drivers/usb/gadget/udc/mv_udc.h

   1 /*
   2  * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
   3  *
   4  * This program is free software; you can redistribute  it and/or modify it
   5  * under  the terms of  the GNU General  Public License as published by the
   6  * Free Software Foundation;  either version 2 of the  License, or (at your
   7  * option) any later version.
   8  */
   9
  10 #ifndef __MV_UDC_H
  11 #define __MV_UDC_H
  12
  13 #define VUSBHS_MAX_PORTS        8
  14
  15 #define DQH_ALIGNMENT           2048
  16 #define DTD_ALIGNMENT           64
  17 #define DMA_BOUNDARY            4096
  18
  19 #define EP_DIR_IN       1
  20 #define EP_DIR_OUT      0
  21
  22 #define DMA_ADDR_INVALID        (~(dma_addr_t)0)
  23
  24 #define EP0_MAX_PKT_SIZE        64
  25 /* ep0 transfer state */
  26 #define WAIT_FOR_SETUP          0
  27 #define DATA_STATE_XMIT         1
  28 #define DATA_STATE_NEED_ZLP     2
  29 #define WAIT_FOR_OUT_STATUS     3
  30 #define DATA_STATE_RECV         4
  31
  32 #define CAPLENGTH_MASK          (0xff)
  33 #define DCCPARAMS_DEN_MASK      (0x1f)
  34
  35 #define HCSPARAMS_PPC           (0x10)
  36
  37 /* Frame Index Register Bit Masks */
  38 #define USB_FRINDEX_MASKS       0x3fff
  39
  40 /* Command Register Bit Masks */
  41 #define USBCMD_RUN_STOP                         (0x00000001)
  42 #define USBCMD_CTRL_RESET                       (0x00000002)
  43 #define USBCMD_SETUP_TRIPWIRE_SET               (0x00002000)
  44 #define USBCMD_SETUP_TRIPWIRE_CLEAR             (~USBCMD_SETUP_TRIPWIRE_SET)
  45
  46 #define USBCMD_ATDTW_TRIPWIRE_SET               (0x00004000)
  47 #define USBCMD_ATDTW_TRIPWIRE_CLEAR             (~USBCMD_ATDTW_TRIPWIRE_SET)
  48
  49 /* bit 15,3,2 are for frame list size */
  50 #define USBCMD_FRAME_SIZE_1024                  (0x00000000) /* 000 */
  51 #define USBCMD_FRAME_SIZE_512                   (0x00000004) /* 001 */
  52 #define USBCMD_FRAME_SIZE_256                   (0x00000008) /* 010 */
  53 #define USBCMD_FRAME_SIZE_128                   (0x0000000C) /* 011 */
  54 #define USBCMD_FRAME_SIZE_64                    (0x00008000) /* 100 */
  55 #define USBCMD_FRAME_SIZE_32                    (0x00008004) /* 101 */
  56 #define USBCMD_FRAME_SIZE_16                    (0x00008008) /* 110 */
  57 #define USBCMD_FRAME_SIZE_8                     (0x0000800C) /* 111 */
  58
  59 #define EPCTRL_TX_ALL_MASK                      (0xFFFF0000)
  60 #define EPCTRL_RX_ALL_MASK                      (0x0000FFFF)
  61
  62 #define EPCTRL_TX_DATA_TOGGLE_RST               (0x00400000)
  63 #define EPCTRL_TX_EP_STALL                      (0x00010000)
  64 #define EPCTRL_RX_EP_STALL                      (0x00000001)
  65 #define EPCTRL_RX_DATA_TOGGLE_RST               (0x00000040)
  66 #define EPCTRL_RX_ENABLE                        (0x00000080)
  67 #define EPCTRL_TX_ENABLE                        (0x00800000)
  68 #define EPCTRL_CONTROL                          (0x00000000)
  69 #define EPCTRL_ISOCHRONOUS                      (0x00040000)
  70 #define EPCTRL_BULK                             (0x00080000)
  71 #define EPCTRL_INT                              (0x000C0000)
  72 #define EPCTRL_TX_TYPE                          (0x000C0000)
  73 #define EPCTRL_RX_TYPE                          (0x0000000C)
  74 #define EPCTRL_DATA_TOGGLE_INHIBIT              (0x00000020)
  75 #define EPCTRL_TX_EP_TYPE_SHIFT                 (18)
  76 #define EPCTRL_RX_EP_TYPE_SHIFT                 (2)
  77
  78 #define EPCOMPLETE_MAX_ENDPOINTS                (16)
  79
  80 /* endpoint list address bit masks */
  81 #define USB_EP_LIST_ADDRESS_MASK              0xfffff800
  82
  83 #define PORTSCX_W1C_BITS                        0x2a
  84 #define PORTSCX_PORT_RESET                      0x00000100
  85 #define PORTSCX_PORT_POWER                      0x00001000
  86 #define PORTSCX_FORCE_FULL_SPEED_CONNECT        0x01000000
  87 #define PORTSCX_PAR_XCVR_SELECT                 0xC0000000
  88 #define PORTSCX_PORT_FORCE_RESUME               0x00000040
  89 #define PORTSCX_PORT_SUSPEND                    0x00000080
  90 #define PORTSCX_PORT_SPEED_FULL                 0x00000000
  91 #define PORTSCX_PORT_SPEED_LOW                  0x04000000
  92 #define PORTSCX_PORT_SPEED_HIGH                 0x08000000
  93 #define PORTSCX_PORT_SPEED_MASK                 0x0C000000
  94
  95 /* USB MODE Register Bit Masks */
  96 #define USBMODE_CTRL_MODE_IDLE                  0x00000000
  97 #define USBMODE_CTRL_MODE_DEVICE                0x00000002
  98 #define USBMODE_CTRL_MODE_HOST                  0x00000003
  99 #define USBMODE_CTRL_MODE_RSV                   0x00000001
 100 #define USBMODE_SETUP_LOCK_OFF                  0x00000008
 101 #define USBMODE_STREAM_DISABLE                  0x00000010
 102
 103 /* USB STS Register Bit Masks */
 104 #define USBSTS_INT                      0x00000001
 105 #define USBSTS_ERR                      0x00000002
 106 #define USBSTS_PORT_CHANGE              0x00000004
 107 #define USBSTS_FRM_LST_ROLL             0x00000008
 108 #define USBSTS_SYS_ERR                  0x00000010
 109 #define USBSTS_IAA                      0x00000020
 110 #define USBSTS_RESET                    0x00000040
 111 #define USBSTS_SOF                      0x00000080
 112 #define USBSTS_SUSPEND                  0x00000100
 113 #define USBSTS_HC_HALTED                0x00001000
 114 #define USBSTS_RCL                      0x00002000
 115 #define USBSTS_PERIODIC_SCHEDULE        0x00004000
 116 #define USBSTS_ASYNC_SCHEDULE           0x00008000
 117
 118
 119 /* Interrupt Enable Register Bit Masks */
 120 #define USBINTR_INT_EN                          (0x00000001)
 121 #define USBINTR_ERR_INT_EN                      (0x00000002)
 122 #define USBINTR_PORT_CHANGE_DETECT_EN           (0x00000004)
 123
 124 #define USBINTR_ASYNC_ADV_AAE                   (0x00000020)
 125 #define USBINTR_ASYNC_ADV_AAE_ENABLE            (0x00000020)
 126 #define USBINTR_ASYNC_ADV_AAE_DISABLE           (0xFFFFFFDF)
 127
 128 #define USBINTR_RESET_EN                        (0x00000040)
 129 #define USBINTR_SOF_UFRAME_EN                   (0x00000080)
 130 #define USBINTR_DEVICE_SUSPEND                  (0x00000100)
 131
 132 #define USB_DEVICE_ADDRESS_MASK                 (0xfe000000)
 133 #define USB_DEVICE_ADDRESS_BIT_SHIFT            (25)
 134
 135 struct mv_cap_regs {
 136         u32     caplength_hciversion;
 137         u32     hcsparams;      /* HC structural parameters */
 138         u32     hccparams;      /* HC Capability Parameters*/
 139         u32     reserved[5];
 140         u32     dciversion;     /* DC version number and reserved 16 bits */
 141         u32     dccparams;      /* DC Capability Parameters */
 142 };
 143
 144 struct mv_op_regs {
 145         u32     usbcmd;         /* Command register */
 146         u32     usbsts;         /* Status register */
 147         u32     usbintr;        /* Interrupt enable */
 148         u32     frindex;        /* Frame index */
 149         u32     reserved1[1];
 150         u32     deviceaddr;     /* Device Address */
 151         u32     eplistaddr;     /* Endpoint List Address */
 152         u32     ttctrl;         /* HOST TT status and control */
 153         u32     burstsize;      /* Programmable Burst Size */
 154         u32     txfilltuning;   /* Host Transmit Pre-Buffer Packet Tuning */
 155         u32     reserved[4];
 156         u32     epnak;          /* Endpoint NAK */
 157         u32     epnaken;        /* Endpoint NAK Enable */
 158         u32     configflag;     /* Configured Flag register */
 159         u32     portsc[VUSBHS_MAX_PORTS]; /* Port Status/Control x, x = 1..8 */
 160         u32     otgsc;
 161         u32     usbmode;        /* USB Host/Device mode */
 162         u32     epsetupstat;    /* Endpoint Setup Status */
 163         u32     epprime;        /* Endpoint Initialize */
 164         u32     epflush;        /* Endpoint De-initialize */
 165         u32     epstatus;       /* Endpoint Status */
 166         u32     epcomplete;     /* Endpoint Interrupt On Complete */
 167         u32     epctrlx[16];    /* Endpoint Control, where x = 0.. 15 */
 168         u32     mcr;            /* Mux Control */
 169         u32     isr;            /* Interrupt Status */
 170         u32     ier;            /* Interrupt Enable */
 171 };
 172
 173 struct mv_udc {
 174         struct usb_gadget               gadget;
 175         struct usb_gadget_driver        *driver;
 176         spinlock_t                      lock;
 177         struct completion               *done;
 178         struct platform_device          *dev;
 179         int                             irq;
 180
 181         struct mv_cap_regs __iomem      *cap_regs;
 182         struct mv_op_regs __iomem       *op_regs;
 183         void __iomem                    *phy_regs;
 184         unsigned int                    max_eps;
 185         struct mv_dqh                   *ep_dqh;
 186         size_t                          ep_dqh_size;
 187         dma_addr_t                      ep_dqh_dma;
 188
 189         struct dma_pool                 *dtd_pool;
 190         struct mv_ep                    *eps;
 191
 192         struct mv_dtd                   *dtd_head;
 193         struct mv_dtd                   *dtd_tail;
 194         unsigned int                    dtd_entries;
 195
 196         struct mv_req                   *status_req;
 197         struct usb_ctrlrequest          local_setup_buff;
 198
 199         unsigned int            resume_state;   /* USB state to resume */
 200         unsigned int            usb_state;      /* USB current state */
 201         unsigned int            ep0_state;      /* Endpoint zero state */
 202         unsigned int            ep0_dir;
 203
 204         unsigned int            dev_addr;
 205         unsigned int            test_mode;
 206
 207         int                     errors;
 208         unsigned                softconnect:1,
 209                                 vbus_active:1,
 210                                 remote_wakeup:1,
 211                                 softconnected:1,
 212                                 force_fs:1,
 213                                 clock_gating:1,
 214                                 active:1,
 215                                 stopped:1;      /* stop bit is setted */
 216
 217         struct work_struct      vbus_work;
 218         struct workqueue_struct *qwork;
 219
 220         struct usb_phy          *transceiver;
 221
 222         struct mv_usb_platform_data     *pdata;
 223
 224         /* some SOC has mutiple clock sources for USB*/
 225         struct clk      *clk;
 226 };
 227
 228 /* endpoint data structure */
 229 struct mv_ep {
 230         struct usb_ep           ep;
 231         struct mv_udc           *udc;
 232         struct list_head        queue;
 233         struct mv_dqh           *dqh;
 234         u32                     direction;
 235         char                    name[14];
 236         unsigned                stopped:1,
 237                                 wedge:1,
 238                                 ep_type:2,
 239                                 ep_num:8;
 240 };
 241
 242 /* request data structure */
 243 struct mv_req {
 244         struct usb_request      req;
 245         struct mv_dtd           *dtd, *head, *tail;
 246         struct mv_ep            *ep;
 247         struct list_head        queue;
 248         unsigned int            test_mode;
 249         unsigned                dtd_count;
 250         unsigned                mapped:1;
 251 };
 252
 253 #define EP_QUEUE_HEAD_MULT_POS                  30
 254 #define EP_QUEUE_HEAD_ZLT_SEL                   0x20000000
 255 #define EP_QUEUE_HEAD_MAX_PKT_LEN_POS           16
 256 #define EP_QUEUE_HEAD_MAX_PKT_LEN(ep_info)      (((ep_info)>>16)&0x07ff)
 257 #define EP_QUEUE_HEAD_IOS                       0x00008000
 258 #define EP_QUEUE_HEAD_NEXT_TERMINATE            0x00000001
 259 #define EP_QUEUE_HEAD_IOC                       0x00008000
 260 #define EP_QUEUE_HEAD_MULTO                     0x00000C00
 261 #define EP_QUEUE_HEAD_STATUS_HALT               0x00000040
 262 #define EP_QUEUE_HEAD_STATUS_ACTIVE             0x00000080
 263 #define EP_QUEUE_CURRENT_OFFSET_MASK            0x00000FFF
 264 #define EP_QUEUE_HEAD_NEXT_POINTER_MASK         0xFFFFFFE0
 265 #define EP_QUEUE_FRINDEX_MASK                   0x000007FF
 266 #define EP_MAX_LENGTH_TRANSFER                  0x4000
 267
 268 struct mv_dqh {
 269         /* Bits 16..26 Bit 15 is Interrupt On Setup */
 270         u32     max_packet_length;
 271         u32     curr_dtd_ptr;           /* Current dTD Pointer */
 272         u32     next_dtd_ptr;           /* Next dTD Pointer */
 273         /* Total bytes (16..30), IOC (15), INT (8), STS (0-7) */
 274         u32     size_ioc_int_sts;
 275         u32     buff_ptr0;              /* Buffer pointer Page 0 (12-31) */
 276         u32     buff_ptr1;              /* Buffer pointer Page 1 (12-31) */
 277         u32     buff_ptr2;              /* Buffer pointer Page 2 (12-31) */
 278         u32     buff_ptr3;              /* Buffer pointer Page 3 (12-31) */
 279         u32     buff_ptr4;              /* Buffer pointer Page 4 (12-31) */
 280         u32     reserved1;
 281         /* 8 bytes of setup data that follows the Setup PID */
 282         u8      setup_buffer[8];
 283         u32     reserved2[4];
 284 };
 285
 286
 287 #define DTD_NEXT_TERMINATE              (0x00000001)
 288 #define DTD_IOC                         (0x00008000)
 289 #define DTD_STATUS_ACTIVE               (0x00000080)
 290 #define DTD_STATUS_HALTED               (0x00000040)
 291 #define DTD_STATUS_DATA_BUFF_ERR        (0x00000020)
 292 #define DTD_STATUS_TRANSACTION_ERR      (0x00000008)
 293 #define DTD_RESERVED_FIELDS             (0x00007F00)
 294 #define DTD_ERROR_MASK                  (0x68)
 295 #define DTD_ADDR_MASK                   (0xFFFFFFE0)
 296 #define DTD_PACKET_SIZE                 0x7FFF0000
 297 #define DTD_LENGTH_BIT_POS              (16)
 298
 299 struct mv_dtd {
 300         u32     dtd_next;
 301         u32     size_ioc_sts;
 302         u32     buff_ptr0;              /* Buffer pointer Page 0 */
 303         u32     buff_ptr1;              /* Buffer pointer Page 1 */
 304         u32     buff_ptr2;              /* Buffer pointer Page 2 */
 305         u32     buff_ptr3;              /* Buffer pointer Page 3 */
 306         u32     buff_ptr4;              /* Buffer pointer Page 4 */
 307         u32     scratch_ptr;
 308         /* 32 bytes */
 309         dma_addr_t td_dma;              /* dma address for this td */
 310         struct mv_dtd *next_dtd_virt;
 311 };
 312
 313 #endif