_of(fi, struct f_lb_opts, func_inst);
572 kfree(lb_opts);
575 static struct usb_function_instance *loopback_alloc_instance(void)
577 struct f_lb_opts *lb_opts;
579 lb_opts = kzalloc(sizeof(*lb_opts), GFP_KERNEL);
580 if (!lb_opts)
581 return ERR_PTR(-ENOMEM);
582 mutex_init(&lb_opts->lock);
583 lb_opts->func_inst.free_func_inst = lb_free_instance;
584 lb_opts->bulk_buflen = GZERO_BULK_BUFLEN;
585 lb_opts->qlen = GZERO_QLEN;
587 config_group_init_type_name(&lb_opts->func_inst.group, "",
588 &lb_func_type);
590 return &lb_opts->func_inst;
592 DECLARE_USB_FUNCTION(Loopback, loopback_alloc_instance, loopback_alloc);
594 int __init lb_modinit(void)
596 int ret;
598 ret = usb_function_register(&Loopbackusb_func);
599 if (ret)
600 return ret;
601 return ret;
603 void __exit lb_modexit(void)
605 usb_function_unregister(&Loopbackusb_func);
608 MODULE_LICENSE("GPL");