drivers/usb/gadget/udc/fsl_mxc_udc.c

   1 /*
   2  * Copyright (C) 2009
   3  * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
   4  *
   5  * Description:
   6  * Helper routines for i.MX3x SoCs from Freescale, needed by the fsl_usb2_udc.c
   7  * driver to function correctly on these systems.
   8  *
   9  * This program is free software; you can redistribute  it and/or modify it
  10  * under  the terms of  the GNU General  Public License as published by the
  11  * Free Software Foundation;  either version 2 of the  License, or (at your
  12  * option) any later version.
  13  */
  14 #include <linux/clk.h>
  15 #include <linux/delay.h>
  16 #include <linux/err.h>
  17 #include <linux/fsl_devices.h>
  18 #include <linux/platform_device.h>
  19 #include <linux/io.h>
  20
  21 #include "fsl_usb2_udc.h"
  22
  23 static struct clk *mxc_ahb_clk;
  24 static struct clk *mxc_per_clk;
  25 static struct clk *mxc_ipg_clk;
  26
  27 /* workaround ENGcm09152 for i.MX35 */
  28 #define MX35_USBPHYCTRL_OFFSET          0x600
  29 #define USBPHYCTRL_OTGBASE_OFFSET       0x8
  30 #define USBPHYCTRL_EVDO                 (1 << 23)
  31
  32 int fsl_udc_clk_init(struct platform_device *pdev)
  33 {
  34         struct fsl_usb2_platform_data *pdata;
  35         unsigned long freq;
  36         int ret;
  37
  38         pdata = dev_get_platdata(&pdev->dev);
  39
  40         mxc_ipg_clk = devm_clk_get(&pdev->dev, "ipg");
  41         if (IS_ERR(mxc_ipg_clk)) {
  42                 dev_err(&pdev->dev, "clk_get(\"ipg\") failed\n");
  43                 return PTR_ERR(mxc_ipg_clk);
  44         }
  45
  46         mxc_ahb_clk = devm_clk_get(&pdev->dev, "ahb");
  47         if (IS_ERR(mxc_ahb_clk)) {
  48                 dev_err(&pdev->dev, "clk_get(\"ahb\") failed\n");
  49                 return PTR_ERR(mxc_ahb_clk);
  50         }
  51
  52         mxc_per_clk = devm_clk_get(&pdev->dev, "per");
  53         if (IS_ERR(mxc_per_clk)) {
  54                 dev_err(&pdev->dev, "clk_get(\"per\") failed\n");
  55                 return PTR_ERR(mxc_per_clk);
  56         }
  57
  58         clk_prepare_enable(mxc_ipg_clk);
  59         clk_prepare_enable(mxc_ahb_clk);
  60         clk_prepare_enable(mxc_per_clk);
  61
  62         /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
  63         if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) {
  64                 freq = clk_get_rate(mxc_per_clk);
  65                 if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
  66                     (freq < 59999000 || freq > 60001000)) {
  67                         dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
  68                         ret = -EINVAL;
  69                         goto eclkrate;
  70                 }
  71         }
  72
  73         return 0;
  74
  75 eclkrate:
  76         clk_disable_unprepare(mxc_ipg_clk);
  77         clk_disable_unprepare(mxc_ahb_clk);
  78         clk_disable_unprepare(mxc_per_clk);
  79         mxc_per_clk = NULL;
  80         return ret;
  81 }
  82
  83 int fsl_udc_clk_finalize(struct platform_device *pdev)
  84 {
  85         struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
  86         int ret = 0;
  87
  88         /* workaround ENGcm09152 for i.MX35 */
  89         if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
  90                 unsigned int v;
  91                 struct resource *res = platform_get_resource
  92                         (pdev, IORESOURCE_MEM, 0);
  93                 void __iomem *phy_regs = ioremap(res->start +
  94                                                 MX35_USBPHYCTRL_OFFSET, 512);
  95                 if (!phy_regs) {
  96                         dev_err(&pdev->dev, "ioremap for phy address fails\n");
  97                         ret = -EINVAL;
  98                         goto ioremap_err;
  99                 }
 100
 101                 v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
 102                 writel(v | USBPHYCTRL_EVDO,
 103                         phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
 104
 105                 iounmap(phy_regs);
 106         }
 107
 108
 109 ioremap_err:
 110         /* ULPI transceivers don't need usbpll */
 111         if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
 112                 clk_disable_unprepare(mxc_per_clk);
 113                 mxc_per_clk = NULL;
 114         }
 115
 116         return ret;
 117 }
 118
 119 void fsl_udc_clk_release(void)
 120 {
 121         if (mxc_per_clk)
 122                 clk_disable_unprepare(mxc_per_clk);
 123         clk_disable_unprepare(mxc_ahb_clk);
 124         clk_disable_unprepare(mxc_ipg_clk);
 125 }