drivers/usb/gadget/udc/atmel_usba_udc.h

   1 /*
   2  * Driver for the Atmel USBA high speed USB device controller
   3  *
   4  * Copyright (C) 2005-2007 Atmel Corporation
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10 #ifndef __LINUX_USB_GADGET_USBA_UDC_H__
  11 #define __LINUX_USB_GADGET_USBA_UDC_H__
  12
  13 /* USB register offsets */
  14 #define USBA_CTRL                               0x0000
  15 #define USBA_FNUM                               0x0004
  16 #define USBA_INT_ENB                            0x0010
  17 #define USBA_INT_STA                            0x0014
  18 #define USBA_INT_CLR                            0x0018
  19 #define USBA_EPT_RST                            0x001c
  20 #define USBA_TST                                0x00e0
  21
  22 /* USB endpoint register offsets */
  23 #define USBA_EPT_CFG                            0x0000
  24 #define USBA_EPT_CTL_ENB                        0x0004
  25 #define USBA_EPT_CTL_DIS                        0x0008
  26 #define USBA_EPT_CTL                            0x000c
  27 #define USBA_EPT_SET_STA                        0x0014
  28 #define USBA_EPT_CLR_STA                        0x0018
  29 #define USBA_EPT_STA                            0x001c
  30
  31 /* USB DMA register offsets */
  32 #define USBA_DMA_NXT_DSC                        0x0000
  33 #define USBA_DMA_ADDRESS                        0x0004
  34 #define USBA_DMA_CONTROL                        0x0008
  35 #define USBA_DMA_STATUS                         0x000c
  36
  37 /* Bitfields in CTRL */
  38 #define USBA_DEV_ADDR_OFFSET                    0
  39 #define USBA_DEV_ADDR_SIZE                      7
  40 #define USBA_FADDR_EN                           (1 <<  7)
  41 #define USBA_EN_USBA                            (1 <<  8)
  42 #define USBA_DETACH                             (1 <<  9)
  43 #define USBA_REMOTE_WAKE_UP                     (1 << 10)
  44 #define USBA_PULLD_DIS                          (1 << 11)
  45
  46 #if defined(CONFIG_AVR32)
  47 #define USBA_ENABLE_MASK                        USBA_EN_USBA
  48 #define USBA_DISABLE_MASK                       0
  49 #elif defined(CONFIG_ARCH_AT91)
  50 #define USBA_ENABLE_MASK                        (USBA_EN_USBA | USBA_PULLD_DIS)
  51 #define USBA_DISABLE_MASK                       USBA_DETACH
  52 #endif /* CONFIG_ARCH_AT91 */
  53
  54 /* Bitfields in FNUM */
  55 #define USBA_MICRO_FRAME_NUM_OFFSET             0
  56 #define USBA_MICRO_FRAME_NUM_SIZE               3
  57 #define USBA_FRAME_NUMBER_OFFSET                3
  58 #define USBA_FRAME_NUMBER_SIZE                  11
  59 #define USBA_FRAME_NUM_ERROR                    (1 << 31)
  60
  61 /* Bitfields in INT_ENB/INT_STA/INT_CLR */
  62 #define USBA_HIGH_SPEED                         (1 <<  0)
  63 #define USBA_DET_SUSPEND                        (1 <<  1)
  64 #define USBA_MICRO_SOF                          (1 <<  2)
  65 #define USBA_SOF                                (1 <<  3)
  66 #define USBA_END_OF_RESET                       (1 <<  4)
  67 #define USBA_WAKE_UP                            (1 <<  5)
  68 #define USBA_END_OF_RESUME                      (1 <<  6)
  69 #define USBA_UPSTREAM_RESUME                    (1 <<  7)
  70 #define USBA_EPT_INT_OFFSET                     8
  71 #define USBA_EPT_INT_SIZE                       16
  72 #define USBA_DMA_INT_OFFSET                     24
  73 #define USBA_DMA_INT_SIZE                       8
  74
  75 /* Bitfields in EPT_RST */
  76 #define USBA_RST_OFFSET                         0
  77 #define USBA_RST_SIZE                           16
  78
  79 /* Bitfields in USBA_TST */
  80 #define USBA_SPEED_CFG_OFFSET                   0
  81 #define USBA_SPEED_CFG_SIZE                     2
  82 #define USBA_TST_J_MODE                         (1 <<  2)
  83 #define USBA_TST_K_MODE                         (1 <<  3)
  84 #define USBA_TST_PKT_MODE                       (1 <<  4)
  85 #define USBA_OPMODE2                            (1 <<  5)
  86
  87 /* Bitfields in EPT_CFG */
  88 #define USBA_EPT_SIZE_OFFSET                    0
  89 #define USBA_EPT_SIZE_SIZE                      3
  90 #define USBA_EPT_DIR_IN                         (1 <<  3)
  91 #define USBA_EPT_TYPE_OFFSET                    4
  92 #define USBA_EPT_TYPE_SIZE                      2
  93 #define USBA_BK_NUMBER_OFFSET                   6
  94 #define USBA_BK_NUMBER_SIZE                     2
  95 #define USBA_NB_TRANS_OFFSET                    8
  96 #define USBA_NB_TRANS_SIZE                      2
  97 #define USBA_EPT_MAPPED                         (1 << 31)
  98
  99 /* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
 100 #define USBA_EPT_ENABLE                         (1 <<  0)
 101 #define USBA_AUTO_VALID                         (1 <<  1)
 102 #define USBA_INTDIS_DMA                         (1 <<  3)
 103 #define USBA_NYET_DIS                           (1 <<  4)
 104 #define USBA_DATAX_RX                           (1 <<  6)
 105 #define USBA_MDATA_RX                           (1 <<  7)
 106 /* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
 107 #define USBA_BUSY_BANK_IE                       (1 << 18)
 108
 109 /* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
 110 #define USBA_FORCE_STALL                        (1 <<  5)
 111 #define USBA_TOGGLE_CLR                         (1 <<  6)
 112 #define USBA_TOGGLE_SEQ_OFFSET                  6
 113 #define USBA_TOGGLE_SEQ_SIZE                    2
 114 #define USBA_ERR_OVFLW                          (1 <<  8)
 115 #define USBA_RX_BK_RDY                          (1 <<  9)
 116 #define USBA_KILL_BANK                          (1 <<  9)
 117 #define USBA_TX_COMPLETE                        (1 << 10)
 118 #define USBA_TX_PK_RDY                          (1 << 11)
 119 #define USBA_ISO_ERR_TRANS                      (1 << 11)
 120 #define USBA_RX_SETUP                           (1 << 12)
 121 #define USBA_ISO_ERR_FLOW                       (1 << 12)
 122 #define USBA_STALL_SENT                         (1 << 13)
 123 #define USBA_ISO_ERR_CRC                        (1 << 13)
 124 #define USBA_ISO_ERR_NBTRANS                    (1 << 13)
 125 #define USBA_NAK_IN                             (1 << 14)
 126 #define USBA_ISO_ERR_FLUSH                      (1 << 14)
 127 #define USBA_NAK_OUT                            (1 << 15)
 128 #define USBA_CURRENT_BANK_OFFSET                16
 129 #define USBA_CURRENT_BANK_SIZE                  2
 130 #define USBA_BUSY_BANKS_OFFSET                  18
 131 #define USBA_BUSY_BANKS_SIZE                    2
 132 #define USBA_BYTE_COUNT_OFFSET                  20
 133 #define USBA_BYTE_COUNT_SIZE                    11
 134 #define USBA_SHORT_PACKET                       (1 << 31)
 135
 136 /* Bitfields in DMA_CONTROL */
 137 #define USBA_DMA_CH_EN                          (1 <<  0)
 138 #define USBA_DMA_LINK                           (1 <<  1)
 139 #define USBA_DMA_END_TR_EN                      (1 <<  2)
 140 #define USBA_DMA_END_BUF_EN                     (1 <<  3)
 141 #define USBA_DMA_END_TR_IE                      (1 <<  4)
 142 #define USBA_DMA_END_BUF_IE                     (1 <<  5)
 143 #define USBA_DMA_DESC_LOAD_IE                   (1 <<  6)
 144 #define USBA_DMA_BURST_LOCK                     (1 <<  7)
 145 #define USBA_DMA_BUF_LEN_OFFSET                 16
 146 #define USBA_DMA_BUF_LEN_SIZE                   16
 147
 148 /* Bitfields in DMA_STATUS */
 149 #define USBA_DMA_CH_ACTIVE                      (1 <<  1)
 150 #define USBA_DMA_END_TR_ST                      (1 <<  4)
 151 #define USBA_DMA_END_BUF_ST                     (1 <<  5)
 152 #define USBA_DMA_DESC_LOAD_ST                   (1 <<  6)
 153
 154 /* Constants for SPEED_CFG */
 155 #define USBA_SPEED_CFG_NORMAL                   0
 156 #define USBA_SPEED_CFG_FORCE_HIGH               2
 157 #define USBA_SPEED_CFG_FORCE_FULL               3
 158
 159 /* Constants for EPT_SIZE */
 160 #define USBA_EPT_SIZE_8                         0
 161 #define USBA_EPT_SIZE_16                        1
 162 #define USBA_EPT_SIZE_32                        2
 163 #define USBA_EPT_SIZE_64                        3
 164 #define USBA_EPT_SIZE_128                       4
 165 #define USBA_EPT_SIZE_256                       5
 166 #define USBA_EPT_SIZE_512                       6
 167 #define USBA_EPT_SIZE_1024                      7
 168
 169 /* Constants for EPT_TYPE */
 170 #define USBA_EPT_TYPE_CONTROL                   0
 171 #define USBA_EPT_TYPE_ISO                       1
 172 #define USBA_EPT_TYPE_BULK                      2
 173 #define USBA_EPT_TYPE_INT                       3
 174
 175 /* Constants for BK_NUMBER */
 176 #define USBA_BK_NUMBER_ZERO                     0
 177 #define USBA_BK_NUMBER_ONE                      1
 178 #define USBA_BK_NUMBER_DOUBLE                   2
 179 #define USBA_BK_NUMBER_TRIPLE                   3
 180
 181 /* Bit manipulation macros */
 182 #define USBA_BF(name, value)                                    \
 183         (((value) & ((1 << USBA_##name##_SIZE) - 1))            \
 184          << USBA_##name##_OFFSET)
 185 #define USBA_BFEXT(name, value)                                 \
 186         (((value) >> USBA_##name##_OFFSET)                      \
 187          & ((1 << USBA_##name##_SIZE) - 1))
 188 #define USBA_BFINS(name, value, old)                            \
 189         (((old) & ~(((1 << USBA_##name##_SIZE) - 1)             \
 190                     << USBA_##name##_OFFSET))                   \
 191          | USBA_BF(name, value))
 192
 193 /* Register access macros */
 194 #ifdef CONFIG_AVR32
 195 #define usba_io_readl   __raw_readl
 196 #define usba_io_writel  __raw_writel
 197 #define usba_io_writew  __raw_writew
 198 #else
 199 #define usba_io_readl   readl_relaxed
 200 #define usba_io_writel  writel_relaxed
 201 #define usba_io_writew  writew_relaxed
 202 #endif
 203
 204 #define usba_readl(udc, reg)                                    \
 205         usba_io_readl((udc)->regs + USBA_##reg)
 206 #define usba_writel(udc, reg, value)                            \
 207         usba_io_writel((value), (udc)->regs + USBA_##reg)
 208 #define usba_ep_readl(ep, reg)                                  \
 209         usba_io_readl((ep)->ep_regs + USBA_EPT_##reg)
 210 #define usba_ep_writel(ep, reg, value)                          \
 211         usba_io_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
 212 #define usba_dma_readl(ep, reg)                                 \
 213         usba_io_readl((ep)->dma_regs + USBA_DMA_##reg)
 214 #define usba_dma_writel(ep, reg, value)                         \
 215         usba_io_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
 216
 217 /* Calculate base address for a given endpoint or DMA controller */
 218 #define USBA_EPT_BASE(x)        (0x100 + (x) * 0x20)
 219 #define USBA_DMA_BASE(x)        (0x300 + (x) * 0x10)
 220 #define USBA_FIFO_BASE(x)       ((x) << 16)
 221
 222 /* Synth parameters */
 223 #define USBA_NR_DMAS            7
 224
 225 #define EP0_FIFO_SIZE           64
 226 #define EP0_EPT_SIZE            USBA_EPT_SIZE_64
 227 #define EP0_NR_BANKS            1
 228
 229 #define FIFO_IOMEM_ID   0
 230 #define CTRL_IOMEM_ID   1
 231
 232 #define DBG_ERR         0x0001  /* report all error returns */
 233 #define DBG_HW          0x0002  /* debug hardware initialization */
 234 #define DBG_GADGET      0x0004  /* calls to/from gadget driver */
 235 #define DBG_INT         0x0008  /* interrupts */
 236 #define DBG_BUS         0x0010  /* report changes in bus state */
 237 #define DBG_QUEUE       0x0020  /* debug request queue processing */
 238 #define DBG_FIFO        0x0040  /* debug FIFO contents */
 239 #define DBG_DMA         0x0080  /* debug DMA handling */
 240 #define DBG_REQ         0x0100  /* print out queued request length */
 241 #define DBG_ALL         0xffff
 242 #define DBG_NONE        0x0000
 243
 244 #define DEBUG_LEVEL     (DBG_ERR)
 245
 246 #define DBG(level, fmt, ...)                                    \
 247         do {                                                    \
 248                 if ((level) & DEBUG_LEVEL)                      \
 249                         pr_debug("udc: " fmt, ## __VA_ARGS__);  \
 250         } while (0)
 251
 252 enum usba_ctrl_state {
 253         WAIT_FOR_SETUP,
 254         DATA_STAGE_IN,
 255         DATA_STAGE_OUT,
 256         STATUS_STAGE_IN,
 257         STATUS_STAGE_OUT,
 258         STATUS_STAGE_ADDR,
 259         STATUS_STAGE_TEST,
 260 };
 261 /*
 262   EP_STATE_IDLE,
 263   EP_STATE_SETUP,
 264   EP_STATE_IN_DATA,
 265   EP_STATE_OUT_DATA,
 266   EP_STATE_SET_ADDR_STATUS,
 267   EP_STATE_RX_STATUS,
 268   EP_STATE_TX_STATUS,
 269   EP_STATE_HALT,
 270 */
 271
 272 struct usba_dma_desc {
 273         dma_addr_t next;
 274         dma_addr_t addr;
 275         u32 ctrl;
 276 };
 277
 278 struct usba_ep {
 279         int                                     state;
 280         void __iomem                            *ep_regs;
 281         void __iomem                            *dma_regs;
 282         void __iomem                            *fifo;
 283         struct usb_ep                           ep;
 284         struct usba_udc                         *udc;
 285
 286         struct list_head                        queue;
 287
 288         u16                                     fifo_size;
 289         u8                                      nr_banks;
 290         u8                                      index;
 291         unsigned int                            can_dma:1;
 292         unsigned int                            can_isoc:1;
 293         unsigned int                            is_isoc:1;
 294         unsigned int                            is_in:1;
 295
 296 #ifdef CONFIG_USB_GADGET_DEBUG_FS
 297         u32                                     last_dma_status;
 298         struct dentry                           *debugfs_dir;
 299         struct dentry                           *debugfs_queue;
 300         struct dentry                           *debugfs_dma_status;
 301         struct dentry                           *debugfs_state;
 302 #endif
 303 };
 304
 305 struct usba_request {
 306         struct usb_request                      req;
 307         struct list_head                        queue;
 308
 309         u32                                     ctrl;
 310
 311         unsigned int                            submitted:1;
 312         unsigned int                            last_transaction:1;
 313         unsigned int                            using_dma:1;
 314         unsigned int                            mapped:1;
 315 };
 316
 317 struct usba_udc_errata {
 318         void (*toggle_bias)(struct usba_udc *udc, int is_on);
 319         void (*pulse_bias)(struct usba_udc *udc);
 320 };
 321
 322 struct usba_udc {
 323         /* Protect hw registers from concurrent modifications */
 324         spinlock_t lock;
 325
 326         /* Mutex to prevent concurrent start or stop */
 327         struct mutex vbus_mutex;
 328
 329         void __iomem *regs;
 330         void __iomem *fifo;
 331
 332         struct usb_gadget gadget;
 333         struct usb_gadget_driver *driver;
 334         struct platform_device *pdev;
 335         const struct usba_udc_errata *errata;
 336         int irq;
 337         int vbus_pin;
 338         int vbus_pin_inverted;
 339         int num_ep;
 340         struct clk *pclk;
 341         struct clk *hclk;
 342         struct usba_ep *usba_ep;
 343         bool bias_pulse_needed;
 344         bool clocked;
 345
 346         u16 devstatus;
 347
 348         u16 test_mode;
 349         int vbus_prev;
 350
 351         u32 int_enb_cache;
 352
 353 #ifdef CONFIG_USB_GADGET_DEBUG_FS
 354         struct dentry *debugfs_root;
 355         struct dentry *debugfs_regs;
 356 #endif
 357
 358         struct regmap *pmc;
 359 };
 360
 361 static inline struct usba_ep *to_usba_ep(struct usb_ep *ep)
 362 {
 363         return container_of(ep, struct usba_ep, ep);
 364 }
 365
 366 static inline struct usba_request *to_usba_req(struct usb_request *req)
 367 {
 368         return container_of(req, struct usba_request, req);
 369 }
 370
 371 static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget)
 372 {
 373         return container_of(gadget, struct usba_udc, gadget);
 374 }
 375
 376 #define ep_is_control(ep)       ((ep)->index == 0)
 377 #define ep_is_idle(ep)          ((ep)->state == EP_STATE_IDLE)
 378
 379 #endif /* __LINUX_USB_GADGET_USBA_UDC_H */